[ 0.000000] Linux version 5.4.0-29-generic (XXX@XXX) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 (Ubuntu 5.4.0-29.33-generic 5.4.30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=HASH_BA0-5D23-A42A-D0E9-2ACD204E2D08 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000796b0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000796b1000-0x0000000079881fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079882000-0x0000000079979fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007997a000-0x0000000079e18fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079e19000-0x000000007bda4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bda5000-0x000000007bda5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bda6000-0x000000007be2bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007be2c000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x7528f018-0x752c3c57] usable ==> usable [ 0.000000] e820: update [mem 0x7528f018-0x752c3c57] usable ==> usable [ 0.000000] e820: update [mem 0x7525a018-0x7528ec57] usable ==> usable [ 0.000000] e820: update [mem 0x7525a018-0x7528ec57] usable ==> usable [ 0.000000] e820: update [mem 0x75249018-0x75259057] usable ==> usable [ 0.000000] e820: update [mem 0x75249018-0x75259057] usable ==> usable [ 0.000000] e820: update [mem 0x75240018-0x75248057] usable ==> usable [ 0.000000] e820: update [mem 0x75240018-0x75248057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000075240017] usable [ 0.000000] reserve setup_data: [mem 0x0000000075240018-0x0000000075248057] usable [ 0.000000] reserve setup_data: [mem 0x0000000075248058-0x0000000075249017] usable [ 0.000000] reserve setup_data: [mem 0x0000000075249018-0x0000000075259057] usable [ 0.000000] reserve setup_data: [mem 0x0000000075259058-0x000000007525a017] usable [ 0.000000] reserve setup_data: [mem 0x000000007525a018-0x000000007528ec57] usable [ 0.000000] reserve setup_data: [mem 0x000000007528ec58-0x000000007528f017] usable [ 0.000000] reserve setup_data: [mem 0x000000007528f018-0x00000000752c3c57] usable [ 0.000000] reserve setup_data: [mem 0x00000000752c3c58-0x00000000796b0fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000796b1000-0x0000000079881fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000079882000-0x0000000079979fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007997a000-0x0000000079e18fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000079e19000-0x000000007bda4fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007bda5000-0x000000007bda5fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007bda6000-0x000000007be2bfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007be2c000-0x000000007bffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047fffffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x799be000 ACPI 2.0=0x799be000 ESRT=0x7bae1d98 SMBIOS=0xf05b0 MPS=0xfd670 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro Super Server/X10SDV-2C-TLN2F, BIOS 2.1 11/22/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2195.231 MHz processor [ 0.001207] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001209] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001216] last_pfn = 0x480000 max_arch_pfn = 0x400000000 [ 0.001221] MTRR default type: write-back [ 0.001221] MTRR fixed ranges enabled: [ 0.001223] 00000-9FFFF write-back [ 0.001224] A0000-BFFFF uncachable [ 0.001224] C0000-FFFFF write-protect [ 0.001225] MTRR variable ranges enabled: [ 0.001227] 0 base 000080000000 mask 3FFF80000000 uncachable [ 0.001228] 1 base 380000000000 mask 3FC000000000 uncachable [ 0.001229] 2 base 0000FBA00000 mask 3FFFFFE00000 write-through [ 0.001230] 3 base 0000FBC00000 mask 3FFFFFE00000 write-through [ 0.001231] 4 base 0000FBE00000 mask 3FFFFFF00000 write-through [ 0.001231] 5 disabled [ 0.001232] 6 disabled [ 0.001232] 7 disabled [ 0.001233] 8 disabled [ 0.001233] 9 disabled [ 0.001788] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002002] x2apic: enabled by BIOS, switching to x2apic ops [ 0.002003] last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.010953] found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] [ 0.010968] esrt: Reserving ESRT space from 0x000000007bae1d98 to 0x000000007bae1dd0. [ 0.010978] check: Scanning 1 areas for low memory corruption [ 0.010983] Using GB pages for direct mapping [ 0.010985] BRK [0x1d4c01000, 0x1d4c01fff] PGTABLE [ 0.010987] BRK [0x1d4c02000, 0x1d4c02fff] PGTABLE [ 0.010988] BRK [0x1d4c03000, 0x1d4c03fff] PGTABLE [ 0.011037] BRK [0x1d4c04000, 0x1d4c04fff] PGTABLE [ 0.011147] BRK [0x1d4c05000, 0x1d4c05fff] PGTABLE [ 0.011190] BRK [0x1d4c06000, 0x1d4c06fff] PGTABLE [ 0.011258] BRK [0x1d4c07000, 0x1d4c07fff] PGTABLE [ 0.011309] BRK [0x1d4c08000, 0x1d4c08fff] PGTABLE [ 0.011351] BRK [0x1d4c09000, 0x1d4c09fff] PGTABLE [ 0.011422] secureboot: Secure boot disabled [ 0.011423] RAMDISK: [mem 0x3cfc1000-0x3fffdfff] [ 0.011431] ACPI: Early table checksum verification disabled [ 0.011435] ACPI: RSDP 0x00000000799BE000 000024 (v02 SUPERM) [ 0.011439] ACPI: XSDT 0x00000000799BE090 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.011445] ACPI: FACP 0x00000000799D68D8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.011450] ACPI: DSDT 0x00000000799BE1C0 018716 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.011453] ACPI: FACS 0x0000000079E17F80 000040 [ 0.011456] ACPI: APIC 0x00000000799D69E8 000084 (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.011459] ACPI: FPDT 0x00000000799D6A70 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.011461] ACPI: FIDT 0x00000000799D6AB8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.011464] ACPI: SPMI 0x00000000799D6B58 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.011467] ACPI: MCFG 0x00000000799D6BA0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.011470] ACPI: UEFI 0x00000000799D6BE0 000042 (v01 00000000 00000000) [ 0.011473] ACPI: DBG2 0x00000000799D6C28 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.011475] ACPI: HPET 0x00000000799D6CA0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.011478] ACPI: WDDT 0x00000000799D6CD8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.011481] ACPI: SSDT 0x00000000799D6D18 00EE27 (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.011484] ACPI: SSDT 0x00000000799E5B40 0020C5 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.011487] ACPI: SSDT 0x00000000799E7C08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.011490] ACPI: PRAD 0x00000000799E7C70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.011493] ACPI: DMAR 0x00000000799E7D78 0000BC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.011501] ACPI: Local APIC address 0xfee00000 [ 0.011503] Setting APIC routing to cluster x2apic. [ 0.011591] No NUMA configuration found [ 0.011592] Faking a node at [mem 0x0000000000000000-0x000000047fffffff] [ 0.011603] NODE_DATA(0) allocated [mem 0x47ffd5000-0x47fffffff] [ 0.011873] Zone ranges: [ 0.011873] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011875] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011876] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.011877] Device empty [ 0.011877] Movable zone start for each node [ 0.011881] Early memory node ranges [ 0.011882] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.011883] node 0: [mem 0x0000000000100000-0x00000000796b0fff] [ 0.011884] node 0: [mem 0x0000000079882000-0x0000000079979fff] [ 0.011885] node 0: [mem 0x000000007bda5000-0x000000007bda5fff] [ 0.011885] node 0: [mem 0x000000007be2c000-0x000000007bffffff] [ 0.011886] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.012190] Zeroed struct page in unavailable ranges: 26339 pages [ 0.012191] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff] [ 0.012193] On node 0 totalpages: 4167965 [ 0.012194] DMA zone: 64 pages used for memmap [ 0.012195] DMA zone: 28 pages reserved [ 0.012196] DMA zone: 3999 pages, LIFO batch:0 [ 0.012255] DMA32 zone: 7718 pages used for memmap [ 0.012256] DMA32 zone: 493950 pages, LIFO batch:63 [ 0.021767] Normal zone: 57344 pages used for memmap [ 0.021769] Normal zone: 3670016 pages, LIFO batch:63 [ 0.068467] ACPI: PM-Timer IO Port: 0x408 [ 0.068470] ACPI: Local APIC address 0xfee00000 [ 0.068477] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.068478] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.068478] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.068479] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.068491] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.068493] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.068494] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.068495] ACPI: IRQ0 used by override. [ 0.068496] ACPI: IRQ9 used by override. [ 0.068498] Using ACPI (MADT) for SMP configuration information [ 0.068500] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.068504] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.068519] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.068521] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.068522] PM: Registered nosave memory: [mem 0x75240000-0x75240fff] [ 0.068524] PM: Registered nosave memory: [mem 0x75248000-0x75248fff] [ 0.068524] PM: Registered nosave memory: [mem 0x75249000-0x75249fff] [ 0.068526] PM: Registered nosave memory: [mem 0x75259000-0x75259fff] [ 0.068526] PM: Registered nosave memory: [mem 0x7525a000-0x7525afff] [ 0.068528] PM: Registered nosave memory: [mem 0x7528e000-0x7528efff] [ 0.068528] PM: Registered nosave memory: [mem 0x7528f000-0x7528ffff] [ 0.068530] PM: Registered nosave memory: [mem 0x752c3000-0x752c3fff] [ 0.068531] PM: Registered nosave memory: [mem 0x796b1000-0x79881fff] [ 0.068533] PM: Registered nosave memory: [mem 0x7997a000-0x79e18fff] [ 0.068533] PM: Registered nosave memory: [mem 0x79e19000-0x7bda4fff] [ 0.068535] PM: Registered nosave memory: [mem 0x7bda6000-0x7be2bfff] [ 0.068536] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff] [ 0.068537] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.068538] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.068538] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.068539] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.068539] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.068541] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.068543] Booting paravirtualized kernel on bare hardware [ 0.068546] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.068552] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.068797] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.068805] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.068806] pcpu-alloc: [0] 0 1 2 3 [ 0.068835] Built 1 zonelists, mobility grouping on. Total pages: 4102811 [ 0.068836] Policy zone: Normal [ 0.068837] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=HASH_BA0-5D23-A42A-D0E9-2ACD204E2D08 ro quiet splash [ 0.070359] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.071081] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.071134] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.076901] Calgary: detecting Calgary via BIOS EBDA area [ 0.076902] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.134427] Memory: 16167004K/16671860K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 504856K reserved, 0K cma-reserved) [ 0.134575] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.134588] Kernel/User page tables isolation: enabled [ 0.134603] ftrace: allocating 44478 entries in 174 pages [ 0.153414] rcu: Hierarchical RCU implementation. [ 0.153416] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.153417] Tasks RCU enabled. [ 0.153418] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.153419] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.156603] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.156834] random: crng done (trusting CPU's manufacturer) [ 0.156859] Console: colour dummy device 80x25 [ 0.156865] printk: console [tty0] enabled [ 0.156881] ACPI: Core revision 20190816 [ 0.157072] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.157082] APIC: Switch to symmetric I/O mode setup [ 0.157084] DMAR: Host address width 46 [ 0.157085] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.157091] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de [ 0.157092] DMAR: RMRR base: 0x0000007baf5000 end: 0x0000007bb03fff [ 0.157093] DMAR: ATSR flags: 0x0 [ 0.157094] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.157096] DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0 [ 0.157097] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.157098] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.157398] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.157796] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.177083] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa499c0dbc, max_idle_ns: 440795218473 ns [ 0.177087] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.46 BogoMIPS (lpj=8780924) [ 0.177090] pid_max: default: 32768 minimum: 301 [ 0.179524] LSM: Security Framework initializing [ 0.179536] Yama: becoming mindful. [ 0.179569] AppArmor: AppArmor initialized [ 0.179643] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.179684] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.179700] *** VALIDATE tmpfs *** [ 0.179853] *** VALIDATE proc *** [ 0.179910] *** VALIDATE cgroup1 *** [ 0.179911] *** VALIDATE cgroup2 *** [ 0.179982] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.180029] process: using mwait in idle threads [ 0.180032] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.180033] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.180036] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.180037] Spectre V2 : Mitigation: Full generic retpoline [ 0.180038] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.180038] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.180039] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.180040] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.180041] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.180044] TAA: Mitigation: Clear CPU buffers [ 0.180045] MDS: Mitigation: Clear CPU buffers [ 0.180315] Freeing SMP alternatives memory: 40K [ 0.185111] TSC deadline timer enabled [ 0.185113] smpboot: CPU0: Intel(R) Pentium(R) CPU D1508 @ 2.20GHz (family: 0x6, model: 0x56, stepping: 0x3) [ 0.185230] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.185237] ... version: 3 [ 0.185237] ... bit width: 48 [ 0.185238] ... generic registers: 4 [ 0.185238] ... value mask: 0000ffffffffffff [ 0.185239] ... max period: 