[ 0.230307] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.231298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.232243] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.234284] ipmi:dmi: Base address is zero, assuming no IPMI interface [ 0.234320] ACPI: Added _OSI(Module Device) [ 0.234322] ACPI: Added _OSI(Processor Device) [ 0.234323] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.234324] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234325] ACPI: Added _OSI(Linux-Dell-Video) [ 0.234326] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.234328] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.246325] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.248935] ACPI: Dynamic OEM Table Load: [ 0.248947] ACPI: SSDT 0xFFFF976BBCDB6000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.250321] ACPI: Dynamic OEM Table Load: [ 0.250329] ACPI: SSDT 0xFFFF976BBCDBDC00 000303 (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.251339] ACPI: Dynamic OEM Table Load: [ 0.251345] ACPI: SSDT 0xFFFF976BBCFD9800 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.253540] ACPI: EC: EC started [ 0.253541] ACPI: EC: interrupt blocked [ 0.253731] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.253734] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.253735] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.253736] ACPI: Interpreter enabled [ 0.253769] ACPI: (supports S0 S3 S4 S5) [ 0.253770] ACPI: Using IOAPIC for interrupt routing [ 0.253812] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.254223] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.265812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.265820] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.266099] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.267008] PCI host bridge to bus 0000:00 [ 0.267011] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.267012] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.267014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.267016] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window] [ 0.267018] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.267031] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.267154] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.267168] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.267175] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.267180] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.267367] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.267395] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit] [ 0.267476] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.267598] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.267627] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit] [ 0.267712] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.267826] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.267851] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff] [ 0.267946] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.268066] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.268091] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit] [ 0.268181] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.268302] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.268414] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.268540] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.268650] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.268788] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.268814] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff] [ 0.268909] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.269026] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.269254] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.269275] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.269284] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.269293] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.269302] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.269310] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.269319] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff] [ 0.269369] pci 0000:00:1f.2: PME# supported from D3hot [ 0.269478] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.269500] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit] [ 0.269523] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.269794] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.269926] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.270051] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.270128] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.270577] pci 0000:01:00.0: supports D1 D2 [ 0.270578] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271021] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.271026] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.271034] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.271135] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.271212] pci 0000:02:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit] [ 0.271324] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.271493] pci 0000:02:00.0: supports D1 D2 [ 0.271494] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271709] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.271715] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.354621] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.354736] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.354844] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.354953] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.355060] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.355168] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.355276] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.355384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.355651] ACPI: EC: interrupt unblocked [ 0.355662] ACPI: EC: event unblocked [ 