[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26 [ 0.000000] Linux version 5.4.2-xanmod2 (XXX@XXX) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1.191205 SMP PREEMPT Thu Dec 5 09:52:48 -03 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-xanmod2 root=UUID=HASH_4AD-ADEC-70E9-CBB5-947A6320E4D4 ro splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009546ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000095470000-0x0000000095d6ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d70000-0x000000009cabefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Acer Aspire VN7-791G/Aspire VN7-791G, BIOS V1.14 08/06/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.996 MHz processor [ 0.001339] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001340] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001344] last_pfn = 0x45f600 max_arch_pfn = 0x400000000 [ 0.001348] MTRR default type: uncachable [ 0.001349] MTRR fixed ranges enabled: [ 0.001350] 00000-9FFFF write-back [ 0.001350] A0000-BFFFF uncachable [ 0.001351] C0000-E7FFF write-protect [ 0.001351] E8000-EFFFF write-combining [ 0.001352] F0000-FFFFF write-protect [ 0.001352] MTRR variable ranges enabled: [ 0.001353] 0 base 0000000000 mask 7800000000 write-back [ 0.001354] 1 base 009D000000 mask 7FFF000000 uncachable [ 0.001354] 2 base 009E000000 mask 7FFE000000 uncachable [ 0.001355] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.001355] 4 base 00C0000000 mask 7FC0000000 uncachable [ 0.001356] 5 disabled [ 0.001356] 6 disabled [ 0.001356] 7 disabled [ 0.001357] 8 disabled [ 0.001357] 9 disabled [ 0.001619] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001971] total RAM covered: 31184M [ 0.002257] Found optimal setting for mtrr clean up [ 0.002258] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.002486] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved [ 0.002488] last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.008723] check: Scanning 1 areas for low memory corruption [ 0.008727] Using GB pages for direct mapping [ 0.008728] BRK [0x284801000, 0x284801fff] PGTABLE [ 0.008729] BRK [0x284802000, 0x284802fff] PGTABLE [ 0.008730] BRK [0x284803000, 0x284803fff] PGTABLE [ 0.008762] BRK [0x284804000, 0x284804fff] PGTABLE [ 0.008763] BRK [0x284805000, 0x284805fff] PGTABLE [ 0.008905] BRK [0x284806000, 0x284806fff] PGTABLE [ 0.008936] BRK [0x284807000, 0x284807fff] PGTABLE [ 0.008982] BRK [0x284808000, 0x284808fff] PGTABLE [ 0.009039] BRK [0x284809000, 0x284809fff] PGTABLE [ 0.009082] BRK [0x28480a000, 0x28480afff] PGTABLE [ 0.009131] RAMDISK: [mem 0x2f403000-0x339f8fff] [ 0.009143] ACPI: Early table checksum verification disabled [ 0.009145] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.009148] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.009152] ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009156] ACPI: DSDT 0x000000009CFE5000 00F702 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.009158] ACPI: FACS 0x000000009CFB9000 000040 [ 0.009160] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009162] ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009165] ACPI: MSDM 0x000000009CFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009167] ACPI: ASF! 0x000000009CFF9000 0000A0 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009169] ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009171] ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009173] ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009175] ACPI: SSDT 0x000000009CFE3000 000833 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.009177] ACPI: BOOT 0x000000009CFE1000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009179] ACPI: LPIT 0x000000009CFE0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.009181] ACPI: ASPT 0x000000009CFDE000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009183] ACPI: DBGP 0x000000009CFDD000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009185] ACPI: SSDT 0x000000009CFD5000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.009187] ACPI: SSDT 0x000000009CFD4000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.009189] ACPI: SSDT 0x000000009CFD0000 0034DD (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.009191] ACPI: SSDT 0x000000009CFCB000 003E4B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.009193] ACPI: DMAR 0x000000009CFE4000 0000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.009199] ACPI: Local APIC address 0xfee00000 [ 0.009271] No NUMA configuration found [ 0.009272] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff] [ 0.009279] NODE_DATA(0) allocated [mem 0x45f5d5000-0x45f5fffff] [ 0.009439] Zone ranges: [ 0.009440] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009441] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009442] Normal [mem 0x0000000100000000-0x000000045f5fffff] [ 0.009443] Device empty [ 0.009444] Movable zone start for each node [ 0.009447] Early memory node ranges [ 0.009447] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.009448] node 0: [mem 0x0000000000100000-0x000000009546ffff] [ 0.009449] node 0: [mem 0x0000000095d70000-0x000000009cabefff] [ 0.009450] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.009450] node 0: [mem 0x0000000100000000-0x000000045f5fffff] [ 0.009570] Zeroed struct page in unavailable ranges: 16036 pages [ 0.009571] Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff] [ 0.009572] On node 0 totalpages: 4175708 [ 0.009573] DMA zone: 64 pages used for memmap [ 0.009574] DMA zone: 21 pages reserved [ 0.009574] DMA zone: 3996 pages, LIFO batch:0 [ 0.009611] DMA32 zone: 9927 pages used for memmap [ 0.009612] DMA32 zone: 635328 pages, LIFO batch:63 [ 0.016239] Normal zone: 55256 pages used for memmap [ 0.016240] Normal zone: 3536384 pages, LIFO batch:63 [ 0.046361] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff] [ 0.046484] ACPI: PM-Timer IO Port: 0x1808 [ 0.046486] ACPI: Local APIC address 0xfee00000 [ 0.046499] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.046501] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.046503] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.046504] ACPI: IRQ0 used by override. [ 0.046504] ACPI: IRQ9 used by override. [ 0.046506] Using ACPI (MADT) for SMP configuration information [ 0.046507] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.046510] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.046522] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.046523] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.046523] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.046524] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.046525] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.046526] PM: Registered nosave memory: [mem 0x95470000-0x95d6ffff] [ 0.046527] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff] [ 0.046527] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff] [ 0.046528] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.046529] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff] [ 0.046530] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.046530] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.046531] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.046531] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.046532] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.046532] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.046533] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.046533] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.046534] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.046534] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.046536] [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.046537] Booting paravirtualized kernel on bare hardware [ 0.046539] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns [ 0.136917] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.137098] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.137104] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.137104] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.137123] Built 1 zonelists, mobility grouping on. Total pages: 4110440 [ 0.137124] Policy zone: Normal [ 0.137125] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-xanmod2 root=UUID=HASH_4AD-ADEC-70E9-CBB5-947A6320E4D4 ro splash vt.handoff=1 [ 0.137905] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.138282] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.138337] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.141350] Calgary: detecting Calgary via BIOS EBDA area [ 0.141351] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.177210] Memory: 16239592K/16702832K available (14339K kernel code, 2430K rwdata, 4676K rodata, 2580K init, 4984K bss, 463240K reserved, 0K cma-reserved) [ 0.177318] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.177327] Kernel/User page tables isolation: enabled [ 0.177339] ftrace: allocating 43637 entries in 171 pages [ 0.189570] rcu: Preemptible hierarchical RCU implementation. [ 0.189571] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.189572] rcu: RCU priority boosting: priority 1 delay 0 ms. [ 0.189573] Tasks RCU enabled. [ 0.189574] rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies. [ 0.189574] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.191429] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.191620] random: crng done (trusting CPU's manufacturer) [ 0.191638] Console: colour dummy device 80x25 [ 0.191803] printk: console [tty0] enabled [ 0.191816] ACPI: Core revision 20190816 [ 0.191936] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.191948] APIC: Switch to symmetric I/O mode setup [ 0.191951] DMAR: Host address width 39 [ 0.191952] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.191957] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.191959] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.191962] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.191964] DMAR: RMRR base: 0x0000009cdc6000 end: 0x0000009cde5fff [ 0.191966] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff [ 0.191968] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.191970] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.191972] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.192362] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.192364] x2apic enabled [ 0.192374] Switched APIC routing to cluster x2apic. [ 0.192755] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.201953] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564143601c, max_idle_ns: 440795231101 ns [ 0.201959] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.99 BogoMIPS (lpj=5187992) [ 0.201962] pid_max: default: 32768 minimum: 301 [ 0.201985] LSM: Security Framework initializing [ 0.201995] Yama: becoming mindful. [ 0.202029] AppArmor: AppArmor initialized [ 0.202080] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.202111] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.202124] *** VALIDATE tmpfs *** [ 0.202231] *** VALIDATE proc *** [ 0.202271] *** VALIDATE cgroup1 *** [ 0.202273] *** VALIDATE cgroup2 *** [ 0.202313] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.202325] process: using mwait in idle threads [ 0.202328] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.202330] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.202333] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.202336] Spectre V2 : Mitigation: Full generic retpoline [ 0.202337] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.202339] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.202341] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.202343] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.202345] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.202349] MDS: Mitigation: Clear CPU buffers [ 0.202487] Freeing SMP alternatives memory: 36K [ 0.203517] TSC deadline timer enabled [ 0.203520] smpboot: CPU0: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.213974] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.213990] ... version: 3 [ 0.213991] ... bit width: 48 [ 0.213992] ... generic registers: 4 [ 0.213994] ... value mask: 0000ffffffffffff [ 0.213995] ... max period: 00007fffffffffff [ 0.213996] ... fixed-purpose events: 3 [ 0.213997] ... event mask: 000000070000000f [ 0.217972] rcu: Hierarchical SRCU implementation. [ 0.230313] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.233973] smp: Bringing up secondary CPUs ... [ 0.257981] x86: Booting SMP configuration: [ 0.257983] .... node #0, CPUs: #1 [ 0.258784] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.281983] #2 #3 #4 #5 #6 #7 [ 0.402246] smp: Brought up 1 node, 8 CPUs [ 0.402246] smpboot: Max logical packages: 1 [ 0.402246] smpboot: Total of 8 processors activated (41503.93 BogoMIPS) [ 0.404314] devtmpfs: initialized [ 0.404314] x86/mm: Memory block size: 128MB [ 0.405082] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.405082] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns [ 0.405082] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.405082] pinctrl core: initialized pinctrl subsystem [ 0.405082] PM: RTC time: 04:35:00, date: 2019-12-18 [ 0.405082] NET: Registered protocol family 16 [ 0.405987] EISA bus registered [ 0.405995] cpuidle: using governor ladder [ 0.405999] cpuidle: using governor menu [ 0.406028] Simple Boot Flag at 0x44 set to 0x1 [ 0.406039] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.406041] ACPI: bus type PCI registered [ 0.406043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.406091] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.406101] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.406112] PCI: Using configuration type 1 for base access [ 0.406131] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.406696] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.406859] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406859] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408046] ACPI: Added _OSI(Module Device) [ 0.408049] ACPI: Added _OSI(Processor Device) [ 0.408051] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.408053] ACPI: Added _OSI(Processor Aggregator Device) [ 0.408055] ACPI: Added _OSI(Linux-Dell-Video) [ 0.408057] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.408059] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.419775] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.420199] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.421572] ACPI: Dynamic OEM Table Load: [ 0.421579] ACPI: SSDT 0xFFFF9C988C99A000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115) [ 0.422423] ACPI: Dynamic OEM Table Load: [ 0.422429] ACPI: SSDT 0xFFFF9C988C941800 0005AA (v01 PmRef ApIst 00003000 INTL 20131115) [ 0.423291] ACPI: Dynamic OEM Table Load: [ 0.423296] ACPI: SSDT 0xFFFF9C988C4F0400 000119 (v01 PmRef ApCst 00003000 INTL 20131115) [ 0.425253] ACPI: EC: EC started [ 0.425255] ACPI: EC: interrupt blocked [ 0.428178] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.428181] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.428184] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.428185] ACPI: Interpreter enabled [ 0.428213] ACPI: (supports S0 S3 S4 S5) [ 0.428215] ACPI: Using IOAPIC for interrupt routing [ 0.428240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.428467] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.453692] ACPI: Power Resource [PG00] (on) [ 0.459270] ACPI: Power Resource [FN00] (off) [ 0.459333] ACPI: Power Resource [FN01] (off) [ 0.459392] ACPI: Power Resource [FN02] (off) [ 0.459451] ACPI: Power Resource [FN03] (off) [ 0.459511] ACPI: Power