00007fffffffffff [ 0.185239] ... fixed-purpose events: 3 [ 0.185240] ... event mask: 000000070000000f [ 0.185276] rcu: Hierarchical SRCU implementation. [ 0.186220] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.186282] smp: Bringing up secondary CPUs ... [ 0.186380] x86: Booting SMP configuration: [ 0.186381] .... node #0, CPUs: #1 #2 [ 0.187436] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.187436] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.187436] #3 [ 0.190043] smp: Brought up 1 node, 4 CPUs [ 0.190043] smpboot: Max logical packages: 1 [ 0.190043] smpboot: Total of 4 processors activated (17561.84 BogoMIPS) [ 0.190546] devtmpfs: initialized [ 0.190546] x86/mm: Memory block size: 128MB [ 0.193935] PM: Registering ACPI NVS region [mem 0x7997a000-0x79e18fff] (4845568 bytes) [ 0.193935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.193935] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.193935] pinctrl core: initialized pinctrl subsystem [ 0.193935] PM: RTC time: 23:48:01, date: 2020-05-23 [ 0.193935] NET: Registered protocol family 16 [ 0.193935] EISA bus registered [ 0.193935] cpuidle: using governor ladder [ 0.193935] cpuidle: using governor menu [ 0.193935] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.193935] ACPI: bus type PCI registered [ 0.193935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.193935] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.193935] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.193935] PCI: Using configuration type 1 for base access [ 0.194065] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.197410] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.197410] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.197410] ACPI: Added _OSI(Module Device) [ 0.197410] ACPI: Added _OSI(Processor Device) [ 0.197410] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.197410] ACPI: Added _OSI(Processor Aggregator Device) [ 0.197410] ACPI: Added _OSI(Linux-Dell-Video) [ 0.197410] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.197410] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.242114] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.253269] ACPI: Dynamic OEM Table Load: [ 0.295963] ACPI: Interpreter enabled [ 0.295980] ACPI: (supports S0 S4 S5) [ 0.295982] ACPI: Using IOAPIC for interrupt routing [ 0.296014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.296749] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.330702] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.330707] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.331209] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR] [ 0.331683] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.331684] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.331729] PCI host bridge to bus 0000:ff [ 0.331731] pci_bus 0000:ff: root bus resource [bus ff] [ 0.331744] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.331800] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.331844] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.331887] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.331930] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.331971] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.332014] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.332057] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.332101] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.332142] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.332183] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.332224] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.332266] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.332305] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.332345] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.332387] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.332419] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.332467] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.332513] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.332559] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.332605] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.332655] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.332700] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.332746] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.332793] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.332836] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.332881] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.332927] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.332974] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.333019] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.333061] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.333106] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.333154] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.333197] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.333243] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.333289] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.333335] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.333389] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.333431] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.333473] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.333519] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.333549] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.333593] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.333635] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.339220] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.339224] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.339677] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 0.340249] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 0.340250] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.340631] PCI host bridge to bus 0000:00 [ 0.340633] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.340634] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.340636] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.340637] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.340638] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.340647] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.340824] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.340882] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.341027] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.341078] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.341220] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.341270] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.341411] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.341467] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.341601] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.341735] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.341895] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.342039] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.342058] pci 0000:00:14.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit] [ 0.342113] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.342233] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.342252] pci 0000:00:16.0: reg 0x10: [mem 0xfb417000-0xfb41700f 64bit] [ 0.342308] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.342428] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.342446] pci 0000:00:16.1: reg 0x10: [mem 0xfb416000-0xfb41600f 64bit] [ 0.342502] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.342630] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.342649] pci 0000:00:1a.0: reg 0x10: [mem 0xfb414000-0xfb4143ff] [ 0.342725] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.342857] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.343007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.343138] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.343212] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.343351] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.343371] pci 0000:00:1d.0: reg 0x10: [mem 0xfb413000-0xfb4133ff] [ 0.343448] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.343575] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.343787] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.343803] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.343809] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.343815] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.343821] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.343827] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.343833] pci 0000:00:1f.2: reg 0x24: [mem 0xfb412000-0xfb4127ff] [ 0.343869] pci 0000:00:1f.2: PME# supported from D3hot [ 0.343985] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.344000] pci 0000:00:1f.3: reg 0x10: [mem 0xfb411000-0xfb4110ff 64bit] [ 0.344013] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.344140] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.344158] pci 0000:00:1f.6: reg 0x10: [mem 0xfb410000-0xfb410fff 64bit] [ 0.344537] acpiphp: Slot [1] registered [ 0.344564] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.344783] pci 0000:02:00.0: [8086:6f50] type 00 class 0x088000 [ 0.344795] pci 0000:02:00.0: reg 0x10: [mem 0xfb306000-0xfb307fff 64bit] [ 0.344916] pci 0000:02:00.1: [8086:6f51] type 00 class 0x088000 [ 0.344928] pci 0000:02:00.1: reg 0x10: [mem 0xfb304000-0xfb305fff 64bit] [ 0.345033] pci 0000:02:00.2: [8086:6f52] type 00 class 0x088000 [ 0.345044] pci 0000:02:00.2: reg 0x10: [mem 0xfb302000-0xfb303fff 64bit] [ 0.345153] pci 0000:02:00.3: [8086:6f53] type 00 class 0x088000 [ 0.345164] pci 0000:02:00.3: reg 0x10: [mem 0xfb300000-0xfb301fff 64bit] [ 0.345274] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.345277] pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.345514] pci 0000:03:00.0: [8086:15ad] type 00 class 0x020000 [ 0.345528] pci 0000:03:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.345543] pci 0000:03:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.345547] pci 0000:03:00.0: reg 0x30: [mem 0xfb280000-0xfb2fffff pref] [ 0.345588] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.345603] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.345604] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.345612] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.345613] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.345749] pci 0000:03:00.1: [8086:15ad] type 00 class 0x020000 [ 0.345762] pci 0000:03:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.345776] pci 0000:03:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.345781] pci 0000:03:00.1: reg 0x30: [mem 0xfb200000-0xfb27ffff pref] [ 0.345819] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 0.345832] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.345833] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.345840] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.345842] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.345973] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.345976] pci 0000:00:02.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.345979] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.346209] pci 0000:04:00.0: [1b4b:9485] type 00 class 0x010400 [ 0.346224] pci 0000:04:00.0: reg 0x10: [mem 0xfb140000-0xfb15ffff 64bit] [ 0.346232] pci 0000:04:00.0: reg 0x18: [mem 0xfb100000-0xfb13ffff 64bit] [ 0.346247] pci 0000:04:00.0: reg 0x30: [mem 0xfb160000-0xfb16ffff pref] [ 0.346286] pci 0000:04:00.0: supports D1 [ 0.346287] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.346370] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.346373] pci 0000:00:03.0: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.346446] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.346511] pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400 [ 0.346586] pci 0000:06:00.0: enabling Extended Tags [ 0.346663] pci 0000:06:00.0: supports D1 D2 [ 0.346664] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.346772] pci 0000:00:1c.4: PCI bridge to [bus 06-07] [ 0.346775] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.346777] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.346826] pci_bus 0000:07: extended config space not accessible [ 0.346860] pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000 [ 0.346884] pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.346897] pci 0000:07:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.346910] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe07f] [ 0.346969] pci 0000:07:00.0: BAR 0: assigned to efifb [ 0.347015] pci 0000:07:00.0: supports D1 D2 [ 0.347016] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.347132] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.347139] pci 0000:06:00.0: bridge window [io 0xe000-0xefff] [ 0.347143] pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.347182] pci_bus 0000:00: on NUMA node 0 [ 0.348458] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 0.348527] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12) [ 0.348593] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12) [ 0.348660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12) [ 0.348726] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.348792] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.348858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.348924] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.349137] iommu: Default domain type: Translated [ 0.349271] SCSI subsystem initialized [ 0.353096] libata version 3.00 loaded. [ 0.353111] pci 0000:07:00.0: vgaarb: setting as boot VGA device [ 0.353113] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.353114] pci 0000:07:00.0: vgaarb: bridge control possible [ 0.353115] vgaarb: loaded [ 0.353131] ACPI: bus type USB registered [ 0.353144] usbcore: registered new interface driver usbfs [ 0.353151] usbcore: registered new interface driver hub [ 0.353168] usbcore: registered new device driver usb [ 0.353195] pps_core: LinuxPPS API ver. 1 registered [ 0.353195] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.353197] PTP clock support registered [ 0.353217] EDAC MC: Ver: 3.0.0 [ 0.353239] Registered efivars operations [ 0.353239] PCI: Using ACPI for IRQ routing [ 0.359164] PCI: pci_cache_line_size set to 64 bytes [ 0.359252] e820: reserve RAM buffer [mem 0x75240018-0x77ffffff] [ 0.359253] e820: reserve RAM buffer [mem 0x75249018-0x77ffffff] [ 0.359254] e820: reserve RAM buffer [mem 0x7525a018-0x77ffffff] [ 0.359255] e820: reserve RAM buffer [mem 