[ 0.000000] Linux version 4.19.0-12-amd64 (XXX@XXX) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.152-1 (2020-10-18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=HASH_615-4023-5643-5D93-EB8E35DAEF01 ro quiet splash resume=UUID=HASH_E14-76C1-6594-38BA-BD9D3D070449 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM2NF6G-VSTA, BIOS P1.20 08/10/2006 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1607.388 MHz processor [ 0.008073] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.008076] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.014417] AGP: No AGP bridge found [ 0.014479] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.014486] MTRR default type: uncachable [ 0.014487] MTRR fixed ranges enabled: [ 0.014490] 00000-9FFFF write-back [ 0.014492] A0000-EFFFF uncachable [ 0.014494] F0000-FFFFF write-protect [ 0.014495] MTRR variable ranges enabled: [ 0.014498] 0 base 0000000000 mask FF80000000 write-back [ 0.014500] 1 base 0080000000 mask FFC0000000 write-back [ 0.014501] 2 disabled [ 0.014503] 3 disabled [ 0.014504] 4 disabled [ 0.014505] 5 disabled [ 0.014505] 6 disabled [ 0.014506] 7 disabled [ 0.014508] TOM2: 0000000180000000 aka 6144M [ 0.014664] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.014734] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.014744] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.022063] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.029346] RAMDISK: [mem 0x31ba5000-0x34dc9fff] [ 0.029363] ACPI: Early table checksum verification disabled [ 0.029788] ACPI: RSDP 0x00000000000FA110 000014 (v00 ACPIAM) [ 0.029794] ACPI: RSDT 0x00000000BFFB0000 000034 (v01 A M I OEMRSDT 08000610 MSFT 00000097) [ 0.029803] ACPI: FACP 0x00000000BFFB0200 000084 (v02 A M I OEMFACP 08000610 MSFT 00000097) [ 0.029812] ACPI: DSDT 0x00000000BFFB0440 004C9E (v01 AM2N6 AM2N6111 00000111 INTL 20051117) [ 0.029817] ACPI: FACS 0x00000000BFFC0000 000040 [ 0.029821] ACPI: APIC 0x00000000BFFB0390 000070 (v01 A M I OEMAPIC 08000610 MSFT 00000097) [ 0.029827] ACPI: MCFG 0x00000000BFFB0400 00003C (v01 A M I OEMMCFG 08000610 MSFT 00000097) [ 0.029832] ACPI: OEMB 0x00000000BFFC0040 000060 (v01 A M I AMI_OEM 08000610 MSFT 00000097) [ 0.029850] ACPI: Local APIC address 0xfee00000 [ 0.030003] Scanning NUMA topology in Northbridge 24 [ 0.030068] No NUMA configuration found [ 0.030069] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.030076] NODE_DATA(0) allocated [mem 0x17fff8000-0x17fffcfff] [ 0.030165] Zone ranges: [ 0.030167] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.030169] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.030171] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.030173] Device empty [ 0.030174] Movable zone start for each node [ 0.030175] Early memory node ranges [ 0.030177] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.030179] node 0: [mem 0x0000000000100000-0x00000000bffaffff] [ 0.030180] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.030196] Zeroed struct page in unavailable ranges: 178 pages [ 0.030198] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.030201] On node 0 totalpages: 1310542 [ 0.030203] DMA zone: 64 pages used for memmap [ 0.030204] DMA zone: 21 pages reserved [ 0.030206] DMA zone: 3998 pages, LIFO batch:0 [ 0.030450] DMA32 zone: 12223 pages used for memmap [ 0.030452] DMA32 zone: 782256 pages, LIFO batch:63 [ 0.087083] Normal zone: 8192 pages used for memmap [ 0.087085] Normal zone: 524288 pages, LIFO batch:63 [ 0.123516] Nvidia board detected. Ignoring ACPI timer override. [ 0.123518] If you got timer trouble try acpi_use_timer_override [ 0.123646] Detected use of extended apic ids on hypertransport bus [ 0.123661] ACPI: PM-Timer IO Port: 0x4008 [ 0.123664] ACPI: Local APIC address 0xfee00000 [ 0.123686] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.123689] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.123690] ACPI: BIOS IRQ0 override ignored. [ 0.123692] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.123695] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.123696] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.123700] ACPI: IRQ9 used by override. [ 0.123701] ACPI: IRQ14 used by override. [ 0.123702] ACPI: IRQ15 used by override. [ 0.123705] Using ACPI (MADT) for SMP configuration information [ 0.123709] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.123735] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.123738] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.123739] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.123741] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.123743] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbffff] [ 0.123744] PM: Registered nosave memory: [mem 0xbffc0000-0xbffeffff] [ 0.123746] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff] [ 0.123747] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff] [ 0.123748] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.123750] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.123751] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.123752] PM: Registered nosave memory: [mem 0xfef00000-0xff37ffff] [ 0.123753] PM: Registered nosave memory: [mem 0xff380000-0xffffffff] [ 0.123757] [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.123758] Booting paravirtualized kernel on bare hardware [ 0.123763] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.361941] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0 [ 0.361953] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.364407] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u1048576 [ 0.364418] pcpu-alloc: s144408 r8192 d31720 u1048576 alloc=1*2097152 [ 0.364420] pcpu-alloc: [0] 0 1 [ 0.364457] Built 1 zonelists, mobility grouping on. Total pages: 1290042 [ 0.364458] Policy zone: Normal [ 0.364462] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=HASH_615-4023-5643-5D93-EB8E35DAEF01 ro quiet splash resume=UUID=HASH_E14-76C1-6594-38BA-BD9D3D070449 [ 0.434639] AGP: Checking aperture... [ 0.440973] AGP: No AGP bridge found [ 0.440978] AGP: Node 0: aperture [bus addr 0xf0e8000000-0xf0e9ffffff] (32MB) [ 0.440979] Aperture beyond 4GB. Ignoring. [ 0.440980] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.440981] AGP: Please enable the IOMMU option in the BIOS setup [ 0.440982] AGP: This costs you 64MB of RAM [ 0.440987] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.440991] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.522551] Memory: 4952168K/5242168K available (10252K kernel code, 1247K rwdata, 3312K rodata, 1596K init, 2264K bss, 290000K reserved, 0K cma-reserved) [ 0.522804] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.522821] ftrace: allocating 31917 entries in 125 pages [ 0.549834] rcu: Hierarchical RCU implementation. [ 0.549838] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.549840] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.557631] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 [ 0.558011] spurious 8259A interrupt: IRQ7. [ 0.562970] Console: colour VGA+ 80x25 [ 0.562980] console [tty0] enabled [ 0.563030] ACPI: Core revision 20180810 [ 0.563197] APIC: Switch to symmetric I/O mode setup [ 0.563848] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.583194] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.583218] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.77 BogoMIPS (lpj=6429552) [ 0.583222] pid_max: default: 32768 minimum: 301 [ 0.583294] Security Framework initialized [ 0.583297] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.583337] AppArmor: AppArmor initialized [ 0.590337] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.593827] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.593972] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.594083] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.594554] LVT offset 0 assigned for vector 0xf9 [ 0.594559] process: using AMD E400 aware idle routine [ 0.594562] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.594563] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.594566] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.594569] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.594618] Spectre V2 : Mitigation: Full generic retpoline [ 0.594619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.716115] smpboot: CPU0: AMD Sempron(tm) Processor 3000+ (family: 0xf, model: 0x4f, stepping: 0x2) [ 0.716384] Performance Events: AMD PMU driver. [ 0.716392] ... version: 0 [ 0.716393] ... bit width: 48 [ 0.716394] ... generic registers: 4 [ 0.716395] ... value mask: 0000ffffffffffff [ 0.716396] ... max period: 00007fffffffffff [ 0.716397] ... fixed-purpose events: 0 [ 0.716398] ... event mask: 000000000000000f [ 0.716502] rcu: Hierarchical SRCU implementation. [ 0.717220] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.717300] smp: Bringing up secondary CPUs ... [ 0.717303] smp: Brought up 1 node, 1 CPU [ 0.717304] smpboot: Max logical packages: 2 [ 0.717307] smpboot: Total of 1 processors activated (3214.77 BogoMIPS) [ 0.718236] devtmpfs: initialized [ 0.718360] x86/mm: Memory block size: 128MB [ 0.719196] PM: Registering ACPI NVS region [mem 0xbffc0000-0xbffeffff] (196608 bytes) [ 0.719196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.719196] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.719196] pinctrl core: initialized pinctrl subsystem [ 0.719337] NET: Registered protocol family 16 [ 0.719835] cpuidle: using governor ladder [ 0.719837] cpuidle: using governor menu [ 0.719845] node 0 link 0: io port [1000, ffffff] [ 0.719847] TOM: 00000000c0000000 aka 3072M [ 0.719850] node 0 link 0: mmio [e0000000, efffffff] [ 0.719853] node 0 link 0: mmio [a0000, bffff] [ 0.719855] node 0 link 0: mmio [c0000000, fe0bffff] [ 0.719857] TOM2: 0000000180000000 aka 6144M [ 0.719859] bus: [bus 00-ff] on node 0 link 0 [ 0.719861] bus: 00 [io 0x0000-0xffff] [ 0.719862] bus: 00 [mem 0xc0000000-0xffffffff] [ 0.719863] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.719864] bus: 00 [mem 0x180000000-0xfcffffffff] [ 0.719928] ACPI: bus type PCI registered [ 0.719930] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.720068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.720072] PCI: not using MMCONFIG [ 0.720073] PCI: Using configuration type 1 for base access [ 0.721919] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.722449] ACPI: Added _OSI(Module Device) [ 0.722451] ACPI: Added _OSI(Processor Device) [ 0.722452] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.722453] ACPI: Added _OSI(Processor Aggregator Device) [ 0.722454] ACPI: Added _OSI(Linux-Dell-Video) [ 0.722456] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.726645] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.729006] ACPI: Interpreter enabled [ 0.729042] ACPI: (supports S0 S1 S4 S5) [ 0.729044] ACPI: Using IOAPIC for interrupt routing [ 