[ 0.185425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.186090] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.186754] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.186757] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.187448] PCI host bridge to bus 0000:00 [ 0.187452] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.187455] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.187457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.187460] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.187463] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff window] [ 0.187466] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.187485] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.187524] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.187527] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.187710] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.187729] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.187740] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.187747] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07] [ 0.187972] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.187990] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit] [ 0.188235] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.188311] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f] [ 0.188593] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.188628] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff] [ 0.188761] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.188975] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.189014] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit] [ 0.189153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.189374] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.189614] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.189846] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.190005] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.190260] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.190419] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190677] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.190754] pci 0000:00:1d.0: reg 0x20: [io 0xd800-0xd81f] [ 0.191014] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.191090] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f] [ 0.191351] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.191428] pci 0000:00:1d.2: reg 0x20: [io 0xd400-0xd41f] [ 0.191703] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.191737] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff] [ 0.191870] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.192076] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.192368] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.192717] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.192751] pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087] [ 0.192765] pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003] [ 0.192779] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07] [ 0.192792] pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883] [ 0.192806] pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc81f] [ 0.192820] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff] [ 0.192900] pci 0000:00:1f.2: PME# supported from D3hot [ 0.193174] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.193328] pci 0000:02:00.0: [1814:3091] type 00 class 0x028000 [ 0.193399] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff] [ 0.193929] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.193939] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.194072] pci 0000:03:00.0: [1969:1063] type 00 class 0x020000 [ 0.194123] pci 0000:03:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.194141] pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.194317] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194541] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.194547] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.194553] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.194591] pci_bus 0000:04: extended config space not accessible [ 0.194700] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.194717] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.194720] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.194723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.194725] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.194728] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff window] (subtractive decode) [ 0.196018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) [ 0.196177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) [ 0.196334] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.196493] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) [ 0.196650] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. [ 0.196815] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.196974] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12) [ 0.197131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12) [ 0.197595] ACPI: EC: interrupt unblocked [ 0.197597] ACPI: EC: event unblocked [ 0.197672] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.197674] ACPI: EC: GPE=0x1b [ 0.197679] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete [ 0.197682] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.197809] iommu: Default domain type: Translated [ 0.197874] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.197878] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.197885] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.197886] vgaarb: loaded [ 0.198307] SCSI subsystem initialized [ 0.198407] libata version 3.00 loaded. [ 0.198416] ACPI: bus type USB registered [ 