[ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08 [ 0.000000] Linux version 5.10.14-desktop-1omv4002 (XXX@XXX) (gcc (GCC) 10.2.1 20201205 (OpenMandriva), GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Mon Feb 8 18:13:34 UTC 2021 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.14-desktop-1omv4002 root=UUID=HASH_96F-1C7D-A8AD-FA21-3B3EEB00615B ro quiet splash logo.nologo acpi_osi=Linux "acpi_osi=!Windows 2012" acpi_backlight=vendor audit=0 rd.timeout=120 dm_mod.use_blk_mq=1 rd.systemd.show_status=0 systemd.show_status=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf0cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf0d0000-0x00000000bf0d01ff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf0d0200-0x00000000bf0d1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf0d2000-0x00000000bf1cffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf1d0000-0x00000000bf1effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf1f0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: TOSHIBA TECRA S11/Portable PC, BIOS Version 3.50 10/23/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2393.780 MHz processor [ 0.002331] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002334] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002341] last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.002345] MTRR default type: uncachable [ 0.002345] MTRR fixed ranges enabled: [ 0.002347] 00000-9FFFF write-back [ 0.002348] A0000-BFFFF uncachable [ 0.002349] C0000-CFFFF write-protect [ 0.002349] D0000-DFFFF uncachable [ 0.002350] E0000-EFFFF write-through [ 0.002351] F0000-FFFFF write-protect [ 0.002352] MTRR variable ranges enabled: [ 0.002353] 0 base 0FFE00000 mask FFFE00000 uncachable [ 0.002354] 1 base 000000000 mask F80000000 write-back [ 0.002355] 2 base 080000000 mask FC0000000 write-back [ 0.002356] 3 base 100000000 mask FC0000000 write-back [ 0.002357] 4 disabled [ 0.002357] 5 disabled [ 0.002358] 6 disabled [ 0.002358] 7 disabled [ 0.002944] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003207] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.003215] last_pfn = 0xbf0d0 max_arch_pfn = 0x400000000 [ 0.022997] check: Scanning 1 areas for low memory corruption [ 0.023385] RAMDISK: [mem 0x30c45000-0x34619fff] [ 0.023395] ACPI: Early table checksum verification disabled [ 0.023399] ACPI: RSDP 0x00000000000F0030 000014 (v00 TOSHIB) [ 0.023404] ACPI: RSDT 0x00000000BF1EF038 000050 (v01 TOSHIB A0076 00000003 01000013) [ 0.023410] ACPI: FACP 0x00000000BF1EE000 000081 (v02 TOSHIB A0076 00000003 LOHR 0000005F) [ 0.023417] ACPI: DSDT 0x00000000BF1DC000 009D1C (v02 TOSHIB A0076 20121016 INTL 20061109) [ 0.023420] ACPI: FACS 0x00000000BF15A000 000040 [ 0.023424] ACPI: HPET 0x00000000BF1ED000 000038 (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.023428] ACPI: APIC 0x00000000BF1EC000 0000BC (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.023431] ACPI: MCFG 0x00000000BF1EB000 00003C (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.023435] ACPI: ASF! 0x00000000BF1EA000 0000A0 (v32 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.023439] ACPI: TCPA 0x00000000BF1E9000 000032 (v02 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.023443] ACPI: BOOT 0x00000000BF1E8000 000028 (v01 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.023447] ACPI: SLIC 0x00000000BF1E7000 000176 (v01 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.023450] ACPI: SSDT 0x00000000BF1DB000 0002A2 (v01 TOSHIB SataAhci 00001000 INTL 20061109) [ 0.023454] ACPI: SSDT 0x00000000BF1D8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109) [ 0.023458] ACPI: SSDT 0x00000000BF1D7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.023468] ACPI: Local APIC address 0xfee00000 [ 0.023535] No NUMA configuration found [ 0.023536] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff] [ 0.023548] NODE_DATA(0) allocated [mem 0x137fdb000-0x137ffcfff] [ 0.024066] Zone ranges: [ 0.024067] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.024069] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.024070] Normal [mem 0x0000000100000000-0x0000000137ffffff] [ 0.024072] Movable zone start for each node [ 0.024075] Early memory node ranges [ 0.024076] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.024077] node 0: [mem 0x0000000000100000-0x00000000bf0cffff] [ 0.024079] node 0: [mem 0x0000000100000000-0x0000000137ffffff] [ 0.024143] Zeroed struct page in unavailable ranges: 3987 pages [ 0.024145] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff] [ 0.024146] On node 0 totalpages: 1011821 [ 0.024148] DMA zone: 64 pages used for memmap [ 0.024148] DMA zone: 21 pages reserved [ 0.024149] DMA zone: 3997 pages, LIFO batch:0 [ 0.024191] DMA32 zone: 12164 pages used for memmap [ 0.024192] DMA32 zone: 778448 pages, LIFO batch:63 [ 0.033266] Normal zone: 3584 pages used for memmap [ 0.033269] Normal zone: 229376 pages, LIFO batch:63 [ 0.036338] ACPI: PM-Timer IO Port: 0x408 [ 0.036342] ACPI: Local APIC address 0xfee00000 [ 0.036350] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.036351] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.036352] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.036353] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.036353] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.036354] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.036355] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.036356] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.036371] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.036373] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.036375] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.036377] ACPI: IRQ0 used by override. [ 0.036378] ACPI: IRQ9 used by override. [ 0.036381] Using ACPI (MADT) for SMP configuration information [ 0.036382] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.036389] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.036413] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.036415] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.036416] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.036417] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.036417] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.036419] PM: hibernation: Registered nosave memory: [mem 0xbf0d0000-0xbf0d0fff] [ 0.036420] PM: hibernation: Registered nosave memory: [mem 0xbf0d1000-0xbf0d1fff] [ 0.036421] PM: hibernation: Registered nosave memory: [mem 0xbf0d2000-0xbf1cffff] [ 0.036422] PM: hibernation: Registered nosave memory: [mem 0xbf1d0000-0xbf1effff] [ 0.036422] PM: hibernation: Registered nosave memory: [mem 0xbf1f0000-0xbfffffff] [ 0.036423] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.036424] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.036425] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.036425] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.036426] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.036427] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.036427] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.036428] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.036429] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.036429] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.036430] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.036431] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.036432] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.036432] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.036434] [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.036435] Booting paravirtualized kernel on bare hardware [ 0.036439] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.040540] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.040955] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.040966] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.040967] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.041004] Built 1 zonelists, mobility grouping on. Total pages: 995988 [ 0.041005] Policy zone: Normal [ 0.041007] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.14-desktop-1omv4002 root=UUID=HASH_96F-1C7D-A8AD-FA21-3B3EEB00615B ro quiet splash logo.nologo acpi_osi=Linux "acpi_osi=!Windows 2012" acpi_backlight=vendor audit=0 rd.timeout=120 dm_mod.use_blk_mq=1 rd.systemd.show_status=0 systemd.show_status=0 [ 0.041815] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.042133] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.042218] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.067829] Memory: 3817420K/4047284K available (10248K kernel code, 2417K rwdata, 6340K rodata, 2048K