[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.39-nrj-desktop-4rosa-x86_64 (XXX@XXX) (gcc version 4.9.2 20140811 (ROSA) (Linaro GCC 4.9-2014.08) ) #1 SMP PREEMPT Thu Apr 23 13:05:13 UTC 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14.39-nrj-desktop-4rosa-x86_64 root=UUID=HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7 ro splash=silent logo.nologo resume=UUID=HASH_2DB-0E34-868F-D05B-55A3EB0E5CBA [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bce3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bce3f000-0x00000000bcebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcebf000-0x00000000bcfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcfbf000-0x00000000bcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20079 /Base Board Product Name, BIOS 40CN25WW(V2.11) 07/29/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-EFFFF write-protect [ 0.000000] F0000-FFFFF write-combining [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BD000000 mask FFF000000 uncachable [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13FE00000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01f4a000, 0x01f4afff] PGTABLE [ 0.000000] BRK [0x01f4b000, 0x01f4bfff] PGTABLE [ 0.000000] BRK [0x01f4c000, 0x01f4cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fc00000-0x13fdfffff] [ 0.000000] [mem 0x13fc00000-0x13fdfffff] page 2M [ 0.000000] BRK [0x01f4d000, 0x01f4dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fbfffff] [ 0.000000] [mem 0x13c000000-0x13fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbce3efff] [ 0.000000] [mem 0x40200000-0xbcdfffff] page 2M [ 0.000000] [mem 0xbce00000-0xbce3efff] page 4k [ 0.000000] BRK [0x01f4e000, 0x01f4efff] PGTABLE [ 0.000000] BRK [0x01f4f000, 0x01f4ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff] [ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k [ 0.000000] RAMDISK: [mem 0x327e2000-0x353e8fff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bcffe120 00008C (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 00000000bcffb000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 00000000bcfee000 00938E (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000bcf6e000 000040 [ 0.000000] ACPI: SLIC 00000000bcffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 00000000bcffc000 0000A5 (v32 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 00000000bcffa000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 00000000bcff9000 00008C (v02 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 00000000bcff8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 00000000bcfed000 000224 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bcfec000 0006FE (v01 INSYDE HR CRB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000bcfea000 000028 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 00000000bcfe7000 000034 (v07 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bcfe6000 0007C2 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bcfe5000 000996 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bcfe3000 0016E0 (v01 INSYDE HR CRB 00001000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff] [ 0.000000] NODE_DATA [mem 0x13fdfa000-0x13fdfefff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b400000-ffff88013f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xbce3efff] [ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff] [ 0.000000] node 0: [mem 0x100000000-0x13fdfffff] [ 0.000000] On node 0 totalpages: 1034204 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12009 pages used for memmap [ 0.000000] DMA32 zone: 768576 pages, LIFO batch:31 [ 0.000000] Normal zone: 4088 pages used for memmap [ 0.000000] Normal zone: 261632 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbce3f000-0xbcebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcebf000-0xbcfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcfbf000-0xbcffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fa00000 s81536 r8192 d20864 u262144 [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017887 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.39-nrj-desktop-4rosa-x86_64 root=UUID=HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7 ro splash=silent logo.nologo resume=UUID=HASH_2DB-0E34-868F-D05B-55A3EB0E5CBA [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3942700K/4136816K available (6749K kernel code, 977K rwdata, 3172K rodata, 1256K init, 1096K bss, 194116K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.768 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.53 BogoMIPS (lpj=2394768) [ 0.000037] pid_max: default: 32768 minimum: 301 [ 0.000049] ACPI: Core revision 20131218 [ 0.006190] ACPI: All ACPI Tables successfully acquired [ 0.022947] Security Framework initialized [ 0.022955] TOMOYO Linux initialized [ 0.023223] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024224] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024685] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024691] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024884] Initializing cgroup subsys memory [ 0.024890] Initializing cgroup subsys devices [ 0.024891] Initializing cgroup subsys freezer [ 0.024892] Initializing cgroup subsys net_cls [ 0.024894] Initializing cgroup subsys blkio [ 0.024895] Initializing cgroup subsys bfqio [ 0.024917] CPU: Physical Processor ID: 0 [ 0.024918] CPU: Processor Core ID: 0 [ 0.024923] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024925] mce: CPU supports 7 MCE banks [ 0.024934] CPU0: Thermal monitoring handled by SMI [ 0.024942] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 6 [ 0.025074] Freeing SMP alternatives memory: 24K (ffffffff81e30000 - ffffffff81e36000) [ 0.026116] ftrace: allocating 24775 entries in 97 pages [ 0.038940] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048953] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07) [ 0.048961] TSC deadline timer enabled [ 0.048973] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.048992] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.048995] ... version: 3 [ 0.048996] ... bit width: 48 [ 0.048997] ... generic registers: 4 [ 0.048998] ... value mask: 0000ffffffffffff [ 0.048999] ... max period: 0000ffffffffffff [ 0.049000] ... fixed-purpose events: 3 [ 0.049001] ... event mask: 000000070000000f [ 0.058127] x86: Booting SMP configuration: [ 0.058130] .... node #0, CPUs: #1 [ 0.069179] CPU1: Thermal monitoring handled by SMI [ 0.073388] #2 [ 0.084536] CPU2: Thermal monitoring handled by SMI [ 0.099893] #3 [ 0.099893] CPU3: Thermal monitoring handled by SMI [ 0.102003] x86: Booted up 1 node, 4 CPUs [ 0.102007] smpboot: Total of 4 processors activated (19158.14 BogoMIPS) [ 0.105369] devtmpfs: initialized [ 0.108943] PM: Registering ACPI NVS region [mem 0xbcebf000-0xbcfbefff] (1048576 bytes) [ 0.109749] xor: automatically using best checksumming function: [ 0.119165] avx : 17988.000 MB/sec [ 0.119169] pinctrl core: initialized pinctrl subsystem [ 0.119205] RTC time: 14:58:27, date: 06/19/15 [ 0.119239] NET: Registered protocol family 16 [ 0.119330] cpuidle: using governor ladder [ 0.119332] cpuidle: using governor menu [ 0.119367] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.119368] ACPI: bus type PCI registered [ 0.119369] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.119444] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.119447] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.119531] PCI: Using configuration type 1 for base access [ 0.119687] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.119688] mtrr: probably your BIOS does not setup all CPUs. [ 0.119689] mtrr: corrected configuration. [ 0.120448] bio: create slab <bio-0> at 0 [ 0.137206] raid6: sse2x1 6414 MB/s [ 0.154244] raid6: sse2x2 8011 MB/s [ 0.171277] raid6: sse2x4 9320 MB/s [ 0.171278] raid6: using algorithm sse2x4 (9320 MB/s) [ 0.171280] raid6: using ssse3x2 recovery algorithm [ 0.171330] ACPI: Added _OSI(Module Device) [ 0.171332] ACPI: Added _OSI(Processor Device) [ 0.171333] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.171335] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174220] ACPI: Executed 1 blocks of