0.198444] usbcore: registered new interface driver usbfs [ 0.198460] usbcore: registered new interface driver hub [ 0.198482] usbcore: registered new device driver usb [ 0.198679] pps_core: LinuxPPS API ver. 1 registered [ 0.198681] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.198688] PTP clock support registered [ 0.198700] EDAC MC: Ver: 3.0.0 [ 0.199001] PCI: Using ACPI for IRQ routing [ 0.211362] PCI: pci_cache_line_size set to 64 bytes [ 0.211453] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.211455] e820: reserve RAM buffer [mem 0xbdda0000-0xbfffffff] [ 0.211684] NetLabel: Initializing [ 0.211686] NetLabel: domain hash size = 128 [ 0.211687] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.211717] NetLabel: unlabeled traffic allowed by default [ 0.211832] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.211836] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.211842] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.213422] clocksource: Switched to clocksource tsc-early [ 0.243202] VFS: Disk quotas dquot_6.6.0 [ 0.243233] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.243372] pnp: PnP ACPI init [ 0.243539] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.243552] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.243667] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.243785] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.243932] pnp 00:03: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.244412] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.244416] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.244419] system 00:04: [io 0x0400-0x041f] has been reserved [ 0.244428] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.244432] system 00:04: [mem 0xfe9fac00-0xfe9facff window] has been reserved [ 0.244436] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.244439] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.244442] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.244445] system 00:04: [mem 0xfed90000-0xfed90fff] has been reserved [ 0.244448] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved [ 0.244451] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved [ 0.244455] system 00:04: [mem 0xfed93000-0xfed93fff] has been reserved [ 0.244458] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.244461] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved [ 0.244471] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.244738] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved [ 0.244742] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.244752] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.244920] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.244930] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245109] system 00:07: [io 0x0250-0x0253] has been reserved [ 0.245113] system 00:07: [io 0x0256-0x025f] has been reserved [ 0.245117] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.245120] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.245123] system 00:07: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.245126] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved [ 0.245130] system 00:07: [mem 0xfec28000-0xfec2ffff] has been reserved [ 0.245139] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245335] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.245344] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.245946] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.245950] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.245954] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.245957] system 00:09: [mem 0x00100000-0xbddfffff] could not be reserved [ 0.245966] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.246341] pnp: PnP ACPI: found 10 devices [ 0.253920] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.254009] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.254014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.254018] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.254032] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbde00000-0xbdffffff] [ 0.254042] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.254047] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.254051] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.254056] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.254063] pci 0000:00:1c.0: bridge window [mem 0xbde00000-0xbdffffff] [ 0.254069] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.254079] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.254086] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.254098] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.254102] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.254109] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.254122] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.254140] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.254143] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.254146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.254148] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.254151] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff window] [ 0.254154] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.254156] pci_bus 0000:01: resource 1 [mem 0xbde00000-0xbdffffff] [ 0.254159] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.254162] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.254164] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.254167] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.254170] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.254172] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.254175] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.254177] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.254180] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xffffffff