init, 4500K bss, 229604K reserved, 0K cma-reserved) [ 0.067841] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0 [ 0.068001] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.068013] Kernel/User page tables isolation: enabled [ 0.068033] ftrace: allocating 33285 entries in 131 pages [ 0.082576] ftrace: allocated 131 pages with 3 groups [ 0.082716] rcu: Preemptible hierarchical RCU implementation. [ 0.082718] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.082719] Trampoline variant of Tasks RCU enabled. [ 0.082720] Rude variant of Tasks RCU enabled. [ 0.082720] Tracing variant of Tasks RCU enabled. [ 0.082721] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.082722] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.087730] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.088087] Console: colour dummy device 80x25 [ 0.088104] printk: console [tty0] enabled [ 0.088119] ACPI: Core revision 20200925 [ 0.088238] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.088257] APIC: Switch to symmetric I/O mode setup [ 0.088827] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.093257] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228143b83d1, max_idle_ns: 440795305260 ns [ 0.093262] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.56 BogoMIPS (lpj=2393780) [ 0.093264] pid_max: default: 32768 minimum: 301 [ 0.093320] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.093333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.093633] process: using mwait in idle threads [ 0.093637] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.093638] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.093641] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.093643] Spectre V2 : Mitigation: Full generic retpoline [ 0.093644] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.093645] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.093647] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.093648] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.093650] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.093652] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.093774] Freeing SMP alternatives memory: 28K [ 0.196752] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2) [ 0.196909] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.196918] core: CPUID marked event: 'bus cycles' unavailable [ 0.196919] ... version: 3 [ 0.196920] ... bit width: 48 [ 0.196921] ... generic registers: 4 [ 0.196922] ... value mask: 0000ffffffffffff [ 0.196922] ... max period: 000000007fffffff [ 0.196923] ... fixed-purpose events: 3 [ 0.196924] ... event mask: 000000070000000f [ 0.197037] rcu: Hierarchical SRCU implementation. [ 0.197259] smp: Bringing up secondary CPUs ... [ 0.197259] x86: Booting SMP configuration: [ 0.197259] .... node #0, CPUs: #1 [ 0.199340] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.199434] #2 #3 [ 0.203290] smp: Brought up 1 node, 4 CPUs [ 0.203292] smpboot: Max logical packages: 2 [ 0.203295] smpboot: Total of 4 processors activated (19150.24 BogoMIPS) [ 0.204569] devtmpfs: initialized [ 0.204569] x86/mm: Memory block size: 128MB [ 0.205581] PM: Registering ACPI NVS region [mem 0xbf0d0000-0xbf0d01ff] (512 bytes) [ 0.205581] PM: Registering ACPI NVS region [mem 0xbf0d2000-0xbf1cffff] (1040384 bytes) [ 0.205581] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.205581] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.205581] pinctrl core: initialized pinctrl subsystem [ 0.205687] NET: Registered protocol family 16 [ 0.205809] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.205814] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.205818] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.206272] thermal_sys: Registered thermal governor 'fair_share' [ 0.206273] thermal_sys: Registered thermal governor 'bang_bang' [ 0.206274] thermal_sys: Registered thermal governor 'step_wise' [ 0.206275] thermal_sys: Registered thermal governor 'user_space' [ 0.206276] thermal_sys: Registered thermal governor 'power_allocator' [ 0.206291] cpuidle: using governor ladder [ 0.206291] cpuidle: using governor menu [ 0.206322] Simple Boot Flag at 0x7c set to 0x80 [ 0.206334] ACPI: bus type PCI registered [ 0.206336] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.206408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.206412] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.206429] PCI: Using configuration type 1 for base access [ 0.206622] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.206623] mtrr: probably your BIOS does not setup all CPUs. [ 0.206624] mtrr: corrected configuration. [ 0.207406] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.208292] ACPI: Added _OSI(Module Device) [ 0.208293] ACPI: Added _OSI(Processor Device) [ 0.208294] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.208295] ACPI: Added _OSI(Processor Aggregator Device) [ 0.208296] ACPI: Added _OSI(Linux-Dell-Video) [ 0.208297] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.208298] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.208299] ACPI: Added _OSI(Linux) [ 0.208300] ACPI: Deleted _OSI(Windows 2012) [ 0.213182] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.213761] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline [ 0.215750] ACPI: Dynamic OEM Table Load: [ 0.215757] ACPI: SSDT 0xFFFF9E1D40812800 000419 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.216757] ACPI: Dynamic OEM Table Load: [ 0.216764] ACPI: SSDT 0xFFFF9E1D4007D000 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.217566] ACPI: Dynamic OEM Table Load: [ 0.217571] ACPI: SSDT 0xFFFF9E1D40925400 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.218057] ACPI: Dynamic OEM Table Load: [ 0.218062] ACPI: SSDT 0xFFFF9E1D40847000 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.219485] ACPI: Interpreter enabled [ 0.219509] ACPI: (supports S0 S3 S4 S5) [ 0.219511] ACPI: Using IOAPIC for interrupt routing [ 0.219537] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.219785] ACPI: Enabled 16 GPEs in block 00 to 3F [ 0.224253] ACPI: Power Resource [PDOC] (off) [ 0.224317] acpi PNP0A05:00: ACPI dock station (docks/bays count: 1) [ 0.227711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.227717] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.227722] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.228186] PCI host bridge to bus 0000:00 [ 0.228189] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.228190] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.228192] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.228193] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.228194] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.228195] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.228197] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.228198] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.228199] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.228213] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.228234] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.228348] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400 [ 0.228388] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.228520] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.228546] pci 0000:00:16.0: reg 0x10: [mem 0xd7324000-0xd732400f 64bit] [ 0.228639] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.228753] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 [ 0.228773] pci 0000:00:19.0: reg 0x10: [mem 0xd7300000-0xd731ffff] [ 0.228783] pci 0000:00:19.0: reg 0x14: [mem 0xd732a000-0xd732afff] [ 0.228793] pci 0000:00:19.0: reg 0x18: [io 0x4020-0x403f] [ 0.228875] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.228992] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.229011] pci 0000:00:1a.0: reg 0x10: [mem 0xd7329000-0xd73293ff] [ 0.229115] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.229233] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.229257] pci 0000:00:1b.0: reg 0x10: [mem 0xd7320000-0xd7323fff 64bit] [ 0.229388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.229519] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.229637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.229769] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.229886] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.230016] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.230135] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.230277] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.230296] pci 0000:00:1d.0: reg 0x10: [mem 0xd7328000-0xd73283ff] [ 