Probe #decd87067a of ASUSTek M5A97 R2.0 Desktop Computer

Log: dmesg

[ 0.000000] Linux version 5.10.0-10-amd64 (XXX@XXX) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=UUID=HASH_BE5-046E-FB53-79DF-8A94E4754368 ro quiet [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x284/0x2c0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000da785fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da786000-0x00000000daa69fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daa6a000-0x00000000daa79fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daa7a000-0x00000000db87dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db87e000-0x00000000dca33fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dca34000-0x00000000dca34fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dca35000-0x00000000dcc3afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dcc3b000-0x00000000dd082fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd083000-0x00000000dd7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd7f4000-0x00000000dd7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000081effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2603 06/26/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4013.690 MHz processor [ 0.001457] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001460] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.009468] AGP: No AGP bridge found [ 0.009540] last_pfn = 0x81f000 max_arch_pfn = 0x400000000 [ 0.009544] MTRR default type: uncachable [ 0.009545] MTRR fixed ranges enabled: [ 0.009546] 00000-9FFFF write-back [ 0.009547] A0000-BFFFF write-through [ 0.009548] C0000-CEFFF write-protect [ 0.009549] CF000-EBFFF uncachable [ 0.009550] EC000-FFFFF write-protect [ 0.009550] MTRR variable ranges enabled: [ 0.009552] 0 base 000000000000 mask FFFF80000000 write-back [ 0.009553] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.009554] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.009555] 3 base 0000DD800000 mask FFFFFF800000 uncachable [ 0.009556] 4 base 0000DE000000 mask FFFFFE000000 uncachable [ 0.009557] 5 disabled [ 0.009557] 6 disabled [ 0.009558] 7 disabled [ 0.009559] TOM2: 000000081f000000 aka 33264M [ 0.010413] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010529] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved [ 0.010535] last_pfn = 0xdd800 max_arch_pfn = 0x400000000 [ 0.046580] Using GB pages for direct mapping [ 0.047243] RAMDISK: [mem 0x33019000-0x35803fff] [ 0.047246] ACPI: Early table checksum verification disabled [ 0.047249] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.047253] ACPI: XSDT 0x00000000DAA71070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.047258] ACPI: FACP 0x00000000DAA78200 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.047262] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200925/tbfadt-615) [ 0.047266] ACPI: DSDT 0x00000000DAA71168 007095 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.047270] ACPI: FACS 0x00000000DB878F80 000040 [ 0.047272] ACPI: APIC 0x00000000DAA78310 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.047276] ACPI: FPDT 0x00000000DAA783B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.047279] ACPI: MCFG 0x00000000DAA783F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.047282] ACPI: HPET 0x00000000DAA78438 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.047285] ACPI: SSDT 0x00000000DAA78500 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.047288] ACPI: BGRT 0x00000000DAA784C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.047291] ACPI: Reserving FACP table memory at [mem 0xdaa78200-0xdaa7830b] [ 0.047292] ACPI: Reserving DSDT table memory at [mem 0xdaa71168-0xdaa781fc] [ 0.047293] ACPI: Reserving FACS table memory at [mem 0xdb878f80-0xdb878fbf] [ 0.047294] ACPI: Reserving APIC table memory at [mem 0xdaa78310-0xdaa783ad] [ 0.047294] ACPI: Reserving FPDT table memory at [mem 0xdaa783b0-0xdaa783f3] [ 0.047295] ACPI: Reserving MCFG table memory at [mem 0xdaa783f8-0xdaa78433] [ 0.047296] ACPI: Reserving HPET table memory at [mem 0xdaa78438-0xdaa7846f] [ 0.047297] ACPI: Reserving SSDT table memory at [mem 0xdaa78500-0xdaa79c13] [ 0.047298] ACPI: Reserving BGRT table memory at [mem 0xdaa784c8-0xdaa784ff] [ 0.047305] ACPI: Local APIC address 0xfee00000 [ 0.047363] No NUMA configuration found [ 0.047364] Faking a node at [mem 0x0000000000000000-0x000000081effffff] [ 0.047374] NODE_DATA(0) allocated [mem 0x81efd4000-0x81effdfff] [ 0.047706] Zone ranges: [ 0.047707] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.047709] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.047710] Normal [mem 0x0000000100000000-0x000000081effffff] [ 0.047711] Device empty [ 0.047712] Movable zone start for each node [ 0.047715] Early memory node ranges [ 0.047716] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.047717] node 0: [mem 0x0000000000100000-0x00000000da785fff] [ 0.047718] node 0: [mem 0x00000000dca34000-0x00000000dca34fff] [ 0.047718] node 0: [mem 0x00000000dcc3b000-0x00000000dd082fff] [ 0.047719] node 0: [mem 0x00000000dd7f4000-0x00000000dd7fffff] [ 0.047720] node 0: [mem 0x0000000100001000-0x000000081effffff] [ 0.047724] Initmem setup node 0 [mem 0x0000000000001000-0x000000081effffff] [ 0.047725] On node 0 totalpages: 8362871 [ 0.047726] DMA zone: 64 pages used for memmap [ 0.047727] DMA zone: 21 pages reserved [ 0.047728] DMA zone: 3997 pages, LIFO batch:0 [ 0.047729] DMA32 zone: 13936 pages used for memmap [ 0.047730] DMA32 zone: 891867 pages, LIFO batch:63 [ 0.047730] Normal zone: 116672 pages used for memmap [ 0.047731] Normal zone: 7467007 pages, LIFO batch:63 [ 0.047734] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.047772] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.057240] On node 0, zone DMA32: 8878 pages in unavailable ranges [ 0.057263] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.057289] On node 0, zone DMA32: 1905 pages in unavailable ranges [ 0.058172] On node 0, zone Normal: 10241 pages in unavailable ranges [ 0.058230] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.058441] ACPI: PM-Timer IO Port: 0x808 [ 0.058443] ACPI: Local APIC address 0xfee00000 [ 