[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 5.4.0-47-generic (XXX@XXX) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 (Ubuntu 5.4.0-47.51-generic 5.4.55) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_011-D996-024A-9F58-3CE8675E0A87 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c4d71fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c4d72000-0x00000000c4d78fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c4d79000-0x00000000c51cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c51d0000-0x00000000c5606fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c5607000-0x00000000d8220fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8221000-0x00000000d82aafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d82ab000-0x00000000d82d3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d82d4000-0x00000000d8955fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d8956000-0x00000000d9ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/H81M-PLUS, BIOS 2205 05/26/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3398.351 MHz processor [ 0.001525] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001526] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001531] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000 [ 0.001534] MTRR default type: uncachable [ 0.001534] MTRR fixed ranges enabled: [ 0.001535] 00000-9FFFF write-back [ 0.001536] A0000-BFFFF uncachable [ 0.001536] C0000-CFFFF write-protect [ 0.001537] D0000-E7FFF uncachable [ 0.001537] E8000-FFFFF write-protect [ 0.001538] MTRR variable ranges enabled: [ 0.001539] 0 base 0000000000 mask 7E00000000 write-back [ 0.001539] 1 base 0200000000 mask 7FE0000000 write-back [ 0.001540] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.001540] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.001541] 4 base 00DB000000 mask 7FFF000000 uncachable [ 0.001541] 5 base 021FE00000 mask 7FFFE00000 uncachable [ 0.001542] 6 disabled [ 0.001542] 7 disabled [ 0.001542] 8 disabled [ 0.001543] 9 disabled [ 0.001817] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001929] total RAM covered: 8110M [ 0.002143] Found optimal setting for mtrr clean up [ 0.002144] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G [ 0.002396] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved [ 0.002399] last_pfn = 0xda000 max_arch_pfn = 0x400000000 [ 0.008242] found SMP MP-table at [mem 0x000fd770-0x000fd77f] [ 0.014480] check: Scanning 1 areas for low memory corruption [ 0.014483] Using GB pages for direct mapping [ 0.015051] RAMDISK: [mem 0x2dae7000-0x32d6afff] [ 0.015057] ACPI: Early table checksum verification disabled [ 0.015059] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.015061] ACPI: XSDT 0x00000000D82C2080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015065] ACPI: FACP 0x00000000D82CECF0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.015069] ACPI: DSDT 0x00000000D82C2198 00CB54 (v02 ALASKA A M I 00000031 INTL 20091112) [ 0.015071] ACPI: FACS 0x00000000D8954080 000040 [ 0.015073] ACPI: APIC 0x00000000D82CEE00 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.015074] ACPI: FPDT 0x00000000D82CEE78 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015076] ACPI: LPIT 0x00000000D82CEEC0 00005C (v01 ALASKA A M I 00000000 AMI. 00000005) [ 0.015078] ACPI: SSDT 0x00000000D82CEF20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112) [ 0.015080] ACPI: SSDT 0x00000000D82CF460 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112) [ 0.015082] ACPI: MCFG 0x00000000D82CFF38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.015084] ACPI: HPET 0x00000000D82CFF78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.015086] ACPI: SSDT 0x00000000D82CFFB0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.015088] ACPI: SSDT 0x00000000D82D0320 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.015090] ACPI: BGRT 0x00000000D82D3860 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.015095] ACPI: Local APIC address 0xfee00000 [ 0.015158] No NUMA configuration found [ 0.015159] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff] [ 0.015166] NODE_DATA(0) allocated [mem 0x21fdd5000-0x21fdfffff] [ 0.015327] Zone ranges: [ 0.015328] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.015329] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.015329] Normal [mem 0x0000000100000000-0x000000021fdfffff] [ 0.015330] Device empty [ 0.015330] Movable zone start for each node [ 0.015333] Early memory node ranges [ 0.015333] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.015334] node 0: [mem 0x0000000000100000-0x00000000c4d71fff] [ 0.015335] node 0: [mem 0x00000000c4d79000-0x00000000c51cffff] [ 0.015335] node 0: [mem 0x00000000c5607000-0x00000000d8220fff] [ 0.015336] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff] [ 0.015336] node 0: [mem 0x0000000100000000-0x000000021fdfffff] [ 0.015589] Zeroed struct page in unavailable ranges: 33920 pages [ 0.015590] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff] [ 0.015591] On node 0 totalpages: 2063232 [ 0.015592] DMA zone: 64 pages used for memmap [ 0.015592] DMA zone: 21 pages reserved [ 0.015593] DMA zone: 3996 pages, LIFO batch:0 [ 0.015631] DMA32 zone: 13752 pages used for memmap [ 0.015631] DMA32 zone: 880100 pages, LIFO batch:63 [ 0.024199] Normal zone: 18424 pages used for memmap [ 0.024200] Normal zone: 1179136 pages, LIFO batch:63 [ 0.034673] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff] [ 0.034738] ACPI: PM-Timer IO Port: 0x1808 [ 0.034739] ACPI: Local APIC address 0xfee00000 [ 0.034744] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.034753] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.034755] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034756] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034757] ACPI: IRQ0 used by override. [ 0.034757] ACPI: IRQ9 used by override. [ 0.034758] Using ACPI (MADT) for SMP configuration information [ 0.034759] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.034763] TSC deadline timer available [ 0.034763] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.034778] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034779] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.034779] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.034780] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.034780] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.034781] PM: Registered nosave memory: [mem 0xc4d72000-0xc4d78fff] [ 0.034783] PM: Registered nosave memory: [mem 0xc51d0000-0xc5606fff] [ 0.034784] PM: Registered nosave memory: [mem 0xd8221000-0xd82aafff] [ 0.034784] PM: Registered nosave memory: [mem 0xd82ab000-0xd82d3fff] [ 0.034785] PM: Registered nosave memory: [mem 0xd82d4000-0xd8955fff] [ 0.034785] PM: Registered nosave memory: [mem 0xd8956000-0xd9ffefff] [ 0.034786] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] [ 0.034787] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff] [ 0.034787] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.034787] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.034788] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.034788] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.034788] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.034789] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.034789] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.034789] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.034790] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.034790] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.034790] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.034791] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.034792] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.034793] Booting paravirtualized kernel on bare