0.230398] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.230509] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.230686] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 [ 0.230895] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.230914] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f] [ 0.230925] pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f] [ 0.230935] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047] [ 0.230945] pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b] [ 0.230956] pci 0000:00:1f.2: reg 0x20: [io 0x4000-0x401f] [ 0.230966] pci 0000:00:1f.2: reg 0x24: [mem 0xd7327000-0xd73277ff] [ 0.231026] pci 0000:00:1f.2: PME# supported from D3hot [ 0.231146] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.231170] pci 0000:00:1f.6: reg 0x10: [mem 0xd7326000-0xd7326fff 64bit] [ 0.231389] pci 0000:01:00.0: [10de:0a6a] type 00 class 0x030000 [ 0.231405] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff] [ 0.231418] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.231430] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.231439] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.231447] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.231455] pci 0000:01:00.0: enabling Extended Tags [ 0.231549] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link) [ 0.231616] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.231632] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff] [ 0.231680] pci 0000:01:00.1: enabling Extended Tags [ 0.231809] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.231811] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.231814] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 0.231816] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.231949] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.231960] pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via FireWire function) [ 0.231961] pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller [ 0.231963] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 [ 0.231991] pci 0000:02:00.0: reg 0x10: [mem 0xd7202000-0xd72020ff] [ 0.232178] pci 0000:02:00.0: supports D1 D2 [ 0.232180] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232368] pci 0000:02:00.1: [1180:e230] type 00 class 0x088000 [ 0.232397] pci 0000:02:00.1: reg 0x10: [mem 0xd7201000-0xd72010ff] [ 0.232573] pci 0000:02:00.1: supports D1 D2 [ 0.232574] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232738] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.232745] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff] [ 0.232850] pci 0000:03:00.0: [8086:422c] type 00 class 0x028000 [ 0.232897] pci 0000:03:00.0: reg 0x10: [mem 0xd7100000-0xd7101fff 64bit] [ 0.233112] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.233272] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.233280] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff] [ 0.233355] acpiphp: Slot [1] registered [ 0.233361] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.233365] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.233369] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff] [ 0.233376] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref] [ 0.233401] pci_bus 0000:06: extended config space not accessible [ 0.233463] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.233475] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.233476] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.233478] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.233479] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.233480] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.233481] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.233482] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.233484] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.233745] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.233803] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.233862] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.233917] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.233972] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.234027] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.234083] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.234138] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.234349] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 0.234353] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.234399] PCI host bridge to bus 0000:ff [ 0.234401] pci_bus 0000:ff: root bus resource [bus ff] [ 0.234408] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 [ 0.234451] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.234509] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.234550] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.234592] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.234631] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.235096] iommu: Default domain type: Translated [ 0.235111] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.235111] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.235111] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.235111] vgaarb: loaded [ 0.235111] pps_core: LinuxPPS API ver. 1 registered [ 0.235111] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.235111] PTP clock support registered [ 0.235111] EDAC MC: Ver: 3.0.0 [ 0.235428] PCI: Using ACPI for IRQ routing [ 0.245527] PCI: pci_cache_line_size set to 64 bytes [ 0.245660] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.245661] e820: reserve RAM buffer [mem 0xbf0d0000-0xbfffffff] [ 0.246710] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.246718] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.248298] clocksource: Switched to clocksource tsc-early [ 0.259788] VFS: Disk quotas dquot_6.6.0 [ 0.259811] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.259890] pnp: PnP ACPI init [ 0.260154] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.260156] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.260157] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.260159] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.260160] system 00:00: [mem 0xd7400000-0xd7400fff] has been reserved [ 0.260162] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.260163] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.260164] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.260166] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved [ 0.260168] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.260177] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260481] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.260577] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.260582] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.260630] system 00:03: [io 0x1000-0x100f] has been reserved [ 0.260632] system 00:03: [io 0x1010-0x1013] has been reserved [ 0.260633] system 00:03: [io 0xffff] has been reserved [ 0.260635] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.260637] system 00:03: [io 0x0500-0x053f] has been reserved [ 0.260641] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260683] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.260685] system 00:04: [io 0x01e0-0x01e7] has been reserved [ 0.260689] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260712] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.260927] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.260965] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.260984] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.261097] pnp: PnP ACPI: found 9 devices [ 0.266794] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.266863] NET: Registered protocol family 2 [ 0.267030] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.267046] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.267126] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.267270] TCP: Hash tables configured (established 32768 bind 32768) [ 0.267345] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.267369] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.267397] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.267495] NET: Registered protocol family 44 [ 0.267502] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.267511] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.267514] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.267516] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.267518] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.267531] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd7500000-0xd76fffff 64bit pref] [ 0.267536] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref] [ 