0.355669] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.355671] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.355775] iommu: Default domain type: Translated [ 0.355775] SCSI subsystem initialized [ 0.355775] libata version 3.00 loaded. [ 0.355775] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.355775] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.355775] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.355775] vgaarb: loaded [ 0.355775] ACPI: bus type USB registered [ 0.355775] usbcore: registered new interface driver usbfs [ 0.355775] usbcore: registered new interface driver hub [ 0.355775] usbcore: registered new device driver usb [ 0.355775] pps_core: LinuxPPS API ver. 1 registered [ 0.355775] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.355775] PTP clock support registered [ 0.355775] EDAC MC: Ver: 3.0.0 [ 0.355775] PCI: Using ACPI for IRQ routing [ 0.359830] PCI: pci_cache_line_size set to 64 bytes [ 0.359892] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.359894] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.359895] e820: reserve RAM buffer [mem 0x9ffb0000-0x9fffffff] [ 0.359896] e820: reserve RAM buffer [mem 0xaa3bf000-0xabffffff] [ 0.359898] e820: reserve RAM buffer [mem 0xab000000-0xabffffff] [ 0.359899] e820: reserve RAM buffer [mem 0x44f600000-0x44fffffff] [ 0.360045] NetLabel: Initializing [ 0.360046] NetLabel: domain hash size = 128 [ 0.360046] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.360066] NetLabel: unlabeled traffic allowed by default [ 0.362613] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.362619] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.366170] clocksource: Switched to clocksource tsc-early [ 0.383696] *** VALIDATE bpf *** [ 0.383805] VFS: Disk quotas dquot_6.6.0 [ 0.383830] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.383862] *** VALIDATE ramfs *** [ 0.383867] *** VALIDATE hugetlbfs *** [ 0.383973] AppArmor: AppArmor Filesystem Enabled [ 0.384013] pnp: PnP ACPI init [ 0.384226] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.384228] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.384230] system 00:00: [io 0xffff] has been reserved [ 0.384232] system 00:00: [io 0xffff] has been reserved [ 0.384234] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.384236] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.384238] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.384239] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.384241] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 0.384249] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.384286] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384373] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.384378] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.384422] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.384462] pnp 00:04: Plug and Play ACPI device, IDs DLL0597 PNP0f13 (active) [ 0.466445] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.466447] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.466449] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.466451] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.466453] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.466455] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.466456] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.466460] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 0.466462] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 0.466464] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.466466] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.466471] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.466962] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.466964] system 00:06: [mem 0x40004000-0x40004fff] has been reserved [ 0.466969] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.466999] pnp: PnP ACPI: found 7 devices [ 0.468755] thermal_sys: Registered thermal governor 'fair_share' [ 0.468756] thermal_sys: Registered thermal governor 'bang_bang' [ 0.468757] thermal_sys: Registered thermal governor 'step_wise' [ 0.468758] thermal_sys: Registered thermal governor 'user_space' [ 0.468759] thermal_sys: Registered thermal governor 'power_allocator' [ 0.473262] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.473307] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.473317] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.473321] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.473331] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.473344] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0580000-0xc058ffff pref] [ 0.473346] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.473352] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.473364] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.473365] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.473367] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.473368] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window] [ 0.473370] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.473372] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.473373] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.473515] NET: Registered protocol family 2 [ 0.473752] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.473865] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.474200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.474324] TCP: Hash tables configured (established 131072 bind 65536) [ 0.474389] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.474452] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.474547] NET: Registered protocol family 1 [ 0.474553] NET: Registered protocol family 44 [ 0.474566] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.494325] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 17722 usecs [ 0.518319] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23410 usecs [ 0.518344] PCI: CLS 64 bytes, default 64 [ 0.518404] Trying to unpack rootfs image as initramfs... [ 0.693286] Freeing initrd memory: 