0.058449] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.058456] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.058459] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.058461] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.058463] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.058464] ACPI: IRQ0 used by override. [ 0.058465] ACPI: IRQ9 used by override. [ 0.058466] Using ACPI (MADT) for SMP configuration information [ 0.058468] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.058473] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.058494] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.058495] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.058496] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.058497] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.058498] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.058499] PM: hibernation: Registered nosave memory: [mem 0xda786000-0xdaa69fff] [ 0.058500] PM: hibernation: Registered nosave memory: [mem 0xdaa6a000-0xdaa79fff] [ 0.058501] PM: hibernation: Registered nosave memory: [mem 0xdaa7a000-0xdb87dfff] [ 0.058501] PM: hibernation: Registered nosave memory: [mem 0xdb87e000-0xdca33fff] [ 0.058503] PM: hibernation: Registered nosave memory: [mem 0xdca35000-0xdcc3afff] [ 0.058505] PM: hibernation: Registered nosave memory: [mem 0xdd083000-0xdd7f3fff] [ 0.058506] PM: hibernation: Registered nosave memory: [mem 0xdd800000-0xfebfffff] [ 0.058507] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.058508] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.058508] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.058509] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.058510] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.058510] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.058511] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.058511] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.058512] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.058513] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.058513] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.058514] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.058514] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.058515] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.058517] [mem 0xdd800000-0xfebfffff] available for PCI devices [ 0.058518] Booting paravirtualized kernel on bare hardware [ 0.058521] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.061832] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.062324] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u262144 [ 0.062331] pcpu-alloc: s200536 r8192 d28840 u262144 alloc=1*2097152 [ 0.062333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.062365] Built 1 zonelists, mobility grouping on. Total pages: 8232178 [ 0.062366] Policy zone: Normal [ 0.062367] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=UUID=HASH_BE5-046E-FB53-79DF-8A94E4754368 ro quiet [ 0.067578] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.070209] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.070240] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.080568] AGP: Checking aperture... [ 0.088572] AGP: No AGP bridge found [ 0.088576] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) [ 0.088577] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.088578] AGP: Please enable the IOMMU option in the BIOS setup [ 0.088578] AGP: This costs you 64MB of RAM [ 0.088581] AGP: Mapping aperture over RAM [mem 0xd0000000-0xd3ffffff] (65536KB) [ 0.088584] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd3ffffff] [ 0.113730] Memory: 3673304K/33451484K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 782844K reserved, 0K cma-reserved) [ 0.113867] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.113880] ftrace: allocating 36444 entries in 143 pages [ 0.125964] ftrace: allocated 143 pages with 5 groups [ 0.126101] rcu: Hierarchical RCU implementation. [ 0.126102] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.126103] Rude variant of Tasks RCU enabled. [ 0.126103] Tracing variant of Tasks RCU enabled. [ 0.126104] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.126105] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.129487] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129820] spurious 8259A interrupt: IRQ7. [ 0.133494] Console: colour VGA+ 80x25 [ 0.133506] printk: console [tty0] enabled [ 0.133521] ACPI: Core revision 20200925 [ 0.133597] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133621] APIC: Switch to symmetric I/O mode setup [ 0.134129] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153608] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39dae149b91, max_idle_ns: 440795368648 ns [ 0.153611] Calibrating delay loop (skipped), value calculated using timer frequency.. 8027.38 BogoMIPS (lpj=16054760) [ 0.153613] pid_max: default: 32768 minimum: 301 [ 0.153641] LSM: Security Framework initializing [ 0.153650] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.153678] AppArmor: AppArmor initialized [ 0.153679] TOMOYO Linux initialized [ 0.153782] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.153869] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.154096] LVT offset 1 assigned for vector 0xf9 [ 0.154101] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.154101] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.154104] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.154106] Spectre V2 : Mitigation: Full AMD retpoline [ 0.154106] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.154108] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.154220] Freeing SMP alternatives memory: 32K [ 0.267733] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.267878] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.267883] ... version: 0 [ 0.267883] ... bit width: 48 [ 0.267884] ... generic registers: 6 [ 0.267885] ... value mask: 0000ffffffffffff [ 0.267885] ... max period: 00007fffffffffff [ 0.267886] ... fixed-purpose events: 0 [ 0.267887] ... event mask: 000000000000003f [ 0.267954] rcu: Hierarchical SRCU implementation. [ 0.268254] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.268355] smp: Bringing up secondary CPUs ... [ 0.268457] x86: Booting SMP configuration: [ 0.268458] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.285664] smp: Brought up 