module-level executable AML code [ 0.185376] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.186320] ACPI: SSDT 00000000bce70718 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.186693] ACPI: Dynamic OEM Table Load: [ 0.186695] ACPI: SSDT (null) 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.191629] ACPI: SSDT 00000000bce71a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.192025] ACPI: Dynamic OEM Table Load: [ 0.192027] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.196489] ACPI: SSDT 00000000bce6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.196853] ACPI: Dynamic OEM Table Load: [ 0.196855] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.206184] ACPI: Interpreter enabled [ 0.206190] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.206194] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.206208] ACPI: (supports S0 S3 S4 S5) [ 0.206209] ACPI: Using IOAPIC for interrupt routing [ 0.206233] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.206376] ACPI: No dock devices found. [ 0.408285] ACPI: Power Resource [FN00] (off) [ 0.408366] ACPI: Power Resource [FN01] (off) [ 0.408911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.408916] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.408946] \_SB_.PCI0:_OSC invalid UUID [ 0.408947] _OSC request data:1 1f 0 [ 0.408951] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.409509] PCI host bridge to bus 0000:00 [ 0.409512] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.409513] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.409515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.409517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.409519] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff] [ 0.409526] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.409609] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.409642] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.409674] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.409714] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.409724] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] [ 0.409730] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.409735] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.409830] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.409855] pci 0000:00:16.0: reg 0x10: [mem 0xe1604000-0xe160400f 64bit] [ 0.409933] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.410014] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.410297] pci 0000:00:1a.0: reg 0x10: [mem 0xe160a000-0xe160a3ff] [ 0.411873] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.412340] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.412433] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.412519] pci 0000:00:1b.0: reg 0x10: [mem 0xe1600000-0xe1603fff 64bit] [ 0.412596] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.412636] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.412672] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.412756] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.412797] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.412833] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.412916] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.412956] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.413001] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.413273] pci 0000:00:1d.0: reg 0x10: [mem 0xe1609000-0xe16093ff] [ 0.414851] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.415331] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.415373] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.415675] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.415695] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f] [ 0.415704] pci 0000:00:1f.2: reg 0x14: [io 0x40bc-0x40bf] [ 0.415712] pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097] [ 0.415720] pci 0000:00:1f.2: reg 0x1c: [io 0x40b8-0x40bb] [ 0.415728] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.415737] pci 0000:00:1f.2: reg 0x24: [mem 0xe1608000-0xe16087ff] [ 0.415784] pci 0000:00:1f.2: PME# supported from D3hot [ 0.415851] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.415868] pci 0000:00:1f.3: reg 0x10: [mem 0xe1606000-0xe16060ff 64bit] [ 0.415889] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.416009] pci 0000:01:00.0: [1002:68e4] type 00 class 0x030000 [ 0.416023] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.416033] pci 0000:01:00.0: reg 0x18: [mem 0xe0600000-0xe061ffff 64bit] [ 0.416039] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.416050] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.416088] pci 0000:01:00.0: supports D1 D2 [ 0.416124] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.417466] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.417474] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.417481] pci 0000:00:01.0: bridge window [mem 0xe0600000-0xe15fffff] [ 0.417491] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.417680] pci 0000:07:00.0: [1969:2062] type 00 class 0x020000 [ 0.417775] pci 0000:07:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit] [ 0.417823] pci 0000:07:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.418293] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.418392] pci 0000:07:00.0: System wakeup disabled by ACPI [ 0.420511] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.420521] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.420531] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.420674] pci 0000:08:00.0: [14e4:4727] type 00 class 0x028000 [ 0.420706] pci 0000:08:00.0: reg 0x10: [mem 0xe0400000-0xe0403fff 64bit] [ 0.420897] pci 0000:08:00.0: supports D1 D2 [ 0.420899] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.420941] pci 0000:08:00.0: System wakeup disabled by ACPI [ 0.422496] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.422511] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.486095] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 10 11 12 14 15) [ 0.486143] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.486189] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.486234] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.486279] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.486324] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.486369] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.486414] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.486486] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.486982] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.487074] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.487080] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.487081] vgaarb: loaded [ 0.487082] vgaarb: bridge control possible 0000:01:00.0 [ 0.487083] vgaarb: no bridge control possible 0000:00:02.0 [ 0.487159] SCSI subsystem initialized [ 0.487200] libata version 3.00 loaded. [ 0.487287] PCI: Using ACPI for IRQ routing [ 0.488973] PCI: pci_cache_line_size set to 64 bytes [ 0.489059] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.489061] e820: reserve RAM buffer [mem 0xbce3f000-0xbfffffff] [ 0.489062] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff] [ 0.489064] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff] [ 0.489151] NetLabel: Initializing [ 0.489153] NetLabel: domain hash size = 128 [ 0.489153] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.489165] NetLabel: unlabeled traffic allowed by default [ 0.489196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.489201] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.491228] Switched to clocksource hpet [ 0.498917] pnp: PnP ACPI init [ 0.498927] ACPI: bus type PNP registered [ 0.498961] pnp 00:00: [dma 4] [ 0.498982] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.499003] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.499100] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.499130] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.499177] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.499179] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.499181] system 00:04: [io 0x1010-0x1013] has been