0.267539] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.267541] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff] [ 0.267545] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref] [ 0.267547] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.267550] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.267553] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 0.267555] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.267558] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.267561] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.267566] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff] [ 0.267570] pci 0000:00:1c.0: bridge window [mem 0xd7500000-0xd76fffff 64bit pref] [ 0.267577] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.267580] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff] [ 0.267585] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff] [ 0.267590] pci 0000:00:1c.1: bridge window [mem 0xd7700000-0xd78fffff 64bit pref] [ 0.267597] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.267599] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.267605] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff] [ 0.267609] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref] [ 0.267616] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.267630] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.267631] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.267633] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.267634] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.267635] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.267636] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.267637] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.267639] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window] [ 0.267640] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.267641] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff] [ 0.267642] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.267644] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.267645] pci_bus 0000:02: resource 1 [mem 0xd7200000-0xd72fffff] [ 0.267646] pci_bus 0000:02: resource 2 [mem 0xd7500000-0xd76fffff 64bit pref] [ 0.267647] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff] [ 0.267649] pci_bus 0000:03: resource 1 [mem 0xd7100000-0xd71fffff] [ 0.267650] pci_bus 0000:03: resource 2 [mem 0xd7700000-0xd78fffff 64bit pref] [ 0.267651] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.267652] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd70fffff] [ 0.267653] pci_bus 0000:04: resource 2 [mem 0xd3100000-0xd50fffff 64bit pref] [ 0.267655] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.267656] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.267657] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.267658] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.267660] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.267661] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.267662] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.267663] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xfeafffff window] [ 0.268445] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.268477] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.268577] PCI: CLS 64 bytes, default 64 [ 0.268622] Trying to unpack rootfs image as initramfs... [ 0.904601] Freeing initrd memory: 59220K [ 0.904607] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.904610] software IO TLB: mapped [mem 0x00000000bb0d0000-0x00000000bf0d0000] (64MB) [ 0.904773] check: Scanning for low memory corruption every 60 seconds [ 0.904842] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd1000000, 0x12c000 bytes, mapped to 0x(____ptrval____) [ 0.904844] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560 [ 0.904900] fbcon: Deferring console take-over [ 0.904902] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.905209] Initialise system trusted keyrings [ 0.905221] Key type blacklist registered [ 0.905291] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.906447] zbud: loaded [ 0.906590] Key type asymmetric registered [ 0.906592] Asymmetric key parser 'x509' registered [ 0.906601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.906645] io scheduler mq-deadline registered [ 0.906668] io scheduler bfq registered [ 0.907761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.907810] intel_idle: MWAIT substates: 0x1120 [ 0.907811] intel_idle: v0.5.1 model 0x25 [ 0.908017] intel_idle: Local APIC timer is reliable in all C-states [ 0.916624] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.916804] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.921029] loop: module loaded [ 0.921140] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.922434] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.922468] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.923081] mousedev: PS/2 mouse device common for all mice [ 0.923181] rtc_cmos 00:05: RTC can wake from S4 [ 0.923701] rtc_cmos 00:05: registered as rtc0 [ 0.923790] rtc_cmos 00:05: setting system clock to 2021-07-21T17:47:59 UTC (1626889679) [ 0.923810] rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs [ 0.923827] intel_pstate: CPU model not supported [ 0.924164] ledtrig-cpu: registered to indicate activity on CPUs [ 0.924624] Key type dns_resolver registered [ 0.924918] microcode: sig=0x20652, pf=0x10, revision=0x11 [ 0.924996] microcode: Microcode Update Driver: v2.2. [ 0.924999] IPI shorthand broadcast: enabled [ 0.925007] sched_clock: Marking stable (924607214, 232015)->(929841142, -5001913) [ 0.925130] registered taskstats version 1 [ 0.925133] Loading compiled-in X.509 certificates [ 0.926390] zswap: loaded using pool zstd/zbud [ 0.934515] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.040805] UKSM: relative memcmp_cost = 153 hash=2347619803 cmp_ret=0. [ 1.042337] Key type ._fscrypt registered [ 1.042338] Key type .fscrypt registered [ 1.042339] Key type fscrypt-provisioning registered [ 1.042837] RAS: Correctable Errors collector initialized. [ 1.044368] Freeing unused decrypted memory: 2036K [ 1.044836] Freeing unused kernel image (initmem) memory: 2048K [ 1.047799] Write protecting the kernel read-only data: 20480k [ 1.048700] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.049288] Freeing unused kernel image (rodata/data gap) memory: 1852K [ 1.102474] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.102558] x86/mm: Checking user space page tables [ 1.152802] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.152812] Run /init as init process [ 1.152813] with arguments: [ 1.152814] /init [ 1.152814] splash [ 1.152815] with environment: [ 1.152815] HOME=/ [ 1.152816] TERM=linux [ 1.152817] BOOT_IMAGE=/boot/vmlinuz-5.10.14-desktop-1omv4002 [ 1.158556] systemd[1]: Inserted module 'autofs4' [ 1.168276] NET: Registered protocol family 10 [ 1.173143] Segment Routing with IPv6 [ 1.173146] RPL Segment Routing with IPv6 [ 1.174117] NET: Registered protocol family 1 [ 1.174159] systemd[1]: Inserted module 'unix' [ 1.180089] systemd[1]: systemd 247 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 1.191477] systemd[1]: Detected architecture x86-64. [ 1.191487] systemd[1]: Running in initial RAM disk. [ 1.200721] random: systemd: uninitialized urandom read (16 bytes read) [ 1.200730] systemd[1]: Initializing machine ID from random generator. [ 1.290028] systemd[1]: Queued start job for default target Initrd Default Target. [ 1.290223] random: systemd: uninitialized urandom read (16 bytes read) [ 1.290240] systemd[1]: Reached target Local File Systems. [ 1.290339] random: systemd: uninitialized urandom read (16 bytes read) [ 1.290349] systemd[1]: Reached target Slices. [ 1.290377] systemd[1]: Reached target Swap. [ 1.290401] systemd[1]: Reached target Timers. [ 1.291854] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 1.292078] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.292200] systemd[1]: Listening on Journal Socket. [ 1.292353] systemd[1]: Listening on udev Control Socket. [ 1.292453] systemd[1]: Listening on udev Kernel Socket. [ 1.292480] systemd[1]: Reached target Sockets. [ 1.299907] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 1.300964] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 1.304734] systemd[1]: Starting Journal Service... [ 1.305040] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. [ 1.306542] systemd[1]: Starting Apply Kernel Variables... [ 1.307856] systemd[1]: Starting Setup Virtual Console... [ 1.309465] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 1.310962] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.324468] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.333604] systemd[1]: Finished Apply Kernel Variables. [ 1.352603] systemd[1]: Started Journal Service. [ 1.907874] device-mapper: uevent: version 1.0.3 [ 1.907976] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 1.911275] tsc: Refined TSC clocksource calibration: 2393.999 MHz [ 1.911282] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns [ 1.911297] clocksource: Switched to clocksource tsc [ 1.987268] raid6: sse2x4 gen() 3266 MB/s [ 2.013265] raid6: sse2x4 xor() 2240 MB/s [ 2.039265] raid6: sse2x2 gen() 3922 MB/s [ 2.062265] raid6: sse2x2 xor() 2817 MB/s [ 2.085266] raid6: sse2x1 gen() 3515 MB/s [ 2.102274] raid6: sse2x1 xor() 2497 MB/s [ 2.102276] raid6: using algorithm sse2x2 gen() 3922 MB/s [ 2.102277] raid6: .... xor() 2817 MB/s, rmw enabled [ 2.102279] raid6: using ssse3x2 recovery algorithm [ 2.102599] xor: measuring software checksum speed [ 2.103967] prefetch64-sse : 7261 MB/sec [ 2.105565] generic_sse : 6186 MB/sec [ 2.105566] xor: using function: prefetch64-sse (7261 MB/sec) [ 2.176201] Btrfs loaded, crc32c=crc32c-intel [ 2.197033] ACPI: bus type USB registered [ 2.197075] usbcore: registered new interface driver usbfs [ 2.197088] usbcore: registered new interface driver hub [ 2.197108] usbcore: registered new device driver usb [ 2.198518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.862780] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 2.866302] ACPI: Power Button [PWRB] [ 2.866371] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 2.866420] ACPI: Lid Switch [LID] [ 2.866473] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.866524] ACPI: Power Button [PWRF] [ 2.875736] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [ 2.876049] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 2.964217] battery: ACPI: Battery Slot [BAT1] (battery present) [ 2.988733] Linux agpgart interface v0.103 [ 3.004655] ehci-pci: EHCI PCI platform driver [ 3.004986] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.004996] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.005013] ehci-pci 0000:00:1a.0: debug port 2 [ 3.008946] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.008973] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7329000 [ 3.015308] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.015379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.015381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.015383] usb usb1: Product: EHCI Host Controller [ 3.015385] usb usb1: Manufacturer: Linux 5.10.14-desktop-1omv4002 ehci_hcd [ 3.015386] usb usb1: SerialNumber: ... [ 3.015562] hub 1-0:1.0: USB hub found [ 3.015573] hub 1-0:1.0: 3 ports detected [ 3.016067] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.016074] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.016088] ehci-pci 0000:00:1d.0: debug port 2 [ 3.020007] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.020025] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd7328000 [ 3.028643] sdhci: Secure Digital Host Controller Interface driver [ 3.028646] sdhci: Copyright(c) Pierre Ossman [ 3.030436] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.030702] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.030739] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 3.035324] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.035388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.035390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.035393] usb usb2: Product: EHCI Host Controller [ 3.035395] usb usb2: Manufacturer: Linux 5.10.14-desktop-1omv4002 ehci_hcd [ 3.035396] usb usb2: SerialNumber: ... [ 3.035577] hub 2-0:1.0: USB hub found [ 3.035587] hub 2-0:1.0: 3 ports detected [ 3.053869] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 3.067988] SCSI subsystem initialized [ 3.126032] libata version 3.00 loaded. [ 3.204511] cryptd: max_cpu_qlen set to 1000 [ 3.217379] ahci 0000:00:1f.2: version 3.0 [ 3.217817] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.217864] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 3.217868] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 3.218228] SSE version of gcm_enc/dec engaged. [ 3.224254] checking generic (d1000000 12c000) vs hw (d2000000 1000000) [ 3.224258] checking generic (d1000000 12c000) vs hw (c0000000 10000000) [ 3.224260] checking generic (d1000000 12c000) vs hw (d0000000 2000000) [ 3.226385] fb0: switching to nouveaufb from simple [ 3.226465] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 3.226551] nouveau 0000:01:00.0: NVIDIA GT218 (0a8500a2) [ 3.229328] scsi host0: ahci [ 3.235530] scsi host1: ahci [ 3.241311] scsi host2: ahci [ 3.245305] scsi host3: ahci [ 3.252386] scsi host4: ahci [ 3.257543] scsi host5: ahci [ 3.257642] ata1: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327100 irq 29 [ 3.257646] ata2: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327180 irq 29 [ 3.257648] ata3: DUMMY [ 3.257649] ata4: DUMMY [ 3.257650] ata5: DUMMY [ 3.257654] ata6: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327380 irq 29 [ 3.337281] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.337756] nouveau 0000:01:00.0: bios: version XXX.XXX.XXX.XXX.07 [ 3.341621] nouveau 0000:01:00.0: fb: 512 MiB DDR3 [ 3.362284] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.466682] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.466687] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.466978] hub 1-1:1.0: USB hub found [ 3.467050] hub 1-1:1.0: 6 ports detected [ 3.490649] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.490653] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.490943] hub 2-1:1.0: USB hub found [ 3.491020] hub 2-1:1.0: 8 ports detected [ 3.564405] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.565133] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._SDD.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 3.565142] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.565167] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 3.565174] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.565697] ata1.00: ATA-8: Hitachi HTS725032A9A360, PC3OC71E, max UDMA/133 [ 3.565700] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.566514] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._SDD.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 3.566522] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.566543] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 3.566549] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.566854] ata1.00: configured for UDMA/133 [ 3.567009] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 C71E PQ: 0 ANSI: 5 [ 3.743280] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 3.767281] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 3.823431] usb 1-1.2: New USB device found, idVendor=08ff, idProduct=168b, bcdDevice=25.01 [ 3.823436] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.823438] usb 1-1.2: Product: Fingerprint Sensor [ 3.847646] usb 2-1.5: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10 [ 3.847650] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.847943] hub 2-1.5:1.0: USB hub found [ 3.848146] hub 2-1.5:1.0: 4 ports detected [ 3.876477] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.878224] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._SDD.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 3.878233] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.878258] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 3.878274] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.878292] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100 [ 3.880731] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._SDD.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 3.880738] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.880759] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 3.880766] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 3.880779] ata2.00: configured for UDMA/100 [ 3.884461] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5 [ 3.888276] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 3.976174] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b130, bcdDevice=77.30 [ 3.976178] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.976180] usb 1-1.4: Product: USB2.0 UVC WebCam [ 3.976182] usb 1-1.4: Manufacturer: Chicony [ 3.976183] usb 1-1.4: SerialNumber: ... [ 4.042273] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 4.059544] random: fast init done [ 4.122270] usb 2-1.5.2: new full-speed USB device number 4 using ehci-pci [ 4.130684] usb 1-1.5: New USB device found, idVendor=0930, idProduct=1311, bcdDevice= 0.00 [ 4.130686] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.130688] usb 1-1.5: Product: F3607gw [ 4.130689] usb 1-1.5: Manufacturer: 0 F3607gw [ 4.130691] usb 1-1.5: SerialNumber: ... [ 4.202272] usb 2-1.5.