hardware [ 0.034795] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034799] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.034982] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.034987] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.034988] pcpu-alloc: [0] 0 1 2 3 [ 0.035008] Built 1 zonelists, mobility grouping on. Total pages: 2030971 [ 0.035009] Policy zone: Normal [ 0.035010] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_011-D996-024A-9F58-3CE8675E0A87 ro quiet splash [ 0.035496] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.035712] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.035746] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.039236] Calgary: detecting Calgary via BIOS EBDA area [ 0.039237] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.057913] Memory: 7925156K/8252928K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 327772K reserved, 0K cma-reserved) [ 0.057920] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.058020] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.058030] Kernel/User page tables isolation: enabled [ 0.058041] ftrace: allocating 44505 entries in 174 pages [ 0.070433] rcu: Hierarchical RCU implementation. [ 0.070434] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.070434] Tasks RCU enabled. [ 0.070435] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.070436] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.072707] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.072967] random: crng done (trusting CPU's manufacturer) [ 0.072984] Console: colour dummy device 80x25 [ 0.072988] printk: console [tty0] enabled [ 0.073003] ACPI: Core revision 20190816 [ 0.073086] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.073095] APIC: Switch to symmetric I/O mode setup [ 0.073462] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.093095] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30fc38dd468, max_idle_ns: 440795328658 ns [ 0.093098] Calibrating delay loop (skipped), value calculated using timer frequency.. 6796.70 BogoMIPS (lpj=13593404) [ 0.093099] pid_max: default: 32768 minimum: 301 [ 0.093123] LSM: Security Framework initializing [ 0.093131] Yama: becoming mindful. [ 0.093153] AppArmor: AppArmor initialized [ 0.093188] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.093201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.093212] *** VALIDATE tmpfs *** [ 0.093321] *** VALIDATE proc *** [ 0.093359] *** VALIDATE cgroup1 *** [ 0.093360] *** VALIDATE cgroup2 *** [ 0.093404] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.093412] process: using mwait in idle threads [ 0.093414] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.093414] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.093416] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.093417] Spectre V2 : Mitigation: Full generic retpoline [ 0.093418] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.093418] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.093419] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.093419] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.093420] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.093423] SRBDS: Mitigation: Microcode [ 0.093423] MDS: Mitigation: Clear CPU buffers [ 0.093557] Freeing SMP alternatives memory: 40K [ 0.097155] smpboot: CPU0: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.097244] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.097257] ... version: 3 [ 0.097258] ... bit width: 48 [ 0.097258] ... generic registers: 4 [ 0.097258] ... value mask: 0000ffffffffffff [ 0.097259] ... max period: 00007fffffffffff [ 0.097259] ... fixed-purpose events: 3 [ 0.097259] ... event mask: 000000070000000f [ 0.097285] rcu: Hierarchical SRCU implementation. [ 0.097926] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.097968] smp: Bringing up secondary CPUs ... [ 0.098030] x86: Booting SMP configuration: [ 0.098031] .... node #0, CPUs: #1 #2 [ 0.099724] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.099724] #3 [ 0.099724] smp: Brought up 1 node, 4 CPUs [ 0.099724] smpboot: Max logical packages: 1 [ 0.099724] smpboot: Total of 4 processors activated (27186.80 BogoMIPS) [ 0.101331] devtmpfs: initialized [ 0.101331] x86/mm: Memory block size: 128MB [ 0.101640] PM: Registering ACPI NVS region [mem 0xc4d72000-0xc4d78fff] (28672 bytes) [ 0.101640] PM: Registering ACPI NVS region [mem 0xd82d4000-0xd8955fff] (6823936 bytes) [ 0.101640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.101640] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.101640] pinctrl core: initialized pinctrl subsystem [ 0.101640] PM: RTC time: 04:30:14, date: 2020-09-18 [ 0.101640] NET: Registered protocol family 16 [ 0.101640] EISA bus registered [ 0.101640] cpuidle: using governor ladder [ 0.101640] cpuidle: using governor menu [ 0.101640] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.101640] ACPI: bus type PCI registered [ 0.101640] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.101640] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.101640] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.101640] PCI: Using configuration type 1 for base access [ 0.101640] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.101640] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.102125] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.102125] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.102125] ACPI: Added _OSI(Module Device) [ 0.102125] ACPI: Added _OSI(Processor Device) [ 0.102125] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.102125] ACPI: Added _OSI(Processor Aggregator Device) [ 0.102125] ACPI: Added _OSI(Linux-Dell-Video) [ 0.102125] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.102125] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.113303] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.114390] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.115163] ACPI: Dynamic OEM Table Load: [ 0.115167] ACPI: SSDT 0xFFFF9AA25E301400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) [ 0.115977] ACPI: Dynamic OEM Table Load: [ 0.115980] ACPI: SSDT 0xFFFF9AA25E158000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112) [ 0.116821] ACPI: Dynamic OEM Table Load: [ 0.116823] ACPI: SSDT 0xFFFF9AA25E1CC400 000119 (v01 PmRef ApCst 00003000 INTL 20091112) [ 0.118156] ACPI: Interpreter enabled [ 0.118178] ACPI: (supports S0 S3 S4 S5) [ 0.118178] ACPI: Using IOAPIC for interrupt routing [ 0.118202] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.118423] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.125785] ACPI: Power Resource [FN00] (off) [ 0.125848] ACPI: Power Resource [FN01] (off) [ 0.125906] ACPI: Power Resource [FN02] (off) [ 0.125964] ACPI: Power Resource [FN03] (off) [ 0.126023] ACPI: Power Resource [FN04] (off) [ 0.126761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.126765] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.127003] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.127151] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.127152] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.127523] PCI host bridge to bus 0000:00 [ 0.127525] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.127525] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.127526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.127527] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.127528] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.127528] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.127529] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.127530] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.127530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.127531] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.127532] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.127539] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.127607] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.127638] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.127750] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000 [ 0.127758] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.127762] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.127765] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.127832] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.127839] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.127925] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.127941] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.127989] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.128054] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.128071] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit] [ 0.128122] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.128181] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.128199] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff] [ 0.128268] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.128332] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.128348] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.128406] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.128465] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.128531] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.128638] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.128704] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.128814] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.128880] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.128994] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.129012] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] [ 0.129082] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.129150] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100 [ 0.129299] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.129311] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.129316] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.129322] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.129327] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.129332] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.129337] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.129365] pci 0000:00:1f.2: PME# supported from D3hot [ 0.129421] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.129435] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.129450] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.129538] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.129588] acpiphp: Slot [1] registered [ 0.129591] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.129649] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.129676] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.129701] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit] [ 0.129716] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.129812] pci 0000:03:00.0: supports D1 D2 [ 0.129813] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129915] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.129917] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.129919] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.129923] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.129979] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.130011] pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c07fff 64bit] [ 0.130136] pci 0000:04:00.0: PME# supported from D3cold [ 0.130220] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.130224] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.130811] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.130861] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.130909] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.130956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.131004] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.131050] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.131097] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.131144] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.131468] iommu: Default domain type: Translated [ 0.131468] SCSI subsystem initialized [ 0.131468] libata version 3.00 loaded. [ 0.131468] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.131468] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.131468] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.131468] vgaarb: loaded [ 0.131468] ACPI: bus type USB registered [ 0.131468] usbcore: registered new interface driver usbfs [ 0.131468] usbcore: registered new interface driver hub [ 0.131468] usbcore: registered new device driver usb [ 0.131468] pps_core: LinuxPPS API ver. 1 registered [ 0.131468] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.131468] PTP clock support registered [ 0.131468] EDAC MC: Ver: 3.0.0 [ 0.131468] PCI: Using ACPI for IRQ routing [ 0.131468] PCI: pci_cache_line_size set to 64 bytes [ 0.131468] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.131468] e820: reserve RAM buffer [mem 0xc4d72000-0xc7ffffff] [ 0.131468] e820: reserve RAM buffer [mem 0xc51d0000-0xc7ffffff] [ 0.131468] e820: reserve RAM buffer [mem 0xd8221000-0xdbffffff] [ 0.131468] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff] [ 0.131468] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff] [ 0.133099] NetLabel: Initializing [ 0.133099] NetLabel: domain hash size = 128 [ 0.133099] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.133099] NetLabel: unlabeled traffic allowed by default [ 0.133542] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.133545] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.133545] clocksource: Switched to clocksource tsc-early [ 0.142174] *** VALIDATE bpf *** [ 0.142246] VFS: Disk quotas dquot_6.6.0 [ 0.142258] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.142278] *** VALIDATE ramfs *** [ 0.142281] *** VALIDATE hugetlbfs *** [ 0.142346] AppArmor: AppArmor Filesystem Enabled [ 0.142367] pnp: PnP ACPI init [ 0.142481] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.142485] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.142659] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.142660] system 00:01: [io 0xffff] has been reserved [ 0.142661] system 00:01: [io 0xffff] has been reserved [ 0.142661] system 00:01: [io 0xffff] has been reserved [ 0.142662] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.142663] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.142664] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.142665] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.142665] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.142666] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.142669] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142686] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.142727] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.142729] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.142807] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.142809] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142848] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.142850] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143227] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143228] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.143229] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.143229] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.143230] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.143231] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.143233] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.143234] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.143235] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.143235] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.143236] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.143237] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.143240] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143464] pnp: PnP ACPI: found 7 devices [ 0.144362] thermal_sys: Registered thermal governor 'fair_share' [ 0.144363] thermal_sys: Registered thermal governor 'bang_bang' [ 0.144364] thermal_sys: Registered thermal governor 'step_wise' [ 0.144364] thermal_sys: Registered thermal governor 'user_space' [ 0.144364] thermal_sys: Registered thermal governor 'power_allocator' [ 0.148848] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.148871] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.148872] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.148873] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.148880] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.148884] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.148886] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.148888] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.148892] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.148893] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.148896] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.148899] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.148903] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.148904] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.148907] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.148909] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.148912] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.148915] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.148921] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.148922] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.148923] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.148923] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.148924] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.148925] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.148925] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.148926] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.148927] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.148927] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window] [ 0.148928] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.148929] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.148930] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.148930] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.148931] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.148932] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.148933] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.149025] NET: Registered protocol family 2 [ 0.149151] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.149187] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.149300] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.149405] TCP: Hash tables configured (established 65536 bind 65536) [ 0.149431] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.149449] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.149484] NET: Registered protocol family 1 [ 0.149487] NET: Registered protocol family 44 [ 0.149495] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.173176] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 22976 usecs [ 0.193171] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 19514 usecs [ 0.193298] PCI: CLS 64 bytes, default 64 [ 0.193330] Trying to unpack rootfs image as initramfs... [ 0.343506] Freeing initrd memory: 84496K [ 0.343509] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.343511] software IO TLB: mapped [mem 0xd4221000-0xd8221000] (64MB) [ 0.343679] check: Scanning for low memory corruption every 60 seconds [ 0.343968] Initialise system trusted keyrings [ 0.343976] Key type blacklist registered [ 0.343995] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.344882] zbud: loaded [ 0.345137] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.345240] fuse: init (API version 7.31) [ 0.345251] *** VALIDATE fuse *** [ 0.345252] *** VALIDATE fuse *** [ 0.345317] Platform Keyring initialized [ 0.348289] Key type asymmetric registered [ 0.348290] Asymmetric key parser 'x509' registered [ 0.348294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.348318] io scheduler mq-deadline registered [ 0.348793] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.348824] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.348824] vesafb: scrolling: redraw [ 0.348825] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.348837] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000d46742ae, using 4160k, total 4160k [ 0.348865] fbcon: Deferring console take-over [ 0.348865] fb0: VESA VGA frame buffer device [ 0.348874] intel_idle: MWAIT substates: 0x42120 [ 0.348874] intel_idle: v0.4.1 model 0x3C [ 0.348987] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.349075] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.349090] ACPI: Power Button [PWRB] [ 0.349129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.349149] ACPI: Power Button [PWRF] [ 0.349701] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.349702] ACPI: Thermal Zone [TZ00] (28 C) [ 0.349909] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.349909] ACPI: Thermal Zone [TZ01] (30 C) [ 0.350013] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.351048] Linux agpgart interface v0.103 [ 0.352280] loop: module loaded [ 0.352408] libphy: Fixed MDIO Bus: probed [ 0.352409] tun: Universal TUN/TAP device driver, 1.6 [ 0.352425] PPP generic driver version 2.4.2 [ 0.352456] VFIO - User Level meta-driver version: 0.3 [ 0.352506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.352510] ehci-pci: EHCI PCI platform driver [ 0.352610] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.352614] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.352623] ehci-pci 0000:00:1a.0: debug port 2 [ 0.356512] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.356521] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e1c000 [ 0.369133] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.369169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.369170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.369171] usb usb1: Product: EHCI Host Controller [ 0.369171] usb usb1: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 0.369172] usb usb1: SerialNumber: ... [ 0.369328] hub 1-0:1.0: USB hub found [ 0.369332] hub 1-0:1.0: 2 ports detected [ 0.369523] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.369526] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.369534] ehci-pci 0000:00:1d.0: debug port 2 [ 0.373417] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.373424] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 0.389133] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.389157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.389158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.389158] usb usb2: Product: EHCI Host Controller [ 0.389159] usb usb2: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 0.389160] usb usb2: SerialNumber: ... [ 0.389301] hub 2-0:1.0: USB hub found [ 0.389304] hub 2-0:1.0: 2 ports detected [ 0.389407] ehci-platform: EHCI generic platform driver [ 0.389414] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.389416] ohci-pci: OHCI PCI platform driver [ 0.389422] ohci-platform: OHCI generic platform driver [ 0.389426] uhci_hcd: USB Universal Host Controller Interface driver [ 