[ 0.000000] Linux version 6.6.13+bpo-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.6.13-1~bpo12+1 (2024-02-15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.493 MHz processor [ 0.002591] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002595] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008905] AGP: No AGP bridge found [ 0.008964] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008970] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008972] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010741] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010750] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016404] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] [ 0.016426] Using GB pages for direct mapping [ 0.016957] RAMDISK: [mem 0x2ddb3000-0x32ed0fff] [ 0.016966] ACPI: Early table checksum verification disabled [ 0.016969] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016974] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016980] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016985] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.016990] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016995] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016998] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017002] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017006] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017010] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017014] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017017] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017021] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017024] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] [ 0.017026] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] [ 0.017027] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] [ 0.017028] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] [ 0.017029] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] [ 0.017031] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] [ 0.017032] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] [ 0.017033] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] [ 0.017034] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] [ 0.017035] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] [ 0.017104] No NUMA configuration found [ 0.017105] Faking a node at [mem 0x0000000000000000-0x000000063effffff] [ 0.017117] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] [ 0.017504] Zone ranges: [ 0.017505] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017507] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017509] Normal [mem 0x0000000100000000-0x000000063effffff] [ 0.017511] Device empty [ 0.017512] Movable zone start for each node [ 0.017516] Early memory node ranges [ 0.017516] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.017518] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] [ 0.017520] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] [ 0.017521] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] [ 0.017522] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] [ 0.017523] node 0: [mem 0x0000000100001000-0x000000063effffff] [ 0.017527] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] [ 0.017534] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017580] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027673] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027699] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027713] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028596] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028654] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028880] ACPI: PM-Timer IO Port: 0x808 [ 0.028888] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028897] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028900] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028903] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028905] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028909] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028911] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028916] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.028935] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028937] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.028938] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028939] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028941] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] [ 0.028942] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] [ 0.028943] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] [ 0.028945] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] [ 0.028947] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.028949] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.028950] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.028951] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.028952] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.028953] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.028954] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.028955] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.028956] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.028957] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.028958] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.028959] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.028960] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.028961] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.028962] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.028962] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.028965] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028966] Booting paravirtualized kernel on bare hardware [ 0.028968] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034490] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035201] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.035210] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.035213] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035238] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro quiet [ 0.035290] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64", will be passed to user space. [ 0.041853] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045165] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045259] Fallback order for Node 0: 0 [ 0.045264] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.045266] Policy zone: Normal [ 0.045275] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045277] AGP: Checking aperture... [ 0.051579] AGP: No AGP bridge found [ 0.051581] AGP: Node 0: aperture [bus addr 0x34dc000000-0x34ddffffff] (32MB) [ 0.051583] Aperture beyond 4GB. Ignoring. [ 0.051583] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051584] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051585] AGP: This costs you 64MB of RAM [ 0.051588] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051591] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] [ 0.051653] software IO TLB: area num 8. [ 0.097826] Memory: 3162984K/25119580K available (16384K kernel code, 2363K rwdata, 10544K rodata, 3964K init, 3628K bss, 703312K reserved, 0K cma-reserved) [ 0.106950] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107138] ftrace: allocating 43115 entries in 169 pages [ 0.120335] ftrace: allocated 169 pages with 4 groups [ 0.121511] Dynamic Preempt: voluntary [ 0.121747] rcu: Preemptible hierarchical RCU implementation. [ 0.121748] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.121750] Trampoline variant of Tasks RCU enabled. [ 0.121751] Rude variant of Tasks RCU enabled. [ 0.121752] Tracing variant of Tasks RCU enabled. [ 0.121752] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.121753] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125992] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.126193] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.126317] spurious 8259A interrupt: IRQ7. [ 0.129592] Console: colour VGA+ 80x25 [ 0.129595] printk: console [tty0] enabled [ 0.129864] ACPI: Core revision 20230628 [ 0.130025] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.130038] APIC: Switch to symmetric I/O mode setup [ 0.130388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150038] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9744f8f5e, max_idle_ns: 440795332116 ns [ 0.150046] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.98 BogoMIPS (lpj=12373972) [ 0.150069] LVT offset 1 assigned for vector 0xf9 [ 