1 node, 8 CPUs [ 0.285664] smpboot: Max logical packages: 1 [ 0.285664] smpboot: Total of 8 processors activated (64219.04 BogoMIPS) [ 0.346987] node 0 deferred pages initialised in 56ms [ 0.349692] devtmpfs: initialized [ 0.349692] x86/mm: Memory block size: 128MB [ 0.351980] PM: Registering ACPI NVS region [mem 0xdaa7a000-0xdb87dfff] (14696448 bytes) [ 0.351980] PM: Registering ACPI NVS region [mem 0xdca35000-0xdcc3afff] (2121728 bytes) [ 0.351980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.351980] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.351980] pinctrl core: initialized pinctrl subsystem [ 0.351980] NET: Registered protocol family 16 [ 0.351980] thermal_sys: Registered thermal governor 'fair_share' [ 0.351980] thermal_sys: Registered thermal governor 'bang_bang' [ 0.351980] thermal_sys: Registered thermal governor 'step_wise' [ 0.351980] thermal_sys: Registered thermal governor 'user_space' [ 0.351980] thermal_sys: Registered thermal governor 'power_allocator' [ 0.351980] cpuidle: using governor ladder [ 0.351980] cpuidle: using governor menu [ 0.351980] ACPI: bus type PCI registered [ 0.351980] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.351980] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.351980] PCI: not using MMCONFIG [ 0.351980] PCI: Using configuration type 1 for base access [ 0.351980] PCI: Using configuration type 1 for extended access [ 0.353658] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.353659] mtrr: probably your BIOS does not setup all CPUs. [ 0.353659] mtrr: corrected configuration. [ 0.354427] Kprobes globally optimized [ 0.354436] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.354436] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.506211] ACPI: Added _OSI(Module Device) [ 0.506211] ACPI: Added _OSI(Processor Device) [ 0.506211] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.506211] ACPI: Added _OSI(Processor Aggregator Device) [ 0.506211] ACPI: Added _OSI(Linux-Dell-Video) [ 0.506211] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.506211] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.508215] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.509056] ACPI: EC: EC started [ 0.509057] ACPI: EC: interrupt blocked [ 0.509061] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.509063] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.509064] ACPI: Interpreter enabled [ 0.509078] ACPI: (supports S0 S3 S4 S5) [ 0.509079] ACPI: Using IOAPIC for interrupt routing [ 0.509194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.509226] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.509236] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.509444] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.514509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.514513] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.514781] PCI host bridge to bus 0000:00 [ 0.514783] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.514784] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.514786] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.514787] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.514788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.514789] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.514790] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window] [ 0.514791] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.514802] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.514917] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.514933] pci 0000:00:02.0: enabling Extended Tags [ 0.514955] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.515046] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.515062] pci 0000:00:04.0: enabling Extended Tags [ 0.515113] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.515203] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.515218] pci 0000:00:05.0: enabling Extended Tags [ 0.515239] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.515332] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.515348] pci 0000:00:07.0: enabling Extended Tags [ 0.515368] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.515467] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.515479] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.515486] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.515492] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.515499] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.515505] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.515512] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff] [ 0.515613] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.515625] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff] [ 0.515750] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.515762] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff] [ 0.515820] pci 0000:00:12.2: supports D1 D2 [ 0.515821] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.515902] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.515913] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff] [ 0.516029] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.516041] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff] [ 0.516099] pci 0000:00:13.2: supports D1 D2 [ 0.516100] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.516182] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.516331] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.516347] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit] [ 0.516395] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.516471] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.516590] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.516689] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.516701] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff] [ 0.516818] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.516830] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff] [ 0.516955] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.516967] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff] [ 0.517025] pci 0000:00:16.2: supports D1 D2 [ 