Resource [FN04] (off) [ 0.460234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.460240] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.462400] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.462403] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.462985] PCI host bridge to bus 0000:00 [ 0.462988] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.462990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.462992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.462994] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.462996] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.463004] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.463138] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.463172] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.463355] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.463364] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit] [ 0.463370] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.463374] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.463529] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.463537] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit] [ 0.463696] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.463716] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit] [ 0.463769] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.463903] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.463924] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit] [ 0.463986] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.464124] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.464592] pci 0000:00:1a.0: reg 0x10: [mem 0xd171d000-0xd171d3ff] [ 0.465996] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.466139] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.466158] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit] [ 0.466219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.466355] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400 [ 0.466433] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.466620] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.466699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.466884] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.467336] pci 0000:00:1d.0: reg 0x10: [mem 0xd171c000-0xd171c3ff] [ 0.468685] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.468833] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.469059] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.469075] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.469082] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.469089] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.469096] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.469103] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.469111] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff] [ 0.469143] pci 0000:00:1f.2: PME# supported from D3hot [ 0.469275] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.469292] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit] [ 0.469310] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.469488] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200 [ 0.469514] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff] [ 0.469530] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.469547] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.469558] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.469569] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.469588] pci 0000:01:00.0: Enabling HDA controller [ 0.469660] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.469742] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.469745] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.469747] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.469751] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.469867] pci 0000:07:00.0: [168c:003e] type 00 class 0x028000 [ 0.469926] pci 0000:07:00.0: reg 0x10: [mem 0xd1400000-0xd15fffff 64bit] [ 0.470145] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.470374] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.470380] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd15fffff] [ 0.470482] pci 0000:08:00.0: [14e4:1692] type 00 class 0x020000 [ 0.470534] pci 0000:08:00.0: reg 0x10: [mem 0xd1600000-0xd160ffff 64bit] [ 0.470618] pci 0000:08:00.0: enabling Extended Tags [ 0.470745] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.470901] pci 0000:00:1c.3: PCI bridge to [bus 08] [ 0.470907] pci 0000:00:1c.3: bridge window [mem 0xd1600000-0xd16fffff] [ 0.471840] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.471909] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.471985] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.472057] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.472128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.472191] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.472253] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.472310] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.472714] ACPI: EC: interrupt unblocked [ 0.472727] ACPI: EC: event unblocked [ 0.472734] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.472736] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.472797] iommu: Default domain type: Translated [ 0.472797] SCSI subsystem initialized [ 0.472797] libata version 3.00 loaded. [ 0.472797] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.472797] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.472797] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.472797] vgaarb: loaded [ 0.472797] ACPI: bus type USB registered [ 0.472797] usbcore: registered new interface driver usbfs [ 0.472797] usbcore: registered new interface driver hub [ 0.472797] usbcore: registered new device driver usb [ 0.472797] pps_core: LinuxPPS API ver. 1 registered [ 0.472797] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.472797] PTP clock support registered [ 0.472797] EDAC MC: Ver: 3.0.0 [ 0.472797] PCI: Using ACPI for IRQ routing [ 0.478657] PCI: pci_cache_line_size set to 64 bytes [ 0.478844] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.478845] e820: reserve RAM buffer [mem 0x95470000-0x97ffffff] [ 0.478845] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff] [ 0.478846] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.478847] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff] [ 0.478916] NetLabel: Initializing [ 0.478918] NetLabel: domain hash size = 128 [ 0.478919] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.478933] NetLabel: unlabeled traffic allowed by default [ 0.478944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.478944] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.480979] clocksource: Switched to clocksource tsc-early [ 0.489030] *** VALIDATE bpf *** [ 0.489097] VFS: Disk quotas dquot_6.6.0 [ 0.489110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.489131] *** VALIDATE ramfs *** [ 0.489135] *** VALIDATE hugetlbfs *** [ 0.489191] AppArmor: AppArmor Filesystem Enabled [ 0.489214] pnp: PnP ACPI init [ 0.489372] system 00:00: [io 0xffff] has been reserved [ 0.489375] system 00:00: [io 0xffff] has been reserved [ 0.489376] system 00:00: [io 0xffff] has been reserved [ 0.489378] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.489381] system 00:00: [mem 0xfe802000-0xfe811fff] has been reserved [ 