0.150077] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150078] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150082] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150085] Spectre V2 : Mitigation: Retpolines [ 0.150086] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150087] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150088] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150089] RETBleed: Mitigation: untrained return thunk [ 0.150091] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150093] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150097] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150099] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150100] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150102] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150104] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.177090] Freeing SMP alternatives memory: 36K [ 0.177095] pid_max: default: 32768 minimum: 301 [ 0.177937] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.178196] landlock: Up and running. [ 0.178197] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.178225] AppArmor: AppArmor initialized [ 0.178227] TOMOYO Linux initialized [ 0.178234] LSM support for eBPF active [ 0.178616] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.178701] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.292688] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.292972] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292996] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293027] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293052] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.293082] ... version: 0 [ 0.293083] ... bit width: 48 [ 0.293084] ... generic registers: 6 [ 0.293085] ... value mask: 0000ffffffffffff [ 0.293086] ... max period: 00007fffffffffff [ 0.293087] ... fixed-purpose events: 0 [ 0.293088] ... event mask: 000000000000003f [ 0.293195] signal: max sigframe size: 1776 [ 0.293247] rcu: Hierarchical SRCU implementation. [ 0.293248] rcu: Max phase no-delay instances is 1000. [ 0.294042] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.294042] smp: Bringing up secondary CPUs ... [ 0.294042] smpboot: x86: Booting SMP configuration: [ 0.294042] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.324044] smp: Brought up 1 node, 8 CPUs [ 0.324044] smpboot: Max logical packages: 1 [ 0.324044] smpboot: Total of 8 processors activated (49495.88 BogoMIPS) [ 0.379092] node 0 deferred pages initialised in 52ms [ 0.382883] devtmpfs: initialized [ 0.382883] x86/mm: Memory block size: 128MB [ 0.386788] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.386788] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.386788] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386788] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.386788] pinctrl core: initialized pinctrl subsystem [ 0.387798] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.388636] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.390174] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.390960] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.391320] thermal_sys: Registered thermal governor 'fair_share' [ 0.391320] thermal_sys: Registered thermal governor 'bang_bang' [ 0.391320] thermal_sys: Registered thermal governor 'step_wise' [ 0.391320] thermal_sys: Registered thermal governor 'user_space' [ 0.391320] thermal_sys: Registered thermal governor 'power_allocator' [ 0.391320] cpuidle: using governor ladder [ 0.391320] cpuidle: using governor menu [ 0.391320] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.391320] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.391320] PCI: not using MMCONFIG [ 0.391320] PCI: Using configuration type 1 for base access [ 0.391320] PCI: Using configuration type 1 for extended access [ 0.391320] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.391320] mtrr: probably your BIOS does not setup all CPUs. [ 0.391320] mtrr: corrected configuration. [ 0.391320] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.391320] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391320] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.391320] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391320] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.391320] ACPI: Added _OSI(Module Device) [ 0.391320] ACPI: Added _OSI(Processor Device) [ 0.391320] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.391320] ACPI: Added _OSI(Processor Aggregator Device) [ 0.397527] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.398208] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.398309] ACPI: Interpreter enabled [ 0.398327] ACPI: PM: (supports S0 S3 S4 S5) [ 0.398329] ACPI: Using IOAPIC for interrupt routing [ 0.398481] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.398522] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.398535] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.398537] PCI: Using E820 reservations for host bridge windows [ 0.398683] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.405513] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.405519] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.405921] PCI host bridge to bus 0000:00 [ 0.405923] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.405926] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.405928] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.405930] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.405932] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.405934] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.405936] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.405957] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.406092] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.406111] pci 0000:00:02.0: enabling Extended Tags [ 0.406135] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.406237] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.406255] pci 0000:00:04.0: enabling Extended Tags [ 0.406279] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.406382] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.406400] pci 0000:00:05.0: enabling Extended Tags [ 0.406423] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.406545] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.406562] pci 0000:00:06.0: enabling Extended Tags [ 0.406586] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.406689] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.406706] pci 0000:00:09.0: enabling Extended Tags [ 0.406730] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.406827] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.406844] pci 0000:00:0a.0: enabling Extended Tags [ 0.406867] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.406972] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.406985] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] [ 0.406993] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] [ 0.407001] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] [ 0.407008] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] [ 0.407016] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] [ 0.407023] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.407041] pci 0000:00:11.0: set SATA to AHCI mode [ 0.407146] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.407159] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.407287] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.407301] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.407362] pci 0000:00:12.2: supports D1 D2 [ 0.407363] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.407458] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.407471] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.407610] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.407624] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.407684] pci 0000:00:13.2: supports D1 D2 [ 0.407686] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.407782] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.407909] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.407923] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] [ 0.407930] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] [ 0.407938] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] [ 0.407945] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] [ 0.407953] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] [ 