0.389515] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.389519] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.390554] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.390557] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.390656] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.390657] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.390658] usb usb3: Product: xHCI Host Controller [ 0.390659] usb usb3: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 0.390659] usb usb3: SerialNumber: ... [ 0.390799] hub 3-0:1.0: USB hub found [ 0.390808] hub 3-0:1.0: 10 ports detected [ 0.392243] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.392245] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.392247] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.392267] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.392268] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.392269] usb usb4: Product: xHCI Host Controller [ 0.392269] usb usb4: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 0.392270] usb usb4: SerialNumber: ... [ 0.392408] hub 4-0:1.0: USB hub found [ 0.392412] hub 4-0:1.0: 2 ports detected [ 0.392632] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.392635] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 0.531721] xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410 [ 0.531885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.531886] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.531887] usb usb5: Product: xHCI Host Controller [ 0.531888] usb usb5: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 0.531888] usb usb5: SerialNumber: ... [ 0.532022] hub 5-0:1.0: USB hub found [ 0.532029] hub 5-0:1.0: 2 ports detected [ 0.532106] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.532108] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 0.532109] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 0.532143] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.532155] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.532156] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.532157] usb usb6: Product: xHCI Host Controller [ 0.532157] usb usb6: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 0.532158] usb usb6: SerialNumber: ... [ 0.532290] hub 6-0:1.0: USB hub found [ 0.532296] hub 6-0:1.0: 2 ports detected [ 0.532373] i8042: PNP: No PS/2 controller found. [ 0.532444] mousedev: PS/2 mouse device common for all mice [ 0.532553] rtc_cmos 00:02: RTC can wake from S4 [ 0.532699] rtc_cmos 00:02: registered as rtc0 [ 0.532708] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.532713] i2c /dev entries driver [ 0.532745] device-mapper: uevent: version 1.0.3 [ 0.532798] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.532813] platform eisa.0: Probing EISA bus 0 [ 0.532814] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.532815] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.532816] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.532816] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.532817] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.532817] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.532818] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.532819] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.532819] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.532820] platform eisa.0: EISA: Detected 0 cards [ 0.532824] intel_pstate: Intel P-state driver initializing [ 0.532932] ledtrig-cpu: registered to indicate activity on CPUs [ 0.532987] drop_monitor: Initializing network drop monitor service [ 0.533109] NET: Registered protocol family 10 [ 0.537387] Segment Routing with IPv6 [ 0.537407] NET: Registered protocol family 17 [ 0.537433] Key type dns_resolver registered [ 0.537592] RAS: Correctable Errors collector initialized. [ 0.537619] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.537645] microcode: Microcode Update Driver: v2.2. [ 0.537649] IPI shorthand broadcast: enabled [ 0.537654] sched_clock: Marking stable (537425854, 217137)->(549069574, -11426583) [ 0.537699] registered taskstats version 1 [ 0.537706] Loading compiled-in X.509 certificates [ 0.538265] Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d' [ 0.538290] zswap: loaded using pool lzo/zbud [ 0.538329] Key type ._fscrypt registered [ 0.538330] Key type .fscrypt registered [ 0.542220] Key type big_key registered [ 0.544058] Key type encrypted registered [ 0.544060] AppArmor: AppArmor sha1 policy hashing enabled [ 0.544065] ima: No TPM chip found, activating TPM-bypass! [ 0.544070] ima: Allocated hash algorithm: sha1 [ 0.544075] ima: No architecture policies found [ 0.544082] evm: Initialising EVM extended attributes: [ 0.544082] evm: security.selinux [ 0.544083] evm: security.SMACK64 [ 0.544083] evm: security.SMACK64EXEC [ 0.544083] evm: security.SMACK64TRANSMUTE [ 0.544084] evm: security.SMACK64MMAP [ 0.544084] evm: security.apparmor [ 0.544084] evm: security.ima [ 0.544085] evm: security.capability [ 0.544085] evm: HMAC attrs: 0x1 [ 0.544554] PM: Magic number: 4:271:515 [ 0.544646] rtc_cmos 00:02: setting system clock to 2020-09-18T04:30:15 UTC (1600403415) [ 0.545415] Freeing unused decrypted memory: 2040K [ 0.545713] Freeing unused kernel image memory: 2716K [ 0.581152] Write protecting the kernel read-only data: 22528k [ 0.581480] Freeing unused kernel image memory: 2008K [ 0.581638] Freeing unused kernel image memory: 1188K [ 0.588848] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.588849] x86/mm: Checking user space page tables [ 0.595818] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.595819] Run /init as init process [ 0.667262] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.670957] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204) [ 0.670965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.671292] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204) [ 0.671300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.671688] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204) [ 0.671693] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204) [ 0.671699] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.671704] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204) [ 0.671707] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204) [ 0.671712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.671712] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.671772] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.672410] ahci 0000:00:1f.2: version 3.0 [ 0.672583] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode [ 0.672585] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems [ 0.682532] libphy: r8169: probed [ 0.682764] r8169 0000:03:00.0 eth0: RTL8168g/8111g, XX:XX:XX:XX:XX:XX, XID 4c0, IRQ 35 [ 0.682766] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.690525] cryptd: max_cpu_qlen set to 1000 [ 0.696580] AVX2 version of gcm_enc/dec engaged. [ 0.696581] AES CTR mode by8 optimization enabled [ 0.698472] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 0.707139] scsi host0: ahci [ 0.709014] scsi host1: ahci [ 0.709117] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.709151] scsi host2: ahci [ 0.709255] scsi host3: ahci [ 0.709322] scsi host4: ahci [ 0.709389] scsi host5: ahci [ 0.709419] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 34 [ 0.709421] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 34 [ 0.709421] ata3: DUMMY [ 0.709422] ata4: DUMMY [ 0.709423] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 34 [ 0.709424] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 34 [ 0.725628] [drm] PipeC fused off [ 0.725639] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 0.725640] fb0: switching to inteldrmfb from VESA VGA [ 0.725685] i915 0000:00:02.0: vgaarb: deactivate vga console [ 0.729109] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.733105] usb 3-4: new low-speed USB device number 2 using xhci_hcd [ 