0.517026] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.517104] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.517168] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.517227] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.517287] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.517350] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.517409] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.517636] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000 [ 0.517646] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.517653] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.517661] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.517666] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.517671] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.517675] pci 0000:01:00.0: enabling Extended Tags [ 0.517764] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.517772] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.517800] pci 0000:01:00.1: enabling Extended Tags [ 0.517870] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.517872] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.517874] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.517876] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.518044] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.518057] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.518075] pci 0000:02:00.0: reg 0x18: [mem 0xfa104000-0xfa104fff 64bit pref] [ 0.518087] pci 0000:02:00.0: reg 0x20: [mem 0xfa100000-0xfa103fff 64bit pref] [ 0.518155] pci 0000:02:00.0: supports D1 D2 [ 0.518156] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.518238] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.518241] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.518244] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.518284] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.518303] pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit] [ 0.518396] pci 0000:03:00.0: PME# supported from D3cold [ 0.518463] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.518466] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.518507] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.518526] pci 0000:04:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit] [ 0.518619] pci 0000:04:00.0: PME# supported from D3cold [ 0.518714] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.518717] pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.518727] pci_bus 0000:05: extended config space not accessible [ 0.518757] pci 0000:05:06.0: [1106:3038] type 00 class 0x0c0300 [ 0.518805] pci 0000:05:06.0: reg 0x20: [io 0xc020-0xc03f] [ 0.518849] pci 0000:05:06.0: supports D1 D2 [ 0.518850] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.518890] pci 0000:05:06.1: [1106:3038] type 00 class 0x0c0300 [ 0.518938] pci 0000:05:06.1: reg 0x20: [io 0xc000-0xc01f] [ 0.518982] pci 0000:05:06.1: supports D1 D2 [ 0.518983] pci 0000:05:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.519024] pci 0000:05:06.2: [1106:3104] type 00 class 0x0c0320 [ 0.519040] pci 0000:05:06.2: reg 0x10: [mem 0xfe100000-0xfe1000ff] [ 0.519116] pci 0000:05:06.2: supports D1 D2 [ 0.519117] pci 0000:05:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.519190] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.519193] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.519195] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.519198] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.519199] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.519200] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.519201] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.519202] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.519203] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.519204] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode) [ 0.519544] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.519600] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.519658] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.519715] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 [ 0.519763] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.519801] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.519838] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.519875] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.519984] ACPI: EC: interrupt unblocked [ 0.519985] ACPI: EC: event unblocked [ 0.519989] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.519990] ACPI: EC: GPE=0xa [ 0.519991] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.519993] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.520040] iommu: Default domain type: Translated [ 0.521632] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.521632] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.521632] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.521632] vgaarb: loaded [ 0.521688] EDAC MC: Ver: 3.0.0 [ 0.521756] NetLabel: Initializing [ 0.521756] NetLabel: domain hash size = 128 [ 0.521756] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.521756] NetLabel: unlabeled traffic allowed by default [ 0.521756] PCI: Using ACPI for IRQ routing [ 0.526907] PCI: pci_cache_line_size set to 64 bytes [ 0.526958] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.526960] e820: reserve RAM buffer [mem 0xda786000-0xdbffffff] [ 0.526961] e820: reserve RAM buffer [mem 0xdca35000-0xdfffffff] [ 0.526962] e820: reserve RAM buffer [mem 0xdd083000-0xdfffffff] [ 0.526963] e820: reserve RAM buffer [mem 0xdd800000-0xdfffffff] [ 0.526964] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff] [ 0.526981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.526984] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.529611] clocksource: Switched to clocksource tsc-early [ 0.541045] VFS: Disk quotas dquot_6.6.0 [ 0.541059] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.541175] AppArmor: AppArmor Filesystem Enabled [ 0.541188] pnp: PnP ACPI init [ 0.541290] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.541295] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.541516] system 00:01: [io 0x040b] has been reserved [ 0.541517] system 00:01: [io 0x04d6] has been reserved [ 0.541518] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.541519] system 00:01: [io 0x0c14] has been reserved [ 0.541521] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.541522] system 