reserved [ 0.499183] system 00:04: [io 0xffff] has been reserved [ 0.499185] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.499187] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.499189] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.499191] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.499193] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499216] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.499264] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.499266] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.562479] pnp 00:07: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active) [ 0.562652] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.562765] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.562767] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.562769] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.562771] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.562773] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.562775] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.562777] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.562779] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.562781] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.562783] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 0.562785] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.563014] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.563016] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved [ 0.563019] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.563035] pnp: PnP ACPI: found 11 devices [ 0.563036] ACPI: bus type PNP unregistered [ 0.567583] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.567610] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0620000-0xe063ffff pref] [ 0.567613] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.567615] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.567618] pci 0000:00:01.0: bridge window [mem 0xe0600000-0xe15fffff] [ 0.567621] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.567624] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.567627] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.567632] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.567641] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.567646] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.567655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.567657] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.567659] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.567660] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.567662] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.567664] pci_bus 0000:01: resource 1 [mem 0xe0600000-0xe15fffff] [ 0.567665] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.567667] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.567669] pci_bus 0000:07: resource 1 [mem 0xe0500000-0xe05fffff] [ 0.567671] pci_bus 0000:08: resource 1 [mem 0xe0400000-0xe04fffff] [ 0.567704] NET: Registered protocol family 2 [ 0.567896] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.567980] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.568081] TCP: Hash tables configured (established 32768 bind 32768) [ 0.568101] TCP: reno registered [ 0.568109] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.568128] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.568191] NET: Registered protocol family 1 [ 0.568202] pci 0000:00:02.0: Boot video device [ 0.590503] PCI: CLS 64 bytes, default 64 [ 0.590549] Trying to unpack rootfs image as initramfs... [ 1.348284] Freeing initrd memory: 45084K (ffff8800327e2000 - ffff8800353e9000) [ 1.348289] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.348291] software IO TLB [mem 0xb8e3f000-0xbce3f000] (64MB) mapped at [ffff8800b8e3f000-ffff8800bce3efff] [ 1.348322] Simple Boot Flag at 0x44 set to 0x1 [ 1.348753] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.367939] bounce pool size: 64 pages [ 1.367948] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.370065] zbud: loaded [ 1.370406] VFS: Disk quotas dquot_6.5.2 [ 1.370447] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.370874] msgmni has been set to 7788 [ 1.371180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.371219] io scheduler noop registered [ 1.371221] io scheduler deadline registered [ 1.371271] io scheduler cfq registered [ 1.371315] io scheduler bfq registered (default) [ 1.371316] BFQ I/O-scheduler version: v7r7 [ 1.371503] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.371771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.371785] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.371850] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.372268] Linux agpgart interface v0.103 [ 1.372347] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0xffffc90004800000 [ 1.372350] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096 [ 1.374259] Console: switching to colour frame buffer device 128x48 [ 1.376094] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 1.376102] intel_idle: MWAIT substates: 0x21120 [ 1.376103] intel_idle: v0.4 model 0x2A [ 1.376104] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.376690] ACPI: AC Adapter [ACAD] (on-line) [ 1.376910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 1.376914] ACPI: Power Button [PWRB] [ 1.377087] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input1 [ 1.377090] ACPI: Sleep Button [SLPB] [ 1.377130] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.377214] ACPI: Lid Switch [LID0] [ 1.377248] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.377250] ACPI: Power Button [PWRF] [ 1.377300] ACPI: Fan [FAN0] (off) [ 1.377325] ACPI: Fan [FAN1] (off) [ 1.380155] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.380157] ACPI: Thermal Zone [TZ00] (0 C) [ 1.380179] GHES: HEST is not enabled! [ 1.381434] brd: module loaded [ 1.381530] ahci 0000:00:1f.2: version 3.0 [ 1.381637] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.381659] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.392116] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.392121] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.394728] scsi0 : ahci [ 1.395082] scsi1 : ahci [ 1.395380] scsi2 : ahci [ 1.395619] scsi3 : ahci [ 1.395735] scsi4 : ahci [ 1.395899] scsi5 : ahci [ 1.395945] ata1: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608100 irq 41 [ 1.395947] ata2: DUMMY [ 1.395950] ata3: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608200 irq 41 [ 1.395951] ata4: DUMMY [ 1.395952] ata5: DUMMY [ 1.395953] ata6: DUMMY [ 1.396039] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.438994] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.439022] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.439132] mousedev: PS/2 mouse device common for all mice [ 1.441137] rtc_cmos 00:05: RTC can wake from S4 [ 1.441269] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.441299] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.441374] device-mapper: uevent: version 1.0.3 [ 1.441457] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: XXX@XXX [ 1.441461] Intel P-state driver initializing. [ 1.441624] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441912] TCP: cubic registered [ 1.441943] Key type dns_resolver registered [ 1.441947] mpls_gso: MPLS GSO support [ 1.442601] registered taskstats version 1 [ 1.443313] bio: create slab <bio-1> at 1 [ 1.444064] Btrfs loaded [ 1.444941] Magic number: 3:355:991 [ 1.445031] memory memory34: hash matches [ 1.445117] rtc_cmos 00:05: setting system clock to 2015-06-19 14:58:28 UTC (1434725908) [ 1.445122] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.445125] EDD information not available. [ 1.445291] PM: Checking hibernation image partition UUID=HASH_2DB-0E34-868F-D05B-55A3EB0E5CBA [ 1.490260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.621128] ACPI: Battery Slot [BAT1] (battery present) [ 1.701380] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.706188] ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133 [ 1.706194] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.709035] ata1.00: configured for