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10 [ 4.202277] usb 2-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.202279] usb 2-1.5.2: Product: O2Micro CCID SC Reader [ 4.202281] usb 2-1.5.2: Manufacturer: O2 [ 4.212417] ata6: SATA link down (SStatus 0 SControl 300) [ 4.235836] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 4.235852] sd 0:0:0:0: [sda] Write Protect is off [ 4.235855] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.235874] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.253276] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.253279] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.278676] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.283101] random: crng init done [ 4.283106] random: 7 urandom warning(s) missed due to ratelimiting [ 4.601926] sda: sda1 [ 4.602425] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.632304] [TTM] Zone kernel: Available graphics memory: 1942450 KiB [ 4.632308] [TTM] Initializing pool allocator [ 4.632315] [TTM] Initializing DMA pool allocator [ 4.632345] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 4.632347] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 4.632352] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 4.632355] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 4.632358] nouveau 0000:01:00.0: DRM: DCB outp 00: 010003f3 00010035 [ 4.632361] nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000000 [ 4.632363] nouveau 0000:01:00.0: DRM: DCB outp 02: 02822362 00020010 [ 4.632365] nouveau 0000:01:00.0: DRM: DCB outp 03: 01833310 00000000 [ 4.632367] nouveau 0000:01:00.0: DRM: DCB outp 04: 088443c6 0f220010 [ 4.632370] nouveau 0000:01:00.0: DRM: DCB outp 05: 08844382 00020010 [ 4.632372] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040 [ 4.632374] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100 [ 4.632376] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001231 [ 4.632378] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000351 [ 4.632380] nouveau 0000:01:00.0: DRM: DCB conn 04: 00202446 [ 4.632389] nouveau 0000:01:00.0: DRM: BIOS FP mode: 1600x900 (97790kHz pixel clock) [ 4.635367] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 4.636327] nouveau 0000:01:00.0: DRM: unknown connector type 51 [ 4.725907] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x70000, bo 00000000b41aca17 [ 4.728472] fbcon: nouveaudrmfb (fb0) is primary device [ 4.728474] fbcon: Deferring console take-over [ 4.728477] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 4.737415] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 5.173767] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.514129] systemd-journald[138]: Received SIGTERM from PID 1 (systemd). [ 8.892228] systemd[1]: systemd 247 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 8.904461] systemd[1]: Detected architecture x86-64. [ 8.933221] systemd[1]: Set hostname to ... [ 10.360828] systemd[1]: /lib/systemd/system/nscd.socket:5: ListenDatagram= references a path below legacy directory /var/run/, updating /var/run/nscd/socket \xe2\x86\x92 /run/nscd/socket; please update the unit file accordingly. [ 10.831976] systemd[1]: initrd-switch-root.service: Succeeded. [ 10.832471] systemd[1]: Stopped Switch Root. [ 10.832850] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 10.833353] systemd[1]: Created slice system-getty.slice. [ 10.833744] systemd[1]: Created slice system-modprobe.slice. [ 10.834109] systemd[1]: Created slice User and Session Slice. [ 10.834166] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 10.834245] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.834515] systemd[1]: Set up automount ... [ 10.834578] systemd[1]: Reached target Local Encrypted Volumes. [ 10.834628] systemd[1]: Reached target Login Prompts. [ 10.834687] systemd[1]: Stopped target Switch Root. [ 10.834737] systemd[1]: Stopped target Initrd File Systems. [ 10.834774] systemd[1]: Stopped target Initrd Root File System. [ 10.834844] systemd[1]: Reached target Remote Encrypted Volumes. [ 10.834888] systemd[1]: Reached target Remote File Systems. [ 10.834938] systemd[1]: Reached target Slices. [ 10.834990] systemd[1]: Reached target Swap. [ 10.835121] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.835276] systemd[1]: Listening on multipathd control socket. [ 10.840593] systemd[1]: Listening on RPCbind Server Activation Socket. [ 10.840718] systemd[1]: Reached target RPC Port Mapper. [ 10.849163] systemd[1]: Listening on Process Core Dump Socket. [ 10.849392] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.849591] systemd[1]: Listening on udev Control Socket. [ 10.849758] systemd[1]: Listening on udev Kernel Socket. [ 10.851099] systemd[1]: Mounting Huge Pages File System... [ 10.852346] systemd[1]: Mounting POSIX Message Queue File System... [ 10.853648] systemd[1]: Mounting Kernel Debug File System... [ 10.854922] systemd[1]: Mounting Kernel Trace File System... [ 10.894412] systemd[1]: Mounting Temporary Directory (/tmp)... [ 10.895829] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.897482] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 10.898979] systemd[1]: Starting Load Kernel Module configfs... [ 10.900790] systemd[1]: Starting Load Kernel Module drm... [ 10.902553] systemd[1]: Starting Load Kernel Module fuse... [ 10.903003] systemd[1]: plymouth-switch-root.service: Succeeded. [ 10.903803] systemd[1]: Stopped Plymouth switch root service. [ 10.963181] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.963289] systemd[1]: Stopped Journal Service. [ 10.965359] systemd[1]: Starting Journal Service... [ 11.132274] fuse: init (API version 7.32) [ 11.194068] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. [ 11.195426] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.196828] systemd[1]: Starting Apply Kernel Variables... [ 11.198235] systemd[1]: Starting Coldplug All udev Devices... [ 11.199686] systemd[1]: sysroot.mount: Succeeded. [ 11.200837] systemd[1]: Started Journal Service. [ 11.249995] EXT4-fs (sda1): re-mounted. Opts: (null) [ 11.405791] systemd-journald[535]: Received client request to flush runtime journal. [ 13.979226] ACPI: AC Adapter [ADP1] (on-line) [ 13.996136] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204) [ 13.996146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.996150] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20200925/utaddress-204) [ 13.996155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.996156] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20200925/utaddress-204) [ 13.996161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.996162] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20200925/utaddress-204) [ 13.996167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.996169] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.028581] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 14.028900] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads [ 14.031456] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 14.098042] e1000e: Intel(R) PRO/1000 Network Driver [ 14.098045] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 14.098445] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 14.118758] toshiba_haps: Toshiba HDD Active Protection Sensor device [ 14.124979] thermal LNXTHERM:00: registered as thermal_zone0 [ 14.124985] ACPI: Thermal Zone [TZ01] (50 C) [ 14.178905] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver [ 14.223130] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.228702] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us [ 14.240165] tpm tpm0: Operation Timed out [ 14.246819] tpm tpm0: Operation Timed out [ 14.246823] tpm tpm0: Adjusting TPM timeout parameters. [ 14.254211] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 14.254221] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 14.254304] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF [ 14.271778] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24 [ 14.276952] input: Toshiba input device as /devices/virtual/input/input7 [ 14.285459] toshiba_acpi: Registering Toshiba accelerometer iio device [ 14.392362] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.395763] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.403637] toshiba_acpi: Supported laptop features: hotkeys backlight video-out fan touchpad accelerometer-axes usb-sleep-charge wwan cooling-method [ 14.702284] usb 1-1.6: new full-speed USB device