0.407969] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.407970] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.407972] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.407974] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.408059] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.408076] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.408127] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.408218] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.408375] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.408506] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.408519] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.408652] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.408665] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.408805] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.408818] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.408879] pci 0000:00:16.2: supports D1 D2 [ 0.408880] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.408989] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.409049] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.409103] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.409161] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.409219] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.409273] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.409373] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 [ 0.409387] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.409397] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.409404] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.409411] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] [ 0.409417] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.409424] pci 0000:01:00.0: enabling Extended Tags [ 0.409443] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.409491] pci 0000:01:00.0: supports D1 D2 [ 0.409493] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.409552] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.409650] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.409664] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.409694] pci 0000:01:00.1: enabling Extended Tags [ 0.409737] pci 0000:01:00.1: supports D1 D2 [ 0.409827] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.409831] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.409834] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.409837] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.409890] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.409901] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] [ 0.409908] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] [ 0.409914] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] [ 0.409921] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] [ 0.409927] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] [ 0.409934] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] [ 0.409940] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] [ 0.409953] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.409978] pci 0000:02:00.0: PME# supported from D3hot [ 0.410061] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.410064] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.410067] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.410112] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.410130] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] [ 0.410167] pci 0000:03:00.0: enabling Extended Tags [ 0.410234] pci 0000:03:00.0: supports D1 D2 [ 0.410236] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.410335] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.410339] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.410387] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.410405] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] [ 0.410444] pci 0000:04:00.0: enabling Extended Tags [ 0.410489] pci 0000:04:00.0: supports D1 D2 [ 0.410491] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.410592] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.410596] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.410654] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.410674] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] [ 0.410683] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] [ 0.410759] pci 0000:05:00.0: supports D2 [ 0.410761] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.410868] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.410884] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] [ 0.410893] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] [ 0.410902] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] [ 0.410910] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] [ 0.410919] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] [ 0.410934] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] [ 0.410984] pci 0000:05:00.1: supports D2 [ 0.410986] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.422066] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.422072] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.422075] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.422136] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.422157] pci 0000:06:00.0: reg 0x10: [mem 0xd0310000-0xd031ffff 64bit pref] [ 0.422171] pci 0000:06:00.0: reg 0x18: [mem 0xd0300000-0xd030ffff 64bit pref] [ 0.422196] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] [ 0.422275] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.422448] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.422453] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.422456] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.422466] pci_bus 0000:07: extended config space not accessible [ 0.422500] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.422519] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] [ 0.422600] pci 0000:07:06.0: supports D1 D2 [ 0.422685] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.422691] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.422695] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.422697] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.422699] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.422701] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.422703] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.422705] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.423529] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.423595] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.423672] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.423739] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.423795] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.423839] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.423883] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.423927] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.424131] iommu: Default domain type: Translated [ 0.424131] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.424131] pps_core: LinuxPPS API ver. 1 registered [ 0.424131] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.424131] PTP clock support registered [ 0.424131] EDAC MC: Ver: 3.0.0 [ 0.424131] NetLabel: Initializing [ 0.424131] NetLabel: domain hash size = 128 [ 0.424131] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.424131] NetLabel: unlabeled traffic allowed by default [ 0.424131] PCI: Using ACPI for IRQ routing [ 0.431163] PCI: pci_cache_line_size set to 64 bytes [ 0.431224] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.431227] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] [ 0.431228] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] [ 0.431230] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.431231] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.431233] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] [ 0.431261] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.431261] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.431261] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.431261] vgaarb: loaded [ 0.431261] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.431261] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.432239] clocksource: Switched to clocksource tsc-early [ 0.432245] VFS: Disk quotas dquot_6.6.0 [ 0.432245] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.432245] AppArmor: AppArmor Filesystem Enabled [ 0.432245] pnp: PnP ACPI init [ 0.432245] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.432245] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.432245] system 00:03: [io 0x040b] has been reserved [ 0.432245] system 00:03: [io 0x04d6] has been reserved [ 0.432245] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.432245] system 00:03: [io 0x0c14] has been reserved [ 0.432245] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.432245] system 00:03: [io 0x0c52] has been reserved [ 0.432245] system 00:03: [io 0x0c6c] has been reserved [ 0.432245] system 00:03: [io 0x0c6f] has been reserved [ 0.432245] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.432245] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.432245] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.432245] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.432245] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.432245] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.432245] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.432245] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.432245] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.432245] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.432245] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.432245] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.432245] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.432245] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.432245] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.432245] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.432245] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.432245] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.432245] pnp 00:05: [dma 2] [ 0.432493] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.432770] pnp 00:09: [dma 0 disabled] [ 0.433048] pnp: PnP ACPI: found 10 devices [ 0.440275] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.440594] NET: Registered PF_INET protocol family [ 0.440979] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.445837] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.445909] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.446261] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.446928] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.447224] TCP: Hash tables configured (established 262144 bind 65536) [ 0.447622] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.447827] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.447976] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.448169] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.448183] NET: Registered PF_XDP protocol family [ 0.448209] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.448224] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.448228] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.448231] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.448235] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.448237] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.448240] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.448244] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.448247] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.448251] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.448253] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.448257] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.448259] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.448262] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.448266] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.448269] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.448271] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.448275] pci 0000:00:14.4: PCI bridge to [bus 07] [ 0.448279] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.448287] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.448289] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.448291] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.448293] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.448294] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.448296] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.448299] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.448300] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.448302] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.448304] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.448306] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.448308] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.448310] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.448312] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.448314] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.448315] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.448317] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.448319] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.448321] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 0.448323] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 0.448325] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 0.448326] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 0.448328] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.448330] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.470887] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 21966 usecs [ 0.490879] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.510878] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19332 usecs [ 0.530878] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19519 usecs [ 0.531120] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.531481] PCI: CLS 64 bytes, default 64 [ 0.531570] Trying to unpack rootfs image as initramfs... [ 0.532284] PCI-DMA: Disabling AGP. [ 0.532352] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.532354] PCI-DMA: using GART IOMMU. [ 0.532356] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.533223] software IO TLB: tearing down default memory pool [ 0.535812] LVT offset 0 assigned for vector 0x400 [ 0.540942] perf: AMD IBS detected (0x000000ff) [ 0.540950] amd_uncore: 4 amd_nb counters detected [ 0.547108] Initialise system trusted keyrings [ 0.547126] Key type blacklist registered [ 0.547192] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.547202] zbud: loaded [ 0.547602] fuse: init (API version 7.39) [ 0.547949] integrity: Platform Keyring initialized [ 0.547955] integrity: Machine keyring initialized [ 0.559597] Key type asymmetric registered [ 0.559601] Asymmetric key parser 'x509' registered [ 1.434734] Freeing initrd memory: 83064K [ 1.441387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.441468] io scheduler mq-deadline registered [ 1.443715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.443760] ACPI: \_PR_.P001: Found 2 idle states [ 1.443877] ACPI: \_PR_.P002: Found 2 idle states [ 1.443988] ACPI: \_PR_.P003: Found 2 idle states [ 1.444138] ACPI: \_PR_.P004: Found 2 idle states [ 1.444269] ACPI: \_PR_.P005: Found 2 idle states [ 1.444374] ACPI: \_PR_.P006: Found 2 idle states [ 1.444468] ACPI: \_PR_.P007: Found 2 idle states [ 1.444562] ACPI: \_PR_.P008: Found 2 idle states [ 1.444926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.445141] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.446047] Linux agpgart interface v0.103 [ 1.446116] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.447000] i8042: PNP: No PS/2 controller found. [ 1.447094] mousedev: PS/2 mouse device common for all mice [ 1.447116] rtc_cmos 00:06: RTC can wake from S4 [ 1.447331] rtc_cmos 00:06: registered as rtc0 [ 1.447355] rtc_cmos 00:06: setting system clock to 2024-05-23T11:21:19 UTC (1716463279) [ 1.447387] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.447399] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.447576] ledtrig-cpu: registered to indicate activity on CPUs [ 1.460057] NET: Registered PF_INET6 protocol family [ 1.466368] Segment Routing with IPv6 [ 1.466386] In-situ OAM (IOAM) with IPv6 [ 1.466410] mip6: Mobile IPv6 [ 1.466415] NET: Registered PF_PACKET protocol family [ 1.466552] mpls_gso: MPLS GSO support [ 1.466568] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.467142] microcode: microcode updated early to new patch_level=0x0600063e [ 1.467191] microcode: CPU0: patch_level=0x0600063e [ 1.467190] microcode: CPU1: patch_level=0x0600063e [ 1.467191] microcode: CPU2: patch_level=0x0600063e [ 1.467192] microcode: CPU3: patch_level=0x0600063e [ 1.467194] microcode: CPU5: patch_level=0x0600063e [ 1.467194] microcode: CPU4: patch_level=0x0600063e [ 1.467196] microcode: CPU7: patch_level=0x0600063e [ 1.467196] microcode: CPU6: patch_level=0x0600063e [ 1.473331] microcode: CPU1: new patch_level=0x0600063e [ 1.479466] microcode: CPU3: new patch_level=0x0600063e [ 1.479468] microcode: CPU2: new patch_level=0x0600063e [ 1.479468] microcode: CPU7: new patch_level=0x0600063e [ 1.479469] microcode: CPU6: new patch_level=0x0600063e [ 1.479475] microcode: CPU0: new patch_level=0x0600063e [ 1.479477] microcode: CPU4: new patch_level=0x0600063e [ 1.479481] microcode: CPU5: new