0.737102] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.737103] [drm] Driver supports precise vblank timestamp query. [ 0.741155] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.753496] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 0.758131] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.758366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.865488] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 0.865568] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 0.865569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.865812] hub 1-1:1.0: USB hub found [ 0.865913] hub 1-1:1.0: 4 ports detected [ 0.885537] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 0.885538] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.885716] hub 2-1:1.0: USB hub found [ 0.885756] hub 2-1:1.0: 6 ports detected [ 0.889682] usb 6-1: New USB device found, idVendor=0424, idProduct=5537, bcdDevice=41.00 [ 0.889683] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 0.889684] usb 6-1: Product: USB5537 [ 0.889685] usb 6-1: Manufacturer: SMSC [ 0.890398] usb 3-4: New USB device found, idVendor=0461, idProduct=0010, bcdDevice= 1.04 [ 0.890399] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 0.890400] usb 3-4: Product: USB Keyboard [ 0.890400] usb 3-4: Manufacturer: NOVATEK [ 0.893223] hub 6-1:1.0: USB hub found [ 0.893680] hub 6-1:1.0: 7 ports detected [ 1.013134] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.013921] fbcon: i915drmfb (fb0) is primary device [ 1.013921] fbcon: Deferring console take-over [ 1.013923] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.017139] usb 3-6: new full-speed USB device number 3 using xhci_hcd [ 1.025139] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.025153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.025830] ata2.00: ATA-9: WDC WD10EURX-83UY4Y0, 01.01A01, max UDMA/133 [ 1.025832] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.026560] ata2.00: configured for UDMA/133 [ 1.026659] ata1.00: ATA-8: WDC WD5000AAKX-60U6AA0, 18.01H18, max UDMA/100 [ 1.026660] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.027877] ata1.00: configured for UDMA/100 [ 1.028040] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5 [ 1.028187] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.028217] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.028228] sd 0:0:0:0: [sda] Write Protect is off [ 1.028230] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.028244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.028282] scsi 1:0:0:0: Direct-Access ATA WDC WD10EURX-83U 1A01 PQ: 0 ANSI: 5 [ 1.028405] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.028453] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.028454] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.028466] sd 1:0:0:0: [sdb] Write Protect is off [ 1.028467] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.028481] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.029109] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.029326] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330) [ 1.029335] fbcon: Taking over console [ 1.029338] No Local Variables are initialized for Method [_GTF] [ 1.029339] No Arguments are initialized for method [_GTF] [ 1.029340] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 1.029347] ata5.00: ATAPI: ATAPI DVD A DH16A6S, YA16, max UDMA/100 [ 1.029978] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330) [ 1.029983] No Local Variables are initialized for Method [_GTF] [ 1.029984] No Arguments are initialized for method [_GTF] [ 1.029985] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 1.029991] ata5.00: configured for UDMA/100 [ 1.034143] scsi 4:0:0:0: CD-ROM ATAPI DVD A DH16A6S YA16 PQ: 0 ANSI: 5 [ 1.053484] sdb: sdb1 [ 1.053716] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.066517] sda: sda1 sda2 < sda5 > [ 1.067078] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.078741] Console: switching to colour frame buffer device 170x48 [ 1.095236] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.095237] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.117277] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.117326] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 1.161704] usb 5-1: New USB device found, idVendor=0424, idProduct=2137, bcdDevice=41.00 [ 1.161705] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.161706] usb 5-1: Product: USB2137 [ 1.161707] usb 5-1: Manufacturer: SMSC [ 1.164889] hub 5-1:1.0: USB hub found [ 1.164975] hub 5-1:1.0: 7 ports detected [ 1.169347] usb 3-6: New USB device found, idVendor=0e6f, idProduct=0413, bcdDevice= 1.00 [ 1.169349] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.169350] usb 3-6: Product: Afterglow Gamepad for Xbox 360 [ 1.169351] usb 3-6: Manufacturer: Performance Designed Products [ 1.169352] usb 3-6: SerialNumber: ... [ 1.301133] usb 3-10: new low-speed USB device number 4 using xhci_hcd [ 1.353134] tsc: Refined TSC clocksource calibration: 3398.030 MHz [ 1.353138] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30fb0a05005, max_idle_ns: 440795375639 ns [ 1.353158] clocksource: Switched to clocksource tsc [ 1.452673] usb 3-10: New USB device found, idVendor=0461, idProduct=4d0f, bcdDevice= 1.00 [ 1.452684] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.452685] usb 3-10: Product: USB Optical Mouse [ 1.452686] usb 3-10: Manufacturer: PixArt [ 1.457113] usb 5-1.7: new full-speed USB device number 3 using xhci_hcd [ 1.457266] hidraw: raw HID events driver (C) Jiri Kosina [ 1.465878] usbcore: registered new interface driver usbhid [ 1.465878] usbhid: USB HID core driver [ 1.467638] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:0461:0010.0001/input/input3 [ 1.525295] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-4/input0 [ 1.525417] input: NOVATEK USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0461:0010.0002/input/input4 [ 1.565139] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.585272] input: NOVATEK USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:0461:0010.0002/input/input5 [ 1.585368] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-4/input1 [ 1.585480] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:0461:4D0F.0003/input/input6 [ 1.585613] hid-generic 0003:0461:4D0F.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-10/input0 [ 1.592069] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330) [ 1.592112] No Local Variables are initialized for Method [_GTF] [ 1.592113] No Arguments are initialized for method [_GTF] [ 1.592114] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 1.595661] ata6.00: ATA-8: WDC WD3200AAKX-001CA0, 15.01H15, max UDMA/133 [ 1.595672] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.597173] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330) [ 1.597212] No Local Variables are initialized for Method [_GTF] [ 1.597213] No Arguments are initialized for method [_GTF] [ 1.597214] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 1.597492] ata6.00: configured for UDMA/133 [ 1.597682] scsi 5:0:0:0: Direct-Access ATA WDC WD3200AAKX-0 1H15 PQ: 0 ANSI: 5 [ 1.597935] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.597995] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.598004] sd 5:0:0:0: [sdc] Write Protect is off [ 1.598005] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.598020] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.627953] sdc: sdc1 [ 1.628202] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.664208] usb 5-1.7: New USB device found, idVendor=2149, idProduct=231c, bcdDevice=13.31 [ 1.664209] usb 5-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.664210] usb 5-1.7: Product: CoolTouch(TM) System [ 1.664210] usb 5-1.7: Manufacturer: Advanced Silicon S.A [ 1.677913] input: Advanced Silicon S.A