00:01: [io 0x0c52] has been reserved [ 0.541523] system 00:01: [io 0x0c6c] has been reserved [ 0.541524] system 00:01: [io 0x0c6f] has been reserved [ 0.541525] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.541526] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.541527] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.541528] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.541529] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.541532] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.541533] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.541534] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.541535] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.541536] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.541538] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.541539] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.541541] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.541542] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.541544] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.541545] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.541546] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.541550] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541672] system 00:02: [io 0x0290-0x02af] has been reserved [ 0.541675] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541699] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.541750] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.541754] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541789] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541932] pnp 00:06: [dma 0 disabled] [ 0.541965] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.542068] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.542146] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.542149] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.542263] pnp: PnP ACPI: found 9 devices [ 0.548324] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.548376] NET: Registered protocol family 2 [ 0.548709] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.551251] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.551603] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.551995] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.552056] TCP: Hash tables configured (established 262144 bind 65536) [ 0.552183] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.552313] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.552556] NET: Registered protocol family 1 [ 0.552561] NET: Registered protocol family 44 [ 0.552577] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.552579] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.552582] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.552584] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.552586] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.552588] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.552591] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.552593] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.552595] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.552598] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.552600] pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.552604] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.552605] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.552609] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.552615] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.552616] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.552617] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.552618] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.552619] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.552620] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.552621] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.552622] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.552623] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] [ 0.552624] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.552625] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.552626] pci_bus 0000:02: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.552627] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.552628] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff] [ 0.552629] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.552630] pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.552631] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window] [ 0.552632] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window] [ 0.552633] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window] [ 0.552634] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window] [ 0.552635] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.552636] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.552637] pci_bus 0000:05: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.574286] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x700 took 21090 usecs [ 0.594274] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x700 took 19413 usecs [ 0.614279] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x700 took 19423 usecs [ 0.634279] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x700 took 19525 usecs [ 0.634402] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.634434] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.635024] PCI: CLS 64 bytes, default 64 [ 0.635069] Trying to unpack rootfs image as initramfs... [ 1.187806] Freeing initrd memory: 40876K [ 1.188539] PCI-DMA: Disabling AGP. [ 1.188598] PCI-DMA: aperture base @ d0000000 size 65536 KB [ 1.188599] PCI-DMA: using GART IOMMU. [ 1.188601] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.191133] amd_uncore: 4 amd_nb counters detected [ 1.191302] LVT offset 0 assigned for vector 0x400 [ 1.191370] perf: AMD IBS detected (0x000000ff) [ 1.191746] Initialise system trusted keyrings [ 1.191754] Key type blacklist registered [ 1.191814] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.192914] zbud: loaded [ 1.193088] integrity: Platform Keyring initialized [ 1.193089] Key type asymmetric registered [ 1.193090] Asymmetric key parser 'x509' registered [ 1.193097] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.193137] io