number 6 using ehci-pci [ 14.705278] Intel(R) Wireless WiFi driver for Linux [ 14.705489] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.751984] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 14.763508] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 14.767279] usb 1-1.6: device descriptor read/64, error -32 [ 14.802417] iwlwifi 0000:03:00.0: loaded firmware version XXX.XXX.XXX.XXX build 25532 6000-4.ucode op_mode iwldvm [ 15.225679] snd_hda_intel 0000:01:00.1: Disabling MSI [ 15.225688] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 15.274315] tpm tpm0: TPM is disabled/deactivated (0x7) [ 15.300092] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 15.300095] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 15.300096] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 15.300098] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 [ 15.326390] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.418534] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 15.418614] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 15.418678] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 15.418737] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 15.521362] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.521368] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.521370] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 15.521372] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.521374] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.521376] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 15.521378] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 15.528110] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.528181] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 15.617997] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 15.755100] cdc_wdm 1-1.5:1.5: cdc-wdm0: USB WDM device [ 15.755170] cdc_wdm 1-1.5:1.8: cdc-wdm1: USB WDM device [ 15.755205] usbcore: registered new interface driver cdc_wdm [ 15.755524] cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device [ 15.757136] cdc_acm 1-1.5:1.3: ttyACM1: USB ACM device [ 15.763500] cdc_acm 1-1.5:1.9: ttyACM2: USB ACM device [ 15.771352] usbcore: registered new interface driver cdc_acm [ 15.771355] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 15.824952] cdc_ether 1-1.5:1.6 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.5, Mobile Broadband Network Device, XX:XX:XX:XX:XX:XX [ 15.825017] usbcore: registered new interface driver cdc_ether [ 15.842605] mc: Linux media interface: v0.10 [ 15.922586] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508, bcdDevice=52.76 [ 15.922592] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 15.922594] usb 1-1.6: Product: EYSNJCSAX-A [ 15.922595] usb 1-1.6: Manufacturer: TAIYO YUDEN [ 15.938978] videodev: Linux video capture interface: v2.00 [ 16.056056] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130) [ 16.074125] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input15 [ 16.089508] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 16.097567] input: USB2.0 UVC WebCam: USB2.0 UVC W as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input16 [ 16.097707] usbcore: registered new interface driver uvcvideo [ 16.097709] USB Video Class driver (1.1.1) [ 16.123792] iTCO_vendor_support: vendor-support=0 [ 16.189804] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 16.189867] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460) [ 16.189957] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.257557] cdc_ether 1-1.5:1.6 wwp0s26u1u5i6: renamed from wwan0 [ 16.269597] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 16.276274] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 16.701824] Bluetooth: Core ver 2.22 [ 16.701865] NET: Registered protocol family 31 [ 16.701866] Bluetooth: HCI device and connection manager initialized [ 16.701871] Bluetooth: HCI socket layer initialized [ 16.701873] Bluetooth: L2CAP socket layer initialized [ 16.701880] Bluetooth: SCO socket layer initialized [ 16.892038] usbcore: registered new interface driver btusb [ 16.893970] Bluetooth: hci0: unexpected event for opcode 0x0000 [ 17.447603] alua: device handler registered [ 17.454802] emc: device handler registered [ 17.455529] rdac: device handler registered [ 21.572288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.572292] Bluetooth: BNEP filters: protocol multicast [ 21.572299] Bluetooth: BNEP socket layer initialized [ 25.469637] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 25.696605] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 25.792612] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 26.019609] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 26.463650] Non-volatile memory driver v1.3 [ 26.935176] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 27.015872] NET: Registered protocol family 17 [ 27.158051] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 27.158096] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 28.697761] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx [ 28.697821] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 29.603082] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=6869 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 29.791807] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=7043 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.093659] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=1 ID=63828 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.141889] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=7278 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.336950] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX DST=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX LEN=80 TC=0 HOPLIMIT=255 FLOWLBL=475106 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.507293] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX DST=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX LEN=80 TC=0 HOPLIMIT=255 FLOWLBL=475106 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.528648] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 30.757829] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 30.808567] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=1 ID=63870 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.808952] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX DST=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX LEN=80 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 30.835090] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX DST=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX LEN=80 TC=0 HOPLIMIT=255 FLOWLBL=475106 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 31.030880] PM: suspend entry (deep) [ 31.164020] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=1 ID=63880 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 31.164470] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX DST=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX LEN=80 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 31.988110] Filesystems sync: 0.957 seconds [ 31.990418] Freezing user space processes ... (elapsed 0.189 seconds) done. [ 32.179659] OOM killer disabled. [ 32.179662] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 32.180407] printk: Suspending console(s) (use no_console_suspend to debug) [ 32.187394] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 32.187472] sd 0:0:0:0: [sda] Stopping disk [ 32.201789] serial 00:06: disabled [ 32.258630] e1000e: EEE TX LPI TIMER: 00000000 [ 34.895532] ACPI: Preparing to enter system sleep state S3 [ 34.896113] PM: Saving platform NVS memory [ 34.896133] Disabling non-boot CPUs ... [ 34.896508] IRQ 32: no longer affine to CPU1 [ 34.897571] smpboot: CPU 1 is now offline [ 34.898703] IRQ 30: no longer affine to CPU2 [ 34.899727] smpboot: CPU 2 is now offline [ 34.900714] IRQ 23: no longer affine to CPU3 [ 34.901748] smpboot: CPU 3 is now offline [ 34.903159] ACPI: Low-level resume complete [ 34.903224] PM: Restoring platform NVS memory [ 34.904498] Enabling non-boot CPUs ... [ 34.904734] smpboot: Scheduler frequency invariance went wobbly, disabling! [ 34.904850] x86: Booting SMP configuration: [ 34.904851] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 34.908162] CPU1 is up [ 34.908470] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 34.912326] CPU2 is up [ 34.912597] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 34.916086] CPU3 is up [ 34.918440] ACPI: Waking up from system sleep state S3 [ 35.013202] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 35.013215] sdhci-pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via