UDMA/133 [ 1.709500] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5 [ 1.709932] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.709941] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.710249] sd 0:0:0:0: [sda] Write Protect is off [ 1.710256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.710374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.854901] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 1.857072] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.014654] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.016618] ata3.00: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100 [ 2.018823] ata3.00: configured for UDMA/100 [ 2.021211] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7710H A833 PQ: 0 ANSI: 5 [ 2.350916] tsc: Refined TSC clocksource calibration: 2394.560 MHz [ 3.289890] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 570026 [ 3.352020] Switched to clocksource tsc [ 3.416612] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.424344] PM: Hibernation image not present or could not be loaded. [ 3.428297] Freeing unused kernel memory: 1256K (ffffffff81cf6000 - ffffffff81e30000) [ 3.428302] Write protecting the kernel read-only data: 12288k [ 3.437300] Freeing unused kernel memory: 1432K (ffff88000169a000 - ffff880001800000) [ 3.442361] Freeing unused kernel memory: 924K (ffff880001b19000 - ffff880001c00000) [ 3.537668] dracut: dracut-037-28 [ 3.683912] loop: module loaded [ 3.689650] RPC: Registered named UNIX socket transport module. [ 3.689653] RPC: Registered udp transport module. [ 3.689654] RPC: Registered tcp transport module. [ 3.689654] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.697855] NET: Registered protocol family 10 [ 3.710042] systemd-udevd[308]: starting version 208 [ 3.710243] random: systemd-udevd urandom read with 34 bits of entropy available [ 3.732448] [drm] Initialized drm 1.1.0 20060810 [ 3.742990] [drm] Memory usable by graphics device = 2048M [ 3.743015] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 3.743018] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver [ 3.743034] Console: switching to colour dummy device 80x25 [ 3.743986] [drm] radeon kernel modesetting enabled. [ 3.744003] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 3.744050] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 3.749106] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 3.749115] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.749117] [drm] Driver supports precise vblank timestamp query. [ 3.749244] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none [ 3.772173] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 3.772176] [drm] This can cause pipe underruns and display issues. [ 3.772177] [drm] Please upgrade your BIOS to fix this. [ 3.783301] fbcon: inteldrmfb (fb0) is primary device [ 4.548722] Console: switching to colour frame buffer device 170x48 [ 4.550908] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.550910] i915 0000:00:02.0: registered panic notifier [ 4.551071] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 4.551331] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 4.553002] acpi LNXVIDEO:02: registered as cooling_device6 [ 4.553063] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input7 [ 4.553138] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553143] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553149] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553155] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553161] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553167] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553174] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 4.553551] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.556350] acpi device:35: registered as cooling_device7 [ 4.556469] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:0a/input/input8 [ 4.556517] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.556679] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E4 0x17AA:0x397A). [ 4.556698] [drm] register mmio base: 0xE0600000 [ 4.556700] [drm] register mmio size: 131072 [ 4.556702] vga_switcheroo: enabled [ 4.556788] ATPX version 1, functions 0x00000183 [ 5.338294] ATOM BIOS: Lenovo [ 5.338393] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 5.338399] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 5.338403] [drm] Detected VRAM RAM=1024M, BAR=256M [ 5.338406] [drm] RAM width 64bits DDR [ 5.338621] [TTM] Zone kernel: Available graphics memory: 1995710 kiB [ 5.338625] [TTM] Initializing pool allocator [ 5.338646] [TTM] Initializing DMA pool allocator [ 5.338688] [drm] radeon: 1024M of VRAM memory ready [ 5.338691] [drm] radeon: 1024M of GTT memory ready. [ 5.338724] [drm] Loading CEDAR Microcode [ 5.338859] [drm] Internal thermal controller with fan control [ 5.343685] [drm] radeon: dpm initialized [ 5.343819] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.345899] [drm] PCIE gen 2 link speeds already enabled [ 5.350001] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000). [ 5.350157] radeon 0000:01:00.0: WB enabled [ 5.350164] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800343a8c00 [ 5.350169] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800343a8c0c [ 5.350692] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001531c418 [ 5.350696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.350698] [drm] Driver supports precise vblank timestamp query. [ 5.350702] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 5.350740] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 5.350760] radeon 0000:01:00.0: radeon: using MSI. [ 5.350804] [drm] radeon: irq initialized. [ 5.367965] [drm] ring test on 0 succeeded in 1 usecs [ 5.367976] [drm] ring test on 3 succeeded in 1 usecs [ 5.565958] [drm] ring test on 5 succeeded in 2 usecs [ 5.565962] [drm] UVD initialized successfully. [ 5.566163] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.566191] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.728392] [drm] ib test on ring 5 succeeded [ 5.728658] [drm] Radeon Display Connectors [ 5.740039] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5.741404] radeon 0000:01:00.0: No connectors reported connected with modes [ 5.741407] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.742737] [drm] fb mappable at 0xC045E000 [ 5.742738] [drm] vram apper at 0xC0000000 [ 5.742739] [drm] size 3145728 [ 5.742740] [drm] fb depth is 24 [ 5.742741] [drm] pitch is 4096 [ 5.742914] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 5.743462] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 1 [ 5.745898] dracut: Starting plymouth daemon [ 6.143824] dracut: rd.md=0: removing MD RAID activation [ 6.294444] ACPI: bus type USB registered [ 6.294481] usbcore: registered new interface driver usbfs [ 6.294496] usbcore: registered new interface driver hub [ 6.295179] usbcore: registered new device driver usb [ 6.295653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.295821] ehci-pci: EHCI PCI platform driver [ 6.295945] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 6.295951] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 6.295965] ehci-pci 0000:00:1a.0: debug port 2 [ 6.299878] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 6.299900] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe160a000 [ 6.300429] AVX version of gcm_enc/dec engaged. [ 6.309731] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 6.310312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.310316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 6.310319] usb usb1: Product: EHCI Host Controller [ 6.310321] usb usb1: Manufacturer: Linux 3.14.39-nrj-desktop-4rosa-x86_64 ehci_hcd [ 6.310323] usb usb1: SerialNumber: ... [ 6.310498] hub 1-0:1.0: USB hub found [ 6.310506] hub 1-0:1.0: 2 ports detected [ 6.310923] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 6.310932] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.310948] ehci-pci 0000:00:1d.0: debug port 2 [ 6.314902] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 6.314927] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1609000 [ 