48368K [ 0.693353] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.693355] software IO TLB: mapped [mem 0xa63bf000-0xaa3bf000] (64MB) [ 0.693630] check: Scanning for low memory corruption every 60 seconds [ 0.696461] Initialise system trusted keyrings [ 0.696471] Key type blacklist registered [ 0.696514] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.698324] zbud: loaded [ 0.698826] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.699043] fuse: init (API version 7.31) [ 0.699065] *** VALIDATE fuse *** [ 0.699067] *** VALIDATE fuse *** [ 0.699196] Platform Keyring initialized [ 0.706716] Key type asymmetric registered [ 0.706717] Asymmetric key parser 'x509' registered [ 0.706728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.706785] io scheduler mq-deadline registered [ 0.707478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.707549] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.707550] vesafb: scrolling: redraw [ 0.707552] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.707574] vesafb: framebuffer at 0xb0000000, mapped to 0x(____ptrval____), using 4160k, total 4160k [ 0.707629] fbcon: Deferring console take-over [ 0.707630] fb0: VESA VGA frame buffer device [ 0.707647] intel_idle: MWAIT substates: 0x21120 [ 0.707648] intel_idle: v0.4.1 model 0x3A [ 0.707885] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.708071] ACPI: AC Adapter [ACAD] (on-line) [ 0.708151] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0 [ 0.708176] ACPI: Power Button [PWRB] [ 0.708233] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.708277] ACPI: Lid Switch [LID0] [ 0.708316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.708350] ACPI: Power Button [PWRF] [ 0.709000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.711283] Linux agpgart interface v0.103 [ 0.713951] loop: module loaded [ 0.714222] libphy: Fixed MDIO Bus: probed [ 0.714224] tun: Universal TUN/TAP device driver, 1.6 [ 0.714278] PPP generic driver version 2.4.2 [ 0.714387] VFIO - User Level meta-driver version: 0.3 [ 0.714485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.714488] ehci-pci: EHCI PCI platform driver [ 0.714664] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.714671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.714687] ehci-pci 0000:00:1a.0: debug port 2 [ 0.718597] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.718613] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000 [ 0.734275] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.734460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.734463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.734465] usb usb1: Product: EHCI Host Controller [ 0.734466] usb usb1: Manufacturer: Linux 5.4.0-39-generic ehci_hcd [ 0.734467] usb usb1: SerialNumber: ... [ 0.734770] hub 1-0:1.0: USB hub found [ 0.734828] hub 1-0:1.0: 2 ports detected [ 0.735499] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.735507] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.735522] ehci-pci 0000:00:1d.0: debug port 2 [ 0.739441] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.739461] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000 [ 0.754270] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.754359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.754361] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.754363] usb usb2: Product: EHCI Host Controller [ 0.754364] usb usb2: Manufacturer: Linux 5.4.0-39-generic ehci_hcd [ 0.754365] usb usb2: SerialNumber: ... [ 0.754588] hub 2-0:1.0: USB hub found [ 0.754601] hub 2-0:1.0: 2 ports detected [ 0.754840] ehci-platform: EHCI generic platform driver [ 0.754862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.754871] ohci-pci: OHCI PCI platform driver [ 0.754887] ohci-platform: OHCI generic platform driver [ 0.754901] uhci_hcd: USB Universal Host Controller Interface driver [ 0.755170] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.755179] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.756252] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 0.756259] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.756450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.756452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.756453] usb usb3: Product: xHCI Host Controller [ 0.756455] usb usb3: Manufacturer: Linux 5.4.0-39-generic xhci-hcd [ 0.756456] usb usb3: SerialNumber: ... [ 0.756610] hub 3-0:1.0: USB hub found [ 0.756623] hub 3-0:1.0: 4 ports detected [ 0.757232] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.757236] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.757239] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.757283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.757285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.757286] usb usb4: Product: xHCI Host Controller [ 0.757288] usb usb4: Manufacturer: Linux 5.4.0-39-generic xhci-hcd [ 0.757289] usb usb4: SerialNumber: ... [ 0.757410] hub 4-0:1.0: USB hub found [ 0.757421] hub 4-0:1.0: 4 ports detected [ 0.758029] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.776974] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.776980] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.777134] mousedev: PS/2 mouse device common for all mice [ 0.777437] rtc_cmos 00:01: RTC can wake from S4 [ 0.777644] rtc_cmos 00:01: registered as rtc0 [ 0.777662] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.777671] i2c /dev entries driver [ 0.777725] device-mapper: uevent: version 1.0.3 [ 0.777805] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.777828] platform eisa.0: Probing EISA bus 0 [ 0.777830] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.777832] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.777833] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.777835] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.777836] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.777837] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.777838] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.777840] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.777841] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.777842] platform