0.489385] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.489429] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.489432] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.489448] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.489484] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.489488] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.489543] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.489666] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.489669] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.489671] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.489673] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.489675] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.489677] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.489680] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.489682] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.489684] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.489686] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved [ 0.489688] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.489691] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490319] pnp: PnP ACPI: found 6 devices [ 0.491170] thermal_sys: Registered thermal governor 'fair_share' [ 0.491170] thermal_sys: Registered thermal governor 'bang_bang' [ 0.491172] thermal_sys: Registered thermal governor 'step_wise' [ 0.491174] thermal_sys: Registered thermal governor 'user_space' [ 0.491175] thermal_sys: Registered thermal governor 'power_allocator' [ 0.495741] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.495765] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.495774] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref] [ 0.495777] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.495779] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.495782] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.495785] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.495789] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.495799] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd15fffff] [ 0.495806] pci 0000:00:1c.3: PCI bridge to [bus 08] [ 0.495811] pci 0000:00:1c.3: bridge window [mem 0xd1600000-0xd16fffff] [ 0.495819] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.495821] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.495823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.495825] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 0.495827] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.495829] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff] [ 0.495831] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.495833] pci_bus 0000:07: resource 1 [mem 0xd1400000-0xd15fffff] [ 0.495835] pci_bus 0000:08: resource 1 [mem 0xd1600000-0xd16fffff] [ 0.495931] NET: Registered protocol family 2 [ 0.496056] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.496122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.496255] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.496311] TCP: Hash tables configured (established 131072 bind 65536) [ 0.496344] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.496379] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.496424] NET: Registered protocol family 1 [ 0.496428] NET: Registered protocol family 44 [ 0.496437] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.512063] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x645 took 13803 usecs [ 0.526084] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 13671 usecs [ 0.526198] PCI: CLS 64 bytes, default 64 [ 0.526235] Trying to unpack rootfs image as initramfs... [ 1.260796] Freeing initrd memory: 71640K [ 1.269999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.270002] software IO TLB: mapped [mem 0x98abf000-0x9cabf000] (64MB) [ 1.270258] check: Scanning for low memory corruption every 60 seconds [ 1.271559] Initialise system trusted keyrings [ 1.271570] Key type blacklist registered [ 1.271605] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.272764] zbud: loaded [ 1.273084] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.273191] fuse: init (API version 7.31) [ 1.273203] *** VALIDATE fuse *** [ 1.273205] *** VALIDATE fuse *** [ 1.273301] Platform Keyring initialized [ 1.276975] Key type asymmetric registered [ 1.276978] Asymmetric key parser 'x509' registered [ 1.276985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.277016] io scheduler mq-deadline registered [ 1.277017] io scheduler kyber registered [ 1.277038] io scheduler bfq registered [ 1.277289] pcieport 0000:00:01.0: PME: Signaling with IRQ 26 [ 1.277442] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27 [ 1.277612] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28 [ 1.277680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.277722] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.277724] vesafb: scrolling: redraw [ 1.277726] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.277738] vesafb: framebuffer at 0xc0000000, mapped to 0x0000000034bead89, using 8128k, total 8128k [ 1.404534] Console: switching to colour frame buffer device 240x67 [ 1.530853] fb0: VESA VGA frame buffer device [ 1.531256] intel_idle: MWAIT substates: 0x42120 [ 1.531257] intel_idle: v0.4.1 model 0x3C [ 1.531520] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.531706] ACPI: AC Adapter [ADP1] (on-line) [ 1.532185] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.532955] ACPI: Power Button [PWRB] [ 1.533308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.536013] ACPI: Lid Switch [LID0] [ 1.536349] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.537168] ACPI: Sleep Button [SLPB] [ 1.537506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.540006] ACPI: Power Button [PWRF] [ 1.542354] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.542989] ACPI: Thermal Zone [TZ00] (28 C) [ 1.543697] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.544206] ACPI: Thermal Zone [TZ01] (30 C) [ 1.545152] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.545658] ACPI: Thermal Zone [TZS0] (81 C) [ 1.546250] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.546731] ACPI: Thermal Zone [TZS1] (48 C) [ 1.547244] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.547934] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.549201] Linux agpgart interface v0.103 [ 1.551225] loop: module loaded [ 1.551674] libphy: Fixed MDIO Bus: probed [ 1.552099] tun: Universal TUN/TAP device driver, 1.6 [ 1.552554] PPP generic driver version 2.4.2 [ 1.552976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.553541] ehci-pci: EHCI PCI platform driver [ 1.554049] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.554499] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.555145] ehci-pci 0000:00:1a.0: debug port 2 [ 1.559455] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.560132] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd171d000 [ 1.570027] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.570730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.571554] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.572169] usb usb1: Product: EHCI Host Controller [ 1.572601] usb usb1: Manufacturer: Linux 5.4.2-xanmod2 ehci_hcd [ 1.573109] usb usb1: SerialNumber: ... [ 1.573677] hub 1-0:1.0: USB hub found [ 1.574021] hub 1-0:1.0: 2 ports detected [ 1.574597] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.575042] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.600321] ehci-pci 0000:00:1d.0: debug port 2 [ 1.629214] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.653965] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd171c000 [ 1.688028] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.712836] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.737767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.763010] usb usb2: Product: EHCI Host Controller [ 1.788288] usb usb2: Manufacturer: Linux 5.4.2-xanmod2 ehci_hcd [ 1.814014] usb usb2: SerialNumber: ... [ 1.839670] hub 2-0:1.0: USB hub found [ 1.865136] hub 2-0:1.0: 2 ports detected [ 1.890395] ehci-platform: EHCI generic platform driver [ 1.905985] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.915834] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.968093] ohci-pci: OHCI PCI platform driver [ 1.993702] ohci-platform: OHCI generic platform driver [ 2.019671] uhci_hcd: USB Universal Host Controller Interface driver [ 2.046095] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.072320] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.078354] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 2.100299] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 2.126875] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.127245] hub 1-1:1.0: USB hub found [ 2.154653] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.184110] hub 1-1:1.0: 6 ports detected [ 2.210381] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.211986] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.271991] tsc: Refined TSC clocksource calibration: 2593.983 MHz [ 2.292945] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.321194] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640843b7b, max_idle_ns: 440795302848 ns [ 2.406269] usb usb3: Product: xHCI Host Controller [ 2.406269] clocksource: Switched to clocksource tsc [ 2.424354] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 2.434011] usb usb3: Manufacturer: Linux 5.4.2-xanmod2 xhci-hcd [ 2.434012] usb usb3: SerialNumber: ... [ 2.434147] hub 3-0:1.0: USB hub found [ 2.461754] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.462124] hub 2-1:1.0: USB hub found [ 2.489684] hub 3-0:1.0: 14 ports detected [ 2.519724] hub 2-1:1.0: 8 ports detected [ 2.546432] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.705202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.731440] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.754000] usb usb3-port1: couldn't allocate usb_device [ 2.757671] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 2.811088] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.837545] usb usb4: Product: xHCI Host Controller [ 2.864113] usb usb4: Manufacturer: Linux 5.4.2-xanmod2 xhci-hcd [ 2.890700] usb usb4: SerialNumber: ... [ 2.901988] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 2.917761] hub 4-0:1.0: USB hub found [ 2.972500] hub 4-0:1.0: 4 ports detected [ 2.999478] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1 [ 3.026335] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.054840] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.077393] usb 3-2: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=85.60 [ 3.082631] mousedev: PS/2 mouse device common for all mice [ 3.111720] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.111721] usb 3-2: Product: USB 2.0 HUB [ 3.112324] hub 3-2:1.0: USB hub found [ 3.141274] rtc_cmos 00:02: RTC can wake from S4 [ 3.170623] hub 3-2:1.0: 4 ports detected [ 3.227394] rtc_cmos 00:02: registered as rtc0 [ 3.338550] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.350119] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.367038] i2c /dev entries driver [ 3.367089] device-mapper: uevent: version 1.0.3 [ 3.379986] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 3.480498] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 3.509917] platform eisa.0: Probing EISA bus 0 [ 3.512346] usb 3-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.539714] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 3.539715] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 3.570384] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.591988] usb 3-2.2: new high-speed USB device number 4 using xhci_hcd [ 3.600638] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 3.631341] usb 3-4: Product: USB2.0-CRW [ 3.661637] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 3.661638] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 3.661638] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 3.661639] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 3.661640] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 3.692488] usb 3-4: Manufacturer: Generic [ 3.702968] usb 3-2.2: New USB device found, idVendor=13fe, idProduct=5200, bcdDevice= 1.10 [ 3.702969] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.702970] usb 3-2.2: Product: Patriot Memory [ 3.702970] usb 3-2.2: Manufacturer: [ 3.702971] usb 3-2.2: SerialNumber: ... [ 3.723373] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 3.723374] platform eisa.0: EISA: Detected 0 cards [ 3.723389] intel_pstate: Intel P-state driver initializing [ 3.820054] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 3.847653] usb 3-4: SerialNumber: ... [ 4.220440] ledtrig-cpu: registered to indicate activity on CPUs [ 4.237146] usb 4-1: New USB device found, idVendor=0bc2, idProduct=ab21, bcdDevice= 1.43 [ 4.248546] drop_monitor: Initializing network drop monitor service [ 4.276101] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.303544] NET: Registered protocol family 10 [ 4.331051] usb 4-1: Product: BUP Slim RD [ 4.364431] Segment Routing with IPv6 [ 4.386236] usb 4-1: Manufacturer: Seagate [ 4.413463] NET: Registered protocol family 17 [ 4.440671] usb 4-1: SerialNumber: ... [ 4.467851] Key type dns_resolver registered [ 4.495982] usb 3-2.4: new high-speed USB device number 5 using xhci_hcd [ 4.549356] RAS: Correctable Errors collector initialized. [ 4.576707] microcode: sig=0x306c3, pf=0x20, revision=0x27 [ 4.604572] microcode: Microcode Update Driver: v2.2. [ 4.604575] IPI shorthand broadcast: enabled [ 4.658265] sched_clock: Marking stable (4657883114, 365744)->(9001674689, -4343425831) [ 4.667823] usb 3-2.4: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.14 [ 4.713608] usb 3-2.4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 4.741399] usb 3-2.4: Product: Elements 25A1 [ 4.768999] usb 3-2.4: Manufacturer: Western Digital [ 4.769104] registered taskstats version 1 [ 4.783988] usb 3-5: new high-speed USB device number 6 using xhci_hcd [ 4.796449] usb 3-2.4: SerialNumber: ... [ 4.877142] Loading compiled-in X.509 certificates [ 4.905681] Loaded X.509 cert 'Build time autogenerated kernel key: c2fe9a0ee199d850ff8f39815b5baa1f7cccde4a' [ 4.916267] usb 3-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 4.934027] zswap: loaded using pool lz4/zbud [ 4.962567] usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 5.018715] usb 3-5: Product: USB 2.0 Hub [ 5.046812] Key type ._fscrypt registered [ 5.047509] hub 3-5:1.0: USB hub found [ 5.074261] Key type .fscrypt registered [ 5.079490] Key type big_key registered [ 5.102630] hub 3-5:1.0: 4 ports detected [ 5.132373] Key type encrypted registered [ 5.211770] AppArmor: AppArmor sha1 policy hashing enabled [ 5.238669] ima: No TPM chip found, activating TPM-bypass! [ 5.265396] ima: Allocated hash algorithm: sha1 [ 5.275988] usb 3-6: new high-speed USB device number 7 using xhci_hcd [ 5.291983] ima: No architecture policies found [ 5.345981] evm: Initialising EVM extended attributes: [ 5.372216] evm: security.selinux [ 5.397905] evm: security.SMACK64 [ 5.423112] evm: security.SMACK64EXEC [ 5.447836] evm: security.SMACK64TRANSMUTE [ 5.451463] usb 3-6: New USB device found, idVendor=041e, idProduct=322c, bcdDevice= 1.00 [ 5.472974] evm: security.SMACK64MMAP [ 5.472974] evm: security.apparmor [ 5.472974] evm: security.ima [ 5.472974] evm: security.capability [ 5.472975] evm: HMAC attrs: 0x1 [ 5.473409] PM: Magic number: 15:839:565 [ 5.498886] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.549305] rtc_cmos 00:02: setting system clock to 2019-12-18T04:35:10 UTC (1576643710) [ 5.696517] usb 3-6: Product: SB Omni Surround 5.1 [ 5.696518] usb 3-6: Manufacturer: Creative Technology Ltd [ 5.696519] usb 3-6: SerialNumber: ... [ 5.772457] Freeing unused decrypted memory: 2040K [ 5.797202] Freeing unused kernel image memory: 2580K [ 5.821827] Write protecting the kernel read-only data: 22528k [ 5.846996] Freeing unused kernel image memory: 2008K [ 5.856001] usb 3-5.1: new full-speed USB device