0x7528f018-0x77ffffff] [ 0.359256] e820: reserve RAM buffer [mem 0x796b1000-0x7bffffff] [ 0.359257] e820: reserve RAM buffer [mem 0x7997a000-0x7bffffff] [ 0.359258] e820: reserve RAM buffer [mem 0x7bda6000-0x7bffffff] [ 0.359355] NetLabel: Initializing [ 0.359356] NetLabel: domain hash size = 128 [ 0.359356] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.359371] NetLabel: unlabeled traffic allowed by default [ 0.359386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.359386] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.362164] clocksource: Switched to clocksource tsc-early [ 0.374467] *** VALIDATE bpf *** [ 0.374553] VFS: Disk quotas dquot_6.6.0 [ 0.374569] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.374597] *** VALIDATE ramfs *** [ 0.374601] *** VALIDATE hugetlbfs *** [ 0.374690] AppArmor: AppArmor Filesystem Enabled [ 0.374717] pnp: PnP ACPI init [ 0.375282] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.375431] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.375433] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.375434] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.375435] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.375437] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.375438] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.375440] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.375441] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.375443] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.375444] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.375445] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.375447] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.375448] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.375452] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375747] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.375748] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.375749] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.375750] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.375752] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.375755] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.376030] pnp 00:03: [dma 0 disabled] [ 0.376074] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.376334] pnp 00:04: [dma 0 disabled] [ 0.376374] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.376996] pnp: PnP ACPI: found 5 devices [ 0.378310] thermal_sys: Registered thermal governor 'fair_share' [ 0.378311] thermal_sys: Registered thermal governor 'bang_bang' [ 0.378311] thermal_sys: Registered thermal governor 'step_wise' [ 0.378312] thermal_sys: Registered thermal governor 'user_space' [ 0.378313] thermal_sys: Registered thermal governor 'power_allocator' [ 0.382800] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.382846] pci_bus 0000:00: max bus depth: 2 pci_try_num: 3 [ 0.382856] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff] [ 0.382860] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] [ 0.382862] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.382864] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.382871] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.382874] pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.382880] pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.382881] pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.382883] pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.382884] pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.382885] pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.382886] pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.382887] pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.382888] pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.382890] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.382892] pci 0000:00:02.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.382894] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.382898] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.382900] pci 0000:00:03.0: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.382904] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.382907] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.382910] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] [ 0.382913] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 0.382918] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.382921] pci 0000:06:00.0: bridge window [io 0xe000-0xefff] [ 0.382926] pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.382937] pci 0000:00:1c.4: PCI bridge to [bus 06-07] [ 0.382939] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.382942] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.382948] pci_bus 0000:00: No. 2 try to assign unassigned res [ 0.382949] release child resource [mem 0xfb200000-0xfb27ffff pref] [ 0.382950] release child resource [mem 0xfb280000-0xfb2fffff pref] [ 0.382951] pci 0000:00:02.2: resource 14 [mem 0xfb200000-0xfb2fffff] released [ 0.382952] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.382959] pci 0000:00:02.2: BAR 14: assigned [mem 0x90400000-0x908fffff] [ 0.382960] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.382966] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.382968] pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.382974] pci 0000:03:00.0: BAR 6: assigned [mem 0x90400000-0x9047ffff pref] [ 0.382975] pci 0000:03:00.1: BAR 6: assigned [mem 0x90480000-0x904fffff pref] [ 0.382977] pci 0000:03:00.0: BAR 7: assigned [mem 0x90500000-0x905fffff 64bit] [ 0.382980] pci 0000:03:00.0: BAR 10: assigned [mem 0x90600000-0x906fffff 64bit] [ 0.382982] pci 0000:03:00.1: BAR 7: assigned [mem 0x90700000-0x907fffff 64bit] [ 0.382985] pci 0000:03:00.1: BAR 10: assigned [mem 0x90800000-0x908fffff 64bit] [ 0.382987] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.382989] pci 0000:00:02.2: bridge window [mem 0x90400000-0x908fffff] [ 0.382991] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.382995] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.382997] pci 0000:00:03.0: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.383001] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.383003] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.383007] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] [ 0.383009] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 0.383014] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.383017] pci 0000:06:00.0: bridge window [io 0xe000-0xefff] [ 0.383022] pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.383032] pci 0000:00:1c.4: PCI bridge to [bus 06-07] [ 0.383034] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.383037] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.383044] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.383045] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.383046] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.383047] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.383049] pci_bus 0000:02: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.383050] pci_bus 0000:03: resource 1 [mem 0x90400000-0x908fffff] [ 0.383051] pci_bus 0000:03: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.383052] pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.383053] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.383054] pci_bus 0000:05: resource 1 [mem 0x90000000-0x901fffff] [ 0.383055] pci_bus 0000:05: resource 2 [mem 0x90200000-0x903fffff 64bit pref] [ 0.383057] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.383058] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.383059] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.383060] pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.383252] NET: Registered protocol family 2 [ 0.383419] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.383538] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.383769] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.383853] TCP: Hash tables configured (established 131072 bind 65536) [ 0.383913] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.383967] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.384045] NET: Registered protocol family 1 [ 0.384050] NET: Registered protocol family 44 [ 0.417292] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 23757 usecs [ 0.441229] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23361 usecs [ 0.441252] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.441267] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.441318] Trying to unpack rootfs image as initramfs... [ 0.575930] Initramfs unpacking failed: Decoding failed [ 0.575944] fbcon: Taking over console [ 0.582898] Freeing initrd memory: 49396K [ 0.601208] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.601213] software IO TLB: mapped [mem 0x71240000-0x75240000] (64MB) [ 0.601616] check: Scanning for low memory corruption every 60 seconds [ 0.603939] Initialise system trusted keyrings [ 0.603947] Key type blacklist registered [ 0.604020] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.605443] zbud: loaded [ 0.605839] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.606032] fuse: init (API version 7.31) [ 0.606049] *** VALIDATE fuse *** [ 0.606050] *** VALIDATE fuse *** [ 0.606145] Platform Keyring initialized [ 0.612382] Key type asymmetric registered [ 0.612384] Asymmetric key parser 'x509' registered [ 0.612399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.612445] io scheduler mq-deadline registered [ 0.613518] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.613821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.613899] efifb: probing for efifb [ 0.613914] efifb: No BGRT, not showing boot graphics [ 0.613915] efifb: framebuffer at 0xfa000000, using 1876k, total 1875k [ 0.613916] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.613916] efifb: scrolling: redraw [ 0.613918] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.614009] Console: switching to colour frame buffer device 100x37 [ 0.624192] fb0: EFI VGA frame buffer device [ 0.624210] intel_idle: MWAIT substates: 0x2120 [ 0.624211] intel_idle: v0.4.1 model 0x56 [ 0.624385] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.624628] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.624650] ACPI: Power Button [PWRB] [ 0.625564] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.646074] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.666648] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.668100] Linux agpgart interface v0.103 [ 0.670120] loop: module loaded [ 0.670354] libphy: Fixed MDIO Bus: probed [ 0.670355] tun: Universal TUN/TAP device driver, 1.6 [ 0.670378] PPP generic driver version 2.4.2 [ 0.670421] VFIO - User Level meta-driver version: 0.3 [ 0.670510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.670513] ehci-pci: EHCI PCI platform driver [ 0.670711] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.670717] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.670732] ehci-pci 0000:00:1a.0: debug port 2 [ 0.674650] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.674665] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb414000 [ 0.689212] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.689309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.689313] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.689316] usb usb1: Product: EHCI Host Controller [ 0.689318] usb usb1: Manufacturer: Linux 5.4.0-29-generic ehci_hcd [ 0.689321] usb usb1: SerialNumber: ... [ 0.689472] hub 1-0:1.0: USB hub found [ 0.689477] hub 1-0:1.0: 2 ports detected [ 0.689721] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.689727] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.689736] ehci-pci 0000:00:1d.0: debug port 2 [ 0.693630] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.693635] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb413000 [ 0.709170] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.709263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.709267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.709270] usb usb2: Product: EHCI Host Controller [ 0.709273] usb usb2: Manufacturer: Linux 5.4.0-29-generic ehci_hcd [ 0.709276] usb usb2: SerialNumber: ... [ 0.709499] hub 2-0:1.0: USB hub found [ 0.709503] hub 2-0:1.0: 2 ports detected [ 0.709610] ehci-platform: EHCI generic platform driver [ 0.709622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.709624] ohci-pci: OHCI PCI platform driver [ 0.709641] ohci-platform: OHCI generic platform driver [ 0.709651] uhci_hcd: USB Universal Host Controller Interface driver [ 0.709812] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.709816] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.710870] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.710873] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.711023] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.711024] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.711026] usb usb3: Product: xHCI Host Controller [ 0.711027] usb usb3: Manufacturer: Linux 5.4.0-29-generic xhci-hcd [ 0.711027] usb usb3: SerialNumber: ... [ 0.711143] hub 3-0:1.0: USB hub found [ 0.711155] hub 3-0:1.0: 8 ports detected [ 0.711828] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.711831] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.711834] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.711867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.711868] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.711869] usb usb4: Product: xHCI Host Controller [ 0.711870] usb usb4: Manufacturer: Linux 5.4.0-29-generic xhci-hcd [ 0.711871] usb usb4: SerialNumber: ... [ 0.711994] hub 4-0:1.0: USB hub found [ 0.712005] hub 4-0:1.0: 6 ports detected [ 0.712691] i8042: PNP: No PS/2 controller found. [ 0.712752] mousedev: PS/2 mouse device common for all mice [ 0.712833] rtc_cmos 00:00: RTC can wake from S4 [ 0.713009] rtc_cmos 00:00: registered as rtc0 [ 0.713025] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.713031] i2c /dev entries driver [ 0.713076] device-mapper: uevent: version 1.0.3 [ 0.713140] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.713161] platform eisa.0: Probing EISA bus 0 [ 0.713162] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.713164] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.713165] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.713166] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.713166] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.713167] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.713168] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.713169] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.713170] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.713171] platform