CoolTouch(TM) System as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1.7/5-1.7:1.0/0003:2149:231C.0004/input/input7 [ 1.677981] hid-generic 0003:2149:231C.0004: input,hidraw3: USB HID v1.10 Device [Advanced Silicon S.A CoolTouch(TM) System] on usb-0000:04:00.0-1.7/input0 [ 1.678917] hid-generic 0003:2149:231C.0005: hiddev0,hidraw4: USB HID v1.10 Device [Advanced Silicon S.A CoolTouch(TM) System] on usb-0000:04:00.0-1.7/input1 [ 2.521112] raid6: avx2x4 gen() 28323 MB/s [ 2.569112] raid6: avx2x4 xor() 18129 MB/s [ 2.617113] raid6: avx2x2 gen() 24514 MB/s [ 2.665112] raid6: avx2x2 xor() 15778 MB/s [ 2.713114] raid6: avx2x1 gen() 21826 MB/s [ 2.761112] raid6: avx2x1 xor() 14680 MB/s [ 2.809113] raid6: sse2x4 gen() 15575 MB/s [ 2.857116] raid6: sse2x4 xor() 9898 MB/s [ 2.905116] raid6: sse2x2 gen() 13463 MB/s [ 2.953116] raid6: sse2x2 xor() 8709 MB/s [ 3.001115] raid6: sse2x1 gen() 11381 MB/s [ 3.049115] raid6: sse2x1 xor() 7959 MB/s [ 3.049115] raid6: using algorithm avx2x4 gen() 28323 MB/s [ 3.049116] raid6: .... xor() 18129 MB/s, rmw enabled [ 3.049116] raid6: using avx2x2 recovery algorithm [ 3.051303] xor: automatically using best checksumming function avx [ 3.064176] Btrfs loaded, crc32c=crc32c-intel [ 3.318374] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.255628] systemd[1]: Inserted module 'autofs4' [ 5.407125] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.425179] systemd[1]: Detected architecture x86-64. [ 5.459952] systemd[1]: Set hostname to ... [ 8.384520] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 8.824168] systemd[1]: Created slice system-modprobe.slice. [ 8.824411] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.824610] systemd[1]: Created slice User and Session Slice. [ 8.824659] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.824815] systemd[1]: Set up automount ... [ 8.824844] systemd[1]: Reached target User and Group Name Lookups. [ 8.824855] systemd[1]: Reached target Remote File Systems. [ 8.824862] systemd[1]: Reached target Slices. [ 8.824926] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.824997] systemd[1]: Listening on LVM2 poll daemon socket. [ 8.850582] systemd[1]: Listening on Syslog Socket. [ 8.851883] systemd[1]: Listening on Process Core Dump Socket. [ 8.851948] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.851987] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.852116] systemd[1]: Listening on Journal Audit Socket. [ 8.852177] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.852245] systemd[1]: Listening on Journal Socket. [ 8.852310] systemd[1]: Listening on udev Control Socket. [ 8.852363] systemd[1]: Listening on udev Kernel Socket. [ 8.853165] systemd[1]: Mounting Huge Pages File System... [ 8.853986] systemd[1]: Mounting POSIX Message Queue File System... [ 8.855120] systemd[1]: Mounting Kernel Debug File System... [ 8.855871] systemd[1]: Mounting Kernel Trace File System... [ 8.857029] systemd[1]: Starting Journal Service... [ 8.858178] systemd[1]: Starting Availability of block devices... [ 8.859504] systemd[1]: Starting Set the console keyboard layout... [ 8.860668] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.861799] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 8.861856] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.984409] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.984439] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.105733] systemd[1]: Starting Load Kernel Modules... [ 9.106524] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.107646] systemd[1]: Starting udev Coldplug all Devices... [ 9.108460] systemd[1]: Starting Uncomplicated firewall... [ 9.109996] systemd[1]: Mounted Huge Pages File System. [ 9.110116] systemd[1]: Mounted POSIX Message Queue File System. [ 9.110215] systemd[1]: Mounted Kernel Debug File System. [ 9.110309] systemd[1]: Mounted Kernel Trace File System. [ 9.110748] systemd[1]: Finished Availability of block devices. [ 9.111226] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.111661] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 9.170369] systemd[1]: Started Journal Service. [ 9.224919] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 9.645345] systemd-journald[335]: Received client request to flush runtime journal. [ 9.781136] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 9.929853] lp: driver loaded but no devices found [ 10.063795] ppdev: user-space parallel port driver [ 10.469343] bpfilter: Loaded bpfilter_umh pid 374 [ 10.469533] Started bpfilter [ 14.085857] asus_wmi: ASUS WMI generic driver loaded [ 14.141631] asus_wmi: Initialization: 0x0 [ 14.141684] asus_wmi: BIOS WMI version: 0.9 [ 14.141770] asus_wmi: SFUN value: 0x0 [ 14.141773] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 14.142565] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8 [ 14.421752] input: Afterglow AX.1 Gamepad for Xbox 360 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input9 [ 14.425206] usbcore: registered new interface driver xpad [ 14.427070] input: Advanced Silicon S.A CoolTouch(TM) System as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1.7/5-1.7:1.0/0003:2149:231C.0004/input/input10 [ 14.427170] hid-multitouch 0003:2149:231C.0004: input,hidraw3: USB HID v1.10 Device [Advanced Silicon S.A CoolTouch(TM) System] on usb-0000:04:00.0-1.7/input0 [ 14.730259] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 14.730260] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 14.730261] RAPL PMU: hw unit of domain package 2^-14 Joules [ 14.730262] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 14.730262] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 14.925546] kvm: disabled by bios [ 14.974266] kvm: disabled by bios [ 15.018214] kvm: disabled by bios [ 15.050169] kvm: disabled by bios [ 15.248095] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 15.302370] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 15.302441] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 15.302496] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 15.420412] intel_rapl_common: Found RAPL domain package [ 15.420414] intel_rapl_common: Found RAPL domain core [ 15.420415] intel_rapl_common: Found RAPL domain uncore [ 15.420415] intel_rapl_common: Found RAPL domain dram [ 15.636953] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 15.636955] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.636956] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 15.636956] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 15.636957] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 15.636958] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 15.636959] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 15.636959] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 15.636960] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 15.649508] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 15.649562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 15.649614] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 15.649669] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 15.649718] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 34.849457] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 34.970176] r8169 0000:03:00.0 enp3s0: Link is Down [ 37.879211] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 37.879231] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 80.202593] usb 6-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 80.227321] usb 6-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.09 [ 80.227325] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 80.227328] usb 6-2: Product: External Disk 3.0 [ 80.227330] usb 6-2: Manufacturer: JMicron [ 80.227332] usb 6-2: SerialNumber: ... [ 80.589174] usbcore: registered new interface driver