[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 5.10.74-generic-2rosa2021.1-x86_64 (XXX@XXX) (gcc (GCC) 11.2.0 20210728 (ROSA), GNU ld (GNU Binutils) 2.37) #1 SMP Tue Oct 19 20:58:36 UTC 2021 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.74-generic-2rosa2021.1-x86_64 root=UUID=HASH_220-124B-99C7-B350-98DD7A19C9BB ro rhgb quiet selinux=0 splash=silent logo.nologo quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd6bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfd6c000-0x00000000bfdbefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfe81fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfe82000-0x00000000bfebefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfeebfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfeec000-0x00000000bfefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfeff000-0x00000000bfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Acer Aspire 5732Z /Aspire 5732Z , BIOS V3.10 11/04/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.302 MHz processor [ 0.001335] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001340] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001350] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 [ 0.001358] MTRR default type: uncachable [ 0.001360] MTRR fixed ranges enabled: [ 0.001362] 00000-9FFFF write-back [ 0.001363] A0000-BFFFF uncachable [ 0.001365] C0000-DFFFF write-protect [ 0.001366] E0000-EFFFF uncachable [ 0.001368] F0000-FFFFF write-protect [ 0.001369] MTRR variable ranges enabled: [ 0.001372] 0 base 0FFF00000 mask FFFF00000 write-protect [ 0.001374] 1 base 0FFFC0000 mask FFFFE0000 uncachable [ 0.001375] 2 base 000000000 mask F80000000 write-back [ 0.001377] 3 base 080000000 mask FC0000000 write-back [ 0.001379] 4 base 0BFF00000 mask FFFF00000 uncachable [ 0.001381] 5 base 100000000 mask F80000000 write-back [ 0.001383] 6 base 180000000 mask FC0000000 write-back [ 0.001384] 7 disabled [ 0.002045] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002289] last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.018056] check: Scanning 1 areas for low memory corruption [ 0.018735] RAMDISK: [mem 0x2ed92000-0x336c0fff] [ 0.018744] ACPI: Early table checksum verification disabled [ 0.018750] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.018757] ACPI: XSDT 0x00000000BFEFE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.018767] ACPI: FACP 0x00000000BFEFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018776] ACPI: DSDT 0x00000000BFEEE000 0098CE (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018781] ACPI: FACS 0x00000000BFE8F000 000040 [ 0.018786] ACPI: FACS 0x00000000BFE8F000 000040 [ 0.018791] ACPI: HPET 0x00000000BFEFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018796] ACPI: APIC 0x00000000BFEFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018802] ACPI: MCFG 0x00000000BFEFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018807] ACPI: ASF! 0x00000000BFEF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018813] ACPI: SLIC 0x00000000BFEF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018819] ACPI: BOOT 0x00000000BFEED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018824] ACPI: SSDT 0x00000000BFEEC000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.018829] ACPI: Reserving FACP table memory at [mem 0xbfefd000-0xbfefd0f3] [ 0.018831] ACPI: Reserving DSDT table memory at [mem 0xbfeee000-0xbfef78cd] [ 0.018832] ACPI: Reserving FACS table memory at [mem 0xbfe8f000-0xbfe8f03f] [ 0.018834] ACPI: Reserving FACS table memory at [mem 0xbfe8f000-0xbfe8f03f] [ 0.018835] ACPI: Reserving HPET table memory at [mem 0xbfefc000-0xbfefc037] [ 0.018837] ACPI: Reserving APIC table memory at [mem 0xbfefb000-0xbfefb06b] [ 0.018838] ACPI: Reserving MCFG table memory at [mem 0xbfefa000-0xbfefa03b] [ 0.018839] ACPI: Reserving ASF! table memory at [mem 0xbfef9000-0xbfef90a4] [ 0.018841] ACPI: Reserving SLIC table memory at [mem 0xbfef8000-0xbfef8175] [ 0.018842] ACPI: Reserving BOOT table memory at [mem 0xbfeed000-0xbfeed027] [ 0.018844] ACPI: Reserving SSDT table memory at [mem 0xbfeec000-0xbfeec654] [ 0.018856] ACPI: Local APIC address 0xfee00000 [ 0.018936] No NUMA configuration found [ 0.018938] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff] [ 0.018954] NODE_DATA(0) allocated [mem 0x1bffd5000-0x1bfffffff] [ 0.019476] cma: Reserved 32 MiB at 0x00000001bdc00000 [ 0.019507] Zone ranges: [ 0.019509] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019511] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019514] Normal [mem 0x0000000100000000-0x00000001bfffffff] [ 0.019516] Device empty [ 0.019518] Movable zone start for each node [ 0.019522] Early memory node ranges [ 0.019523] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.019525] node 0: [mem 0x0000000000100000-0x00000000bfd6bfff] [ 0.019527] node 0: [mem 0x00000000bfdbf000-0x00000000bfe81fff] [ 0.019528] node 0: [mem 0x00000000bfebf000-0x00000000bfeebfff] [ 0.019530] node 0: [mem 0x00000000bfeff000-0x00000000bfefffff] [ 0.019531] node 0: [mem 0x0000000100000000-0x00000001bfffffff] [ 0.019534] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bfffffff] [ 0.019536] On node 0 totalpages: 1572346 [ 0.019538] DMA zone: 64 pages used for memmap [ 0.019539] DMA zone: 21 pages reserved [ 0.019541] DMA zone: 3997 pages, LIFO batch:0 [ 0.019543] DMA32 zone: 12218 pages used for memmap [ 0.019544] DMA32 zone: 781917 pages, LIFO batch:63 [ 0.019545] Normal zone: 12288 pages used for memmap [ 0.019547] Normal zone: 786432 pages, LIFO batch:63 [ 0.019553] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019646] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.045353] On node 0, zone DMA32: 83 pages in unavailable ranges [ 0.045359] On node 0, zone DMA32: 61 pages in unavailable ranges [ 0.045362] On node 0, zone DMA32: 19 pages in unavailable ranges [ 0.071281] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.071525] ACPI: PM-Timer IO Port: 0x408 [ 0.071529] ACPI: Local APIC address 0xfee00000 [ 0.071550] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.071554] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.071557] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.071559] ACPI: IRQ0 used by override. [ 0.071561] ACPI: IRQ9 used by override. [ 0.071564] Using ACPI (MADT) for SMP configuration information [ 0.071566] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.071575] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.071610] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.071613] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.071615] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.071616] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.071618] PM: hibernation: Registered nosave memory: [mem 0xbfd6c000-0xbfdbefff] [ 0.071621] PM: hibernation: Registered nosave memory: [mem 0xbfe82000-0xbfebefff] [ 0.071624] PM: hibernation: Registered nosave memory: [mem 0xbfeec000-0xbfefefff] [ 0.071626] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xbfffffff] [ 0.071627] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.071629] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.071630] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.071631] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.071633] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.071634] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.071635] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.071636] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.071638] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.071639] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.071640] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.071641] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.071642] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffefffff] [ 0.071644] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.071647] [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.071649] Booting paravirtualized kernel on bare hardware [ 0.071654] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.071667] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.073095] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.073107] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.073110] pcpu-alloc: [0] 0 1 2 3 [ 0.073167] Built 1 zonelists, mobility grouping on. Total pages: 1547755 [ 0.073169] Policy zone: Normal [ 0.073172] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.74-generic-2rosa2021.1-x86_64 root=UUID=HASH_220-124B-99C7-B350-98DD7A19C9BB ro rhgb quiet selinux=0 splash=silent logo.nologo quiet [ 0.077073] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.078998] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.079081] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.172084] Memory: 5966780K/6289384K available (16393K kernel code, 3538K rwdata, 5444K rodata, 2648K init, 5940K bss, 289576K reserved, 32768K cma-reserved) [ 0.172100] random: get_random_u64 called from __kmem_cache_create+0x2b/0x530 with crng_init=0 [ 0.172270] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.172293] Kernel/User page tables isolation: enabled [ 0.172331] ftrace: allocating 47668 entries in 187 pages [ 0.196731] ftrace: allocated 187 pages with 6 groups [ 0.196963] rcu: Hierarchical RCU implementation. [ 0.196967] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.196969] Rude variant of Tasks RCU enabled. [ 0.196970] Tracing variant of Tasks RCU enabled. [ 0.196972] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.196973] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.203044] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.205506] Console: colour VGA+ 80x25 [ 0.205533] printk: console [tty0] enabled [ 0.205571] ACPI: Core revision 20200925 [ 0.205712] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.205729] APIC: Switch to symmetric I/O mode setup [ 0.206093] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.222397] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa12c0d2c2, max_idle_ns: 440795213797 ns [ 0.222405] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.46 BogoMIPS (lpj=7314340) [ 0.222410] pid_max: default: 32768 minimum: 301 [ 0.222449] LSM: Security Framework initializing [ 0.222480] LSM support for eBPF active [ 0.222481] AltHa disabled. [ 0.222580] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.222640] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.223082] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.223088] process: using mwait in idle threads [ 0.223093] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.223094] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.223100] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.223102] Spectre V2 : Mitigation: Full generic retpoline [ 0.223104] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.223105] Speculative Store Bypass: Vulnerable [ 0.223109] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.223257] Freeing SMP alternatives memory: 44K [ 0.338610] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.338900] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.338913] ... version: 2 [ 0.338915] ... bit width: 40 [ 0.338916] ... generic registers: 2 [ 0.338917] ... value mask: 000000ffffffffff [ 0.338919] ... max period: 000000007fffffff [ 0.338920] ... fixed-purpose events: 3 [ 0.338921] ... event mask: 0000000700000003 [ 0.339066] rcu: Hierarchical SRCU implementation. [ 0.339066] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.339066] smp: Bringing up secondary CPUs ... [ 0.339066] x86: Booting SMP configuration: [ 0.339066] .... node #0, CPUs: #1 [ 0.345826] smp: Brought up 1 node, 2 CPUs [ 0.345826] smpboot: Max logical packages: 2 [ 0.345826] smpboot: Total of 2 processors activated (8780.92 BogoMIPS) [ 0.347274] devtmpfs: initialized [ 0.347274] x86/mm: Memory block size: 128MB [ 0.349108] PM: Registering ACPI NVS region [mem 0xbfe82000-0xbfebefff] (249856 bytes) [ 0.349188] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.349195] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.349681] pinctrl core: initialized pinctrl subsystem [ 0.349863] PM: RTC time: 14:20:35, date: 2022-04-04 [ 0.350077] NET: Registered protocol family 16 [ 0.350288] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.350288] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.350288] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.350288] thermal_sys: Registered thermal governor 'fair_share' [ 0.350288] thermal_sys: Registered thermal governor 'bang_bang' [ 0.350288] thermal_sys: Registered thermal governor 'step_wise' [ 0.350288] thermal_sys: Registered thermal governor 'user_space' [ 0.350288] EISA bus registered [ 0.350288] cpuidle: using governor ladder [ 0.350288] cpuidle: using governor menu [ 0.350288] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.350288] Simple Boot Flag at 0x44 set to 0x1 [ 0.350288] ACPI: bus type PCI registered [ 0.350288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.350288] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.350288] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.350288] PCI: Using configuration type 1 for base access [ 0.350288] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.350288] mtrr: probably your BIOS does not setup all CPUs. [ 0.350288] mtrr: corrected configuration. [ 0.352994] Kprobes globally optimized [ 0.353005] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.412408] raid6: sse2x4 gen() 8363 MB/s [ 0.469068] raid6: sse2x4 xor() 2142 MB/s [ 0.525736] raid6: sse2x2 gen() 8177 MB/s [ 0.582402] raid6: sse2x2 xor() 5279 MB/s [ 0.639069] raid6: sse2x1 gen() 7019 MB/s [ 0.695735] raid6: sse2x1 xor() 4312 MB/s [ 0.695737] raid6: using algorithm sse2x4 gen() 8363 MB/s [ 0.695738] raid6: .... xor() 2142 MB/s, rmw enabled [ 0.695740] raid6: using ssse3x2 recovery algorithm [ 0.695858] ACPI: Added _OSI(Module Device) [ 0.695860] ACPI: Added _OSI(Processor Device) [ 0.695861] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.695863] ACPI: Added _OSI(Processor Aggregator Device) [ 0.695865] ACPI: Added _OSI(Linux-Dell-Video) [ 0.695866] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.695868] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.702298] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.703604] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.704025] ACPI: Dynamic OEM Table Load: [ 0.704035] ACPI: SSDT 0xFFFF8E558084E400 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.704853] ACPI: Dynamic OEM Table Load: [ 0.704860] ACPI: SSDT 0xFFFF8E5580847000 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.705907] ACPI: Dynamic OEM Table Load: [ 0.705914] ACPI: SSDT 0xFFFF8E5580A3C000 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.706634] ACPI: Dynamic OEM Table Load: [ 0.706640] ACPI: SSDT 0xFFFF8E55809CDA80 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.707566] ACPI: EC: EC started [ 0.707568] ACPI: EC: interrupt blocked [ 0.715815] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.715818] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions [ 0.715820] ACPI: Interpreter enabled [ 0.715856] ACPI: (supports S0 S3 S4 S5) [ 0.715859] ACPI: Using IOAPIC for interrupt routing [ 0.715904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.716200] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.724403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.724413] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.724420] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.724437] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.724981] PCI host bridge to bus 0000:00 [ 0.724984] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.724987] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.724993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.724995] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.724998] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.725016] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.725046] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.725048] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.725166] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.725222] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.725395] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.725452] pci 0000:00:1a.0: reg 0x20: [io 0x60c0-0x60df] [ 0.725642] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.726888] pci 0000:00:1a.7: reg 0x10: [mem 0xd6304c00-0xd6304fff] [ 0.731822] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.731967] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.731987] pci 0000:00:1b.0: reg 0x10: [mem 0xd6300000-0xd6303fff 64bit] [ 0.732076] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.732462] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.732558] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.732709] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.732804] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.732956] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.733051] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.733208] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.733263] pci 0000:00:1d.0: reg 0x20: [io 0x60a0-0x60bf] [ 0.733444] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.733499] pci 0000:00:1d.1: reg 0x20: [io 0x6080-0x609f] [ 0.733676] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.733731] pci 0000:00:1d.2: reg 0x20: [io 0x6060-0x607f] [ 0.733903] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.733959] pci 0000:00:1d.3: reg 0x20: [io 0x6040-0x605f] [ 0.734137] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.735737] pci 0000:00:1d.7: reg 0x10: [mem 0xd6304800-0xd6304bff] [ 0.740294] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.740434] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.740616] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.740853] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.740868] pci 0000:00:1f.2: reg 0x10: [io 0x60e8-0x60ef] [ 0.740877] pci 0000:00:1f.2: reg 0x14: [io 0x60f4-0x60f7] [ 0.740886] pci 0000:00:1f.2: reg 0x18: [io 0x60e0-0x60e7] [ 0.740894] pci 0000:00:1f.2: reg 0x1c: [io 0x60f0-0x60f3] [ 0.740903] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f] [ 0.740912] pci 0000:00:1f.2: reg 0x24: [mem 0xd6304000-0xd63047ff] [ 0.740961] pci 0000:00:1f.2: PME# supported from D3hot [ 0.741104] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.741124] pci 0000:00:1f.3: reg 0x10: [mem 0xd6305000-0xd63050ff 64bit] [ 0.741147] pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f] [ 0.741323] pci 0000:01:00.0: [1002:9553] type 00 class 0x030000 [ 0.741344] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] [ 0.741355] pci 0000:01:00.0: reg 0x14: [io 0x5000-0x50ff] [ 0.741366] pci 0000:01:00.0: reg 0x18: [mem 0xd6200000-0xd620ffff] [ 0.741406] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.741416] pci 0000:01:00.0: enabling Extended Tags [ 0.741476] pci 0000:01:00.0: supports D1 D2 [ 0.741501] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link) [ 0.741605] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.741608] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.741611] pci 0000:00:01.0: bridge window [mem 0xd6200000-0xd62fffff] [ 0.741616] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.741710] acpiphp: Slot [1] registered [ 0.741716] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.741720] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.741724] pci 0000:00:1c.0: bridge window [mem 0xd5200000-0xd61fffff] [ 0.741730] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.741812] pci 0000:04:00.0: [8086:423c] type 00 class 0x028000 [ 0.741853] pci 0000:04:00.0: reg 0x10: [mem 0xd4100000-0xd4101fff 64bit] [ 0.742044] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.742458] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.742462] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.742466] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd51fffff] [ 0.742472] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.742548] pci 0000:05:00.0: [1969:1062] type 00 class 0x020000 [ 0.742578] pci 0000:05:00.0: reg 0x10: [mem 0xd3000000-0xd303ffff 64bit] [ 0.742591] pci 0000:05:00.0: reg 0x18: [io 0x1000-0x107f] [ 0.742717] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.742838] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.742842] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] [ 0.742845] pci 0000:00:1c.2: bridge window [mem 0xd3000000-0xd40fffff] [ 0.742851] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref] [ 0.742871] pci_bus 0000:06: extended config space not accessible [ 0.742937] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.742947] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.742950] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.742952] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.742954] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.849338] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.849423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.849505] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.849586] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.849667] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.849749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.849830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.849910] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.850741] ACPI: EC: interrupt unblocked [ 0.850744] ACPI: EC: event unblocked [ 0.850749] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.850750] ACPI: EC: GPE=0x1c [ 0.850753] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete [ 0.850756] ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events [ 0.850874] iommu: Default domain type: Translated [ 0.850874] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.850874] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.850874] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.850874] vgaarb: loaded [ 0.850874] SCSI subsystem initialized [ 0.850874] libata version 3.00 loaded. [ 0.850874] ACPI: bus type USB registered [ 0.850874] usbcore: registered new interface driver usbfs [ 0.850874] usbcore: registered new interface driver hub [ 0.850874] usbcore: registered new device driver usb [ 0.850874] pps_core: LinuxPPS API ver. 1 registered [ 0.850874] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.850874] PTP clock support registered [ 0.850874] EDAC MC: Ver: 3.0.0 [ 0.850874] NetLabel: Initializing [ 0.850874] NetLabel: domain hash size = 128 [ 0.850874] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.850874] NetLabel: unlabeled traffic allowed by default [ 0.850874] PCI: Using ACPI for IRQ routing [ 0.850874] PCI: pci_cache_line_size set to 64 bytes [ 0.852447] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.852449] e820: reserve RAM buffer [mem 0xbfd6c000-0xbfffffff] [ 0.852451] e820: reserve RAM buffer [mem 0xbfe82000-0xbfffffff] [ 0.852453] e820: reserve RAM buffer [mem 0xbfeec000-0xbfffffff] [ 0.852454] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff] [ 0.857184] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.857191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.857198] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.859117] clocksource: Switched to clocksource tsc-early [ 0.900838] VFS: Disk quotas dquot_6.6.0 [ 0.900866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.900990] pnp: PnP ACPI init [ 1.005770] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff] [ 1.005855] system 00:00: [io 0x0600-0x060f] has been reserved [ 1.005857] system 00:00: [io 0x0610] has been reserved [ 1.005859] system 00:00: [io 0x0800-0x080f] has been reserved [ 1.005861] system 00:00: [io 0x0810-0x0817] has been reserved [ 1.005864] system 00:00: [io 0x0820-0x0823] has been reserved [ 1.005866] system 00:00: [io 0x0400-0x047f] has been reserved [ 1.005868] system 00:00: [io 0x0500-0x057f] has been reserved [ 1.005871] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 1.005874] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.005877] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.005879] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.005881] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.005884] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.005886] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.005889] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.005891] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.005902] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.005975] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.006069] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.006181] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1d SYN1b00 SYN0002 PNP0f13 (active) [ 1.006366] pnp: PnP ACPI: found 4 devices [ 1.012983] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.013079] NET: Registered protocol family 2 [ 1.013459] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.015770] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.015823] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.016100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.016640] TCP: Hash tables configured (established 65536 bind 65536) [ 1.016925] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 1.016977] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.017053] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.017224] NET: Registered protocol family 1 [ 1.017233] NET: Registered protocol family 44 [ 1.017244] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.017277] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6220000-0xd623ffff pref] [ 1.017280] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.017285] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 1.017289] pci 0000:00:01.0: bridge window [mem 0xd6200000-0xd62fffff] [ 1.017292] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.017297] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.017300] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.017305] pci 0000:00:1c.0: bridge window [mem 0xd5200000-0xd61fffff] [ 1.017309] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 1.017316] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 1.017318] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.017323] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd51fffff] [ 1.017327] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 1.017334] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 1.017337] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] [ 1.017342] pci 0000:00:1c.2: bridge window [mem 0xd3000000-0xd40fffff] [ 1.017345] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref] [ 1.017352] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 1.017364] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.017366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.017368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.017370] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 1.017373] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 1.017374] pci_bus 0000:01: resource 1 [mem 0xd6200000-0xd62fffff] [ 1.017376] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.017378] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 1.017380] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd61fffff] [ 1.017382] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 1.017384] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 1.017386] pci_bus 0000:04: resource 1 [mem 0xd4100000-0xd51fffff] [ 1.017387] pci_bus 0000:04: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref] [ 1.017389] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] [ 1.017391] pci_bus 0000:05: resource 1 [mem 0xd3000000-0xd40fffff] [ 1.017393] pci_bus 0000:05: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref] [ 1.017396] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 1.017397] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 1.017399] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.017401] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff window] [ 1.032406] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6f0 took 14038 usecs [ 1.049056] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6f0 took 14882 usecs [ 1.049084] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.049094] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 1.049100] PCI: CLS 64 bytes, default 64 [ 1.049181] Trying to unpack rootfs image as initramfs... [ 1.813925] Freeing initrd memory: 74940K [ 1.814025] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.814028] software IO TLB: mapped [mem 0x00000000bbd6c000-0x00000000bfd6c000] (64MB) [ 1.814219] check: Scanning for low memory corruption every 60 seconds [ 1.814776] Initialise system trusted keyrings [ 1.814800] Key type blacklist registered [ 1.814899] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.817241] zbud: loaded [ 1.817725] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.818015] fuse: init (API version 7.32) [ 1.818202] integrity: Platform Keyring initialized [ 1.831259] xor: measuring software checksum speed [ 1.832129] prefetch64-sse : 11374 MB/sec [ 1.833145] generic_sse : 9789 MB/sec [ 1.833146] xor: using function: prefetch64-sse (11374 MB/sec) [ 1.833151] Key type asymmetric registered [ 1.833153] Asymmetric key parser 'x509' registered [ 1.833170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.833224] io scheduler mq-deadline registered [ 1.833226] io scheduler kyber registered [ 1.833271] io scheduler bfq registered [ 1.833774] pcieport 0000:00:1c.0: enabling device (0001 -> 0003) [ 1.834519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.834625] intel_idle: MWAIT substates: 0x2220 [ 1.834754] Monitor-Mwait will be used to enter C-1 state [ 1.834762] Monitor-Mwait will be used to enter C-2 state [ 1.834767] ACPI: \_PR_.CPU0: Found 2 idle states [ 1.834769] intel_idle: v0.5.1 model 0x17 [ 1.834884] intel_idle: Local APIC timer is reliable in C1 [ 1.835438] ACPI: AC Adapter [AC] (on-line) [ 1.835530] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input0 [ 1.835566] ACPI: Power Button [PWRB] [ 1.835617] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input1 [ 1.835644] ACPI: Lid Switch [LID0] [ 1.835690] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input2 [ 1.835721] ACPI: Sleep Button [SLPB] [ 1.835808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.835863] ACPI: Power Button [PWRF] [ 1.837747] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.837750] ACPI: Thermal Zone [TZ01] (29 C) [ 1.838434] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.841201] Linux agpgart interface v0.103 [ 1.969103] loop: module loaded [ 1.969490] ahci 0000:00:1f.2: version 3.0 [ 1.969849] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.969874] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.969878] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs [ 1.979682] scsi host0: ahci [ 1.979928] scsi host1: ahci [ 1.980101] scsi host2: ahci [ 1.980274] scsi host3: ahci [ 1.980353] ata1: SATA max UDMA/133 abar m2048@0xd6304000 port 0xd6304100 irq 24 [ 1.980356] ata2: SATA max UDMA/133 abar m2048@0xd6304000 port 0xd6304180 irq 24 [ 1.980358] ata3: DUMMY [ 1.980359] ata4: DUMMY [ 1.980731] libphy: Fixed MDIO Bus: probed [ 1.980733] tun: Universal TUN/TAP device driver, 1.6 [ 1.980825] PPP generic driver version 2.4.2 [ 1.980920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.980928] ehci-pci: EHCI PCI platform driver [ 1.981253] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.981263] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.981279] ehci-pci 0000:00:1a.7: debug port 1 [ 1.985202] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.985228] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd6304c00 [ 1.995745] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.995817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.995819] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.995821] usb usb1: Product: EHCI Host Controller [ 1.995823] usb usb1: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 ehci_hcd [ 1.995825] usb usb1: SerialNumber: ... [ 1.996008] hub 1-0:1.0: USB hub found [ 1.996021] hub 1-0:1.0: 2 ports detected [ 1.996431] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.996438] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.996452] ehci-pci 0000:00:1d.7: debug port 1 [ 2.000348] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.000364] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6304800 [ 2.012411] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.012502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.012505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.012507] usb usb2: Product: EHCI Host Controller [ 2.012509] usb usb2: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 ehci_hcd [ 2.012510] usb usb2: SerialNumber: ... [ 2.012656] hub 2-0:1.0: USB hub found [ 2.012665] hub 2-0:1.0: 8 ports detected [ 2.013002] ehci-platform: EHCI generic platform driver [ 2.013026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.013032] ohci-pci: OHCI PCI platform driver [ 2.013051] ohci-platform: OHCI generic platform driver [ 2.013063] uhci_hcd: USB Universal Host Controller Interface driver [ 2.013314] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.013321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.013330] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.013361] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0 [ 2.013430] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.013433] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.013435] usb usb3: Product: UHCI Host Controller [ 2.013437] usb usb3: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 uhci_hcd [ 2.013438] usb usb3: SerialNumber: ... [ 2.013593] hub 3-0:1.0: USB hub found [ 2.013602] hub 3-0:1.0: 2 ports detected [ 2.013947] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.013954] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.013962] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.013983] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000060a0 [ 2.014050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.014052] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.014054] usb usb4: Product: UHCI Host Controller [ 2.014056] usb usb4: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 uhci_hcd [ 2.014058] usb usb4: SerialNumber: ... [ 2.014203] hub 4-0:1.0: USB hub found [ 2.014212] hub 4-0:1.0: 2 ports detected [ 2.014560] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.014567] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 2.014574] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.014617] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080 [ 2.014691] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.014694] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.014695] usb usb5: Product: UHCI Host Controller [ 2.014697] usb usb5: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 uhci_hcd [ 2.014699] usb usb5: SerialNumber: ... [ 2.014846] hub 5-0:1.0: USB hub found [ 2.014855] hub 5-0:1.0: 2 ports detected [ 2.015203] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.015211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 2.015219] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.015255] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00006060 [ 2.015320] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.015322] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.015324] usb usb6: Product: UHCI Host Controller [ 2.015325] usb usb6: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 uhci_hcd [ 2.015327] usb usb6: SerialNumber: ... [ 2.015469] hub 6-0:1.0: USB hub found [ 2.015478] hub 6-0:1.0: 2 ports detected [ 2.015847] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.015855] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 2.015863] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.015907] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040 [ 2.015975] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.015977] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.015979] usb usb7: Product: UHCI Host Controller [ 2.015981] usb usb7: Manufacturer: Linux 5.10.74-generic-2rosa2021.1-x86_64 uhci_hcd [ 2.015983] usb usb7: SerialNumber: ... [ 2.016127] hub 7-0:1.0: USB hub found [ 2.016136] hub 7-0:1.0: 2 ports detected [ 2.016352] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 2.038634] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.038641] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.038831] mousedev: PS/2 mouse device common for all mice [ 2.039296] rtc_cmos 00:01: RTC can wake from S4 [ 2.039542] rtc_cmos 00:01: registered as rtc0 [ 2.039572] rtc_cmos 00:01: setting system clock to 2022-04-04T14:20:37 UTC (1649082037) [ 2.039598] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.039609] i2c /dev entries driver [ 2.039708] device-mapper: uevent: version 1.0.3 [ 2.039808] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 2.039844] platform eisa.0: Probing EISA bus 0 [ 2.039847] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.039850] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.039852] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.039854] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.039856] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.039858] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.039860] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.039862] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.039863] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.039865] platform eisa.0: EISA: Detected 0 cards [ 2.039868] intel_pstate: CPU model not supported [ 2.039903] ledtrig-cpu: registered to indicate activity on CPUs [ 2.040048] drop_monitor: Initializing network drop monitor service [ 2.040307] NET: Registered protocol family 10 [ 2.046964] Segment Routing with IPv6 [ 2.046968] RPL Segment Routing with IPv6 [ 2.047009] NET: Registered protocol family 17 [ 2.047073] Key type dns_resolver registered [ 2.047361] microcode: sig=0x1067a, pf=0x80, revision=0xa0b [ 2.047410] microcode: Microcode Update Driver: v2.2. [ 2.047417] IPI shorthand broadcast: enabled [ 2.047429] sched_clock: Marking stable (2044954561, 2449254)->(2687182959, -639779144) [ 2.047531] registered taskstats version 1 [ 2.047551] Loading compiled-in X.509 certificates [ 2.048048] Loaded X.509 cert 'ROSA rpmbuild: Build time autogenerated RSA kernel key: 8e27eee1ed3d7e1497c78b6fdb1e8210969ce06c' [ 2.056223] Loaded X.509 cert 'ROSA rpmbuild: Build time autogenerated GOST R 34.10-2012 kernel key: dc85ef8a04013ff9386d9b47091871571ec599f2' [ 2.056592] Loaded X.509 cert 'ROSA rpmbuild: Build time autogenerated RSA kernel key: 8e27eee1ed3d7e1497c78b6fdb1e8210969ce06c' [ 2.063713] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 1: 389ee1c4c658fdefa29af71a830e52beac51de63' [ 2.065443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.070688] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 2: ad2ae6733e2468dfc63212cab91e8f6afecc1c97' [ 2.077759] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 3: adf284f4f95ffde2729180539381ec6f654b7601' [ 2.084892] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 4: 1ac13c718c121167013b48be10b7fec700a72a5f' [ 2.091955] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 5: 4832b9d7dd982c47719220b059804d6aa33cbdf2' [ 2.099052] Loaded X.509 cert 'ROSA Linux: Kernel modules signing GOST R 34.10-2012 key 6: 2397e83db77b772b81188b11ff0a9a678e39027a' [ 2.099424] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 7: 8ee01da31e65bbc5ffef66996236ca51d7e65f33' [ 2.099785] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 8: 330dc0006698471801b4259c632a02bac1725421' [ 2.100146] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 9: 65d1e917155189196acf5286a15d4245eedf264a' [ 2.100496] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 10: 4a15701964a83da9afccdef90259a82372ac22b1' [ 2.100848] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 11: efb94f955f2289bbaf7fb31710cf4553baf9ca9f' [ 2.101209] Loaded X.509 cert 'ROSA Linux: Kernel modules signing RSA key 12: 00df2890cefd684b760646720bcca2525015278e' [ 2.102734] zswap: loaded using pool zstd/z3fold [ 2.103008] Key type ._fscrypt registered [ 2.103009] Key type .fscrypt registered [ 2.103010] Key type fscrypt-provisioning registered [ 2.103344] Btrfs loaded, crc32c=crc32c-generic [ 2.106468] Key type encrypted registered [ 2.106486] ima: No TPM chip found, activating TPM-bypass! [ 2.106490] ima: Allocated hash algorithm: sha1 [ 2.106505] ima: No architecture policies found [ 2.106532] evm: Initialising EVM extended attributes: [ 2.106534] evm: security.selinux [ 2.106535] evm: security.ima [ 2.106536] evm: security.capability [ 2.106538] evm: HMAC attrs: 0x1 [ 2.107087] PM: Magic number: 2:44:333 [ 2.107145] tty tty54: hash matches [ 2.107793] RAS: Correctable Errors collector initialized. [ 2.195315] random: fast init done [ 2.232411] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large: [ 2.232415] clocksource: 'hpet' wd_now: 29a7213 wd_last: 1d7d4a4 mask: ffffffff [ 2.232418] clocksource: 'tsc-early' cs_now: e4836e5d7 cs_last: e05f2dd93 mask: ffffffffffffffff [ 2.232423] tsc: Marking TSC unstable due to clocksource watchdog [ 2.232433] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.232436] sched_clock: Marking unstable (2229982629, 2449254)<-(2872211102, -639779144) [ 2.232604] clocksource: Switched to clocksource hpet [ 2.399124] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 2.570147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.572183] ata1.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133 [ 2.572187] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.575684] ata1.00: configured for UDMA/133 [ 2.591044] usb 4-1: New USB device found, idVendor=045e, idProduct=0084, bcdDevice= 3.90 [ 2.591048] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.591052] usb 4-1: Product: Microsoft Basic Optical Mouse [ 2.591055] usb 4-1: Manufacturer: Microsoft [ 3.029150] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 3.101519] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] [ 3.168086] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000/0x0, board id: 0, fw id: 502560 [ 3.228284] usb 2-4: New USB device found, idVendor=064e, idProduct=a103, bcdDevice= 5.00 [ 3.228289] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 3.228292] usb 2-4: Product: Video WebCam [ 3.228295] usb 2-4: Manufacturer: SuYin [ 3.228298] usb 2-4: SerialNumber: ... [ 3.252463] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.355808] usb 2-7: new high-speed USB device number 4 using ehci-pci [ 3.462682] battery: ACPI: Battery Slot [BAT0] (battery present) [ 3.463065] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 1A01 PQ: 0 ANSI: 5 [ 3.463372] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.463437] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.463463] sd 0:0:0:0: [sda] Write Protect is off [ 3.463467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.463498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.504035] sda: sda1 sda2 [ 3.506602] usb 2-7: New USB device found, idVendor=8086, idProduct=0180, bcdDevice= 0.00 [ 3.506605] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.506608] usb 2-7: Product: Intel(R) WiMAX Link 5150 [ 3.506610] usb 2-7: Manufacturer: Intel(R) Corporation [ 3.529421] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.932469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.934436] ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100 [ 3.938029] ata2.00: configured for UDMA/100 [ 3.944172] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5 [ 4.016099] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.016103] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.072537] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.072707] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.077627] Freeing unused decrypted memory: 2036K [ 4.079346] Freeing unused kernel image (initmem) memory: 2648K [ 4.079446] Write protecting the kernel read-only data: 24576k [ 4.081296] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 4.081953] Freeing unused kernel image (rodata/data gap) memory: 700K [ 4.082037] Run /init as init process [ 4.082041] with arguments: [ 4.082043] /init [ 4.082046] rhgb [ 4.082048] with environment: [ 4.082050] HOME=/ [ 4.082052] TERM=linux [ 4.082055] BOOT_IMAGE=/boot/vmlinuz-5.10.74-generic-2rosa2021.1-x86_64 [ 4.082057] splash=silent [ 4.112438] systemd[1]: Inserted module 'autofs4' [ 4.131377] systemd[1]: systemd 249 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.145920] systemd[1]: Detected architecture x86-64. [ 4.145930] systemd[1]: Running in initial RAM disk. [ 4.146022] systemd[1]: No hostname configured, using default hostname. [ 4.146187] systemd[1]: Hostname set to ... [ 4.146333] random: systemd: uninitialized urandom read (16 bytes read) [ 4.146349] systemd[1]: Initializing machine ID from random generator. [ 4.267383] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 4.286526] systemd[1]: Queued start job for default target Initrd Default Target. [ 4.286887] random: systemd: uninitialized urandom read (16 bytes read) [ 4.286913] systemd[1]: Reached target Initrd /usr File System. [ 4.287026] random: systemd: uninitialized urandom read (16 bytes read) [ 4.287045] systemd[1]: Reached target Local File Systems. [ 4.287104] systemd[1]: Reached target Slice Units. [ 4.287155] systemd[1]: Reached target Swaps. [ 4.287200] systemd[1]: Reached target Timer Units. [ 4.287511] systemd[1]: Listening on Journal Audit Socket. [ 4.287714] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.287909] systemd[1]: Listening on Journal Socket. [ 4.288159] systemd[1]: Listening on udev Control Socket. [ 4.288355] systemd[1]: Listening on udev Kernel Socket. [ 4.288403] systemd[1]: Reached target Socket Units. [ 4.290885] systemd[1]: Starting Create List of Static Device Nodes... [ 4.294221] systemd[1]: Starting Journal Service... [ 4.294559] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. [ 4.296678] systemd[1]: Starting Apply Kernel Variables... [ 4.298720] systemd[1]: Starting Setup Virtual Console... [ 4.300397] systemd[1]: Finished Create List of Static Device Nodes. [ 4.312563] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.323108] systemd[1]: Finished Apply Kernel Variables. [ 4.323797] systemd[1]: Finished Create Static Device Nodes in /dev. [ 4.357970] systemd[1]: Finished Setup Virtual Console. [ 4.359838] systemd[1]: Starting dracut ask for additional cmdline parameters... [ 4.395840] systemd[1]: Finished dracut ask for additional cmdline parameters. [ 4.397764] systemd[1]: Starting dracut cmdline hook... [ 4.437388] systemd[1]: Started Journal Service. [ 4.756195] RPC: Registered named UNIX socket transport module. [ 4.756199] RPC: Registered udp transport module. [ 4.756200] RPC: Registered tcp transport module. [ 4.756202] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.929131] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.934725] ata2.00: configured for UDMA/100 [ 5.863614] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found [ 5.907691] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.919130] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.926780] ata2.00: configured for UDMA/100 [ 6.053539] hid: raw HID events driver (C) Jiri Kosina [ 6.195389] usbcore: registered new interface driver usbhid [ 6.195394] usbhid: USB HID core driver [ 6.273482] acpi device:02: registered as cooling_device2 [ 6.273586] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7 [ 6.274720] atl1c 0000:05:00.0 enp5s0: renamed from eth0 [ 6.298557] [drm] radeon kernel modesetting enabled. [ 6.298651] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 6.299194] Console: switching to colour dummy device 80x25 [ 6.299544] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1025:0x0212 0x00). [ 6.299672] ATOM BIOS: BR34582.001 [ 6.299714] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 6.299717] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF [ 6.299722] [drm] Detected VRAM RAM=512M, BAR=256M [ 6.299723] [drm] RAM width 64bits DDR [ 6.299819] [TTM] Zone kernel: Available graphics memory: 3041106 KiB [ 6.299821] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 6.299822] [TTM] Initializing pool allocator [ 6.299828] [TTM] Initializing DMA pool allocator [ 6.299856] [drm] radeon: 512M of VRAM memory ready [ 6.299857] [drm] radeon: 1024M of GTT memory ready. [ 6.299884] [drm] Loading RV710 Microcode [ 6.302212] [drm] radeon: dpm initialized [ 6.302349] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 6.310269] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/0003:045E:0084.0001/input/input8 [ 6.320937] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 6.329402] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 6.330482] radeon 0000:01:00.0: WB enabled [ 6.330488] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 [ 6.330490] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c [ 6.331087] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 [ 6.336566] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 6.336691] radeon 0000:01:00.0: radeon: using MSI. [ 6.336730] [drm] radeon: irq initialized. [ 6.392892] [drm] ring test on 0 succeeded in 1 usecs [ 6.392903] [drm] ring test on 3 succeeded in 3 usecs [ 6.849107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.854715] ata2.00: configured for UDMA/100 [ 7.406735] [drm:radeon_uvd_send_upll_ctlreq [radeon]] *ERROR* Timeout setting UVD clocks! [ 7.432889] [drm] ring test on 5 succeeded in 1 usecs [ 7.432895] [drm] UVD initialized successfully. [ 