eisa.0: EISA: Detected 0 cards [ 0.777851] intel_pstate: Intel P-state driver initializing [ 0.778098] ledtrig-cpu: registered to indicate activity on CPUs [ 0.778178] drop_monitor: Initializing network drop monitor service [ 0.778385] NET: Registered protocol family 10 [ 0.791533] Segment Routing with IPv6 [ 0.791566] NET: Registered protocol family 17 [ 0.791688] Key type dns_resolver registered [ 0.792282] RAS: Correctable Errors collector initialized. [ 0.792323] microcode: sig=0x306a9, pf=0x10, revision=0x21 [ 0.792389] microcode: Microcode Update Driver: v2.2. [ 0.792394] IPI shorthand broadcast: enabled [ 0.792409] sched_clock: Marking stable (792070088, 312604)->(806892768, -14510076) [ 0.792526] registered taskstats version 1 [ 0.792536] Loading compiled-in X.509 certificates [ 0.795625] Loaded X.509 cert 'Build time autogenerated kernel key: fc5d997396576c92a1f0014cbc11f394a5a98020' [ 0.795668] zswap: loaded using pool lzo/zbud [ 0.795814] Key type ._fscrypt registered [ 0.795815] Key type .fscrypt registered [ 0.795939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.808260] Key type big_key registered [ 0.813912] Key type encrypted registered [ 0.813916] AppArmor: AppArmor sha1 policy hashing enabled [ 0.813926] ima: No TPM chip found, activating TPM-bypass! [ 0.813933] ima: Allocated hash algorithm: sha1 [ 0.813941] ima: No architecture policies found [ 0.813951] evm: Initialising EVM extended attributes: [ 0.813952] evm: security.selinux [ 0.813953] evm: security.SMACK64 [ 0.813953] evm: security.SMACK64EXEC [ 0.813954] evm: security.SMACK64TRANSMUTE [ 0.813954] evm: security.SMACK64MMAP [ 0.813955] evm: security.apparmor [ 0.813955] evm: security.ima [ 0.813956] evm: security.capability [ 0.813957] evm: HMAC attrs: 0x1 [ 0.814514] PM: Magic number: 8:606:608 [ 0.814649] rtc_cmos 00:01: setting system clock to 2020-06-27T00:37:11 UTC (1593218231) [ 0.986438] battery: ACPI: Battery Slot [BAT1] (battery present) [ 0.987991] Freeing unused decrypted memory: 2040K [ 0.988564] Freeing unused kernel image memory: 2712K [ 0.988631] Write protecting the kernel read-only data: 22528k [ 0.989170] Freeing unused kernel image memory: 2008K [ 0.989451] Freeing unused kernel image memory: 1192K [ 1.004470] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.004471] x86/mm: Checking user space page tables [ 1.019442] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.019444] Run /init as init process [ 1.078195] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.090196] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 1.094185] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.179161] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.184428] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204) [ 1.184438] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.184442] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 1.184448] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.184450] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 1.184456] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.184457] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 1.184463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.184464] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.184914] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.187926] ahci 0000:00:1f.2: version 3.0 [ 1.193008] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.198653] libphy: r8169: probed [ 1.199052] r8169 0000:01:00.0 eth0: RTL8105e, XX:XX:XX:XX:XX:XX, XID 40c, IRQ 28 [ 1.202224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.202231] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.220181] scsi host0: ahci [ 1.220361] scsi host1: ahci [ 1.227990] scsi host2: ahci [ 1.228737] scsi host3: ahci [ 1.228936] scsi host4: ahci [ 1.229120] scsi host5: ahci [ 1.229208] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 27 [ 1.229209] ata2: DUMMY [ 1.229212] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 27 [ 1.229213] ata4: DUMMY [ 1.229214] ata5: DUMMY [ 1.229214] ata6: DUMMY [ 1.230561] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.230564] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.230870] hub 1-1:1.0: USB hub found [ 1.230934] hub 1-1:1.0: 6 ports detected [ 1.236440] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 1.236444] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.236446] usb 3-2: Product: USB Receiver [ 1.236449] usb 3-2: Manufacturer: Logitech [ 1.241743] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.250561] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.250564] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.250856] hub 2-1:1.0: USB hub found [ 1.250936] hub 2-1:1.0: 6 ports detected [ 1.267280] hidraw: raw HID events driver (C) Jiri Kosina [ 1.273915] usbcore: registered new interface driver usbhid [ 1.273916] usbhid: USB HID core driver [ 1.277801] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C52B.0001/input/input6 [ 1.334634] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 1.335137] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input7 [ 1.335294] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input8 [ 1.394511] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input9 [ 1.394951] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 1.395306] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 1.518252] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.545387] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.545431] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.547006] ata1.00: ATA-8: ST500LT012-9WS142, 0002SDM1, max UDMA/133 [ 1.547008] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.547939] ata1.00: configured for UDMA/133 [ 1.548445] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5 [ 1.548998] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.549077] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.549081] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.549107] sd 0:0:0:0: [sda] Write Protect is off [ 1.549111] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.549155] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.549715] ata3.