6.315605] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.315609] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.315785] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.320205] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 6.320264] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.320266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 6.320268] usb usb2: Product: EHCI Host Controller [ 6.320269] usb usb2: Manufacturer: Linux 3.14.39-nrj-desktop-4rosa-x86_64 ehci_hcd [ 6.320271] usb usb2: SerialNumber: ... [ 6.320416] hub 2-0:1.0: USB hub found [ 6.320425] hub 2-0:1.0: 2 ports detected [ 6.323227] atl1c 0000:07:00.0: version XXX.XXX.XXX.XXX-NAPI [ 6.579266] random: nonblocking pool is initialized [ 6.612485] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.726940] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 6.726948] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.727380] hub 1-1:1.0: USB hub found [ 6.727431] hub 1-1:1.0: 6 ports detected [ 6.830677] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 6.945139] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 6.945149] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.945584] hub 2-1:1.0: USB hub found [ 6.945744] hub 2-1:1.0: 6 ports detected [ 7.019939] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 7.105755] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139 [ 7.105762] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.105766] usb 1-1.4: Product: USB2.0-CRW [ 7.105770] usb 1-1.4: Manufacturer: Generic [ 7.105773] usb 1-1.4: SerialNumber: ... [ 7.107551] rts5139: module is from the staging directory, the quality is unknown, you have been warned. [ 7.112078] scsi6 : SCSI emulation for RTS5139 USB card reader [ 7.112392] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 7.198884] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.221120] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 7.296203] usbcore: registered new interface driver rts5139 [ 7.300292] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c06c [ 7.300299] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.300303] usb 2-1.1: Product: USB Optical Mouse [ 7.300315] usb 2-1.1: Manufacturer: Logitech [ 7.302500] hidraw: raw HID events driver (C) Jiri Kosina [ 7.305608] usbcore: registered new interface driver usbhid [ 7.305612] usbhid: USB HID core driver [ 7.306430] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C06C.0001/input/input9 [ 7.306605] hid-generic 0003:046D:C06C.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0 [ 7.374235] usb 2-1.2: new high-speed USB device number 4 using ehci-pci [ 7.460055] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=0b2a [ 7.460064] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.460069] usb 2-1.2: Product: HP LaserJet CP1025 [ 7.460073] usb 2-1.2: Manufacturer: Hewlett-Packard [ 7.460078] usb 2-1.2: SerialNumber: ... [ 7.534380] usb 2-1.6: new high-speed USB device number 5 using ehci-pci [ 7.634114] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b272 [ 7.634124] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.634129] usb 2-1.6: Product: Lenovo EasyCamera [ 7.634133] usb 2-1.6: Manufacturer: Chicony Corp. [ 7.805515] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 7.805525] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 7.805542] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [ 7.805560] PM: Marking nosave pages: [mem 0xbce3f000-0xbcffefff] [ 7.805575] PM: Marking nosave pages: [mem 0xbd000000-0xffffffff] [ 7.807154] PM: Basic memory bitmaps created [ 7.859161] PM: Basic memory bitmaps freed [ 7.859172] video LNXVIDEO:00: Restoring backlight state [ 7.860315] video LNXVIDEO:0a: Restoring backlight state [ 7.866073] PM: Starting manual resume from disk [ 7.866081] PM: Hibernation image partition 8:9 present [ 7.866084] PM: Looking for hibernation image. [ 7.898136] PM: Image not found (code -22) [ 7.898143] PM: Hibernation image not present or could not be loaded. [ 8.079394] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 8.236962] dracut: Checking ext4: /dev/disk/by-uuid/HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7 [ 8.237256] dracut: issuing e2fsck -a /dev/disk/by-uuid/HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7 [ 8.283482] dracut: /dev/disk/by-uuid/HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7: clean, 149479/960992 files, 1417679/3839744 blocks [ 8.288529] dracut: Mounting /dev/disk/by-uuid/HASH_1A3-7E63-3DA5-8CE9-F5A2F5700CB7 with -o acl,noatime,nofail,ro [ 8.328446] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl [ 8.386339] dracut: Mounted root filesystem /dev/sda7 [ 9.021498] dracut: Switching root [ 9.025444] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.416057] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 9.472143] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 9.699554] systemd[1]: Inserted module 'autofs4' [ 9.715859] systemd[1]: Set hostname to ... [ 10.503882] systemd[1]: Starting RPC Port Mapper. [ 10.504015] systemd[1]: Reached target RPC Port Mapper. [ 10.504046] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 10.504193] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.504217] systemd[1]: Starting Login Prompts. [ 10.504300] systemd[1]: Reached target Login Prompts. [ 10.504336] systemd[1]: Starting Syslog Socket. [ 10.504497] systemd[1]: Listening on Syslog Socket. [ 10.504535] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 10.504655] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 10.504688] systemd[1]: Starting Delayed Shutdown Socket. [ 10.504862] systemd[1]: Listening on Delayed Shutdown Socket. [ 10.504912] systemd[1]: Starting udev Kernel Socket. [ 10.505021] systemd[1]: Listening on udev Kernel Socket. [ 10.505060] systemd[1]: Starting udev Control Socket. [ 10.505171] systemd[1]: Listening on udev Control Socket. [ 10.505205] systemd[1]: Starting Encrypted Volumes. [ 10.505289] systemd[1]: Reached target Encrypted Volumes. [ 10.505326] systemd[1]: Starting Journal Socket. [ 10.505473] systemd[1]: Listening on Journal Socket. [ 10.512364] systemd[1]: Starting Load legacy module configuration... [ 10.513445] systemd[1]: Starting Setup Virtual Console... [ 10.514235] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 10.515149] systemd[1]: Mounting Debug File System... [ 10.516054] systemd[1]: Mounting Huge Pages File System... [ 10.516691] systemd[1]: Starting Set default kernel console loglevel... [ 10.525739] systemd[1]: Starting Load Kernel Modules... [ 10.526433] systemd[1]: Mounting POSIX Message Queue File System... [ 10.526957] systemd[1]: Starting udev Coldplug all Devices... [ 10.527545] systemd[1]: Starting Journal Service... [ 10.528316] systemd[1]: Started Journal Service. [ 11.413617] systemd-udevd[696]: starting version 208 [ 11.935262] EXT4-fs (sda7): re-mounted. Opts: acl [ 12.068893] systemd-journald[672]: Received request to flush runtime journal from PID 1 [ 12.496455] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input10 [ 12.582270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.685043] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 12.754872] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 12.754882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.754887] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 12.754891] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258) [ 12.754896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.754897] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 12.754901] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258) [ 12.754905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.754907] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 12.754910] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258) [ 12.754914] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.754916] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.774176] hda_codec: CX20590: BIOS auto-probing. [ 12.774604] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 12.774606] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.774607] hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ 12.774608] mono: mono_out=0x0 [ 12.774609] inputs: [ 12.774610] Mic=0x1b [ 12.774612] Internal Mic=0x1a [ 12.775476] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 12.775519] hda_codec: Enable sync_write for stable communication [ 12.797499] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [ 12.811413] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.811529] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.811603] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.833360] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 12.833368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.143267] cfg80211: Calling CRDA to update world regulatory domain [ 13.324128] WARNING! power/level is deprecated; use power/control instead [ 13.582552] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17 [ 13.599354] systemd-journald[672]: Received request to flush runtime journal from PID 1 [ 14.062553] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0B2A [ 14.062578] usbcore: registered new interface driver usblp [ 14.362666] media: Linux media interface: v0.10 [ 14.502189] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17 [ 14.502709] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 14.502765] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17 [ 14.502809] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17 [ 14.503109] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 14.503738] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17 [ 14.503775] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17 [ 14.504114] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 14.504123] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17 [ 14.504143] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17 [ 14.504486] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 14.504489] perf_event_intel: PEBS enabled due to microcode update [ 14.504557] microcode: Microcode Update Driver: v2.00 <XXX@XXX>, Peter Oruba [ 14.591200] Linux video capture interface: v2.00 [ 14.820912] iTCO_vendor_support: vendor-support=0 [ 14.822499] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 14.822546] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 14.822698] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 14.865076] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b272) [ 14.866948] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15 [ 14.867043] usbcore: registered new interface driver uvcvideo [ 14.867047] USB Video Class driver (1.1.1) [ 15.657099] cfg80211: World regulatory domain updated: [ 15.657109] cfg80211: DFS Master region: unset [ 15.657113] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.657121] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 15.657152] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 15.657159] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 15.657169] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 15.657175] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 15.657180] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 15.657186] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 15.657191] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 16.032754] Adding 8805372k swap on /dev/sda9. Priority:-1 extents:1 across:8805372k FS [ 18.613488] wl: module license 'MIXED/Proprietary' taints kernel. [ 18.613493] Disabling lock debugging due to kernel taint [ 18.651121] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller XXX.XXX.XXX.XXX (r487574) [ 21.542371] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl [ 21.577612] cfg80211: Calling CRDA for country: RU [ 21.583498] cfg80211: Regulatory domain changed to country: RU [ 21.583504] cfg80211: DFS Master region: ETSI [ 21.583507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.583511] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.583515] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.583518] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.583522] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 21.583525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 25.742943] [drm] PCIE gen 2 link speeds already enabled [ 25.747412] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000). [ 25.747520] radeon 0000:01:00.0: WB enabled [ 25.747526] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800343a8c00 [ 25.747530] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800343a8c0c [ 25.748045] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001531c418 [ 25.764598] [drm] ring test on 0 succeeded in 1 usecs [ 25.764609] [drm] ring test on 3 succeeded in 1 usecs [ 25.962805] [drm] ring test on 5 succeeded in 2 usecs [ 25.962812] [drm] UVD initialized successfully. [ 25.962846] [drm] ib test on ring 0 succeeded in 0 usecs [ 25.962877] [drm] ib test on ring 3 succeeded in 1 usecs [ 26.125114] [drm] ib test on ring 5 succeeded [ 31.978289] atl1c 0000:07:00.0: irq 46 for MSI/MSI-X [ 31.993054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.303222] NET: Registered protocol family 17 [ 32.392759] [drm] PCIE gen 2 link speeds already enabled [ 32.396228] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000). [ 32.396320] radeon 0000:01:00.0: WB enabled [ 32.396323] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800343a8c00 [ 32.396326] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800343a8c0c [ 32.396848] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001531c418 [ 32.413275] [drm] ring test on 0 succeeded in 1 usecs [ 32.413285] [drm] ring test on 3 succeeded in 1 usecs [ 32.601215] [drm] ring test on 5 succeeded in 0 usecs [ 32.601236] [drm] UVD initialized successfully. [ 32.601373] [drm] ib test on ring 0 succeeded in 0 usecs [ 32.601514] [drm] ib test on ring 3 succeeded in 1 usecs [ 32.754568] [drm] ib test on ring 5 succeeded [ 35.837517] usblp1: removed [ 35.839031] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0B2A [ 37.624960] PPP generic driver version 2.4.2 [ 37.627160] NET: Registered protocol family 24 [ 37.637594] l2tp_core: L2TP core driver, V2.0 [ 37.640895] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 38.073722] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 39.894375] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.918958] Netfilter messages via NETLINK v0.30. [ 39.922313] ctnetlink v0.93: registering with nfnetlink. [ 40.360043] Bridge firewalling registered [ 65.197652] Bluetooth: Core ver 2.18 [ 65.197676] NET: Registered protocol family 31 [ 65.197677] Bluetooth: HCI device and connection manager initialized [ 65.197688] Bluetooth: HCI socket layer initialized [ 65.197690] Bluetooth: L2CAP socket layer initialized [ 65.197701] Bluetooth: SCO socket layer initialized [ 65.238312] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 65.238316] Bluetooth: BNEP filters: protocol multicast [ 65.238325] Bluetooth: BNEP socket layer initialized [ 96.431788] usblp1: removed [ 279.392820] fuse init (API version 7.22) [ 500.142364] Uniform Multi-Platform E-IDE driver [ 500.161528] ide-cd driver 5.00 [ 500.169842] ide-gd driver 1.18 [ 500.197397] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 500.423516] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 500.423629] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 500.423715] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 501.488330] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 534.446454] lp: driver loaded but no devices found [ 534.505220] ppdev: user-space parallel port driver [ 560.481404] cfg80211: Calling CRDA to update world regulatory domain [ 560.481574] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 560.501544] cfg80211: World regulatory domain updated: [ 560.501547] cfg80211: DFS Master region: unset [ 560.501548] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 560.501550] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 560.501551] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 560.501552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 560.501553] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 560.501554] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 