0.729096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.730532] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.730564] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.731040] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.742486] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.742495] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.742721] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.742928] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.743276] PCI host bridge to bus 0000:00 [ 0.743280] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.743282] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.743285] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.743287] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.743289] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xff37ffff window] [ 0.743292] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.743314] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000 [ 0.743589] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100 [ 0.743727] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.743741] pci 0000:00:01.1: reg 0x10: [io 0xdc00-0xdc3f] [ 0.743758] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f] [ 0.743764] pci 0000:00:01.1: reg 0x24: [io 0x6000-0x603f] [ 0.743795] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.743908] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.744030] pci 0000:00:01.3: [10de:03f4] type 00 class 0x0b4000 [ 0.744052] pci 0000:00:01.3: reg 0x10: [mem 0x00000000-0x0007ffff] [ 0.744223] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.744236] pci 0000:00:02.0: reg 0x10: [mem 0xdeeff000-0xdeefffff] [ 0.744277] pci 0000:00:02.0: supports D1 D2 [ 0.744279] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.744385] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.744398] pci 0000:00:02.1: reg 0x10: [mem 0xdeefec00-0xdeefecff] [ 0.744445] pci 0000:00:02.1: supports D1 D2 [ 0.744447] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.744571] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.744712] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.744725] pci 0000:00:05.0: reg 0x10: [mem 0xdeef8000-0xdeefbfff] [ 0.744773] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.744888] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.744914] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf] [ 0.744925] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.744927] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.744929] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.744931] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.745045] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.745057] pci 0000:00:07.0: reg 0x10: [mem 0xdeefd000-0xdeefdfff] [ 0.745062] pci 0000:00:07.0: reg 0x14: [io 0xd480-0xd487] [ 0.745102] pci 0000:00:07.0: supports D1 D2 [ 0.745104] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.745216] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.745227] pci 0000:00:08.0: reg 0x10: [io 0xd400-0xd407] [ 0.745232] pci 0000:00:08.0: reg 0x14: [io 0xd080-0xd083] [ 0.745236] pci 0000:00:08.0: reg 0x18: [io 0xd000-0xd007] [ 0.745241] pci 0000:00:08.0: reg 0x1c: [io 0xcc00-0xcc03] [ 0.745246] pci 0000:00:08.0: reg 0x20: [io 0xc880-0xc88f] [ 0.745251] pci 0000:00:08.0: reg 0x24: [mem 0xdeefc000-0xdeefcfff] [ 0.745381] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.745426] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.745542] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.745582] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.745698] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.745737] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.745862] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.745968] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.746071] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.746171] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.746295] pci_bus 0000:01: extended config space not accessible [ 0.746358] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.746364] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.746367] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.746369] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.746371] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.746374] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xff37ffff window] (subtractive decode) [ 0.746439] pci 0000:02:00.0: [10de:11b4] type 00 class 0x030000 [ 0.746458] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 0.746469] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.746480] pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit pref] [ 0.746487] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f] [ 0.746495] pci 0000:02:00.0: reg 0x30: [mem 0xdef80000-0xdeffffff pref] [ 0.746574] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:09.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) [ 0.746648] pci 0000:02:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.746664] pci 0000:02:00.1: reg 0x10: [mem 0xdef7c000-0xdef7ffff] [ 0.746815] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.746819] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.746822] pci 0000:00:09.0: bridge window [mem 0xdef00000-0xdfffffff] [ 0.746825] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xddffffff 64bit pref] [ 