[ 0.000000] Linux version 4.18.16-desktop-1bP (XXX@XXX) (gcc version 8.2.1 20180824 (blackPanther 8.2.1-0.20180824.1bP)) #1 SMP Tue Oct 23 22:47:49 CEST 2018 [ 0.000000] Command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD splash quiet noiswmd rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=792 noapic acpi=off [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Studio XPS 7100/0NWWY0, BIOS A06 09/10/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)] [ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1338e2000, 0x1338e2fff] PGTABLE [ 0.000000] BRK [0x1338e3000, 0x1338e3fff] PGTABLE [ 0.000000] BRK [0x1338e4000, 0x1338e4fff] PGTABLE [ 0.000000] BRK [0x1338e5000, 0x1338e5fff] PGTABLE [ 0.000000] BRK [0x1338e6000, 0x1338e6fff] PGTABLE [ 0.000000] BRK [0x1338e7000, 0x1338e7fff] PGTABLE [ 0.000000] BRK [0x1338e8000, 0x1338e8fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7e1d5000-0x7fffffff] [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22fffc000-0x22fffffff] [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cffaffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Reserved but unavailable: 180 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096972 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13247 pages used for memmap [ 0.000000] DMA32 zone: 847792 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: AMD [ 0.000000] MPTABLE: Product ID: RS780 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] Processor #4 [ 0.000000] Processor #5 [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 6 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffbe000-0xcffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xff6fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff] [ 0.000000] [mem 0xd0000000-0xff6fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x51a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s145816 r8192 d30312 u262144 [ 0.000000] pcpu-alloc: s145816 r8192 d30312 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064184 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD splash quiet noiswmd rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=792 noapic acpi=off [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x47c6000000-0x47c7ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8067676K/8387888K available (12300K kernel code, 1346K rwdata, 3672K rodata, 1568K init, 656K bss, 320212K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 34488 entries in 135 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 4352, nr_irqs: 472, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] Not enabling interrupt remapping due to skipped IO-APIC setup [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2693.491 MHz processor [ 0.001000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d33958964, max_idle_ns: 440795202126 ns [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5386.98 BogoMIPS (lpj=2693491) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] Security Framework initialized [ 0.001000] TOMOYO Linux initialized [ 0.003791] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004748] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004786] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004817] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005012] mce: CPU supports 6 MCE banks [ 0.005017] LVT offset 0 assigned for vector 0xf9 [ 0.005020] process: using AMD E400 aware idle routine [ 0.005021] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.005022] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.005024] Spectre V2 : Mitigation: Full AMD retpoline [ 0.005024] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.011273] Freeing SMP alternatives memory: 32K [ 0.011691] process: System has AMD C1E enabled [ 0.113015] process: Switch to broadcast mode on CPU0 [ 0.114002] smpboot: CPU0: AMD Phenom(tm) II X6 1045T Processor (family: 0x10, model: 0xa, stepping: 0x0) [ 0.114120] Performance Events: AMD PMU driver. [ 0.114123] ... version: 0 [ 0.114124] ... bit width: 48 [ 0.114124] ... generic registers: 4 [ 0.114125] ... value mask: 0000ffffffffffff [ 0.114125] ... max period: 00007fffffffffff [ 0.114126] ... fixed-purpose events: 0 [ 0.114126] ... event mask: 000000000000000f [ 0.114168] Hierarchical SRCU implementation. [ 0.114505] MCE: In-kernel MCE decoding enabled. [ 0.114577] smp: Bringing up secondary CPUs ... [ 0.114661] x86: Booting SMP configuration: [ 0.114662] .... node #0, CPUs: #1 [ 0.001000] process: Switch to broadcast mode on CPU1 [ 0.116076] #2 [ 0.001000] process: Switch to broadcast mode on CPU2 [ 0.118079] #3 [ 0.001000] process: Switch to broadcast mode on CPU3 [ 0.120088] #4 [ 0.001000] process: Switch to broadcast mode on CPU4 [ 0.122084] #5 [ 0.001000] process: Switch to broadcast mode on CPU5 [ 0.124038] smp: Brought up 1 node, 6 CPUs [ 0.124038] smpboot: Max logical packages: 1 [ 0.124038] smpboot: Total of 6 processors activated (32321.89 BogoMIPS) [ 0.125516] devtmpfs: initialized [ 0.125516] x86/mm: Memory block size: 128MB [ 0.126662] PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes) [ 0.126662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.127016] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.127100] xor: measuring software checksum speed [ 0.137006] prefetch64-sse: 13392.000 MB/sec [ 0.147005] generic_sse: 12656.000 MB/sec [ 0.147006] xor: using function: prefetch64-sse (13392.000 MB/sec) [ 0.147016] pinctrl core: initialized pinctrl subsystem [ 0.147140] RTC time: 19:58:10, date: 10/10/10 [ 0.147304] NET: Registered protocol family 16 [ 0.147417] cpuidle: using governor ladder [ 0.147417] cpuidle: using governor menu [ 0.147417] node 0 link 0: io port [1000, ffffff] [ 0.147417] TOM: 00000000d0000000 aka 3328M [ 0.147417] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.147417] node 0 link 0: mmio [a0000, bffff] [ 0.147417] node 