eisa.0: EISA: Detected 0 cards [ 0.713179] intel_pstate: Intel P-state driver initializing [ 0.713664] ledtrig-cpu: registered to indicate activity on CPUs [ 0.713668] EFI Variables Facility v0.08 2004-May-17 [ 0.716106] drop_monitor: Initializing network drop monitor service [ 0.716277] NET: Registered protocol family 10 [ 0.724755] Segment Routing with IPv6 [ 0.724779] NET: Registered protocol family 17 [ 0.724815] Key type dns_resolver registered [ 0.725100] RAS: Correctable Errors collector initialized. [ 0.725129] microcode: sig=0x50663, pf=0x10, revision=0x7000019 [ 0.725168] microcode: Microcode Update Driver: v2.2. [ 0.725229] *** VALIDATE rdt *** [ 0.725234] resctrl: L3 allocation detected [ 0.725235] resctrl: L3DATA allocation detected [ 0.725235] resctrl: L3CODE allocation detected [ 0.725235] resctrl: L3 monitoring detected [ 0.725238] IPI shorthand broadcast: enabled [ 0.725244] sched_clock: Marking stable (724925910, 297863)->(1793299440, -1068075667) [ 0.725308] registered taskstats version 1 [ 0.725322] Loading compiled-in X.509 certificates [ 0.727442] Loaded X.509 cert 'Build time autogenerated kernel key: f14f50a5d0e5ac84fc1bff83a20d953027416106' [ 0.727476] zswap: loaded using pool lzo/zbud [ 0.727575] Key type ._fscrypt registered [ 0.727575] Key type .fscrypt registered [ 0.735743] Key type big_key registered [ 0.739650] Key type encrypted registered [ 0.739653] AppArmor: AppArmor sha1 policy hashing enabled [ 0.740211] ima: No TPM chip found, activating TPM-bypass! [ 0.740214] ima: Allocated hash algorithm: sha1 [ 0.740221] ima: No architecture policies found [ 0.740230] evm: Initialising EVM extended attributes: [ 0.740230] evm: security.selinux [ 0.740231] evm: security.SMACK64 [ 0.740231] evm: security.SMACK64EXEC [ 0.740231] evm: security.SMACK64TRANSMUTE [ 0.740232] evm: security.SMACK64MMAP [ 0.740232] evm: security.apparmor [ 0.740233] evm: security.ima [ 0.740233] evm: security.capability [ 0.740234] evm: HMAC attrs: 0x1 [ 0.740676] PM: Magic number: 4:950:858 [ 0.740833] rtc_cmos 00:00: setting system clock to 2020-05-23T23:48:03 UTC (1590277683) [ 0.741996] Freeing unused decrypted memory: 2040K [ 0.742512] Freeing unused kernel image memory: 2712K [ 0.793170] Write protecting the kernel read-only data: 22528k [ 0.793956] Freeing unused kernel image memory: 2008K [ 0.794208] Freeing unused kernel image memory: 1196K [ 0.803635] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.803636] x86/mm: Checking user space page tables [ 0.812883] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.812885] Run /init as init process [ 0.965435] dca service started, version 1.12.1 [ 0.972429] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20190816/utaddress-204) [ 0.972437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.972441] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20190816/utaddress-204) [ 0.972446] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.972480] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.986909] mvsas 0000:04:00.0: mvsas: driver version 0.8.16 [ 0.987259] mvsas 0000:04:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps [ 0.988474] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 0.988475] ixgbe: Copyright (c) E1DE-A7C8 Intel Corporation. [ 1.025101] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.026843] gpio_ich gpio_ich.2.auto: GPIO from 436 to 511 [ 1.045128] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.045142] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 1.053631] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.053633] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.053787] hub 1-1:1.0: USB hub found [ 1.053879] hub 1-1:1.0: 4 ports detected [ 1.073633] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.073635] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.073783] hub 2-1:1.0: USB hub found [ 1.073882] hub 2-1:1.0: 4 ports detected [ 1.146121] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) [ 1.146272] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.147026] ahci 0000:00:1f.2: version 3.0 [ 1.147230] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.147232] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.147315] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-94) [ 1.147442] pmd_set_huge: Cannot satisfy [mem 0xfbc00000-0xfbe00000] with a huge-page mapping due to MTRR override. [ 1.196447] usb 3-1: New USB device found, idVendor=045e, idProduct=0797, bcdDevice= 2.00 [ 1.196452] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.196456] usb 3-1: Product: USB Optical Mouse [ 1.205952] scsi host1: ahci [ 1.206088] scsi host2: ahci [ 1.206222] scsi host3: ahci [ 1.206307] scsi host4: ahci [ 1.206390] scsi host5: ahci [ 1.206467] scsi host6: ahci [ 1.206506] ata1: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412100 irq 32 [ 1.206508] ata2: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412180 irq 32 [ 1.206509] ata3: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412200 irq 32 [ 1.206510] ata4: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412280 irq 32 [ 1.206512] ata5: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412300 irq 32 [ 1.206513] ata6: SATA max UDMA/133 abar m2048@0xfb412000 port 0xfb412380 irq 32 [ 1.357138] usb 3-2: new low-speed USB device number 3 using xhci_hcd [ 1.484746] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484762] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484775] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484789] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484801] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484812] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.485743] ata1.00: ATA-9: CT250BX100SSD1, MU02, max UDMA/133 [ 1.485748] ata1.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 32), AA [ 1.486186] ata1.00: configured for UDMA/133 [ 1.486213] ata4.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 1.486215] ata4.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.486229] ata3.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 1.486231] ata3.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.486241] ata5.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 1.486242] ata5.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.486250] ata2.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 1.486250] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.486254] ata6.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 1.486256] ata6.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.486308] scsi 1:0:0:0: Direct-Access ATA CT250BX100SSD1 MU02 PQ: 0 ANSI: 5 [ 1.486510] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.486542] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.486554] sd 1:0:0:0: [sda] Write Protect is off [ 1.486556] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.486571] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.487482] ata2.00: configured for UDMA/133 [ 1.487499] ata5.00: configured for UDMA/133 [ 1.487547] ata4.00: configured for UDMA/133 [ 1.487595] scsi 2:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 1.487764] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.487804] sd 2:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.487806] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.487817] sd 2:0:0:0: [sdb] Write Protect is off [ 1.487820] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.487839] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.487864] ata6.00: configured for UDMA/133 [ 1.487967] ata3.00: configured for UDMA/133 [ 1.488068] scsi 3:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 1.488340] sd 3:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.488343] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.488357] sd 3:0:0:0: [sdc] Write Protect is off [ 1.488359] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.488362] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.488392] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.488484] scsi 4:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 1.488659] scsi 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.488820] scsi 5:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 1.488846] sd 4:0:0:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.488849] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 1.488859] sd 4:0:0:0: [sdd] Write Protect is off [ 1.488861] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.488877] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.488973] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.489011] sd 5:0:0:0: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.489013] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 1.489023] sd 5:0:0:0: [sde] Write Protect is off [ 1.489024] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.489039] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.489071] scsi 6:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 1.489216] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 1.489282] sd 6:0:0:0: [sdf] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.489285] sd 6:0:0:0: [sdf] 4096-byte physical blocks [ 1.489299] sd 6:0:0:0: [sdf] Write Protect is off [ 1.489300] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.489320] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.502810] sda: sda1 sda2 sda3 [ 1.503280] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.518777] usb 3-2: New USB device found, idVendor=1a2c, idProduct=0023, bcdDevice= 1.10 [ 1.518780] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.518782] usb 3-2: Product: USB Keykoard [ 1.518784] usb 3-2: Manufacturer: USB [ 1.540390] sde: sde1 sde9 [ 1.540737] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.546388] sdb: sdb1 sdb9 [ 1.546854] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.550387] sdc: sdc1 sdc9 [ 1.550808] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.556518] sdd: sdd1 sdd9 [ 1.556949] sd 4:0:0:0: [sdd] Attached SCSI disk [ 1.568050] sdf: sdf1 sdf9 [ 1.568380] sd 6:0:0:0: [sdf] Attached SCSI disk [ 1.597141] tsc: Refined TSC clocksource calibration: 2195.098 MHz [ 1.597156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa41c1cc38, max_idle_ns: 440795210299 ns [ 1.597189] clocksource: Switched to clocksource tsc [ 1.645130] usb 3-3: new high-speed USB device number 4 using xhci_hcd [ 1.666485] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.666488] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.666491] usb 3-3: Product: USB2.0 Hub [ 1.667052] hub 3-3:1.0: USB hub found [ 1.667365] hub 3-3:1.0: 4 ports detected [ 1.797120] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 1.817474] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.817476] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.817790] hub 3-4:1.0: USB hub found [ 1.817866] hub 3-4:1.0: 4 ports detected [ 1.823542] hidraw: raw HID events driver (C) Jiri Kosina [ 1.831008] usbcore: registered new interface driver usbhid [ 1.831010] usbhid: USB HID core driver [ 1.833452] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:0797.0001/input/input1 [ 1.833660] hid-generic 0003:045E:0797.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 1.833850] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1A2C:0023.0002/input/input2 [ 1.893504] hid-generic 0003:1A2C:0023.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-2/input0 [ 1.893695] input: USB USB Keykoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1A2C:0023.0003/input/input3 [ 1.953307] input: USB USB Keykoard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1A2C:0023.0003/input/input4 [ 1.953437] hid-generic 0003:1A2C:0023.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-2/input1 [ 2.125171] usb 3-4.1: new low-speed USB device number 6 using xhci_hcd [ 2.249645] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.249647] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.255125] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0004/input/input5 [ 2.313395] hid-generic 0003:0557:2419.0004: input,hidraw3: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.314250] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0005/input/input6 [ 2.314368] hid-generic 0003:0557:2419.0005: input,hidraw4: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.667305] ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 2.793424] ixgbe 0000:03:00.0: MAC: 5, PHY: 7, PBA No: 023A00-000 [ 2.793428] ixgbe 0000:03:00.0: XX:XX:XX:XX:XX:XX [ 2.847208] ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection [ 2.847281] libphy: ixgbe-mdio: probed [ 2.847539] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-94) [ 4.815421] ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 4.941481] ixgbe 0000:03:00.1: MAC: 5, PHY: 7, PBA No: 023A00-000 [ 4.941485] ixgbe 0000:03:00.1: XX:XX:XX:XX:XX:XX [ 4.995213] ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection [ 4.995287] libphy: ixgbe-mdio: probed [ 4.996848] ixgbe 0000:03:00.0 eno3: renamed from eth0 [ 5.017382] ixgbe 0000:03:00.1 eno4: renamed from eth1 [ 8.104231] scsi host0: mvsas [ 8.105122] sas: phy-0:0 added to port-0:0, phy_mask:0x1 ( 0) [ 8.105197] sas: DOING DISCOVERY on port 0, pid:190 [ 8.105206] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 8.105211] sas: ata7: end_device-0:0: dev error handler [ 8.165117] raid6: avx2x4 gen() 23771 MB/s [ 8.213117] raid6: avx2x4 xor() 15366 MB/s [ 8.261117] raid6: avx2x2 gen() 20321 MB/s [ 8.266482] ata7.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 8.266484] ata7.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 8.309115] raid6: avx2x2 xor() 12269 MB/s [ 8.357118] raid6: avx2x1 gen() 17602 MB/s [ 8.405117] raid6: avx2x1 xor() 11670 MB/s [ 8.453116] raid6: sse2x4 gen() 12643 MB/s [ 8.488856] ata7.00: configured for UDMA/133 [ 8.488871] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 8.499234] scsi 0:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 8.499266] sas: DONE DISCOVERY on port 0, pid:190, result:0 [ 8.499320] sas: phy-0:1 added to port-0:1, phy_mask:0x2 ( 100000000000000) [ 8.499459] sas: DOING DISCOVERY on port 1, pid:190 [ 8.499468] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 8.499551] sas: ata7: end_device-0:0: dev error handler [ 8.499552] sas: ata8: end_device-0:1: dev error handler [ 8.501117] raid6: sse2x4 xor() 7831 MB/s [ 8.549122] raid6: sse2x2 gen() 10609 MB/s [ 8.597118] raid6: sse2x2 xor() 6739 MB/s [ 8.645120] raid6: sse2x1 gen() 8983 MB/s [ 8.658411] ata8.