scheduler mq-deadline registered [ 1.193755] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.193790] ACPI: \_PR_.P001: Found 2 idle states [ 1.193862] ACPI: \_PR_.P002: Found 2 idle states [ 1.193924] ACPI: \_PR_.P003: Found 2 idle states [ 1.193980] ACPI: \_PR_.P004: Found 2 idle states [ 1.194084] ACPI: \_PR_.P005: Found 2 idle states [ 1.194157] ACPI: \_PR_.P006: Found 2 idle states [ 1.194247] ACPI: \_PR_.P007: Found 2 idle states [ 1.194319] ACPI: \_PR_.P008: Found 2 idle states [ 1.194546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.194669] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.195245] Linux agpgart interface v0.103 [ 1.195275] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.195736] i8042: PNP: No PS/2 controller found. [ 1.195790] mousedev: PS/2 mouse device common for all mice [ 1.195816] rtc_cmos 00:03: RTC can wake from S4 [ 1.195956] rtc_cmos 00:03: registered as rtc0 [ 1.195983] rtc_cmos 00:03: setting system clock to 2025-03-23T20:04:13 UTC (1742760253) [ 1.195995] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.196075] ledtrig-cpu: registered to indicate activity on CPUs [ 1.196357] NET: Registered protocol family 10 [ 1.202685] Segment Routing with IPv6 [ 1.202702] mip6: Mobile IPv6 [ 1.202704] NET: Registered protocol family 17 [ 1.202750] mpls_gso: MPLS GSO support [ 1.202752] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.203192] microcode: CPU0: patch_level=0x06000822 [ 1.203199] microcode: CPU1: patch_level=0x06000822 [ 1.203208] microcode: CPU2: patch_level=0x06000822 [ 1.203213] microcode: CPU3: patch_level=0x06000822 [ 1.203222] microcode: CPU4: patch_level=0x06000822 [ 1.203228] microcode: CPU5: patch_level=0x06000822 [ 1.203235] microcode: CPU6: patch_level=0x06000822 [ 1.203242] microcode: CPU7: patch_level=0x06000822 [ 1.203245] microcode: Microcode Update Driver: v2.2. [ 1.203249] IPI shorthand broadcast: enabled [ 1.203255] sched_clock: Marking stable (1263327515, -60173559)->(1490996003, -287842047) [ 1.203353] registered taskstats version 1 [ 1.203355] Loading compiled-in X.509 certificates [ 1.237794] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.237808] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 1.237856] zswap: loaded using pool lzo/zbud [ 1.237999] Key type ._fscrypt registered [ 1.238000] Key type .fscrypt registered [ 1.238000] Key type fscrypt-provisioning registered [ 1.238035] AppArmor: AppArmor sha1 policy hashing enabled [ 1.239635] Freeing unused kernel image (initmem) memory: 2408K [ 1.269673] Write protecting the kernel read-only data: 22528k [ 1.270278] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.270453] Freeing unused kernel image (rodata/data gap) memory: 628K [ 1.302872] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.302876] Run /init as init process [ 1.302877] with arguments: [ 1.302878] /init [ 1.302878] with environment: [ 1.302879] HOME=/ [ 1.302879] TERM=linux [ 1.302880] BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 [ 1.366819] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.381409] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.381418] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.381560] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.385666] ACPI: Power Button [PWRB] [ 1.385735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.385777] ACPI: Power Button [PWRF] [ 1.391784] ACPI: bus type USB registered [ 1.391826] usbcore: registered new interface driver usbfs [ 1.391842] usbcore: registered new interface driver hub [ 1.391861] usbcore: registered new device driver usb [ 1.395793] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.397399] SCSI subsystem initialized [ 1.397972] uhci_hcd: USB Universal Host Controller Interface driver [ 1.397989] ehci-pci: EHCI PCI platform driver [ 1.398167] QUIRK: Enable AMD PLL fix [ 1.398197] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.398208] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.398212] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.398221] ehci-pci 0000:00:12.2: debug port 1 [ 1.398266] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000 [ 1.399799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.410363] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.413627] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.413694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.413696] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.413698] usb usb1: Product: EHCI Host Controller [ 1.413699] usb usb1: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd [ 1.413700] usb usb1: SerialNumber: ... [ 1.413877] libata version 3.00 loaded. [ 1.413880] hub 1-0:1.0: USB hub found [ 1.413889] hub 1-0:1.0: 5 ports detected [ 1.414300] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.414306] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 1.511877] MXM: GUID detected in BIOS [ 1.548146] uhci_hcd 0000:05:06.0: UHCI Host Controller [ 1.548152] uhci_hcd 0000:05:06.0: new USB bus registered, assigned bus number 3 [ 1.548160] uhci_hcd 0000:05:06.0: detected 2 ports [ 1.548191] uhci_hcd 0000:05:06.0: irq 21, io base 0x0000c020 [ 1.548279] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.548280] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.548282] usb usb3: Product: UHCI Host Controller [ 1.548282] usb usb3: Manufacturer: Linux 5.10.0-10-amd64 uhci_hcd [ 1.548283] usb usb3: SerialNumber: ... [ 1.548428] hub 3-0:1.0: USB hub found [ 1.548467] hub 3-0:1.0: 2 ports detected [ 1.548605] libphy: r8169: probed [ 1.548646] xhci_hcd 0000:03:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410 [ 1.548840] r8169 0000:02:00.0 eth0: RTL8168f/8111f, XX:XX:XX:XX:XX:XX, XID 480, IRQ 31 [ 1.548842] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.549128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.549130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.549131] usb usb2: Product: xHCI Host Controller [ 1.549132] usb usb2: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd [ 1.549132] usb usb2: SerialNumber: ... [ 1.549236] ahci 0000:00:11.0: version 3.0 [ 1.549393] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.549394] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.550063] scsi host0: ahci [ 1.550180] hub 