7.433088] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.433113] [drm] ib test on ring 3 succeeded in 0 usecs [ 8.446829] [drm:radeon_uvd_send_upll_ctlreq [radeon]] *ERROR* Timeout setting UVD clocks! [ 8.446869] [drm:uvd_v1_0_ib_test [radeon]] *ERROR* radeon: failed to raise UVD clocks (-110). [ 8.446938] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on ring 5 (-110). [ 8.459134] ata2.00: limiting speed to UDMA/66:PIO4 [ 8.505824] [drm] radeon atom DIG backlight initialized [ 8.505828] [drm] Radeon Display Connectors [ 8.505830] [drm] Connector 0: [ 8.505832] [drm] LVDS-1 [ 8.505834] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74 [ 8.505835] [drm] Encoders: [ 8.505836] [drm] LCD1: INTERNAL_UNIPHY2 [ 8.505838] [drm] Connector 1: [ 8.505839] [drm] VGA-1 [ 8.505841] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 8.505842] [drm] Encoders: [ 8.505844] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.332456] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.338001] ata2.00: configured for UDMA/66 [ 9.498464] [drm] fb mappable at 0xC034D000 [ 9.498468] [drm] vram apper at 0xC0000000 [ 9.498470] [drm] size 4325376 [ 9.498471] [drm] fb depth is 24 [ 9.498472] [drm] pitch is 5632 [ 9.498605] fbcon: radeondrmfb (fb0) is primary device [ 10.103194] Console: switching to colour frame buffer device 128x48 [ 10.105378] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 10.119904] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 10.302455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.019076] random: crng init done [ 13.019080] random: 7 urandom warning(s) missed due to ratelimiting [ 15.405789] ata2.00: qc timeout (cmd 0xa1) [ 15.405799] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 15.405801] ata2.00: revalidation failed (errno=-5) [ 15.875797] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.879096] ata2.00: configured for UDMA/66 [ 15.932449] ata2.00: limiting speed to UDMA/33:PIO4 [ 25.932506] ata2: softreset failed (1st FIS failed) [ 31.832473] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.838042] ata2.00: configured for UDMA/33 [ 31.949423] ata2.00: limiting speed to PIO4 [ 32.187843] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 32.819140] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.824780] ata2.00: configured for PIO4 [ 32.855684] ata2.00: limiting speed to PIO3 [ 33.191468] systemd-journald[188]: Received SIGTERM from PID 1 (systemd). [ 33.725813] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.731387] ata2.00: configured for PIO3 [ 33.767543] ata2.00: limiting speed to PIO0 [ 34.635808] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.152142] systemd[1]: systemd 249 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 35.165928] systemd[1]: Detected architecture x86-64. [ 35.195818] systemd[1]: Hostname set to ... [ 36.025011] systemd-sysv-generator[621]: SysV service '/etc/rc.d/init.d/pppoe' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 36.049825] systemd-sysv-generator[621]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 38.514400] systemd[1]: /lib/systemd/system/ip6tables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 38.514417] systemd[1]: /lib/systemd/system/ip6tables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 38.514992] systemd[1]: /lib/systemd/system/iptables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 38.515007] systemd[1]: /lib/systemd/system/iptables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 38.602941] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 38.914294] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 38.914683] systemd[1]: Stopped Switch Root. [ 38.915435] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 38.916214] systemd[1]: Created slice Slice /system/getty. [ 38.916960] systemd[1]: Created slice Slice /system/modprobe. [ 38.917683] systemd[1]: Created slice Slice /system/systemd-fsck. [ 38.918194] systemd[1]: Created slice User and Session Slice. [ 38.918303] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of a failed condition check (ConditionPathExists=!/run/plymouth/pid). [ 38.918456] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 38.918799] systemd[1]: Set up automount ... [ 38.918919] systemd[1]: Reached target Login Prompts. [ 38.918992] systemd[1]: Stopped target Switch Root. [ 38.919059] systemd[1]: Stopped target Initrd File Systems. [ 38.919172] systemd[1]: Stopped target Initrd Root File System. [ 38.919304] systemd[1]: Reached target Remote Encrypted Volumes. [ 38.919377] systemd[1]: Reached target Remote File Systems. [ 38.919454] systemd[1]: Reached target Slice Units. [ 38.919540] systemd[1]: Reached target Swaps. [ 38.919623] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 38.919832] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 38.934852] systemd[1]: Listening on RPCbind Server Activation Socket. [ 38.935072] systemd[1]: Reached target RPC Port Mapper. [ 38.937564] systemd[1]: Listening on Process Core Dump Socket. [ 38.937832] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 38.938212] systemd[1]: Listening on udev Control Socket. [ 38.938530] systemd[1]: Listening on udev Kernel Socket. [ 38.953271] systemd[1]: Listening on User Database Manager Socket. [ 38.955271] systemd[1]: Mounting Huge Pages File System... [ 38.957478] systemd[1]: Mounting POSIX Message Queue File System... [ 38.959671] systemd[1]: Mounting Kernel Debug File System... [ 38.961813] systemd[1]: Mounting Kernel Trace File System... [ 39.019279] systemd[1]: Mounting Temporary Directory /tmp... [ 39.021849] systemd[1]: Starting Create List of Static Device Nodes... [ 39.065566] systemd[1]: Starting Load legacy module configuration... [ 39.069021] systemd[1]: Starting Load Kernel Module configfs... [ 39.071426] systemd[1]: Starting Load Kernel Module drm... [ 39.076047] systemd[1]: Starting Load Kernel Module fuse... [ 39.076346] systemd[1]: plymouth-switch-root.service: Deactivated successfully. [ 39.076529] systemd[1]: Stopped Plymouth switch root service. [ 39.134627] systemd[1]: Starting RPC Bind... [ 39.190371] systemd[1]: Set Up Additional Binary Formats was skipped because all trigger condition checks failed. [ 39.190504] systemd[1]: Stopped Journal Service. [ 39.194311] systemd[1]: Starting Journal Service... [ 39.258138] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. [ 39.261157] systemd[1]: Starting Remount Root and Kernel File Systems... [ 39.264994] systemd[1]: Starting Apply Kernel Variables... [ 39.267960] systemd[1]: Starting Coldplug All udev Devices... [ 39.272257] systemd[1]: Mounted Huge Pages File System. [ 39.272769] systemd[1]: Mounted POSIX Message Queue File System. [ 39.273144] systemd[1]: Mounted Kernel Debug File System. [ 39.273504] systemd[1]: Mounted Kernel Trace File System. [ 39.273866] systemd[1]: Mounted Temporary Directory /tmp. [ 39.274717] systemd[1]: Finished Create List of Static Device Nodes. [ 39.275586] systemd[1]: XXX@XXX: Deactivated successfully. [ 39.276121] systemd[1]: Finished Load Kernel Module configfs. [ 39.276745] systemd[1]: XXX@XXX: Deactivated successfully. [ 39.277121] systemd[1]: Finished Load Kernel Module drm. [ 39.277717] systemd[1]: XXX@XXX: Deactivated successfully. [ 39.278094] systemd[1]: Finished Load Kernel Module fuse. [ 39.280576] systemd[1]: Mounting FUSE Control File System... [ 39.283135] systemd[1]: Mounting Kernel Configuration File System... [ 39.285216] systemd[1]: Mounted FUSE Control File System. [ 39.290828] systemd[1]: Mounted Kernel Configuration File System. [ 39.378811] EXT4-fs (sda1): re-mounted. Opts: (null) [ 39.384777] systemd[1]: Finished Remount Root and Kernel File Systems. [ 39.385428] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes). [ 39.530460] systemd[1]: Starting Rebuild Hardware Database... [ 39.531017] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 39.534273] systemd[1]: Starting Load/Save Random Seed... [ 39.537316] systemd[1]: Starting Create System Users... [ 39.539609] systemd[1]: Finished Load legacy module configuration. [ 39.580324] systemd[1]: Started Journal Service. [ 39.641811] ata2.00: failed to set xfermode (err_mask=0x100) [ 39.677497] systemd-journald[643]: Received client request to flush runtime journal. [ 40.115786] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.121386] ata2.00: configured for PIO0 [ 41.062469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.068050] ata2.00: configured for PIO0 [ 41.965801] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.971383] ata2.00: configured for PIO0 [ 42.902453] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 42.908057] ata2.00: configured for PIO0 [ 43.829152] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 43.834774] ata2.00: configured for PIO0 [ 44.735807] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 44.741368] ata2.00: configured for PIO0 [ 45.642469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.648075] ata2.00: configured for PIO0 [ 46.516423] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20200925/utaddress-204) [ 46.516435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 46.516438] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200925/utaddress-204) [ 46.516444] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 46.516445] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200925/utaddress-204) [ 46.516450] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 46.516452] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 46.773176] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 46.911050] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 46.911471] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 46.930656] intel_powerclamp: No package C-state available [ 46.959616] intel_powerclamp: No package C-state available [ 47.056678] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.059348] acer_wmi: Function bitmap for Communication Device: 0x1 [ 47.102649] Intel(R) Wireless WiFi driver for Linux [ 47.102898] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 47.684285] iTCO_vendor_support: vendor-support=0 [ 47.881585] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 47.881674] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 47.881933] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 47.997665] mc: Linux media interface: v0.10 [ 48.047288] videodev: Linux video capture interface: v2.00 [ 48.230977] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103) [ 48.256245] input: Video WebCam: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9 [ 48.257279] usbcore: registered new interface driver uvcvideo [ 48.257283] USB Video Class driver (1.1.1) [ 48.427601] i2400m_usb 2-7:1.0: WiMAX interface wmx0 (XXX) ready [ 48.466450] iwlwifi 0000:04:00.0: loaded firmware version XXX.XXX.XXX.XXX 5150-2.ucode op_mode iwldvm [ 48.873548] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 48.873553] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 48.873555] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 48.873558] iwlwifi 0000:04:00.0: Detected Intel(R) WiMAX/WiFi Link 5150 ABG, REV=0x44 [ 48.932582] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 48.973012] wl: loading out-of-tree module taints kernel. [ 48.973020] wl: module license 'MIXED/Proprietary' taints kernel. [ 48.973021] Disabling lock debugging due to kernel taint [ 49.003017] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 49.243575] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 49.243579] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 49.243581] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 49.243583] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 49.243584] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 49.243587] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 49.262948] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 49.263088] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 50.819132] ata2.00: qc timeout (cmd 0xa0) [ 50.819142] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 50.977399] i2400m_usb 2-7:1.0: untested minor fw version 9.3.2 [ 50.977403] i2400m_usb 2-7:1.0: firmware interface version 9.3.2 [ 50.985684] usbcore: registered new interface driver i2400m_usb [ 51.001408] i2400m_usb 2-7:1.0 enp0s29f7u7: renamed from wmx0 [ 51.295776] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 51.301333] ata2.00: configured for PIO0 [ 56.369111] ata2.00: qc timeout (cmd 0xa0) [ 56.369128] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 56.839136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 56.844689] ata2.00: configured for PIO0 [ 57.849142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 57.854713] ata2.00: configured for PIO0 [ 58.955783] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 58.961345] ata2.00: configured for PIO0 [ 59.895791] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 59.901376] ata2.00: configured for PIO0 [ 60.168596] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 60.809132] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 60.934641] ata2.00: failed to set xfermode (err_mask=0x1) [ 66.435793] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 66.439016] ata2.00: configured for PIO0 [ 67.379108] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 67.382429] ata2.00: configured for PIO0 [ 68.282605] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 68.286038] ata2.00: configured for PIO0 [ 69.199107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 69.202335] ata2.00: configured for PIO0 [ 71.631376] atl1c 0000:05:00.0: atl1c: enp5s0 NIC Link is Up<100 Mbps Full Duplex> [ 71.653014] iwlwifi 0000:04:00.0: Radio type=0x1-0x1-0x0 [ 71.806887] iwlwifi 0000:04:00.0: Radio type=0x1-0x1-0x0 [ 74.206253] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 74.675785] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 74.679041] ata2.00: configured for PIO0 [ 75.619123] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 75.622418] ata2.00: configured for PIO0 [ 76.552461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 76.555892] ata2.00: configured for PIO0 [ 77.462447] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 77.465802] ata2.00: configured for PIO0 [ 79.460943] Bluetooth: Core ver 2.22 [ 79.461004] NET: Registered protocol family 31 [ 79.461006] Bluetooth: HCI device and connection manager initialized [ 79.461013] Bluetooth: HCI socket layer initialized [ 79.461018] Bluetooth: L2CAP socket layer initialized [ 79.461025] Bluetooth: SCO socket layer initialized [ 80.400695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 80.400699] Bluetooth: BNEP filters: protocol multicast [ 80.400706] Bluetooth: BNEP socket layer initialized [ 82.425886] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 82.935756] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 87.548292] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 87.548297] ata2.00: revalidation failed (errno=-5) [ 88.409096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 88.412322] ata2.00: configured for PIO0 [ 88.955783] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 88.959043] ata2.00: configured for PIO0 [ 89.895768] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 89.898994] ata2.00: configured for PIO0 [ 90.815758] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 90.819015] ata2.00: configured for PIO0 [ 91.735766] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 91.739054] ata2.00: configured for PIO0 [ 92.665772] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 92.669105] ata2.00: configured for PIO0 [ 93.579102] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 93.582362] ata2.00: configured for PIO0 [ 94.515763] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 94.519032] ata2.00: configured for PIO0 [ 95.419113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 96.315396] rfkill: input handler disabled [ 100.421972] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 100.421977] ata2.00: revalidation failed (errno=-5) [ 100.892472] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 100.895782] ata2.00: configured for PIO0 [ 101.849138] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 101.852439] ata2.00: configured for PIO0 [ 102.782457] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 102.785718] ata2.00: configured for PIO0 [ 103.689115] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 103.695565] ata2.00: configured for PIO0 [ 104.625802] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 104.629086] ata2.00: configured for PIO0 [ 105.555784] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 105.559012] ata2.00: configured for PIO0 [ 106.455794] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 111.459392] ata2.00: failed to set xfermode (err_mask=0x100) [ 111.929103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 111.932360] ata2.00: configured for PIO0 [ 117.479096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 122.486839] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 122.486844] ata2.00: revalidation failed (errno=-5) [ 122.955777] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 122.959107] ata2.00: configured for PIO0 [ 123.859103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 123.862365] ata2.00: configured for PIO0 [ 124.769118] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 124.772450] ata2.00: configured for PIO0 [ 125.672486] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 125.675774] ata2.00: configured for PIO0 [ 126.585768] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 126.589674] ata2.00: configured for PIO0 [ 126.639616] rfkill: input handler enabled [ 127.495775] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 127.499095] ata2.00: configured for PIO0 [ 132.525765] ata2.00: qc timeout (cmd 0xa0) [ 132.525776] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 138.005763] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 138.008989] ata2.00: configured for PIO0 [ 138.952478] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 138.955845] ata2.00: configured for PIO0 [ 139.859092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 144.861093] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 144.861097] ata2.00: revalidation failed (errno=-5) [ 145.332463] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 145.335706] ata2.00: configured for PIO0 [ 146.245758] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 146.249103] ata2.00: configured for PIO0 [ 147.159105] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 147.162376] ata2.00: configured for PIO0 [ 148.062443] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 148.065801] ata2.00: configured for PIO0 [ 148.975805] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 148.979717] ata2.00: configured for PIO0 [ 153.982449] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 154.455772] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 154.459000] ata2.00: configured for PIO0 [ 155.429120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 160.439261] ata2.00: failed to set xfermode (err_mask=0x100) [ 160.909110] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 160.912467] ata2.00: configured for PIO0 [ 166.442470] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 166.445752] ata2.00: configured for PIO0 [ 177.272403] ata2: link is slow to respond, please be patient (ready=0) [ 181.799077] ata2: softreset failed (device not ready) [ 182.269142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 182.272758] ata2.00: configured for PIO0 [ 187.772416] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 187.776623] ata2.00: configured for PIO0 [ 193.252429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 193.255688] ata2.00: configured for PIO0 [ 198.261953] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 208.263360] ata2: softreset failed (1st FIS failed) [ 213.779104] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 213.782432] ata2.00: configured for PIO0 [ 219.742435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 219.745702] ata2.00: configured for PIO0 [ 225.342409] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 225.345703] ata2.00: configured for PIO0 [ 226.309107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 226.312351] ata2.00: configured for PIO0 [ 231.889075] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 236.892776] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 236.892781] ata2.00: revalidation failed (errno=-5) [ 237.362421] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 237.365638] ata2.00: configured for PIO0 [ 242.371541] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 242.845755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 242.849014] ata2.00: configured for PIO0 [ 248.379090] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 248.382441] ata2.00: configured for PIO0 [ 248.722409] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x440100 action 0x6 frozen [ 248.722413] ata2.00: irq_stat 0x08000000, interface fatal error [ 248.722416] ata2: SError: { UnrecovData CommWake Handshk } [ 248.722426] ata2.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 6 pio 16420 in Inquiry 12 00 00 00 24 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 248.722428] ata2.00: status: { DRDY } [ 248.722432] ata2: hard resetting link [ 249.192419] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 249.195680] ata2.00: configured for PIO0 [ 254.669098] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 254.672349] ata2.00: configured for PIO0 [ 254.672998] ata2: EH complete [ 260.465753] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 260.469018] ata2.00: configured for PIO0 [ 261.009083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 261.012330] ata2.00: configured for PIO0 [ 261.549085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 261.552410] ata2.00: configured for PIO0 [ 266.262854] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 267.132425] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 267.135688] ata2.00: configured for PIO0 [ 268.059073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 268.062320] ata2.00: configured for PIO0 [ 269.079071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 269.082363] ata2.00: configured for PIO0 [ 269.652437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 274.655265] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 274.655271] ata2.00: revalidation failed (errno=-5) [ 275.129101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 275.132789] ata2.00: configured for PIO0 [ 280.695740] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 285.699261] ata2.00: qc timeout (cmd 0xa1) [ 285.699271] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 285.699274] ata2.00: revalidation failed (errno=-5) [ 286.169086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 286.172370] ata2.00: configured for PIO0 [ 287.195761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 287.199017] ata2.00: configured for PIO0 [ 293.369097] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 298.499106] ata2.00: qc timeout (cmd 0xa1) [ 298.499116] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 298.499118] ata2.00: revalidation failed (errno=-5) [ 298.969122] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 298.972583] ata2.00: configured for PIO0 [ 304.499100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 304.502373] ata2.00: configured for PIO0 [ 305.502415] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 305.505766] ata2.00: configured for PIO0 [ 306.635804] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 306.639066] ata2.00: configured for PIO0 [ 312.149096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 312.152362] ata2.00: configured for PIO0 [ 317.685772] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 317.689447] ata2.00: configured for PIO0 [ 318.645759] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 318.649313] ata2.00: configured for PIO0 [ 323.672407] ata2.00: qc timeout (cmd 0xa0) [ 323.672418] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 329.149181] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 329.152438] ata2.00: configured for PIO0 [ 334.342451] ata2.00: qc timeout (cmd 0xa0) [ 339.835780] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 339.839090] ata2.00: configured for PIO0 [ 345.039087] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x840100 action 0x6 frozen [ 345.039091] ata2.00: irq_stat 0x08000000, interface fatal error [ 345.039094] ata2: SError: { UnrecovData CommWake LinkSeq } [ 345.039103] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 1 pio 16392 in Get configuration 46 00 00 00 00 00 00 00 08 00res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 345.039105] ata2.00: status: { DRDY } [ 345.039110] ata2: hard resetting link [ 345.509095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 