usb-storage [ 80.668029] scsi host6: uas [ 80.668337] usbcore: registered new interface driver uas [ 80.669029] scsi 6:0:0:0: Direct-Access JMicron Tech 0409 PQ: 0 ANSI: 6 [ 80.670404] scsi 6:0:0:0: Attached scsi generic sg4 type 0 [ 80.672992] sd 6:0:0:0: [sdd] 732566646 4096-byte logical blocks: (3.00 TB/2.73 TiB) [ 80.673167] sd 6:0:0:0: [sdd] Write Protect is off [ 80.673173] sd 6:0:0:0: [sdd] Mode Sense: 53 00 00 08 [ 80.673491] sd 6:0:0:0: [sdd] Disabling FUA [ 80.673497] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 80.674319] sd 6:0:0:0: [sdd] Optimal transfer size 33550336 bytes [ 80.762718] sdd: sdd1 sdd3 [ 80.764485] sd 6:0:0:0: [sdd] Attached SCSI disk [ 611.722181] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 611.826264] JFS: nTxBlock = 8192, nTxLock = 65536 [ 611.859817] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 611.924696] QNX4 filesystem 0.2.3 registered. [ 1202.870235] ata1.00: exception Emask 0x10 SAct 0x800200 SErr 0x400100 action 0x6 frozen [ 1202.870237] ata1.00: irq_stat 0x08000000, interface fatal error [ 1202.870239] ata1: SError: { UnrecovData Handshk } [ 1202.870240] ata1.00: failed command: WRITE FPDMA QUEUED [ 1202.870243] ata1.00: cmd 61/20:48:40:4e:16/00:00:00:00:00/40 tag 9 ncq dma 16384 out res 40/00:4c:40:4e:16/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 1202.870244] ata1.00: status: { DRDY } [ 1202.870245] ata1.00: failed command: READ FPDMA QUEUED [ 1202.870247] ata1.00: cmd 60/08:b8:48:78:d6/00:00:2f:00:00/40 tag 23 ncq dma 4096 in res 40/00:4c:40:4e:16/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 1202.870248] ata1.00: status: { DRDY } [ 1202.870250] ata1: hard resetting link [ 1203.184790] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1203.187202] ata1.00: configured for UDMA/100 [ 1203.187218] sd 0:0:0:0: [sda] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1203.187220] sd 0:0:0:0: [sda] tag#23 Sense Key : Illegal Request [current] [ 1203.187223] sd 0:0:0:0: [sda] tag#23 Add. Sense: Unaligned write command [ 1203.187225] sd 0:0:0:0: [sda] tag#23 CDB: Read(10) 28 00 2f d6 78 48 00 00 08 00 [ 1203.187228] blk_update_request: I/O error, dev sda, sector 802584648 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 1203.187242] ata1: EH complete [ 1213.282441] ata1.00: exception Emask 0x10 SAct 0x7fe7000f SErr 0x400100 action 0x6 frozen [ 1213.282445] ata1.00: irq_stat 0x08000000, interface fatal error [ 1213.282447] ata1: SError: { UnrecovData Handshk } [ 1213.282450] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282454] ata1.00: cmd 61/08:00:d0:11:51/00:00:1d:00:00/40 tag 0 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282456] ata1.00: status: { DRDY } [ 1213.282457] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282459] ata1.00: cmd 61/08:08:00:10:10/00:00:23:00:00/40 tag 1 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282460] ata1.00: status: { DRDY } [ 1213.282461] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282463] ata1.00: cmd 61/08:10:80:10:10/00:00:23:00:00/40 tag 2 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282464] ata1.00: status: { DRDY } [ 1213.282465] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282467] ata1.00: cmd 61/08:18:f8:16:10/00:00:23:00:00/40 tag 3 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282468] ata1.00: status: { DRDY } [ 1213.282469] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282472] ata1.00: cmd 61/08:80:38:14:d0/00:00:08:00:00/40 tag 16 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282472] ata1.00: status: { DRDY } [ 1213.282473] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282476] ata1.00: cmd 61/08:88:60:20:d0/00:00:08:00:00/40 tag 17 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282476] ata1.00: status: { DRDY } [ 1213.282478] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282481] ata1.00: cmd 61/08:90:20:54:d4/00:00:08:00:00/40 tag 18 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282483] ata1.00: status: { DRDY } [ 1213.282485] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282488] ata1.00: cmd 61/08:a8:40:10:10/00:00:0a:00:00/40 tag 21 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282489] ata1.00: status: { DRDY } [ 1213.282489] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282492] ata1.00: cmd 61/08:b0:48:10:90/00:00:0c:00:00/40 tag 22 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282492] ata1.00: status: { DRDY } [ 1213.282493] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282496] ata1.00: cmd 61/10:b8:08:10:50/00:00:1d:00:00/40 tag 23 ncq dma 8192 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282496] ata1.00: status: { DRDY } [ 1213.282497] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282499] ata1.00: cmd 61/10:c0:80:10:50/00:00:1d:00:00/40 tag 24 ncq dma 8192 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282500] ata1.00: status: { DRDY } [ 1213.282501] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282503] ata1.00: cmd 61/08:c8:00:11:50/00:00:1d:00:00/40 tag 25 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282504] ata1.00: status: { DRDY } [ 1213.282505] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282507] ata1.00: cmd 61/08:d0:18:11:50/00:00:1d:00:00/40 tag 26 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282509] ata1.00: status: { DRDY } [ 1213.282510] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282514] ata1.00: cmd 61/08:d8:08:14:50/00:00:1d:00:00/40 tag 27 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282516] ata1.00: status: { DRDY } [ 1213.282516] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282519] ata1.00: cmd 61/08:e0:e0:14:50/00:00:1d:00:00/40 tag 28 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282519] ata1.00: status: { DRDY } [ 1213.282520] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282522] ata1.00: cmd 61/08:e8:40:24:50/00:00:1d:00:00/40 tag 29 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282523] ata1.00: status: { DRDY } [ 1213.282524] ata1.00: failed command: WRITE FPDMA QUEUED [ 1213.282527] ata1.00: cmd 61/08:f0:18:11:51/00:00:1d:00:00/40 tag 30 ncq dma 4096 out res 40/00:1c:f8:16:10/00:00:23:00:00/40 Emask 0x10 (ATA bus error) [ 1213.282527] ata1.00: status: { DRDY } [ 1213.282530] ata1: hard resetting link [ 1213.600661] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1213.603466] ata1.00: configured for UDMA/100 [ 1213.603487] ata1: EH complete [ 1222.150618] ata1.00: exception Emask 0x10 SAct 0x200 SErr 0x400100 action 0x6 frozen [ 1222.150623] ata1.00: irq_stat 0x08000000, interface fatal error [ 1222.150625] ata1: SError: { UnrecovData Handshk } [ 1222.150626] ata1.00: failed command: WRITE FPDMA QUEUED [ 1222.150629] ata1.00: cmd 61/08:48:18:62:16/00:00:00:00:00/40 tag 9 ncq dma 4096 out res 40/00:4c:18:62:16/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 1222.150630] ata1.00: status: { DRDY } [ 1222.150632] ata1: hard resetting link [ 1222.464809] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1222.467366] ata1.00: configured for UDMA/100 [ 1222.467376] ata1: EH complete [ 1265.559490] ata1: limiting SATA link speed to 3.0 Gbps [ 1265.559493] ata1.00: exception Emask 0x10 SAct 0x10 SErr 0x400100 action 0x6 frozen [ 1265.559496] ata1.00: irq_stat 0x08000000, interface fatal error [ 1265.559499] ata1: SError: { UnrecovData Handshk } [ 1265.559501] ata1.00: failed command: WRITE FPDMA QUEUED [ 1265.559505] ata1.00: cmd 61/28:20:f8:10:15/00:00:00:00:00/40 tag 4 ncq dma 20480 out res 40/00:24:f8:10:15/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 1265.559506] ata1.00: status: { DRDY } [ 1265.559509] ata1: hard resetting link [ 1265.874099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 1265.876508] ata1.00: configured for UDMA/100 [ 1265.876519] ata1: EH complete