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 8.658413] ata8.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 8.693117] raid6: sse2x1 xor() 6108 MB/s [ 8.693117] raid6: using algorithm avx2x4 gen() 23771 MB/s [ 8.693118] raid6: .... xor() 15366 MB/s, rmw enabled [ 8.693119] raid6: using avx2x2 recovery algorithm [ 8.695853] xor: automatically using best checksumming function avx [ 8.713040] Btrfs loaded, crc32c=crc32c-intel [ 8.810917] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 8.880643] ata8.00: configured for UDMA/133 [ 8.880701] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 8.891338] scsi 0:0:1:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 8.891373] sas: DONE DISCOVERY on port 1, pid:190, result:0 [ 8.891412] sas: phy-0:4 added to port-0:2, phy_mask:0x1 ( 400000000000000) [ 8.891498] sas: DOING DISCOVERY on port 2, pid:190 [ 8.891505] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 8.891513] sas: ata7: end_device-0:0: dev error handler [ 8.891516] sas: ata8: end_device-0:1: dev error handler [ 8.891519] sas: ata9: end_device-0:2: dev error handler [ 8.968412] systemd[1]: Inserted module 'autofs4' [ 8.992822] systemd[1]: systemd 245.5-2ubuntu2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 9.009294] systemd[1]: Detected architecture x86-64. [ 9.029585] systemd[1]: Set hostname to ... [ 9.050395] ata9.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 9.050399] ata9.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 9.181511] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 9.202963] systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 9.253799] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update the unit file accordingly. [ 9.278117] ata9.00: configured for UDMA/133 [ 9.278139] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.283039] systemd[1]: Created slice system-modprobe.slice. [ 9.283257] systemd[1]: Created slice system-postfix.slice. [ 9.283444] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 9.283679] systemd[1]: Created slice system-tor.slice. [ 9.283866] systemd[1]: Created slice User and Session Slice. [ 9.283908] systemd[1]: Started ntp-systemd-netif.path. [ 9.283961] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.284213] systemd[1]: Set up automount ... [ 9.284267] systemd[1]: Reached target User and Group Name Lookups. [ 9.284283] systemd[1]: Reached target Slices. [ 9.288068] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.288405] scsi 0:0:2:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 9.288437] sas: DONE DISCOVERY on port 2, pid:190, result:0 [ 9.288467] sas: phy-0:5 added to port-0:3, phy_mask:0x2 ( 500000000000000) [ 9.288552] sas: DOING DISCOVERY on port 3, pid:190 [ 9.288559] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.288569] sas: ata7: end_device-0:0: dev error handler [ 9.288571] sas: ata8: end_device-0:1: dev error handler [ 9.288577] sas: ata9: end_device-0:2: dev error handler [ 9.288578] sas: ata10: end_device-0:3: dev error handler [ 9.289370] systemd[1]: Listening on Syslog Socket. [ 9.290576] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.290686] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.290872] systemd[1]: Listening on Journal Audit Socket. [ 9.290956] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.291061] systemd[1]: Listening on Journal Socket. [ 9.291161] systemd[1]: Listening on udev Control Socket. [ 9.291222] systemd[1]: Listening on udev Kernel Socket. [ 9.292112] systemd[1]: Mounting Huge Pages File System... [ 9.293083] systemd[1]: Mounting POSIX Message Queue File System... [ 9.294070] systemd[1]: Mounting NFSD configuration filesystem... [ 9.295601] systemd[1]: Mounting RPC Pipe File System... [ 9.297281] systemd[1]: Mounting Kernel Debug File System... [ 9.298582] systemd[1]: Mounting Kernel Trace File System... [ 9.300755] systemd[1]: Starting Journal Service... [ 9.300971] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 9.302354] systemd[1]: Starting Set the console keyboard layout... [ 9.303851] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.305207] systemd[1]: Starting Load Kernel Module drm... [ 9.306223] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 9.306305] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.309360] systemd[1]: Starting Load Kernel Modules... [ 9.318949] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.320235] systemd[1]: Starting udev Coldplug all Devices... [ 9.321700] systemd[1]: Starting Uncomplicated firewall... [ 9.322926] systemd[1]: Started Read required files in advance. [ 9.329280] systemd[1]: Mounted Huge Pages File System. [ 9.329473] systemd[1]: Mounted POSIX Message Queue File System. [ 9.330501] systemd[1]: Mounted Kernel Debug File System. [ 9.330679] systemd[1]: Mounted Kernel Trace File System. [ 9.332797] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.334353] systemd[1]: Finished Uncomplicated firewall. [ 9.336069] systemd[1]: XXX@XXX: Succeeded. [ 9.336443] RPC: Registered named UNIX socket transport module. [ 9.336444] RPC: Registered udp transport module. [ 9.336445] RPC: Registered tcp transport module. [ 9.336446] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.336570] systemd[1]: Finished Load Kernel Module drm. [ 9.340679] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.342584] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.346586] lp: driver loaded but no devices found [ 9.348266] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.348334] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.350180] systemd[1]: Starting Create System Users... [ 9.351806] systemd[1]: Mounted RPC Pipe File System. [ 9.354962] systemd[1]: Starting pNFS block layout mapping daemon... [ 9.363717] systemd[1]: Started pNFS block layout mapping daemon. [ 9.367295] ppdev: user-space parallel port driver [ 9.383283] systemd[1]: Finished Create System Users. [ 9.385430] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.395205] Installing knfsd (copyright (C) 1996 XXX@XXX). [ 9.404001] systemd[1]: Mounted NFSD configuration filesystem. [ 9.404731] systemd[1]: Finished Load Kernel Modules. [ 9.406885] systemd[1]: Mounting FUSE Control File System... [ 9.408430] systemd[1]: Mounting Kernel Configuration File System... [ 9.412726] systemd[1]: Starting Apply Kernel Variables... [ 9.416959] systemd[1]: Mounted FUSE Control File System. [ 9.417177] systemd[1]: Mounted Kernel Configuration File System. [ 9.423800] systemd[1]: Finished Create Static Device Nodes in /dev. [ 9.425394] systemd[1]: Starting udev Kernel Device Manager... [ 9.431949] systemd[1]: Finished Apply Kernel Variables. [ 9.447814] ata10.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 9.447817] ata10.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 9.506013] systemd[1]: Finished Set the console keyboard layout. [ 9.506199] systemd[1]: Reached target Local File Systems (Pre). [ 9.518676] systemd[1]: Mounting Mount unit for canonical-livepatch, revision 94... [ 9.521939] systemd[1]: Mounting Mount unit for canonical-livepatch, revision 95... [ 9.524949] systemd[1]: Mounting Mount unit for core, revision 8935... [ 9.527904] systemd[1]: Mounting Mount unit for core, revision 9066... [ 9.529693] systemd[1]: Mounting Mount unit for core18, revision 1705... [ 9.531324] systemd[1]: Mounting Mount unit for core18, revision 1754... [ 9.533814] systemd[1]: Mounting Mount unit for gnome-3-26-1604, revision 97... [ 9.538380] systemd[1]: Mounting Mount unit for gnome-3-26-1604, revision 98... [ 9.544020] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 110... [ 9.547007] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 116... [ 9.551651] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33... [ 9.631379] systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 135... [ 9.634049] systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 145... [ 9.652272] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1502... [ 9.659066] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506... [ 9.665889] systemd[1]: Mounting Mount unit for snap-store, revision 433... [ 9.669982] systemd[1]: Mounting Mount unit for snap-store, revision 454... [ 9.670081] ata10.00: configured for UDMA/133 [ 9.670102] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.676808] systemd[1]: Finished udev Coldplug all Devices. [ 9.680490] scsi 0:0:3:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 9.680528] sas: DONE DISCOVERY on port 3, pid:190, result:0 [ 9.680574] sas: phy-0:6 added to port-0:4, phy_mask:0x4 ( 600000000000000) [ 9.680662] sas: DOING DISCOVERY on port 4, pid:190 [ 9.680670] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.680679] sas: ata7: end_device-0:0: dev error handler [ 9.680683] sas: ata8: end_device-0:1: dev error handler [ 9.680688] sas: ata9: end_device-0:2: dev error handler [ 9.680691] sas: ata10: end_device-0:3: dev error handler [ 9.680692] sas: ata11: end_device-0:4: dev error handler [ 9.701734] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 9.703183] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 9.706087] systemd[1]: Mounted Mount unit for core, revision 8935. [ 9.706304] systemd[1]: Mounted Mount unit for gnome-3-26-1604, revision 98. [ 9.706483] systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 110. [ 9.742317] systemd[1]: Mounted Mount unit for canonical-livepatch, revision 94. [ 9.742451] systemd[1]: Mounted Mount unit for core, revision 9066. [ 9.742572] systemd[1]: Mounted Mount unit for core18, revision 1754. [ 9.742672] systemd[1]: Mounted Mount unit for gnome-3-26-1604, revision 97. [ 9.823933] systemd[1]: Started Journal Service. [ 9.831405] systemd-journald[391]: Received client request to flush runtime journal. [ 9.838524] ata11.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 9.838526] ata11.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 9.839855] ata11.00: configured for UDMA/133 [ 9.839883] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.840117] scsi 0:0:4:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 9.840145] sas: DONE DISCOVERY on port 4, pid:190, result:0 [ 9.840189] sas: phy-0:7 added to port-0:5, phy_mask:0x8 ( 700000000000000) [ 9.840272] sas: DOING DISCOVERY on port 5, pid:190 [ 9.840278] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.840285] sas: ata7: end_device-0:0: dev error handler [ 9.840288] sas: ata8: end_device-0:1: dev error handler [ 9.840293] sas: ata9: end_device-0:2: dev error handler [ 9.840295] sas: ata10: end_device-0:3: dev error handler [ 9.840296] sas: ata11: end_device-0:4: dev error handler [ 9.840297] sas: ata12: end_device-0:5: dev error handler [ 9.998477] ata12.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133 [ 9.998480] ata12.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32) [ 9.999776] ata12.00: configured for UDMA/133 [ 9.999799] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 10.010187] scsi 0:0:5:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5 [ 10.010220] sas: DONE DISCOVERY on port 5, pid:190, result:0 [ 10.010471] sd 0:0:0:0: [sdg] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.010473] sd 0:0:0:0: [sdg] 4096-byte physical blocks [ 10.010485] sd 0:0:0:0: [sdg] Write Protect is off [ 10.010487] sd 0:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 10.010506] sd 0:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.010542] sd 0:0:0:0: Attached scsi generic sg6 type 0 [ 10.010710] scsi 0:0:1:0: Attached scsi generic sg7 type 0 [ 10.010970] sd 0:0:2:0: [sdi] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.010972] sd 0:0:2:0: [sdi] 4096-byte physical blocks [ 10.010982] sd 0:0:2:0: [sdi] Write Protect is off [ 10.010984] sd 0:0:2:0: [sdi] Mode Sense: 00 3a 00 00 [ 10.010999] sd 0:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011112] sd 0:0:1:0: [sdh] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.011114] sd 0:0:1:0: [sdh] 4096-byte physical blocks [ 10.011123] sd 0:0:1:0: [sdh] Write Protect is off [ 10.011125] sd 0:0:1:0: [sdh] Mode Sense: 00 3a 00 00 [ 10.011145] sd 0:0:2:0: Attached scsi generic sg8 type 0 [ 10.011191] sd 0:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011434] sd 0:0:3:0: [sdj] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.011436] sd 0:0:3:0: [sdj] 4096-byte physical blocks [ 10.011446] sd 0:0:3:0: [sdj] Write Protect is off [ 10.011448] sd 0:0:3:0: [sdj] Mode Sense: 00 3a 00 00 [ 10.011463] sd 0:0:3:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011497] sd 0:0:3:0: Attached scsi generic sg9 type 0 [ 10.011864] sd 0:0:4:0: [sdk] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.011866] sd 0:0:4:0: [sdk] 4096-byte physical blocks [ 10.011877] sd 0:0:4:0: [sdk] Write Protect is off [ 10.011879] sd 0:0:4:0: [sdk] Mode Sense: 00 3a 00 00 [ 10.011895] sd 0:0:4:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011931] sd 0:0:4:0: Attached scsi generic sg10 type 0 [ 10.012162] sd 0:0:5:0: [sdl] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.012164] sd 0:0:5:0: [sdl] 4096-byte physical blocks [ 10.012173] sd 0:0:5:0: [sdl] Write Protect is off [ 10.012175] sd 0:0:5:0: [sdl] Mode Sense: 00 3a 00 00 [ 10.012190] sd 0:0:5:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.012220] sd 0:0:5:0: Attached scsi generic sg11 type 0 [ 10.084557] sdi: sdi1 sdi9 [ 10.085045] sd 0:0:2:0: [sdi] Attached SCSI disk [ 10.088019] sdg: sdg1 sdg9 [ 10.088465] sd 0:0:0:0: [sdg] Attached SCSI disk [ 10.094462] sdh: sdh1 sdh9 [ 10.094898] sd 0:0:1:0: [sdh] Attached SCSI disk [ 10.098089] sdl: sdl1 sdl9 [ 10.098527] sd 0:0:5:0: [sdl] Attached SCSI disk [ 10.116684] sdk: sdk1 sdk9 [ 10.117696] sd 0:0:4:0: [sdk] Attached SCSI disk [ 10.120817] sdj: sdj1 sdj9 [ 10.121381] sd 0:0:3:0: [sdj] Attached SCSI disk [ 10.366892] IPMI message handler: version 39.2 [ 10.376423] ipmi device interface [ 10.435931] ipmi_si: IPMI System Interface driver [ 10.435958] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 10.435961] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 10.435962] ipmi_si: Adding SMBIOS-specified kcs state machine [ 10.436950] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 10.437234] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 10.437237] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 10.437239] ipmi_si: Adding ACPI-specified kcs state machine [ 