patch_level=0x0600063e [ 1.479511] microcode: Microcode Update Driver: v2.2. [ 1.479519] IPI shorthand broadcast: enabled [ 1.488174] sched_clock: Marking stable (1484057330, 3806756)->(1509952085, -22087999) [ 1.488398] registered taskstats version 1 [ 1.488522] Loading compiled-in X.509 certificates [ 1.516187] Loaded X.509 cert 'Build time autogenerated kernel key: e89427945035c8dcb005e1ccdc6183fd860e9aa0' [ 1.518921] Key type .fscrypt registered [ 1.518923] Key type fscrypt-provisioning registered [ 1.524433] Key type encrypted registered [ 1.524439] AppArmor: AppArmor sha1 policy hashing enabled [ 1.524457] ima: No TPM chip found, activating TPM-bypass! [ 1.524460] ima: Allocated hash algorithm: sha256 [ 1.524472] ima: No architecture policies found [ 1.524485] evm: Initialising EVM extended attributes: [ 1.524486] evm: security.selinux [ 1.524487] evm: security.SMACK64 (disabled) [ 1.524488] evm: security.SMACK64EXEC (disabled) [ 1.524489] evm: security.SMACK64TRANSMUTE (disabled) [ 1.524490] evm: security.SMACK64MMAP (disabled) [ 1.524491] evm: security.apparmor [ 1.524492] evm: security.ima [ 1.524493] evm: security.capability [ 1.524494] evm: HMAC attrs: 0x1 [ 1.567839] tsc: Refined TSC clocksource calibration: 3093.303 MHz [ 1.567847] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c96915f3d1, max_idle_ns: 440795271230 ns [ 1.567938] clocksource: Switched to clocksource tsc [ 1.701671] RAS: Correctable Errors collector initialized. [ 1.701762] clk: Disabling unused clocks [ 1.704021] Freeing unused decrypted memory: 2028K [ 1.705089] Freeing unused kernel image (initmem) memory: 3964K [ 1.715989] Write protecting the kernel read-only data: 28672k [ 1.716847] Freeing unused kernel image (rodata/data gap) memory: 1744K [ 1.779469] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.779475] Run /init as init process [ 1.779477] with arguments: [ 1.779478] /init [ 1.779479] with environment: [ 1.779480] HOME=/ [ 1.779481] TERM=linux [ 1.779482] BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 [ 1.933301] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.933372] ACPI: button: Power Button [PWRB] [ 1.933463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.952325] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.952337] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.955625] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.959184] ACPI: button: Power Button [PWRF] [ 1.963497] Floppy drive(s): fd0 is 1.44M [ 1.972663] SCSI subsystem initialized [ 1.984598] FDC 0 is a post-1991 82077 [ 1.989729] ACPI: bus type USB registered [ 1.989775] usbcore: registered new interface driver usbfs [ 1.989795] usbcore: registered new interface driver hub [ 1.989828] usbcore: registered new device driver usb [ 2.024532] ACPI: bus type drm_connector registered [ 2.037770] libata version 3.00 loaded. [ 2.046545] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address XXX [ 2.046555] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.046560] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.046566] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.046787] QUIRK: Enable AMD PLL fix [ 2.046819] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.046827] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.046834] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.046842] ehci-pci 0000:00:12.2: debug port 1 [ 2.046888] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.048513] scsi host0: pata_atiixp [ 2.048899] scsi host1: pata_atiixp [ 2.048958] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.048960] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.052916] pata_via 0000:05:00.1: version 0.3.4 [ 2.053571] scsi host2: pata_via [ 2.053736] scsi host3: pata_via [ 2.053794] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 [ 2.053796] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 [ 2.063840] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.063911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.063915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.063917] usb usb1: Product: EHCI Host Controller [ 2.063919] usb usb1: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.063920] usb usb1: SerialNumber: ... [ 2.064080] hub 1-0:1.0: USB hub found [ 2.064089] hub 1-0:1.0: 5 ports detected [ 2.064320] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.064325] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.064333] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.064341] ehci-pci 0000:00:13.2: debug port 1 [ 2.064371] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.079928] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.080051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.080054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.080057] usb usb2: Product: EHCI Host Controller [ 2.080058] usb usb2: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.080060] usb usb2: SerialNumber: ... [ 2.080205] hub 2-0:1.0: USB hub found [ 2.080214] hub 2-0:1.0: 5 ports detected [ 2.080419] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.080424] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.080428] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.080436] ehci-pci 0000:00:16.2: debug port 1 [ 2.080464] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.099827] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.099891] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.099937] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.099940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.099942] usb usb3: Product: EHCI Host Controller [ 2.099944] usb usb3: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.099946] usb usb3: SerialNumber: ... [ 2.100123] hub 3-0:1.0: USB hub found [ 2.100131] hub 3-0:1.0: 4 ports detected [ 2.219705] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.219710] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.219716] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.219720] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.219721] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.225720] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.226858] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.359913] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 2.430028] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.434512] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.434526] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.434566] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.436338] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.436346] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.436411] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.436614] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.436618] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 2.436622] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.436814] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.436819] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.436821] usb usb5: Product: xHCI Host Controller [ 2.436824] usb usb5: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.436826] usb usb5: SerialNumber: ... [ 2.437005] hub 5-0:1.0: USB hub found [ 2.437016] hub 5-0:1.0: 2 ports detected [ 2.437204] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.437262] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.437265] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.437268] usb usb6: Product: xHCI Host Controller [ 2.437270] usb usb6: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.437271] usb usb6: SerialNumber: ... [ 2.437328] ahci 0000:00:11.0: version 3.0 [ 2.437528] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.437532] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.438250] hub 6-0:1.0: USB hub found [ 2.438264] hub 6-0:1.0: 2 ports detected [ 2.438504] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.438510] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.438566] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.438749] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.438753] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.438756] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.438808] scsi host4: ahci [ 2.438959] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.438963] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.438966] usb usb7: Product: xHCI Host Controller [ 2.438968] usb usb7: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.438970] usb usb7: SerialNumber: ... [ 2.439042] scsi host5: ahci [ 2.439257] scsi host6: ahci [ 2.439406] hub 7-0:1.0: USB hub found [ 2.439419] hub 