0 link 0: mmio [d0000000, dfffffff] [ 0.147417] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.147417] node 0 link 0: mmio [f0000000, ffefffff] [ 0.147417] TOM2: 0000000230000000 aka 8960M [ 0.147417] bus: [bus 00-07] on node 0 link 0 [ 0.147417] bus: 00 [io 0x0000-0xffff] [ 0.147417] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.147417] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.147417] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.147417] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.148054] PCI: Using configuration type 1 for base access [ 0.148054] PCI: Using configuration type 1 for extended access [ 0.149198] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.149198] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.154029] random: fast init done [ 0.166032] raid6: sse2x1 gen() 3500 MB/s [ 0.183005] raid6: sse2x1 xor() 3587 MB/s [ 0.200031] raid6: sse2x2 gen() 5625 MB/s [ 0.216010] raid6: sse2x2 xor() 6699 MB/s [ 0.233047] raid6: sse2x4 gen() 6691 MB/s [ 0.251025] raid6: sse2x4 xor() 2730 MB/s [ 0.251030] raid6: using algorithm sse2x4 gen() 6691 MB/s [ 0.251035] raid6: .... xor() 2730 MB/s, rmw enabled [ 0.251036] raid6: using intx1 recovery algorithm [ 0.251091] ACPI: Interpreter disabled. [ 0.251120] vgaarb: loaded [ 0.251171] SCSI subsystem initialized [ 0.251212] libata version 3.00 loaded. [ 0.251212] EDAC MC: Ver: 3.0.0 [ 0.251212] PCI: Probing PCI hardware [ 0.251212] PCI: root bus 00: hardware-probed resources [ 0.251212] PCI: Probing PCI hardware (bus 00) [ 0.251212] PCI host bridge to bus 0000:00 [ 0.251212] pci_bus 0000:00: root bus resource [bus 00-07] [ 0.251212] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.251212] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.251212] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff] [ 0.251212] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.251212] pci_bus 0000:00: root bus resource [mem 0x230000000-0xfcffffffff] [ 0.251212] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.251212] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.251212] pci 0000:00:02.0: enabling Extended Tags [ 0.251223] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.251270] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.251286] pci 0000:00:06.0: enabling Extended Tags [ 0.251306] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.252035] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.252051] pci 0000:00:09.0: enabling Extended Tags [ 0.252070] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.252107] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.252123] pci 0000:00:0a.0: enabling Extended Tags [ 0.252142] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.252190] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.252210] pci 0000:00:11.0: reg 0x10: [io 0xd000-0xd007] [ 0.252219] pci 0000:00:11.0: reg 0x14: [io 0xc000-0xc003] [ 0.252228] pci 0000:00:11.0: reg 0x18: [io 0xb000-0xb007] [ 0.252236] pci 0000:00:11.0: reg 0x1c: [io 0xa000-0xa003] [ 0.252245] pci 0000:00:11.0: reg 0x20: [io 0x9000-0x900f] [ 0.252253] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff] [ 0.252323] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.252341] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff] [ 0.252421] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.252438] pci 0000:00:12.1: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff] [ 0.252528] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.252547] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff] [ 0.252621] pci 0000:00:12.2: supports D1 D2 [ 0.252621] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.252671] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.252687] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff] [ 0.252764] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.252780] pci 0000:00:13.1: reg 0x10: [mem 0xfe6fb000-0xfe6fbfff] [ 0.252861] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.252880] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff] [ 0.252954] pci 0000:00:13.2: supports D1 D2 [ 0.252955] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.252955] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.252955] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.252955] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.252955] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.252955] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.252955] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.252955] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.252955] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.252955] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.252955] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.252955] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.252955] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.252955] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f4000-0xfe6f7fff 64bit] [ 0.252955] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.252955] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.252955] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.252955] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.252955] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fa000-0xfe6fafff] [ 0.252955] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.252955] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.252955] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.252955] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.252955] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.252955] pci 0000:01:00.0: [1002:68d8] type 00 class 0x030000 [ 0.252955] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.252955] pci 0000:01:00.0: reg 0x18: [mem 0xfe7e0000-0xfe7fffff 64bit] [ 0.252955] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.252955] pci 0000:01:00.0: reg 0x30: [mem 0xfe7c0000-0xfe7dffff pref] [ 0.252955] pci 0000:01:00.0: enabling Extended Tags [ 0.252955] pci 0000:01:00.0: supports D1 D2 [ 0.252955] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.252955] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.252956] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300 [ 0.252973] pci 0000:01:00.1: reg 0x10: [mem 0xfe7bc000-0xfe7bffff 64bit] [ 0.253005] pci 0000:01:00.1: enabling Extended Tags [ 0.253040] pci 0000:01:00.1: supports D1 D2 [ 0.253095] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.253098] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.253100] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.253102] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.253138] pci 0000:02:00.0: [14e4:1691] type 00 class 0x020000 [ 0.253166] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit] [ 0.253209] pci 0000:02:00.0: enabling Extended Tags [ 0.253268] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.253347] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.253350] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.253390] pci 0000:03:00.0: [14f1:8852] type 00 class 0x040000 [ 0.253434] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe9fffff 64bit] [ 0.253600] pci 0000:03:00.0: supports D1 D2 [ 0.253601] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.253672] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.253680] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.253683] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.253714] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000 [ 0.253738] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit] [ 0.253824] pci 0000:04:00.0: supports D1 [ 0.253825] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.253872] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.253877] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.253880] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.253891] pci_bus 0000:05: extended config space not accessible [ 0.253945] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.253952] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.253953] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.253954] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.253955] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.253956] pci 0000:00:14.4: bridge window [mem 0x230000000-0xfcffffffff] (subtractive decode) [ 0.254030] pci 0000:00:14.3: default IRQ router [1002:439d] [ 0.254069] PCI: pci_cache_line_size set to 64 bytes [ 0.254122] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.254123] e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff] [ 0.255019] NetLabel: Initializing [ 0.255019] NetLabel: domain hash size = 128 [ 0.255019] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.255019] NetLabel: unlabeled traffic allowed by default [ 0.255160] clocksource: Switched to clocksource tsc-early [ 0.269494] VFS: Disk quotas dquot_6.6.0 [ 0.269508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.269638] pnp: PnP ACPI: disabled [ 0.271107] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.271109] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.271112] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.271114] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.271116] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.271118] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.271121] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.271123] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.271125] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.271127] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.271131] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.271143] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.271144] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.271145] pci_bus 0000:00: resource 6 [mem 0xd0000000-0xdfffffff] [ 0.271146] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff] [ 0.271147] pci_bus 0000:00: resource 8 [mem 0x230000000-0xfcffffffff] [ 0.271149] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.271150] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.271151] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.271152] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.271153] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe9fffff] [ 0.271154] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.271156] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.271157] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff] [ 0.271158] pci_bus 0000:05: resource 6 [mem 0xd0000000-0xdfffffff] [ 0.271159] pci_bus 0000:05: resource 7 [mem 0xf0000000-0xffffffff] [ 0.271160] pci_bus 0000:05: resource 8 [mem 0x230000000-0xfcffffffff] [ 0.271189] NET: Registered protocol family 2 [ 0.271332] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.271366] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.271510] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.271852] TCP: Hash tables configured (established 65536 bind 65536) [ 0.271911] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.271956] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.272037] NET: Registered protocol family 1 [ 0.272042] NET: Registered protocol family 44 [ 0.341650] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c3 took 67935 usecs [ 0.411630] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6c3 took 68315 usecs [ 0.481606] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c3 took 68275 usecs [ 0.551588] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6c3 took 68319 usecs [ 0.621572] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c3 took 68254 usecs [ 0.621628] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.621649] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.621681] PCI: CLS 64 bytes, default 64 [ 0.621820] Trying to unpack rootfs image as initramfs... [ 5.436106] Freeing initrd memory: 30892K [ 5.436506] PCI-DMA: Disabling AGP. [ 5.436602] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 5.436602] PCI-DMA: using GART IOMMU. [ 5.436604] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 5.439609] LVT offset 1 assigned for vector 0x400 [ 5.439618] LVT offset 1 assigned [ 5.439765] perf: AMD IBS detected (0x0000001f) [ 5.439809] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 5.440424] Initialise system trusted keyrings [ 5.440519] workingset: timestamp_bits=56 max_order=21 bucket_order=0 [ 5.442174] zbud: loaded [ 5.442902] pstore: using deflate compression [ 5.443985] Key type asymmetric registered [ 5.443986] Asymmetric key parser 'x509' registered [ 5.444006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 5.444082] io scheduler noop registered [ 5.444083] io scheduler deadline registered [ 5.444120] io scheduler cfq registered (default) [ 5.444121] io scheduler mq-deadline registered [ 5.444122] io scheduler kyber registered [ 5.444156] io scheduler bfq registered [ 5.444656] pcieport 0000:00:02.0: Signaling PME with IRQ 24 [ 5.444677] pcieport 0000:00:06.0: Signaling PME with IRQ 25 [ 5.444688] pcieport 0000:00:09.0: Signaling PME with IRQ 26 [ 5.444698] pcieport 0000:00:0a.0: Signaling PME with IRQ 27 [ 5.444821] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.445077] Linux agpgart interface v0.103 [ 5.447256] brd: module loaded [ 5.447615] ahci 0000:00:11.0: version 3.0 [ 5.447746] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 5.447749] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 5.448260] scsi host0: ahci [ 5.448395] scsi host1: ahci [ 5.448476] scsi host2: ahci [ 5.448550] scsi host3: ahci [ 5.448618] scsi host4: ahci [ 5.448695] scsi host5: ahci [ 5.448725] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 7 [ 5.448727] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 7 [ 5.448729] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 7 [ 5.448731] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 7 [ 5.448732] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 7 [ 5.448734] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 7 [ 5.448829] i8042: PNP: No PS/2 controller found. [ 5.448830] i8042: Probing ports directly. [ 5.449218] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.449222] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.449409] mousedev: PS/2 mouse device common for all mice [ 5.449662] rtc_cmos rtc_cmos: registered as rtc0 [ 5.449676] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 5.449804] ledtrig-cpu: registered to indicate activity on CPUs [ 5.449980] Key type dns_resolver registered [ 5.449981] mpls_gso: MPLS GSO support [ 5.450376] microcode: microcode updated early to new patch_level=0x010000dc [ 5.450396] microcode: CPU0: patch_level=0x010000dc [ 5.450403] microcode: CPU1: patch_level=0x010000dc [ 5.450410] microcode: CPU2: patch_level=0x010000dc [ 5.450416] microcode: CPU3: patch_level=0x010000dc [ 5.450422] microcode: CPU4: patch_level=0x010000dc [ 5.450431] microcode: CPU5: patch_level=0x010000dc [ 5.450464] microcode: Microcode Update Driver: v2.2. [ 5.450472] sched_clock: Marking stable (5450460131, 0)->(5562021145, -111561014) [ 5.450639] registered taskstats version 1 [ 5.450639] Loading compiled-in X.509 certificates [ 5.450678] zswap: loaded using pool lzo/zbud [ 5.451154] Btrfs loaded, crc32c=crc32c-generic [ 5.453138] Key type encrypted registered [ 5.453523] Magic number: 14:234:1001 [ 5.453577] memory memory40: hash matches [ 5.453629] rtc_cmos rtc_cmos: setting system clock to 2010-10-10 19:58:15 UTC (1286740695) [ 5.453678] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 5.757334] ata4: SATA link down (SStatus 0 SControl 300) [ 5.757377] ata5: SATA link down (SStatus 0 SControl 300) [ 5.757422] ata6: SATA link down (SStatus 0 SControl 300) [ 5.919284] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.919324] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.921162] ata3.00: ATAPI: PLDS DVDRW/BDROM DH-6E2S, 0D13, max UDMA/100 [ 5.922295] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100 [ 5.925765] ata3.00: configured for UDMA/100 [ 5.926013] ata2.00: configured for UDMA/100 [ 6.175234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.198820] ata1.00: ATA-8: WDC WD5000AADS-00M2B0, 01.00A01, max UDMA/133 [ 6.198822] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 6.199957] ata1.00: configured for UDMA/133 [ 6.200228] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 0A01 PQ: 0 ANSI: 5 [ 6.200492] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 6.200528] sd 0:0:0:0: [sda] Write Protect is off [ 6.200531] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.200557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.203830] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH50N B103 PQ: 0 ANSI: 5 [ 6.229532] scsi 2:0:0:0: CD-ROM PLDS DVDRWBD DH-6E2S 0D13 PQ: 0 ANSI: 5 [ 6.241810] sda: [ 6.242023] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.578515] Freeing unused kernel image memory: 1568K [ 6.578531] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d33958964, max_idle_ns: 440795202126 ns [ 6.578584] clocksource: Switched to clocksource tsc [ 6.580136] Write protecting the kernel read-only data: 18432k [ 6.581720] Freeing unused kernel image memory: 2016K [ 6.581909] Freeing unused kernel image memory: 424K [ 6.640980] dracut: dracut-046 [ 6.674710] loop: module loaded [ 6.676884] dracut: root was blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD, is now blackPanther:/dev/disk/by-label/blackPantherOS-18.1-KDE-LiveCD [ 6.828210] [drm] radeon kernel modesetting enabled. [ 6.828573] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1028:0x68E0 0x00). [ 6.829219] ATOM BIOS: REDWOOD [ 6.829273] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 