10.437322] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 10.538354] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 10.538458] ioatdma 0000:02:00.0: enabling device (0104 -> 0106) [ 10.559285] ioatdma 0000:02:00.1: enabling device (0104 -> 0106) [ 10.579814] ioatdma 0000:02:00.2: enabling device (0104 -> 0106) [ 10.594506] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 10.596716] ioatdma 0000:02:00.3: enabling device (0104 -> 0106) [ 10.727360] intel_pch_thermal 0000:00:1f.6: enabling device (0000 -> 0002) [ 10.732820] checking generic (fa000000 1d5000) vs hw (fa000000 1000000) [ 10.732822] fb0: switching to astdrmfb from EFI VGA [ 10.732934] Console: switching to colour dummy device 80x25 [ 10.733231] [drm] P2A bridge disabled, using default configuration [ 10.733232] [drm] AST 2400 detected [ 10.733243] [drm] Analog VGA only [ 10.733255] [drm] dram MCLK=396 Mhz type=1 bus_width=16 size=01000000 [ 10.734556] [TTM] Zone kernel: Available graphics memory: 8146330 KiB [ 10.734558] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 10.734559] [TTM] Initializing pool allocator [ 10.734565] [TTM] Initializing DMA pool allocator [ 10.741116] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.850429] fbcon: astdrmfb (fb0) is primary device [ 10.869887] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x086d, dev_id: 0x20) [ 10.882952] Console: switching to colour frame buffer device 160x64 [ 10.887524] ast 0000:07:00.0: fb0: astdrmfb frame buffer device [ 10.925772] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 10.925775] RAPL PMU: hw unit of domain package 2^-14 Joules [ 10.925775] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 10.933121] [drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0 [ 11.032015] cryptd: max_cpu_qlen set to 1000 [ 11.067076] AVX2 version of gcm_enc/dec engaged. [ 11.067078] AES CTR mode by8 optimization enabled [ 11.238164] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 11.242389] ipmi_ssif: IPMI SSIF Interface driver [ 11.376679] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 11.376692] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 11.376707] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 11.376715] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 11.376718] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 11.376724] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 11.376728] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 11.376734] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 11.376738] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 11.376743] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 11.376747] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 11.376752] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 11.376757] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 11.376763] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 11.376767] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 11.376773] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 11.376781] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 11.376789] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 11.376796] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 11.376804] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 11.376812] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 11.376820] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 11.376823] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 11.376830] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 11.376834] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 11.376840] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 11.376845] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 11.376944] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) [ 11.376946] EDAC sbridge: Ver: 1.1.2 [ 11.709826] zlua: loading out-of-tree module taints kernel. [ 11.709830] zlua: module license 'MIT' taints kernel. [ 11.709831] Disabling lock debugging due to kernel taint [ 11.725124] Adding 16671740k swap on /dev/sda3. Priority:-2 extents:1 across:16671740k SSFS [ 11.930528] intel_rapl_common: Found RAPL domain package [ 11.930534] intel_rapl_common: Found RAPL domain dram [ 13.861960] ZFS: Loaded module v0.8.3-1ubuntu12, ZFS pool version 5000, ZFS filesystem version 5 [ 46.233143] sas: Enter sas_scsi_recover_host busy: 18 failed: 18 [ 46.233149] sas: trying to find task 0x000000007d5d0828 [ 46.233150] sas: sas_scsi_find_task: aborting task 0x000000007d5d0828 [ 46.233153] sas: sas_scsi_find_task: task 0x000000007d5d0828 is aborted [ 46.233154] sas: sas_eh_handle_sas_errors: task 0x000000007d5d0828 is aborted [ 46.233156] sas: trying to find task 0x00000000c204b4c7 [ 46.233156] sas: sas_scsi_find_task: aborting task 0x00000000c204b4c7 [ 46.233159] sas: sas_scsi_find_task: task 0x00000000c204b4c7 is aborted [ 46.233160] sas: sas_eh_handle_sas_errors: task 0x00000000c204b4c7 is aborted [ 46.233161] sas: trying to find task 0x00000000fd68032c [ 46.233161] sas: sas_scsi_find_task: aborting task 0x00000000fd68032c [ 46.233163] sas: sas_scsi_find_task: task 0x00000000fd68032c is aborted [ 46.233163] sas: sas_eh_handle_sas_errors: task 0x00000000fd68032c is aborted [ 46.233164] sas: trying to find task 0x00000000ac06f133 [ 46.233164] sas: sas_scsi_find_task: aborting task 0x00000000ac06f133 [ 46.233166] sas: sas_scsi_find_task: task 0x00000000ac06f133 is aborted [ 46.233166] sas: sas_eh_handle_sas_errors: task 0x00000000ac06f133 is aborted [ 46.233167] sas: trying to find task 0x0000000026e86cd2 [ 46.233167] sas: sas_scsi_find_task: aborting task 0x0000000026e86cd2 [ 46.233169] sas: sas_scsi_find_task: task 0x0000000026e86cd2 is aborted [ 46.233169] sas: sas_eh_handle_sas_errors: task 0x0000000026e86cd2 is aborted [ 46.233170] sas: trying to find task 0x00000000b3779f2f [ 46.233171] sas: sas_scsi_find_task: aborting task 0x00000000b3779f2f [ 46.233172] sas: sas_scsi_find_task: task 0x00000000b3779f2f is aborted [ 46.233172] sas: sas_eh_handle_sas_errors: task 0x00000000b3779f2f is aborted [ 46.233173] sas: trying to find task 0x000000002c30cfcd [ 46.233173] sas: sas_scsi_find_task: aborting task 0x000000002c30cfcd [ 46.233174] sas: sas_scsi_find_task: task 0x000000002c30cfcd is aborted [ 46.233175] sas: sas_eh_handle_sas_errors: task 0x000000002c30cfcd is aborted [ 46.233176] sas: trying to find task 0x000000005e0a31af [ 46.233176] sas: sas_scsi_find_task: aborting task 0x000000005e0a31af [ 46.233177] sas: sas_scsi_find_task: task 0x000000005e0a31af is aborted [ 46.233177] sas: sas_eh_handle_sas_errors: task 0x000000005e0a31af is aborted [ 46.233178] sas: trying to find task 0x00000000e03a1412 [ 46.233178] sas: sas_scsi_find_task: aborting task 0x00000000e03a1412 [ 46.233179] sas: sas_scsi_find_task: task 0x00000000e03a1412 is aborted [ 46.233180] sas: sas_eh_handle_sas_errors: task 0x00000000e03a1412 is aborted [ 46.233180] sas: trying to find task 0x00000000b15a14d7 [ 46.233181] sas: sas_scsi_find_task: aborting task 0x00000000b15a14d7 [ 46.233182] sas: sas_scsi_find_task: task 0x00000000b15a14d7 is aborted [ 46.233183] sas: sas_eh_handle_sas_errors: task 0x00000000b15a14d7 is aborted [ 46.233183] sas: trying to find task 0x000000004220d507 [ 46.233184] sas: sas_scsi_find_task: aborting task 0x000000004220d507 [ 46.233185] sas: sas_scsi_find_task: task 0x000000004220d507 is aborted [ 46.233185] sas: sas_eh_handle_sas_errors: task 0x000000004220d507 is aborted [ 46.233186] sas: trying to find task 0x00000000751f29fe [ 46.233186] sas: sas_scsi_find_task: aborting task 0x00000000751f29fe [ 46.233187] sas: sas_scsi_find_task: task 0x00000000751f29fe is aborted [ 46.233188] sas: sas_eh_handle_sas_errors: task 0x00000000751f29fe is aborted [ 46.233188] sas: trying to find task 0x000000000e3e6aa7 [ 46.233189] sas: sas_scsi_find_task: aborting task 0x000000000e3e6aa7 [ 46.233190] sas: sas_scsi_find_task: task 0x000000000e3e6aa7 is aborted [ 46.233191] sas: sas_eh_handle_sas_errors: task 0x000000000e3e6aa7 is aborted [ 46.233192] sas: trying to find task 0x0000000015efa687 [ 46.233192] sas: sas_scsi_find_task: aborting task 0x0000000015efa687 [ 46.233193] sas: sas_scsi_find_task: task 0x0000000015efa687 is aborted [ 46.233193] sas: sas_eh_handle_sas_errors: task 0x0000000015efa687 is aborted [ 46.233194] sas: trying to find task 0x00000000c4477111 [ 46.233195] sas: sas_scsi_find_task: aborting task 0x00000000c4477111 [ 46.233195] sas: sas_scsi_find_task: task 0x00000000c4477111 is aborted [ 46.233196] sas: sas_eh_handle_sas_errors: task 0x00000000c4477111 is aborted [ 46.233197] sas: trying to find task 0x0000000003ef5d1d [ 46.233197] sas: sas_scsi_find_task: aborting task 0x0000000003ef5d1d [ 46.233198] sas: sas_scsi_find_task: task 0x0000000003ef5d1d is aborted [ 46.233199] sas: sas_eh_handle_sas_errors: task 0x0000000003ef5d1d is aborted [ 46.233200] sas: trying to find task 0x000000009cea6589 [ 46.233200] sas: sas_scsi_find_task: aborting task 0x000000009cea6589 [ 46.233201] sas: sas_scsi_find_task: task 0x000000009cea6589 is aborted [ 46.233201] sas: sas_eh_handle_sas_errors: task 0x000000009cea6589 is aborted [ 46.233202] sas: trying to find task 0x000000000002b3a4 [ 46.233203] sas: sas_scsi_find_task: aborting task 0x000000000002b3a4 [ 46.233203] sas: sas_scsi_find_task: task 0x000000000002b3a4 is aborted [ 46.233204] sas: sas_eh_handle_sas_errors: task 0x000000000002b3a4 is aborted [ 46.233207] sas: ata7: end_device-0:0: cmd error handler [ 46.233210] sas: ata12: end_device-0:5: cmd error handler [ 46.233212] sas: ata9: end_device-0:2: cmd error handler [ 46.233215] sas: ata11: end_device-0:4: cmd error handler [ 46.233217] sas: ata10: end_device-0:3: cmd error handler [ 46.233219] sas: ata8: end_device-0:1: cmd error handler [ 46.233267] sas: ata7: end_device-0:0: dev error handler [ 46.233274] sas: ata8: end_device-0:1: dev error handler [ 46.233276] ata7.00: exception Emask 0x0 SAct 0x1c00000 SErr 0x0 action 0x6 frozen [ 46.233279] sas: ata9: end_device-0:2: dev error handler [ 46.233281] ata7.00: failed command: READ FPDMA QUEUED [ 46.233287] ata7.00: cmd 60/10:00:10:e6:80/00:00:a3:03:00/40 tag 22 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233289] ata9.00: exception Emask 0x0 SAct 0x380000 SErr 0x0 action 0x6 frozen [ 46.233291] ata8.00: exception Emask 0x0 SAct 0x3800000 SErr 0x0 action 0x6 frozen [ 46.233293] sas: ata10: end_device-0:3: dev error handler [ 46.233295] ata9.00: failed command: READ FPDMA QUEUED [ 46.233296] ata8.00: failed command: WRITE FPDMA QUEUED [ 46.233302] ata9.00: cmd 60/10:00:10:e6:80/00:00:a3:03:00/40 tag 19 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233304] ata10.00: exception Emask 0x0 SAct 0x3800000 SErr 0x0 action 0x6 frozen [ 46.233309] ata8.00: cmd 61/10:00:10:0a:00/00:00:00:00:00/40 tag 23 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233311] ata9.00: status: { DRDY } [ 46.233312] ata10.00: failed command: READ FPDMA QUEUED [ 46.233314] ata8.00: status: { DRDY } [ 46.233316] ata9.00: failed command: WRITE FPDMA QUEUED [ 46.233320] ata10.00: cmd 60/10:00:10:e4:80/00:00:a3:03:00/40 tag 23 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233322] ata8.00: failed command: WRITE FPDMA QUEUED [ 46.233326] ata9.00: cmd 61/10:00:10:0a:00/00:00:00:00:00/40 tag 20 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233327] ata10.00: status: { DRDY } [ 46.233332] ata8.00: cmd 61/10:00:10:e4:80/00:00:a3:03:00/40 tag 24 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233334] ata9.00: status: { DRDY } [ 46.233335] ata10.00: failed command: READ FPDMA QUEUED [ 46.233336] ata8.00: status: { DRDY } [ 46.233337] ata9.00: failed command: WRITE FPDMA QUEUED [ 46.233342] ata10.00: cmd 60/10:00:10:e6:80/00:00:a3:03:00/40 tag 24 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233343] ata8.00: failed command: WRITE FPDMA QUEUED [ 46.233348] ata9.00: cmd 61/10:00:10:e4:80/00:00:a3:03:00/40 tag 21 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233349] ata10.00: status: { DRDY } [ 46.233354] ata8.00: cmd 61/10:00:10:e6:80/00:00:a3:03:00/40 tag 25 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233355] ata9.00: status: { DRDY } [ 46.233356] ata10.00: failed command: WRITE FPDMA QUEUED [ 46.233358] ata8.00: status: { DRDY } [ 46.233362] ata10.00: cmd 61/10:00:10:0a:00/00:00:00:00:00/40 tag 25 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233364] ata9: hard resetting link [ 46.233365] ata8: hard resetting link [ 46.233366] ata10.00: status: { DRDY } [ 46.233369] ata10: hard resetting link [ 46.233381] ata7.00: status: { DRDY } [ 46.233383] ata7.00: failed command: WRITE FPDMA QUEUED [ 46.233387] ata7.00: cmd 61/10:00:10:e4:80/00:00:a3:03:00/40 tag 23 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233389] ata7.00: status: { DRDY } [ 46.233391] ata7.00: failed command: WRITE FPDMA QUEUED [ 46.233395] ata7.00: cmd 61/10:00:10:0a:00/00:00:00:00:00/40 tag 24 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.233397] ata7.00: status: { DRDY } [ 46.233399] ata7: hard resetting link [ 46.243309] sas: ata11: end_device-0:4: dev error handler [ 46.243314] ata11.00: exception Emask 0x0 SAct 0xe00000 SErr 0x0 action 0x6 frozen [ 46.243317] ata11.00: failed command: READ FPDMA QUEUED [ 46.243321] ata11.00: cmd 60/10:00:10:e4:80/00:00:a3:03:00/40 tag 21 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243323] ata11.00: status: { DRDY } [ 46.243324] ata11.00: failed command: READ FPDMA QUEUED [ 46.243329] ata11.00: cmd 60/10:00:10:e6:80/00:00:a3:03:00/40 tag 22 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243333] ata11.00: status: { DRDY } [ 46.243334] ata11.00: failed command: WRITE FPDMA QUEUED [ 46.243338] ata11.00: cmd 61/10:00:10:0a:00/00:00:00:00:00/40 tag 23 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243340] sas: ata12: end_device-0:5: dev error handler [ 46.243342] ata11.00: status: { DRDY } [ 46.243346] ata12.00: exception Emask 0x0 SAct 0x1c0000 SErr 0x0 action 0x6 frozen [ 46.243347] ata11: hard resetting link [ 46.243351] ata12.00: failed command: READ FPDMA QUEUED [ 46.243363] ata12.00: cmd 60/10:00:10:0a:00/00:00:00:00:00/40 tag 18 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243365] ata12.00: status: { DRDY } [ 46.243367] ata12.00: failed command: READ FPDMA QUEUED [ 46.243371] ata12.00: cmd 60/10:00:10:e4:80/00:00:a3:03:00/40 tag 19 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243373] ata12.00: status: { DRDY } [ 46.243376] ata12.00: failed command: READ FPDMA QUEUED [ 46.243381] ata12.00: cmd 60/10:00:10:e6:80/00:00:a3:03:00/40 