7-0:1.0: 2 ports detected [ 2.439591] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.439646] scsi host7: ahci [ 2.439750] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.439754] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.439757] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.439759] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.439784] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.439788] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.439791] usb usb8: Product: xHCI Host Controller [ 2.439793] usb usb8: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.439795] usb usb8: SerialNumber: ... [ 2.439968] hub 8-0:1.0: USB hub found [ 2.439980] hub 8-0:1.0: 2 ports detected [ 2.440176] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.440181] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.440719] scsi host8: ahci [ 2.441010] scsi host9: ahci [ 2.441093] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 [ 2.441097] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 [ 2.496067] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.496072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.496074] usb usb4: Product: OHCI PCI host controller [ 2.496076] usb usb4: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.496078] usb usb4: SerialNumber: ... [ 2.496230] hub 4-0:1.0: USB hub found [ 2.496241] hub 4-0:1.0: 5 ports detected [ 2.496631] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.496638] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.496659] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.516811] usb 3-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.516816] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.516819] usb 3-2: Product: 802.11n NIC [ 2.516820] usb 3-2: Manufacturer: Realtek [ 2.516822] usb 3-2: SerialNumber: ... [ 2.564014] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.564018] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.564021] usb usb9: Product: OHCI PCI host controller [ 2.564022] usb usb9: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.564023] usb usb9: SerialNumber: ... [ 2.564175] hub 9-0:1.0: USB hub found [ 2.564184] hub 9-0:1.0: 5 ports detected [ 2.564577] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.564584] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.564604] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.624264] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.637518] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.637522] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.637524] usb usb10: Product: OHCI PCI host controller [ 2.637526] usb usb10: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.637527] usb usb10: SerialNumber: ... [ 2.637671] hub 10-0:1.0: USB hub found [ 2.637680] hub 10-0:1.0: 2 ports detected [ 2.637981] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.637988] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.638008] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.705513] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.705518] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.705521] usb usb11: Product: OHCI PCI host controller [ 2.705523] usb usb11: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.705524] usb usb11: SerialNumber: ... [ 2.705686] hub 11-0:1.0: USB hub found [ 2.705696] hub 11-0:1.0: 4 ports detected [ 2.755606] ata7: SATA link down (SStatus 0 SControl 300) [ 2.755698] ata10: SATA link down (SStatus 0 SControl 330) [ 2.791914] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 2.859911] usb 9-1: new low-speed USB device number 2 using ohci-pci [ 2.915924] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.915935] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.915958] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.915989] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.916079] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.916108] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.916211] ata6.00: configured for UDMA/133 [ 2.917093] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.917242] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 2.917376] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.917771] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.917983] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.918799] ata8.00: configured for UDMA/133 [ 2.918875] ata9.00: configured for UDMA/133 [ 2.920169] ata5.00: configured for UDMA/133 [ 2.920293] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 2.920821] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.925226] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.978070] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.988012] usb 4-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 2.988019] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.988022] usb 4-1: Product: USB Device [ 2.988025] usb 4-1: Manufacturer: COMPANY [ 3.009039] hid: raw HID events driver (C) Jiri Kosina [ 3.029238] usbcore: registered new interface driver usbhid [ 3.029241] usbhid: USB HID core driver [ 3.058940] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.058945] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.058979] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.112494] sd 0:0:0:0: [sda] Write Protect is off [ 3.112498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.112517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.112544] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.112829] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.113053] sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.113061] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.113066] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 3.113072] sd 5:0:0:0: [sdb] Write Protect is off [ 3.113076] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.113081] sd 4:0:0:0: [sdc] Write Protect is off [ 3.113085] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.113101] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.113108] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.113141] sd 4:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 3.113142] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 3.113776] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.113800] sda: sda1 sda2 sda3 [ 3.113968] sdb: sdb1 sdb2 [ 3.113977] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.114119] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.148137] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.182170] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.182331] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.182335] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.182346] sd 8:0:0:0: [sdd] Write Protect is off [ 3.182349] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.182367] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.182393] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.199924] sdd: sdd1 sdd2 [ 3.200192] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 3.377156] sdc: sdc1 sdc2 sdc3 [ 3.377463] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.386149] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.448201] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.448391] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 3.448482] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.448807] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 3.488625] usb 2-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.488631] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.488633] usb 2-2: SerialNumber: ... [ 3.491920] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 3.508020] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.508168] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.728065] usb 4-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.728072] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.728074] usb 4-2: Product: A4Tech Gaming Mouse [ 3.728076] usb 4-2: Manufacturer: PixArt [ 3.734364] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:09DA:3519.0004/input/input6 [ 3.734461] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.738553] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:09DA:3519.0005/input/input8 [ 3.796124] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 4.466172] usb 9-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.466185] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.466191] usb 9-1: Product: NOVA AVR [ 4.466195] usb 9-1: Manufacturer: MGE UPS SYSTEMS [ 6.496337] [drm] amdgpu kernel modesetting enabled. [ 6.496461] amdgpu: Virtual CRAT table created