2-0:1.0: USB hub found [ 1.550189] hub 2-0:1.0: 2 ports detected [ 1.550257] scsi host1: ahci [ 1.550268] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.550381] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.550385] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.550389] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.550397] ehci-pci 0000:00:13.2: debug port 1 [ 1.550424] ehci-pci 0000:00:13.2: irq 21, io mem 0xfe407000 [ 1.550447] scsi host2: ahci [ 1.550522] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.550533] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 1.550536] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.550588] scsi host3: ahci [ 1.550639] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19 [ 1.550640] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19 [ 1.550642] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19 [ 1.550644] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19 [ 1.550668] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.550695] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.550697] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.550698] usb usb5: Product: xHCI Host Controller [ 1.550699] usb usb5: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd [ 1.550700] usb usb5: SerialNumber: ... [ 1.550818] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 1.551597] Console: switching to colour dummy device 80x25 [ 1.551685] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1) [ 1.594563] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.594634] hub 5-0:1.0: USB hub found [ 1.594641] hub 5-0:1.0: 2 ports detected [ 1.594755] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.594756] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.594757] usb usb4: Product: EHCI Host Controller [ 1.594758] usb usb4: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd [ 1.594759] usb usb4: SerialNumber: ... [ 1.597604] hub 4-0:1.0: USB hub found [ 1.597623] hub 4-0:1.0: 5 ports detected [ 1.666194] nouveau 0000:01:00.0: bios: version 80.28.a6.00.22 [ 1.666604] uhci_hcd 0000:05:06.1: UHCI Host Controller [ 1.666608] uhci_hcd 0000:05:06.1: new USB bus registered, assigned bus number 6 [ 1.666614] uhci_hcd 0000:05:06.1: detected 2 ports [ 1.666634] uhci_hcd 0000:05:06.1: irq 19, io base 0x0000c000 [ 1.666812] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.666989] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.666990] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.666992] usb usb6: Product: UHCI Host Controller [ 1.666993] usb usb6: Manufacturer: Linux 5.10.0-10-amd64 uhci_hcd [ 1.666993] usb usb6: SerialNumber: ... [ 1.667080] hub 6-0:1.0: USB hub found [ 1.667086] hub 6-0:1.0: 2 ports detected [ 1.667181] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 1.727754] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 1.781670] xhci_hcd 0000:04:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410 [ 1.781896] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.781897] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.781898] usb usb7: Product: xHCI Host Controller [ 1.781899] usb usb7: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd [ 1.781900] usb usb7: SerialNumber: ... [ 1.797680] hub 7-0:1.0: USB hub found [ 1.797687] hub 7-0:1.0: 2 ports detected [ 1.797767] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.797771] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 8 [ 1.797776] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.797784] ehci-pci 0000:00:16.2: debug port 1 [ 1.797811] ehci-pci 0000:00:16.2: irq 23, io mem 0xfe404000 [ 1.797874] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.797877] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 [ 1.797879] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.797915] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.797938] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.797939] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.797940] usb usb9: Product: xHCI Host Controller [ 1.797941] usb usb9: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd [ 1.797941] usb usb9: SerialNumber: ... [ 1.813702] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.813730] hub 9-0:1.0: USB hub found [ 1.813738] hub 9-0:1.0: 2 ports detected [ 1.813842] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.813844] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.813845] usb usb8: Product: EHCI Host Controller [ 1.813845] usb usb8: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd [ 1.813846] usb usb8: SerialNumber: ... [ 1.829692] hub 8-0:1.0: USB hub found [ 1.829699] hub 8-0:1.0: 4 ports detected [ 2.025675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.025712] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.026435] ata3.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133 [ 2.026438] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.026510] ata1.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133 [ 2.026512] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.027142] ata3.00: configured for UDMA/133 [ 2.027267] ata1.00: configured for UDMA/133 [ 2.027366] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 2.032392] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.032394] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.032403] sd 0:0:0:0: [sda] Write Protect is off [ 2.032404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.032421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.033652] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.033678] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.037003] ata2.00: ATAPI: ATAPI iHAS124 F, CL9P, max UDMA/133 [ 2.037798] ata2.00: configured for UDMA/133 [ 2.039761] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 F CL9P PQ: 0 ANSI: 5 [ 2.085914] ata4.00: ATA-11: ST18000NM000J-2TV103, SN02, max UDMA/133 [ 2.085917] ata4.00: 35156656128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.114232] scsi 2:0:0:0: Direct-Access ATA WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5 [ 2.115573] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.115599] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 2.115736] sd 2:0:0:0: [sdb] Write Protect is off [ 