window] [ 0.254379] NET: Registered protocol family 2 [ 0.254749] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.254867] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.255693] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.255819] TCP: Hash tables configured (established 32768 bind 32768) [ 0.256037] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.256079] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.256275] NET: Registered protocol family 1 [ 0.256284] NET: Registered protocol family 44 [ 0.256305] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.257722] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.257729] PCI: CLS 32 bytes, default 64 [ 0.257817] Trying to unpack rootfs image as initramfs... [ 0.533860] Freeing initrd memory: 9224K [ 0.534050] check: Scanning for low memory corruption every 60 seconds [ 0.534717] Initialise system trusted keyrings [ 0.534736] Key type blacklist registered [ 0.534850] workingset: timestamp_bits=41 max_order=20 bucket_order=0 [ 0.537575] zbud: loaded [ 0.545183] Key type asymmetric registered [ 0.545187] Asymmetric key parser 'x509' registered [ 0.545201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.545284] io scheduler mq-deadline registered [ 0.545286] io scheduler kyber registered [ 0.545332] io scheduler bfq registered [ 0.545616] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.545919] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 [ 0.545972] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 0.546429] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 [ 0.546747] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26 [ 0.546924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.547064] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.547066] vesafb: scrolling: redraw [ 0.547068] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.547091] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k [ 0.547161] fbcon: Deferring console take-over [ 0.547164] fb0: VESA VGA frame buffer device [ 0.547190] intel_idle: MWAIT substates: 0x3122220 [ 0.547443] Monitor-Mwait will be used to enter C-1 state [ 0.547454] Monitor-Mwait will be used to enter C-3 state [ 0.547462] ACPI: \_PR_.P001: Found 2 idle states [ 0.547714] intel_idle: v0.5.1 model 0x17 [ 0.547798] intel_idle: Local APIC timer is reliable in C1 [ 0.547923] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.551120] ACPI: Sleep Button [SLPB] [ 0.551193] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.551226] ACPI: Lid Switch [LID] [ 0.551287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.551342] ACPI: Power Button [PWRF] [ 0.556503] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.556505] ACPI: Thermal Zone [THRM] (53 C) [ 0.556831] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.557655] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 0.557657] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 0.558333] ahci 0000:00:1f.2: version 3.0 [ 0.558551] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.558581] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 0.558585] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.559327] scsi host0: ahci [ 0.559554] scsi host1: ahci [ 0.559736] scsi host2: ahci [ 0.559923] scsi host3: ahci [ 0.560008] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 27 [ 0.560011] ata2: DUMMY [ 0.560012] ata3: DUMMY [ 0.560014] ata4: DUMMY [ 0.560106] usbcore: registered new interface driver usbserial_generic [ 0.560115] usbserial: USB Serial support registered for generic [ 0.560149] rtc_cmos 00:01: RTC can wake from S4 [ 0.560537] rtc_cmos 00:01: registered as rtc0 [ 0.560574] rtc_cmos 00:01: setting system clock to 2020-06-20T09:11:26 UTC (1592644286) [ 0.560609] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.560740] intel_pstate: CPU model not supported [ 0.560769] ledtrig-cpu: registered to indicate activity on CPUs [ 0.560843] drop_monitor: Initializing network drop monitor service [ 0.561173] NET: Registered protocol family 10 [ 0.571253] Segment Routing with IPv6 [ 0.571255] RPL Segment Routing with IPv6 [ 0.571308] NET: Registered protocol family 17 [ 0.571532] RAS: Correctable Errors collector initialized. [ 0.571603] microcode: sig=0x1067a, pf=0x80, revision=0xa07 [ 0.571669] microcode: Microcode Update Driver: v2.2. [ 0.571677] IPI shorthand broadcast: enabled [ 0.571691] sched_clock: Marking stable (590629864, -19990725)->(851768826, -281129687) [ 0.571801] registered taskstats version 1 [ 0.571816] Loading compiled-in X.509 certificates [ 0.578144] Loaded X.509 cert 'Build time autogenerated kernel key: 7e547fcebc795c02bb2dce0987a5933bc8b0a167' [ 0.578348] zswap: loaded using pool lz4/z3fold [ 0.578551] Key type ._fscrypt registered [ 0.578553] Key type .fscrypt registered [ 0.578555] Key type fscrypt-provisioning registered [ 0.587684] Key type big_key registered [ 0.588337] PM: Magic number: 8:73:172 [ 0.680469] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.681826] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 0.681918] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 0.681922] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 0.682635] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133 [ 0.682638] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 0.683552] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 0.683643] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 0.683647] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 0.684399] ata1.00: configured for UDMA/133 [ 0.697767] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5 [ 