for CPU [ 6.496482] amdgpu: Topology: Add CPU node [ 6.496772] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 6.496799] [drm] register mmio base: 0xFEA00000 [ 6.496801] [drm] register mmio size: 262144 [ 6.496871] [drm] add ip block number 0 <vi_common> [ 6.496874] [drm] add ip block number 1 <gmc_v8_0> [ 6.496876] [drm] add ip block number 2 <tonga_ih> [ 6.496877] [drm] add ip block number 3 <gfx_v8_0> [ 6.496879] [drm] add ip block number 4 <sdma_v3_0> [ 6.496880] [drm] add ip block number 5 <powerplay> [ 6.496882] [drm] add ip block number 6 <dm> [ 6.496884] [drm] add ip block number 7 <uvd_v6_0> [ 6.496885] [drm] add ip block number 8 <vce_v3_0> [ 6.497073] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 6.497132] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 6.497136] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 6.497155] [drm] UVD is enabled in VM mode [ 6.497156] [drm] UVD ENC is enabled in VM mode [ 6.497158] [drm] VCE enabled in VM mode [ 6.497194] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 6.498254] Console: switching to colour dummy device 80x25 [ 6.498260] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 6.498262] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 6.498312] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 6.498364] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 6.498634] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 6.498637] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 6.498644] [drm] Detected VRAM RAM=8192M, BAR=256M [ 6.498646] [drm] RAM width 256bits GDDR5 [ 6.498764] [drm] amdgpu: 8192M of VRAM memory ready [ 6.498772] [drm] amdgpu: 11998M of GTT memory ready. [ 6.498794] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 6.499164] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 6.499314] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 6.499481] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 6.499650] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 6.499727] [drm] Chained IB support enabled! [ 6.499756] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 6.500088] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 6.502018] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 6.504804] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 6.504939] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 6.505070] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 6.505273] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 6.508226] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 6.508865] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 6.510171] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 6.511244] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 6.821816] [drm] Display Core v3.2.247 initialized on DCE 11.2 [ 6.884208] [drm] UVD and UVD ENC initialized successfully. [ 6.994140] [drm] VCE initialized successfully. [ 6.994737] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 6.994751] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 6.998820] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 6.999736] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-1/input0 [ 7.000573] [drm] Initialized amdgpu 3.54.0 20150101 for 0000:01:00.0 on minor 0 [ 7.015150] fbcon: amdgpudrmfb (fb0) is primary device [ 7.106675] Console: switching to colour frame buffer device 160x64 [ 7.140498] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 7.327889] raid6: sse2x4 gen() 12165 MB/s [ 7.395825] raid6: sse2x2 gen() 11428 MB/s [ 7.463885] raid6: sse2x1 gen() 7814 MB/s [ 7.463887] raid6: using algorithm sse2x4 gen() 12165 MB/s [ 7.531824] raid6: .... xor() 4489 MB/s, rmw enabled [ 7.531827] raid6: using ssse3x2 recovery algorithm [ 7.537681] xor: automatically using best checksumming function avx [ 7.542996] async_tx: api initialized (async) [ 7.837455] Btrfs loaded, zoned=yes, fsverity=yes [ 20.632412] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 20.632470] floppy: error 10 while reading block 0 [ 23.584604] EXT4-fs (sdc3): mounted filesystem HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro with ordered data mode. Quota mode: none. [ 23.952839] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 24.359327] random: crng init done [ 25.627495] systemd[1]: RTC configured in localtime, applying delta of 300 minutes to system time. [ 26.104955] systemd[1]: Inserted module 'autofs4' [ 26.403002] systemd[1]: systemd 254.5-1~bpo12+3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 26.403009] systemd[1]: Detected architecture x86-64. [ 26.442722] systemd[1]: Hostname set to ... [ 30.868090] systemd[1]: Queued start job for default target graphical.target. [ 30.885305] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 30.885728] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 30.886110] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver. [ 30.886494] systemd[1]: Created slice system-tor.slice - Slice /system/tor. [ 30.886777] systemd[1]: Created slice user.slice - User and Session Slice. [ 30.886861] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 30.887081] systemd[1]: Set up automount ... [ 30.887127] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 30.887183] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 30.887200] systemd[1]: Reached target slices.target - Slice Units. [ 30.887228] systemd[1]: Reached target swap.target - Swaps. [ 30.887254] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 30.887347] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 30.887489] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 30.887605] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 30.887669] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 30.887879] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 30.888059] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 30.897271] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 30.897414] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 30.898464] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 30.899502] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 30.900829] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 30.902073] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 30.902363] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 30.922045] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 30.923243] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 30.924773] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 30.926197] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 30.927659] systemd[1]: Starting XXX@XXX - Load Kernel Module dm_mod... [ 30.929124] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 30.930584] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 30.932073] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 30.933511] systemd[1]: Starting XXX@XXX - Load Kernel Module loop... [ 30.933862] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 30.936018] systemd[1]: Starting systemd-journald.service - Journal Service... [ 30.995951] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 30.996000] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-HASH_466-8928-06B7-84F7-7C8411FA7941). [ 30.997282] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 30.998650] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 31.084893] systemd[1]: XXX@XXX: Deactivated successfully. [ 31.085108] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs. [ 31.108059] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 31.108455] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 31.110056] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 31.181745] systemd[1]: XXX@XXX: Deactivated successfully. [ 31.181955] systemd[1]: Finished XXX@XXX - Load Kernel Module drm. [ 31.182390] systemd[1]: XXX@XXX: Deactivated successfully. [ 31.182576] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse. [ 31.190861] systemd-journald[437]: Collecting audit messages is disabled. [ 31.216084] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 31.256859] loop: module loaded [ 31.257602] systemd[1]: XXX@XXX: Deactivated successfully. [ 31.257824] systemd[1]: Finished XXX@XXX - Load Kernel Module loop. [ 31.330766] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 31.331009] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 31.331227] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 31.331430] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 31.331638] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 31.371980] systemd[1]: Started systemd-journald.service - Journal Service. [ 31.455668] EXT4-fs (sdc3): re-mounted HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 r/w. Quota mode: none. [ 31.707548] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 31.707586] device-mapper: uevent: version 1.0.3 [ 31.707699] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 31.726999] systemd-journald[437]: Received client request to flush runtime journal. [ 32.722683] lp: driver loaded but no devices found [ 32.898236] ppdev: user-space parallel port driver [ 34.187314] systemd-journald[437]: /var/log/journal/f15179d86e23444a937404d12eeb5157/system.journal: Journal file uses a different sequence number ID, rotating. [ 34.187331] systemd-journald[437]: Rotating system journal. [ 42.237151] acpi_cpufreq: overriding BIOS provided _PSD data [ 42.394189] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 42.394671] cryptd: max_cpu_qlen set to 1000 [ 42.790524] AVX version of gcm_enc/dec engaged. [ 42.790584] AES CTR mode by8 optimization enabled [ 43.091551] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.091598] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 43.091639] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 43.091680] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 43.091720] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 43.091762] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 43.194293] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 43.194398] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 43.194543] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 43.361906] mc: Linux media interface: v0.10 [ 44.012787] videodev: Linux video capture interface: v2.00 [ 44.674653] kvm_amd: TSC scaling supported [ 44.674658] kvm_amd: Nested Virtualization enabled [ 44.674659] kvm_amd: Nested Paging enabled [ 44.674664] kvm_amd: LBR virtualization supported [ 44.720298] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 44.720433] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 44.720440] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] [ 44.720457] saa7134: saa7133[0]: board init: gpio is 40000 [ 44.842876] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 44.844495] Registered IR keymap rc-avermedia-m135a [ 44.869358] MCE: In-kernel MCE decoding enabled. [ 44.940545] IR NEC protocol handler initialized [ 44.972017] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 44.972088] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 44.972152] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 45.135912] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 45.135922] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 45.135926] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 45.135929] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135932] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 45.135934] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135937] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135939] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135942] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135944] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135947] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135950] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135952] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135955] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135957] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.135960] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.220072] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 45.226045] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 45.226240] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 45.226396] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 45.231789] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 45.232203] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 45.232352] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 45.407924] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 45.407931] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.407933] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 45.407936] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 45.407938] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 45.407939] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 45.407941] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 45.407943] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 45.407945] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 45.426240] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 45.426438] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 45.426632] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 45.426807] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 45.427010] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 45.427188] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 45.427361] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 45.427554] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 46.107883] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 46.219852] tda829x 13-004b: setting tuner address to 60 [ 46.380803] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 46.395747] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 46.396201] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 46.396482] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 46.396759] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 46.427828] tda829x 13-004b: type set to tda8290+75a [ 46.587980] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 46.632825] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 47.595916] usb 2-2: set resolution quirk: cval->res = 384 [ 47.596861] usbcore: registered new interface driver snd-usb-audio [ 47.596989] usb 2-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 47.635025] usbcore: registered new interface driver uvcvideo [ 47.720661] usb 3-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 47.720675] usb 3-2: RTL8188EU MAC: XXX [ 47.720681] usb 3-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 47.969871] usb 3-2: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 47.970227] usb 3-2: Firmware revision 11.1 (signature 0x88e1) [ 48.558287] usbcore: registered new interface driver rtl8xxxu [ 48.682471] rtl8xxxu 3-2:1.0 wlxd037459855f3: renamed from wlan0 [ 49.398831] alsactl[1302]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 50.700666] saa7134: saa7133[0]: registered device video2 [v4l2] [ 50.700778] saa7134: saa7133[0]: registered device vbi0 [ 50.700890] saa7134: saa7133[0]: registered device radio0 [ 50.723919] rc rc0: two consecutive events of type space [ 50.764337] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 50.764427] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 57.077704] Process accounting resumed [ 58.780135] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 78.152169] NET: Registered PF_QIPCRTR protocol family [ 80.350382] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 80.350404] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 80.350417] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 83.036295] wlxd037459855f3: authenticate with XXX [ 83.041561] wlxd037459855f3: send auth to XXX (try 1/3) [ 83.046965] wlxd037459855f3: authenticated [ 83.048102] wlxd037459855f3: associate with XXX (try 1/3) [ 83.055527] wlxd037459855f3: RX AssocResp from XXX (capab=0x1c11 status=0 aid=6) [ 83.057301] usb 3-2: rtl8xxxu_bss_info_changed: HT supported [ 83.059555] wlxd037459855f3: associated [ 83.141425] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [ 95.552460] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 110.116268] systemd-journald[437]: Time jumped backwards, rotating. [ 356.089963] Process accounting resumed [ 2221.317135] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 2221.317153] floppy: error 10 while reading block 0 [ 2254.951930] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 2255.127423] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2255.431013] QNX4 filesystem 0.2.3 registered. [ 2753.205607] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 2759.373714] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 5244.333213] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 5244.333232] floppy: error 10 while reading block 0 [ 6452.038310] Non-volatile memory driver v1.3 [ 6457.465028] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 6464.436775] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 6464.436793] floppy: error 10 while reading block 0 [ 6478.257080] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 6478.257098] floppy: error 10 while reading block 0