560.501556] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 560.501557] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 560.501558] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 560.501575] cfg80211: Calling CRDA for country: RU [ 560.505409] cfg80211: Regulatory domain changed to country: RU [ 560.505413] cfg80211: DFS Master region: ETSI [ 560.505414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 560.505417] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 560.505419] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 560.505421] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 560.505423] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 560.505425] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 567.638615] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 598.432797] usb 2-1.2: USB disconnect, device number 4 [ 1153.574279] usb 2-1.2: new high-speed USB device number 6 using ehci-pci [ 1153.662110] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=3b2a [ 1153.662120] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1153.662125] usb 2-1.2: Product: HP Color LaserJet MFP M277dw [ 1153.662130] usb 2-1.2: Manufacturer: Hewlett-Packard [ 1153.662134] usb 2-1.2: SerialNumber: ... [ 1153.664731] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1155.376037] usblp1: removed [ 1155.380595] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1158.120144] lp: driver loaded but no devices found [ 1158.194866] ppdev: user-space parallel port driver [ 1158.236778] usblp1: removed [ 1158.250071] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1205.666937] usblp1: removed [ 1223.444564] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1451.199915] cfg80211: Calling CRDA to update world regulatory domain [ 1451.200245] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1451.243428] cfg80211: World regulatory domain updated: [ 1451.243434] cfg80211: DFS Master region: unset [ 1451.243436] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1451.243440] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1451.243443] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1451.243445] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 1451.243447] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1451.243450] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1451.243453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 1451.243455] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1451.243458] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 1451.243484] cfg80211: Calling CRDA for country: RU [ 1451.249676] cfg80211: Regulatory domain changed to country: RU [ 1451.249682] cfg80211: DFS Master region: ETSI [ 1451.249684] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1451.249687] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1451.249690] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1451.249692] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1451.249694] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 1451.249697] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 1456.739797] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1647.462065] usblp1: removed [ 1650.471641] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1655.386943] usblp1: removed [ 1663.901059] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A [ 1785.738956] usb 2-1.2: USB disconnect, device number 6 [ 1785.739356] usblp1: removed [ 2468.475595] usb 2-1.2: new high-speed USB device number 7 using ehci-pci [ 2468.572011] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=222a [ 2468.572022] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2468.572027] usb 2-1.2: Product: HP LaserJet Pro MFP M125nw [ 2468.572031] usb 2-1.2: Manufacturer: Hewlett-Packard [ 2468.572035] usb 2-1.2: SerialNumber: ... [ 2468.677821] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 2468.677943] scsi7 : usb-storage 2-1.2:1.0 [ 2468.678084] usbcore: registered new interface driver usb-storage [ 2469.709140] usb 2-1.2: USB disconnect, device number 7 [ 2471.037841] usb 2-1.2: new high-speed USB device number 8 using ehci-pci [ 2471.140302] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=222a [ 2471.140312] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2471.140317] usb 2-1.2: Product: HP LaserJet Pro MFP M125nw [ 2471.140321] usb 2-1.2: Manufacturer: Hewlett-Packard [ 2471.140325] usb 2-1.2: SerialNumber: ... [ 2471.142266] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 2472.769677] usblp1: removed [ 2472.772289] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 3061.850911] usblp1: removed [ 3061.851142] Did not find alt setting 1 for intf 0, config 1 [ 3078.529314] cfg80211: Calling CRDA to update world regulatory domain [ 3078.529642] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3078.566976] cfg80211: World regulatory domain updated: [ 3078.566983] cfg80211: DFS Master region: unset [ 3078.566986] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3078.566991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3078.566995] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3078.566999] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 3078.567002] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 3078.567006] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 3078.567010] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 3078.567013] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 3078.567017] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 3078.567047] cfg80211: Calling CRDA for country: RU [ 3078.576803] cfg80211: Regulatory domain changed to country: RU [ 3078.576809] cfg80211: DFS Master region: ETSI [ 3078.576811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3078.576815] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3078.576819] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3078.576823] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3078.576826] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 3078.576829] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 3085.443991] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 3265.899729] usb 2-1.2: USB disconnect, device number 8 [ 3278.631399] usb 2-1.2: new high-speed USB device number 9 using ehci-pci [ 3278.733562] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=222a [ 3278.733573] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3278.733578] usb 2-1.2: Product: HP LaserJet Pro MFP M125nw [ 3278.733582] usb 2-1.2: Manufacturer: Hewlett-Packard [ 3278.733586] usb 2-1.2: SerialNumber: ... [ 3278.735167] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 3280.333809] usblp1: removed [ 3280.335661] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 3339.945995] usb 2-1.2: USB disconnect, device number 9 [ 3339.946579] usblp1: removed [ 4225.862184] usb 2-1.3: new high-speed USB device number 10 using ehci-pci [ 4225.948914] usb 2-1.3: New USB device found, idVendor=03f0, idProduct=6e12 [ 4225.948924] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4225.948929] usb 2-1.3: Product: Officejet 7610 series [ 4225.948933] usb 2-1.3: Manufacturer: HP [ 4225.948937] usb 2-1.3: SerialNumber: ... [ 4225.951203] usblp 2-1.3:1.1: usblp1: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6E12 [ 4225.951325] usb-storage 2-1.3:1.2: USB Mass Storage device detected [ 4225.951515] scsi8 : usb-storage 2-1.3:1.2 [ 4225.952406] usblp 2-1.3:1.3: usblp2: USB Bidirectional printer dev 10 if 3 alt 0 proto 2 vid 0x03F0 pid 0x6E12 [ 4226.954505] scsi 8:0:0:0: Direct-Access HP Officejet 7610 s 1.00 PQ: 0 ANSI: 5 [ 4226.954819] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 4226.956893] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 4227.603758] usblp1: removed [ 4227.604810] usblp 2-1.3:1.1: usblp1: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6E12 [ 4227.605404] usblp2: removed [ 4227.608347] usblp 2-1.3:1.3: usblp2: USB Bidirectional printer dev 10 if 3 alt 0 proto 2 vid 0x03F0 pid 0x6E12 [ 4259.352305] usblp1: removed [ 4259.352572] Did not find alt setting 1 for intf 0, config 1 [ 4415.220994] Did not find alt setting 1 for intf 0, config 1 [ 4510.810234] cfg80211: Calling CRDA to update world regulatory domain [ 4510.810647] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4510.858814] cfg80211: World regulatory domain updated: [ 4510.858820] cfg80211: DFS Master region: unset [ 4510.858823] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4510.858827] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4510.858830] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4510.858832] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 4510.858834] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 4510.858837] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 4510.858839] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 4510.858842] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 4510.858844] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 4510.858872] cfg80211: Calling CRDA for country: RU [ 4510.866163] cfg80211: Regulatory domain changed to country: RU [ 4510.866169] cfg80211: DFS Master region: ETSI [ 4510.866171] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4510.866175] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4510.866178] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4510.866180] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4510.866182] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 4510.866185] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 4515.489308] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 4626.058975] Did not find alt setting 1 for intf 0, config 1 [ 4645.992573] Did not find alt setting 1 for intf 0, config 1 [ 4661.780490] Did not find alt setting 1 for intf 0, config 1 [ 4723.232089] Did not find alt setting 1 for intf 0, config 1 [ 4749.751589] Did not find alt setting 1 for intf 0, config 1 [ 4813.445252] usb 2-1.3: USB disconnect, device number 10 [ 4813.456159] usblp2: removed [ 5271.224210] usb 2-1.3: new high-speed USB device number 11 using ehci-pci [ 5271.322121] usb 2-1.3: New USB device found, idVendor=03f0, idProduct=222a [ 5271.322132] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5271.322137] usb 2-1.3: Product: HP LaserJet Pro MFP M125nw [ 5271.322142] usb 2-1.3: Manufacturer: Hewlett-Packard [ 5271.322146] usb 2-1.3: SerialNumber: ... [ 5271.322973] usb-storage 2-1.3:1.0: USB Mass Storage device detected [ 5271.323671] scsi9 : usb-storage 2-1.3:1.0 [ 5272.358901] usb 2-1.3: USB disconnect, device number 11 [ 5273.530361] usb 2-1.3: new high-speed USB device number 12 using ehci-pci [ 5273.629611] usb 2-1.3: New USB device found, idVendor=03f0, idProduct=222a [ 5273.629622] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5273.629627] usb 2-1.3: Product: HP LaserJet Pro MFP M125nw [ 5273.629631] usb 2-1.3: Manufacturer: Hewlett-Packard [ 5273.629635] usb 2-1.3: SerialNumber: ... [ 5273.631520] usblp 2-1.3:1.1: usblp1: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 5275.249497] usblp1: removed [ 5275.253597] usblp 2-1.3:1.1: usblp1: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x03F0 pid 0x222A [ 5400.510153] usblp1: removed [ 5400.510266] Did not find alt setting 1 for intf 0, config 1 [ 5439.721836] Did not find alt setting 1 for intf 0, config 1 [ 5510.341132] cfg80211: Calling CRDA to update world regulatory domain [ 5510.342458] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5510.373608] cfg80211: World regulatory domain updated: [ 5510.373614] cfg80211: DFS Master region: unset [ 5510.373617] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5510.373621] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5510.373624] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5510.373628] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 5510.373631] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 5510.373634] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 5510.373637] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 5510.373641] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 5510.373644] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 5510.373670] cfg80211: Calling CRDA for country: RU [ 5510.378535] cfg80211: Regulatory domain changed to country: RU [ 5510.378539] cfg80211: DFS Master region: ETSI [ 5510.378541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5510.378543] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5510.378545] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5510.378547] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5510.378549] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 5510.378551] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 5514.383861] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 5713.788856] usb 2-1.3: USB disconnect, device number 12 [ 6061.970449] lp: driver loaded but no devices found [ 6061.997482] ppdev: user-space parallel port driver [ 6065.238402] usb 2-1.2: new high-speed USB device number 13 using ehci-pci [ 6065.324307] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=002a [ 6065.324314] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6065.324319] usb 2-1.2: Product: HP LaserJet Professional P1102 [ 6065.324322] usb 2-1.2: Manufacturer: Hewlett-Packard [ 6065.324326] usb 2-1.2: SerialNumber: ... [ 6065.324885] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 6065.325044] scsi10 : usb-storage 2-1.2:1.0 [ 6066.342201] usb 2-1.2: USB disconnect, device number 13 [ 6067.544529] usb 2-1.2: new high-speed USB device number 14 using ehci-pci [ 6068.027749] usb 2-1.2: device not accepting address 14, error -71 [ 6071.900188] usb 2-1.2: new high-speed USB device number 16 using ehci-pci [ 6071.986828] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=002a [ 6071.986838] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6071.986843] usb 2-1.2: Product: HP LaserJet Professional P1102 [ 6071.986847] usb 2-1.2: Manufacturer: Hewlett-Packard [ 6071.986852] usb 2-1.2: SerialNumber: ... [ 6071.989481] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 6073.615633] usblp1: removed [ 6073.620658] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 6099.454443] usblp1: removed [ 6125.272053] usb 2-1.2: USB disconnect, device number 16 [ 6126.473779] usb 2-1.2: new high-speed USB device number 17 using ehci-pci [ 6126.560331] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=002a [ 6126.560341] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6126.560346] usb 2-1.2: Product: HP LaserJet Professional P1102 [ 6126.560350] usb 2-1.2: Manufacturer: Hewlett-Packard [ 6126.560354] usb 2-1.2: SerialNumber: ... [ 6126.563055] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 6128.178285] usblp1: removed [ 6128.183159] usblp 2-1.2:1.0: usblp1: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 6368.923094] cfg80211: Calling CRDA to update world regulatory domain [ 6368.923175] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6368.941682] cfg80211: World regulatory domain updated: [ 6368.941686] cfg80211: DFS Master region: unset [ 6368.941688] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6368.941691] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6368.941693] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6368.941695] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 6368.941697] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6368.941699] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6368.941701] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 6368.941703] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 6368.941705] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 6368.941722] cfg80211: Calling CRDA for country: RU [ 6368.949729] cfg80211: Regulatory domain changed to country: RU [ 6368.949732] cfg80211: DFS Master region: ETSI [ 6368.949733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6368.949735] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6368.949736] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6368.949737] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6368.949739] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 6368.949740] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 6377.688105] atl1c 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.