6.829275] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 6.829277] [drm] Detected VRAM RAM=1024M, BAR=256M [ 6.829277] [drm] RAM width 128bits DDR [ 6.829366] [TTM] Zone kernel: Available graphics memory: 4084280 kiB [ 6.829367] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.829368] [TTM] Initializing pool allocator [ 6.829373] [TTM] Initializing DMA pool allocator [ 6.829389] [drm] radeon: 1024M of VRAM memory ready [ 6.829390] [drm] radeon: 1024M of GTT memory ready. [ 6.829395] [drm] Loading REDWOOD Microcode [ 6.829474] [drm] Internal thermal controller with fan control [ 6.848711] [drm] radeon: dpm initialized [ 6.848772] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 6.849729] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 6.865102] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 6.865180] radeon 0000:01:00.0: WB enabled [ 6.865182] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____) [ 6.865183] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____) [ 6.865551] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____) [ 6.865553] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.865554] [drm] Driver supports precise vblank timestamp query. [ 6.865555] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 6.865595] radeon 0000:01:00.0: radeon: using MSI. [ 6.865614] [drm] radeon: irq initialized. [ 6.881772] [drm] ring test on 0 succeeded in 1 usecs [ 6.881776] [drm] ring test on 3 succeeded in 2 usecs [ 7.078925] [drm] ring test on 5 succeeded in 1 usecs [ 7.078929] [drm] UVD initialized successfully. [ 7.079046] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.079084] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.752151] [drm] ib test on ring 5 succeeded [ 7.752635] [drm] Radeon Display Connectors [ 7.752636] [drm] Connector 0: [ 7.752636] [drm] HDMI-A-1 [ 7.752636] [drm] HPD5 [ 7.752638] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 7.752638] [drm] Encoders: [ 7.752639] [drm] DFP1: INTERNAL_UNIPHY2 [ 7.752639] [drm] Connector 1: [ 7.752639] [drm] DVI-I-1 [ 7.752640] [drm] HPD1 [ 7.752641] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 7.752641] [drm] Encoders: [ 7.752642] [drm] DFP2: INTERNAL_UNIPHY1 [ 7.752642] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.752643] [drm] Connector 2: [ 7.752643] [drm] VGA-1 [ 7.752644] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 7.752644] [drm] Encoders: [ 7.752645] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 7.801056] [drm] fb mappable at 0xD034D000 [ 7.801057] [drm] vram apper at 0xD0000000 [ 7.801057] [drm] size 8294400 [ 7.801058] [drm] fb depth is 24 [ 7.801058] [drm] pitch is 7680 [ 7.801130] fbcon: radeondrmfb (fb0) is primary device [ 7.815348] Console: switching to colour frame buffer device 240x67 [ 7.821078] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 7.843084] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 7.849103] dracut: Starting plymouth daemon [ 7.960021] scsi host6: pata_atiixp [ 7.965022] scsi host7: pata_atiixp [ 7.965075] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 7.965076] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 7.971836] usbcore: registered new interface driver usbfs [ 7.971849] usbcore: registered new interface driver hub [ 7.971894] usbcore: registered new device driver usb [ 7.974947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.979956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.979957] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 7.980748] ehci-pci: EHCI PCI platform driver [ 7.980822] ehci-pci 0000:00:12.2: EHCI Host Controller [ 7.980831] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 7.980836] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.980846] ehci-pci 0000:00:12.2: debug port 1 [ 7.980882] ehci-pci 0000:00:12.2: irq 11, io mem 0xfe6ff800 [ 7.981768] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.981770] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.981914] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.987026] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 7.987107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 7.987108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 7.987110] usb usb1: Product: EHCI Host Controller [ 7.987111] usb usb1: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 7.987112] usb usb1: SerialNumber: ... [ 7.987230] hub 1-0:1.0: USB hub found [ 7.987236] hub 1-0:1.0: 6 ports detected [ 7.987706] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.987714] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 7.987725] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.987734] ehci-pci 0000:00:13.2: debug port 1 [ 7.987767] ehci-pci 0000:00:13.2: irq 10, io mem 0xfe6ff400 [ 7.995113] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 7.995230] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 7.995231] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 7.995232] usb usb2: Product: EHCI Host Controller [ 7.995233] usb usb2: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 7.995234] usb usb2: SerialNumber: ... [ 7.995332] hub 2-0:1.0: USB hub found [ 7.995336] hub 2-0:1.0: 6 ports detected [ 7.996220] ohci-pci: OHCI PCI platform driver [ 7.996256] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 7.996260] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 7.996283] ohci-pci 0000:00:12.0: irq 4, io mem 0xfe6fe000 [ 8.052203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 8.052205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.052206] usb usb3: Product: OHCI PCI host controller [ 8.052206] usb usb3: Manufacturer: Linux 4.18.16-desktop-1bP ohci_hcd [ 8.052207] usb usb3: SerialNumber: ... [ 8.052321] hub 3-0:1.0: USB hub found [ 8.052336] hub 3-0:1.0: 3 ports detected [ 8.052552] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 