0.746883] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.746925] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.748378] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.748511] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.748641] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.748769] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.748897] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.749025] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.749159] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.749287] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.749415] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.749542] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.749670] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 0.749798] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.749926] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 0.750054] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.750182] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.750310] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.750437] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10 [ 0.750565] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.750711] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.750994] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.750998] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.751000] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.751002] vgaarb: loaded [ 0.751124] pps_core: LinuxPPS API ver. 1 registered [ 0.751125] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.751129] PTP clock support registered [ 0.751144] EDAC MC: Ver: 3.0.0 [ 0.751428] PCI: Using ACPI for IRQ routing [ 0.758000] PCI: pci_cache_line_size set to 64 bytes [ 0.758053] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.758056] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff] [ 0.758472] clocksource: Switched to clocksource refined-jiffies [ 0.783320] VFS: Disk quotas dquot_6.6.0 [ 0.783355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.783572] AppArmor: AppArmor Filesystem Enabled [ 0.783617] pnp: PnP ACPI init [ 0.783743] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.784437] pnp 00:01: [dma 3] [ 0.784595] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.785498] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.785501] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.785504] system 00:02: [io 0x4000-0x407f] has been reserved [ 0.785506] system 00:02: [io 0x4080-0x40ff] has been reserved [ 0.785508] system 00:02: [io 0x4400-0x447f] has been reserved [ 0.785511] system 00:02: [io 0x4480-0x44ff] has been reserved [ 0.785513] system 00:02: [io 0x4800-0x487f] has been reserved [ 0.785515] system 00:02: [io 0x4880-0x48ff] has been reserved [ 0.785517] system 00:02: [io 0x2000-0x207f] has been reserved [ 0.785519] system 00:02: [io 0x2080-0x20ff] has been reserved [ 0.785523] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.785525] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.785528] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved [ 0.785531] system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.785534] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.785536] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.785544] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.785702] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.785705] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.785711] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.785789] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.785863] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.786156] pnp 00:06: [dma 0 disabled] [ 0.786246] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.786407] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.786414] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.786540] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.786547] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.786817] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.786820] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.786822] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.786825] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.786827] system 00:09: [mem 0xff380000-0xffffffff] has been reserved [ 0.786833] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.787307] pnp: PnP ACPI: found 10 devices [ 0.794625] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.794644] clocksource: Switched to clocksource acpi_pm [ 0.794684] pci 0000:00:01.3: BAR 0: assigned [mem 0xde000000-0xde07ffff] [ 0.794692] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.794701] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.794703] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.794706] pci 0000:00:09.0: bridge window [mem 0xdef00000-0xdfffffff] [ 0.794709] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xddffffff 64bit pref] [ 0.794712] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.794718] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.794726] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.794728] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.794730] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.794732] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.794734] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xff37ffff window] [ 0.794737] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 0.794739] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 0.794741] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.794743] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.794745] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xff37ffff window] [ 0.794747] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.794749] pci_bus 0000:02: resource 1 [mem 0xdef00000-0xdfffffff] [ 0.794751] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xddffffff 