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD11, max UDMA/100 [ 1.550365] ata3.00: configured for UDMA/100 [ 1.559657] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD11 PQ: 0 ANSI: 5 [ 1.583308] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 1.627705] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 1.627708] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.639907] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.639911] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.648292] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 [ 1.649709] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.654444] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.654531] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.690266] tsc: Refined TSC clocksource calibration: 1895.693 MHz [ 1.690279] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a68ea8fe5, max_idle_ns: 881590678518 ns [ 1.690309] clocksource: Switched to clocksource tsc [ 1.704937] input: Logitech Unifying Device. Wireless PID:400a Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input11 [ 1.705113] hid-generic 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:14.0-2/input2:1 [ 1.706197] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 1.758747] random: fast init done [ 1.760564] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input15 [ 1.760666] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.760686] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.760726] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.760854] logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-2/input2:1 [ 1.815094] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 1.815100] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.815104] usb 1-1.3: Product: USB2.0-CRW [ 1.815117] usb 1-1.3: Manufacturer: Generic [ 1.815118] usb 1-1.3: SerialNumber: ... [ 1.823559] usbcore: registered new interface driver rtsx_usb [ 1.894189] usb 1-1.4: new high-speed USB device number 5 using ehci-pci [ 1.943312] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754] [ 2.009156] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..] [ 2.009164] psmouse serio1: synaptics: Your touchpad (PNP: DLL0597 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 2.067563] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ad, bcdDevice=29.25 [ 2.067566] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 2.067568] usb 1-1.4: Product: Laptop_Integrated_Webcam_HD [ 2.067569] usb 1-1.4: Manufacturer: CN0Y3PX87248734TAWHPA00 [ 2.123236] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635 [ 2.197232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.105190] fbcon: Taking over console [ 3.105333] Console: switching to colour frame buffer device 170x48 [ 3.144917] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 4.555846] systemd[1]: Inserted module 'autofs4' [ 4.718875] systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.738406] systemd[1]: Detected architecture x86-64. [ 4.777087] systemd[1]: Set hostname to ... [ 5.122428] random: crng init done [ 5.122431] random: 7 urandom warning(s) missed due to ratelimiting [ 6.537419] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 7.154267] systemd[1]: Created slice system-modprobe.slice. [ 7.154583] systemd[1]: Created slice User and Session Slice. [ 7.154676] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.154975] systemd[1]: Set up automount ... [ 7.155022] systemd[1]: Reached target User and Group Name Lookups. [ 7.155039] systemd[1]: Reached target Remote File Systems. [ 7.155058] systemd[1]: Reached target Slices. [ 7.171315] systemd[1]: Listening on Syslog Socket. [ 7.171567] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.171703] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.172066] systemd[1]: Listening on Journal Audit Socket. [ 7.172214] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.172378] systemd[1]: Listening on Journal Socket. [ 7.172530] systemd[1]: Listening on udev Control Socket. [ 7.172625] systemd[1]: Listening on udev Kernel Socket. [ 7.173904] systemd[1]: Mounting Huge Pages File System... [ 7.175327] systemd[1]: Mounting POSIX Message Queue File System... [ 7.177349] systemd[1]: Mounting Kernel Debug File System... [ 7.178709] systemd[1]: Mounting Kernel Trace File System... [ 7.180729] systemd[1]: Starting Journal Service... [ 7.190748] systemd[1]: Starting Set the console keyboard layout... [ 7.192507] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.194590] systemd[1]: Starting Load Kernel Module drm... [ 7.220894] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.220954] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.287637] systemd[1]: Starting Load Kernel Modules... [ 7.289479] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.291661] systemd[1]: Starting udev Coldplug all Devices... [ 7.293545] systemd[1]: Starting Uncomplicated firewall... [ 7.296541] systemd[1]: Mounted Huge Pages File System. [ 7.296718] systemd[1]: Mounted POSIX Message Queue File System. [ 7.296867] systemd[1]: Mounted Kernel Debug File System. [ 7.297010] systemd[1]: Mounted Kernel Trace File System. [ 7.297615] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.422892] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 7.425765] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.427295] systemd[1]: Activating swap /swapfile... [ 7.537493] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.537609] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.539523] systemd[1]: Starting Load/Save Random Seed... [ 