0.698186] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.698190] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.698212] sd 0:0:0:0: [sda] Write Protect is off [ 0.698216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.698254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.702654] sda: sda1 [ 0.703127] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.706014] Freeing unused decrypted memory: 2040K [ 0.706936] Freeing unused kernel image (initmem) memory: 1628K [ 0.709273] Write protecting the kernel read-only data: 22528k [ 0.710941] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.711272] Freeing unused kernel image (rodata/data gap) memory: 384K [ 0.755745] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large: [ 0.755748] clocksource: 'hpet' wd_now: 1219b54 wd_last: b3482d mask: ffffffff [ 0.755750] clocksource: 'tsc-early' cs_now: 45287ef22 cs_last: 43e4e5905 mask: ffffffffffffffff [ 0.755754] tsc: Marking TSC unstable due to clocksource watchdog [ 0.755759] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 0.755762] sched_clock: Marking unstable (775749432, -19990725)<-(1036888369, -281129687) [ 0.759109] clocksource: Switched to clocksource hpet [ 0.765749] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.765749] x86/mm: Checking user space page tables [ 0.765749] random: fast init done [ 0.765749] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.765749] Run /init as init process [ 0.765749] with arguments: [ 0.765749] /init [ 0.765749] with environment: [ 0.765749] HOME=/ [ 0.765749] TERM=linux [ 0.765749] BOOT_IMAGE=/boot/vmlinuz-linux [ 0.765749] fbcon: Taking over console [ 0.765749] Console: switching to colour frame buffer device 128x48 [ 1.225684] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.229463] i8042: Detected active multiplexing controller, rev 1.1 [ 1.245093] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.256717] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.256790] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.256843] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.256896] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.280506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.286171] ehci-pci: EHCI PCI platform driver [ 1.286412] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.286423] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.286441] ehci-pci 0000:00:1a.7: debug port 1 [ 1.308041] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.308076] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00 [ 1.320057] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.320160] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 1.320164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.320167] usb usb1: Product: EHCI Host Controller [ 1.320169] usb usb1: Manufacturer: Linux 5.7.4-arch1-1 ehci_hcd [ 1.320172] usb usb1: SerialNumber: ... [ 1.320380] hub 1-0:1.0: USB hub found [ 1.320395] hub 1-0:1.0: 2 ports detected [ 1.320858] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.320869] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.320886] ehci-pci 0000:00:1d.7: debug port 1 [ 1.324803] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.324826] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800 [ 1.336706] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.336830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 1.336834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.336837] usb usb2: Product: EHCI Host Controller [ 1.336839] usb usb2: Manufacturer: Linux 5.7.4-arch1-1 ehci_hcd [ 1.336842] usb usb2: SerialNumber: ... [ 1.337042] hub 2-0:1.0: USB hub found [ 1.337057] hub 2-0:1.0: 6 ports detected [ 1.350609] uhci_hcd: USB Universal Host Controller Interface driver [ 1.350818] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.350829] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.350840] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.350887] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 1.353483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 1.353487] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.353490] usb usb3: Product: UHCI Host Controller [ 1.353493] usb usb3: Manufacturer: Linux 5.7.4-arch1-1 uhci_hcd [ 1.353495] usb usb3: SerialNumber: ... [ 1.353680] hub 3-0:1.0: USB hub found [ 1.353976] hub 3-0:1.0: 2 ports detected [ 1.354623] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.354632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.354641] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.354667] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 [ 1.355663] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 1.355666] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.355669] usb usb4: Product: UHCI Host Controller [ 1.355672] usb usb4: Manufacturer: Linux 5.7.4-arch1-1 uhci_hcd [ 1.355674] usb usb4: SerialNumber: ... [ 1.355848] hub 4-0:1.0: USB hub found [ 1.356473] hub 4-0:1.0: 2 ports detected [ 1.358082] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.358095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.358105] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.358143] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.359577] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 1.359581] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.359583] usb usb5: Product: UHCI Host Controller [ 1.359586] usb usb5: Manufacturer: Linux 5.7.4-arch1-1 uhci_hcd [ 1.359589] usb usb5: SerialNumber: ... [ 1.359761] hub 5-0:1.0: USB hub found [ 1.359776] hub 5-0:1.0: 2 ports detected [ 1.360743] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.360752] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.360762] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.360788] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 [ 1.363088] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 1.363092] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.363095] usb usb6: Product: UHCI Host Controller [ 1.363097] usb usb6: Manufacturer: Linux 5.7.4-arch1-1 uhci_hcd [ 1.363100] usb usb6: SerialNumber: ... [ 1.363715] hub 6-0:1.0: USB hub found [ 1.363737] hub 6-0:1.0: 2 ports detected [ 1.450576] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.650228] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.842404] usb 1-1: New USB device found, idVendor=064e, idProduct=a116, bcdDevice= 2.43 [ 1.842408] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 1.842410] usb 1-1: Product: USB2.0 UVC 1.3M WebCam [ 1.842413] usb 1-1: Manufacturer: SuYin [ 1.842415] usb 1-1: SerialNumber: ... [ 1.866719] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.057950] usb 5-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.057954] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.057957] usb 5-1: Product: USB Receiver [ 2.057959] usb 5-1: Manufacturer: Logitech [ 2.076620] hid: raw HID events driver (C) Jiri Kosina [ 2.091364] usbcore: registered new interface driver usbhid [ 2.091366] usbhid: USB HID core driver [ 2.098584] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/0003:046D:C534.0001/input/input8 [ 2.153722] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 2.154966] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:046D:C534.0002/input/input9 [ 2.155179] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:046D:C534.0002/input/input10 [ 2.210400] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:046D:C534.0002/input/input11 [ 2.211017] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [ 2.247148] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 2.376027] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [ 2.436918] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 2.437903] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14 [ 2.437964] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1d.1-1/input1:2 [ 2.457142] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input18 [ 2.457296] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1d.1-1/input1:2 [ 2.850232] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 3.037951] usb 5-2: New USB device found, idVendor=0b05, idProduct=1751, bcdDevice= 2.35 [ 3.037955] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.037957] usb 5-2: Product: BT-253 [ 3.037960] usb 5-2: Manufacturer: Broadcom Corp [ 3.037962] usb 5-2: SerialNumber: ... [ 4.415873] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.030621] systemd[1]: systemd 245.6-7-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.046969] systemd[1]: Detected architecture x86-64. [ 6.090325] systemd[1]: Set hostname to ... [ 6.223634] random: crng init done [ 10.079751] systemd[1]: Created slice system-getty.slice. [ 10.080625] systemd[1]: Created slice system-modprobe.slice. [ 10.081333] systemd[1]: Created slice User and Session Slice. [ 10.081494] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 10.081615] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.082001] systemd[1]: Set up automount ... [ 10.082062] systemd[1]: Reached target Local Encrypted Volumes. [ 10.082134] systemd[1]: Reached target Remote File Systems. [ 10.082173] systemd[1]: Reached target Slices. [ 10.082332] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.087930] systemd[1]: Listening on LVM2 metadata daemon socket. [ 10.088131] systemd[1]: Listening on LVM2 poll daemon socket. [ 10.102844] systemd[1]: Listening on Process Core Dump Socket. [ 10.102972] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.103304] systemd[1]: Listening on Journal Audit Socket. [ 10.103563] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.103811] systemd[1]: Listening on Journal Socket. [ 10.104028] systemd[1]: Listening on udev Control Socket. [ 10.104188] systemd[1]: Listening on udev Kernel Socket. [ 10.106504] systemd[1]: Mounting Huge Pages File System... [ 10.108845] systemd[1]: Mounting POSIX Message Queue File System... [ 10.113284] systemd[1]: Mounting Kernel Debug File System... [ 10.118141] systemd[1]: Mounting Kernel Trace File System... [ 10.121963] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.125791] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 10.132045] systemd[1]: Starting Load Kernel Module drm... [ 10.200856] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.200947] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.203963] systemd[1]: Starting Journal Service... [ 10.300954] systemd[1]: Starting Load Kernel Modules... [ 10.308383] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.313666] systemd[1]: Starting udev Coldplug all Devices... [ 10.319803] systemd[1]: Mounted Huge Pages File System. [ 10.323478] systemd[1]: Mounted POSIX Message Queue File System. [ 10.323768] systemd[1]: Mounted Kernel Debug File System. [ 10.324041] systemd[1]: Mounted Kernel Trace File System. [ 10.325520] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 10.397504] EXT4-fs (sda1): re-mounted. Opts: XXXX=ordered [ 10.402655] systemd[1]: Finished Remount Root and Kernel File Systems. [ 10.406928] systemd[1]: Activating swap /swapfile... [ 10.407019] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 10.531773] Linux agpgart interface v0.103 [ 10.673437] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 10.675583] systemd[1]: Starting Load/Save Random Seed... [ 10.684465] systemd[1]: Starting Create System Users... [ 10.686409] systemd[1]: Finished Load Kernel Modules. [ 10.687438] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 10.693972] systemd[1]: Mounting Kernel Configuration File System... [ 