64bit pref] [ 0.794914] NET: Registered protocol family 2 [ 0.795198] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.795198] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.795198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.795198] TCP: Hash tables configured (established 65536 bind 65536) [ 0.795198] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.795198] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.795198] NET: Registered protocol family 1 [ 0.795198] NET: Registered protocol family 44 [ 0.795198] PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.275341] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x6c1 took 470067 usecs [ 1.275624] PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.275793] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.275846] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.275914] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.275974] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.276038] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.276105] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.276175] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.276224] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.276249] pci 0000:02:00.1: Linked as a consumer to 0000:02:00.0 [ 1.276251] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0 [ 1.276263] PCI: CLS 64 bytes, default 64 [ 1.276388] Unpacking initramfs... [ 2.826191] Freeing initrd memory: 51348K [ 2.826697] PCI-DMA: Disabling AGP. [ 2.826797] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 2.826798] PCI-DMA: using GART IOMMU. [ 2.826802] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.832516] Initialise system trusted keyrings [ 2.832536] Key type blacklist registered [ 2.832651] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.835976] zbud: loaded [ 3.197894] Key type asymmetric registered [ 3.197897] Asymmetric key parser 'x509' registered [ 3.197925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.197994] io scheduler noop registered [ 3.197995] io scheduler deadline registered [ 3.198096] io scheduler cfq registered (default) [ 3.198098] io scheduler mq-deadline registered [ 3.198478] pcieport 0000:00:09.0: Signaling PME with IRQ 24 [ 3.198635] pcieport 0000:00:0b.0: Signaling PME with IRQ 25 [ 3.198763] pcieport 0000:00:0c.0: Signaling PME with IRQ 26 [ 3.198835] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.199134] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.219683] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.220383] Linux agpgart interface v0.103 [ 3.220440] AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 3.220441] AMD IOMMUv2 functionality not available on this system [ 3.220658] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.223387] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.223454] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.223638] mousedev: PS/2 mouse device common for all mice [ 3.223723] rtc_cmos 00:00: RTC can wake from S4 [ 3.223934] rtc_cmos 00:00: registered as rtc0 [ 3.223964] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 3.223999] ledtrig-cpu: registered to indicate activity on CPUs [ 3.224745] NET: Registered protocol family 10 [ 3.243297] Segment Routing with IPv6 [ 3.243341] mip6: Mobile IPv6 [ 3.243345] NET: Registered protocol family 17 [ 3.243431] mpls_gso: MPLS GSO support [ 3.243581] mce: Using 5 MCE banks [ 3.243827] registered taskstats version 1 [ 3.243828] Loading compiled-in X.509 certificates [ 3.247838] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.327036] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.327072] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 3.327120] zswap: loaded using pool lzo/zbud [ 3.327226] AppArmor: AppArmor sha1 policy hashing enabled [ 3.327839] rtc_cmos 00:00: setting system clock to 2020-11-23 02:11:49 UTC (1606097509) [ 3.327903] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 3.332095] Freeing unused kernel image memory: 1596K [ 3.343221] Write protecting the kernel read-only data: 16384k [ 3.345151] Freeing unused kernel image memory: 2028K [ 3.345804] Freeing unused kernel image memory: 784K [ 3.366077] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.366080] Run /init as init process [ 3.742775] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.742802] ACPI: Power Button [PWRB] [ 3.744442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.744482] ACPI: Power Button [PWRF] [ 3.808908] i2c i2c-0: nForce2 SMBus adapter at 0x5000 [ 3.808948] i2c i2c-1: nForce2 SMBus adapter at 0x6000 [ 3.879421] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.879779] PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 3.879879] forcedeth 0000:00:07.0: Invalid MAC address detected: XX:XX:XX:XX:XX:XX - Please complain to your hardware vendor. [ 3.879935] forcedeth 0000:00:07.0: Using random MAC address: XX:XX:XX:XX:XX:XX [ 3.948942] SCSI subsystem initialized [ 3.988886] ACPI: bus type USB registered [ 3.988927] usbcore: registered new interface driver usbfs [ 3.988944] usbcore: registered new interface driver hub [ 4.000001] usbcore: registered new device driver usb [ 4.014369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.049303] ehci-pci: EHCI PCI platform driver [ 4.049577] ehci-pci 0000:00:02.1: EHCI Host Controller [ 4.049588] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.049601] ehci-pci 0000:00:02.1: debug port 1 [ 4.049654] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 