7.541474] systemd[1]: Starting Create System Users... [ 7.542926] systemd[1]: Finished Set the console keyboard layout. [ 7.543547] systemd[1]: XXX@XXX: Succeeded. [ 7.544174] systemd[1]: Finished Load Kernel Module drm. [ 7.545175] systemd[1]: Finished Uncomplicated firewall. [ 7.622876] lp: driver loaded but no devices found [ 7.654401] ppdev: user-space parallel port driver [ 7.731981] systemd[1]: Finished Load Kernel Modules. [ 7.734152] systemd[1]: Mounting FUSE Control File System... [ 7.736062] systemd[1]: Mounting Kernel Configuration File System... [ 7.737959] systemd[1]: Starting Apply Kernel Variables... [ 7.740449] systemd[1]: Mounted FUSE Control File System. [ 7.742819] systemd[1]: Mounted Kernel Configuration File System. [ 7.746201] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 7.746326] systemd[1]: Activated swap /swapfile. [ 7.746536] systemd[1]: Reached target Swap. [ 7.757499] systemd[1]: Finished udev Coldplug all Devices. [ 7.841151] systemd[1]: Started Journal Service. [ 7.900471] systemd-journald[328]: Received client request to flush runtime journal. [ 13.420627] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 13.542663] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input16 [ 14.142355] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 14.142357] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 14.142358] RAPL PMU: hw unit of domain package 2^-16 Joules [ 14.142359] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 14.417734] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 14.417737] fb0: switching to inteldrmfb from VESA VGA [ 14.417860] Console: switching to colour dummy device 80x25 [ 14.417923] i915 0000:00:02.0: vgaarb: deactivate vga console [ 14.419229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.419230] [drm] Driver supports precise vblank timestamp query. [ 14.420318] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.452356] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 14.453988] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.454430] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17 [ 14.580277] fbcon: i915drmfb (fb0) is primary device [ 14.580352] Console: switching to colour frame buffer device 170x48 [ 14.580378] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 14.706998] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.710606] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.210346] cryptd: max_cpu_qlen set to 1000 [ 15.343953] Bluetooth: Core ver 2.22 [ 15.343977] NET: Registered protocol family 31 [ 15.343979] Bluetooth: HCI device and connection manager initialized [ 15.343986] Bluetooth: HCI socket layer initialized [ 15.343988] Bluetooth: L2CAP socket layer initialized [ 15.343994] Bluetooth: SCO socket layer initialized [ 15.356036] ath: phy0: WB335 1-ANT card detected [ 15.356039] ath: phy0: Set BT/WLAN RX diversity capability [ 15.365737] ath: phy0: Enable LNA combining [ 15.367202] ath: phy0: ASPM enabled: 0x43 [ 15.367205] ath: EEPROM regdomain: 0x60 [ 15.367206] ath: EEPROM indicates we should expect a direct regpair map [ 15.367209] ath: Country alpha2 being used: 00 [ 15.367210] ath: Regpair used: 0x60 [ 15.368531] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.371566] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb70640880000, irq=17 [ 15.700118] mc: Linux media interface: v0.10 [ 16.063142] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 16.174799] usbcore: registered new interface driver btusb [ 16.303451] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 16.303455] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.303457] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 16.303458] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 16.303459] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 16.303461] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 16.303463] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 16.328345] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 16.328454] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 16.328558] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 16.379990] videodev: Linux video capture interface: v2.00 [ 16.441179] usbcore: registered new interface driver ath3k [ 16.456915] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 16.591894] usb 1-1.1: USB disconnect, device number 3 [ 16.592345] kvm: disabled by bios [ 16.648148] kvm: disabled by bios [ 16.680062] kvm: disabled by bios [ 16.716140] kvm: disabled by bios [ 16.814222] usb 1-1.1: new full-speed USB device number 6 using ehci-pci [ 16.923362] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 16.923365] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 17.005182] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad) [ 17.057828] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 17.057831] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized! [ 17.057833] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized! [ 17.057834] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 17.057924] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input21 [ 17.058035] usbcore: registered new interface driver uvcvideo [ 17.058037] USB Video Class driver (1.1.1) [ 17.648295] intel_rapl_common: Found RAPL domain package [ 17.648298] intel_rapl_common: Found RAPL domain core [ 17.648299] intel_rapl_common: Found RAPL domain uncore [ 17.648305] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 25.225799] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.225802] Bluetooth: BNEP filters: protocol multicast [ 25.225807] Bluetooth: BNEP socket layer initialized [ 25.254423] NET: Registered protocol family 38 [ 32.592073] RTL8208 Fast Ethernet r8169-100:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 32.873011] r8169 0000:01:00.0 enp1s0: Link is Down [ 34.732034] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 34.744919] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 34.746962] wlp2s0: authenticated [ 34.750227] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 34.754424] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [ 34.754601] wlp2s0: associated [ 34.872472] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 44.812799] Initializing XFRM netlink socket [ 57.204056] rfkill: input handler disabled [ 66.131632] rfkill: input handler enabled [ 67.684949] Bluetooth: RFCOMM TTY layer initialized [ 67.684958] Bluetooth: RFCOMM socket layer initialized [ 67.684967] Bluetooth: RFCOMM ver 1.11 [ 74.057800] rfkill: input handler disabled [ 185.945541] pci_bus 0000:01: Allocating resources [ 185.945554] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 400000 add_align 100000 [ 185.945562] pci_bus 0000:02: Allocating resources [ 185.945573] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 185.945576] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 185.945584] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafefffff] [ 185.945589] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref] [ 185.945593] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] [ 191.050564] PM: suspend entry (deep) [ 191.567367] Filesystems sync: 0.516 seconds [ 191.567990] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 191.573024] OOM killer disabled. [ 191.573026] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 191.574558] printk: Suspending console(s) (use no_console_suspend to debug) [ 191.589435] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 191.741422] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 191.741758] sd 0:0:0:0: [sda] Stopping disk [ 192.058361] ACPI: EC: interrupt blocked [ 192.077819] ACPI: Preparing to enter system sleep state S3 [ 192.079050] ACPI: EC: event blocked [ 192.079051] ACPI: EC: EC stopped [ 192.079053] PM: Saving platform NVS memory [ 192.079077] Disabling non-boot CPUs ... [ 192.081561] smpboot: CPU 1 is now offline [ 192.087393] IRQ 30: no longer affine to CPU2 [ 192.088414] smpboot: CPU 2 is now offline [ 192.092173] IRQ 16: no longer affine to CPU3 [ 192.092178] IRQ 17: no longer affine to CPU3 [ 192.092182] IRQ 19: no longer affine to CPU3 [ 192.092187] IRQ 23: no longer affine to CPU3 [ 192.092189] IRQ 26: no longer affine to CPU3 [ 192.093203] smpboot: CPU 3 is now offline [ 192.096248] ACPI: Low-level resume complete [ 192.096303] ACPI: EC: EC started [ 192.096304] PM: Restoring platform NVS memory [ 192.103508] Enabling non-boot CPUs ... [ 192.103627] x86: Booting SMP configuration: [ 192.103629] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 192.107313] CPU1 is up [ 192.107404] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 192.111613] CPU2 is up [ 192.111694] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 192.115077] CPU3 is up [ 192.116746] ACPI: Waking up from system sleep state S3 [ 192.122359] ACPI: EC: interrupt unblocked [ 192.163003] ACPI: EC: event unblocked [ 192.164098] ath: phy0: ASPM enabled: 0x43 [ 192.174233] sd 0:0:0:0: [sda] Starting disk [ 192.402187] usb 3-2: reset full-speed USB device number 2 using xhci_hcd [ 192.413949] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [ 192.500897] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 192.504777] ata3.00: configured for UDMA/100 [ 192.601963] usb 1-1.1: reset full-speed USB device number 6 using ehci-pci [ 192.710267] usb 1-1.1: device firmware changed [ 192.789935] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [ 192.911755] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754] [ 192.966205] OOM killer enabled. [ 192.966209] Restarting tasks ... [ 192.980432] usb 1-1.1: USB disconnect, device number 6 [ 192.985556] done. [ 192.985881] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..] [ 193.063363] usb 1-1.1: new full-speed USB device number 7 using ehci-pci [ 193.073657] pci_bus 0000:01: Allocating resources [ 193.073682] pci_bus 0000:02: Allocating resources [ 193.176526] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 193.176529] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 193.298049] PM: suspend exit [ 194.237912] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 194.450623] ata1.00: configured for UDMA/133 [ 194.721238] RTL8208 Fast Ethernet r8169-100:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 194.726601] usb 1-1.1: USB disconnect, device number 7 [ 194.949877] usb 1-1.1: new full-speed USB device number 8 using ehci-pci [ 194.996545] r8169 0000:01:00.0 enp1s0: Link is Down [ 196.330659] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 196.343297] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 196.348247] wlp2s0: authenticated [ 196.349791] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 196.366092] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 196.366274] wlp2s0: associated [ 196.366593] ath: EEPROM regdomain: 0x8348 [ 196.366595] ath: EEPROM indicates we should expect a country code [ 196.366597] ath: doing EEPROM country->regdmn map search [ 196.366600] ath: country maps to regdmn code: 0x3a [ 196.366602] ath: Country alpha2 being used: US [ 196.366604] ath: Regpair used: 0x3a [ 196.366607] ath: regdomain 0x8348 dynamically updated by country element [ 196.454546] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 200.163213] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 200.163220] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1160.511471] sr0: detected capacity change from 460349440 to 461664256 [ 2242.388873] NET: Registered protocol family 24 [ 2242.435632] l2tp_core: L2TP core driver, V2.0 [ 2242.439625] l2tp_netlink: L2TP netlink interface [ 2242.443392] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 2314.423792] sr0: detected capacity change from 461664256 to 427540480 [ 2963.232433] sr0: detected capacity change from 427540480 to 416317440 [ 3697.421401] sr0: detected capacity change from 416317440 to 347805696 [ 3955.628498] perf: interrupt took too long (2550 > 2500), lowering kernel.perf_event_max_sample_rate to 78250