10.701487] systemd[1]: Starting Apply Kernel Variables... [ 10.717177] systemd[1]: Mounted Kernel Configuration File System. [ 10.973583] systemd[1]: Finished Load/Save Random Seed. [ 10.977248] systemd[1]: Finished Apply Kernel Variables. [ 11.004235] systemd[1]: XXX@XXX: Succeeded. [ 11.005001] systemd[1]: Finished Load Kernel Module drm. [ 11.121218] systemd[1]: Finished udev Coldplug all Devices. [ 11.215745] systemd[1]: Finished Create System Users. [ 11.220345] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.517943] systemd[1]: Finished Create Static Device Nodes in /dev. [ 11.524138] systemd[1]: Starting udev Kernel Device Manager... [ 12.050041] Adding 3145724k swap on /swapfile. Priority:-2 extents:8 across:3784700k FS [ 12.050167] systemd[1]: Activated swap /swapfile. [ 12.050328] systemd[1]: Reached target Swap. [ 12.103223] systemd[1]: Mounting Temporary Directory (/tmp)... [ 12.109335] systemd[1]: Mounted Temporary Directory (/tmp). [ 12.906927] systemd[1]: Started Journal Service. [ 13.035820] systemd-journald[189]: Received client request to flush runtime journal. [ 16.463915] ACPI: AC Adapter [AC0] (on-line) [ 16.910394] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMIO) (20200326/utaddress-204) [ 16.910405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.910409] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20200326/utaddress-204) [ 16.910415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.910417] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20200326/utaddress-204) [ 16.910423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.910424] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.961375] asus_laptop: Asus Laptop Support version 0.42 [ 16.961631] asus_laptop: UX30 model detected [ 16.965747] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input19 [ 17.041116] battery: ACPI: Battery Slot [BAT0] (battery present) [ 17.646316] input: PC Speaker as /devices/platform/pcspkr/input/input20 [ 18.018818] mc: Linux media interface: v0.10 [ 18.038785] mousedev: PS/2 mouse device common for all mice [ 18.100241] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 18.100246] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.100249] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 18.100252] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 18.100254] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 18.100257] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 18.100260] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 18.420442] videodev: Linux video capture interface: v2.00 [ 18.451727] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 18.451924] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 18.452037] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 18.452150] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 [ 18.970004] iTCO_vendor_support: vendor-support=0 [ 19.020152] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 19.020228] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860) [ 19.020382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 19.020954] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.030335] Bluetooth: Core ver 2.22 [ 19.030363] NET: Registered protocol family 31 [ 19.030365] Bluetooth: HCI device and connection manager initialized [ 19.030372] Bluetooth: HCI socket layer initialized [ 19.030376] Bluetooth: L2CAP socket layer initialized [ 19.030382] Bluetooth: SCO socket layer initialized [ 19.046164] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.115274] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 19.115281] cfg80211: failed to load regulatory.db [ 19.227565] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116) [ 19.254432] uvcvideo 1-1:1.0: Entity type for entity Extension 5 was not initialized! [ 19.254437] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized! [ 19.254440] uvcvideo 1-1:1.0: Entity type for entity Processing 3 was not initialized! [ 19.254443] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized! [ 19.254565] input: USB2.0 UVC 1.3M WebCam: USB2.0 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input29 [ 19.254698] usbcore: registered new interface driver uvcvideo [ 19.254699] USB Video Class driver (1.1.1) [ 19.363573] usbcore: registered new interface driver btusb [ 19.682723] atl1c 0000:03:00.0 enp3s0: renamed from eth0 [ 19.974665] pci 0000:00:00.0: Intel GM45 Chipset [ 19.974690] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 19.975304] pci 0000:00:00.0: detected 32768K stolen memory [ 19.975339] checking generic (d0000000 300000) vs hw (fe400000 400000) [ 19.975341] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 19.975344] fb0: switching to inteldrmfb from VESA VGA [ 19.976770] Console: switching to colour dummy device 80x25 [ 19.977575] i915 0000:00:02.0: vgaarb: deactivate vga console [ 19.979623] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.981545] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 20.037067] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0 [ 20.037476] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 20.050052] acpi device:18: registered as cooling_device1 [ 20.053075] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input30 [ 20.151394] fbcon: i915drmfb (fb0) is primary device [ 20.619958] intel_powerclamp: No package C-state available [ 20.939584] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 0213 detected [ 20.943853] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0007 detected [ 20.943890] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.959710] rt2800pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 21.152042] Console: switching to colour frame buffer device 170x48 [ 