4.049687] ehci-pci 0000:00:02.1: irq 22, io mem 0xdeefec00 [ 4.053034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.063257] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.063395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 4.063398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.063400] usb usb1: Product: EHCI Host Controller [ 4.063402] usb usb1: Manufacturer: Linux 4.19.0-12-amd64 ehci_hcd [ 4.063404] usb usb1: SerialNumber: ... [ 4.063645] hub 1-0:1.0: USB hub found [ 4.063658] hub 1-0:1.0: 8 ports detected [ 4.065794] ohci-pci: OHCI PCI platform driver [ 4.066039] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 4.066052] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.066121] ohci-pci 0000:00:02.0: irq 23, io mem 0xdeeff000 [ 4.078510] libata version 3.00 loaded. [ 4.084905] pata_amd 0000:00:06.0: version 0.4.1 [ 4.088085] scsi host0: pata_amd [ 4.088881] sata_nv 0000:00:08.0: version 3.5 [ 4.089225] PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 4.090546] scsi host1: pata_amd [ 4.090678] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.090680] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.093719] scsi host2: sata_nv [ 4.094210] scsi host3: sata_nv [ 4.094341] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20 [ 4.094343] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20 [ 4.125288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 4.125292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.125294] usb usb2: Product: OHCI PCI host controller [ 4.125295] usb usb2: Manufacturer: Linux 4.19.0-12-amd64 ohci_hcd [ 4.125297] usb usb2: SerialNumber: ... [ 4.125811] hub 2-0:1.0: USB hub found [ 4.125827] hub 2-0:1.0: 8 ports detected [ 4.253879] ata1.00: ATA-6: WDC WD800BB-22JHC0, 05.01C05, max UDMA/100 [ 4.253884] ata1.00: 156301488 sectors, multi 16: LBA [ 4.253894] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11) [ 4.256725] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-22JH 1C05 PQ: 0 ANSI: 5 [ 4.257029] ata2: port disabled--ignoring [ 4.265004] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.265019] sd 0:0:0:0: [sda] Write Protect is off [ 4.265022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.265042] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.299374] sda: sda1 sda2 [ 4.299951] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.399218] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.427988] ata3: SATA link down (SStatus 0 SControl 300) [ 4.428831] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr XX:XX:XX:XX:XX:XX [ 4.428835] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 4.431083] forcedeth 0000:00:07.0 enp0s7: renamed from eth0 [ 4.556092] usb 1-1: New USB device found, idVendor=1e3d, idProduct=2092, bcdDevice= 1.00 [ 4.556096] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.556098] usb 1-1: Product: Flash Disk [ 4.556100] usb 1-1: Manufacturer: CBM [ 4.556101] usb 1-1: SerialNumber: ... [ 4.565988] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.566197] scsi host4: usb-storage 1-1:1.0 [ 4.566376] usbcore: registered new interface driver usb-storage [ 4.570998] usbcore: registered new interface driver uas [ 4.899258] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.901552] ata4.00: ATA-7: Maxtor 6V080E0, VA111630, max UDMA/100 [ 4.901555] ata4.00: 156301488 sectors, multi 16: LBA48 [ 4.906031] ata4.00: configured for UDMA/100 [ 4.906224] scsi 3:0:0:0: Direct-Access ATA Maxtor 6V080E0 1630 PQ: 0 ANSI: 5 [ 4.906589] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.906604] sd 3:0:0:0: [sdb] Write Protect is off [ 4.906606] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.906628] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.943229] usb 2-2: new low-speed USB device number 2 using ohci-pci [ 4.959870] sdb: sdb1 [ 4.960419] sd 3:0:0:0: [sdb] Attached SCSI disk [ 5.011759] random: fast init done [ 5.032535] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.139245] usb 2-2: device descriptor read/64, error -62 [ 5.443222] usb 2-2: device descriptor read/64, error -62 [ 5.443271] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 5.587874] scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2 [ 5.589410] sd 4:0:0:0: [sdc] 4149248 512-byte logical blocks: (2.12 GB/1.98 GiB) [ 5.590124] sd 4:0:0:0: [sdc] Write Protect is off [ 5.590128] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 5.591255] sd 4:0:0:0: [sdc] No Caching mode page found [ 5.591302] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 5.594863] sdc: sdc1 [ 5.599120] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 5.601343] usb 1-4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [ 5.601360] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.601362] usb 1-4: Product: DataTraveler 3.0 [ 5.601364] usb 1-4: Manufacturer: Kingston [ 5.601366] usb 1-4: SerialNumber: ... [ 5.602155] usb-storage 1-4:1.0: USB Mass Storage device detected [ 5.602681] scsi host5: usb-storage 1-4:1.0 [ 5.731235] usb 1-6: new high-speed USB device number 5 using ehci-pci [ 5.739239] usb 2-2: new low-speed USB device number 3 using ohci-pci [ 5.889995] usb 1-6: New USB device found, idVendor=058f, idProduct=6362, bcdDevice= 1.29 [ 5.890000] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.890002] usb 1-6: Product: Mass Storage Device [ 5.890004] usb 1-6: Manufacturer: Generic [ 5.890005] usb 1-6: SerialNumber: ... [ 5.890882] usb-storage 1-6:1.0: USB Mass Storage device detected [ 5.895305] scsi host6: usb-storage 1-6:1.0 [ 5.983248] raid6: sse2x1 gen() 1965 MB/s [ 6.051213] raid6: sse2x1 xor() 1833 MB/s [ 6.119225] raid6: sse2x2 gen() 2448 MB/s [ 6.187212] raid6: sse2x2 xor() 2059 MB/s [ 6.255219] raid6: sse2x4 gen() 2667 MB/s [ 6.323220] raid6: sse2x4 xor() 1497 MB/s [ 6.323222] raid6: using algorithm sse2x4 gen() 2667 MB/s [ 6.323223] raid6: .... xor() 1497 MB/s, rmw enabled [ 6.323224] raid6: using intx1 recovery algorithm [ 6.323258] usb 2-2: device descriptor read/64, error -62 [ 6.342850] xor: measuring software checksum speed [ 6.379209] prefetch64-sse: 4562.000 MB/sec [ 6.419207] generic_sse: 4556.000 MB/sec [ 6.419208] xor: using function: prefetch64-sse (4562.000 MB/sec) [ 6.549276] Btrfs loaded, crc32c=crc32c-generic [ 6.612248] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 6.614822] sd 5:0:0:0: [sdd] 121061376 512-byte logical blocks: (62.0 GB/57.7 GiB) [ 6.616002] sd 5:0:0:0: [sdd] Write Protect is off [ 6.616006] sd 5:0:0:0: [sdd] Mode Sense: 45 00 00 00 [ 6.616842] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.699329] usb 2-2: device descriptor read/64, error -62 [ 6.708770] sdd: sdd1 [ 6.714746] sd 5:0:0:0: [sdd] Attached SCSI removable disk [ 6.807293] usb usb2-port2: attempt power cycle [ 6.900122] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.900736] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.901356] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.901979] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.907770] sd 6:0:0:1: [sdf] Attached SCSI removable disk [ 6.908664] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 6.912504] sd 6:0:0:2: [sdg] Attached SCSI removable disk [ 6.916115] sd 6:0:0:3: [sdh] Attached SCSI removable disk [ 7.311229] usb 2-2: new low-speed USB device number 4 using ohci-pci [ 7.727223] usb 2-2: device not accepting address 4, error -62 [ 7.915217] usb 2-2: new low-speed USB device number 5 using ohci-pci [ 8.331232] usb 2-2: device not accepting address 5, error -62 [ 8.331305] usb usb2-port2: unable to enumerate USB device [ 9.128473] random: crng init done [ 36.745676] cryptd: max_cpu_qlen set to 1000 [ 36.900565] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 39.132709] systemd[1]: Inserted module 'autofs4' [ 39.375294] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 39.375520] systemd[1]: Detected architecture x86-64. [ 39.394223] systemd[1]: Set hostname to ... [ 41.470514] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 41.570102] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 41.690738] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update the unit file accordingly. [ 42.068798] systemd[1]: Reached target User and Group Name Lookups. [ 42.069461] systemd[1]: Listening on Journal Audit Socket. [ 42.069788] systemd[1]: Listening on udev Control Socket. [ 42.071516] systemd[1]: Created slice system-getty.slice. [ 42.611278] EXT4-fs (sda1): re-mounted. Opts: (null) [ 42.848162] lp: driver loaded but no devices found [ 42.967556] ppdev: user-space parallel port driver [ 43.042729] parport_pc 00:01: reported by Plug and Play ACPI [ 43.042816] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 43.139436] lp0: using parport0 (interrupt-driven). [ 43.386247] w83627ehf: Found W83627EHG chip at 0x290 [ 43.386638] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 43.459729] systemd-journald[330]: Received request to flush runtime journal from PID 1 [ 43.595598] version 39.2 [ 43.631714] ipmi device interface [ 44.083318] loop: module loaded [ 44.497911] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 44.497985] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 44.511935] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 44.606537] ISO 9660 Extensions: RRIP_1991A [ 44.613446] ISO 9660 Extensions: RRIP_1991A [ 44.616862] ISO 9660 Extensions: RRIP_1991A [ 46.204540] nvidia: loading out-of-tree module taints kernel. [ 46.204577] nvidia: module license 'NVIDIA' taints kernel. [ 46.204578] Disabling lock debugging due to kernel taint [ 46.246668] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 46.274207] nvidia-nvlink: Nvlink Core is being initialized, major device number 245 [ 46.275445] PCI Interrupt Link [LNED] enabled at IRQ 19 [ 46.275501] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 46.725203] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 418.152.00 Tue Jun 2 00:46:46 UTC 2020 [ 47.298808] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 47.298822] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 47.338078] MCE: In-kernel MCE decoding enabled. [ 47.381177] EDAC amd64: Node 0: DRAM ECC disabled. [ 47.381180] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 47.533854] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 47.663961] powernow_k8: Power state transitions not supported [ 48.322442] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 48.323036] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 48.327539] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 48.328200] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 48.328299] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 48.328871] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 48.329437] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 48.329525] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 48.863169] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 418.152.00 Tue Jun 2 00:34:30 UTC 2020 [ 49.313219] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 49.554678] PCI Interrupt Link [LAZA] enabled at IRQ 23 [ 49.554693] snd_hda_intel 0000:00:05.0: Disabling