number 8 using xhci_hcd [ 5.898251] Freeing unused kernel image memory: 1468K [ 5.930102] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.955053] x86/mm: Checking user space page tables [ 5.986691] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.011486] Run /init as init process [ 6.102219] usb 3-5.1: New USB device found, idVendor=06a3, idProduct=0cd7, bcdDevice= 2.15 [ 6.128281] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.154126] usb 3-5.1: Product: Cyborg R.A.T.7 Mouse [ 6.180273] usb 3-5.1: Manufacturer: Saitek [ 6.206884] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 6.233967] usb 3-7: new full-speed USB device number 9 using xhci_hcd [ 6.234566] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 6.287104] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 6.313772] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 6.339559] acpi PNP0C14:02: duplicate WMI GUID HASH_221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 6.374540] usb-storage 3-2.2:1.0: USB Mass Storage device detected [ 6.374613] tg3.c:v3.137 (May 11, 2014) [ 6.401437] scsi host0: usb-storage 3-2.2:1.0 [ 6.454193] ahci 0000:00:1f.2: version 3.0 [ 6.454220] usb-storage 3-2.4:1.0: USB Mass Storage device detected [ 6.454372] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 6.457216] usb 3-7: New USB device found, idVendor=04b4, idProduct=00fa, bcdDevice= 0.00 [ 6.457217] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.457218] usb 3-7: Product: USBSC MFG [ 6.457219] usb 3-7: Manufacturer: Cypress [ 6.480613] scsi host1: usb-storage 3-2.4:1.0 [ 6.506684] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x24 impl SATA mode [ 6.533592] usbcore: registered new interface driver usb-storage [ 6.560338] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 6.692802] usb 3-5.3: new high-speed USB device number 10 using xhci_hcd [ 6.724335] scsi host2: ahci [ 6.771439] scsi host3: ahci [ 6.775691] scsi host4: uas [ 6.797011] scsi host5: ahci [ 6.797404] libphy: tg3 mdio bus: probed [ 6.805776] Broadcom BCM57780 800:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=800:01, irq=POLL) [ 6.806066] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 6.806068] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 6.806069] tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 6.822134] usbcore: registered new interface driver uas [ 6.823660] scsi 4:0:0:0: Direct-Access Seagate BUP Slim RD 0143 PQ: 0 ANSI: 6 [ 6.824941] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 6.842740] sd 4:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 6.843147] sd 4:0:0:0: [sda] Write Protect is off [ 6.843148] sd 4:0:0:0: [sda] Mode Sense: 2b 00 10 08 [ 6.843978] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 6.847054] scsi host6: ahci [ 6.847736] tg3 0000:08:00.0 enp8s0: renamed from eth0 [ 6.927213] usb 3-5.3: New USB device found, idVendor=05e3, idProduct=0607, bcdDevice= 8.01 [ 6.950861] scsi host7: ahci [ 6.977483] usb 3-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 7.003905] scsi host8: ahci [ 7.030905] usb 3-5.3: Product: USB2.0 Hub [ 7.057388] ata1: DUMMY [ 7.084503] usb 3-9: new high-speed USB device number 11 using xhci_hcd [ 7.111110] ata2: DUMMY [ 7.139770] hub 3-5.3:1.0: USB hub found [ 7.165386] ata3: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b200 irq 30 [ 7.193352] hub 3-5.3:1.0: 4 ports detected [ 7.221208] ata4: DUMMY [ 7.221209] ata5: DUMMY [ 7.324803] usb 3-9: New USB device found, idVendor=04f2, idProduct=b469, bcdDevice=28.57 [ 7.339987] ata6: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b380 irq 30 [ 7.362952] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.434290] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 [ 7.451081] usb 3-9: Product: HD WebCam [ 7.456319] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6 [ 7.456474] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 7.456693] sd 0:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.5 GiB) [ 7.457634] sd 0:0:0:0: [sdb] Write Protect is off [ 7.457636] sd 0:0:0:0: [sdb] Mode Sense: 45 00 00 00 [ 7.458573] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.500045] sd 4:0:0:0: [sda] Attached SCSI disk [ 7.509442] usb 3-9: Manufacturer: Chicony Electronics Co.,Ltd. [ 7.533965] usb 3-5.3.1: new low-speed USB device number 12 using xhci_hcd [ 7.622465] usb 3-5.3.1: New USB device found, idVendor=046d, idProduct=c228, bcdDevice= 1.10 [ 7.626260] scsi 1:0:0:0: Direct-Access WD Elements 25A1 1014 PQ: 0 ANSI: 6 [ 7.655288] usb 3-5.3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 7.685172] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 7.685473] sd 1:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [ 7.685713] sd 1:0:0:0: [sdc] 5860466688 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 7.685714] sd 1:0:0:0: [sdc] 4096-byte physical blocks [ 7.686078] sd 1:0:0:0: [sdc] Write Protect is off [ 7.686079] sd 1:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 7.686451] sd 1:0:0:0: [sdc] No Caching mode page found [ 7.686452] sd 1:0:0:0: [sdc] Assuming drive cache: write through [ 7.714485] usb 3-5.3.1: Product: G19 Gaming Keyboard [ 7.767977] usb 3-10: new full-speed USB device number 13 using xhci_hcd [ 7.839548] sdb: sdb1 sdb2 [ 7.850497] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.857217] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9 [ 7.858607] sd 1:0:0:0: [sdc] Attached SCSI disk [ 7.862277] ata3.00: ATAPI: MATSHITADVD-RAM UJ8E2Q, 1.00, max UDMA/133 [ 7.894330] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 7.980199] ata3.00: configured for UDMA/133 [ 7.994809] usb 3-10: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 7.994811] usb 3-10: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 7.994814] usb 3-10: New USB device found, idVendor=0489, idProduct=e092, bcdDevice= 0.01 [ 7.994815] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 8.077981] usb 3-5.3.2: new high-speed USB device number 14 using xhci_hcd [ 8.224622] scsi 5:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E2Q 1.00 PQ: 0 ANSI: 5 [ 8.370025] usb 3-5.3.2: New USB device found, idVendor=046d, idProduct=c229, bcdDevice= 0.23 [ 8.404468] usbcore: registered new interface driver rtsx_usb [ 8.432870] usb 3-5.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8.552719] hidraw: raw HID events driver (C) Jiri Kosina [ 8.582789] usb 3-5.3.2: Product: G19 Gaming Keyboard [ 8.859221] usb 3-5.3.2: Manufacturer: Logitech [ 8.890858] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 8.890859] fb0: switching to inteldrmfb from VESA VGA [ 8.921342] Console: switching to colour dummy device 80x25 [ 8.921371] i915 0000:00:02.0: vgaarb: deactivate vga console [ 8.922025] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.922027] [drm] Driver supports precise vblank timestamp query. [ 8.922384] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.934043] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.934048] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.944609] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 8.945444] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 8.946309] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 8.946325] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20190816/psargs-330) [ 8.946334] No Local Variables are initialized for Method [_BCL] [ 8.946336] No Arguments are initialized for method [_BCL] [ 8.946339] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.DD02._BCL due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 8.947735] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:00/input/input5 [ 8.949517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.949703] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 8.950116] pci_bus 0000:07: Allocating resources [ 8.950172] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 8.950174] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 8.950179] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 8.950189] pci_bus 0000:08: Allocating resources [ 8.950224] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 8.950228] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 8.950231] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 8.950242] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref] [ 8.950249] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref] [ 8.950256] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 8.950260] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff] [ 8.950468] pci_bus 0000:01: Allocating resources [ 8.977557] fbcon: i915drmfb (fb0) is primary device [ 8.982003] usb 3-5.3.3: new full-speed USB device number 15 using xhci_hcd [ 9.069480] usb 3-5.3.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 9.069482] usb 3-5.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.069483] usb 3-5.3.3: Product: USB Receiver [ 9.069484] usb 3-5.3.3: Manufacturer: Logitech [ 9.270522] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.271860] ata6.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133 [ 9.271862] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 9.273486] ata6.00: configured for UDMA/133 [ 9.273996] scsi 8:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5 [ 9.274324] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 9.274377] sd 8:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 9.274410] sd 8:0:0:0: [sdd] Write Protect is off [ 9.274413] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.274450] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.275988] usb 3-5.3.4: new full-speed USB device number 16 using xhci_hcd [ 9.361991] usb 3-5.3.4: New USB device found, idVendor=054c, idProduct=05c4, bcdDevice= 1.00 [ 9.361993] usb 3-5.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.361994] usb 3-5.3.4: Product: Wireless Controller [ 9.361995] usb 3-5.3.4: Manufacturer: Sony Computer Entertainment [ 9.612078] sdd: sdd1 sdd2 sdd3 sdd4 [ 9.612962] sd 8:0:0:0: [sdd] Attached SCSI disk [ 9.995583] Console: switching to colour frame buffer device 240x67 [ 10.015862] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 14.043064] usbcore: registered new interface driver usbhid [ 14.043094] usbhid: USB HID core driver [ 14.045098] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.0/0003:046D:C52B.0001/input/input7 [ 14.098248] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5.3.3/input0 [ 14.098532] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.1/0003:046D:C52B.0002/input/input8 [ 14.098773] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.1/0003:046D:C52B.0002/input/input9 [ 14.152204] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.1/0003:046D:C52B.0002/input/input10 [ 14.152462] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5.3.3/input1 [ 14.152763] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5.3.3/input2 [ 14.152917] input: Creative Technology Ltd SB Omni Surround 5.1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.4/0003:041E:322C.0005/input/input12 [ 14.206235] input: Creative Technology Ltd SB Omni Surround 5.1 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.4/0003:041E:322C.0005/input/input13 [ 14.206441] hid-generic 0003:041E:322C.0005: input,hidraw3: USB HID v1.11 Keyboard [Creative Technology Ltd SB Omni Surround 5.1] on usb-0000:00:14.0-6/input4 [ 14.206643] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.1/3-5.3.1:1.0/0003:046D:C228.0007/input/input14 [ 14.260271] hid-generic 0003:046D:C228.0007: input,hidraw4: USB HID v1.10 Keyboard [G19 Gaming Keyboard] on usb-0000:00:14.0-5.3.1/input0 [ 14.260462] input: G19 Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.1/3-5.3.1:1.1/0003:046D:C228.0008/input/input15 [ 14.314272] hid-generic 0003:046D:C228.0008: input,hiddev2,hidraw5: USB HID v1.10 Device [G19 Gaming Keyboard] on usb-0000:00:14.0-5.3.1/input1 [ 14.314487] input: Logitech G19 Gaming Keyboard Keypad as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.2/3-5.3.2:1.1/0003:046D:C229.0009/input/input17 [ 14.368345] hid-generic 0003:046D:C229.0009: input,hiddev3,hidraw6: USB HID v1.11 Keypad [Logitech G19 Gaming Keyboard] on usb-0000:00:14.0-5.3.2/input1 [ 14.496842] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5.3.3/input2 [ 14.609078] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.2/0003:046D:C52B.0003/0003:046D:404D.000A/input/input19 [ 14.610569] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.2/0003:046D:C52B.0003/0003:046D:404D.000A/input/input20 [ 14.611983] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.2/0003:046D:C52B.0003/0003:046D:404D.000A/input/input21 [ 14.613380] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.2/0003:046D:C52B.0003/0003:046D:404D.000A/input/input22 [ 14.614763] hid-generic 0003:046D:404D.000A: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:14.0-5.3.3/input2:1 [ 14.754989] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.3/3-5.3.3:1.2/0003:046D:C52B.0003/0003:046D:404D.000A/input/input26 [ 14.757075] logitech-hidpp-device 0003:046D:404D.000A: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-5.3.3/input2:1 [ 14.898057] raid6: avx2x4 gen() 32755 MB/s [ 14.931980] raid6: avx2x4 xor() 20590 MB/s [ 14.965962] raid6: avx2x2 gen() 28230 MB/s [ 14.999976] raid6: avx2x2 xor() 18038 MB/s [ 15.033961] raid6: avx2x1 gen() 25138 MB/s [ 15.067959] raid6: avx2x1 xor() 16834 MB/s [ 15.101961] raid6: sse2x4 gen() 18089 MB/s [ 15.135959] raid6: sse2x4 xor() 11195 MB/s [ 15.169962] raid6: sse2x2 gen() 14947 MB/s [ 15.203961] raid6: sse2x2 xor() 9969 MB/s [ 15.237963] raid6: sse2x1 gen() 12820 MB/s [ 15.271960] raid6: sse2x1 xor() 8735 MB/s [ 15.273148] raid6: using algorithm avx2x4 gen() 32755 MB/s [ 15.274333] raid6: .... xor() 20590 MB/s, rmw enabled [ 15.275525] raid6: using avx2x2 recovery algorithm [ 15.277438] xor: automatically using best checksumming function avx [ 15.279427] async_tx: api initialized (async) [ 15.752852] Btrfs loaded, crc32c=crc32c-intel [ 17.736702] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 19.520716] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.534351] systemd[1]: Detected architecture x86-64. [ 19.574582] systemd[1]: Set hostname to ... [ 21.696243] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 21.696462] systemd[1]: Created slice System Slice. [ 21.696577] systemd[1]: Listening on Journal Socket. [ 21.697130] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 21.697589] systemd[1]: Starting Uncomplicated firewall... [ 21.697681] systemd[1]: Listening on udev Control Socket. [ 21.698139] systemd[1]: Starting Set the console keyboard layout... [ 22.042591] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 22.449856] lp: driver loaded but no devices found [ 22.473845] ppdev: user-space parallel port driver [ 22.701615] systemd-journald[547]: Received request to flush runtime journal from PID 1 [ 23.438552] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204) [ 23.438558] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.438567] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204) [ 23.438571] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204) [ 23.438574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.438576] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204) [ 23.438579] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190816/utaddress-204) [ 23.438583] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204) [ 23.438586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.438587] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204) [ 23.438590] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190816/utaddress-204) [ 