21.176269] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 26.983887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.983890] Bluetooth: BNEP filters: protocol multicast [ 26.983897] Bluetooth: BNEP socket layer initialized [ 31.996073] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 32.024990] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40 [ 33.710259] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 35.383580] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 35.383589] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 37.076906] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 38.749335] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 38.749345] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 41.703412] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 43.370067] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 43.370074] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 45.060063] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 46.726925] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 46.726935] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 56.673410] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 58.340063] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 58.340070] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 59.281799] fuse: init (API version 7.31) [ 60.030049] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 60.480276] Bluetooth: RFCOMM TTY layer initialized [ 60.480285] Bluetooth: RFCOMM socket layer initialized [ 60.480295] Bluetooth: RFCOMM ver 1.11 [ 61.700260] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 61.700269] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 71.670052] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 73.340290] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 73.340300] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 75.026911] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 76.693380] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 76.693388] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 81.525300] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 81.582219] Bridge firewalling registered [ 83.498911] Initializing XFRM netlink socket [ 86.670059] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 88.336925] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 88.336939] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 90.030222] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 91.696731] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 91.696740] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 93.866604] process '...' started with executable stack [ 101.670074] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 103.336904] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 103.336913] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 105.023576] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 106.690087] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 106.690097] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 116.670102] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 117.835009] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected. [ 118.336716] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 118.336722] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 120.023373] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 121.690064] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 121.690071] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 179.820049] usb 2-2: new high-speed USB device number 4 using ehci-pci [ 179.968603] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 179.968608] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 179.968612] usb 2-2: Product: Wireless [ 179.968615] usb 2-2: Manufacturer: MediaTek Inc. [ 179.968618] usb 2-2: SerialNumber: ... [ 180.270100] usb 2-2: reset high-speed USB device number 4 using ehci-pci [ 180.418738] mt76x2u 2-2:1.0: ASIC revision: 76120044 [ 180.549173] mt76x2u 2-2:1.0: ROM patch build: 20141115060606a [ 180.731733] mt76x2u 2-2:1.0: Firmware Version: 0.0.00 [ 180.731740] mt76x2u 2-2:1.0: Build: 1 [ 180.731745] mt76x2u 2-2:1.0: Build Time: 201507311614____ [ 181.510512] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 181.547116] usbcore: registered new interface driver mt76x2u [ 181.566515] mt76x2u 2-2:1.0 wlp0s29f7u2: renamed from wlan0 [ 199.344544] wlp0s29f7u2: authenticate with XX:XX:XX:XX:XX:XX [ 199.928823] wlp0s29f7u2: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 199.933490] wlp0s29f7u2: authenticated [ 199.946695] wlp0s29f7u2: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 199.949734] wlp0s29f7u2: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [ 199.954843] wlp0s29f7u2: associated [ 200.074419] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u2: link becomes ready [ 205.569235] tun: Universal TUN/TAP device driver, 1.6 [ 205.875551] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 205.875554] wireguard: Copyright (C) A495-00C9 Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [ 296.918433] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 349.534104] perf: interrupt took too long (3144 > 3143), lowering kernel.perf_event_max_sample_rate to 63600 [ 427.794819] perf: interrupt took too long (3940 > 3930), lowering kernel.perf_event_max_sample_rate to 50700 [ 652.081585] perf: interrupt took too long (4933 > 4925), lowering kernel.perf_event_max_sample_rate to 40500 [ 1080.489584] perf: interrupt took too long (6183 > 6166), lowering kernel.perf_event_max_sample_rate to 32100 [ 1428.347846] Non-volatile memory driver v1.3 [ 1428.716779] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1428.775155] sd 0:0:0:0: Attached scsi generic sg0 type 0