tag 20 ncq dma 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 46.243382] ata12.00: status: { DRDY } [ 46.243398] ata12: hard resetting link [ 48.477122] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 48.477142] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[3]:rc= 0 [ 48.477154] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[2]:rc= 0 [ 48.477175] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 48.477180] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 48.477212] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 53.885200] ata7.00: qc timeout (cmd 0xec) [ 53.885201] ata9.00: qc timeout (cmd 0xec) [ 53.885204] ata8.00: qc timeout (cmd 0xec) [ 53.885206] ata12.00: qc timeout (cmd 0xec) [ 53.885208] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.885209] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.885210] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.885212] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.885213] ata8.00: revalidation failed (errno=-5) [ 53.885214] ata12.00: revalidation failed (errno=-5) [ 53.885216] ata9.00: revalidation failed (errno=-5) [ 53.885217] ata8: hard resetting link [ 53.885218] ata12: hard resetting link [ 53.885220] ata9: hard resetting link [ 53.885222] ata7.00: revalidation failed (errno=-5) [ 53.885224] ata7: hard resetting link [ 53.895148] ata11.00: qc timeout (cmd 0xec) [ 53.895151] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.895152] ata11.00: revalidation failed (errno=-5) [ 53.895154] ata10.00: qc timeout (cmd 0xec) [ 53.895156] ata11: hard resetting link [ 53.895157] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.895158] ata10.00: revalidation failed (errno=-5) [ 53.895160] ata10: hard resetting link [ 56.125181] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 56.125187] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 56.125195] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[3]:rc= 0 [ 56.125201] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[2]:rc= 0 [ 56.125216] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 56.125226] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 66.429186] ata9.00: qc timeout (cmd 0xec) [ 66.429190] ata7.00: qc timeout (cmd 0xec) [ 66.429197] ata8.00: qc timeout (cmd 0xec) [ 66.429202] ata11.00: qc timeout (cmd 0xec) [ 66.429207] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.429211] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.429214] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.429219] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.429222] ata8.00: revalidation failed (errno=-5) [ 66.429225] ata11.00: revalidation failed (errno=-5) [ 66.429232] ata7.00: revalidation failed (errno=-5) [ 66.429235] ata8: hard resetting link [ 66.429237] ata11: hard resetting link [ 66.429242] ata7: hard resetting link [ 66.429247] ata9.00: revalidation failed (errno=-5) [ 66.429254] ata9: hard resetting link [ 66.439166] ata10.00: qc timeout (cmd 0xec) [ 66.439169] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.439170] ata10.00: revalidation failed (errno=-5) [ 66.439172] ata12.00: qc timeout (cmd 0xec) [ 66.439174] ata10: hard resetting link [ 66.439175] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.439176] ata12.00: revalidation failed (errno=-5) [ 66.439178] ata12: hard resetting link [ 68.669186] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 68.669192] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 68.669199] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[2]:rc= 0 [ 68.669204] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 68.669216] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[3]:rc= 0 [ 68.669219] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 99.453121] ata9.00: qc timeout (cmd 0xec) [ 99.453123] ata7.00: qc timeout (cmd 0xec) [ 99.453126] ata12.00: qc timeout (cmd 0xec) [ 99.453129] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.453131] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.453132] ata7.00: revalidation failed (errno=-5) [ 99.453135] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.453136] ata7.00: disabled [ 99.453138] ata12.00: revalidation failed (errno=-5) [ 99.453140] ata9.00: revalidation failed (errno=-5) [ 99.453142] ata9.00: disabled [ 99.453143] ata12.00: disabled [ 99.453413] ata8.00: qc timeout (cmd 0xec) [ 99.453417] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.453419] ata8.00: revalidation failed (errno=-5) [ 99.453421] ata8.00: disabled [ 99.463082] ata11.00: qc timeout (cmd 0xec) [ 99.463085] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.463086] ata11.00: revalidation failed (errno=-5) [ 99.463088] ata11.00: disabled [ 99.463357] ata10.00: qc timeout (cmd 0xec) [ 99.463359] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 99.463360] ata10.00: revalidation failed (errno=-5) [ 99.463362] ata10.00: disabled [ 101.693224] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 101.693230] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 101.693237] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 101.693243] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[2]:rc= 0 [ 101.693255] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[1]:rc= 0 [ 101.693258] drivers/scsi/mvsas/mv_sas.c 1417:mvs_I_T_nexus_reset for device[3]:rc= 0 [ 101.853197] ata12: EH complete [ 101.853198] ata8: EH complete [ 101.853200] ata7: EH complete [ 101.853201] ata9: EH complete [ 101.853222] ata11: EH complete [ 101.853223] ata10: EH complete [ 101.853230] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 18 tries: 1 [ 101.853269] sd 0:0:0:0: [sdg] tag#1968 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853272] sd 0:0:0:0: [sdg] tag#1968 CDB: Write(16) 8a 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00 [ 101.853274] blk_update_request: I/O error, dev sdg, sector 2576 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853282] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=2 offset=270336 size=8192 flags=b08c1 [ 101.853294] sd 0:0:0:0: [sdg] tag#1969 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853295] sd 0:0:0:0: [sdg] tag#1969 CDB: Write(16) 8a 00 00 00 00 03 a3 80 e4 10 00 00 00 10 00 00 [ 101.853296] blk_update_request: I/O error, dev sdg, sector 15628035088 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853299] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=2 offset=8001552916480 size=8192 flags=b08c1 [ 101.853302] sd 0:0:0:0: [sdg] tag#1970 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853303] sd 0:0:0:0: [sdg] tag#1970 CDB: Read(16) 88 00 00 00 00 03 a3 80 e6 10 00 00 00 10 00 00 [ 101.853305] blk_update_request: I/O error, dev sdg, sector 15628035600 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 101.853307] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.853311] sd 0:0:1:0: [sdh] tag#1971 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853312] sd 0:0:1:0: [sdh] tag#1971 CDB: Write(16) 8a 00 00 00 00 03 a3 80 e6 10 00 00 00 10 00 00 [ 101.853313] blk_update_request: I/O error, dev sdh, sector 15628035600 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853316] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=2 offset=8001553178624 size=8192 flags=b08c1 [ 101.853319] sd 0:0:1:0: [sdh] tag#1972 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853321] sd 0:0:1:0: [sdh] tag#1972 CDB: Write(16) 8a 00 00 00 00 03 a3 80 e4 10 00 00 00 10 00 00 [ 101.853322] blk_update_request: I/O error, dev sdh, sector 15628035088 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853324] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=2 offset=8001552916480 size=8192 flags=b08c1 [ 101.853326] sd 0:0:1:0: [sdh] tag#1973 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853328] sd 0:0:1:0: [sdh] tag#1973 CDB: Write(16) 8a 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00 [ 101.853329] blk_update_request: I/O error, dev sdh, sector 2576 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853331] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=2 offset=270336 size=8192 flags=b08c1 [ 101.853335] sd 0:0:2:0: [sdi] tag#1974 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853336] sd 0:0:2:0: [sdi] tag#1974 CDB: Write(16) 8a 00 00 00 00 03 a3 80 e4 10 00 00 00 10 00 00 [ 101.853337] blk_update_request: I/O error, dev sdi, sector 15628035088 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853339] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=2 offset=8001552916480 size=8192 flags=b08c1 [ 101.853343] sd 0:0:2:0: [sdi] tag#1975 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853344] sd 0:0:2:0: [sdi] tag#1975 CDB: Write(16) 8a 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00 [ 101.853345] blk_update_request: I/O error, dev sdi, sector 2576 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853347] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=2 offset=270336 size=8192 flags=b08c1 [ 101.853350] sd 0:0:2:0: [sdi] tag#1976 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853351] sd 0:0:2:0: [sdi] tag#1976 CDB: Read(16) 88 00 00 00 00 03 a3 80 e6 10 00 00 00 10 00 00 [ 101.853352] blk_update_request: I/O error, dev sdi, sector 15628035600 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 101.853354] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.853358] sd 0:0:3:0: [sdj] tag#1977 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 101.853359] sd 0:0:3:0: [sdj] tag#1977 CDB: Write(16) 8a 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00 [ 101.853360] blk_update_request: I/O error, dev sdj, sector 2576 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [ 101.853362] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=2 offset=270336 size=8192 flags=b08c1 [ 101.853367] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.853370] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.853374] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=2 offset=270336 size=8192 flags=b08c1 [ 101.853378] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.853382] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.853386] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.853390] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.853393] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860713] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860715] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860725] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860727] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860729] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860733] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.860735] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.860739] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860743] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.860747] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860752] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860755] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.860800] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860826] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860848] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 101.860951] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 101.860972] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 101.860989] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 191.086287] bpfilter: Loaded bpfilter_umh pid 1785 [ 191.086657] Started bpfilter [ 191.202948] pps pps0: new PPS source ptp0 [ 191.203041] ixgbe 0000:03:00.1: registered PHC device on eno4 [ 192.928945] pps pps1: new PPS source ptp1 [ 192.929021] ixgbe 0000:03:00.0: registered PHC device on eno3 [ 193.249573] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 193.249782] NFSD: Using legacy client tracking operations. [ 193.249785] NFSD: starting 90-second grace period (net f00000a0) [ 197.604655] ixgbe 0000:03:00.1 eno4: NIC Link is Up 1 Gbps, Flow Control: RX/TX [ 197.604848] IPv6: ADDRCONF(NETDEV_CHANGE): eno4: link becomes ready [ 198.867251] rfkill: input handler disabled [ 275.955154] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 275.955456] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 275.955470] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 723.344303] scsi_io_completion_action: 24 callbacks suppressed [ 723.344309] sd 0:0:5:0: [sdl] tag#1920 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.344314] sd 0:0:5:0: [sdl] tag#1920 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.344315] print_req_error: 25 callbacks suppressed [ 723.344317] blk_update_request: I/O error, dev sdl, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 723.344439] sd 0:0:5:0: [sdl] tag#1921 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.344446] sd 0:0:5:0: [sdl] tag#1921 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.344452] blk_update_request: I/O error, dev sdl, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 723.344460] Buffer I/O error on dev sdl1, logical block 1953504240, async page read [ 723.344906] sd 0:0:5:0: [sdl] tag#1922 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.344912] sd 0:0:5:0: [sdl] tag#1922 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 723.344917] blk_update_request: I/O error, dev sdl, sector 15628052352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 723.344997] sd 0:0:5:0: [sdl] tag#1923 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.345000] sd 0:0:5:0: [sdl] tag#1923 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 723.345003] blk_update_request: I/O error, dev sdl, sector 15628052352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 723.345007] Buffer I/O error on dev sdl9, logical block 2032, async page read [ 723.345255] sd 0:0:4:0: [sdk] tag#1924 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.345257] sd 0:0:4:0: [sdk] tag#1924 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.345260] blk_update_request: I/O error, dev sdk, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 723.345370] sd 0:0:4:0: [sdk] tag#1925 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.345377] sd 0:0:4:0: [sdk] tag#1925 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.345383] blk_update_request: I/O error, dev sdk, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 723.345390] Buffer I/O error on dev sdk1, logical block 1953504240, async page read [ 723.345829] sd 0:0:4:0: [sdk] tag#1926 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.345835] sd 0:0:4:0: [sdk] tag#1926 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 