23.438593] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204) [ 23.438596] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20190816/utaddress-204) [ 23.438599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.438600] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 23.867669] mc: Linux media interface: v0.10 [ 23.938059] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 23.962475] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27 [ 23.962506] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input28 [ 23.962533] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input29 [ 23.962559] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input30 [ 23.962588] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input31 [ 24.037032] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 24.037034] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.037034] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 24.037035] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 24.037036] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 24.037036] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12 [ 24.079842] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input32 [ 24.359419] input: Saitek Cyborg R.A.T.7 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:06A3:0CD7.0006/input/input33 [ 24.359496] saitek 0003:06A3:0CD7.0006: input,hidraw2: USB HID v1.11 Mouse [Saitek Cyborg R.A.T.7 Mouse] on usb-0000:00:14.0-5.1/input0 [ 24.418735] videodev: Linux video capture interface: v2.00 [ 24.558514] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469) [ 24.575451] uvcvideo 3-9:1.0: Entity type for entity Extension 4 was not initialized! [ 24.575452] uvcvideo 3-9:1.0: Entity type for entity Extension 3 was not initialized! [ 24.575453] uvcvideo 3-9:1.0: Entity type for entity Processing 2 was not initialized! [ 24.575454] uvcvideo 3-9:1.0: Entity type for entity Camera 1 was not initialized! [ 24.575506] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input34 [ 24.575561] usbcore: registered new interface driver uvcvideo [ 24.575562] USB Video Class driver (1.1.1) [ 24.661852] input: Sony Computer Entertainment Wireless Controller Touchpad as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.4/3-5.3.4:1.0/0003:054C:05C4.0004/input/input36 [ 24.661941] input: Sony Computer Entertainment Wireless Controller Motion Sensors as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.4/3-5.3.4:1.0/0003:054C:05C4.0004/input/input37 [ 24.676009] acer_wmi: Acer Laptop ACPI-WMI Extras [ 24.676032] acer_wmi: Function bitmap for Communication Button: 0x801 [ 24.707242] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 24.707243] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 24.707244] RAPL PMU: hw unit of domain package 2^-14 Joules [ 24.707244] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 24.707245] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 24.707373] input: Acer WMI hotkeys as /devices/virtual/input/input38 [ 24.716051] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3.4/3-5.3.4:1.0/0003:054C:05C4.0004/input/input35 [ 24.716216] sony 0003:054C:05C4.0004: input,hidraw7: USB HID v81.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:14.0-5.3.4/input0 [ 24.741970] usbcore: registered new interface driver snd-usb-audio [ 24.799908] cryptd: max_cpu_qlen set to 1000 [ 24.883548] Bluetooth: Core ver 2.22 [ 24.883562] NET: Registered protocol family 31 [ 24.883563] Bluetooth: HCI device and connection manager initialized [ 24.883565] Bluetooth: HCI socket layer initialized [ 24.883566] Bluetooth: L2CAP socket layer initialized [ 24.883568] Bluetooth: SCO socket layer initialized [ 25.008527] AVX2 version of gcm_enc/dec engaged. [ 25.008528] AES CTR mode by8 optimization enabled [ 25.294607] EDAC ie31200: No ECC support [ 25.335010] usbcore: registered new interface driver btusb [ 25.652799] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000200.bin [ 25.652801] Bluetooth: hci0: QCA: patch rome 0x200 build 0x299, firmware rome 0x200 build 0x111 [ 25.737100] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000200.bin [ 25.764596] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.765718] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.362951] intel_rapl_common: Found RAPL domain package [ 26.362952] intel_rapl_common: Found RAPL domain core [ 26.362953] intel_rapl_common: Found RAPL domain uncore [ 26.362954] intel_rapl_common: Found RAPL domain dram [ 26.362955] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 26.909232] ath10k_pci 0000:07:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 27.439573] ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff sub 105b:e08e [ 27.439576] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 27.439985] ath10k_pci 0000:07:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32 10bf8e08 [ 27.535686] ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a [ 28.718631] ath10k_pci 0000:07:00.0: unsupported HTC service id: 1536 [ 28.763460] ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 28.837202] ath: EEPROM regdomain: 0x6c [ 28.837203] ath: EEPROM indicates we should expect a direct regpair map [ 28.837204] ath: Country alpha2 being used: 00 [ 28.837205] ath: Regpair used: 0x6c [ 28.838842] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0 [ 35.981998] Adding 4097000k swap on /dev/sda1. Priority:-2 extents:1 across:4097000k FS [ 36.104511] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 37.376150] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null) [ 44.562637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 44.562638] Bluetooth: BNEP filters: protocol multicast [ 44.562641] Bluetooth: BNEP socket layer initialized [ 49.845401] tg3 0000:08:00.0 enp8s0: Link is down [ 51.142447] ath10k_pci 0000:07:00.0: unsupported HTC service id: 1536 [ 51.953813] bpfilter: Loaded bpfilter_umh pid 1415 [ 54.159814] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 54.160970] virbr0: port 1(virbr0-nic) entered blocking state [ 54.160985] virbr0: port 1(virbr0-nic) entered disabled state [ 54.161072] device virbr0-nic entered promiscuous mode [ 54.882682] tg3 0000:08:00.0 enp8s0: Link is up at 1000 Mbps, full duplex [ 54.882684] tg3 0000:08:00.0 enp8s0: Flow control is off for TX and off for RX [ 54.882694] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready [ 54.954952] virbr0: port 1(virbr0-nic) entered blocking state [ 54.954956] virbr0: port 1(virbr0-nic) entered listening state [ 55.747990] virbr0: port 1(virbr0-nic) entered disabled state [ 87.131148] logitech-hidpp-device 0003:046D:404D.000A: HID++ 4.1 device connected. [ 105.092349] rfkill: input handler disabled [ 106.963970] Bluetooth: RFCOMM TTY layer initialized [ 106.963974] Bluetooth: RFCOMM socket layer initialized [ 106.963978] Bluetooth: RFCOMM ver 1.11 [ 125.344204] debugfs: File 'le_min_key_size' in directory 'hci0' already present! [ 125.344207] debugfs: File 'le_max_key_size' in directory 'hci0' already present! [ 244.524915] wingpanel[4784]: segfault at 48 ip 000055731ba7f1b3 sp 00007fff5e0c47f0 error 4 in wingpanel[55731ba74000+13000] [ 244.524921] Code: 48 8b 38 e8 ef bb ff ff 48 8b 43 18 48 8b 78 18 e8 d2 bb ff ff 48 8b 43 18 48 8b 78 18 e8 b5 bb ff ff 48 8b 43 18 48 8b 40 20 <48> 8b 78 48 e8 24 ba ff ff e9 2c ff ff ff 0f 1f 80 00 00 00 00 48 [10451.171758] systemd[1]: systemd-rfkill.socket: Socket unit configuration has changed while unit has been running, no open socket file descriptor left. The socket unit is not functional until restarted. [10451.566142] systemd[1]: systemd-rfkill.socket: Socket unit configuration has changed while unit has been running, no open socket file descriptor left. The socket unit is not functional until restarted. [11796.602948] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79500