8.052557] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 8.052584] ohci-pci 0000:00:12.1: irq 4, io mem 0xfe6fd000 [ 8.061418] sr 2:0:0:0: [sr1] scsi-1 drive [ 8.061566] sr 2:0:0:0: Attached scsi CD-ROM sr1 [ 8.108204] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 8.108206] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.108207] usb usb4: Product: OHCI PCI host controller [ 8.108208] usb usb4: Manufacturer: Linux 4.18.16-desktop-1bP ohci_hcd [ 8.108208] usb usb4: SerialNumber: ... [ 8.108322] hub 4-0:1.0: USB hub found [ 8.108336] hub 4-0:1.0: 3 ports detected [ 8.108546] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 8.108551] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 8.108571] ohci-pci 0000:00:13.0: irq 10, io mem 0xfe6fc000 [ 8.164210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 8.164212] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.164213] usb usb5: Product: OHCI PCI host controller [ 8.164213] usb usb5: Manufacturer: Linux 4.18.16-desktop-1bP ohci_hcd [ 8.164214] usb usb5: SerialNumber: ... [ 8.164352] hub 5-0:1.0: USB hub found [ 8.164364] hub 5-0:1.0: 3 ports detected [ 8.164562] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 8.164567] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 8.164587] ohci-pci 0000:00:13.1: irq 10, io mem 0xfe6fb000 [ 8.220214] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 8.220216] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.220217] usb usb6: Product: OHCI PCI host controller [ 8.220218] usb usb6: Manufacturer: Linux 4.18.16-desktop-1bP ohci_hcd [ 8.220219] usb usb6: SerialNumber: ... [ 8.220350] hub 6-0:1.0: USB hub found [ 8.220361] hub 6-0:1.0: 3 ports detected [ 8.220570] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 8.220575] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 8.220596] ohci-pci 0000:00:14.5: irq 10, io mem 0xfe6fa000 [ 8.276221] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 8.276223] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.276224] usb usb7: Product: OHCI PCI host controller [ 8.276225] usb usb7: Manufacturer: Linux 4.18.16-desktop-1bP ohci_hcd [ 8.276226] usb usb7: SerialNumber: ... [ 8.276332] hub 7-0:1.0: USB hub found [ 8.276340] hub 7-0:1.0: 2 ports detected [ 8.306128] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 8.331951] random: crng init done [ 8.458114] usb 1-1: device descriptor read/64, error -71 [ 8.520129] usb 5-2: new low-speed USB device number 2 using ohci-pci [ 8.684162] usb 5-2: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00 [ 8.684168] usb 5-2: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 8.684172] usb 5-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 8.684175] usb 5-2: Manufacturer: Microsoft [ 8.692076] hidraw: raw HID events driver (C) Jiri Kosina [ 8.699478] usbcore: registered new interface driver usbhid [ 8.699479] usbhid: USB HID core driver [ 8.700447] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:045E:0040.0001/input/input2 [ 8.700566] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0 [ 8.704138] usb 1-1: device descriptor read/64, error -71 [ 8.947128] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 9.058129] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 9.091122] usb 1-1: device descriptor read/64, error -71 [ 9.188686] usb 2-4: New USB device found, idVendor=18e3, idProduct=9106, bcdDevice= 1.00 [ 9.188692] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.188696] usb 2-4: Product: Mass Storage Device [ 9.188700] usb 2-4: Manufacturer: Generic [ 9.188703] usb 2-4: SerialNumber: ... [ 9.193801] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9.193949] scsi host8: usb-storage 2-4:1.0 [ 9.194025] usbcore: registered new interface driver usb-storage [ 9.195381] usbcore: registered new interface driver uas [ 9.342123] usb 1-1: device descriptor read/64, error -71 [ 9.448153] usb usb1-port1: attempt power cycle [ 9.552122] usb 6-3: new full-speed USB device number 2 using ohci-pci [ 9.721196] usb 6-3: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 9.721202] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.721206] usb 6-3: Product: BCM2046B1 [ 9.721209] usb 6-3: Manufacturer: Broadcom [ 9.723256] hub 6-3:1.0: USB hub found [ 9.725135] hub 6-3:1.0: 3 ports detected [ 9.874129] usb 1-1: new high-speed USB device number 4 using ehci-pci [ 10.022125] usb 6-3.1: new full-speed USB device number 3 using ohci-pci [ 10.118162] usb 6-3.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 10.118168] usb 6-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.125442] input: HID 413c:8161 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3.1/6-3.1:1.0/0003:413C:8161.0002/input/input3 [ 10.177283] hid-generic 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:13.1-3.1/input0 [ 10.209045] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 10.210332] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 10.212087] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 10.214446] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 [ 10.238103] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 10.240826] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 10.242805] sd 8:0:0:2: [sdd] Attached SCSI removable disk [ 10.244182] sd 8:0:0:3: [sde] Attached SCSI removable disk [ 10.248129] usb 6-3.2: new full-speed USB device number 4 using ohci-pci [ 10.304114] usb 1-1: device not accepting address 4, error -71 [ 10.345143] usb 6-3.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 10.345149] usb 6-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.353515] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3.2/6-3.2:1.0/0003:413C:8162.0003/input/input4 [ 10.353608] hid-generic 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:13.1-3.2/input0 [ 10.418121] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 10.848132] usb 1-1: device not accepting address 5, error -71 [ 10.848285] usb usb1-port1: unable to enumerate USB device [ 10.969137] usb 1-2: new high-speed USB device number 6 using ehci-pci [ 11.105829] usb 1-2: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.00 [ 11.105831] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.105832] usb 1-2: Product: Cruzer Glide [ 11.105833] usb 1-2: Manufacturer: SanDisk [ 11.105834] usb 1-2: SerialNumber: ... [ 11.106122] usb-storage 1-2:1.0: USB Mass Storage device detected [ 11.106300] scsi host9: usb-storage 1-2:1.0 [ 11.152122] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 11.311196] usb 3-1: not running at top speed; connect to a high speed hub [ 11.323201] usb 3-1: New USB device found, idVendor=22b8, idProduct=2e82, bcdDevice= 4.09 [ 11.323207] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.323210] usb 3-1: Product: moto g(7) supra [ 11.323213] usb 3-1: Manufacturer: motorola [ 11.323217] usb 3-1: SerialNumber: ... [ 11.573123] usb 3-3: new low-speed USB device number 3 using ohci-pci [ 11.739165] usb 3-3: New USB device found, idVendor=04ca, idProduct=0022, bcdDevice= 1.09 [ 11.739171] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.739175] usb 3-3: Product: USB Keyboard [ 11.739178] usb 3-3: Manufacturer: LITEON Technology [ 11.752579] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:04CA:0022.0004/input/input6 [ 11.804255] hid-generic 0003:04CA:0022.0004: input,hidraw3: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:12.0-3/input0 [ 12.128755] scsi 9:0:0:0: Direct-Access SanDisk Cruzer Glide 1.00 PQ: 0 ANSI: 6 [ 12.129506] sd 9:0:0:0: [sdf] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 12.131026] sd 9:0:0:0: [sdf] Write Protect is off [ 12.131028] sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 12.131995] sd 9:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 12.137406] sdf: sdf1 sdf2 [ 12.141003] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 12.856352] dracut: ==> Basedev: /dev/sdf [ 12.856418] dracut: [ 12.856473] dracut: ==> blackPanther OS basedev is: /dev/sdf [ 12.856522] dracut: ==> blackPanther OS livedev is: /dev/sdf2 [ 12.856571] dracut: ==> blackPanther OS basedir is: / [ 12.856619] dracut: ==> blackPanther OS overlay is: [ 12.856661] dracut: [ 12.856710] dracut: ==> mount -n -o ro /dev/sdf /live/media [ 12.934691] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 12.937958] ISO 9660 Extensions: RRIP_1991A [ 12.940693] dracut: Run1: losetup -r /dev/loop0 /live/media/XXXXXXXXXXXXXXXXXXXXXXXXXXX [ 12.956228] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 13.073859] dracut: Mounted root filesystem overlay [ 13.403078] dracut: ==> Switching root [ 13.407424] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 14.731036] systemd[1]: System time before build time, advancing clock. [ 14.960506] systemd[1]: Inserted module 'autofs4' [ 15.069088] NET: Registered protocol family 10 [ 15.069465] Segment Routing with IPv6 [ 15.163180] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 15.175248] systemd[1]: Detected architecture x86-64. [ 15.190539] systemd[1]: Set hostname to ... [ 16.673505] systemd[1]: Reached target Swap. [ 16.673980] systemd[1]: Listening on Journal Socket. [ 16.676358] systemd[1]: Starting Load legacy module configuration... [ 16.677020] systemd[1]: Starting Setup Virtual Console... [ 16.677671] systemd[1]: Mounting POSIX Message Queue File System... [ 16.681171] systemd[1]: Starting Load Kernel Modules... [ 16.686704] systemd[1]: Listening on Process Core Dump Socket. [ 17.144627] systemd-journald[541]: Received request to flush runtime journal from PID 1 [ 17.838169] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 17.838219] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 17.862802] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.868218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.928290] Uniform Multi-Platform E-IDE driver [ 18.055392] pps_core: LinuxPPS API ver. 1 registered [ 18.055394] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 18.112505] PTP clock support registered [ 18.237491] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 18.237562] sp5100-tco sp5100-tco: Using 0xfec000f0 for watchdog MMIO address [ 18.238055] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=1) [ 18.343335] media: Linux media interface: v0.10 [ 18.424052] dell_smm_hwmon: unable to get SMM Dell signature [ 18.426078] kvm: Nested Virtualization enabled [ 18.426081] kvm: Nested Paging enabled [ 18.427375] tg3.c:v3.137 (May 11, 2014) [ 18.464140] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 18.524527] videodev: Linux video capture interface: v2.00 [ 18.666337] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 18.687410] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.687412] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.687521] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 18.705432] libphy: tg3 mdio bus: probed [ 18.716083] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC887: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 18.716086] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.716088] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 18.716089] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0 [ 18.716090] snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0 [ 18.716091] snd_hda_codec_realtek hdaudioC0D3: inputs: [ 18.716092] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19 [ 18.716094] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18 [ 18.716095] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a [ 18.765545] Broadcom BCM57780 200:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01, irq=POLL) [ 18.765878] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 18.765880] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 18.765881] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 18.804636] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 18.842077] tg3 0000:02:00.0 enp2s0: renamed from eth0 [ 19.022800] cx23885: cx23885 driver version 0.0.4 loaded [ 19.244241] ath: EEPROM regdomain: 0x60 [ 19.244243] ath: EEPROM indicates we should expect a direct regpair map [ 19.244245] ath: Country alpha2 being used: 00 [ 19.244245] ath: Regpair used: 0x60 [ 19.244395] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 19.244468] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 19.244569] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 19.244644] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 19.244697] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 19.244746] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 19.244804] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 19.244879] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 19.253808] cx23885: CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected] [ 19.381937] tveeprom: Hauppauge model 79561, rev D5D9, serial# ... [ 19.381938] tveeprom: MAC address is XX:XX:XX:XX:XX:XX [ 19.381939] tveeprom: tuner model is Microtune MT2131 (idx 139, type 4) [ 19.381940] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 19.381941] tveeprom: audio processor is CX23885 (idx 39) [ 19.381941] tveeprom: decoder processor is CX23885 (idx 33) [ 19.381942] tveeprom: has no radio [ 19.381942] cx23885: cx23885[0]: hauppauge eeprom: model=79561 [ 19.382169] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.382428] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffbe6441410000, irq=10 [ 19.390904] cx25840 12-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 19.578092] usb 6-3.3: new full-speed USB device number 5 using ohci-pci [ 19.592075] wl: loading out-of-tree module taints kernel. [ 19.592080] wl: module license 'MIXED/Proprietary' taints kernel. [ 19.592080] Disabling lock debugging due to kernel taint [ 19.603648] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 19.678232] usb 6-3.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 19.678238] usb 6-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 19.678240] usb 6-3.3: Product: Dell Wireless 365 Bluetooth Module [ 19.678241] usb 6-3.3: Manufacturer: Dell Computer Corp [ 19.745308] Bluetooth: Core ver 2.22 [ 19.745332] NET: Registered protocol family 31 [ 19.745333] Bluetooth: HCI device and connection manager initialized [ 19.745341] Bluetooth: HCI socket layer initialized [ 19.745343] Bluetooth: L2CAP socket layer initialized [ 19.745362] Bluetooth: SCO socket layer initialized [ 19.752660] usbcore: registered new interface driver btusb [ 20.090802] cx25840 12-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 20.134377] cx23885: cx23885[0]: registered device video0 [v4l2] [ 20.134457] cx23885: cx23885[0]: registered device vbi0 [ 20.134566] cx23885: cx23885[0]: alsa: registered ALSA audio device [ 20.134568] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 20.134569] cx23885: cx23885[0]: cx23885 based dvb card [ 20.185171] MT2131: successfully identified at address 0x61 [ 20.185175] dvbdev: DVB: registering new adapter (cx23885[0]) [ 20.185179] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 20.185441] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 20.185446] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 11, latency: 0, mmio: 0xfe800000 [ 20.301047] device-mapper: uevent: version 1.0.3 [ 20.301139] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 35.512409] CAPI 2.0 started up with major 68 (middleware) [ 35.938600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.938602] Bluetooth: BNEP filters: protocol multicast [ 35.938606] Bluetooth: BNEP socket layer initialized [ 36.515129] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 36.567267] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 36.570972] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 36.585529] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 36.607868] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 36.893189] NET: Registered protocol family 17 [ 37.001429] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 37.601089] tg3 0000:02:00.0 enp2s0: Link is down [ 87.270536] Bluetooth: RFCOMM TTY layer initialized [ 87.270544] Bluetooth: RFCOMM socket layer initialized [ 87.270550] Bluetooth: RFCOMM ver 1.11 [ 123.948954] sda: [ 124.356395] fuse init (API version 7.27) [ 134.668367] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 138.648763] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 138.669068] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 138.679477] wlp4s0: authenticated [ 138.680102] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 138.693165] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=0 aid=3) [ 138.693290] wlp4s0: associated [ 138.693368] ath: EEPROM regdomain: 0x8348 [ 138.693368] ath: EEPROM indicates we should expect a country code [ 138.693369] ath: doing EEPROM country->regdmn map search [ 138.693370] ath: country maps to regdmn code: 0x3a [ 138.693371] ath: Country alpha2 being used: US [ 138.693371] ath: Regpair used: 0x3a [ 138.693376] ath: regdomain 0x8348 dynamically updated by country element [ 138.693688] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 143.085946] ide-cd driver 5.00 [ 143.092340] ide-gd driver 1.18 [ 143.166124] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 143.870589] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 143.870624] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 143.870666] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 143.870697] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 143.870727] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 143.870756] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 143.870784] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 143.870825] sd 9:0:0:0: Attached scsi generic sg7 type 0