723.345840] blk_update_request: I/O error, dev sdk, sector 15628052352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 723.345958] sd 0:0:4:0: [sdk] tag#1927 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.345966] sd 0:0:4:0: [sdk] tag#1927 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 723.345971] blk_update_request: I/O error, dev sdk, sector 15628052352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 723.345979] Buffer I/O error on dev sdk9, logical block 2032, async page read [ 723.346271] sd 0:0:3:0: [sdj] tag#1928 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.346274] sd 0:0:3:0: [sdj] tag#1928 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.346276] blk_update_request: I/O error, dev sdj, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 723.346387] sd 0:0:3:0: [sdj] tag#1929 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 723.346395] sd 0:0:3:0: [sdj] tag#1929 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 723.346401] blk_update_request: I/O error, dev sdj, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 723.346408] Buffer I/O error on dev sdj1, logical block 1953504240, async page read [ 723.346951] Buffer I/O error on dev sdj9, logical block 2032, async page read [ 723.347433] Buffer I/O error on dev sdh1, logical block 1953504240, async page read [ 723.347704] Buffer I/O error on dev sdh9, logical block 2032, async page read [ 723.348202] Buffer I/O error on dev sdi1, logical block 1953504240, async page read [ 723.348429] Buffer I/O error on dev sdi9, logical block 2032, async page read [ 723.476071] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476085] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476088] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.476123] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476207] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476282] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476288] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476311] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476330] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.476366] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.476413] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476448] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476482] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476515] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.476548] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.476583] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.476616] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.476650] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.485758] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.485797] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.485808] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.485813] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.485819] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.485825] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.485830] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.485835] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.485841] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.485856] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.485859] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.485894] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.485958] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.485998] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.486032] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.486100] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 723.486138] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 723.486171] zio pool=bloatlib vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 723.740425] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 723.761979] JFS: nTxBlock = 8192, nTxLock = 65536 [ 723.784698] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 723.822723] QNX4 filesystem 0.2.3 registered. [ 2484.825730] scsi_io_completion_action: 152 callbacks suppressed [ 2484.825741] sd 0:0:5:0: [sdl] tag#1954 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.825748] sd 0:0:5:0: [sdl] tag#1954 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.825751] print_req_error: 152 callbacks suppressed [ 2484.825756] blk_update_request: I/O error, dev sdl, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2484.825907] sd 0:0:5:0: [sdl] tag#1955 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.825915] sd 0:0:5:0: [sdl] tag#1955 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.825921] blk_update_request: I/O error, dev sdl, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2484.825928] buffer_io_error: 62 callbacks suppressed [ 2484.825932] Buffer I/O error on dev sdl1, logical block 1953504240, async page read [ 2484.826392] sd 0:0:5:0: [sdl] tag#1956 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.826398] sd 0:0:5:0: [sdl] tag#1956 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 2484.826403] blk_update_request: I/O error, dev sdl, sector 15628052352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2484.826522] sd 0:0:5:0: [sdl] tag#1957 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.826529] sd 0:0:5:0: [sdl] tag#1957 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 2484.826535] blk_update_request: I/O error, dev sdl, sector 15628052352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2484.826543] Buffer I/O error on dev sdl9, logical block 2032, async page read [ 2484.827026] sd 0:0:4:0: [sdk] tag#1958 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.827032] sd 0:0:4:0: [sdk] tag#1958 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.827036] blk_update_request: I/O error, dev sdk, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2484.827155] sd 0:0:4:0: [sdk] tag#1959 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.827162] sd 0:0:4:0: [sdk] tag#1959 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.827168] blk_update_request: I/O error, dev sdk, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2484.827176] Buffer I/O error on dev sdk1, logical block 1953504240, async page read [ 2484.827643] sd 0:0:4:0: [sdk] tag#1960 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.827649] sd 0:0:4:0: [sdk] tag#1960 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 2484.827654] blk_update_request: I/O error, dev sdk, sector 15628052352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2484.827770] sd 0:0:4:0: [sdk] tag#1961 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.827778] sd 0:0:4:0: [sdk] tag#1961 CDB: Read(16) 88 00 00 00 00 03 a3 81 27 80 00 00 00 08 00 00 [ 2484.827784] blk_update_request: I/O error, dev sdk, sector 15628052352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2484.827791] Buffer I/O error on dev sdk9, logical block 2032, async page read [ 2484.828271] sd 0:0:3:0: [sdj] tag#1962 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.828276] sd 0:0:3:0: [sdj] tag#1962 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.828281] blk_update_request: I/O error, dev sdj, sector 15628035968 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2484.828401] sd 0:0:3:0: [sdj] tag#1963 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 2484.828408] sd 0:0:3:0: [sdj] tag#1963 CDB: Read(16) 88 00 00 00 00 03 a3 80 e7 80 00 00 00 08 00 00 [ 2484.828414] blk_update_request: I/O error, dev sdj, sector 15628035968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2484.828422] Buffer I/O error on dev sdj1, logical block 1953504240, async page read [ 2484.828983] Buffer I/O error on dev sdj9, logical block 2032, async page read [ 2484.829652] Buffer I/O error on dev sdh1, logical block 1953504240, async page read [ 2484.830161] Buffer I/O error on dev sdh9, logical block 2032, async page read [ 2484.830766] Buffer I/O error on dev sdi1, logical block 1953504240, async page read [ 2484.831490] Buffer I/O error on dev sdi9, logical block 2032, async page read [ 2484.957739] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957743] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957789] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.957829] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957832] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q100-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2484.957846] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957874] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.957896] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q02E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2484.957898] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957911] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=270336 size=8192 flags=b08c1 [ 2484.957943] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.957964] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q17E-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2484.957969] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.958017] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.958064] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001552916480 size=8192 flags=b08c1 [ 2484.958098] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q0N3-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2484.958132] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840W96B-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2484.958164] zio pool=$import vdev=/dev/disk/by-id/ata-ST8000AS0002-1NA17Z_Z840Q05L-part1 error=5 type=1 offset=8001553178624 size=8192 flags=b08c1 [ 2496.010888] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 2496.010904] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 2496.010911] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3895.458110] Non-volatile memory driver v1.3 [ 3895.682694] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 3897.186558] scsi_io_completion_action: 32 callbacks suppressed [ 3897.186568] sd 0:0:4:0: [sdk] tag#1942 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.186576] sd 0:0:4:0: [sdk] tag#1942 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 3897.186579] print_req_error: 32 callbacks suppressed [ 3897.186584] blk_update_request: I/O error, dev sdk, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 3897.186754] sd 0:0:4:0: [sdk] tag#1943 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.186765] sd 0:0:4:0: [sdk] tag#1943 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 3897.186790] blk_update_request: I/O error, dev sdk, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3897.186801] buffer_io_error: 2 callbacks suppressed [ 3897.186805] Buffer I/O error on dev sdk, logical block 0, async page read [ 3897.189319] sd 0:0:2:0: [sdi] tag#1944 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.189325] sd 0:0:2:0: [sdi] tag#1944 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 3897.189330] blk_update_request: I/O error, dev sdi, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 3897.189423] sd 0:0:2:0: [sdi] tag#1945 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.189434] sd 0:0:2:0: [sdi] tag#1945 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 3897.189441] blk_update_request: I/O error, dev sdi, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3897.189451] Buffer I/O error on dev sdi, logical block 0, async page read [ 3897.191906] sd 0:0:0:0: [sdg] tag#1946 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.191910] sd 0:0:0:0: [sdg] tag#1946 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 3897.191914] blk_update_request: I/O error, dev sdg, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 3897.191985] sd 0:0:0:0: [sdg] tag#1947 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.191993] sd 0:0:0:0: [sdg] tag#1947 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 3897.192000] blk_update_request: I/O error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3897.192006] Buffer I/O error on dev sdg, logical block 0, async page read [ 3897.197075] sd 0:0:5:0: [sdl] tag#1948 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.197083] sd 0:0:5:0: [sdl] tag#1948 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 3897.197088] blk_update_request: I/O error, dev sdl, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 3897.197158] sd 0:0:5:0: [sdl] tag#1949 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.197163] sd 0:0:5:0: [sdl] tag#1949 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 3897.197167] blk_update_request: I/O error, dev sdl, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3897.197172] Buffer I/O error on dev sdl, logical block 0, async page read [ 3897.200121] sd 0:0:3:0: [sdj] tag#1950 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.200124] sd 0:0:3:0: [sdj] tag#1950 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 3897.200127] blk_update_request: I/O error, dev sdj, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 3897.200195] sd 0:0:3:0: [sdj] tag#1951 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3897.200202] sd 0:0:3:0: [sdj] tag#1951 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 3897.200207] blk_update_request: I/O error, dev sdj, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3897.200213] Buffer I/O error on dev sdj, logical block 0, async page read [ 3897.201832] Buffer I/O error on dev sdh, logical block 0, async page read [ 3901.968216] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3901.968238] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3901.968246] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3901.993849] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3901.993865] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3901.993873] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.016174] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.016190] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.016198] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.042102] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.042123] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.042131] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.068184] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.068199] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.068206] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.094800] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.094816] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [ 3902.094824] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO