[519706.849095] wlo1: RX AssocResp from XXX (capab=0x411 status=30 aid=1) [519706.849115] wlo1: XXX rejected association temporarily; comeback duration 1269 TU (1299 ms) [519708.178405] wlo1: associate with XXX (try 2/3) [519708.180869] wlo1: deauthenticated from XXX while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [519711.295103] wlo1: 80 MHz not supported, disabling VHT [519711.297843] wlo1: authenticate with XXX (local address=XXX) [519711.298832] wlo1: send auth to XXX (try 1/3) [519711.312084] wlo1: authenticated [519711.313423] wlo1: associate with XXX (try 1/3) [519711.433921] wlo1: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [519711.438456] wlo1: associated [519715.172623] wlo1: 80 MHz not supported, disabling VHT [519715.175960] wlo1: authenticate with XXX (local address=XXX) [519715.176967] wlo1: send auth to XXX (try 1/3) [519715.282596] wlo1: send auth to XXX (try 2/3) [519715.389368] wlo1: send auth to XXX (try 3/3) [519715.408493] wlo1: authenticated [519715.409403] wlo1: associate with XXX (try 1/3) [519715.592522] wlo1: associate with XXX (try 2/3) [519715.594951] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 [519715.597292] wlo1: RX AssocResp from XXX (capab=0x411 status=30 aid=1) [519715.597328] wlo1: XXX rejected association temporarily; comeback duration 1269 TU (1299 ms) [519716.898365] wlo1: associate with XXX (try 3/3) [519716.912539] wlo1: association with XXX timed out [519729.307181] wlo1: 80 MHz not supported, disabling VHT [519729.310372] wlo1: authenticate with XXX (local address=XXX) [519729.311340] wlo1: send auth to XXX (try 1/3) [519729.441122] wlo1: send auth to XXX (try 2/3) [519729.543774] wlo1: send auth to XXX (try 3/3) [519729.644845] wlo1: authentication with XXX timed out [520419.957251] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1220081 end=1220082) time 226 us, min 1066, max 1079, scanline start 1064, end 1094 [521694.713418] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=955837 end=955838) time 174 us, min 1783, max 1799, scanline start 1773, end 1802 [521815.442998] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=965705 end=965706) time 206 us, min 1783, max 1799, scanline start 1779, end 1813 [522615.684824] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=1030472 end=1030473) time 181 us, min 1783, max 1799, scanline start 1779, end 1780 [522689.547452] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=1036540 end=1036541) time 208 us, min 1783, max 1799, scanline start 1765, end 1799 [532191.921229] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [532395.430957] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [537059.172896] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [557179.806992] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [557205.050880] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [558514.015098] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [558529.187575] usb 3-6: USB disconnect, device number 22 [558529.436820] usb 3-6: new high-speed USB device number 24 using xhci_hcd [558529.564387] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [558529.564396] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [558529.564399] usb 3-6: Product: ETU905A88-E [558529.564402] usb 3-6: Manufacturer: EGIS [558529.564404] usb 3-6: SerialNumber: ... [560650.257837] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [561712.610870] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [561721.035864] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [575391.982036] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [575595.520824] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [580319.036626] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [584937.561426] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=160955 end=160956) time 247 us, min 1783, max 1799, scanline start 1763, end 1763 [585513.692648] usb 3-3.4.2: USB disconnect, device number 23 [585515.424435] usb 3-3.4.2: new full-speed USB device number 25 using xhci_hcd [585515.529113] usb 3-3.4.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [585515.529126] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [585515.529129] usb 3-3.4.2: Product: USB Receiver [585515.529131] usb 3-3.4.2: Manufacturer: Logitech [585515.543304] logitech-djreceiver 0003:046D:C52B.0012: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4.2/input2 [585515.656326] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.2/0003:046D:C52B.0012/0003:046D:4004.0013/input/input56 [585515.699497] logitech-hidpp-device 0003:046D:4004.0013: input,hidraw5: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-3.4.2/input2:1 [585515.706212] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.2/0003:046D:C52B.0012/0003:046D:400A.0014/input/input57 [585515.706284] logitech-hidpp-device 0003:046D:400A.0014: input,hidraw6: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-3.4.2/input2:2 [585516.484213] logitech-hidpp-device 0003:046D:400A.0014: HID++ 2.0 device connected. [585525.408202] logitech-hidpp-device 0003:046D:4004.0013: HID++ 2.0 device connected. [585601.017342] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [585937.490101] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [586866.021255] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [587576.157518] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=356970 end=356971) time 210 us, min 1783, max 1799, scanline start 1782, end 1782 [588631.262865] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=441199 end=441200) time 147 us, min 1783, max 1799, scanline start 1779, end 1803 [588895.580538] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=464825 end=464826) time 174 us, min 1783, max 1799, scanline start 1772, end 1801 [589630.784335] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=527573 end=527574) time 203 us, min 1783, max 1799, scanline start 1767, end 1768 [589997.486155] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=554107 end=554108) time 252 us, min 1783, max 1799, scanline start 1762, end 1804 [590235.970614] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=570958 end=570959) time 202 us, min 1783, max 1799, scanline start 1767, end 1768 [590822.108650] usb 3-3.4.2: USB disconnect, device number 25 [590833.836899] usb 3-3.3.3: new full-speed USB device number 26 using xhci_hcd [590833.929354] usb 3-3.3.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [590833.929371] usb 3-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [590833.929373] usb 3-3.3.3: Product: USB Receiver [590833.929374] usb 3-3.3.3: Manufacturer: Logitech [590833.943478] logitech-djreceiver 0003:046D:C52B.0017: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.3.3/input2 [590834.056322] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.2/0003:046D:C52B.0017/0003:046D:4004.0018/input/input58 [590834.105980] logitech-hidpp-device 0003:046D:4004.0018: input,hidraw5: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-3.3.3/input2:1 [590834.112201] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.2/0003:046D:C52B.0017/0003:046D:400A.0019/input/input59 [590834.112304] logitech-hidpp-device 0003:046D:400A.0019: input,hidraw6: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-3.3.3/input2:2 [590842.756180] logitech-hidpp-device 0003:046D:400A.0019: HID++ 2.0 device connected. [590983.986226] logitech-hidpp-device 0003:046D:4004.0018: HID++ 2.0 device connected. [591152.713906] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [591157.747878] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [600381.649207] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [600406.645066] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [600560.070289] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [603850.307172] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [604913.642392] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [604922.639518] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [616525.846101] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [618796.591788] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [620085.589805] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [625946.207870] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [629316.102892] nvme nvme0: I/O tag 241 (30f1) opcode 0x1 (I/O Cmd) QID 11 timeout, aborting req_op:WRITE(1) size:12288 [629317.069892] nvme nvme0: I/O tag 909 (c38d) opcode 0x1 (I/O Cmd) QID 13 timeout, aborting req_op:WRITE(1) size:4096 [629317.069933] nvme nvme0: I/O tag 910 (c38e) opcode 0x1 (I/O Cmd) QID 13 timeout, aborting req_op:WRITE(1) size:131072 [629317.069945] nvme nvme0: I/O tag 911 (b38f) opcode 0x1 (I/O Cmd) QID 13 timeout, aborting req_op:WRITE(1) size:24576 [629317.893880] nvme nvme0: I/O tag 599 (b257) opcode 0x2 (I/O Cmd) QID 4 timeout, aborting req_op:READ(0) size:4096 [629346.309806] nvme nvme0: I/O tag 241 (30f1) opcode 0x1 (I/O Cmd) QID 11 timeout, reset controller [629407.277879] nvme0n1: I/O Cmd(0x2) @ LBA 729044056, 104 blocks, I/O Error (sct 0x3 / sc 0x71) [629407.277907] I/O error, dev nvme0n1, sector 729044056 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 [629407.277937] nvme0n1: I/O Cmd(0x2) @ LBA 729044176, 16 blocks, I/O Error (sct 0x3 / sc 0x71) [629407.277945] I/O error, dev nvme0n1, sector 729044176 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 [629407.277962] nvme0n1: I/O Cmd(0x2) @ LBA 729044232, 56 blocks, I/O Error (sct 0x3 / sc 0x71) [629407.277968] I/O error, dev nvme0n1, sector 729044232 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 0 [629407.277979] nvme0n1: I/O Cmd(0x2) @ LBA 729044296, 8 blocks, I/O Error (sct 0x3 / sc 0x71) [629407.277984] I/O error, dev nvme0n1, sector 729044296 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [629407.278051] nvme nvme0: Abort status: 0x371 [629407.278061] nvme nvme0: Abort status: 0x371 [629407.278064] nvme nvme0: Abort status: 0x371 [629407.278067] nvme nvme0: Abort status: 0x371 [629407.278070] nvme nvme0: Abort status: 0x371 [629407.284726] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [629407.284740] nvme 10000:e1:00.0: PCI INT A: no GSI [629407.314348] nvme nvme0: 18/0/0 default/read/poll queues [643618.527438] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [643798.804936] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [644914.005364] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [644929.181218] usb 3-6: USB disconnect, device number 24 [644929.430859] usb 3-6: new high-speed USB device number 27 using xhci_hcd [644929.558957] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [644929.558974] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [644929.558979] usb 3-6: Product: ETU905A88-E [644929.558983] usb 3-6: Manufacturer: EGIS [644929.558986] usb 3-6: SerialNumber: ... [648123.512097] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [648130.515147] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [659726.820155] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [662004.481632] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [663293.478668] usb 3-3.3.1: reset high-speed USB device number 11 using xhci_hcd [666481.302255] usb 3-1: USB disconnect, device number 2 [666481.302269] usb 3-1.6: USB disconnect, device number 4 [666482.018076] r8152 2-3.4.4:1.0 enx00e04c573808: carrier off [666482.396609] usb 3-3.4.1: USB disconnect, device number 12 [666492.800861] usb 3-3: USB disconnect, device number 3 [666492.800884] usb 3-3.2: USB disconnect, device number 7 [666492.801655] usb 3-3.3: USB disconnect, device number 9 [666492.801666] usb 3-3.3.1: USB disconnect, device number 11 [666492.804674] usb 3-3.3.3: USB disconnect, device number 26 [666492.835395] usb 2-3: USB disconnect, device number 2 [666492.835417] usb 2-3.3: USB disconnect, device number 3 [666492.836726] usb 2-3.4: USB disconnect, device number 4 [666492.836737] usb 2-3.4.3: USB disconnect, device number 5 [666492.932964] r8152-cfgselector 2-3.4.4: USB disconnect, device number 6 [666492.933151] r8152 2-3.4.4:1.0 enx00e04c573808: Stop submitting intr, status -108 [666493.118092] usb 3-3.4: USB disconnect, device number 10 [666493.118111] usb 3-3.4.3: USB disconnect, device number 14 [666493.118118] usb 3-XXX.XXX.XXX.XXX: USB disconnect, device number 15 [666494.072406] usb 3-3: new high-speed USB device number 28 using xhci_hcd [666494.085921] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 7 using xhci_hcd [666494.127817] usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 8.b3 [666494.127830] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666494.127834] usb 2-3: Product: USB3.1 Hub [666494.127837] usb 2-3: Manufacturer: VIA Labs, Inc. [666494.130292] hub 2-3:1.0: USB hub found [666494.130606] hub 2-3:1.0: 4 ports detected [666494.246514] usb 3-3: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 8.b3 [666494.246521] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666494.246524] usb 3-3: Product: USB2.0 Hub [666494.246526] usb 3-3: Manufacturer: VIA Labs, Inc. [666494.248004] hub 3-3:1.0: USB hub found [666494.248117] hub 3-3:1.0: 4 ports detected [666494.269888] usb 2-3: USB disconnect, device number 7 [666494.815270] workqueue: pm_runtime_work hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [666494.914303] usb 3-3.3: new high-speed USB device number 29 using xhci_hcd [666495.007155] usb 3-3.3: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.40 [666495.007182] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666495.007186] usb 3-3.3: Product: USB2.0 Hub [666495.007190] usb 3-3.3: Manufacturer: VIA Labs, Inc. [666495.009022] hub 3-3.3:1.0: USB hub found [666495.009316] hub 3-3.3:1.0: 4 ports detected [666495.094338] usb 3-3.4: new high-speed USB device number 30 using xhci_hcd [666495.192782] usb 3-3.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63 [666495.192806] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666495.192812] usb 3-3.4: Product: USB2.1 Hub [666495.192817] usb 3-3.4: Manufacturer: GenesysLogic [666495.194634] hub 3-3.4:1.0: USB hub found [666495.195114] hub 3-3.4:1.0: 4 ports detected [666495.305292] usb 3-3.3.1: new high-speed USB device number 31 using xhci_hcd [666495.419433] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 8 using xhci_hcd [666495.462107] usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 8.b3 [666495.462127] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666495.462131] usb 2-3: Product: USB3.1 Hub [666495.462133] usb 2-3: Manufacturer: VIA Labs, Inc. [666495.467768] hub 2-3:1.0: USB hub found [666495.468072] hub 2-3:1.0: 4 ports detected [666495.495304] usb 3-3.4.3: new high-speed USB device number 32 using xhci_hcd [666495.598798] usb 3-3.4.3: New USB device found, idVendor=1a86, idProduct=8095, bcdDevice= 2.10 [666495.598821] usb 3-3.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [666495.598828] usb 3-3.4.3: Product: USB Hub [666495.600512] hub 3-3.4.3:1.0: USB hub found [666495.600802] hub 3-3.4.3:1.0: 4 ports detected [666495.613892] usb 3-3.3.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10 [666495.613914] usb 3-3.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [666495.613921] usb 3-3.3.1: SerialNumber: ... [666495.618970] usb 3-3.3.1: Found UVC 1.00 device <unnamed> (046d:0825) [666495.890345] usb 3-XXX.XXX.XXX.XXX: new full-speed USB device number 33 using xhci_hcd [666495.979073] usb 3-XXX.XXX.XXX.XXX: not running at top speed; connect to a high speed hub [666495.981952] usb 3-XXX.XXX.XXX.XXX: New USB device found, idVendor=001f, idProduct=0b21, bcdDevice= 1.00 [666495.981962] usb 3-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666495.981967] usb 3-XXX.XXX.XXX.XXX: Product: CS201 [666495.981971] usb 3-XXX.XXX.XXX.XXX: Manufacturer: Generic [666495.981975] usb 3-XXX.XXX.XXX.XXX: SerialNumber: ... [666496.093408] usb 2-3.3: new SuperSpeed USB device number 9 using xhci_hcd [666496.338609] usb 2-3.3: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.41 [666496.338622] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666496.338625] usb 2-3.3: Product: USB3.0 Hub [666496.338628] usb 2-3.3: Manufacturer: VIA Labs, Inc. [666496.339957] hub 2-3.3:1.0: USB hub found [666496.340403] hub 2-3.3:1.0: 4 ports detected [666496.409530] usb 2-3.4: new SuperSpeed USB device number 10 using xhci_hcd [666496.429789] usb 2-3.4: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63 [666496.429800] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666496.429803] usb 2-3.4: Product: USB3.1 Hub [666496.429807] usb 2-3.4: Manufacturer: GenesysLogic [666496.432146] hub 2-3.4:1.0: USB hub found [666496.432963] hub 2-3.4:1.0: 4 ports detected [666496.709459] usb 2-3.4.3: new SuperSpeed USB device number 11 using xhci_hcd [666496.724017] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [666496.724025] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666496.724029] usb 2-3.4.3: Product: Mass Storage Device [666496.724032] usb 2-3.4.3: Manufacturer: Generic [666496.724035] usb 2-3.4.3: SerialNumber: ... [666496.724977] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [666496.725905] scsi host0: usb-storage 2-3.4.3:1.0 [666496.793437] usb 2-3.4.4: new SuperSpeed USB device number 12 using xhci_hcd [666496.805937] usb 2-3.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.fd [666496.805946] usb 2-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666496.805949] usb 2-3.4.4: Product: USB 10/100/1000 LAN [666496.805952] usb 2-3.4.4: Manufacturer: Realtek [666496.805955] usb 2-3.4.4: SerialNumber: ... [666496.872694] r8152-cfgselector 2-3.4.4: reset SuperSpeed USB device number 12 using xhci_hcd [666496.903850] r8152 2-3.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully [666496.930285] usb 3-3.3.1: set resolution quirk: cval->res = 384 [666496.931711] r8152 2-3.4.4:1.0 eth0: v1.12.13 [666496.940066] usb 3-XXX.XXX.XXX.XXX: Warning! Unlikely big volume range (=11520), cval->res is probably wrong. [666496.940074] usb 3-XXX.XXX.XXX.XXX: [2] FU [PCM Playback Volume] ch = 2, val = -11520/0/1 [666496.942401] usb 3-XXX.XXX.XXX.XXX: Warning! Unlikely big volume range (=8191), cval->res is probably wrong. [666496.942404] usb 3-XXX.XXX.XXX.XXX: [5] FU [Mic Capture Volume] ch = 1, val = 0/8191/1 [666496.944243] input: Generic CS201 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.3/3-XXX.XXX.XXX.XXX/3-XXX.XXX.XXX.XXX:XXX.3/0003:001F:0B21.001A/input/input60 [666496.996898] hid-generic 0003:001F:0B21.001A: input,hidraw2: USB HID v2.01 Device [Generic CS201] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input3 [666497.010338] usb 3-3.3.3: new full-speed USB device number 34 using xhci_hcd [666497.104124] usb 3-3.3.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [666497.104148] usb 3-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666497.104155] usb 3-3.3.3: Product: USB Receiver [666497.104160] usb 3-3.3.3: Manufacturer: Logitech [666497.122323] logitech-djreceiver 0003:046D:C52B.001D: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.3.3/input2 [666497.236839] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.2/0003:046D:C52B.001D/0003:046D:4004.001E/input/input61 [666497.292684] logitech-hidpp-device 0003:046D:4004.001E: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-3.3.3/input2:1 [666497.298526] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.2/0003:046D:C52B.001D/0003:046D:400A.001F/input/input62 [666497.300591] logitech-hidpp-device 0003:046D:400A.001F: input,hidraw5: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-3.3.3/input2:2 [666497.373527] r8152 2-3.4.4:1.0 enx00e04c573808: renamed from eth0 [666497.765363] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [666497.766086] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [666497.766776] sd 0:0:0:0: Attached scsi generic sg0 type 0 [666497.767132] sd 0:0:0:1: Attached scsi generic sg1 type 0 [666498.200296] usb 3-3.2: new full-speed USB device number 35 using xhci_hcd [666498.292519] usb 3-3.2: not running at top speed; connect to a high speed hub [666498.296475] usb 3-3.2: New USB device found, idVendor=2109, idProduct=0103, bcdDevice= 1.de [666498.296485] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666498.296490] usb 3-3.2: Product: USB 2.0 BILLBOARD [666498.296494] usb 3-3.2: Manufacturer: VLI Inc. [666498.296498] usb 3-3.2: SerialNumber: ... [666500.288623] sd 0:0:0:0: [sda] Media removed, stopped polling [666500.289208] sd 0:0:0:1: [sdb] Media removed, stopped polling [666500.289488] sd 0:0:0:0: [sda] Attached SCSI removable disk [666500.290269] sd 0:0:0:1: [sdb] Attached SCSI removable disk [666745.250635] usb 3-3.4.1: new full-speed USB device number 36 using xhci_hcd [666745.356558] usb 3-3.4.1: New USB device found, idVendor=0b0e, idProduct=1113, bcdDevice= 4.02 [666745.356573] usb 3-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666745.356577] usb 3-3.4.1: Product: Jabra Engage 75 [666745.356580] usb 3-3.4.1: Manufacturer: GN Audio A/S [666745.356583] usb 3-3.4.1: SerialNumber: ... [666745.510064] input: GN Audio A/S Jabra Engage 75 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.3/0003:0B0E:1113.0020/input/input63 [666745.562112] jabra 0003:0B0E:1113.0020: input,hiddev1,hidraw6: USB HID v1.11 Device [GN Audio A/S Jabra Engage 75] on usb-0000:00:14.0-3.4.1/input3 [666745.812661] usb 3-1: new high-speed USB device number 37 using xhci_hcd [666745.926452] usb 2-1: new SuperSpeed USB device number 13 using xhci_hcd [666745.958121] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.22 [666745.958128] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666745.958130] usb 2-1: Product: USB3.2 Hub [666745.958132] usb 2-1: Manufacturer: Generic [666745.964343] hub 2-1:1.0: USB hub found [666745.965226] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.22 [666745.965232] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666745.965235] usb 3-1: Product: USB2.1 Hub [666745.965236] usb 3-1: Manufacturer: Generic [666745.966568] hub 2-1:1.0: 3 ports detected [666745.968444] hub 3-1:1.0: USB hub found [666745.970242] hub 3-1:1.0: 6 ports detected [666746.153117] usb 2-1: USB disconnect, device number 13 [666746.153216] usb 3-1: USB disconnect, device number 37 [666747.207022] r8152 2-3.4.4:1.0 enx00e04c573808: carrier on [666753.337600] usb 3-1: new high-speed USB device number 39 using xhci_hcd [666753.474253] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.22 [666753.474271] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666753.474278] usb 3-1: Product: USB2.1 Hub [666753.474282] usb 3-1: Manufacturer: Generic [666753.477362] hub 3-1:1.0: USB hub found [666753.478503] hub 3-1:1.0: 6 ports detected [666753.761732] i915 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [666753.768524] usb 3-1.6: new high-speed USB device number 40 using xhci_hcd [666753.864921] usb 3-1.6: New USB device found, idVendor=0bda, idProduct=1100, bcdDevice= 1.01 [666753.864942] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [666753.864950] usb 3-1.6: Product: HID Device [666753.864955] usb 3-1.6: Manufacturer: Realtek [666753.869989] hid-generic 0003:0BDA:1100.0021: hiddev2,hidraw7: USB HID v1.11 Device [Realtek HID Device] on usb-0000:00:14.0-1.6/input0 [666762.409452] workqueue: delayed_fput hogged CPU for >10000us 128 times, consider switching to WQ_UNBOUND [667256.348105] workqueue: delayed_fput hogged CPU for >10000us 256 times, consider switching to WQ_UNBOUND [667828.359333] workqueue: delayed_fput hogged CPU for >10000us 512 times, consider switching to WQ_UNBOUND [669082.340991] workqueue: delayed_fput hogged CPU for >10000us 1024 times, consider switching to WQ_UNBOUND [669146.617344] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [671437.340800] workqueue: delayed_fput hogged CPU for >10000us 2048 times, consider switching to WQ_UNBOUND [676592.334350] workqueue: delayed_fput hogged CPU for >10000us 4096 times, consider switching to WQ_UNBOUND [677660.368097] logitech-hidpp-device 0003:046D:400A.001F: HID++ 2.0 device connected. [677664.740081] logitech-hidpp-device 0003:046D:4004.001E: HID++ 2.0 device connected. [677814.335082] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [677820.708228] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [677859.652903] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [678431.064262] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=68945 end=68946) time 199 us, min 1783, max 1799, scanline start 1779, end 1812 [678444.597376] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=70163 end=70164) time 209 us, min 1783, max 1799, scanline start 1776, end 1811 [678637.640667] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [678715.182242] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=94516 end=94517) time 218 us, min 1783, max 1799, scanline start 1781, end 1817 [679013.237769] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [683272.788282] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=503535 end=503536) time 177 us, min 1783, max 1799, scanline start 1779, end 1808 [683932.423212] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=376223 end=376224) time 148 us, min 1073, max 1079, scanline start 1072, end 1081 [684908.694388] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=869731 end=869732) time 118 us, min 1066, max 1079, scanline start 1065, end 1080 [686825.757431] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [687058.688651] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [690499.055034] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe C (start=770219 end=770220) time 117 us, min 1073, max 1079, scanline start 1072, end 1080 [691329.718803] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [691955.535858] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [691960.917635] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [691977.072612] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [702926.905536] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [705207.734032] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [706503.726183] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [712346.754636] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [730025.812547] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [730318.587698] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [731313.031386] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [731327.731317] usb 3-6: USB disconnect, device number 27 [731327.981786] usb 3-6: new high-speed USB device number 41 using xhci_hcd [731328.110206] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [731328.110220] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [731328.110224] usb 3-6: Product: ETU905A88-E [731328.110228] usb 3-6: Manufacturer: EGIS [731328.110231] usb 3-6: SerialNumber: ... [734530.293880] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [734533.409203] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [746127.029513] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [748407.823601] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [749703.865320] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [755546.907443] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [759652.521925] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [759879.482328] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [762524.852235] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [762530.259158] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [762547.112150] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [762904.342361] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [763993.680009] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [764007.927952] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [764126.523697] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [765666.232088] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [777733.481272] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [791607.963851] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [792904.014719] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [802860.123945] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [803081.127686] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [806104.496739] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [808868.111059] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [816914.151673] loop1: detected capacity change from 0 to 136816 [817713.365803] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [817728.581275] usb 3-6: USB disconnect, device number 41 [817728.831549] usb 3-6: new high-speed USB device number 42 using xhci_hcd [817728.958972] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [817728.958985] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [817728.958989] usb 3-6: Product: ETU905A88-E [817728.958993] usb 3-6: Manufacturer: EGIS [817728.958995] usb 3-6: SerialNumber: ... [820933.740079] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [834808.118432] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [836104.137081] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [846120.024107] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [846289.021674] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [849168.071298] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [849304.693802] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [851552.743866] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [851883.000752] bamfdaemon[6869]: segfault at 30 ip 00007a1f69cf661a sp 00007ffd2cc457d0 error 4 in libgobject-2.0.so.0.8000.0[7a1f69ce1000+37000] likely on CPU 11 (core 20, socket 0) [851883.000768] Code: 31 d2 4c 89 e7 e8 36 b3 fe ff 48 89 df e8 3e fc 00 00 8b 35 f0 da 03 00 31 c9 31 d2 4c 89 e7 e8 1c b3 fe ff 48 8b 03 48 89 df <ff> 50 30 48 89 df e8 db 57 01 00 e9 7e fe ff ff 66 0f 1f 44 00 00 [852069.492884] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [852276.943184] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [853207.448331] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=216286 end=216287) time 164 us, min 1783, max 1799, scanline start 1780, end 1808 [855401.692557] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=413768 end=413769) time 175 us, min 1783, max 1799, scanline start 1777, end 1806 [860875.847766] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [860909.743685] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [860918.020832] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [860931.994564] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861214.736910] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861235.951829] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861241.401037] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861269.230720] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861362.926466] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861570.432667] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861573.697601] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861588.555583] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861656.508384] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861687.518264] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861727.468135] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861748.671038] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861755.374002] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [861768.492084] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862227.512454] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862232.770416] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862236.585446] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862257.413437] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862277.945331] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862582.365481] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862610.487371] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862618.852442] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862627.690251] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862648.138186] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [862677.436308] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [863187.661705] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [863356.804187] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [863478.429636] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [864133.962969] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [864357.766024] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [865280.794945] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [873979.621900] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [879304.264126] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [889379.896392] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [889495.250170] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [892504.782565] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [895270.877364] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [901340.873574] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [904113.068281] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [904128.281476] usb 3-6: USB disconnect, device number 42 [904128.530966] usb 3-6: new high-speed USB device number 43 using xhci_hcd [904128.658558] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [904128.658578] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [904128.658583] usb 3-6: Product: ETU905A88-E [904128.658587] usb 3-6: Manufacturer: EGIS [904128.658590] usb 3-6: SerialNumber: ... [907334.161537] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [917179.724120] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [918955.759601] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [922504.369188] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [925149.177920] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=39196 end=39197) time 182 us, min 1783, max 1799, scanline start 1775, end 1805 [926266.604370] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [930289.325032] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [932489.332532] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [932494.661536] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [932531.027670] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [932567.638327] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [932651.759142] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [935705.055392] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [936784.984133] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [939583.945080] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [944578.056125] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [950534.324347] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [952146.412034] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [952152.178135] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [953687.342806] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=212081 end=212082) time 221 us, min 1783, max 1799, scanline start 1775, end 1812 [955386.584178] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=364527 end=364528) time 196 us, min 1783, max 1799, scanline start 1773, end 1806 [960379.835231] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [962156.574609] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [973490.494413] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [978905.193335] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [982784.167195] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [987837.880076] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [990512.770641] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [990527.982077] usb 3-6: USB disconnect, device number 43 [990528.233296] usb 3-6: new high-speed USB device number 44 using xhci_hcd [990528.361392] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [990528.361404] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [990528.361407] usb 3-6: Product: ETU905A88-E [990528.361410] usb 3-6: Manufacturer: EGIS [990528.361412] usb 3-6: SerialNumber: ... [993734.432607] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1003580.004125] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1005356.692365] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014015.363380] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014278.571604] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014293.329735] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014297.985589] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014313.654525] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014424.182384] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1014489.266063] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1015158.516246] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1015309.609673] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=116548 end=116549) time 256 us, min 1783, max 1799, scanline start 1769, end 1813 [1016690.682096] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1019793.961822] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1019799.382943] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1019881.889753] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1020639.302051] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1020676.560057] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1021432.010309] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=950381 end=950382) time 188 us, min 1066, max 1079, scanline start 1065, end 1090 [1021601.766112] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1022105.377756] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1025367.791779] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1025469.923551] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1025509.273332] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1025585.441131] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1025984.281203] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1031097.739492] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1035098.682956] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1036840.014628] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1036934.500606] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1046780.124532] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1048558.428678] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1051910.424856] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1055338.420111] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1059890.818314] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1065305.538556] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1068973.390674] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1069184.436409] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1076912.467581] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1076927.682676] usb 3-6: USB disconnect, device number 44 [1076927.933109] usb 3-6: new high-speed USB device number 45 using xhci_hcd [1076928.060558] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1076928.060567] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1076928.060569] usb 3-6: Product: ETU905A88-E [1076928.060572] usb 3-6: Manufacturer: EGIS [1076928.060573] usb 3-6: SerialNumber: ... [1077260.410578] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1080134.580290] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1089980.330429] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1095117.584854] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1103155.029303] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1104992.425843] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=512281 end=512282) time 175 us, min 1066, max 1079, scanline start 1062, end 1085 [1107309.089901] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1108505.665797] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1108868.745523] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1108898.979450] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1109688.210731] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1109885.712040] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1109893.465006] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1110068.628780] asus_wmi: Unknown key code 0xe5 [1110928.128537] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1112174.142917] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1112384.568533] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1120248.724558] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1120460.718958] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1120742.955132] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1123304.712967] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1123317.522939] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1123336.379877] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1133180.518121] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1138320.184588] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1146357.149581] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1148418.230923] tailscale0 (unregistering): left promiscuous mode [1151705.870150] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1155374.252659] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1155584.743074] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1163312.243279] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1163327.461383] usb 3-6: USB disconnect, device number 45 [1163327.711983] usb 3-6: new high-speed USB device number 46 using xhci_hcd [1163327.839555] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1163327.839569] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1163327.839573] usb 3-6: Product: ETU905A88-E [1163327.839576] usb 3-6: Manufacturer: EGIS [1163327.839579] usb 3-6: SerialNumber: ... [1163662.102622] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1166505.061947] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1166517.699127] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1166536.560153] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1176380.827728] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1181579.069812] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1185774.617228] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189386.018063] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189558.541639] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189694.986121] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189711.312093] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189853.329704] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189910.657471] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189943.702362] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189963.527367] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189970.406379] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189980.520291] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1189988.540282] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1190167.562741] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1190171.405740] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1190208.610562] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1190212.374777] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1191158.584744] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1191171.101749] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1191336.378972] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1191884.429019] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192000.811558] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192065.797362] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192120.410470] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192132.071222] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192136.082138] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192149.007160] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1192158.942126] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1194637.419218] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1194906.150256] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1198575.995687] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1198785.032987] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1200421.358972] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1202470.618268] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1205516.981542] Bluetooth: hci0: Invalid LTK for XXX [1205517.019414] Bluetooth: hci0: No such LE device XXX (0x0) [1205519.227139] br-14cef9957361: port 1(veth513ff93) entered disabled state [1205519.228461] veth2c96a21: renamed from eth0 [1205519.284106] br-14cef9957361: port 1(veth513ff93) entered disabled state [1205519.284845] veth513ff93 (unregistering): left allmulticast mode [1205519.284848] veth513ff93 (unregistering): left promiscuous mode [1205519.284851] br-14cef9957361: port 1(veth513ff93) entered disabled state [1205520.426397] br-14cef9957361: port 1(veth6fcbb2b) entered blocking state [1205520.426402] br-14cef9957361: port 1(veth6fcbb2b) entered disabled state [1205520.426413] veth6fcbb2b: entered allmulticast mode [1205520.426453] veth6fcbb2b: entered promiscuous mode [1205520.446212] eth0: renamed from vetha66118d [1205520.454124] br-14cef9957361: port 1(veth6fcbb2b) entered blocking state [1205520.454132] br-14cef9957361: port 1(veth6fcbb2b) entered forwarding state [1205560.498454] PM: Image not found (code -16) [1206313.999117] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1206863.584315] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1208951.922850] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1209705.307197] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1209717.921156] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1209736.770044] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1210574.300167] usb 3-3.4-port1: disabled by hub (EMI?), re-enabling... [1210574.300362] usb 3-3.4.1: USB disconnect, device number 36 [1210574.561486] usb 3-3.4.1: new full-speed USB device number 47 using xhci_hcd [1210574.668477] usb 3-3.4.1: New USB device found, idVendor=0b0e, idProduct=1113, bcdDevice= 4.02 [1210574.668494] usb 3-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1210574.668499] usb 3-3.4.1: Product: Jabra Engage 75 [1210574.668503] usb 3-3.4.1: Manufacturer: GN Audio A/S [1210574.668506] usb 3-3.4.1: SerialNumber: ... [1210574.775694] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1210574.833992] input: GN Audio A/S Jabra Engage 75 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.3/0003:0B0E:1113.0022/input/input64 [1210574.886104] jabra 0003:0B0E:1113.0022: input,hiddev1,hidraw6: USB HID v1.11 Device [GN Audio A/S Jabra Engage 75] on usb-0000:00:14.0-3.4.1/input3 [1210625.434246] usb 3-3.1: new full-speed USB device number 48 using xhci_hcd [1210625.522748] usb 3-3.1: not running at top speed; connect to a high speed hub [1210625.523791] usb 3-3.1: New USB device found, idVendor=1782, idProduct=4d00, bcdDevice=24.30 [1210625.523798] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1210625.523802] usb 3-3.1: Product: Gadget Serial [1210625.523806] usb 3-3.1: Manufacturer: spreadtrum with dwc3-gadget [1210629.084280] usb 3-3.1: USB disconnect, device number 48 [1210694.549007] usb 3-3.1: new high-speed USB device number 49 using xhci_hcd [1210694.640264] usb 3-3.1: New USB device found, idVendor=1782, idProduct=4038, bcdDevice= 4.04 [1210694.640282] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1210694.640290] usb 3-3.1: Product: Unisoc Phone [1210694.640295] usb 3-3.1: Manufacturer: Unisoc Phone [1210694.640299] usb 3-3.1: SerialNumber: ... [1210694.759293] rndis_host 3-3.1:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-3.1, RNDIS device, XXX [1210694.759418] usbcore: registered new interface driver rndis_host [1210694.785844] rndis_host 3-3.1:1.0 enx3af897fae4da: renamed from eth0 [1210742.187701] wlo1: authenticate with XXX (local address=XXX) [1210742.188537] wlo1: send auth to XXX (try 1/3) [1210742.221373] wlo1: authenticated [1210742.223933] wlo1: associate with XXX (try 1/3) [1210742.226119] wlo1: RX AssocResp from XXX (capab=0x8111 status=0 aid=6) [1210742.234942] wlo1: associated [1210941.404968] usb 3-3.1: USB disconnect, device number 49 [1210941.405282] rndis_host 3-3.1:1.0 enx3af897fae4da: unregister 'rndis_host' usb-0000:00:14.0-3.1, RNDIS device [1210949.546053] wlo1: authenticate with XXX (local address=XXX) [1210949.546965] wlo1: send auth to XXX (try 1/3) [1210949.681440] wlo1: send auth to XXX (try 2/3) [1210949.782240] wlo1: send auth to XXX (try 3/3) [1210949.883478] wlo1: authentication with XXX timed out [1218549.288121] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1219581.436510] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1223783.671477] retire_capture_urb: 83 callbacks suppressed [1232758.685744] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1236270.389807] workqueue: mmput_async_fn hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [1238106.324712] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1241451.418547] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1245717.172149] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1249514.664202] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1249711.607647] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1249726.816604] usb 3-6: USB disconnect, device number 46 [1249727.067354] usb 3-6: new high-speed USB device number 50 using xhci_hcd [1249727.194859] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1249727.194872] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1249727.194876] usb 3-6: Product: ETU905A88-E [1249727.194879] usb 3-6: Manufacturer: EGIS [1249727.194882] usb 3-6: SerialNumber: ... [1252152.681951] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1252905.493925] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1252918.006893] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1252936.978850] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1261749.492395] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1262781.674588] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1281306.429443] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1282927.317825] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1283591.280971] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1284216.725025] usb 3-3.1: new full-speed USB device number 51 using xhci_hcd [1284216.816073] usb 3-3.1: New USB device found, idVendor=16f0, idProduct=0004, bcdDevice= 1.00 [1284216.816087] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1284216.816092] usb 3-3.1: Product: Accessory Interface [1284216.816095] usb 3-3.1: Manufacturer: GN Hearing [1284216.816098] usb 3-3.1: SerialNumber: ... [1284255.964264] usb 3-3.1: USB disconnect, device number 51 [1284652.226052] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1288977.051035] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1292714.857798] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1295352.789728] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1296105.621902] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1296118.182681] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1296137.129613] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1304949.693414] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1305981.891277] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1319266.089168] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=92311 end=92312) time 166 us, min 1066, max 1079, scanline start 1061, end 1082 [1321690.272310] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1322331.653748] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=460181 end=460182) time 177 us, min 1066, max 1079, scanline start 1061, end 1084 [1324506.608358] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1327852.371905] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1332236.921550] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1335915.047143] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1336111.759599] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1336126.963609] usb 3-6: USB disconnect, device number 50 [1336127.217284] usb 3-6: new high-speed USB device number 52 using xhci_hcd [1336127.344819] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1336127.344845] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1336127.344850] usb 3-6: Product: ETU905A88-E [1336127.344854] usb 3-6: Manufacturer: EGIS [1336127.344858] usb 3-6: SerialNumber: ... [1338552.953793] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1339305.859750] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1339318.271758] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1339337.348874] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1348149.851688] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1349182.481910] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1355099.449959] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1364936.876815] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1365374.797559] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1365633.489653] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1366144.561629] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=134780 end=134781) time 151 us, min 1066, max 1079, scanline start 1062, end 1081 [1367706.975879] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1368690.234909] workqueue: drain_vmap_area_work hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [1368756.308035] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1368922.078565] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1369032.375283] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1369172.173806] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1371052.657879] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1371123.161369] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1371213.985994] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1371673.215590] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1371935.159480] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1379115.266783] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1382506.044799] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1382518.403765] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1382537.525624] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1392383.032034] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1392692.680029] systemd-journald[475]: Under memory pressure, flushing caches. [1392706.120055] systemd-journald[475]: Under memory pressure, flushing caches. [1392710.573712] systemd-journald[475]: Under memory pressure, flushing caches. [1392715.261952] systemd-journald[475]: Under memory pressure, flushing caches. [1392718.115776] systemd-journald[475]: Under memory pressure, flushing caches. [1406236.189314] compiz[18117]: segfault at 0 ip 00007075eb9f3645 sp 00007ffc7e5ea660 error 4 in libunityshell.so[7075eb7f1000+345000] likely on CPU 6 (core 12, socket 0) [1406236.189332] Code: 45 88 48 85 c0 74 13 48 8b 78 68 e8 35 c1 e0 ff 48 8b 7d 88 48 8b 07 ff 50 10 49 8b bc 24 30 07 00 00 48 8d 55 90 31 c9 31 f6 <48> 8b 07 ff 50 58 85 c0 89 c3 48 8b 05 fa bf 24 00 4c 8b 75 b8 4c [1406244.877184] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1406345.179917] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1406345.696468] compiz[1913249]: segfault at 0 ip 000072d173bf3645 sp 00007fff68e62ce0 error 4 in libunityshell.so[72d1739f1000+345000] likely on CPU 8 (core 16, socket 0) [1406345.696482] Code: 45 88 48 85 c0 74 13 48 8b 78 68 e8 35 c1 e0 ff 48 8b 7d 88 48 8b 07 ff 50 10 49 8b bc 24 30 07 00 00 48 8d 55 90 31 c9 31 f6 <48> 8b 07 ff 50 58 85 c0 89 c3 48 8b 05 fa bf 24 00 4c 8b 75 b8 4c [1414413.933356] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1422315.351152] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1422511.793456] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1422527.023439] usb 3-6: USB disconnect, device number 52 [1422527.273165] usb 3-6: new high-speed USB device number 53 using xhci_hcd [1422527.400678] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1422527.400694] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1422527.400699] usb 3-6: Product: ETU905A88-E [1422527.400703] usb 3-6: Manufacturer: EGIS [1422527.400706] usb 3-6: SerialNumber: ... [1425707.340938] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1425718.583098] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1425737.693810] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1435583.134530] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1449545.478223] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1452996.267103] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1453007.603917] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1453082.232996] compiz[1914048]: segfault at 0 ip 000073ffa7bf3645 sp 00007ffd774b8240 error 4 in libunityshell.so[73ffa79f1000+345000] likely on CPU 4 (core 8, socket 0) [1453082.233039] Code: 45 88 48 85 c0 74 13 48 8b 78 68 e8 35 c1 e0 ff 48 8b 7d 88 48 8b 07 ff 50 10 49 8b bc 24 30 07 00 00 48 8d 55 90 31 c9 31 f6 <48> 8b 07 ff 50 58 85 c0 89 c3 48 8b 05 fa bf 24 00 4c 8b 75 b8 4c [1453303.805907] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=47956 end=47957) time 202 us, min 1783, max 1799, scanline start 1773, end 1807 [1453906.116028] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1453923.454297] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1455129.901692] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1455198.024601] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=107271 end=107272) time 204 us, min 1066, max 1079, scanline start 1054, end 1081 [1455222.941185] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=110261 end=110262) time 183 us, min 1066, max 1079, scanline start 1065, end 1089 [1456234.168245] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=231609 end=231610) time 183 us, min 1066, max 1079, scanline start 1055, end 1079 [1456732.215222] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=291375 end=291376) time 205 us, min 1066, max 1079, scanline start 1055, end 1082 [1457167.620351] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1458756.133890] workqueue: delayed_fput hogged CPU for >10000us 8192 times, consider switching to WQ_UNBOUND [1459784.246523] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=657621 end=657622) time 146 us, min 1066, max 1079, scanline start 1065, end 1084 [1460807.936095] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1464371.474201] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=147638 end=147639) time 184 us, min 1066, max 1079, scanline start 1058, end 1082 [1464380.574181] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=148730 end=148731) time 180 us, min 1066, max 1079, scanline start 1062, end 1085 [1465142.099292] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1465148.511247] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1465161.545378] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1465169.725321] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1467059.139750] usb 2-3.4.3: USB disconnect, device number 11 [1467202.256818] usb 2-3.4.3: new SuperSpeed USB device number 14 using xhci_hcd [1467202.270434] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1467202.270444] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1467202.270448] usb 2-3.4.3: Product: Mass Storage Device [1467202.270450] usb 2-3.4.3: Manufacturer: Generic [1467202.270452] usb 2-3.4.3: SerialNumber: ... [1467202.271483] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1467202.271828] scsi host0: usb-storage 2-3.4.3:1.0 [1467203.298237] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1467203.299080] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1467203.299573] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1467203.299934] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1467203.300142] sd 0:0:0:0: [sda] Media removed, stopped polling [1467203.300829] sd 0:0:0:0: [sda] Attached SCSI removable disk [1467204.008214] sd 0:0:0:1: [sdb] Media removed, stopped polling [1467204.008942] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1467406.555634] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=511850 end=511851) time 213 us, min 1066, max 1079, scanline start 1058, end 1086 [1467406.572254] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=511852 end=511853) time 232 us, min 1066, max 1079, scanline start 1049, end 1079 [1467426.955470] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=514298 end=514299) time 194 us, min 1066, max 1079, scanline start 1057, end 1082 [1467428.672160] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=514504 end=514505) time 187 us, min 1066, max 1079, scanline start 1061, end 1085 [1468071.955833] usb 2-3.4.3: USB disconnect, device number 14 [1468072.944623] usb 2-3.4.3: new SuperSpeed USB device number 15 using xhci_hcd [1468072.958005] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1468072.958019] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1468072.958023] usb 2-3.4.3: Product: Mass Storage Device [1468072.958026] usb 2-3.4.3: Manufacturer: Generic [1468072.958029] usb 2-3.4.3: SerialNumber: ... [1468072.958961] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1468072.959460] scsi host0: usb-storage 2-3.4.3:1.0 [1468074.016900] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1468074.017800] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1468074.018281] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1468074.018827] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1468074.018830] sd 0:0:0:0: [sda] Media removed, stopped polling [1468074.019328] sd 0:0:0:0: [sda] Attached SCSI removable disk [1468074.727000] sd 0:0:0:1: [sdb] Media removed, stopped polling [1468074.727811] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1468097.891858] usb 2-3.4.3: USB disconnect, device number 15 [1468109.999621] usb 2-3.4.3: new SuperSpeed USB device number 16 using xhci_hcd [1468110.013215] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1468110.013219] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1468110.013221] usb 2-3.4.3: Product: Mass Storage Device [1468110.013222] usb 2-3.4.3: Manufacturer: Generic [1468110.013222] usb 2-3.4.3: SerialNumber: ... [1468110.013928] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1468110.014137] scsi host0: usb-storage 2-3.4.3:1.0 [1468111.071553] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1468111.072432] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1468111.072831] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1468111.073096] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1468111.424778] sd 0:0:0:0: [sda] 249645056 512-byte logical blocks: (128 GB/119 GiB) [1468111.425961] sd 0:0:0:0: [sda] Write Protect is off [1468111.425977] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [1468111.427107] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1468111.427583] sd 0:0:0:1: [sdb] Media removed, stopped polling [1468111.428071] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1468111.432015] sda: sda1 [1468111.432170] sd 0:0:0:0: [sda] Attached SCSI removable disk [1468111.443057] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468111.443062] sd 0:0:0:0: [sda] tag#0 Sense Key : Not Ready [current] [1468111.443064] sd 0:0:0:0: [sda] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468111.443066] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 0e e1 47 f0 00 00 08 00 [1468111.443067] I/O error, dev sda, sector 249645040 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [1468111.443778] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468111.443781] sd 0:0:0:0: [sda] tag#0 Sense Key : Not Ready [current] [1468111.443783] sd 0:0:0:0: [sda] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468111.443785] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 0e e1 47 f0 00 00 08 00 [1468111.443786] I/O error, dev sda, sector 249645040 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1468111.443789] Buffer I/O error on dev sda, logical block 31205630, async page read [1468112.442982] sda: sda1 [1468112.719001] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1468150.675089] sda: detected capacity change from 249645056 to 0 [1468152.979568] usb 2-3.4.3: USB disconnect, device number 16 [1468160.352309] usb 2-3.4.3: new SuperSpeed USB device number 17 using xhci_hcd [1468160.365961] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1468160.365970] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1468160.365973] usb 2-3.4.3: Product: Mass Storage Device [1468160.365975] usb 2-3.4.3: Manufacturer: Generic [1468160.365977] usb 2-3.4.3: SerialNumber: ... [1468160.368095] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1468160.368682] scsi host0: usb-storage 2-3.4.3:1.0 [1468161.375669] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1468161.376501] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1468161.376926] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1468161.377398] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1468161.377635] sd 0:0:0:0: [sda] Media removed, stopped polling [1468161.378325] sd 0:0:0:0: [sda] Attached SCSI removable disk [1468161.840811] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1468161.842123] sd 0:0:0:1: [sdb] Write Protect is off [1468161.842138] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1468161.843429] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1468161.854172] sdb: sdb1 sdb2 [1468161.854512] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1468162.308620] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1468162.818211] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1468162.818229] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 10 00 [1468162.818241] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468162.818245] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1468162.818252] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468162.818255] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 10 00 [1468162.818257] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0 [1468162.818271] Buffer I/O error on dev sdb2, logical block 0, lost async page write [1468162.818293] Buffer I/O error on dev sdb2, logical block 1, lost async page write [1468164.080380] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468164.080392] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1468164.080398] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468164.080403] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 50 45 70 00 00 08 00 [1468164.080405] I/O error, dev sdb, sector 5260656 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.080416] Buffer I/O error on dev sdb2, logical block 524462, lost async page write [1468164.481122] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468164.481132] sd 0:0:0:1: [sdb] tag#0 Sense Key : Unit Attention [current] [1468164.481135] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Not ready to ready change, medium may have changed [1468164.481138] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 90 40 80 00 00 08 00 [1468164.481140] I/O error, dev sdb, sector 9453696 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481149] Buffer I/O error on dev sdb2, logical block 1048592, lost async page write [1468164.481203] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481205] I/O error, dev sdb, sector 9463872 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481209] Buffer I/O error on dev sdb2, logical block 1049864, lost async page write [1468164.481215] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481217] I/O error, dev sdb, sector 9464120 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481220] Buffer I/O error on dev sdb2, logical block 1049895, lost async page write [1468164.481248] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481257] I/O error, dev sdb, sector 9482032 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481264] Buffer I/O error on dev sdb2, logical block 1052134, lost async page write [1468164.481281] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481283] I/O error, dev sdb, sector 9530656 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481286] Buffer I/O error on dev sdb2, logical block 1058212, lost async page write [1468164.481302] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481304] I/O error, dev sdb, sector 9530920 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481307] Buffer I/O error on dev sdb2, logical block 1058245, lost async page write [1468164.481313] sd 0:0:0:1: [sdb] tag#0 device offline or changed [1468164.481315] I/O error, dev sdb, sector 9539496 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468164.481317] Buffer I/O error on dev sdb2, logical block 1059317, lost async page write [1468164.511685] JBD2: journal recovery failed [1468164.511698] EXT4-fs (sdb2): error loading journal [1468201.283976] usb 2-3.4.3: USB disconnect, device number 17 [1468203.345297] usb 2-3.4.3: new SuperSpeed USB device number 18 using xhci_hcd [1468203.358951] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1468203.358959] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1468203.358962] usb 2-3.4.3: Product: Mass Storage Device [1468203.358964] usb 2-3.4.3: Manufacturer: Generic [1468203.358966] usb 2-3.4.3: SerialNumber: ... [1468203.359666] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1468203.361372] scsi host0: usb-storage 2-3.4.3:1.0 [1468204.383701] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1468204.384605] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1468204.385382] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1468204.385821] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1468204.385966] sd 0:0:0:0: [sda] Media removed, stopped polling [1468204.386524] sd 0:0:0:0: [sda] Attached SCSI removable disk [1468204.822900] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1468204.824116] sd 0:0:0:1: [sdb] Write Protect is off [1468204.824127] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1468204.825297] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1468204.833618] sdb: sdb1 sdb2 [1468204.834317] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1468205.276742] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1468205.766779] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1468205.766795] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 10 00 [1468205.766806] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468205.766811] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1468205.766817] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468205.766820] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 10 00 [1468205.766823] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0 [1468205.766834] Buffer I/O error on dev sdb2, logical block 0, lost async page write [1468205.766852] Buffer I/O error on dev sdb2, logical block 1, lost async page write [1468205.935176] JBD2: journal recovery failed [1468205.935187] EXT4-fs (sdb2): error loading journal [1468206.309040] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=607821 end=607822) time 218 us, min 1066, max 1079, scanline start 1055, end 1084 [1468239.358600] sdb: sdb1 sdb2 [1468314.387756] usb 2-3.4.3: USB disconnect, device number 18 [1468316.146869] usb 2-3.4.3: new SuperSpeed USB device number 19 using xhci_hcd [1468316.161485] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1468316.161491] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1468316.161492] usb 2-3.4.3: Product: Mass Storage Device [1468316.161493] usb 2-3.4.3: Manufacturer: Generic [1468316.161494] usb 2-3.4.3: SerialNumber: ... [1468316.162179] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1468316.162569] scsi host0: usb-storage 2-3.4.3:1.0 [1468317.215047] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1468317.215994] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1468317.216555] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1468317.217062] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1468317.217145] sd 0:0:0:0: [sda] Media removed, stopped polling [1468317.217899] sd 0:0:0:0: [sda] Attached SCSI removable disk [1468317.664318] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1468317.665499] sd 0:0:0:1: [sdb] Write Protect is off [1468317.665506] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1468317.666720] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1468317.673750] sdb: sdb1 sdb2 [1468317.674363] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1468318.129635] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1468318.213114] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1468318.213131] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1468318.213142] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1468318.213146] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1468318.213152] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1468318.213154] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1468318.213157] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1468318.213168] Buffer I/O error on dev sdb2, logical block 0, lost sync page write [1468318.213193] EXT4-fs (sdb2): I/O error while writing superblock [1468318.213259] EXT4-fs (sdb2): mount failed [1468318.213376] Aborting journal on device sdb2-8. [1469149.099757] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1469557.923985] usb 2-3.4.3: USB disconnect, device number 19 [1469560.351349] usb 2-3.4.3: new SuperSpeed USB device number 20 using xhci_hcd [1469560.365172] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1469560.365189] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1469560.365194] usb 2-3.4.3: Product: Mass Storage Device [1469560.365197] usb 2-3.4.3: Manufacturer: Generic [1469560.365199] usb 2-3.4.3: SerialNumber: ... [1469560.366192] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1469560.366690] scsi host0: usb-storage 2-3.4.3:1.0 [1469561.371862] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1469561.372544] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1469561.372922] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1469561.373176] scsi 0:0:0:1: Attached scsi generic sg1 type 0 [1469561.373510] sd 0:0:0:0: [sda] Media removed, stopped polling [1469561.374189] sd 0:0:0:0: [sda] Attached SCSI removable disk [1469561.808030] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1469561.809186] sd 0:0:0:1: [sdb] Write Protect is off [1469561.809200] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1469561.810692] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1469561.819544] sdb: sdb1 sdb2 [1469561.820273] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1469562.276950] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1469562.397035] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1469562.397050] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469562.397060] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1469562.397065] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1469562.397070] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1469562.397073] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469562.397075] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1469562.397087] Buffer I/O error on dev sdb2, logical block 0, lost sync page write [1469562.397107] EXT4-fs (sdb2): I/O error while writing superblock [1469562.397144] EXT4-fs (sdb2): mount failed [1469562.397438] Aborting journal on device sdb2-8. [1469602.359906] sdb: detected capacity change from 30703616 to 0 [1469605.731979] usb 2-3.4.3: USB disconnect, device number 20 [1469609.281210] usb 2-3.4.3: new SuperSpeed USB device number 21 using xhci_hcd [1469609.294849] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1469609.294854] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1469609.294856] usb 2-3.4.3: Product: Mass Storage Device [1469609.294857] usb 2-3.4.3: Manufacturer: Generic [1469609.294858] usb 2-3.4.3: SerialNumber: ... [1469609.297238] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1469609.297340] scsi host0: usb-storage 2-3.4.3:1.0 [1469610.331314] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1469610.332106] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1469610.332464] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1469610.332654] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1469610.333118] sd 0:0:0:0: [sda] Media removed, stopped polling [1469610.333456] sd 0:0:0:0: [sda] Attached SCSI removable disk [1469610.766752] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1469610.767900] sd 0:0:0:1: [sdb] Write Protect is off [1469610.767905] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1469610.769030] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1469610.778745] sdb: sdb1 sdb2 [1469610.779029] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1469611.178923] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1469611.272045] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1469611.272051] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469611.272055] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1469611.272056] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1469611.272058] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1469611.272059] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469611.272060] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1469611.272064] Buffer I/O error on dev sdb2, logical block 0, lost sync page write [1469611.272182] EXT4-fs (sdb2): I/O error while writing superblock [1469611.272199] EXT4-fs (sdb2): mount failed [1469611.272263] Aborting journal on device sdb2-8. [1469720.797055] sdb: detected capacity change from 30703616 to 0 [1469723.667668] usb 2-3.4.3: USB disconnect, device number 21 [1469725.490967] usb 2-3.4.3: new SuperSpeed USB device number 22 using xhci_hcd [1469725.506403] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1469725.506413] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1469725.506417] usb 2-3.4.3: Product: Mass Storage Device [1469725.506420] usb 2-3.4.3: Manufacturer: Generic [1469725.506422] usb 2-3.4.3: SerialNumber: ... [1469725.507482] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1469725.507963] scsi host0: usb-storage 2-3.4.3:1.0 [1469726.555416] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1469726.556410] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1469726.557203] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1469726.557694] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1469726.557980] sd 0:0:0:0: [sda] Media removed, stopped polling [1469726.558717] sd 0:0:0:0: [sda] Attached SCSI removable disk [1469726.994657] sd 0:0:0:1: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [1469726.995852] sd 0:0:0:1: [sdb] Write Protect is off [1469726.995863] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1469726.996978] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1469727.004844] sdb: sdb1 sdb2 [1469727.005295] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1469727.492484] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1469727.555215] sd 0:0:0:1: [sdb] Unaligned partial completion (resid=64, sector_sz=512) [1469727.555222] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469727.555227] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1469727.555228] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1469727.555230] sd 0:0:0:1: [sdb] tag#0 <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff [1469727.555231] sd 0:0:0:1: [sdb] tag#0 CDB: Write(10) 2a 00 00 10 40 00 00 00 08 00 [1469727.555232] I/O error, dev sdb, sector 1064960 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [1469727.555236] Buffer I/O error on dev sdb2, logical block 0, lost sync page write [1469727.555349] EXT4-fs (sdb2): I/O error while writing superblock [1469727.555360] EXT4-fs (sdb2): mount failed [1469727.555498] Aborting journal on device sdb2-8. [1469735.636044] usb 2-3.4.3: USB disconnect, device number 22 [1469735.678484] device offline error, dev sdb, sector 16385 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [1469735.678499] Buffer I/O error on dev sdb1, logical block 1, lost async page write [1469742.849939] usb 2-3.4.3: new SuperSpeed USB device number 23 using xhci_hcd [1469742.863938] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1469742.863947] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1469742.863951] usb 2-3.4.3: Product: Mass Storage Device [1469742.863953] usb 2-3.4.3: Manufacturer: Generic [1469742.863955] usb 2-3.4.3: SerialNumber: ... [1469742.864820] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1469742.865462] scsi host0: usb-storage 2-3.4.3:1.0 [1469743.899462] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1469743.900323] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1469743.900822] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1469743.901312] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1469749.729931] sd 0:0:0:0: [sda] 246947840 512-byte logical blocks: (126 GB/118 GiB) [1469749.730494] sd 0:0:0:1: [sdb] Media removed, stopped polling [1469749.731223] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1469749.731603] sd 0:0:0:0: [sda] Write Protect is off [1469749.731612] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [1469749.732792] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1469749.740087] sda: sda1 [1469749.740429] sd 0:0:0:0: [sda] Attached SCSI removable disk [1469750.056586] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1469785.123569] usb 2-3.4.3: USB disconnect, device number 23 [1470122.726873] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1470246.420520] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1470444.297938] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1470760.399969] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1471969.844288] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1059448 end=1059449) time 230 us, min 1066, max 1079, scanline start 1050, end 1080 [1472703.781517] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1147521 end=1147522) time 207 us, min 1066, max 1079, scanline start 1061, end 1088 [1472879.480381] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1168605 end=1168606) time 173 us, min 1066, max 1079, scanline start 1057, end 1080 [1472882.730366] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1168995 end=1168996) time 219 us, min 1066, max 1079, scanline start 1050, end 1051 [1472912.263577] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1172539 end=1172540) time 226 us, min 1066, max 1079, scanline start 1059, end 1088 [1473484.651756] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1241226 end=1241227) time 188 us, min 1066, max 1079, scanline start 1065, end 1067 [1473487.468344] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1241564 end=1241565) time 155 us, min 1066, max 1079, scanline start 1063, end 1083 [1473492.068324] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1242116 end=1242117) time 142 us, min 1066, max 1079, scanline start 1062, end 1080 [1473494.951630] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1242462 end=1242463) time 181 us, min 1066, max 1079, scanline start 1059, end 1082 [1480079.735281] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1486314.265102] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1486654.615136] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=54593 end=54594) time 215 us, min 1066, max 1079, scanline start 1064, end 1092 [1486884.697008] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=82203 end=82204) time 204 us, min 1066, max 1079, scanline start 1057, end 1084 [1486913.030226] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=85603 end=85604) time 221 us, min 1066, max 1079, scanline start 1063, end 1092 [1487419.685347] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=146402 end=146403) time 136 us, min 1066, max 1079, scanline start 1062, end 1080 [1487653.617324] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=174474 end=174475) time 195 us, min 1066, max 1079, scanline start 1064, end 1089 [1488393.787760] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=263295 end=263296) time 187 us, min 1066, max 1079, scanline start 1061, end 1085 [1488404.604364] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=264593 end=264594) time 204 us, min 1066, max 1079, scanline start 1059, end 1086 [1488428.820883] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=267499 end=267500) time 192 us, min 1066, max 1079, scanline start 1061, end 1086 [1489164.108016] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=355734 end=355735) time 191 us, min 1066, max 1079, scanline start 1058, end 1083 [1496216.311776] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1497106.317923] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1497109.826912] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1497123.551921] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1508911.409629] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1508926.625218] usb 3-6: USB disconnect, device number 53 [1508926.875266] usb 3-6: new high-speed USB device number 54 using xhci_hcd [1508927.003871] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1508927.003895] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1508927.003902] usb 3-6: Product: ETU905A88-E [1508927.003909] usb 3-6: Manufacturer: EGIS [1508927.003914] usb 3-6: SerialNumber: ... [1517184.022594] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1523279.858833] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1531147.887211] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=34537 end=34538) time 189 us, min 1066, max 1079, scanline start 1055, end 1080 [1532056.068806] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1532125.626717] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1533571.733988] usb 3-3.1: new high-speed USB device number 55 using xhci_hcd [1533571.824393] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 5.10 [1533571.824407] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1533571.824411] usb 3-3.1: Product: Pixel Tablet [1533571.824415] usb 3-3.1: Manufacturer: Google [1533571.824417] usb 3-3.1: SerialNumber: ... [1534150.268806] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=394825 end=394826) time 211 us, min 1066, max 1079, scanline start 1052, end 1079 [1534436.572191] usb 3-3.1: USB disconnect, device number 55 [1535490.061763] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=2028 end=2029) time 126 us, min 1066, max 1079, scanline start 1063, end 1079 [1536313.745225] usb 2-3.4.3: new SuperSpeed USB device number 24 using xhci_hcd [1536313.759064] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1536313.759078] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1536313.759082] usb 2-3.4.3: Product: Mass Storage Device [1536313.759086] usb 2-3.4.3: Manufacturer: Generic [1536313.759088] usb 2-3.4.3: SerialNumber: ... [1536313.760130] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1536313.760912] scsi host0: usb-storage 2-3.4.3:1.0 [1536314.802610] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1536314.803540] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1536314.803915] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1536314.804364] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1536314.804705] sd 0:0:0:0: [sda] Media removed, stopped polling [1536314.805148] sd 0:0:0:0: [sda] Attached SCSI removable disk [1536315.512450] sd 0:0:0:1: [sdb] Media removed, stopped polling [1536315.513484] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1537219.486679] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1537220.441123] Bluetooth: hci0: Unknown advertising packet type: 0x40 [1537229.813730] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1538317.187756] wlo1: 80 MHz not supported, disabling VHT [1538317.191459] wlo1: authenticate with XXX (local address=XXX) [1538317.192444] wlo1: send auth to XXX (try 1/3) [1538317.228564] wlo1: authenticated [1538317.231386] wlo1: associate with XXX (try 1/3) [1538317.238357] wlo1: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [1538317.248231] wlo1: associated [1538975.046584] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1539249.715473] usb 2-3.4.3: USB disconnect, device number 24 [1539251.777586] usb 2-3.4.3: new SuperSpeed USB device number 25 using xhci_hcd [1539251.791047] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1539251.791058] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1539251.791061] usb 2-3.4.3: Product: Mass Storage Device [1539251.791065] usb 2-3.4.3: Manufacturer: Generic [1539251.791068] usb 2-3.4.3: SerialNumber: ... [1539251.792178] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1539251.792779] scsi host0: usb-storage 2-3.4.3:1.0 [1539252.843258] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1539252.843991] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1539252.844373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1539252.844724] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1539252.845290] sd 0:0:0:0: [sda] Media removed, stopped polling [1539252.845709] sd 0:0:0:0: [sda] Attached SCSI removable disk [1539253.553586] sd 0:0:0:1: [sdb] Media removed, stopped polling [1539253.554748] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1539270.213631] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=455649 end=455650) time 165 us, min 1066, max 1079, scanline start 1062, end 1083 [1539274.931509] usb 2-3.4.3: USB disconnect, device number 25 [1539282.417431] usb 2-3.4.3: new SuperSpeed USB device number 26 using xhci_hcd [1539282.432305] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1539282.432314] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1539282.432317] usb 2-3.4.3: Product: Mass Storage Device [1539282.432319] usb 2-3.4.3: Manufacturer: Generic [1539282.432321] usb 2-3.4.3: SerialNumber: ... [1539282.433775] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1539282.434276] scsi host0: usb-storage 2-3.4.3:1.0 [1539283.498419] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1539283.499191] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1539283.499608] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1539283.499964] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1539283.500321] sd 0:0:0:0: [sda] Media removed, stopped polling [1539283.500913] sd 0:0:0:0: [sda] Attached SCSI removable disk [1539283.878505] sd 0:0:0:1: [sdb] 245452800 512-byte logical blocks: (126 GB/117 GiB) [1539283.879632] sd 0:0:0:1: [sdb] Write Protect is off [1539283.879635] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1539283.880795] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1539283.886844] sdb: sdb1 [1539283.887028] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1539476.239127] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540128.925925] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540306.541534] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540310.693519] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540323.718687] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540502.847801] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540578.207689] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540860.815786] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1540928.830588] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1542020.502570] sdb: sdb1 sdb2 [1542020.655217] sdb: sdb1 sdb2 [1542020.839724] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1542020.839741] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1542020.839748] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1542020.839769] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [1542020.839773] I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [1542020.841052] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1542020.841062] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1542020.841068] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1542020.841073] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 41 08 00 00 f8 00 [1542020.841076] I/O error, dev sdb, sector 16648 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0 [1542020.841769] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1542020.841781] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1542020.841788] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1542020.841795] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [1542020.841798] I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1542020.841810] Buffer I/O error on dev sdb, logical block 0, async page read [1542020.842899] sdb: detected capacity change from 245452800 to 0 [1542020.843505] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1542020.843523] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1542020.843528] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1542020.843533] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [1542020.843536] I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1542020.843545] Buffer I/O error on dev sdb, logical block 0, async page read [1542020.843582] sd 0:0:0:1: [sdb] tag#0 access beyond end of device [1542020.843591] I/O error, dev sdb, sector 16648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1542020.843598] Buffer I/O error on dev sdb1, logical block 33, async page read [1542020.844156] sd 0:0:0:1: [sdb] tag#0 access beyond end of device [1542020.844167] I/O error, dev sdb, sector 16648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1542020.844175] Buffer I/O error on dev sdb1, logical block 33, async page read [1542020.844645] sd 0:0:0:1: [sdb] tag#0 access beyond end of device [1542020.844649] I/O error, dev sdb, sector 16648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1542020.844654] Buffer I/O error on dev sdb1, logical block 33, async page read [1542057.507521] usb 2-3.4.3: USB disconnect, device number 26 [1551972.117133] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=167204 end=167205) time 257 us, min 1066, max 1079, scanline start 1059, end 1093 [1551974.183710] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=167452 end=167453) time 176 us, min 1066, max 1079, scanline start 1060, end 1083 [1555093.796188] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555103.176214] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555171.809996] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555178.179210] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555349.740619] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555361.353450] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555380.328414] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555401.241377] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555417.257628] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555433.739290] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555437.257177] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555447.778517] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1555474.731266] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1556453.708788] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1558913.778464] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1560384.418517] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1566479.995419] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1574419.717115] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1574428.292114] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1574713.705241] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1574739.214235] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1575102.772193] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1575187.075107] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1583506.649377] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1583510.794099] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1583523.916223] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1595310.932815] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1595326.162067] usb 3-6: USB disconnect, device number 54 [1595326.412403] usb 3-6: new high-speed USB device number 56 using xhci_hcd [1595326.540334] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1595326.540348] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1595326.540352] usb 3-6: Product: ETU905A88-E [1595326.540355] usb 3-6: Manufacturer: EGIS [1595326.540358] usb 3-6: SerialNumber: ... [1599653.900166] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1603584.536999] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1609680.127830] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617227.119793] usb 2-3.4.3: new SuperSpeed USB device number 27 using xhci_hcd [1617227.133450] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1617227.133463] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1617227.133470] usb 2-3.4.3: Product: Mass Storage Device [1617227.133475] usb 2-3.4.3: Manufacturer: Generic [1617227.133479] usb 2-3.4.3: SerialNumber: ... [1617227.134713] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1617227.135418] scsi host0: usb-storage 2-3.4.3:1.0 [1617228.194599] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1617228.196098] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1617228.197040] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1617228.197674] scsi 0:0:0:1: Attached scsi generic sg1 type 0 [1617231.812931] sd 0:0:0:0: [sda] 500695040 512-byte logical blocks: (256 GB/239 GiB) [1617231.814234] sd 0:0:0:0: [sda] Write Protect is off [1617231.814253] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [1617231.815513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1617231.816085] sd 0:0:0:1: [sdb] Media removed, stopped polling [1617231.816862] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1617231.821708] sda: sda1 [1617231.822026] sd 0:0:0:0: [sda] Attached SCSI removable disk [1617232.147199] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1617239.859378] usb 2-3.4.3: USB disconnect, device number 27 [1617242.977733] usb 2-3.4.3: new SuperSpeed USB device number 28 using xhci_hcd [1617242.991178] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1617242.991189] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1617242.991193] usb 2-3.4.3: Product: Mass Storage Device [1617242.991197] usb 2-3.4.3: Manufacturer: Generic [1617242.991199] usb 2-3.4.3: SerialNumber: ... [1617242.992197] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1617242.992809] scsi host0: usb-storage 2-3.4.3:1.0 [1617244.002209] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1617244.003015] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1617244.003403] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1617244.003782] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1617247.560938] sd 0:0:0:1: [sdb] Media removed, stopped polling [1617247.561697] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1617247.562214] sd 0:0:0:0: [sda] 500695040 512-byte logical blocks: (256 GB/239 GiB) [1617247.563498] sd 0:0:0:0: [sda] Write Protect is off [1617247.563506] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [1617247.564698] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1617247.572073] sda: sda1 [1617247.572362] sd 0:0:0:0: [sda] Attached SCSI removable disk [1617247.884113] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1617305.123413] usb 2-3.4.3: USB disconnect, device number 28 [1617329.769702] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617334.395713] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617341.089713] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617520.591221] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617539.820147] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1617546.342156] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1618766.285146] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1618936.388678] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1618983.009482] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1620018.757346] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=350925 end=350926) time 188 us, min 1066, max 1079, scanline start 1054, end 1079 [1620960.204732] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1626618.157461] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1626706.829199] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1626710.932311] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1626724.093502] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1630143.475631] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1633741.907918] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1638875.301152] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1639836.497407] usb 2-3.4.3: new SuperSpeed USB device number 29 using xhci_hcd [1639836.510972] usb 2-3.4.3: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [1639836.510987] usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1639836.510992] usb 2-3.4.3: Product: Mass Storage Device [1639836.510997] usb 2-3.4.3: Manufacturer: Generic [1639836.511002] usb 2-3.4.3: SerialNumber: ... [1639836.512236] usb-storage 2-3.4.3:1.0: USB Mass Storage device detected [1639836.513546] scsi host0: usb-storage 2-3.4.3:1.0 [1639837.538849] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [1639837.540100] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [1639837.540922] sd 0:0:0:0: Attached scsi generic sg0 type 0 [1639837.541327] sd 0:0:0:1: Attached scsi generic sg1 type 0 [1639837.541737] sd 0:0:0:0: [sda] Media removed, stopped polling [1639837.542723] sd 0:0:0:0: [sda] Attached SCSI removable disk [1639837.925099] sd 0:0:0:1: [sdb] 500695040 512-byte logical blocks: (256 GB/239 GiB) [1639837.926335] sd 0:0:0:1: [sdb] Write Protect is off [1639837.926344] sd 0:0:0:1: [sdb] Mode Sense: 23 00 00 00 [1639837.927447] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [1639837.934043] sdb: sdb1 [1639837.934380] sd 0:0:0:1: [sdb] Attached SCSI removable disk [1639838.266703] exFAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [1639994.907019] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1640055.102826] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1641039.857641] sdb: sdb1 sdb2 [1641039.995728] sdb: sdb1 sdb2 [1641040.142424] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1641040.142432] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1641040.142434] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1641040.142437] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 50 00 00 00 08 00 [1641040.142438] I/O error, dev sdb, sector 20480 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [1641040.143501] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1641040.143508] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1641040.143511] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1641040.143514] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 10 50 00 00 00 08 00 [1641040.143516] I/O error, dev sdb, sector 1069056 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [1641040.144327] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1641040.144343] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1641040.144357] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1641040.144360] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 00 50 00 00 00 08 00 [1641040.144361] I/O error, dev sdb, sector 20480 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1641040.144365] Buffer I/O error on dev sdb1, logical block 512, async page read [1641040.145369] sd 0:0:0:1: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [1641040.145372] sd 0:0:0:1: [sdb] tag#0 Sense Key : Not Ready [current] [1641040.145374] sd 0:0:0:1: [sdb] tag#0 Add. Sense: Medium not present [1641040.145376] sd 0:0:0:1: [sdb] tag#0 CDB: Read(10) 28 00 00 10 50 00 00 00 08 00 [1641040.145377] I/O error, dev sdb, sector 1069056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [1641040.145381] Buffer I/O error on dev sdb2, logical block 512, async page read [1641040.145797] sdb: detected capacity change from 500695040 to 0 [1641044.739373] usb 2-3.4.3: USB disconnect, device number 29 [1642854.037154] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1646784.728370] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1647255.413882] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1652880.574443] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1654455.601645] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1658573.158385] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1659015.400664] loop5: detected capacity change from 0 to 505960 [1661655.814910] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1668856.014588] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1669907.849875] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1669911.036042] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1669924.247873] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1676056.211802] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1681710.415318] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1681725.626070] usb 3-6: USB disconnect, device number 56 [1681725.875847] usb 3-6: new high-speed USB device number 57 using xhci_hcd [1681726.003461] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1681726.003481] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1681726.003486] usb 3-6: Product: ETU905A88-E [1681726.003491] usb 3-6: Manufacturer: EGIS [1681726.003494] usb 3-6: SerialNumber: ... [1683256.399434] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1686054.132971] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1689984.834103] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1690456.609650] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1696080.680709] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1697656.817726] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1701773.396572] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1704884.658464] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1704895.990408] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1706545.695633] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=373708 end=373709) time 219 us, min 1066, max 1079, scanline start 1058, end 1086 [1707213.685827] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1707635.762290] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1712155.717279] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1712854.925949] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1713107.934158] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1713111.168196] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1713124.420317] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1714759.691550] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1715966.613896] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1715970.905820] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1715983.853831] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1716001.763773] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1716013.514769] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1716231.257157] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1718957.885408] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1719356.676032] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1719748.460915] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1726556.901280] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1728349.665434] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1728366.630365] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1728370.832450] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1728462.090281] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1731910.563537] loop7: detected capacity change from 0 to 151392 [1733757.135523] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1739280.861037] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1740959.804484] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1744973.534628] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1748084.954590] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1748162.704565] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1755362.899441] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1756308.023706] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1756311.324687] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1756324.580704] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1757959.968186] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1762563.081612] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1768110.795861] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1768126.022553] usb 3-6: USB disconnect, device number 57 [1768126.273628] usb 3-6: new high-speed USB device number 58 using xhci_hcd [1768126.401092] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1768126.401103] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1768126.401106] usb 3-6: Product: ETU905A88-E [1768126.401109] usb 3-6: Manufacturer: EGIS [1768126.401111] usb 3-6: SerialNumber: ... [1769763.250993] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1774750.255921] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1776963.498114] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1782480.966705] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1784163.689555] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1788173.666645] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1791285.037702] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1791363.833356] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1796553.369912] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1796630.646742] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1797614.168857] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1797672.123740] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1797714.168541] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1798564.078101] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1799508.269223] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1799513.685284] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1799524.757122] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1805764.289424] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1807991.145675] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1808023.077581] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1808048.591525] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1808488.786145] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1812964.589592] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1817950.428110] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1818013.694891] loop3: detected capacity change from 0 to 506040 [1820164.786021] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1825681.059847] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1827364.970084] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1831373.795960] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1834485.093777] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1834565.175428] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1841765.461573] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1842708.311843] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1842713.798865] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1842724.871770] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1848965.667425] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1854510.197158] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1854525.441281] usb 3-6: USB disconnect, device number 58 [1854525.691761] usb 3-6: new high-speed USB device number 59 using xhci_hcd [1854525.820365] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1854525.820379] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1854525.820383] usb 3-6: Product: ETU905A88-E [1854525.820387] usb 3-6: Manufacturer: EGIS [1854525.820389] usb 3-6: SerialNumber: ... [1856165.837675] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1858852.012786] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1861150.584082] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1863366.066738] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1868881.234263] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1870568.402835] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1874573.947506] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1877771.396175] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1884974.354648] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1885908.418570] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1885913.945628] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1885925.053814] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1892177.321416] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1893736.567148] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1899380.308192] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1902052.157174] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1906583.303103] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1912081.335519] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1913786.244251] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1914549.981667] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=133807 end=133808) time 168 us, min 1066, max 1079, scanline start 1057, end 1079 [1917774.115158] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1920986.469360] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1928189.187986] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1929108.517184] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1929114.052261] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1929125.215220] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1935392.204231] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1936936.754788] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1940909.785785] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1940925.012215] usb 3-6: USB disconnect, device number 59 [1940925.263605] usb 3-6: new high-speed USB device number 60 using xhci_hcd [1940925.391909] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [1940925.391918] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1940925.391920] usb 3-6: Product: ETU905A88-E [1940925.391923] usb 3-6: Manufacturer: EGIS [1940925.391924] usb 3-6: SerialNumber: ... [1942595.244192] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1945258.254941] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1949798.177259] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1955281.507074] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1957001.185339] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1960974.283958] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1964204.135475] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1969937.627371] usb 3-3.4-port1: disabled by hub (EMI?), re-enabling... [1969937.627560] usb 3-3.4.1: USB disconnect, device number 47 [1969937.911718] usb 3-3.4.1: new full-speed USB device number 61 using xhci_hcd [1969938.018724] usb 3-3.4.1: New USB device found, idVendor=0b0e, idProduct=1113, bcdDevice= 4.02 [1969938.018740] usb 3-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [1969938.018745] usb 3-3.4.1: Product: Jabra Engage 75 [1969938.018748] usb 3-3.4.1: Manufacturer: GN Audio A/S [1969938.018751] usb 3-3.4.1: SerialNumber: ... [1969938.182713] input: GN Audio A/S Jabra Engage 75 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.3/0003:0B0E:1113.0023/input/input65 [1969938.234898] jabra 0003:0B0E:1113.0023: input,hiddev1,hidraw6: USB HID v1.11 Device [GN Audio A/S Jabra Engage 75] on usb-0000:00:14.0-3.4.1/input3 [1970344.538655] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1970381.932665] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1971375.178530] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1971407.078520] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1971690.935550] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1972037.300464] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1972067.726420] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1972308.670770] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1972314.199798] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1972325.368615] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1973217.931082] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=219769 end=219770) time 166 us, min 1073, max 1079, scanline start 1072, end 1083 [1973483.210092] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1978607.293097] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1980136.960283] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1985810.084838] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1988467.118744] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1993013.001091] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [1998481.629585] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2000216.032716] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2004174.389936] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2007013.996081] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2007418.972912] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2014619.167114] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2015508.830844] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2015514.294943] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2015525.514882] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2018806.072815] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2021821.951553] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2023337.147260] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2027309.687235] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2027324.917008] usb 3-6: USB disconnect, device number 60 [2027325.167691] usb 3-6: new high-speed USB device number 62 using xhci_hcd [2027325.295913] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [2027325.295929] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2027325.295933] usb 3-6: Product: ETU905A88-E [2027325.295937] usb 3-6: Manufacturer: EGIS [2027325.295939] usb 3-6: SerialNumber: ... [2029024.933072] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2036228.000540] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2041681.826491] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2043430.911030] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2050214.196751] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2050633.931428] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2051717.163190] loop8: detected capacity change from 0 to 1057184 [2053678.903484] wlo1: 80 MHz not supported, disabling VHT [2053678.906680] wlo1: authenticate with XXX (local address=XXX) [2053678.907651] wlo1: send auth to XXX (try 1/3) [2053678.936711] wlo1: authenticated [2053678.937486] wlo1: associate with XXX (try 1/3) [2053678.942710] wlo1: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [2053678.952497] wlo1: associated [2054057.281284] wlo1: 80 MHz not supported, disabling VHT [2054057.284936] wlo1: authenticate with XXX (local address=XXX) [2054057.285937] wlo1: send auth to XXX (try 1/3) [2054057.388111] wlo1: send auth to XXX (try 2/3) [2054057.488810] wlo1: send auth to XXX (try 3/3) [2054057.590888] wlo1: authentication with XXX timed out [2054205.728007] wlo1: authenticate with XXX (local address=XXX) [2054205.728928] wlo1: send auth to XXX (try 1/3) [2054205.760500] wlo1: authenticated [2054205.761262] wlo1: associate with XXX (try 1/3) [2054205.762930] wlo1: RX AssocResp from XXX (capab=0x11 status=0 aid=1) [2054205.771840] wlo1: associated [2054213.716935] wlo1: deauthenticated from XXX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [2055589.267875] usb 3-3.1: new full-speed USB device number 63 using xhci_hcd [2055589.356217] usb 3-3.1: not running at top speed; connect to a high speed hub [2055589.357365] usb 3-3.1: New USB device found, idVendor=1782, idProduct=4d00, bcdDevice=24.30 [2055589.357374] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2055589.357379] usb 3-3.1: Product: Gadget Serial [2055589.357383] usb 3-3.1: Manufacturer: spreadtrum with dwc3-gadget [2055592.923444] usb 3-3.1: USB disconnect, device number 63 [2055616.661800] usb 3-3.1: new high-speed USB device number 64 using xhci_hcd [2055616.751459] usb 3-3.1: New USB device found, idVendor=1782, idProduct=4038, bcdDevice= 4.04 [2055616.751468] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2055616.751471] usb 3-3.1: Product: Unisoc Phone [2055616.751473] usb 3-3.1: Manufacturer: Unisoc Phone [2055616.751474] usb 3-3.1: SerialNumber: ... [2055616.768359] rndis_host 3-3.1:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-3.1, RNDIS device, XXX [2055616.809468] rndis_host 3-3.1:1.0 enxe6c6a3ae03f3: renamed from eth0 [2055714.763080] wlo1: authenticate with XXX (local address=XXX) [2055714.764037] wlo1: send auth to XXX (try 1/3) [2055714.796845] wlo1: authenticated [2055714.797522] wlo1: associate with XXX (try 1/3) [2055714.799519] wlo1: RX AssocResp from XXX (capab=0x8111 status=0 aid=6) [2055714.808843] wlo1: associated [2055848.667501] usb 3-3.1: USB disconnect, device number 64 [2055848.667879] rndis_host 3-3.1:1.0 enxe6c6a3ae03f3: unregister 'rndis_host' usb-0000:00:14.0-3.1, RNDIS device [2055861.396281] usb 3-3.1: new high-speed USB device number 65 using xhci_hcd [2055861.485340] usb 3-3.1: New USB device found, idVendor=1782, idProduct=4038, bcdDevice= 4.04 [2055861.485353] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2055861.485358] usb 3-3.1: Product: Unisoc Phone [2055861.485362] usb 3-3.1: Manufacturer: Unisoc Phone [2055861.485364] usb 3-3.1: SerialNumber: ... [2055861.507368] rndis_host 3-3.1:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-3.1, RNDIS device, XXX [2055861.569598] rndis_host 3-3.1:1.0 enx7ec79e6b8613: renamed from eth0 [2055892.762895] wlo1: authenticate with XXX (local address=XXX) [2055892.763791] wlo1: send auth to XXX (try 1/3) [2055892.795226] wlo1: authenticated [2055892.796104] wlo1: associate with XXX (try 1/3) [2055892.797947] wlo1: RX AssocResp from XXX (capab=0x8111 status=0 aid=6) [2055892.805752] wlo1: associated [2056030.171556] usb 3-3.1: USB disconnect, device number 65 [2056030.171865] rndis_host 3-3.1:1.0 enx7ec79e6b8613: unregister 'rndis_host' usb-0000:00:14.0-3.1, RNDIS device [2056039.850457] wlo1: authenticate with XXX (local address=XXX) [2056039.851410] wlo1: send auth to XXX (try 1/3) [2056039.981970] wlo1: send auth to XXX (try 2/3) [2056040.082859] wlo1: send auth to XXX (try 3/3) [2056040.184420] wlo1: authentication with XXX timed out [2056186.845627] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2056487.829875] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2057836.932286] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2058708.941855] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2058714.421360] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2058725.683581] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059074.012211] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059080.232299] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059136.927020] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059140.686973] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059148.651951] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059219.246728] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059232.782638] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059249.212724] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059257.543587] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2059293.793499] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2061769.456991] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065303.574029] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065411.242664] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065443.363563] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065615.823941] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065622.259945] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065699.355656] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065754.086434] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065765.965391] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2065796.722864] gedit[27227]: segfault at 5f70541e43a8 ip 000078c3bff5fda8 sp 00007ffddac56c20 error 4 in libgtk-3.so.0.2409.32[78c3bfc83000+3ae000] likely on CPU 7 (core 12, socket 0) [2065796.722889] Code: e9 72 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 55 48 89 e5 41 56 41 55 49 89 fd 41 54 53 48 89 fb 0f 1f 80 00 00 00 00 <48> 8b 43 18 49 89 dc 48 8b 98 d0 00 00 00 48 85 db 75 ed f6 40 02 [2066537.620409] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2069785.682883] usb 2-3.2: new SuperSpeed Plus Gen 2x1 USB device number 30 using xhci_hcd [2069785.724397] usb 2-3.2: New USB device found, idVendor=2109, idProduct=0822, bcdDevice=90.13 [2069785.724435] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2069785.724440] usb 2-3.2: Product: USB3.1 Hub [2069785.724443] usb 2-3.2: Manufacturer: VIA Labs, Inc. [2069785.724446] usb 2-3.2: SerialNumber: ... [2069785.726308] hub 2-3.2:1.0: USB hub found [2069785.726814] hub 2-3.2:1.0: 4 ports detected [2069785.747467] usb 3-3.1: new high-speed USB device number 66 using xhci_hcd [2069785.920377] usb 3-3.1: New USB device found, idVendor=2109, idProduct=2822, bcdDevice=90.13 [2069785.920385] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2069785.920387] usb 3-3.1: Product: USB2.0 Hub [2069785.920389] usb 3-3.1: Manufacturer: VIA Labs, Inc. [2069785.920390] usb 3-3.1: SerialNumber: ... [2069785.921935] hub 3-3.1:1.0: USB hub found [2069785.922157] hub 3-3.1:1.0: 4 ports detected [2069804.915199] usb 2-3.2: USB disconnect, device number 30 [2069805.019759] usb 3-3.1: USB disconnect, device number 66 [2071164.558272] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=244737 end=244738) time 183 us, min 1066, max 1079, scanline start 1063, end 1087 [2072237.690996] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2074560.799014] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2077111.136432] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=177529 end=177530) time 188 us, min 1066, max 1079, scanline start 1065, end 1089 [2077170.161957] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2077176.127123] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2077189.809920] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2077210.160843] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2079438.026552] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2084881.968444] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2086640.985272] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2087139.035253] usb 3-3.4-port1: disabled by hub (EMI?), re-enabling... [2087139.035494] usb 3-3.4.1: USB disconnect, device number 61 [2087139.296593] usb 3-3.4.1: new full-speed USB device number 67 using xhci_hcd [2087139.403818] usb 3-3.4.1: New USB device found, idVendor=0b0e, idProduct=1113, bcdDevice= 4.02 [2087139.403828] usb 3-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2087139.403831] usb 3-3.4.1: Product: Jabra Engage 75 [2087139.403833] usb 3-3.4.1: Manufacturer: GN Audio A/S [2087139.403835] usb 3-3.4.1: SerialNumber: ... [2087139.477276] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2087139.574142] input: GN Audio A/S Jabra Engage 75 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.3/0003:0B0E:1113.0024/input/input66 [2087139.625845] jabra 0003:0B0E:1113.0024: input,hiddev1,hidraw6: USB HID v1.11 Device [GN Audio A/S Jabra Engage 75] on usb-0000:00:14.0-3.4.1/input3 [2093414.372116] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2093843.942007] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2093874.582852] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2094031.238482] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2101044.176999] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2101909.078728] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2101914.735718] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2101925.825690] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2105208.612689] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108246.866547] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108643.882524] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108874.660118] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108934.630860] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108966.272824] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2108994.622813] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2109737.797141] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2113709.496501] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2113724.708917] usb 3-6: USB disconnect, device number 62 [2113724.958944] usb 3-6: new high-speed USB device number 68 using xhci_hcd [2113725.086507] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [2113725.086520] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2113725.086523] usb 3-6: Product: ETU905A88-E [2113725.086526] usb 3-6: Manufacturer: EGIS [2113725.086529] usb 3-6: SerialNumber: ... [2115449.813178] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2122652.705050] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2127715.503346] systemd[1]: systemd 255.4-1ubuntu8.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [2127715.503516] systemd[1]: Detected architecture x86-64. [2127715.583851] systemd[1]: /etc/systemd/system/xray.service:7: Special user nobody configured, this is not safe! [2127715.602019] systemd[1]: /usr/lib/systemd/system/ntopng.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [2128083.008674] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2129855.782200] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2131273.634308] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2136614.600061] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2137059.204572] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2137203.826188] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2137925.267143] usb 3-3.1: new high-speed USB device number 69 using xhci_hcd [2137925.357751] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 5.10 [2137925.357766] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2137925.357772] usb 3-3.1: Product: Pixel Tablet [2137925.357776] usb 3-3.1: Manufacturer: Google [2137925.357779] usb 3-3.1: SerialNumber: ... [2138201.819434] usb 3-3.1: USB disconnect, device number 69 [2139277.204901] usb 3-3.1: new high-speed USB device number 70 using xhci_hcd [2139277.295517] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 5.10 [2139277.295525] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2139277.295526] usb 3-3.1: Product: Pixel Tablet [2139277.295528] usb 3-3.1: Manufacturer: Google [2139277.295529] usb 3-3.1: SerialNumber: ... [2139617.917084] traps: unity-fallback-[7305] general protection fault ip:5b966c312ec0 sp:7fff12217bf0 error:0 in unity-fallback-mount-helper[5b966c311000+5000] [2144259.752890] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2144507.107637] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2145109.245210] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2145115.352157] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2145126.012135] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147385.776829] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147390.401023] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147400.460971] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147423.837724] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147443.673702] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2147751.371808] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2148188.236482] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2148408.711853] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2151462.689539] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2151845.769316] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152135.398250] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152169.234060] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152194.517274] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152255.264837] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152275.862729] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152293.987700] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2152938.090769] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2155319.006454] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2155804.276048] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2156874.659323] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2157076.338616] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2158048.273107] workqueue: mmput_async_fn hogged CPU for >10000us 8 times, consider switching to WQ_UNBOUND [2158663.015962] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2162519.380606] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2165863.284833] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2169774.493676] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2173065.635417] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2176987.454143] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2179814.822684] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2180268.632990] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2184234.444875] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2187471.601748] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2188309.399491] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2188315.541346] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2188326.179532] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2190951.893465] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2191494.416670] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2194674.537077] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2195335.774253] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2195394.399779] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2195454.404677] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2195514.418431] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2196138.289143] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2198754.405426] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2200109.435036] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2200124.657837] usb 3-6: USB disconnect, device number 68 [2200124.908808] usb 3-6: new high-speed USB device number 71 using xhci_hcd [2200125.036309] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [2200125.036323] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2200125.036326] usb 3-6: Product: ETU905A88-E [2200125.036330] usb 3-6: Manufacturer: EGIS [2200125.036332] usb 3-6: SerialNumber: ... [2201874.666352] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2206014.396959] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2207888.730419] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2209074.892265] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2213037.528588] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2213274.385904] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2216275.213166] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2220534.370197] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2222371.212027] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2223015.021265] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2223475.343214] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2227734.614022] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2229139.667665] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2229487.321725] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2229532.024474] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2229562.034435] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2229899.024193] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2230407.513328] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2230430.740285] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2230675.605723] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2231419.971155] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2231509.614111] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2231515.845944] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2231526.324135] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2232660.714318] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233107.973890] Purging GPU memory, 0 pages freed, 0 pages still pinned, 10532 pages left available. [2233107.974056] ferdium invoked oom-killer: gfp_mask=0x140cca(GFP_HIGHUSER_MOVABLE|__GFP_COMP), order=0, oom_score_adj=200 [2233107.974063] CPU: 17 PID: 2089840 Comm: ferdium Not tainted 6.8.0-78-generic #78-Ubuntu [2233107.974067] Hardware name: ASUSTeK COMPUTER INC. Zenbook UX3402VA_UX3402VA/UX3402VA, BIOS UX3402VA.304 01/02/2024 [2233107.974069] Call Trace: [2233107.974071] <TASK> [2233107.974075] dump_stack_lvl+0x76/0xa0 [2233107.974081] dump_stack+0x10/0x20 [2233107.974084] dump_header+0x49/0x210 [2233107.974088] oom_kill_process+0x118/0x280 [2233107.974091] ? oom_evaluate_task+0x143/0x1e0 [2233107.974095] out_of_memory+0x103/0x350 [2233107.974098] __alloc_pages_may_oom+0x10c/0x1d0 [2233107.974103] __alloc_pages_slowpath.constprop.0+0x420/0x9f0 [2233107.974107] __alloc_pages+0x31f/0x350 [2233107.974111] alloc_pages_mpol+0x91/0x210 [2233107.974114] alloc_pages+0x5b/0xd0 [2233107.974116] folio_alloc+0x15/0x40 [2233107.974118] filemap_alloc_folio+0xf4/0x100 [2233107.974121] __filemap_get_folio+0x195/0x2d0 [2233107.974125] filemap_fault+0x15c/0x8e0 [2233107.974128] __do_fault+0x3a/0x190 [2233107.974132] do_read_fault+0x133/0x200 [2233107.974135] do_fault+0xf0/0x260 [2233107.974138] handle_pte_fault+0x114/0x1d0 [2233107.974141] __handle_mm_fault+0x654/0x800 [2233107.974146] handle_mm_fault+0x18a/0x380 [2233107.974149] do_user_addr_fault+0x169/0x670 [2233107.974154] exc_page_fault+0x83/0x1b0 [2233107.974159] asm_exc_page_fault+0x27/0x30 [2233107.974162] RIP: 0033:0x5a7b73ddbb90 [2233107.974203] Code: Unable to access opcode bytes at 0x5a7b73ddbb66. [2233107.974204] RSP: 002b:00007ffe0baf04e8 EFLAGS: 00010202 [2233107.974207] RAX: 000012c40051f820 RBX: 000038ac0042b9a8 RCX: 000038afffffffff [2233107.974209] RDX: 0000000000000014 RSI: 000032f300101f91 RDI: 000012c400404000 [2233107.974211] RBP: 00007ffe0baf06a0 R08: 00000000b6b9d7b1 R09: 00000000006c4a9b [2233107.974213] R10: 00005a7b720795f0 R11: 0000000003c14d35 R12: 0000000000000000 [2233107.974214] R13: 00005a7b7b4bf840 R14: 000038ac0198cb80 R15: 000038ac004582c0 [2233107.974217] </TASK> [2233107.974218] Mem-Info: [2233107.974220] active_anon:2046113 inactive_anon:1517001 isolated_anon:0 active_file:256 inactive_file:214 isolated_file:0 unevictable:2663 dirty:0 writeback:66 slab_reclaimable:134763 slab_unreclaimable:132403 mapped:102830 shmem:666336 pagetables:58252 sec_pagetables:0 bounce:0 kernel_misc_reclaimable:0 free:35249 free_pcp:671 free_cma:0 [2233107.974226] Node 0 active_anon:8184452kB inactive_anon:6068004kB active_file:1024kB inactive_file:856kB unevictable:10652kB isolated(anon):0kB isolated(file):0kB mapped:411320kB dirty:0kB writeback:264kB shmem:2665344kB shmem_thp:20480kB shmem_pmdmapped:0kB anon_thp:0kB writeback_tmp:0kB kernel_stack:64512kB pagetables:233008kB sec_pagetables:0kB all_unreclaimable? no [2233107.974231] Node 0 DMA free:12908kB boost:0kB min:64kB low:80kB high:96kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB [2233107.974236] lowmem_reserve[]: 0 736 15511 15511 15511 [2233107.974241] Node 0 DMA32 free:61848kB boost:0kB min:3204kB low:4004kB high:4804kB reserved_highatomic:0KB active_anon:428244kB inactive_anon:264932kB active_file:36kB inactive_file:32kB unevictable:16kB writepending:0kB present:896588kB managed:830652kB mlocked:16kB bounce:0kB free_pcp:2436kB local_pcp:0kB free_cma:0kB [2233107.974246] lowmem_reserve[]: 0 0 14774 14774 14774 [2233107.974250] Node 0 Normal free:66240kB boost:0kB min:64308kB low:80384kB high:96460kB reserved_highatomic:2048KB active_anon:7756232kB inactive_anon:5803048kB active_file:252kB inactive_file:796kB unevictable:10636kB writepending:192kB present:15474688kB managed:15137732kB mlocked:80kB bounce:0kB free_pcp:248kB local_pcp:0kB free_cma:0kB [2233107.974255] lowmem_reserve[]: 0 0 0 0 0 [2233107.974259] Node 0 DMA: 13*4kB (U) 1*8kB (U) 1*16kB (U) 1*32kB (U) 0*64kB 0*128kB 0*256kB 1*512kB (U) 0*1024kB 2*2048kB (UM) 2*4096kB (M) = 12908kB [2233107.974273] Node 0 DMA32: 94*4kB (UME) 233*8kB (UME) 145*16kB (UME) 108*32kB (UME) 270*64kB (UME) 129*128kB (UME) 73*256kB (UME) 3*512kB (UE) 0*1024kB 0*2048kB 0*4096kB = 62032kB [2233107.974287] Node 0 Normal: 8261*4kB (UME) 2876*8kB (UME) 437*16kB (UME) 123*32kB (UME) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 66980kB [2233107.974298] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [2233107.974300] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [2233107.974302] 761264 total pagecache pages [2233107.974303] 93977 pages in swap cache [2233107.974304] Free swap = 124kB [2233107.974305] Total swap = 16777212kB [2233107.974306] 4096817 pages RAM [2233107.974307] 0 pages HighMem/MovableOnly [2233107.974308] 100881 pages reserved [2233107.974309] 0 pages hwpoisoned [2233107.974310] Tasks state (memory values in pages): [2233107.974311] [ pid ] uid tgid total_vm rss rss_anon rss_file rss_shmem pgtables_bytes swapents oom_score_adj name [2233107.974320] [ 475] 0 475 37619 613 280 333 0 303104 293 -250 systemd-journal [2233107.974325] [ 556] 0 556 7705 390 320 70 0 90112 680 -1000 systemd-udevd [2233107.974330] [ 1427] 122 1427 1992 360 0 360 0 61440 40 0 rpcbind [2233107.974333] [ 1429] 996 1429 22819 560 80 480 0 90112 160 0 systemd-timesyn [2233107.974337] [ 1544] 0 1544 80540 399 160 239 0 114688 120 0 accounts-daemon [2233107.974340] [ 1547] 109 1547 2253 560 240 320 0 57344 120 0 avahi-daemon [2233107.974343] [ 1551] 0 1551 4523 400 40 360 0 61440 0 0 cron [2233107.974346] [ 1552] 101 1552 3202 1003 803 200 0 69632 160 -900 dbus-daemon [2233107.974349] [ 1556] 987 1556 109769 343 80 263 0 176128 520 0 gnome-remote-de [2233107.974352] [ 1565] 989 1565 100555 1153 849 304 0 139264 1200 0 polkitd [2233107.974354] [ 1572] 0 1572 3001 280 40 240 0 69632 120 0 smartd [2233107.974357] [ 1578] 0 1578 795659 3270 3150 120 0 462848 2082 -900 snapd [2233107.974360] [ 1582] 0 1582 79651 400 0 400 0 106496 200 0 switcheroo-cont [2233107.974362] [ 1590] 0 1590 4556 413 53 360 0 86016 198 0 systemd-logind [2233107.974365] [ 1591] 0 1591 108399 360 120 240 0 143360 120 0 thermald [2233107.974367] [ 1610] 109 1610 2106 246 46 200 0 53248 40 0 avahi-daemon [2233107.974370] [ 1631] 0 1631 86724 1036 760 276 0 163840 520 0 NetworkManager [2233107.974372] [ 1638] 0 1638 4602 320 240 80 0 77824 200 0 wpa_supplicant [2233107.974375] [ 1650] 102 1650 55627 320 120 200 0 81920 381 0 rsyslogd [2233107.974377] [ 1689] 0 1689 98026 103 0 103 0 131072 440 0 ModemManager [2233107.974380] [ 1697] 0 1697 80549 269 0 269 0 114688 160 0 boltd [2233107.974383] [ 1904] 0 1904 92877 7800 7520 280 0 212992 4440 0 upowerd [2233107.974385] [ 2382] 0 2382 5049 520 240 280 0 65536 120 0 check_mk_agent [2233107.974388] [ 2385] 995 2385 4389 80 80 0 0 69632 120 0 cmk-agent-ctl [2233107.974391] [ 2396] 0 2396 119760 1636 1356 280 0 262144 5840 0 expressvpn-daem [2233107.974393] [ 2413] 125 2413 19783 480 280 200 0 131072 480 0 redis-server [2233107.974396] [ 2432] 0 2432 31683 560 160 400 0 139264 2280 0 unattended-upgr [2233107.974398] [ 2437] 65534 2437 314376 1000 1000 0 0 163840 320 0 xray [2233107.974401] [ 2452] 0 2452 635573 2616 2336 280 0 401408 1599 -999 containerd [2233107.974403] [ 2490] 0 2490 95019 390 40 350 0 94208 200 0 lightdm [2233107.974406] [ 2499] 0 2499 4343 320 0 320 0 49152 0 0 agetty [2233107.974408] [ 2514] 0 2514 1801 520 146 334 40 53248 360 0 apache2 [2233107.974411] [ 2518] 0 2518 507349 6109 5789 320 0 1306624 43880 0 Xorg [2233107.974414] [ 2699] 997 2699 12918 595 275 320 0 122880 4240 0 gunicorn: maste [2233107.974416] [ 2780] 997 2780 21607 732 492 240 0 192512 10400 0 gunicorn: worke [2233107.974419] [ 2904] 126 2904 548437 3014 1316 1698 0 770048 48160 0 4/flow_checks [2233107.974421] [ 3102] 997 3102 56276 1093 722 371 0 172032 7680 0 python3 [2233107.974424] [ 3351] 997 3351 27562 1992 1672 320 0 237568 16080 0 liveproxyd[mast [2233107.974426] [ 3530] 997 3530 18181 1456 1096 360 0 151552 7360 0 python3 [2233107.974429] [ 3554] 997 3554 126225 466 180 286 0 147456 240 0 rrdcached [2233107.974431] [ 3595] 997 3595 468534 497 257 240 0 356352 2800 0 cmc [2233107.974434] [ 3625] 997 3625 45164 754 354 400 0 335872 21760 0 python3 [2233107.974436] [ 3628] 997 3628 45167 791 391 400 0 331776 21600 0 python3 [2233107.974439] [ 3632] 997 3632 5612 280 0 280 0 86016 160 0 checkhelper [2233107.974441] [ 3634] 997 3634 5612 400 0 400 0 86016 200 0 checkhelper [2233107.974444] [ 3635] 997 3635 5612 400 0 400 0 86016 200 0 checkhelper [2233107.974446] [ 3636] 997 3636 5612 400 0 400 0 90112 200 0 checkhelper [2233107.974448] [ 3638] 997 3638 5612 400 0 400 0 86016 200 0 checkhelper [2233107.974451] [ 3639] 997 3639 50718 5743 5263 480 0 380928 20800 0 python3 [2233107.974453] [ 3640] 997 3640 48202 730 370 360 0 360448 23160 0 python3 [2233107.974456] [ 3642] 997 3642 47381 338 98 240 0 352256 22760 0 python3 [2233107.974458] [ 3643] 997 3643 47411 750 390 360 0 352256 22280 0 python3 [2233107.974460] [ 3644] 997 3644 45148 793 433 360 0 339968 21720 0 python3 [2233107.974463] [ 3646] 997 3646 31398 13730 13330 400 0 282624 7320 0 python3 [2233107.974465] [ 3648] 997 3648 21516 8595 8235 360 0 196608 2680 0 python3 [2233107.974468] [ 3649] 997 3649 19371 1981 1621 360 0 180224 6960 0 python3 [2233107.974470] [ 3651] 997 3651 18519 520 120 400 0 176128 7760 0 python3 [2233107.974472] [ 3652] 997 3652 17678 765 365 400 0 176128 6640 0 python3 [2233107.974475] [ 3653] 997 3653 17067 631 311 320 0 163840 6040 0 python3 [2233107.974477] [ 3655] 997 3655 17067 789 389 400 0 163840 5960 0 python3 [2233107.974480] [ 3656] 997 3656 17067 777 377 400 0 159744 5960 0 python3 [2233107.974482] [ 3657] 997 3657 17067 675 355 320 0 163840 6000 0 python3 [2233107.974484] [ 3659] 997 3659 17067 687 327 360 0 163840 6000 0 python3 [2233107.974486] [ 3660] 997 3660 17067 719 359 360 0 163840 5960 0 python3 [2233107.974489] [ 3665] 997 3665 17067 555 235 320 0 163840 6080 0 python3 [2233107.974491] [ 3666] 997 3666 17067 675 275 400 0 163840 6040 0 python3 [2233107.974494] [ 3667] 997 3667 32935 600 200 400 0 237568 10120 0 python3 [2233107.974496] [ 3670] 997 3670 1271 240 0 240 0 45056 0 0 icmpsender [2233107.974498] [ 3671] 997 3671 3023 760 0 760 0 61440 80 0 icmpreceiver [2233107.974501] [ 3809] 997 3809 4640 704 314 287 103 86016 356 0 apache2 [2233107.974503] [ 4352] 107 4352 3186 321 41 280 0 65536 40 0 kerneloops [2233107.974506] [ 4360] 107 4360 3186 322 82 240 0 69632 40 0 kerneloops [2233107.974508] [ 4977] 118 4977 5735 520 0 520 0 61440 40 0 rtkit-daemon [2233107.974511] [ 5407] 997 5407 36937 513 311 202 0 151552 7480 0 dcd [2233107.974513] [ 5470] 997 5470 17903 402 202 200 0 126976 2359 0 redis-server [2233107.974516] [ 5532] 0 5532 150801 200 40 160 0 131072 320 0 logid [2233107.974518] [ 6072] 119 6072 82334 377 120 257 0 139264 1320 0 colord [2233107.974521] [ 6084] 0 6084 58667 324 44 280 0 90112 360 0 lightdm [2233107.974523] [ 6379] 1000 6379 5563 760 480 280 0 90112 440 100 systemd [2233107.974526] [ 6380] 1000 6380 5297 592 232 360 0 77824 200 100 (sd-pam) [2233107.974528] [ 6393] 1000 6393 52826 2037 1368 449 220 167936 3916 200 pipewire [2233107.974531] [ 6394] 1000 6394 26601 360 0 360 0 86016 200 200 pipewire [2233107.974534] [ 6395] 1000 6395 144538 1205 855 350 0 319488 1686 200 wireplumber [2233107.974536] [ 6397] 1000 6397 48558 3657 3321 336 0 262144 14751 200 pipewire-pulse [2233107.974539] [ 6398] 1000 6398 118261 400 80 320 0 135168 360 200 gnome-keyring-d [2233107.974541] [ 6403] 1000 6403 3261 765 605 160 0 69632 360 200 dbus-daemon [2233107.974544] [ 6417] 1000 6417 710 280 0 280 0 45056 0 0 run-systemd-ses [2233107.974546] [ 6540] 1000 6540 118187 1807 1567 240 0 126976 560 0 ibus-daemon [2233107.974549] [ 6549] 1000 6549 80874 600 200 400 0 118784 80 200 gvfsd [2233107.974551] [ 6557] 1000 6557 117107 320 40 280 0 122880 200 200 gvfsd-fuse [2233107.974554] [ 6559] 1000 6559 79804 439 80 359 0 110592 120 0 ibus-dconf [2233107.974556] [ 6561] 1000 6561 119239 927 542 385 0 245760 2160 0 ibus-ui-gtk3 [2233107.974558] [ 6562] 1000 6562 98675 545 225 320 0 221184 3240 0 ibus-extension- [2233107.974561] [ 6568] 1000 6568 78404 250 37 213 0 192512 1760 0 ibus-x11 [2233107.974563] [ 6574] 1000 6574 79982 600 280 320 0 102400 400 200 ibus-portal [2233107.974566] [ 6593] 1000 6593 95837 400 0 400 0 118784 200 200 at-spi-bus-laun [2233107.974568] [ 6601] 1000 6601 2464 440 40 400 0 61440 160 200 dbus-daemon [2233107.974571] [ 6605] 1000 6605 59056 320 40 280 0 90112 240 200 at-spi2-registr [2233107.974573] [ 6608] 1000 6608 178029 521 157 364 0 200704 760 200 xdg-desktop-por [2233107.974575] [ 6619] 1000 6619 136321 400 0 400 0 147456 200 200 xdg-document-po [2233107.974578] [ 6626] 1000 6626 79664 440 0 440 0 102400 160 200 xdg-permission- [2233107.974580] [ 6635] 1000 6635 686 320 0 320 0 49152 0 200 fusermount3 [2233107.974583] [ 6639] 1000 6639 331328 2784 2375 299 110 360448 4000 200 xdg-desktop-por [2233107.974585] [ 6641] 1000 6641 61404 320 80 240 0 98304 120 0 ibus-engine-sim [2233107.974588] [ 6847] 1000 6847 7127 440 80 360 0 90112 80 0 systemctl [2233107.974590] [ 6848] 1000 6848 40672 400 80 320 0 86016 120 200 gcr-ssh-agent [2233107.974592] [ 6870] 1000 6870 100693 640 320 320 0 135168 280 200 indicator-appli [2233107.974595] [ 6871] 1000 6871 98429 560 160 400 0 114688 400 200 indicator-bluet [2233107.974597] [ 6872] 1000 6872 255234 683 323 360 0 270336 920 200 indicator-datet [2233107.974600] [ 6873] 1000 6873 134984 412 80 332 0 225280 2120 200 indicator-keybo [2233107.974602] [ 6874] 1000 6874 117865 2166 1880 286 0 217088 10520 200 indicator-power [2233107.974605] [ 6875] 1000 6875 99076 536 114 422 0 212992 1840 200 indicator-print [2233107.974607] [ 6876] 1000 6876 219603 506 240 266 0 180224 80 200 indicator-sessi [2233107.974609] [ 6877] 1000 6877 152660 400 160 240 0 155648 440 200 indicator-sound [2233107.974612] [ 6882] 1000 6882 559640 2182 1502 320 360 815104 16579 200 unity-settings- [2233107.974614] [ 6887] 1000 6887 35785 200 40 160 0 131072 160 200 window-stack-br [2233107.974617] [ 6919] 1000 6919 76747 440 0 440 0 159744 360 200 gnome-session-b [2233107.974619] [ 6931] 1000 6931 320441 360 0 360 0 372736 2200 200 evolution-sourc [2233107.974622] [ 6996] 1000 6996 138974 360 160 200 0 258048 760 200 goa-daemon [2233107.974624] [ 7011] 1000 7011 360134 440 200 240 0 307200 960 200 evolution-calen [2233107.974627] [ 7015] 1000 7015 99469 360 0 360 0 131072 280 200 goa-identity-se [2233107.974629] [ 7043] 1000 7043 227066 400 40 360 0 294912 960 200 evolution-addre [2233107.974631] [ 7078] 1000 7078 142202 3210 2822 388 0 413696 16440 200 notify-osd [2233107.974634] [ 7129] 1000 7129 57793 680 320 360 0 81920 0 200 dconf-service [2233107.974636] [ 7145] 1000 7145 227522 15175 14826 349 0 544768 17440 200 unity-panel-ser [2233107.974639] [ 7164] 1000 7164 25064 360 0 360 0 90112 80 200 gnome-session-c [2233107.974641] [ 7168] 1000 7168 150938 680 320 360 0 200704 520 200 gnome-session-b [2233107.974644] [ 7292] 1000 7292 256416 1318 940 378 0 278528 2176 200 tracker-miner-f [2233107.974646] [ 7310] 1000 7310 505753 4291 3839 452 0 585728 23520 200 diodon [2233107.974648] [ 7316] 1000 7316 191665 727 295 432 0 274432 2160 200 polkit-gnome-au [2233107.974668] [ 7325] 1000 7325 79744 360 0 360 0 114688 120 200 agent [2233107.974671] [ 7328] 1000 7328 234594 4322 3985 337 0 335872 2320 200 nm-applet [2233107.974673] [ 7338] 1000 7338 169121 756 396 360 0 499712 29840 200 blueman-applet [2233107.974676] [ 7347] 1000 7347 546094 3223 2955 268 0 1167360 53760 200 gnome-software [2233107.974678] [ 7350] 1000 7350 470862 520 200 320 0 331776 840 200 zeitgeist-datah [2233107.974680] [ 7363] 1000 7363 208202 467 107 360 0 360448 4040 200 evolution-alarm [2233107.974683] [ 7369] 1000 7369 802203 1777 1378 399 0 917504 8800 200 flameshot [2233107.974685] [ 7372] 1000 7372 134207 1281 906 375 0 217088 1120 200 indicator-multi [2233107.974688] [ 7424] 1000 7424 117955 589 309 280 0 143360 1120 200 zeitgeist-daemo [2233107.974690] [ 7428] 1000 7428 136151 520 160 360 0 143360 360 200 gvfsd-trash [2233107.974692] [ 7448] 1000 7448 118233 800 400 400 0 139264 360 200 gvfs-udisks2-vo [2233107.974695] [ 7462] 1000 7462 99523 200 0 200 0 126976 360 200 gvfs-afc-volume [2233107.974697] [ 7473] 1000 7473 88602 803 410 393 0 163840 1520 200 zeitgeist-fts [2233107.974699] [ 7483] 1000 7483 79965 320 40 280 0 110592 240 200 gvfs-gphoto2-vo [2233107.974702] [ 7536] 1000 7536 79845 440 80 360 0 106496 200 200 gvfs-mtp-volume [2233107.974704] [ 7553] 1000 7553 79622 360 120 240 0 110592 40 200 gvfs-goa-volume [2233107.974706] [ 7699] 1000 7699 293337 1057 619 358 80 319488 3320 200 nemo-desktop [2233107.974709] [ 7702] 1000 7702 138937 445 67 378 0 258048 4240 200 python3 [2233107.974711] [ 7724] 1000 7724 207481 1382 1014 368 0 385024 4560 200 gnome-terminal- [2233107.974714] [ 7736] 1000 7736 12281 320 40 280 0 86016 120 200 obexd [2233107.974716] [ 7738] 1000 7738 119373 350 30 320 0 229376 3680 200 blueman-tray [2233107.974719] [ 8004] 1000 8004 61514 646 400 246 0 102400 0 200 gvfsd-metadata [2233107.974721] [ 8478] 1000 8478 6550 377 97 280 0 77824 640 200 zsh [2233107.974724] [ 8534] 1000 8534 6394 556 156 400 0 77824 440 200 zsh [2233107.974726] [ 8587] 1000 8587 99412 298 18 280 0 126976 400 200 gvfsd-recent [2233107.974728] [ 8932] 1000 8932 201062 12630 12230 400 0 483328 18960 200 hud-service [2233107.974731] [ 10583] 1000 10583 2483919 7560 7216 344 0 2879488 171800 200 megasync [2233107.974734] [ 10587] 1000 10587 153389 921 600 321 0 221184 1400 200 update-notifier [2233107.974737] [ 11570] 1000 11570 6697 535 175 360 0 90112 800 200 zsh [2233107.974739] [ 11589] 1000 11589 199406 516 196 320 0 221184 1400 200 unity-scope-hom [2233107.974742] [ 11601] 1000 11601 514946 436 160 276 0 339968 2633 200 unity-files-dae [2233107.974744] [ 11603] 1000 11603 168756 814 374 360 80 225280 3127 200 unity-scope-loa [2233107.974746] [ 21249] 1000 21249 2108 520 160 360 0 65536 80 200 ssh-agent [2233107.974749] [ 26676] 1000 26676 117863 240 40 200 0 131072 200 200 gvfsd-network [2233107.974751] [ 26686] 1000 26686 99826 320 40 280 0 135168 120 200 gvfsd-dnssd [2233107.974754] [ 265144] 0 265144 135938 624 280 344 0 155648 840 0 udisksd [2233107.974758] [ 657685] 1000 657685 82623 640 240 400 0 139264 520 200 gvfsd-http [2233107.974760] [2749581] 0 2749581 309235 1199 1079 120 0 122880 560 0 canonical-livep [2233107.974763] [3022740] 1000 3022740 1858674 4686 4302 384 0 2342912 90360 200 WinBox [2233107.974766] [3382235] 1000 3382235 170010 727 407 320 0 692224 54320 200 mega-desktop-ap [2233107.974769] [4103583] 1000 4103583 178749 2075 1682 393 0 303104 6600 200 bamfdaemon [2233107.974771] [ 357478] 1000 357478 6520 400 80 320 0 81920 200 200 ssh [2233107.974774] [ 955713] 0 955713 331247 14906 14866 40 0 372736 3520 0 tailscaled [2233107.974777] [1181017] 0 1181017 3422 360 80 280 0 69632 120 0 bluetoothd [2233107.974780] [1181862] 0 1181862 715488 3271 3071 200 0 491520 2916 -500 dockerd [2233107.974782] [1182122] 0 1182122 309526 999 879 120 0 118784 160 -998 containerd-shim [2233107.974785] [1182144] 999 1182144 54887 600 80 200 320 163840 400 0 postgres [2233107.974787] [1182218] 0 1182218 417927 440 160 280 0 147456 80 -500 docker-proxy [2233107.974790] [1182225] 0 1182225 436360 280 80 200 0 163840 160 -500 docker-proxy [2233107.974792] [1182293] 999 1182293 54917 683 203 240 240 147456 360 0 postgres [2233107.974795] [1182294] 999 1182294 54921 483 203 240 40 139264 360 0 postgres [2233107.974797] [1182296] 999 1182296 54887 683 243 160 280 139264 320 0 postgres [2233107.974800] [1182297] 999 1182297 55282 563 203 160 200 151552 400 0 postgres [2233107.974802] [1182298] 999 1182298 55278 563 163 280 120 139264 440 0 postgres [2233107.974804] [1182947] 0 1182947 2368 240 0 240 0 61440 40 0 xinetd [2233107.974807] [1184298] 0 1184298 1471841 12353 11913 440 0 1060864 3450 0 nordvpnd [2233107.974810] [1184418] 1000 1184418 568674 1550 1310 240 0 270336 390 0 norduserd [2233107.974812] [1201146] 0 1201146 151660 1287 1019 268 0 487424 1280 0 fwupd [2233107.974814] [1209399] 1000 1209399 6491 431 151 280 0 86016 400 200 zsh [2233107.974817] [1911498] 1000 1911498 4661 360 40 320 0 69632 40 200 brave-browser-s [2233107.974819] [1911504] 1000 1911504 4284 320 0 320 0 57344 0 200 cat [2233107.974822] [1911505] 1000 1911505 4284 280 0 280 0 57344 0 200 cat [2233107.974824] [1911506] 1000 1911506 8870609 134183 129555 354 4274 5836800 87480 200 brave [2233107.974827] [1911508] 1000 1911508 8394401 440 80 360 0 69632 0 200 chrome_crashpad [2233107.974830] [1911510] 1000 1911510 8392092 360 40 320 0 65536 40 200 chrome_crashpad [2233107.974832] [1911516] 1000 1911516 8566508 720 360 360 0 598016 3440 200 brave [2233107.974835] [1911517] 1000 1911517 8566505 1680 1200 480 0 593920 2560 200 brave [2233107.974837] [1911519] 1000 1911519 8566511 1511 1231 280 0 274432 2520 200 brave [2233107.974840] [1911588] 1000 1911588 8843470 71076 27219 197 43660 3092480 19709 200 brave [2233107.974842] [1911590] 1000 1911590 8551580 16772 16309 160 303 1499136 5434 200 brave [2233107.974845] [1911603] 1000 1911603 8586478 4788 4251 440 97 716800 3691 200 brave [2233107.974847] [1911612] 1000 1911612 8495557 753 313 440 0 655360 3680 200 brave [2233107.974850] [1911716] 1000 1911716 321442526 160064 159309 440 315 3694592 20966 300 brave [2233107.974853] [1911863] 1000 1911863 321391995 1745 1225 320 200 794624 4520 300 brave [2233107.974855] [1911917] 1000 1911917 320990792 6371 5738 440 193 1150976 10109 300 brave [2233107.974858] [1911926] 1000 1911926 320964059 1569 1097 360 112 786432 4480 300 brave [2233107.974860] [1911938] 1000 1911938 320978418 2220 1628 400 192 839680 6639 300 brave [2233107.974863] [1911948] 1000 1911948 321429164 18459 17688 440 331 1486848 9120 300 brave [2233107.974865] [1911957] 1000 1911957 320968189 1867 1187 440 240 806912 4798 300 brave [2233107.974868] [1912025] 1000 1912025 85666 400 0 400 0 155648 2360 200 gnome-browser-c [2233107.974870] [1912188] 1000 1912188 8525311 823 415 280 128 712704 3880 200 brave [2233107.974873] [1914324] 1000 1914324 321005415 3632 3052 360 220 1220608 13742 300 brave [2233107.974875] [1914330] 1000 1914330 321025911 15490 14491 440 559 2318336 57795 300 brave [2233107.974878] [2085370] 1000 2085370 320977450 3509 2833 400 276 1064960 10200 300 brave [2233107.974880] [2085554] 1000 2085554 320990775 2192 1609 400 183 987136 6856 300 brave [2233107.974882] [2085584] 1000 2085584 321432316 55126 54449 440 237 1814528 10457 300 brave [2233107.974885] [2085585] 1000 2085585 321435038 114979 114430 440 109 2351104 8379 300 brave [2233107.974887] [2085859] 1000 2085859 321437981 138287 136950 320 1017 3670016 10144 300 brave [2233107.974890] [2086289] 1000 2086289 1227813 8424 8237 184 3 1429504 21200 200 compiz [2233107.974892] [2088020] 1000 2088020 321004272 3903 3212 440 251 1249280 13492 300 brave [2233107.974895] [2088951] 1000 2088951 321005938 34610 33751 400 459 3846144 247082 300 brave [2233107.974897] [2089578] 1000 2089578 364971210 83631 83045 383 203 4390912 283368 200 ferdium [2233107.974899] [2089587] 1000 2089587 8522228 560 160 400 0 385024 2080 200 ferdium [2233107.974902] [2089597] 1000 2089597 687 240 0 240 0 45056 0 200 chrome-sandbox [2233107.974904] [2089598] 1000 2089598 8522225 440 80 360 0 385024 2200 200 ferdium [2233107.974907] [2089668] 1000 2089668 8522228 413 93 320 0 225280 2240 200 ferdium [2233107.974909] [2089704] 1000 2089704 8660204 14252 13573 342 337 1732608 23671 200 ferdium [2233107.974912] [2089813] 1000 2089813 8506826 15054 14557 320 177 888832 5626 200 ferdium [2233107.974914] [2089840] 1000 2089840 364973175 66204 65652 280 272 1630208 22483 200 ferdium [2233107.974916] [2090077] 1000 2090077 364975694 136700 136288 360 52 3330048 40963 200 ferdium [2233107.974919] [2090093] 1000 2090093 367971740 27155 26782 360 13 2088960 30623 200 ferdium [2233107.974921] [2090112] 1000 2090112 364975404 21997 21637 360 0 1642496 18510 200 ferdium [2233107.974924] [2090125] 1000 2090125 364975019 35580 35219 320 41 1835008 25939 200 ferdium [2233107.974926] [2090160] 1000 2090160 364967475 17598 17358 240 0 2052096 44184 200 ferdium [2233107.974928] [2090176] 1000 2090176 365828599 4061 3661 400 0 1421312 31047 200 ferdium [2233107.974931] [2090188] 1000 2090188 364961223 3833 3513 320 0 1351680 31235 200 ferdium [2233107.974933] [2090218] 1000 2090218 364964293 1707 1427 280 0 1187840 22231 200 ferdium [2233107.974935] [2090224] 1000 2090224 364969947 46216 45539 400 277 1982464 27338 200 ferdium [2233107.974938] [2090240] 1000 2090240 364964293 1902 1542 360 0 1171456 21775 200 ferdium [2233107.974940] [2090256] 1000 2090256 364964293 1944 1544 400 0 1183744 21876 200 ferdium [2233107.974942] [2090288] 1000 2090288 364965082 13679 13118 320 241 1572864 20007 200 ferdium [2233107.974945] [2090302] 1000 2090302 364976216 2122 1962 160 0 1277952 23599 200 ferdium [2233107.974947] [2090318] 1000 2090318 365842503 46156 45749 360 47 2674688 71252 200 ferdium [2233107.974949] [2090386] 1000 2090386 364959027 14224 13984 240 0 1236992 23229 200 ferdium [2233107.974951] [2090388] 1000 2090388 364979132 4918 4478 440 0 1372160 29120 200 ferdium [2233107.974954] [2090432] 1000 2090432 365854638 231507 229988 280 1239 5320704 66309 200 ferdium [2233107.974956] [2090458] 1000 2090458 365392404 13742 12978 440 324 1425408 21560 200 ferdium [2233107.974959] [2090498] 1000 2090498 8492822 412 132 280 0 507904 2240 200 ferdium [2233107.974961] [2090746] 1000 2090746 364936052 691 291 400 0 696320 3640 300 ferdium [2233107.974964] [2090770] 1000 2090770 364944510 680 240 400 40 770048 4440 300 ferdium [2233107.974966] [2098235] 1000 2098235 459315 22007 21693 314 0 1134592 33480 200 WinBox [2233107.974969] [2102107] 1000 2102107 321005705 5917 5375 440 102 3653632 33102 300 brave [2233107.974971] [2133752] 1000 2133752 8497655 710 321 389 0 667648 3720 200 brave [2233107.974974] [2140518] 1000 2140518 359529 5965 5575 350 40 446464 8489 200 nemo [2233107.974976] [2222550] 1000 2222550 321004335 2713 1965 520 228 1429504 9510 300 brave [2233107.974978] [2222753] 1000 2222753 321007785 7733 6971 440 322 1122304 3793 300 brave [2233107.974981] [2396029] 1000 2396029 6645 596 196 400 0 81920 720 200 zsh [2233107.974983] [2422950] 1000 2422950 6574 520 200 320 0 81920 160 200 ssh [2233107.974985] [2461910] 1000 2461910 321002786 15379 14741 320 318 1622016 7902 300 brave [2233107.974988] [2475776] 1000 2475776 321419367 5078 3958 480 640 1130496 7543 300 brave [2233107.974990] [2477653] 1000 2477653 320994942 11577 10883 400 294 1183744 3868 300 brave [2233107.974993] [2477730] 1000 2477730 321876210 234621 233908 160 553 8073216 112901 300 brave [2233107.974995] [2488050] 1000 2488050 321010888 12732 12151 320 261 2183168 32644 300 brave [2233107.974998] [2693866] 1000 2693866 321000096 12935 12194 400 341 1220608 9772 300 brave [2233107.975000] [2719686] 1000 2719686 320964141 1941 1423 360 158 806912 4675 300 brave [2233107.975002] [2720889] 1000 2720889 321000650 10759 9963 360 436 1097728 5197 300 brave [2233107.975005] [2720907] 1000 2720907 321406774 3105 2700 360 45 1150976 21607 300 brave [2233107.975007] [2791121] 1000 2791121 321025803 95136 94380 200 556 6062080 39891 300 brave [2233107.975009] [2813125] 1000 2813125 534003 1398 1238 160 0 266240 960 200 snap [2233107.975012] [3328431] 1000 3328431 139474 800 440 360 0 262144 1320 200 kactivitymanage [2233107.975014] [3328438] 1000 3328438 60999 480 120 360 0 188416 920 200 kglobalaccel5 [2233107.975017] [3328502] 1000 3328502 143222 676 240 436 0 294912 3320 200 kded5 [2233107.975020] [3336805] 1000 3336805 320978484 2062 1542 360 160 835584 4575 300 brave [2233107.975022] [3337077] 1000 3337077 321406758 2965 2600 360 5 1675264 73940 300 brave [2233107.975024] [3373475] 0 3373475 6308 353 33 320 0 57344 120 0 xrdp-sesman [2233107.975027] [3373487] 127 3373487 6096 329 89 240 0 65536 80 0 xrdp [2233107.975029] [3373699] 1000 3373699 215465 567 171 356 40 638976 25960 200 update-manager [2233107.975032] [3904988] 1000 3904988 4661 360 0 360 0 65536 40 200 bash [2233107.975034] [3904992] 1000 3904992 279694 1343 921 390 32 483328 7640 200 remmina [2233107.975037] [ 25641] 1000 25641 321434761 3711 2940 320 451 1732608 14139 300 brave [2233107.975039] [ 26855] 1000 26855 322301022 108434 107853 200 381 4403200 45412 300 brave [2233107.975042] [ 27028] 1000 27028 321006344 19506 18675 400 431 3018752 75982 300 brave [2233107.975044] [ 27537] 1000 27537 321006689 68487 67734 400 353 2215936 22375 300 brave [2233107.975047] [ 27679] 1000 27679 321014371 31261 30123 400 738 3211264 66470 300 brave [2233107.975049] [ 47048] 1000 47048 386751 1885 1492 393 0 598016 15640 200 atril [2233107.975052] [ 47056] 1000 47056 57530 520 40 480 0 86016 80 200 atrild [2233107.975054] [ 61669] 1000 61669 321000713 5392 4603 360 429 1179648 13139 300 brave [2233107.975056] [ 61867] 1000 61867 321007478 9441 8722 360 359 1683456 20552 300 brave [2233107.975059] [ 274439] 1000 274439 364929385 3460 2770 490 200 1232896 28240 200 joplin [2233107.975062] [ 274444] 1000 274444 3002 300 140 160 0 61440 0 200 Joplin.AppImage [2233107.975064] [ 274448] 1000 274448 8521863 800 360 440 0 397312 2000 200 joplin [2233107.975067] [ 274449] 1000 274449 8521859 720 240 480 0 380928 2080 200 joplin [2233107.975069] [ 274505] 1000 274505 8647575 1761 1399 362 0 1052672 10080 200 joplin [2233107.975072] [ 274511] 1000 274511 8474879 760 400 360 0 475136 2160 200 joplin [2233107.975074] [ 274550] 1000 274550 364971035 5783 5251 320 212 1490944 42557 200 joplin [2233107.975076] [ 274602] 1000 274602 364947919 1906 1529 360 17 925696 16680 200 joplin [2233107.975079] [ 274607] 1000 274607 364954066 669 349 320 0 913408 15360 200 joplin [2233107.975081] [ 302387] 1000 302387 321415368 5425 4786 360 279 954368 5110 300 brave [2233107.975084] [ 318322] 1000 318322 321015603 6407 5800 320 287 2478080 49635 300 brave [2233107.975086] [ 328083] 1000 328083 321000813 6533 5657 400 476 3366912 33272 300 brave [2233107.975088] [ 331456] 1000 331456 321021963 54589 53586 360 643 2527232 23145 300 brave [2233107.975091] [ 348923] 1000 348923 321005026 17293 16595 360 338 1949696 38468 300 brave [2233107.975093] [ 446742] 33 446742 499969 332 52 280 0 286720 372 0 apache2 [2233107.975096] [ 446743] 33 446743 499969 452 172 280 0 286720 292 0 apache2 [2233107.975099] [ 446804] 0 446804 11974 800 400 400 0 118784 240 0 cupsd [2233107.975101] [ 446808] 7 446808 4208 560 200 360 0 73728 0 0 dbus [2233107.975103] [ 446809] 116 446809 88042 760 400 360 0 180224 1080 0 cups-browsed [2233107.975106] [ 446824] 997 446824 4640 471 191 280 0 73728 407 0 apache2 [2233107.975109] [ 446825] 997 446825 79927 10519 10159 360 0 610304 39886 0 apache2 [2233107.975111] [ 446841] 7 446841 4208 400 80 320 0 73728 120 0 dbus [2233107.975114] [ 446946] 997 446946 79885 10562 10082 480 0 610304 39966 0 apache2 [2233107.975117] [ 572794] 1000 572794 320966416 2153 1609 320 224 806912 4200 300 brave [2233107.975119] [ 577352] 1000 577352 321398928 3065 2345 440 280 851968 3917 300 brave [2233107.975122] [ 584016] 1000 584016 321425084 11838 11257 360 221 1208320 10240 300 brave [2233107.975124] [ 589630] 1000 589630 320964173 2187 1587 360 240 806912 3960 300 brave [2233107.975127] [ 589762] 1000 589762 321410888 6832 6304 360 168 1003520 5560 300 brave [2233107.975130] [ 590842] 1000 590842 320996391 8688 7653 320 715 1146880 8399 300 brave [2233107.975132] [ 591650] 1000 591650 321009643 34831 33183 440 1208 1798144 2679 300 brave [2233107.975135] [ 591730] 1000 591730 320997189 7289 6619 360 310 974848 2680 300 brave [2233107.975137] [ 592213] 1000 592213 321003757 30361 28742 280 1339 1658880 2680 300 brave [2233107.975140] [ 595010] 1000 595010 321000021 14843 13552 320 971 1196032 2680 300 brave [2233107.975143] [ 595072] 1000 595072 320991069 8645 7959 400 286 1048576 2680 300 brave [2233107.975145] [ 596650] 1000 596650 321392781 3739 3059 440 240 831488 2720 300 brave [2233107.975148] [ 596651] 1000 596651 321396879 3978 3178 400 400 851968 2718 300 brave [2233107.975150] [ 596652] 1000 596652 321389946 3300 2700 360 240 782336 2678 300 brave [2233107.975152] [ 596663] 1000 596663 321389946 3471 2791 440 240 794624 2680 300 brave [2233107.975155] [ 596666] 1000 596666 321389946 3405 2765 400 240 794624 2720 300 brave [2233107.975157] [ 596674] 1000 596674 321405139 5339 4739 320 280 880640 2680 300 brave [2233107.975159] [ 596730] 1000 596730 16965722 1513 1193 320 0 552960 2715 200 brave [2233107.975162] [ 596739] 1000 596739 321094074 138399 48004 240 90155 2224128 2640 300 brave [2233107.975164] [ 596751] 1000 596751 321389946 3835 3148 440 247 806912 2680 300 brave [2233107.975167] [ 596757] 1000 596757 320961913 2916 2276 400 240 700416 2680 300 brave [2233107.975169] [ 596771] 1000 596771 321389962 3388 2868 280 240 790528 2720 300 brave [2233107.975171] [ 596772] 1000 596772 321389946 3380 2860 280 240 790528 2680 300 brave [2233107.975174] [ 596803] 1000 596803 321389946 3430 2870 320 240 786432 2680 300 brave [2233107.975176] [ 596968] 0 596968 4345 200 0 200 0 53248 0 0 sleep [2233107.975179] [ 597073] 0 597073 5212 400 120 280 0 69632 0 0 cron [2233107.975181] [ 597078] 997 597078 13482 3680 3640 40 0 131072 0 0 python3 [2233107.975184] [ 597108] 997 597108 79870 29321 29001 320 0 569344 21115 0 cmk-job [2233107.975186] [ 597115] 997 597115 79927 29444 29124 320 0 569344 21001 0 cmk-job [2233107.975188] [ 597117] 997 597117 79927 29446 29126 320 0 569344 20999 0 cmk-job [2233107.975191] [ 597119] 997 597119 79927 29127 28847 280 0 569344 21278 0 cmk-job [2233107.975193] [ 597121] 997 597121 79927 26132 25852 280 0 569344 24273 0 cmk-job [2233107.975195] [ 597123] 997 597123 79927 19857 19537 320 0 569344 30588 0 cmk-job [2233107.975198] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=user.slice,mems_allowed=0,global_oom,task_memcg=/user.slice/user-XXXX.slice/user@1000.service/app.slice/app-gnome-ferdium-7361.scope,task=brave,pid=2477730,uid=1000 [2233107.975301] Out of memory: Killed process 2477730 (brave) total-vm:1287504840kB, anon-rss:935632kB, file-rss:640kB, shmem-rss:2212kB, UID:1000 pgtables:7884kB oom_score_adj:300 [2233164.816724] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233169.209697] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233179.628755] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233195.391599] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233204.123658] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2233223.303859] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2234152.411558] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2239338.459114] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2240366.853509] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2240370.039512] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2247567.003154] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2247570.311092] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2254767.173213] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2254770.500529] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2261596.590276] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2261967.381201] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2261970.628333] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2269167.597349] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2269170.757559] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2274709.822321] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2274716.018201] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2274726.477289] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2276368.029129] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2277352.722261] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2282538.673088] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2283570.005658] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2283760.347638] usb 3-3.1: USB disconnect, device number 70 [2283809.929536] usb 3-3.1: new high-speed USB device number 72 using xhci_hcd [2283810.019973] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 5.10 [2283810.019986] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2283810.019990] usb 3-3.1: Product: Pixel Tablet [2283810.019994] usb 3-3.1: Manufacturer: Google [2283810.019996] usb 3-3.1: SerialNumber: ... [2283812.827578] usb 3-3.1: USB disconnect, device number 72 [2283813.779609] usb 3-3.1: new high-speed USB device number 73 using xhci_hcd [2283813.869001] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 5.10 [2283813.869016] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2283813.869021] usb 3-3.1: Product: Pixel Tablet [2283813.869025] usb 3-3.1: Manufacturer: Google [2283813.869028] usb 3-3.1: SerialNumber: ... [2286508.565041] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2286523.811052] usb 3-6: USB disconnect, device number 71 [2286524.060813] usb 3-6: new high-speed USB device number 74 using xhci_hcd [2286524.188971] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [2286524.188985] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2286524.188989] usb 3-6: Product: ETU905A88-E [2286524.188992] usb 3-6: Manufacturer: EGIS [2286524.188995] usb 3-6: SerialNumber: ... [2290772.987355] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2297975.968214] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2304796.732212] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2305178.951179] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2309403.717326] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2312236.359519] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2315854.562670] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2317910.038510] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2317916.230512] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2317926.639556] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2318176.382427] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2318182.358477] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2319568.185630] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2319580.492769] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2320552.943784] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2322376.516401] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe B (start=1586213 end=1586214) time 199 us, min 1066, max 1079, scanline start 1055, end 1057 [2325738.832314] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2326780.731079] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2329152.450212] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2330501.252868] PM: Image not found (code -16) [2330970.962894] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2330977.395928] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2331527.227314] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2331700.880783] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2333980.995722] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2335124.699380] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2335130.708452] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2335913.520127] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2336000.992853] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2341181.211708] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2347996.901197] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2348381.469988] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353562.742044] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353573.235091] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353592.048899] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353669.018631] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353696.919566] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353723.361514] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353864.441076] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2353960.210866] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354002.767772] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354134.675445] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354176.887341] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354183.957406] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354198.505336] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354256.100092] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354274.908383] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354278.945054] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354367.130853] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354487.637562] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354613.485161] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354640.265419] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2354729.497839] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2355030.356898] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2355331.924003] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2355581.648240] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2355632.340041] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2355933.570273] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2356234.318572] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2356535.262660] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2356836.061861] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2357137.116078] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2357438.208353] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2357739.569497] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2358040.218729] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2358341.300969] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2358642.392329] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2358943.028351] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2359244.021585] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2359543.885908] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2360143.912416] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2361110.126018] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2361116.426209] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2361126.827067] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2362781.880679] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2363744.070554] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2363753.133252] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2366144.191790] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2367344.336559] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2369982.137976] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2370944.474912] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2372352.746631] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2372908.927916] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2372924.160900] usb 3-6: USB disconnect, device number 74 [2372924.411729] usb 3-6: new high-speed USB device number 75 using xhci_hcd [2372924.540038] usb 3-6: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67 [2372924.540056] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [2372924.540061] usb 3-6: Product: ETU905A88-E [2372924.540065] usb 3-6: Manufacturer: EGIS [2372924.540068] usb 3-6: SerialNumber: ... [2374544.606115] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2377182.372385] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2378144.740097] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2382344.872547] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2384382.607178] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2385345.055925] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2388945.221830] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2391196.985852] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2391582.812822] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2392545.376477] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2396145.822531] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2396278.681066] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2396430.523502] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2396743.004669] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2397803.261750] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2398783.063681] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2399138.188242] mmap: ThreadPoolForeg (926614): VmData 8590168064 exceed data ulimit 8589934592. Update limits or use boot option ignore_rlimit_data. [2399139.214109] traps: brave[926515] trap invalid opcode ip:6496000ed956 sp:7ffe3179d540 error:0 in brave (deleted)[6495f7f6b000+d6f7000] [2399428.902336] bamfdaemon[4103583]: segfault at 30 ip 00007c44a2af661a sp 00007ffde50ef820 error 4 in libgobject-2.0.so.0.8000.0[7c44a2ae1000+37000] likely on CPU 14 (core 26, socket 0) [2399428.902355] Code: 31 d2 4c 89 e7 e8 36 b3 fe ff 48 89 df e8 3e fc 00 00 8b 35 f0 da 03 00 31 c9 31 d2 4c 89 e7 e8 1c b3 fe ff 48 8b 03 48 89 df <ff> 50 30 48 89 df e8 db 57 01 00 e9 7e fe ff ff 66 0f 1f 44 00 00 [2399796.234528] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2399799.784547] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2400134.248246] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2401979.493461] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2404310.301765] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2404316.633003] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2404326.935921] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2405983.400815] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2406953.357965] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2413183.652264] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2415552.955350] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2420383.905633] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2427584.152910] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2431448.134076] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2434397.157846] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2434785.601409] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2441988.584878] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2443000.113295] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2447510.426654] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2447516.907570] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2447527.104810] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2449189.883445] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2450153.608133] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd [2456391.546748] usb 3-3.3.1: reset high-speed USB device number 31 using xhci_hcd