345.512421] ata2.00: configured for PIO0 [ 345.513098] ata2: EH complete [ 348.940426] perf: interrupt took too long (3152 > 3143), lowering kernel.perf_event_max_sample_rate to 63300 [ 360.546147] ata2: softreset failed (1st FIS failed) [ 366.035761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 366.039025] ata2.00: configured for PIO0 [ 367.049086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 367.052322] ata2.00: configured for PIO0 [ 367.959091] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 367.962364] ata2.00: configured for PIO0 [ 368.862428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 368.865762] ata2.00: configured for PIO0 [ 374.019082] ata2.00: qc timeout (cmd 0xa0) [ 374.019093] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 379.522411] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 384.531818] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 384.531822] ata2.00: revalidation failed (errno=-5) [ 385.002422] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 385.005660] ata2.00: configured for PIO0 [ 390.529077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 390.532447] ata2.00: configured for PIO0 [ 391.432412] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 391.435678] ata2.00: configured for PIO0 [ 392.342476] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 392.345746] ata2.00: configured for PIO0 [ 393.252435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 393.255806] ata2.00: configured for PIO0 [ 394.149095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 394.152439] ata2.00: configured for PIO0 [ 399.659070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 399.662943] ata2.00: configured for PIO0 [ 405.139205] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 405.142539] ata2.00: configured for PIO0 [ 406.042423] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 406.045741] ata2.00: configured for PIO0 [ 406.952404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 406.955675] ata2.00: configured for PIO0 [ 407.855766] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 407.859002] ata2.00: configured for PIO0 [ 417.895958] ata2: softreset failed (1st FIS failed) [ 423.852424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 423.855692] ata2.00: configured for PIO0 [ 424.772425] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 424.775747] ata2.00: configured for PIO0 [ 425.675733] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 425.679102] ata2.00: configured for PIO0 [ 426.592407] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 426.595792] ata2.00: configured for PIO0 [ 427.512416] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 427.515763] ata2.00: configured for PIO0 [ 428.412399] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 428.415687] ata2.00: configured for PIO0 [ 429.319076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 429.322400] ata2.00: configured for PIO0 [ 434.852406] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 434.855636] ata2.00: configured for PIO0 [ 440.365764] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 440.369099] ata2.00: configured for PIO0 [ 450.403054] ata2: softreset failed (1st FIS failed) [ 456.329052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 456.332307] ata2.00: configured for PIO0 [ 457.235746] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 457.239014] ata2.00: configured for PIO0 [ 458.135744] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 458.139021] ata2.00: configured for PIO0 [ 459.049056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 459.052379] ata2.00: configured for PIO0 [ 464.549050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 464.552283] ata2.00: configured for PIO0 [ 465.459064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 465.462338] ata2.00: configured for PIO0 [ 466.372401] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 466.375837] ata2.00: configured for PIO0 [ 467.279056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 467.282309] ata2.00: configured for PIO0 [ 468.182424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 468.185687] ata2.00: configured for PIO0 [ 469.115727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 469.118967] ata2.00: configured for PIO0 [ 470.025719] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 470.029064] ata2.00: configured for PIO0 [ 470.962387] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 470.965735] ata2.00: configured for PIO0 [ 475.975128] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 476.445728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 481.453939] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 481.453943] ata2.00: revalidation failed (errno=-5) [ 481.922381] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 481.925735] ata2.00: configured for PIO0 [ 487.405733] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 492.411541] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 492.411545] ata2.00: revalidation failed (errno=-5) [ 492.882385] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 492.885733] ata2.00: configured for PIO0 [ 493.835743] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 493.839078] ata2.00: configured for PIO0 [ 494.765750] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 494.769093] ata2.00: configured for PIO0 [ 504.806705] ata2: softreset failed (1st FIS failed) [ 510.722379] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 512.665796] perf: interrupt took too long (3943 > 3940), lowering kernel.perf_event_max_sample_rate to 50700 [ 515.885713] ata2.00: qc timeout (cmd 0xa1) [ 515.885723] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 515.885725] ata2.00: revalidation failed (errno=-5) [ 521.372378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 521.375631] ata2.00: configured for PIO0 [ 522.282390] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 522.285893] ata2.00: failed to set xfermode (err_mask=0x1) [ 527.879065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 527.882336] ata2.00: configured for PIO0 [ 537.953253] ata2: softreset failed (1st FIS failed) [ 543.852391] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 548.952434] ata2.00: qc timeout (cmd 0xa1) [ 548.952444] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 548.952447] ata2.00: revalidation failed (errno=-5) [ 549.422381] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 549.425666] ata2.00: configured for PIO0 [ 554.942407] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 554.945829] ata2.00: configured for PIO0 [ 555.845737] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 555.849074] ata2.00: configured for PIO0 [ 556.779059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 556.782498] ata2.00: configured for PIO0 [ 557.705718] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 557.709062] ata2.00: configured for PIO0 [ 558.619104] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 558.622414] ata2.00: configured for PIO0 [ 559.515730] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 559.519384] ata2.00: configured for PIO0 [ 560.422381] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 560.425970] ata2.00: configured for PIO0 [ 561.362461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 561.365981] ata2.00: configured for PIO0 [ 562.259069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 562.262332] ata2.00: configured for PIO0 [ 563.189058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 563.192437] ata2.00: configured for PIO0 [ 564.089081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 564.092369] ata2.00: configured for PIO0 [ 574.142504] ata2: softreset failed (1st FIS failed) [ 580.045734] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 580.048988] ata2.00: configured for PIO0 [ 580.962415] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 580.965646] ata2.00: configured for PIO0 [ 581.892401] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 581.895664] ata2.00: configured for PIO0 [ 582.795718] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 582.799052] ata2.00: configured for PIO0 [ 583.699135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 583.702648] ata2.00: configured for PIO0 [ 584.612758] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 584.616226] ata2.00: configured for PIO0 [ 585.525727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 585.529042] ata2.00: configured for PIO0 [ 586.435732] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 586.439045] ata2.00: configured for PIO0 [ 587.365723] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 587.369431] ata2.00: configured for PIO0 [ 588.262429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 588.265747] ata2.00: configured for PIO0 [ 589.199055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 589.202332] ata2.00: configured for PIO0 [ 590.102726] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 590.106061] ata2.00: configured for PIO0 [ 591.005781] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 591.009354] ata2.00: configured for PIO0 [ 591.919066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 591.922310] ata2.00: configured for PIO0 [ 592.815802] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 592.819356] ata2.00: configured for PIO0 [ 593.715726] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 593.718989] ata2.00: configured for PIO0 [ 594.615763] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 594.619432] ata2.00: configured for PIO0 [ 599.622724] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 600.092394] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 600.095918] ata2.00: configured for PIO0 [ 601.019085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 601.022432] ata2.00: configured for PIO0 [ 601.922378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 601.926100] ata2.00: configured for PIO0 [ 602.852413] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 602.855719] ata2.00: configured for PIO0 [ 603.752409] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 603.755733] ata2.00: configured for PIO0 [ 604.652560] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 604.656179] ata2.00: configured for PIO0 [ 605.562375] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 605.565746] ata2.00: configured for PIO0 [ 606.499096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 606.502465] ata2.00: configured for PIO0 [ 607.409080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 607.412438] ata2.00: configured for PIO0 [ 612.416624] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 612.889054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 612.892406] ata2.00: configured for PIO0 [ 613.822430] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 613.826013] ata2.00: configured for PIO0 [ 614.722402] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 614.725670] ata2.00: configured for PIO0 [ 615.622449] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 615.625763] ata2.00: configured for PIO0 [ 616.525727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 616.529617] ata2.00: configured for PIO0 [ 617.429069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 617.432330] ata2.00: configured for PIO0 [ 618.339086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 618.342335] ata2.00: configured for PIO0 [ 619.242417] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 619.246115] ata2.00: configured for PIO0 [ 620.172395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 620.175811] ata2.00: configured for PIO0 [ 621.105737] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 621.109073] ata2.00: configured for PIO0 [ 622.005735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 622.009430] ata2.00: configured for PIO0 [ 622.905746] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 622.909035] ata2.00: configured for PIO0 [ 623.819064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 623.822377] ata2.00: configured for PIO0 [ 624.722395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 624.725716] ata2.00: configured for PIO0 [ 625.629047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 625.632401] ata2.00: configured for PIO0 [ 626.529060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 631.537676] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 631.537682] ata2.00: revalidation failed (errno=-5) [ 632.005723] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 632.009322] ata2.00: configured for PIO0 [ 632.505770] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 632.509247] ata2.00: configured for PIO0 [ 633.432397] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 633.435713] ata2.00: configured for PIO0 [ 634.329065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 634.332739] ata2.00: configured for PIO0 [ 639.341708] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 639.815766] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 639.819454] ata2.00: configured for PIO0 [ 640.745748] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 640.749414] ata2.00: configured for PIO0 [ 641.645748] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 641.649170] ata2.00: configured for PIO0 [ 642.549062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 642.552323] ata2.00: configured for PIO0 [ 643.479039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 643.482296] ata2.00: configured for PIO0 [ 644.385707] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 644.388934] ata2.00: configured for PIO0 [ 645.295784] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 645.299125] ata2.00: configured for PIO0 [ 650.832386] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 650.835655] ata2.00: configured for PIO0 [ 651.742441] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 651.745856] ata2.00: configured for PIO0 [ 652.645773] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 652.649515] ata2.00: configured for PIO0 [ 653.549085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 653.552403] ata2.00: configured for PIO0 [ 659.032479] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 659.035746] ata2.00: configured for PIO0 [ 659.962388] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 664.969435] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 664.969443] ata2.00: revalidation failed (errno=-5) [ 665.439070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 665.442297] ata2.00: configured for PIO0 [ 666.379074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 666.382370] ata2.00: configured for PIO0 [ 676.416172] ata2: softreset failed (1st FIS failed) [ 682.289173] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 682.292460] ata2.00: configured for PIO0 [ 687.829039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 687.832293] ata2.00: configured for PIO0 [ 688.762396] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 688.765664] ata2.00: configured for PIO0 [ 689.669044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 689.672364] ata2.00: configured for PIO0 [ 690.572378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 690.575633] ata2.00: configured for PIO0 [ 691.472399] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 691.475823] ata2.00: configured for PIO0 [ 696.992371] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 696.995974] ata2.00: configured for PIO0 [ 697.895721] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 697.898998] ata2.00: configured for PIO0 [ 698.799059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 698.802405] ata2.00: configured for PIO0 [ 708.839135] ata2: softreset failed (1st FIS failed) [ 714.742419] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 714.745705] ata2.00: configured for PIO0 [ 715.645697] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 715.648986] ata2.00: configured for PIO0 [ 716.549093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 716.552696] ata2.00: configured for PIO0 [ 717.455757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 717.459040] ata2.00: configured for PIO0 [ 718.362366] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 718.365637] ata2.00: configured for PIO0 [ 719.292392] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 719.295727] ata2.00: configured for PIO0 [ 720.199032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 720.202287] ata2.00: configured for PIO0 [ 730.235756] ata2: softreset failed (1st FIS failed) [ 736.135743] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 736.139026] ata2.00: configured for PIO0 [ 741.165788] ata2.00: qc timeout (cmd 0xef) [ 741.165799] ata2.00: failed to enable DIPM, Emask 0x5 [ 741.635722] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 746.642971] ata2.00: failed to set xfermode (err_mask=0x100) [ 747.115698] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 747.119066] ata2.00: configured for PIO0 [ 747.615750] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 747.619390] ata2.00: configured for PIO0 [ 748.519072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 748.522408] ata2.00: configured for PIO0 [ 749.425768] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 749.429039] ata2.00: configured for PIO0 [ 750.335779] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 750.339232] ata2.00: configured for PIO0 [ 751.272459] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 751.275790] ata2.00: configured for PIO0 [ 752.202378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 752.205691] ata2.00: configured for PIO0 [ 753.132375] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 753.135636] ata2.00: configured for PIO0 [ 754.035745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 754.039365] ata2.00: configured for PIO0 [ 754.965720] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 754.969351] ata2.00: configured for PIO0 [ 755.875700] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 755.878938] ata2.00: configured for PIO0 [ 756.809030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 756.812419] ata2.00: configured for PIO0 [ 757.739077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 757.742819] ata2.00: configured for PIO0 [ 763.219067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 763.222946] ata2.00: configured for PIO0 [ 764.162370] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 764.165678] ata2.00: configured for PIO0 [ 765.072364] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 765.075728] ata2.00: configured for PIO0 [ 765.985697] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 765.989057] ata2.00: configured for PIO0 [ 771.525715] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 771.529082] ata2.00: configured for PIO0 [ 772.429081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 772.432406] ata2.00: configured for PIO0 [ 773.362357] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 773.365632] ata2.00: configured for PIO0 [ 773.862402] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 773.866504] ata2.00: configured for PIO0 [ 774.762378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 774.765675] ata2.00: configured for PIO0 [ 775.665726] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 780.387132] perf: interrupt took too long (4931 > 4928), lowering kernel.perf_event_max_sample_rate to 40500 [ 780.673641] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 780.673657] ata2.00: revalidation failed (errno=-5) [ 781.142440] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 781.146038] ata2.00: configured for PIO0 [ 786.152485] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 786.622386] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 786.625652] ata2.00: configured for PIO0 [ 792.462407] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 797.485730] ata2.00: qc timeout (cmd 0xa1) [ 797.485740] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 797.485743] ata2.00: revalidation failed (errno=-5) [ 797.955707] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 797.959015] ata2.00: configured for PIO0 [ 803.032372] ata2.00: qc timeout (cmd 0xa0) [ 803.032383] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 803.502411] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 803.505701] ata2.00: configured for PIO0 [ 804.442370] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 804.445713] ata2.00: configured for PIO0 [ 805.369032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 805.372396] ata2.00: configured for PIO0 [ 806.279025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 806.282344] ata2.00: configured for PIO0 [ 811.291273] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 811.762359] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 811.765625] ata2.00: configured for PIO0 [ 812.262396] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 812.266397] ata2.00: configured for PIO0 [ 813.169039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 813.172326] ata2.00: configured for PIO0 [ 814.072404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 814.075730] ata2.00: configured for PIO0 [ 814.972371] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 814.975997] ata2.00: configured for PIO0 [ 815.879018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 815.882315] ata2.00: configured for PIO0 [ 816.782430] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 816.785969] ata2.00: configured for PIO0 [ 817.689049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 817.692376] ata2.00: configured for PIO0 [ 818.589098] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 818.592421] ata2.00: configured for PIO0 [ 819.499073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 819.502613] ata2.00: configured for PIO0 [ 820.399026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 820.402254] ata2.00: configured for PIO0 [ 821.299087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 821.303308] ata2.00: configured for PIO0 [ 822.202360] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 822.205709] ata2.00: configured for PIO0 [ 822.699095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 822.702408] ata2.00: configured for PIO0 [ 823.599049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 823.602302] ata2.00: configured for PIO0 [ 829.075694] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 829.078957] ata2.00: configured for PIO0 [ 830.032378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 830.035764] ata2.00: configured for PIO0 [ 830.942371] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 830.945691] ata2.00: configured for PIO0 [ 831.869054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 831.872397] ata2.00: configured for PIO0 [ 836.879095] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 837.349066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 837.352327] ata2.00: configured for PIO0 [ 847.406247] ata2: softreset failed (1st FIS failed) [ 848.279016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 848.282277] ata2.00: configured for PIO0 [ 849.189027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 849.192298] ata2.00: configured for PIO0 [ 850.089041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 850.092755] ata2.00: configured for PIO0 [ 850.995714] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 850.998969] ata2.00: configured for PIO0 [ 856.469058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 856.472387] ata2.00: configured for PIO0 [ 857.402360] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 857.405635] ata2.00: configured for PIO0 [ 862.875705] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 862.878991] ata2.00: configured for PIO0 [ 863.802354] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 863.805704] ata2.00: configured for PIO0 [ 864.705693] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 864.708922] ata2.00: configured for PIO0 [ 865.609068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 865.612700] ata2.00: configured for PIO0 [ 875.646331] ata2: softreset failed (1st FIS failed) [ 881.525702] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 881.529310] ata2.00: configured for PIO0 [ 882.452404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 882.456067] ata2.00: configured for PIO0 [ 883.365689] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 883.368943] ata2.00: configured for PIO0 [ 884.265725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 884.269042] ata2.00: configured for PIO0 [ 885.172400] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 885.175683] ata2.00: configured for PIO0 [ 890.689047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 890.692675] ata2.00: configured for PIO0 [ 891.595684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 891.599046] ata2.00: configured for PIO0 [ 892.499059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 892.502620] ata2.00: configured for PIO0 [ 893.412389] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 893.416070] ata2.00: configured for PIO0 [ 894.332397] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 894.335698] ata2.00: configured for PIO0 [ 899.839029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 899.842378] ata2.00: configured for PIO0 [ 900.772368] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 900.775645] ata2.00: configured for PIO0 [ 906.285816] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 911.287519] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 911.287525] ata2.00: revalidation failed (errno=-5) [ 911.755684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 911.759077] ata2.00: configured for PIO0 [ 912.665728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 912.668991] ata2.00: configured for PIO0 [ 913.575757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 913.579364] ata2.00: configured for PIO0 [ 914.485718] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 914.489071] ata2.00: configured for PIO0 [ 919.999010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 920.002305] ata2.00: configured for PIO0 [ 920.929108] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 920.932408] ata2.00: configured for PIO0 [ 921.839016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 921.842280] ata2.00: configured for PIO0 [ 922.772361] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 922.775722] ata2.00: configured for PIO0 [ 927.783867] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 928.252361] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 928.255760] ata2.00: configured for PIO0 [ 929.185696] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 929.188956] ata2.00: configured for PIO0 [ 930.085675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 930.089030] ata2.00: configured for PIO0 [ 930.992361] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 930.995615] ata2.00: configured for PIO0 [ 931.899036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 931.903149] ata2.00: configured for PIO0 [ 932.802351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 932.805694] ata2.00: configured for PIO0 [ 933.705680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 933.708944] ata2.00: configured for PIO0 [ 934.609084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 934.612426] ata2.00: configured for PIO0 [ 935.509071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 935.512647] ata2.00: configured for PIO0 [ 936.412400] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 936.415714] ata2.00: configured for PIO0 [ 941.915678] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 941.918897] ata2.00: configured for PIO0 [ 942.819050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 942.822579] ata2.00: configured for PIO0 [ 943.725697] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 943.729176] ata2.00: configured for PIO0 [ 944.629024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 944.632341] ata2.00: configured for PIO0 [ 945.529062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 945.532351] ata2.00: configured for PIO0 [ 946.435684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 946.439334] ata2.00: configured for PIO0 [ 947.339053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 947.343047] ata2.00: configured for PIO0 [ 948.275675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 948.278939] ata2.00: configured for PIO0 [ 949.205738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 949.209094] ata2.00: configured for PIO0 [ 950.115688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 950.118972] ata2.00: configured for PIO0 [ 951.029020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 951.032401] ata2.00: configured for PIO0 [ 951.929057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 951.932792] ata2.00: configured for PIO0 [ 952.839036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 952.842290] ata2.00: configured for PIO0 [ 953.745720] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 953.749326] ata2.00: configured for PIO0 [ 959.265725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 959.269046] ata2.00: configured for PIO0 [ 959.269099] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 964.782351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 964.785613] ata2.00: configured for PIO0 [ 965.689069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 965.692400] ata2.00: configured for PIO0 [ 966.602347] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 966.605689] ata2.00: configured for PIO0 [ 967.505728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 967.509022] ata2.00: configured for PIO0 [ 973.035683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 973.038948] ata2.00: configured for PIO0 [ 973.942396] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 973.945743] ata2.00: configured for PIO0 [ 974.849052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 974.852384] ata2.00: configured for PIO0 [ 975.762364] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 975.765682] ata2.00: configured for PIO0 [ 976.699057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 976.702391] ata2.00: configured for PIO0 [ 977.629070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 977.632355] ata2.00: configured for PIO0 [ 987.665756] ata2: softreset failed (1st FIS failed) [ 988.532390] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 988.536247] ata2.00: configured for PIO0 [ 989.479031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 989.482290] ata2.00: configured for PIO0 [ 990.385719] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 990.389044] ata2.00: configured for PIO0 [ 991.285675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 991.288973] ata2.00: configured for PIO0 [ 992.185694] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 992.188950] ata2.00: configured for PIO0 [ 993.112362] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 993.115629] ata2.00: configured for PIO0 [ 998.632360] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 998.635622] ata2.00: configured for PIO0 [ 999.562353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 999.565640] ata2.00: configured for PIO0 [ 1000.492384] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1000.496074] ata2.00: configured for PIO0 [ 1005.975684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1005.979238] ata2.00: configured for PIO0 [ 1006.905848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1006.909112] ata2.00: configured for PIO0 [ 1007.805738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1007.809398] ata2.00: configured for PIO0 [ 1008.705702] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1008.708941] ata2.00: configured for PIO0 [ 1009.615737] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1009.619278] ata2.00: configured for PIO0 [ 1010.522350] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1010.525724] ata2.00: configured for PIO0 [ 1016.029012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1016.032268] ata2.00: configured for PIO0 [ 1016.932373] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1021.942219] ata2.00: failed to set xfermode (err_mask=0x100) [ 1022.412377] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1022.416024] ata2.00: configured for PIO0 [ 1028.242341] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1033.432349] ata2.00: qc timeout (cmd 0xa1) [ 1033.432374] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1033.432376] ata2.00: revalidation failed (errno=-5) [ 1033.905726] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1033.909057] ata2.00: configured for PIO0 [ 1034.822383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1034.825693] ata2.00: configured for PIO0 [ 1035.725711] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1035.729379] ata2.00: configured for PIO0 [ 1036.625726] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1036.629046] ata2.00: configured for PIO0 [ 1037.555704] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1037.558937] ata2.00: configured for PIO0 [ 1038.455715] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1038.459398] ata2.00: configured for PIO0 [ 1039.359015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1039.362233] ata2.00: configured for PIO0 [ 1040.262385] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1045.264741] ata2.00: failed to set xfermode (err_mask=0x100) [ 1045.735684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1050.743590] ata2.00: failed to set xfermode (err_mask=0x100) [ 1051.212404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1051.216046] ata2.00: configured for PIO0 [ 1056.259126] ata2.00: qc timeout (cmd 0xa0) [ 1056.729048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1056.732706] ata2.00: configured for PIO0 [ 1057.639002] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1057.642384] ata2.00: configured for PIO0 [ 1058.549016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1058.552261] ata2.00: configured for PIO0 [ 1059.455719] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1059.459372] ata2.00: configured for PIO0 [ 1074.506654] ata2: softreset failed (1st FIS failed) [ 1079.995680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1079.998939] ata2.00: configured for PIO0 [ 1080.889041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1080.892336] ata2.00: configured for PIO0 [ 1081.829019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1081.832346] ata2.00: configured for PIO0 [ 1082.735716] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1082.739258] ata2.00: configured for PIO0 [ 1083.639068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1083.642743] ata2.00: configured for PIO0 [ 1084.549010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1084.552279] ata2.00: configured for PIO0 [ 1085.475659] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1085.478909] ata2.00: configured for PIO0 [ 1090.995668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1090.998896] ata2.00: configured for PIO0 [ 1091.905717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1091.909017] ata2.00: configured for PIO0 [ 1097.379032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1097.382352] ata2.00: configured for PIO0 [ 1098.315670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1098.319001] ata2.00: configured for PIO0 [ 1099.245698] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1099.249027] ata2.00: configured for PIO0 [ 1100.159024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1100.162574] ata2.00: configured for PIO0 [ 1105.692353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1105.695922] ata2.00: configured for PIO0 [ 1106.615690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1106.618987] ata2.00: configured for PIO0 [ 1112.129030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1112.132691] ata2.00: configured for PIO0 [ 1113.029168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1118.125721] ata2.00: qc timeout (cmd 0xa1) [ 1118.125733] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 1118.125736] ata2.00: revalidation failed (errno=-5) [ 1118.595688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1118.599301] ata2.00: configured for PIO0 [ 1119.529021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1119.532367] ata2.00: configured for PIO0 [ 1125.335824] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1130.499036] ata2.00: qc timeout (cmd 0xa1) [ 1130.499046] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1130.499049] ata2.00: revalidation failed (errno=-5) [ 1130.969026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1130.972587] ata2.00: configured for PIO0 [ 1131.902332] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1131.905620] ata2.00: configured for PIO0 [ 1132.829066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1132.832694] ata2.00: configured for PIO0 [ 1142.863391] ata2: softreset failed (1st FIS failed) [ 1143.729039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1143.732357] ata2.00: configured for PIO0 [ 1144.659020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1144.662515] ata2.00: configured for PIO0 [ 1145.589020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1145.592357] ata2.00: configured for PIO0 [ 1146.519020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1146.522417] ata2.00: configured for PIO0 [ 1147.449030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1147.452342] ata2.00: configured for PIO0 [ 1148.379047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1148.382319] ata2.00: configured for PIO0 [ 1149.305680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1149.308948] ata2.00: configured for PIO0 [ 1150.239055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1150.242407] ata2.00: configured for PIO0 [ 1151.145680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1151.148925] ata2.00: configured for PIO0 [ 1156.659028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1156.662366] ata2.00: configured for PIO0 [ 1157.589033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1157.592355] ata2.00: configured for PIO0 [ 1158.515671] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1158.518934] ata2.00: configured for PIO0 [ 1164.018991] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1164.022266] ata2.00: configured for PIO0 [ 1164.922344] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1164.925665] ata2.00: configured for PIO0 [ 1169.965699] ata2.00: qc timeout (cmd 0xa0) [ 1170.435664] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1170.438924] ata2.00: configured for PIO0 [ 1171.365704] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1171.368988] ata2.00: configured for PIO0 [ 1172.279032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1172.282362] ata2.00: configured for PIO0 [ 1173.175738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1173.179040] ata2.00: configured for PIO0 [ 1174.079023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1174.082843] ata2.00: configured for PIO0 [ 1179.139010] ata2.00: qc timeout (cmd 0xa0) [ 1179.609131] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1179.612694] ata2.00: configured for PIO0 [ 1180.522357] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1180.525721] ata2.00: configured for PIO0 [ 1181.452368] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1181.455661] ata2.00: configured for PIO0 [ 1182.365670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1182.369375] ata2.00: configured for PIO0 [ 1183.299013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1188.304719] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1188.304725] ata2.00: revalidation failed (errno=-5) [ 1188.779046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1188.782340] ata2.00: configured for PIO0 [ 1189.682340] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1189.685672] ata2.00: configured for PIO0 [ 1199.719201] ata2: softreset failed (1st FIS failed) [ 1205.615717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1205.619365] ata2.00: configured for PIO0 [ 1206.555705] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1206.559131] ata2.00: configured for PIO0 [ 1207.462361] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1207.465688] ata2.00: configured for PIO0 [ 1208.362332] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1208.366064] ata2.00: configured for PIO0 [ 1209.272315] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1209.275599] ata2.00: configured for PIO0 [ 1210.202354] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1210.205755] ata2.00: configured for PIO0 [ 1211.138994] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1211.142222] ata2.00: configured for PIO0 [ 1212.042333] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1212.045678] ata2.00: configured for PIO0 [ 1212.969044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1212.972718] ata2.00: configured for PIO0 [ 1213.878990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1213.882250] ata2.00: configured for PIO0 [ 1214.779024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1214.782651] ata2.00: configured for PIO0 [ 1215.678984] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1215.682324] ata2.00: configured for PIO0 [ 1216.585655] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1216.588994] ata2.00: configured for PIO0 [ 1217.518984] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1217.522230] ata2.00: configured for PIO0 [ 1218.425684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1218.428945] ata2.00: configured for PIO0 [ 1219.325698] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1219.328993] ata2.00: configured for PIO0 [ 1220.229027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1220.232635] ata2.00: configured for PIO0 [ 1221.132386] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1221.135944] ata2.00: configured for PIO0 [ 1222.052351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1222.055666] ata2.00: configured for PIO0 [ 1222.969036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1222.972382] ata2.00: configured for PIO0 [ 1223.878986] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1223.882253] ata2.00: configured for PIO0 [ 1224.788982] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1224.792565] ata2.00: configured for PIO0 [ 1225.718990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1225.722277] ata2.00: configured for PIO0 [ 1226.619032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1226.622392] ata2.00: configured for PIO0 [ 1236.653096] ata2: softreset failed (1st FIS failed) [ 1242.542391] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1242.545732] ata2.00: configured for PIO0 [ 1243.445703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1243.448998] ata2.00: configured for PIO0 [ 1244.355650] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1244.358912] ata2.00: configured for PIO0 [ 1245.272353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1245.275571] ata2.00: configured for PIO0 [ 1246.182370] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1246.185612] ata2.00: configured for PIO0 [ 1247.079007] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1247.082243] ata2.00: configured for PIO0 [ 1252.592328] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1252.595733] ata2.00: configured for PIO0 [ 1253.495675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1253.498981] ata2.00: configured for PIO0 [ 1254.399039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1254.402397] ata2.00: configured for PIO0 [ 1255.299158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1255.302608] ata2.00: configured for PIO0 [ 1256.205714] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1261.216751] ata2.00: failed to set xfermode (err_mask=0x100) [ 1261.689060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1261.692762] ata2.00: configured for PIO0 [ 1262.628976] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1262.632330] ata2.00: configured for PIO0 [ 1268.402329] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1273.432356] ata2.00: qc timeout (cmd 0xa1) [ 1273.432376] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1273.432379] ata2.00: revalidation failed (errno=-5) [ 1273.905680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1273.908986] ata2.00: configured for PIO0 [ 1274.835647] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1274.838922] ata2.00: configured for PIO0 [ 1275.739042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1275.742358] ata2.00: configured for PIO0 [ 1276.649034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1276.652319] ata2.00: configured for PIO0 [ 1277.548983] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1277.552253] ata2.00: configured for PIO0 [ 1282.553406] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1283.022308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1283.025662] ata2.00: configured for PIO0 [ 1283.965696] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1283.969455] ata2.00: configured for PIO0 [ 1284.865665] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1284.869303] ata2.00: configured for PIO0 [ 1285.779034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1290.786686] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1290.786690] ata2.00: revalidation failed (errno=-5) [ 1291.258996] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1291.262220] ata2.00: configured for PIO0 [ 1292.198977] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1292.202272] ata2.00: configured for PIO0 [ 1293.105654] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1293.108906] ata2.00: configured for PIO0 [ 1294.008990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1294.012687] ata2.00: configured for PIO0 [ 1294.925918] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1294.929341] ata2.00: configured for PIO0 [ 1295.825658] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1295.828966] ata2.00: configured for PIO0 [ 1301.305665] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1301.308892] ata2.00: configured for PIO0 [ 1306.315168] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1306.785644] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1306.788895] ata2.00: configured for PIO0 [ 1321.796368] ata2: softreset failed (1st FIS failed) [ 1327.278972] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1332.282473] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1332.282478] ata2.00: revalidation failed (errno=-5) [ 1332.755681] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1332.758957] ata2.00: configured for PIO0 [ 1342.816510] ata2: softreset failed (1st FIS failed) [ 1348.722496] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1348.725804] ata2.00: configured for PIO0 [ 1349.628975] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1349.632229] ata2.00: configured for PIO0 [ 1350.535681] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1350.539000] ata2.00: configured for PIO0 [ 1351.468989] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1351.472252] ata2.00: configured for PIO0 [ 1352.365766] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1352.369420] ata2.00: configured for PIO0 [ 1353.262330] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1353.265634] ata2.00: configured for PIO0 [ 1354.159067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1354.162669] ata2.00: configured for PIO0 [ 1355.092393] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1355.095837] ata2.00: configured for PIO0 [ 1355.992296] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1355.995643] ata2.00: configured for PIO0 [ 1356.892412] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1356.895978] ata2.00: configured for PIO0 [ 1362.402350] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1362.405785] ata2.00: configured for PIO0 [ 1363.319040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1363.323087] ata2.00: configured for PIO0 [ 1364.228988] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1364.232226] ata2.00: configured for PIO0 [ 1365.142308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1365.145559] ata2.00: configured for PIO0 [ 1366.045716] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1366.049001] ata2.00: configured for PIO0 [ 1366.985632] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1366.989163] ata2.00: configured for PIO0 [ 1367.892326] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1367.896003] ata2.00: configured for PIO0 [ 1368.795686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1368.799345] ata2.00: configured for PIO0 [ 1369.729014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1369.732296] ata2.00: configured for PIO0 [ 1370.649048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1370.652648] ata2.00: configured for PIO0 [ 1375.654544] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1376.126028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1376.129704] ata2.00: configured for PIO0 [ 1377.082324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1377.085652] ata2.00: configured for PIO0 [ 1377.985648] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1382.989641] ata2.00: failed to set xfermode (err_mask=0x100) [ 1383.459024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1383.462262] ata2.00: configured for PIO0 [ 1384.395672] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1384.399484] ata2.00: configured for PIO0 [ 1389.905660] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1389.908929] ata2.00: configured for PIO0 [ 1390.838969] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1390.842223] ata2.00: configured for PIO0 [ 1391.742327] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1391.745596] ata2.00: configured for PIO0 [ 1392.672294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1392.675538] ata2.00: configured for PIO0 [ 1393.575666] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1393.579027] ata2.00: configured for PIO0 [ 1399.502303] ata2: link is slow to respond, please be patient (ready=0) [ 1403.652305] ata2: softreset failed (device not ready) [ 1404.525668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1404.529008] ata2.00: configured for PIO0 [ 1405.445680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1405.448980] ata2.00: configured for PIO0 [ 1415.496400] ata2: softreset failed (1st FIS failed) [ 1421.398976] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1421.402679] ata2.00: configured for PIO0 [ 1422.305649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1422.308903] ata2.00: configured for PIO0 [ 1423.205657] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1423.209015] ata2.00: configured for PIO0 [ 1424.139001] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1424.142360] ata2.00: configured for PIO0 [ 1425.042356] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1425.045991] ata2.00: configured for PIO0 [ 1425.952330] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1425.955696] ata2.00: configured for PIO0 [ 1426.862317] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1426.865544] ata2.00: configured for PIO0 [ 1432.338978] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1432.342357] ata2.00: configured for PIO0 [ 1433.272324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1433.275775] ata2.00: configured for PIO0 [ 1438.745682] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1438.749034] ata2.00: configured for PIO0 [ 1439.729023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1439.732351] ata2.00: configured for PIO0 [ 1440.652294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1440.655773] ata2.00: configured for PIO0 [ 1441.559012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1441.562637] ata2.00: configured for PIO0 [ 1442.065636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1447.069765] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1447.069772] ata2.00: revalidation failed (errno=-5) [ 1447.538973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1447.542344] ata2.00: configured for PIO0 [ 1448.442320] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1448.446000] ata2.00: configured for PIO0 [ 1449.348989] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1449.352315] ata2.00: configured for PIO0 [ 1454.825620] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1454.829607] ata2.00: configured for PIO0 [ 1455.788987] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1455.792717] ata2.00: configured for PIO0 [ 1456.695637] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1456.698908] ata2.00: configured for PIO0 [ 1457.599016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1457.602598] ata2.00: configured for PIO0 [ 1458.508997] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1458.512359] ata2.00: configured for PIO0 [ 1459.405659] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1459.408959] ata2.00: configured for PIO0 [ 1460.308996] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1460.312357] ata2.00: configured for PIO0 [ 1461.215643] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1461.218887] ata2.00: configured for PIO0 [ 1462.149012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1462.152551] ata2.00: configured for PIO0 [ 1467.662312] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1467.665529] ata2.00: configured for PIO0 [ 1468.565641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1468.569301] ata2.00: configured for PIO0 [ 1468.569351] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1474.225690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1474.229034] ata2.00: configured for PIO0 [ 1479.298951] ata2.00: qc timeout (cmd 0xa0) [ 1479.768985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1479.772343] ata2.00: configured for PIO0 [ 1480.672354] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1485.681513] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1485.681519] ata2.00: revalidation failed (errno=-5) [ 1486.155693] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1486.159803] ata2.00: configured for PIO0 [ 1491.160370] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1501.162973] ata2: softreset failed (1st FIS failed) [ 1501.632348] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1501.635984] ata2.00: configured for PIO0 [ 1502.565638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1502.568992] ata2.00: configured for PIO0 [ 1503.465687] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1503.469007] ata2.00: configured for PIO0 [ 1504.365689] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1504.368971] ata2.00: configured for PIO0 [ 1509.373439] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1509.845660] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1509.848949] ata2.00: configured for PIO0 [ 1510.778961] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1510.782657] ata2.00: configured for PIO0 [ 1511.679013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1511.682281] ata2.00: configured for PIO0 [ 1512.582304] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1512.585594] ata2.00: configured for PIO0 [ 1518.505630] ata2: link is slow to respond, please be patient (ready=0) [ 1522.622276] ata2: softreset failed (device not ready) [ 1523.492302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1523.495627] ata2.00: configured for PIO0 [ 1524.402345] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1524.405689] ata2.00: configured for PIO0 [ 1529.412821] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1529.882309] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1529.885605] ata2.00: configured for PIO0 [ 1534.891716] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1535.365659] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1535.369011] ata2.00: configured for PIO0 [ 1536.298956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1536.302364] ata2.00: configured for PIO0 [ 1537.202344] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1537.205922] ata2.00: configured for PIO0 [ 1538.105629] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1543.115073] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1543.115078] ata2.00: revalidation failed (errno=-5) [ 1543.585642] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1543.588980] ata2.00: configured for PIO0 [ 1544.522301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1544.525554] ata2.00: configured for PIO0 [ 1545.422295] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1545.425580] ata2.00: configured for PIO0 [ 1546.332293] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1546.335552] ata2.00: configured for PIO0 [ 1551.338379] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1551.808990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1551.812223] ata2.00: configured for PIO0 [ 1552.748989] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1552.752577] ata2.00: configured for PIO0 [ 1553.652359] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1553.655690] ata2.00: configured for PIO0 [ 1554.562306] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1554.565574] ata2.00: configured for PIO0 [ 1555.472391] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1555.476053] ata2.00: configured for PIO0 [ 1556.375625] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1556.379157] ata2.00: configured for PIO0 [ 1557.305638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1557.309448] ata2.00: configured for PIO0 [ 1558.208973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1558.212234] ata2.00: configured for PIO0 [ 1564.105624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1564.108915] ata2.00: configured for PIO0 [ 1565.008970] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1565.012267] ata2.00: configured for PIO0 [ 1565.919004] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1565.922328] ata2.00: configured for PIO0 [ 1566.822290] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1566.825519] ata2.00: configured for PIO0 [ 1567.718960] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1567.722289] ata2.00: configured for PIO0 [ 1568.652283] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1568.655611] ata2.00: configured for PIO0 [ 1569.582340] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1569.586239] ata2.00: configured for PIO0 [ 1575.365635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1580.418938] ata2.00: qc timeout (cmd 0xa1) [ 1580.418948] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1580.418950] ata2.00: revalidation failed (errno=-5) [ 1580.888971] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1580.892233] ata2.00: configured for PIO0 [ 1581.792304] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1581.795880] ata2.00: configured for PIO0 [ 1582.698948] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1582.702187] ata2.00: configured for PIO0 [ 1583.605619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1583.608880] ata2.00: configured for PIO0 [ 1584.505620] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1584.508988] ata2.00: configured for PIO0 [ 1590.018942] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1590.022282] ata2.00: configured for PIO0 [ 1590.925678] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1595.928027] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1595.928031] ata2.00: revalidation failed (errno=-5) [ 1596.399019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1596.402627] ata2.00: configured for PIO0 [ 1597.338953] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1597.342233] ata2.00: configured for PIO0 [ 1598.239001] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1598.242289] ata2.00: configured for PIO0 [ 1599.165638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1599.168902] ata2.00: configured for PIO0 [ 1600.062302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1600.065696] ata2.00: configured for PIO0 [ 1600.965610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1600.968939] ata2.00: configured for PIO0 [ 1601.885664] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1601.889012] ata2.00: configured for PIO0 [ 1602.788985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1602.792321] ata2.00: configured for PIO0 [ 1603.695620] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1603.698952] ata2.00: configured for PIO0 [ 1608.702169] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1609.172299] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1609.175558] ata2.00: configured for PIO0 [ 1610.098964] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1610.102299] ata2.00: configured for PIO0 [ 1611.032319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1611.035989] ata2.00: configured for PIO0 [ 1611.938941] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1611.942207] ata2.00: configured for PIO0 [ 1616.945446] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1617.415617] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1617.419119] ata2.00: configured for PIO0 [ 1618.345672] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1618.349329] ata2.00: configured for PIO0 [ 1618.822348] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1618.825933] ata2.00: configured for PIO0 [ 1619.782333] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1619.785626] ata2.00: configured for PIO0 [ 1620.712368] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1620.715666] ata2.00: configured for PIO0 [ 1621.615606] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1621.618938] ata2.00: configured for PIO0 [ 1622.515639] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1622.518956] ata2.00: configured for PIO0 [ 1623.425610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1623.428883] ata2.00: configured for PIO0 [ 1624.338973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1629.340356] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1629.340361] ata2.00: revalidation failed (errno=-5) [ 1629.812277] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1629.815536] ata2.00: configured for PIO0 [ 1630.719013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1630.722280] ata2.00: configured for PIO0 [ 1631.625667] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1631.629388] ata2.00: configured for PIO0 [ 1632.525616] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1632.528964] ata2.00: configured for PIO0 [ 1633.462353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1633.465930] ata2.00: configured for PIO0 [ 1638.471850] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1638.945618] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1638.948951] ata2.00: configured for PIO0 [ 1639.885602] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1639.888829] ata2.00: configured for PIO0 [ 1640.785671] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1640.789320] ata2.00: configured for PIO0 [ 1641.688944] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1641.692193] ata2.00: configured for PIO0 [ 1642.618954] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1642.622280] ata2.00: configured for PIO0 [ 1643.518976] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1643.522305] ata2.00: configured for PIO0 [ 1644.422308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1644.425627] ata2.00: configured for PIO0 [ 1645.338971] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1645.342652] ata2.00: configured for PIO0 [ 1646.255653] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1646.259001] ata2.00: configured for PIO0 [ 1651.778985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1651.782285] ata2.00: configured for PIO0 [ 1652.712336] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1652.715683] ata2.00: configured for PIO0 [ 1653.618992] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1653.622372] ata2.00: configured for PIO0 [ 1654.552345] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1654.555644] ata2.00: configured for PIO0 [ 1655.459005] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1655.462618] ata2.00: configured for PIO0 [ 1656.372274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1656.375611] ata2.00: configured for PIO0 [ 1657.265673] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1657.269464] ata2.00: configured for PIO0 [ 1662.805603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1662.808867] ata2.00: configured for PIO0 [ 1663.708981] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1668.720572] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1668.720576] ata2.00: revalidation failed (errno=-5) [ 1669.188940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1669.192455] ata2.00: configured for PIO0 [ 1670.115683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1670.119024] ata2.00: configured for PIO0 [ 1671.052275] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1671.055653] ata2.00: configured for PIO0 [ 1671.982328] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1671.985707] ata2.00: configured for PIO0 [ 1672.888940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1672.892308] ata2.00: configured for PIO0 [ 1673.788983] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1673.792684] ata2.00: configured for PIO0 [ 1674.695624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1679.832290] ata2.00: qc timeout (cmd 0xa1) [ 1679.832299] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1679.832302] ata2.00: revalidation failed (errno=-5) [ 1680.302335] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1680.305982] ata2.00: configured for PIO0 [ 1681.205630] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1681.208903] ata2.00: configured for PIO0 [ 1682.125606] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1682.128873] ata2.00: configured for PIO0 [ 1683.038943] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1683.042273] ata2.00: configured for PIO0 [ 1683.935662] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1683.939310] ata2.00: configured for PIO0 [ 1689.838939] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1689.842201] ata2.00: configured for PIO0 [ 1699.876466] ata2: softreset failed (1st FIS failed) [ 1705.755635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1705.758936] ata2.00: configured for PIO0 [ 1706.692309] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1706.695901] ata2.00: configured for PIO0 [ 1707.618985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1707.622823] ata2.00: configured for PIO0 [ 1708.522265] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1708.525492] ata2.00: configured for PIO0 [ 1709.428962] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1709.432226] ata2.00: configured for PIO0 [ 1710.332291] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1710.335708] ata2.00: configured for PIO0 [ 1711.248933] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1711.252210] ata2.00: configured for PIO0 [ 1712.155649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1712.158957] ata2.00: configured for PIO0 [ 1713.062316] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1713.065599] ata2.00: configured for PIO0 [ 1713.968934] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1713.972185] ata2.00: configured for PIO0 [ 1714.878931] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1714.882206] ata2.00: configured for PIO0 [ 1720.658977] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1725.699007] ata2.00: qc timeout (cmd 0xa1) [ 1725.699019] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1725.699021] ata2.00: revalidation failed (errno=-5) [ 1726.168938] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1726.172277] ata2.00: configured for PIO0 [ 1727.082284] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1727.085619] ata2.00: configured for PIO0 [ 1728.015670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1728.019312] ata2.00: configured for PIO0 [ 1728.922267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1728.925493] ata2.00: configured for PIO0 [ 1729.828991] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1729.832278] ata2.00: configured for PIO0 [ 1730.732272] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1730.735640] ata2.00: configured for PIO0 [ 1731.638946] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1731.642210] ata2.00: configured for PIO0 [ 1732.548978] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1732.552325] ata2.00: configured for PIO0 [ 1738.055629] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1743.060045] ata2.00: failed to set xfermode (err_mask=0x100) [ 1743.528933] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1743.532625] ata2.00: configured for PIO0 [ 1744.428929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1744.432199] ata2.00: configured for PIO0 [ 1745.362269] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1745.365607] ata2.00: configured for PIO0 [ 1746.298974] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1746.302273] ata2.00: configured for PIO0 [ 1751.805624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1751.808973] ata2.00: configured for PIO0 [ 1752.715619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1752.718880] ata2.00: configured for PIO0 [ 1753.642264] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1753.645649] ata2.00: configured for PIO0 [ 1754.545703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1754.549046] ata2.00: configured for PIO0 [ 1760.048943] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1760.052586] ata2.00: configured for PIO0 [ 1765.165629] ata2.00: qc timeout (cmd 0xef) [ 1765.165638] ata2.00: failed to enable DIPM, Emask 0x5 [ 1765.635603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1765.638822] ata2.00: configured for PIO0 [ 1766.565615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1766.568894] ata2.00: configured for PIO0 [ 1767.465609] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1767.468931] ata2.00: configured for PIO0 [ 1768.378985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1768.382559] ata2.00: configured for PIO0 [ 1769.292268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1769.295539] ata2.00: configured for PIO0 [ 1775.045594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1780.098985] ata2.00: qc timeout (cmd 0xa1) [ 1780.098996] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1780.098998] ata2.00: revalidation failed (errno=-5) [ 1780.572283] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1780.575921] ata2.00: configured for PIO0 [ 1786.082263] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1786.085940] ata2.00: configured for PIO0 [ 1786.985638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1786.989308] ata2.00: configured for PIO0 [ 1787.922281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1787.925552] ata2.00: configured for PIO0 [ 1788.822329] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1788.825717] ata2.00: configured for PIO0 [ 1789.725630] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1794.735424] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1794.735428] ata2.00: revalidation failed (errno=-5) [ 1795.205599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1795.208866] ata2.00: configured for PIO0 [ 1796.118949] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1796.122182] ata2.00: configured for PIO0 [ 1797.028973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1797.032295] ata2.00: configured for PIO0 [ 1797.928937] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1797.932216] ata2.00: configured for PIO0 [ 1803.462322] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1803.465582] ata2.00: configured for PIO0 [ 1808.965598] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1808.968937] ata2.00: configured for PIO0 [ 1809.865608] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1814.874645] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1814.874650] ata2.00: revalidation failed (errno=-5) [ 1815.348938] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1815.352406] ata2.00: configured for PIO0 [ 1816.252719] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1816.256017] ata2.00: configured for PIO0 [ 1817.158956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1817.162279] ata2.00: configured for PIO0 [ 1822.658935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1822.662328] ata2.00: configured for PIO0 [ 1823.595610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1823.598971] ata2.00: configured for PIO0 [ 1824.502320] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1824.506422] ata2.00: configured for PIO0 [ 1825.402268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1830.445604] ata2.00: qc timeout (cmd 0xa1) [ 1830.445614] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1830.445617] ata2.00: revalidation failed (errno=-5) [ 1830.918948] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1830.922278] ata2.00: configured for PIO0 [ 1831.878927] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1831.882281] ata2.00: configured for PIO0 [ 1832.778970] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1832.782646] ata2.00: configured for PIO0 [ 1833.678930] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1833.682164] ata2.00: configured for PIO0 [ 1834.585611] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1834.588875] ata2.00: configured for PIO0 [ 1839.594625] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1840.065636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1840.068926] ata2.00: configured for PIO0 [ 1841.025594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1846.031611] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1846.031616] ata2.00: revalidation failed (errno=-5) [ 1846.502308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1846.505957] ata2.00: configured for PIO0 [ 1852.019106] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1852.022452] ata2.00: configured for PIO0 [ 1852.922259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1852.925493] ata2.00: configured for PIO0 [ 1853.825618] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1853.828953] ata2.00: configured for PIO0 [ 1854.735699] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1854.739286] ata2.00: configured for PIO0 [ 1855.638919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1855.642258] ata2.00: configured for PIO0 [ 1856.572294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1856.575637] ata2.00: configured for PIO0 [ 1857.485589] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1857.488924] ata2.00: configured for PIO0 [ 1858.388969] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1858.392655] ata2.00: configured for PIO0 [ 1859.292295] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1859.295948] ata2.00: configured for PIO0 [ 1860.198920] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1860.202175] ata2.00: configured for PIO0 [ 1861.102317] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1861.106225] ata2.00: configured for PIO0 [ 1862.002305] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1862.005997] ata2.00: configured for PIO0 [ 1862.912259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1862.915516] ata2.00: configured for PIO0 [ 1863.838932] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1863.842200] ata2.00: configured for PIO0 [ 1864.732276] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1869.733642] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1869.733647] ata2.00: revalidation failed (errno=-5) [ 1870.202258] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1870.205569] ata2.00: configured for PIO0 [ 1871.102312] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1871.105646] ata2.00: configured for PIO0 [ 1872.008942] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1872.012557] ata2.00: configured for PIO0 [ 1872.952253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1872.955508] ata2.00: configured for PIO0 [ 1878.455636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1878.459315] ata2.00: configured for PIO0 [ 1879.365591] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1879.368848] ata2.00: configured for PIO0 [ 1880.268957] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1880.272205] ata2.00: configured for PIO0 [ 1881.175636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1886.181842] ata2.00: configured for PIO0 [ 1887.082252] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1887.085519] ata2.00: configured for PIO0 [ 1887.985627] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1887.989278] ata2.00: configured for PIO0 [ 1888.885655] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1888.889186] ata2.00: configured for PIO0 [ 1889.785744] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1889.789265] ata2.00: configured for PIO0 [ 1890.698948] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1890.702598] ata2.00: configured for PIO0 [ 1891.608919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1891.612282] ata2.00: configured for PIO0 [ 1892.522268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1892.525545] ata2.00: configured for PIO0 [ 1893.425639] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1893.429267] ata2.00: configured for PIO0 [ 1894.358911] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1894.362174] ata2.00: configured for PIO0 [ 1895.268968] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1895.272317] ata2.00: configured for PIO0 [ 1900.775638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1900.779292] ata2.00: configured for PIO0 [ 1901.678922] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1901.682282] ata2.00: configured for PIO0 [ 1902.582306] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1902.585955] ata2.00: configured for PIO0 [ 1903.478952] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1908.485220] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1908.485225] ata2.00: revalidation failed (errno=-5) [ 1908.958922] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1908.962188] ata2.00: configured for PIO0 [ 1913.964130] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1914.432272] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1914.435640] ata2.00: configured for PIO0 [ 1915.365619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1915.368867] ata2.00: configured for PIO0 [ 1916.272280] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1916.275545] ata2.00: configured for PIO0 [ 1917.172301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1917.175604] ata2.00: configured for PIO0 [ 1918.085584] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1918.088938] ata2.00: configured for PIO0 [ 1923.585628] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1923.588992] ata2.00: configured for PIO0 [ 1924.485629] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1924.488938] ata2.00: configured for PIO0 [ 1925.405587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1925.408818] ata2.00: configured for PIO0 [ 1926.308947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1926.312277] ata2.00: configured for PIO0 [ 1927.212258] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1927.215543] ata2.00: configured for PIO0 [ 1928.138962] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1928.142341] ata2.00: configured for PIO0 [ 1929.045573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1929.048856] ata2.00: configured for PIO0 [ 1929.948975] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1929.952299] ata2.00: configured for PIO0 [ 1930.875627] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1930.878935] ata2.00: configured for PIO0 [ 1931.775647] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1931.779288] ata2.00: configured for PIO0 [ 1932.685578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1932.689230] ata2.00: configured for PIO0 [ 1938.465601] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1943.512291] ata2.00: qc timeout (cmd 0xa1) [ 1943.512301] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1943.512303] ata2.00: revalidation failed (errno=-5) [ 1943.985324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1943.988632] ata2.00: configured for PIO0 [ 1944.895656] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1944.898990] ata2.00: configured for PIO0 [ 1945.798968] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1950.809590] ata2.00: failed to set xfermode (err_mask=0x100) [ 1951.282274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1956.288508] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1956.288513] ata2.00: revalidation failed (errno=-5) [ 1956.762882] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1956.766120] ata2.00: configured for PIO0 [ 1962.308941] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1962.312372] ata2.00: configured for PIO0 [ 1963.205591] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1963.208862] ata2.00: configured for PIO0 [ 1964.112289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1964.115895] ata2.00: configured for PIO0 [ 1965.045653] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1965.048925] ata2.00: configured for PIO0 [ 1965.952259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1965.955539] ata2.00: configured for PIO0 [ 1966.855591] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1966.859587] ata2.00: configured for PIO0 [ 1967.795592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1967.798893] ata2.00: configured for PIO0 [ 1968.692243] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1973.703298] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 1973.703303] ata2.00: revalidation failed (errno=-5) [ 1974.172242] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1974.175581] ata2.00: configured for PIO0 [ 1974.675584] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1974.678810] ata2.00: configured for PIO0 [ 1980.188916] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1980.192766] ata2.00: configured for PIO0 [ 1981.095574] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1981.098931] ata2.00: configured for PIO0 [ 1982.015599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1982.018983] ata2.00: configured for PIO0 [ 1982.918961] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1982.922559] ata2.00: configured for PIO0 [ 1983.852253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1983.855950] ata2.00: configured for PIO0 [ 1984.752272] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1984.755510] ata2.00: configured for PIO0 [ 1985.655592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1985.658976] ata2.00: configured for PIO0 [ 1986.568931] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1986.572237] ata2.00: configured for PIO0 [ 1987.465596] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1987.468869] ata2.00: configured for PIO0 [ 1992.475306] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1992.945630] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1992.948873] ata2.00: configured for PIO0 [ 1997.954240] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 1998.422282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1998.426053] ata2.00: configured for PIO0 [ 1999.355617] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1999.359227] ata2.00: configured for PIO0 [ 2000.255573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2000.258925] ata2.00: configured for PIO0 [ 2001.172234] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2006.177596] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2006.177601] ata2.00: revalidation failed (errno=-5) [ 2006.645586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2006.648904] ata2.00: configured for PIO0 [ 2012.445570] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2017.538968] ata2.00: qc timeout (cmd 0xa1) [ 2017.538983] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2017.538986] ata2.00: revalidation failed (errno=-5) [ 2018.008934] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2018.012156] ata2.00: configured for PIO0 [ 2018.915601] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2018.918932] ata2.00: configured for PIO0 [ 2019.815595] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2019.818933] ata2.00: configured for PIO0 [ 2025.338935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2025.342264] ata2.00: configured for PIO0 [ 2031.152293] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2036.312274] ata2.00: qc timeout (cmd 0xa1) [ 2036.312285] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2036.312287] ata2.00: revalidation failed (errno=-5) [ 2036.782252] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2036.785518] ata2.00: configured for PIO0 [ 2042.702271] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2042.706120] ata2.00: configured for PIO0 [ 2043.612230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2043.615530] ata2.00: configured for PIO0 [ 2044.512270] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2044.515886] ata2.00: configured for PIO0 [ 2055.018945] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2055.022244] ata2.00: configured for PIO0 [ 2055.948916] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2055.952264] ata2.00: configured for PIO0 [ 2056.878925] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2056.882185] ata2.00: configured for PIO0 [ 2057.785622] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2057.789243] ata2.00: configured for PIO0 [ 2058.715605] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2058.718837] ata2.00: configured for PIO0 [ 2059.622271] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2059.625853] ata2.00: configured for PIO0 [ 2060.532230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2060.535467] ata2.00: configured for PIO0 [ 2061.472304] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2061.475608] ata2.00: configured for PIO0 [ 2062.378923] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2062.382255] ata2.00: configured for PIO0 [ 2067.852236] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2067.855573] ata2.00: configured for PIO0 [ 2068.788973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2068.792432] ata2.00: configured for PIO0 [ 2069.698992] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2069.702335] ata2.00: configured for PIO0 [ 2070.612232] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2070.615495] ata2.00: configured for PIO0 [ 2076.145592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2076.148965] ata2.00: configured for PIO0 [ 2077.045562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2077.048806] ata2.00: configured for PIO0 [ 2082.562246] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2082.565562] ata2.00: configured for PIO0 [ 2083.475591] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2083.478835] ata2.00: configured for PIO0 [ 2084.408895] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2084.412247] ata2.00: configured for PIO0 [ 2089.419249] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2089.888907] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2089.892137] ata2.00: configured for PIO0 [ 2090.822311] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2090.825696] ata2.00: configured for PIO0 [ 2091.718910] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2091.722138] ata2.00: configured for PIO0 [ 2092.622288] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2092.625986] ata2.00: configured for PIO0 [ 2093.528897] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2093.532607] ata2.00: configured for PIO0 [ 2094.455630] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2094.459425] ata2.00: failed to set xfermode (err_mask=0x1) [ 2099.932239] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2099.935513] ata2.00: configured for PIO0 [ 2105.445573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2105.448909] ata2.00: configured for PIO0 [ 2106.372227] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2106.375553] ata2.00: configured for PIO0 [ 2107.268956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2107.272516] ata2.00: configured for PIO0 [ 2108.198900] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2108.202224] ata2.00: configured for PIO0 [ 2109.102307] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2109.105636] ata2.00: configured for PIO0 [ 2110.005564] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2110.009275] ata2.00: configured for PIO0 [ 2110.925571] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2115.935613] ata2.00: failed to set xfermode (err_mask=0x100) [ 2116.405562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2116.408826] ata2.00: configured for PIO0 [ 2117.328924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2117.332270] ata2.00: configured for PIO0 [ 2118.232259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2118.235498] ata2.00: configured for PIO0 [ 2119.135613] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2119.138945] ata2.00: configured for PIO0 [ 2120.042231] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2120.045503] ata2.00: configured for PIO0 [ 2120.972243] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2120.975595] ata2.00: configured for PIO0 [ 2121.872291] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2121.875621] ata2.00: configured for PIO0 [ 2127.305580] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2132.315597] ata2.00: qc timeout (cmd 0xa1) [ 2132.315608] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2132.315610] ata2.00: revalidation failed (errno=-5) [ 2132.785617] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2132.789302] ata2.00: configured for PIO0 [ 2133.688916] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2133.692246] ata2.00: configured for PIO0 [ 2134.615586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2134.618964] ata2.00: configured for PIO0 [ 2140.095595] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2140.098940] ata2.00: configured for PIO0 [ 2141.025639] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2141.029229] ata2.00: configured for PIO0 [ 2146.935594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2146.938963] ata2.00: configured for PIO0 [ 2147.845557] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2147.848830] ata2.00: configured for PIO0 [ 2153.358901] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2153.362236] ata2.00: configured for PIO0 [ 2154.285565] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2154.289175] ata2.00: configured for PIO0 [ 2155.195619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2155.198948] ata2.00: configured for PIO0 [ 2156.095581] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2156.098890] ata2.00: configured for PIO0 [ 2161.628934] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2161.632620] ata2.00: configured for PIO0 [ 2162.555550] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2162.558821] ata2.00: configured for PIO0 [ 2163.452222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2163.455493] ata2.00: configured for PIO0 [ 2164.358926] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2164.362215] ata2.00: configured for PIO0 [ 2165.272246] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2165.275511] ata2.00: configured for PIO0 [ 2170.275735] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2170.748932] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2170.752210] ata2.00: configured for PIO0 [ 2171.682237] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2171.685586] ata2.00: configured for PIO0 [ 2172.612229] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2172.615510] ata2.00: configured for PIO0 [ 2173.528897] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2173.532316] ata2.00: configured for PIO0 [ 2178.539023] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2179.008882] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2179.012141] ata2.00: configured for PIO0 [ 2179.948923] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2179.952563] ata2.00: configured for PIO0 [ 2185.748935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2190.768892] ata2.00: qc timeout (cmd 0xa1) [ 2190.768902] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2190.768904] ata2.00: revalidation failed (errno=-5) [ 2191.238917] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2191.242148] ata2.00: configured for PIO0 [ 2192.142262] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2192.146061] ata2.00: configured for PIO0 [ 2197.652266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2197.655578] ata2.00: configured for PIO0 [ 2198.562221] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2198.565482] ata2.00: configured for PIO0 [ 2204.075551] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2204.078909] ata2.00: configured for PIO0 [ 2209.582272] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2209.585573] ata2.00: configured for PIO0 [ 2215.095571] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2215.099114] ata2.00: configured for PIO0 [ 2216.005556] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2216.008795] ata2.00: configured for PIO0 [ 2221.508935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2221.512266] ata2.00: configured for PIO0 [ 2222.412311] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2222.415939] ata2.00: configured for PIO0 [ 2223.315584] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2223.318996] ata2.00: configured for PIO0 [ 2228.328350] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2228.798915] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2228.802177] ata2.00: configured for PIO0 [ 2234.345590] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2234.349170] ata2.00: configured for PIO0 [ 2235.245551] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2235.248820] ata2.00: configured for PIO0 [ 2236.148959] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2236.152298] ata2.00: configured for PIO0 [ 2237.055563] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2237.058847] ata2.00: configured for PIO0 [ 2237.962221] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2237.965451] ata2.00: configured for PIO0 [ 2238.858934] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2238.862233] ata2.00: configured for PIO0 [ 2239.792266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2239.795611] ata2.00: configured for PIO0 [ 2240.698913] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2240.702220] ata2.00: configured for PIO0 [ 2241.605575] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2241.608841] ata2.00: configured for PIO0 [ 2242.512220] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2242.515473] ata2.00: configured for PIO0 [ 2243.418910] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2243.422517] ata2.00: configured for PIO0 [ 2244.325569] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2244.328879] ata2.00: configured for PIO0 [ 2245.228917] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2245.232197] ata2.00: configured for PIO0 [ 2246.135587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2246.139286] ata2.00: configured for PIO0 [ 2247.068946] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2247.072807] ata2.00: configured for PIO0 [ 2247.975593] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2247.978947] ata2.00: configured for PIO0 [ 2248.908935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2248.912575] ata2.00: configured for PIO0 [ 2249.822255] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2249.826406] ata2.00: configured for PIO0 [ 2250.748921] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2250.752356] ata2.00: configured for PIO0 [ 2251.678875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2251.682207] ata2.00: configured for PIO0 [ 2252.578919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2252.582706] ata2.00: configured for PIO0 [ 2253.485660] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2253.489079] ata2.00: configured for PIO0 [ 2263.519440] ata2: softreset failed (1st FIS failed) [ 2269.425555] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2274.605562] ata2.00: qc timeout (cmd 0xa1) [ 2274.605574] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2274.605576] ata2.00: revalidation failed (errno=-5) [ 2275.075586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2275.078866] ata2.00: configured for PIO0 [ 2276.008875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2276.012217] ata2.00: configured for PIO0 [ 2276.908887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2276.912238] ata2.00: configured for PIO0 [ 2277.818928] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2282.828189] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2282.828194] ata2.00: revalidation failed (errno=-5) [ 2283.302275] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2283.305673] ata2.00: configured for PIO0 [ 2284.205593] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2284.208933] ata2.00: configured for PIO0 [ 2285.102274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2285.105617] ata2.00: configured for PIO0 [ 2286.012221] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2286.015557] ata2.00: configured for PIO0 [ 2286.915557] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2286.918797] ata2.00: configured for PIO0 [ 2296.945710] ata2: softreset failed (1st FIS failed) [ 2302.848878] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2302.852129] ata2.00: configured for PIO0 [ 2308.325541] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2308.329205] ata2.00: configured for PIO0 [ 2313.868887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2313.872144] ata2.00: configured for PIO0 [ 2314.808879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2314.812112] ata2.00: configured for PIO0 [ 2319.813435] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2320.282217] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2320.285574] ata2.00: configured for PIO0 [ 2321.222205] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2321.225439] ata2.00: configured for PIO0 [ 2322.152230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2322.155531] ata2.00: configured for PIO0 [ 2323.072261] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2323.075608] ata2.00: configured for PIO0 [ 2324.005607] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2324.009151] ata2.00: configured for PIO0 [ 2324.938896] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2324.942152] ata2.00: configured for PIO0 [ 2325.842247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2325.845549] ata2.00: configured for PIO0 [ 2335.875774] ata2: softreset failed (1st FIS failed) [ 2336.748880] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2341.759087] ata2.00: failed to set xfermode (err_mask=0x100) [ 2342.228875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2342.232156] ata2.00: configured for PIO0 [ 2347.238036] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2347.712228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2347.715727] ata2.00: configured for PIO0 [ 2348.642263] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2348.645609] ata2.00: configured for PIO0 [ 2349.545533] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2349.548803] ata2.00: configured for PIO0 [ 2350.448933] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2350.452565] ata2.00: configured for PIO0 [ 2360.822215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2365.912217] ata2.00: qc timeout (cmd 0xa1) [ 2365.912230] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2365.912233] ata2.00: revalidation failed (errno=-5) [ 2366.382208] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2366.385465] ata2.00: configured for PIO0 [ 2371.898881] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2371.902149] ata2.00: configured for PIO0 [ 2372.802266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2372.805590] ata2.00: configured for PIO0 [ 2373.708900] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2373.712255] ata2.00: configured for PIO0 [ 2374.612227] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2374.615549] ata2.00: configured for PIO0 [ 2375.515564] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2375.518892] ata2.00: configured for PIO0 [ 2376.418875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2381.428918] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2381.428923] ata2.00: revalidation failed (errno=-5) [ 2381.898881] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2381.902140] ata2.00: configured for PIO0 [ 2382.825532] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2382.828889] ata2.00: configured for PIO0 [ 2383.722248] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2383.725775] ata2.00: configured for PIO0 [ 2384.628873] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2384.632216] ata2.00: configured for PIO0 [ 2385.532225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2385.535459] ata2.00: configured for PIO0 [ 2386.438895] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2386.442235] ata2.00: configured for PIO0 [ 2387.375539] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2387.378870] ata2.00: configured for PIO0 [ 2388.278928] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2393.284985] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2393.284991] ata2.00: revalidation failed (errno=-5) [ 2398.645600] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2403.672210] ata2.00: qc timeout (cmd 0xa1) [ 2403.672220] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2403.672223] ata2.00: revalidation failed (errno=-5) [ 2404.142204] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2404.145491] ata2.00: configured for PIO0 [ 2405.075552] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2405.078953] ata2.00: configured for PIO0 [ 2405.988863] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2405.992426] ata2.00: configured for PIO0 [ 2406.898860] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2406.902127] ata2.00: configured for PIO0 [ 2407.808887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2407.812123] ata2.00: configured for PIO0 [ 2407.812156] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2413.315556] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2413.318892] ata2.00: configured for PIO0 [ 2414.288967] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2414.292233] ata2.00: configured for PIO0 [ 2415.185558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2415.188917] ata2.00: configured for PIO0 [ 2416.105527] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2416.108811] ata2.00: configured for PIO0 [ 2421.608877] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2421.612144] ata2.00: configured for PIO0 [ 2422.535560] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2422.539013] ata2.00: configured for PIO0 [ 2423.438886] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2423.442198] ata2.00: configured for PIO0 [ 2428.443895] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2428.912224] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2428.915651] ata2.00: configured for PIO0 [ 2429.842215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2429.845474] ata2.00: configured for PIO0 [ 2430.745558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2430.748812] ata2.00: configured for PIO0 [ 2431.645548] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2431.649106] ata2.00: configured for PIO0 [ 2432.552244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2432.555901] ata2.00: configured for PIO0 [ 2433.462298] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2433.465646] ata2.00: configured for PIO0 [ 2434.382219] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2434.385490] ata2.00: configured for PIO0 [ 2435.285561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2440.289968] ata2.00: failed to set xfermode (err_mask=0x100) [ 2440.762242] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2440.765517] ata2.00: configured for PIO0 [ 2441.692221] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2441.695581] ata2.00: configured for PIO0 [ 2442.622244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2442.625936] ata2.00: configured for PIO0 [ 2443.528853] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2443.532137] ata2.00: configured for PIO0 [ 2444.459088] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2444.462586] ata2.00: configured for PIO0 [ 2445.358902] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2445.362507] ata2.00: configured for PIO0 [ 2446.288878] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2446.292253] ata2.00: configured for PIO0 [ 2451.805554] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2451.808976] ata2.00: configured for PIO0 [ 2452.715596] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2457.724742] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2457.724746] ata2.00: revalidation failed (errno=-5) [ 2458.195558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2458.199133] ata2.00: configured for PIO0 [ 2459.098874] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2459.102247] ata2.00: configured for PIO0 [ 2460.005603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2460.009358] ata2.00: configured for PIO0 [ 2460.905555] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2460.908852] ata2.00: configured for PIO0 [ 2461.808891] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2461.812239] ata2.00: configured for PIO0 [ 2462.745545] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2462.748811] ata2.00: configured for PIO0 [ 2463.652219] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2463.655910] ata2.00: configured for PIO0 [ 2464.562189] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2464.565417] ata2.00: configured for PIO0 [ 2465.488944] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2465.492299] ata2.00: configured for PIO0 [ 2466.395535] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2466.398914] ata2.00: configured for PIO0 [ 2467.295612] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2467.299180] ata2.00: configured for PIO0 [ 2468.195526] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2468.198866] ata2.00: configured for PIO0 [ 2469.105520] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2469.108791] ata2.00: configured for PIO0 [ 2470.008927] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2470.012688] ata2.00: configured for PIO0 [ 2470.908855] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2470.912119] ata2.00: configured for PIO0 [ 2471.805565] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2471.809268] ata2.00: configured for PIO0 [ 2472.712218] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2472.715556] ata2.00: configured for PIO0 [ 2473.648910] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2473.652156] ata2.00: configured for PIO0 [ 2474.578870] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2474.582228] ata2.00: configured for PIO0 [ 2475.478886] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2475.482230] ata2.00: configured for PIO0 [ 2476.418878] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2476.422157] ata2.00: configured for PIO0 [ 2477.322251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2477.325866] ata2.00: configured for PIO0 [ 2478.222203] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2478.225544] ata2.00: configured for PIO0 [ 2479.122244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2479.126045] ata2.00: configured for PIO0 [ 2480.032192] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2480.035543] ata2.00: configured for PIO0 [ 2480.938883] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2485.947705] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2485.947711] ata2.00: revalidation failed (errno=-5) [ 2486.415533] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2486.418853] ata2.00: configured for PIO0 [ 2487.322281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2492.324843] ata2.00: failed to set xfermode (err_mask=0x100) [ 2492.795515] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2492.798773] ata2.00: configured for PIO0 [ 2493.732232] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2493.735542] ata2.00: configured for PIO0 [ 2494.668854] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2494.672252] ata2.00: configured for PIO0 [ 2500.188875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2500.192190] ata2.00: configured for PIO0 [ 2505.705550] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2505.708866] ata2.00: configured for PIO0 [ 2511.188876] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2511.192139] ata2.00: configured for PIO0 [ 2516.695590] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2516.698895] ata2.00: configured for PIO0 [ 2517.598899] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2517.602728] ata2.00: configured for PIO0 [ 2518.502190] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2518.505409] ata2.00: configured for PIO0 [ 2519.405567] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2519.409041] ata2.00: configured for PIO0 [ 2524.878874] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2524.882584] ata2.00: configured for PIO0 [ 2530.378850] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2530.382110] ata2.00: configured for PIO0 [ 2531.312186] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2531.315460] ata2.00: configured for PIO0 [ 2532.242247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2532.245856] ata2.00: configured for PIO0 [ 2533.142223] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2533.145829] ata2.00: configured for PIO0 [ 2538.952203] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2544.045581] ata2.00: qc timeout (cmd 0xa1) [ 2544.045593] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2544.045595] ata2.00: revalidation failed (errno=-5) [ 2549.528978] ata2: link is slow to respond, please be patient (ready=0) [ 2554.098893] ata2: softreset failed (device not ready) [ 2554.575569] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2554.578860] ata2.00: configured for PIO0 [ 2555.482208] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2560.487135] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2560.487141] ata2.00: revalidation failed (errno=-5) [ 2560.955538] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2560.959214] ata2.00: configured for PIO0 [ 2561.885560] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2561.888857] ata2.00: configured for PIO0 [ 2562.792202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2562.795517] ata2.00: configured for PIO0 [ 2563.695564] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2563.698853] ata2.00: configured for PIO0 [ 2564.598895] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2569.608717] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2569.608722] ata2.00: revalidation failed (errno=-5) [ 2570.078934] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2570.082459] ata2.00: configured for PIO0 [ 2570.982250] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2570.985586] ata2.00: configured for PIO0 [ 2571.888872] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2571.892198] ata2.00: configured for PIO0 [ 2572.802216] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2572.805534] ata2.00: configured for PIO0 [ 2573.728908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2578.740273] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2578.740278] ata2.00: revalidation failed (errno=-5) [ 2579.208877] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2579.212519] ata2.00: configured for PIO0 [ 2580.152201] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2580.155461] ata2.00: configured for PIO0 [ 2581.058895] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2581.062191] ata2.00: configured for PIO0 [ 2581.972192] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2581.975535] ata2.00: configured for PIO0 [ 2582.872263] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2582.875550] ata2.00: configured for PIO0 [ 2583.768894] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2583.772549] ata2.00: configured for PIO0 [ 2589.538875] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2594.605584] ata2.00: qc timeout (cmd 0xa1) [ 2594.605594] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2594.605596] ata2.00: revalidation failed (errno=-5) [ 2595.075545] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2595.078905] ata2.00: configured for PIO0 [ 2595.982182] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2595.985506] ata2.00: configured for PIO0 [ 2596.885522] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2596.888797] ata2.00: configured for PIO0 [ 2597.792174] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2597.795543] ata2.00: configured for PIO0 [ 2598.698858] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2598.702192] ata2.00: configured for PIO0 [ 2599.602245] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2599.605898] ata2.00: configured for PIO0 [ 2600.505557] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2600.508857] ata2.00: configured for PIO0 [ 2601.405561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2601.409234] ata2.00: configured for PIO0 [ 2606.882202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2606.885839] ata2.00: configured for PIO0 [ 2612.422188] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2612.425449] ata2.00: configured for PIO0 [ 2613.325780] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2613.329064] ata2.00: configured for PIO0 [ 2614.255577] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2614.259420] ata2.00: configured for PIO0 [ 2615.158882] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2615.162192] ata2.00: configured for PIO0 [ 2616.098854] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2621.104661] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2621.104667] ata2.00: revalidation failed (errno=-5) [ 2621.575519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2621.578855] ata2.00: configured for PIO0 [ 2622.485559] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2622.488853] ata2.00: configured for PIO0 [ 2627.998876] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2628.002580] ata2.00: configured for PIO0 [ 2628.935527] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2628.938894] ata2.00: configured for PIO0 [ 2629.835516] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2629.838919] ata2.00: configured for PIO0 [ 2630.755577] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2630.758891] ata2.00: configured for PIO0 [ 2636.585514] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2641.752184] ata2.00: qc timeout (cmd 0xa1) [ 2641.752197] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2641.752199] ata2.00: revalidation failed (errno=-5) [ 2642.222202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2642.225465] ata2.00: configured for PIO0 [ 2647.738857] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2647.742472] ata2.00: configured for PIO0 [ 2648.672270] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2648.675876] ata2.00: configured for PIO0 [ 2649.575575] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2649.578889] ata2.00: configured for PIO0 [ 2654.587026] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2655.055545] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2655.058888] ata2.00: configured for PIO0 [ 2655.985506] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2655.988740] ata2.00: configured for PIO0 [ 2656.885530] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2656.889178] ata2.00: configured for PIO0 [ 2662.405563] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2662.408905] ata2.00: configured for PIO0 [ 2663.305524] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2663.308768] ata2.00: configured for PIO0 [ 2664.228848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2664.232080] ata2.00: configured for PIO0 [ 2665.128891] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2665.132179] ata2.00: configured for PIO0 [ 2666.035517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2666.038782] ata2.00: configured for PIO0 [ 2666.938876] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2666.942199] ata2.00: configured for PIO0 [ 2667.838886] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2667.842276] ata2.00: configured for PIO0 [ 2668.775530] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2668.778885] ata2.00: configured for PIO0 [ 2669.698885] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2669.702443] ata2.00: configured for PIO0 [ 2670.595571] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2670.599002] ata2.00: configured for PIO0 [ 2671.502179] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2671.505766] ata2.00: configured for PIO0 [ 2672.428848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2672.432484] ata2.00: configured for PIO0 [ 2673.332230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2673.335804] ata2.00: configured for PIO0 [ 2674.265503] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2674.268855] ata2.00: configured for PIO0 [ 2675.195515] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2675.198873] ata2.00: configured for PIO0 [ 2676.098843] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2676.102063] ata2.00: configured for PIO0 [ 2676.998878] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2682.001662] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2682.001667] ata2.00: revalidation failed (errno=-5) [ 2682.472170] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2682.475438] ata2.00: configured for PIO0 [ 2683.405541] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2683.408894] ata2.00: configured for PIO0 [ 2688.908860] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2688.912128] ata2.00: configured for PIO0 [ 2689.812251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2689.815904] ata2.00: configured for PIO0 [ 2690.745524] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2690.748901] ata2.00: configured for PIO0 [ 2695.753871] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2696.222172] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2696.225538] ata2.00: configured for PIO0 [ 2701.232820] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2701.702206] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2701.705832] ata2.00: configured for PIO0 [ 2702.638854] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2702.642441] ata2.00: configured for PIO0 [ 2703.542216] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2703.545615] ata2.00: configured for PIO0 [ 2704.455498] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2704.458862] ata2.00: configured for PIO0 [ 2709.965525] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2709.968777] ata2.00: configured for PIO0 [ 2710.868880] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2710.872536] ata2.00: configured for PIO0 [ 2711.802220] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2711.805489] ata2.00: configured for PIO0 [ 2712.698899] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2712.702544] ata2.00: configured for PIO0 [ 2713.629153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2713.632494] ata2.00: configured for PIO0 [ 2714.538857] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2714.542185] ata2.00: configured for PIO0 [ 2715.448839] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2715.452100] ata2.00: configured for PIO0 [ 2716.352225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2716.355581] ata2.00: configured for PIO0 [ 2717.252187] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2717.255456] ata2.00: configured for PIO0 [ 2718.162170] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2718.165389] ata2.00: configured for PIO0 [ 2719.062202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2719.065520] ata2.00: configured for PIO0 [ 2719.988859] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2719.992160] ata2.00: configured for PIO0 [ 2720.892169] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2720.895498] ata2.00: configured for PIO0 [ 2726.415542] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2731.421857] ata2.00: failed to set xfermode (err_mask=0x100) [ 2741.422529] ata2: softreset failed (1st FIS failed) [ 2746.938879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2746.942552] ata2.00: configured for PIO0 [ 2747.868884] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2747.872132] ata2.00: configured for PIO0 [ 2748.778887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2753.786648] ata2.00: failed to set xfermode (err_mask=0x100) [ 2754.258862] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2759.265565] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 2759.265571] ata2.00: revalidation failed (errno=-5) [ 2759.735495] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2759.738790] ata2.00: configured for PIO0 [ 2760.672205] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2760.675853] ata2.00: configured for PIO0 [ 2761.578867] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2761.582580] ata2.00: configured for PIO0 [ 2762.482163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2762.485440] ata2.00: configured for PIO0 [ 2772.515650] ata2: softreset failed (1st FIS failed) [ 2778.412163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2778.415400] ata2.00: configured for PIO0 [ 2783.925496] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2783.928851] ata2.00: configured for PIO0 [ 2789.405510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2789.408760] ata2.00: configured for PIO0 [ 2790.308849] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2790.312155] ata2.00: configured for PIO0 [ 2791.222206] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2791.225541] ata2.00: configured for PIO0 [ 2796.755538] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2796.758905] ata2.00: configured for PIO0 [ 2801.965526] ata2.00: qc timeout (cmd 0xa0) [ 2801.965538] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 2802.438868] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2802.442105] ata2.00: configured for PIO0 [ 2803.348836] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2808.356353] ata2.00: failed to set xfermode (err_mask=0x100) [ 2808.828852] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2808.832113] ata2.00: configured for PIO0 [ 2809.765517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2809.769370] ata2.00: configured for PIO0 [ 2810.672203] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2810.675498] ata2.00: configured for PIO0 [ 2815.681553] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2816.152152] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2816.155404] ata2.00: configured for PIO0 [ 2826.542192] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2831.618836] ata2.00: qc timeout (cmd 0xa1) [ 2831.618846] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2831.618849] ata2.00: revalidation failed (errno=-5) [ 2832.088823] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2832.092161] ata2.00: configured for PIO0 [ 2837.098306] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2847.099713] ata2: softreset failed (1st FIS failed) [ 2852.465525] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2862.552176] ata2.00: qc timeout (cmd 0xa1) [ 2862.552187] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 2862.552189] ata2.00: revalidation failed (errno=-5) [ 2862.552192] ata2.00: disabled [ 2863.025554] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4800.380681] systemd-sysv-generator[3246]: SysV service '/etc/rc.d/init.d/pppoe' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4800.380777] systemd-sysv-generator[3246]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [11423.709288] Non-volatile memory driver v1.3 [11424.171040] st: Version 20160209, fixed bufsize 32768, s/g segs 256