FireWire function) [ 35.013216] sdhci-pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller [ 35.014905] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 35.015986] sd 0:0:0:0: [sda] Starting disk [ 35.028466] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 35.233224] ------------[ cut here ]------------ [ 35.233225] TPM returned invalid status [ 35.233275] WARNING: CPU: 0 PID: 911 at drivers/char/tpm/tpm_tis_core.c:249 tpm_tis_status+0x86/0xa0 [tpm_tis_core] [ 35.233276] Modules linked in: sg af_packet st nvram bnep nf_log_ipv6 ip6t_REJECT nf_reject_ipv6 xt_hl ip6t_rt nf_log_ipv4 nf_log_common ipt_REJECT nf_reject_ipv4 xt_LOG xt_comment xt_limit xt_addrtype xt_tcpudp xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_ether intel_powerclamp usbnet cdc_acm cdc_wdm mii coretemp kvm_intel snd_hda_codec_realtek kvm snd_hda_codec_generic snd_hda_codec_hdmi tpm_infineon ledtrig_audio iwldvm irqbypass snd_hda_intel mac80211 snd_intel_dspcfg intel_cstate soundwire_intel soundwire_generic_allocation intel_uncore libarc4 soundwire_cadence snd_hda_codec psmouse [ 35.233317] snd_hda_core iwlwifi snd_hwdep input_leds snd_soc_core snd_compress cfg80211 snd_pcm_dmaengine snd_pcm toshiba_acpi snd_timer sparse_keymap tpm_tis toshiba_bluetooth industrialio mei_wdt tpm_tis_core snd rfkill tpm thermal toshiba_haps mac_hid soundcore e1000e intel_ips lpc_ich intel_agp tiny_power_button ac intel_gtt acpi_cpufreq sch_fq_codel fuse ext4 crc16 mbcache jbd2 sd_mod t10_pi sr_mod cdrom crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd libahci cryptd glue_helper nouveau libata evdev mxm_wmi wmi serio_raw i2c_algo_bit ttm scsi_mod sdhci_pci cqhci drm_kms_helper syscopyarea sysfillrect sdhci sysimgblt fb_sys_fops mmc_core ehci_pci drm agpgart i2c_core battery video button ehci_hcd usbcore btrfs blake2b_generic xor raid6_pq libcrc32c crc32c_generic crc32c_intel dm_mirror dm_region_hash dm_log dm_mod unix ipv6 autofs4 [ 35.233370] CPU: 0 PID: 911 Comm: systemd-sleep Not tainted 5.10.14-desktop-1omv4002 #1 [ 35.233371] Hardware name: TOSHIBA TECRA S11/Portable PC, BIOS Version 3.50 10/23/2012 [ 35.233373] RIP: 0010:tpm_tis_status+0x86/0xa0 [tpm_tis_core] [ 35.233376] Code: 00 75 30 48 83 c4 18 c3 31 c0 80 3d af 36 00 00 00 75 e0 48 c7 c7 dc 92 e5 c0 88 44 24 07 c6 05 9b 36 00 00 01 e8 4a 3f 94 e2 <0f> 0b 0f b6 44 24 07 eb c0 e8 1c be 97 e2 66 66 2e 0f 1f 84 00 00 [ 35.233377] RSP: 0018:ffffc060c13e7b28 EFLAGS: 00010282 [ 35.233378] RAX: 0000000000000000 RBX: ffff9e1d423ad000 RCX: ffff9e1d73e179c8 [ 35.233379] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9e1d73e179c0 [ 35.233380] RBP: ffff9e1d423ad000 R08: ffffffffa445eda0 R09: ffffffffa44bcd28 [ 35.233381] R10: ffffffffa445edc8 R11: 0000000000000001 R12: ffff9e1d4e71e3d8 [ 35.233381] R13: ffff9e1d4f600000 R14: 0000000000000000 R15: ffffc060c13e7bfa [ 35.233383] FS: 00007fe187b36ac0(0000) GS:ffff9e1d73e00000(0000) knlGS:0000000000000000 [ 35.233384] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.233385] CR2: 00007f64d29a6750 CR3: 000000010d6a2000 CR4: 00000000000006f0 [ 35.233386] Call Trace: [ 35.233392] tpm_tis_send_XXXX+0x3f/0x250 [tpm_tis_core] [ 35.233395] tpm_tis_send_main+0x2e/0xf0 [tpm_tis_core] [ 35.233399] ? update_load_avg+0x7e/0x630 [ 35.233403] tpm_transmit+0xd8/0x3d0 [tpm] [ 35.233408] tpm_transmit_cmd+0x25/0x90 [tpm] [ 35.233411] tpm1_do_selftest+0x88/0x130 [tpm] [ 35.233414] tpm_tis_resume+0x71/0x140 [tpm_tis_core] [ 35.233417] ? preempt_schedule_thunk+0x16/0x18 [ 35.233420] ? pnp_bus_suspend+0x10/0x10 [ 35.233421] pnp_bus_resume+0x63/0x90 [ 35.233425] dpm_run_callback+0x25/0xe0 [ 35.233427] device_resume+0x8b/0x190 [ 35.233429] dpm_resume+0xef/0x2d0 [ 35.233430] dpm_resume_end+0xd/0x20 [ 35.233434] suspend_devices_and_enter+0x1d5/0x750 [ 35.233439] pm_suspend.cold+0x244/0x291 [ 35.233441] state_store+0x42/0x90 [ 35.233444] kernfs_fop_write_iter+0x124/0x1b0 [ 35.233448] new_sync_write+0x11c/0x1b0 [ 35.233451] vfs_write+0x1d8/0x270 [ 35.233453] ksys_write+0x5f/0xe0 [ 35.233456] do_syscall_64+0x33/0x40 [ 35.233461] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 35.233463] RIP: 0033:0x7fe18884d413 [ 35.233465] Code: 8b 15 61 3a 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 55 c3 0f 1f 40 00 48 83 ec 28 48 89 54 24 18 [ 35.233466] RSP: 002b:00007ffc137e5f08 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 35.233468] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe18884d413 [ 35.233468] RDX: 0000000000000004 RSI: 00007ffc137e5fc0 RDI: 0000000000000004 [ 35.233469] RBP: 00007ffc137e5fc0 R08: 0000000000000004 R09: 0000000000000000 [ 35.233470] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004 [ 35.233471] R13: 0000560cacee13c0 R14: 0000000000000004 R15: 00007fe188922700 [ 35.233473] ---[ end trace 2757731d4916c085 ]--- [ 35.240807] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 35.241769] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 35.257380] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 35.334017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.335710] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._SDD.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 35.335719] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 35.335756] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 35.335763] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 35.337947] ata6: SATA link down (SStatus 0 SControl 300) [ 35.341392] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._SDD.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 35.341400] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 35.341418] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.GTF1], AE_NOT_FOUND (20200925/psargs-330) [ 35.341425] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 35.341437] ata2.00: configured for UDMA/100 [ 35.383785] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 35.521741] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 35.592860] usb 2-1.5.2: reset full-speed USB device number 4 using ehci-pci [ 36.959847] usb 1-1.5: reset high-speed USB device number 5 using ehci-pci [ 37.154830] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 37.155789] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._SDD.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 37.155801] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 37.155829] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 37.155832] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 37.161154] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._SDD.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 37.161160] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._SDD due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 37.161178] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.GTF0], AE_NOT_FOUND (20200925/psargs-330) [ 37.161181] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 37.161650] ata1.00: configured for UDMA/133 [ 37.232780] tpm tpm0: tpm_try_transmit: send(): error -62 [ 37.233273] serial 00:06: activated [ 37.413499] OOM killer enabled. [ 37.413502] Restarting tasks ... done. [ 37.416771] usb 1-1.6: USB disconnect, device number 6 [ 37.431022] PM: suspend exit [ 37.751777] usb 1-1.6: new full-speed USB device number 7 using ehci-pci [ 37.816765] usb 1-1.6: device descriptor read/64, error -32 [ 37.820980] usb 2-1.5.2: usbfs: process 814 (pcscd) did not claim interface 0 before use [ 38.188402] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx [ 38.640328] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 38.920185] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508, bcdDevice=52.76 [ 38.920192] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 38.920195] usb 1-1.6: Product: EYSNJCSAX-A [ 38.920197] usb 1-1.6: Manufacturer: TAIYO YUDEN [ 38.922256] Bluetooth: hci0: unexpected event for opcode 0x0000 [ 41.859314] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx [ 41.859369] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 42.520676] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=9985 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 42.811527] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=10036 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 42.958833] [UFW BLOCK] IN=enp0s25 OUT= MAC= SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=10175 PROTO=UDP SPT=5355 DPT=5355 LEN=40 [ 43.260826] [UFW BLOCK] IN=enp0s25 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XX:XX:XX:XX:XX:XX SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=60 TOS=0x00 PREC=0x00 TTL=1 ID=64080 PROTO=UDP SPT=5355 DPT=5355 LEN=40