MSI [ 49.555506] PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 49.555549] snd_hda_intel 0000:02:00.1: Disabling MSI [ 49.555565] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 50.661853] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input6 [ 50.661957] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input7 [ 50.662058] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input8 [ 51.553436] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver [ 51.553441] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0 [ 52.107230] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x00000100 [ 52.275234] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line [ 52.275238] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 52.275241] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 52.275243] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 52.275245] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 52.275247] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 52.275250] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 52.275252] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 52.275254] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 52.275256] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c [ 52.275257] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [ 53.233663] Adding 9227464k swap on /dev/sda2. Priority:-2 extents:1 across:9227464k FS [ 55.301620] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 55.304313] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 55.304419] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input11 [ 55.304516] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input12 [ 55.304608] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13 [ 55.304705] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input14 [ 55.304800] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input15 [ 55.304895] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input16 [ 55.308787] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input17 [ 57.572740] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 57.573427] caller _nv000936rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs [ 71.726260] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready [ 71.727009] forcedeth 0000:00:07.0 enp0s7: MSI enabled [ 71.729247] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready [ 71.729264] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready [ 101.642746] forcedeth 0000:00:07.0 enp0s7: link down [ 101.695618] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready [ 103.202625] forcedeth 0000:00:07.0 enp0s7: link up [ 103.202665] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready [ 1304.326152] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 1812.303648] perf: interrupt took too long (3149 > 3127), lowering kernel.perf_event_max_sample_rate to 63500 [ 2651.080580] perf: interrupt took too long (3942 > 3936), lowering kernel.perf_event_max_sample_rate to 50500 [ 4499.441357] perf: interrupt took too long (4928 > 4927), lowering kernel.perf_event_max_sample_rate to 40500 [ 4995.117128] fuse init (API version 7.27) [ 6836.717398] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 6842.315240] usb 2-2: new low-speed USB device number 6 using ohci-pci [ 6842.509958] usb 2-2: device descriptor read/64, error -62 [ 6842.807234] usb 2-2: device descriptor read/64, error -62 [ 6843.103247] usb 2-2: new low-speed USB device number 7 using ohci-pci [ 6843.295269] usb 2-2: device descriptor read/64, error -62 [ 6843.595245] usb 2-2: device descriptor read/64, error -62 [ 6843.703257] usb usb2-port2: attempt power cycle [ 6844.207247] usb 2-2: new low-speed USB device number 8 using ohci-pci [ 6844.623244] usb 2-2: device not accepting address 8, error -62 [ 6844.811245] usb 2-2: new low-speed USB device number 9 using ohci-pci [ 6845.227258] usb 2-2: device not accepting address 9, error -62 [ 6845.227300] usb usb2-port2: unable to enumerate USB device [ 6850.174393] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 6850.332905] Bluetooth: Core ver 2.22 [ 6850.332977] NET: Registered protocol family 31 [ 6850.332978] Bluetooth: HCI device and connection manager initialized [ 6850.337143] Bluetooth: HCI socket layer initialized [ 6850.337149] Bluetooth: L2CAP socket layer initialized [ 6850.337169] Bluetooth: SCO socket layer initialized [ 6895.818735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6895.818738] Bluetooth: BNEP filters: protocol multicast [ 6895.818745] Bluetooth: BNEP socket layer initialized [10624.652303] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [10626.931745] usb 1-4: USB disconnect, device number 4 [10638.735675] usb 1-1: USB disconnect, device number 2 [34118.075390] usb 2-2: new low-speed USB device number 10 using ohci-pci [34118.271525] usb 2-2: device descriptor read/64, error -62 [34118.575583] usb 2-2: device descriptor read/64, error -62 [34118.871341] usb 2-2: new low-speed USB device number 11 using ohci-pci [34119.067966] usb 2-2: device descriptor read/64, error -62 [34119.371261] usb 2-2: device descriptor read/64, error -62 [34119.479335] usb usb2-port2: attempt power cycle [34119.983264] usb 2-2: new low-speed USB device number 12 using ohci-pci [34120.399251] usb 2-2: device not accepting address 12, error -62 [34120.587249] usb 2-2: new low-speed USB device number 13 using ohci-pci [34121.003767] usb 2-2: device not accepting address 13, error -62 [34121.003812] usb usb2-port2: unable to enumerate USB device