2.115768] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.116021] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.119269] ata4.00: configured for UDMA/133 [ 2.120106] scsi 3:0:0:0: Direct-Access ATA ST18000NM000J-2T SN02 PQ: 0 ANSI: 5 [ 2.121973] sd 3:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB) [ 2.121976] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 2.121984] sd 3:0:0:0: [sdc] Write Protect is off [ 2.121985] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.121999] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.132567] sda: sda1 sda2 < sda5 > [ 2.157808] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.209668] tsc: Refined TSC clocksource calibration: 4013.418 MHz [ 2.209676] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39d9e0b5590, max_idle_ns: 440795396389 ns [ 2.213647] clocksource: Switched to clocksource tsc [ 2.223488] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.226996] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.226999] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.237761] sd 3:0:0:0: [sdc] Attached SCSI disk [ 2.269771] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.361688] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.397622] random: fast init done [ 3.034259] ehci-pci 0000:05:06.2: EHCI Host Controller [ 3.034265] ehci-pci 0000:05:06.2: new USB bus registered, assigned bus number 10 [ 3.034311] ehci-pci 0000:05:06.2: irq 16, io mem 0xfe100000 [ 3.035659] [TTM] Zone kernel: Available graphics memory: 16390272 KiB [ 3.035660] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.035661] [TTM] Initializing pool allocator [ 3.035664] [TTM] Initializing DMA pool allocator [ 3.035675] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 3.035676] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.035679] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.035680] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.035682] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 3.035683] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 3.035684] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 3.035685] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 3.035686] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 3.035687] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 3.036031] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 3.161668] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 3.161683] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 3.222809] nouveau 0000:01:00.0: DRM: allocated 1680x1050 fb: 0x80000, bo (____ptrval____) [ 3.222903] fbcon: nouveaudrmfb (fb0) is primary device [ 3.267271] Console: switching to colour frame buffer device 210x65 [ 3.268838] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 3.281891] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.813662] ehci-pci 0000:05:06.2: USB 2.0 started, EHCI 1.00 [ 3.813721] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.813723] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.813724] usb usb10: Product: EHCI Host Controller [ 3.813725] usb usb10: Manufacturer: Linux 5.10.0-10-amd64 ehci_hcd [ 3.813725] usb usb10: SerialNumber: ... [ 3.813872] hub 10-0:1.0: USB hub found [ 3.813881] hub 10-0:1.0: 4 ports detected [ 3.845703] hub 3-0:1.0: USB hub found [ 3.845710] hub 3-0:1.0: 2 ports detected [ 3.877704] hub 6-0:1.0: USB hub found [ 3.877711] hub 6-0:1.0: 2 ports detected [ 3.878761] ohci-pci: OHCI PCI platform driver [ 3.878953] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 3.878959] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 11 [ 3.878982] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000 [ 3.941696] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 3.941698] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.941699] usb usb11: Product: OHCI PCI host controller [ 3.941700] usb usb11: Manufacturer: Linux 5.10.0-10-amd64 ohci_hcd [ 3.941701] usb usb11: SerialNumber: ... [ 3.941840] hub 11-0:1.0: USB hub found [ 3.941847] hub 11-0:1.0: 5 ports detected [ 3.942094] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 3.942100] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 12 [ 3.942120] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe408000 [ 3.980012] usb 1-3: New USB device found, idVendor=058f, idProduct=6364, bcdDevice= 1.00 [ 3.980014] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.980015] usb 1-3: Product: Mass Storage Device [ 3.980016] usb 1-3: Manufacturer: Generic [ 3.980017] usb 1-3: SerialNumber: ... [ 3.981156] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02 [ 3.981158] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.981159] usb 2-1: Product: USB2.0 Hub [ 3.981160] usb 2-1: Manufacturer: GenesysLogic [ 3.985149] hub 2-1:1.0: USB hub found [ 3.986503] hub 2-1:1.0: 4 ports detected [ 4.005691] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 4.005693] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.005694] usb usb12: Product: OHCI PCI host controller [ 4.005695] usb usb12: Manufacturer: Linux 5.10.0-10-amd64 ohci_hcd [ 4.005696] usb usb12: SerialNumber: ... [ 4.005808] hub 12-0:1.0: USB hub found [ 4.005815] hub 12-0:1.0: 5 ports detected [ 4.006047] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 4.006051] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 13 [ 4.006067] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000 [ 4.069688] usb usb13: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 4.069690] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.069691] usb usb13: Product: OHCI PCI host controller [ 4.069692] usb usb13: Manufacturer: Linux 5.10.0-10-amd64 ohci_hcd [ 4.069692] usb usb13: SerialNumber: ... [ 4.069843] hub 13-0:1.0: USB hub found [ 4.069851] hub 13-0:1.0: 2 ports detected [ 4.070041] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 4.070045] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 14 [ 4.070068] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe405000 [ 4.102254] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 4.129450] usb 5-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02 [ 4.129452] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.129453] usb 5-1: Product: USB3.0 Hub [ 4.129454] usb 5-1: Manufacturer: GenesysLogic [ 4.137681] hub 5-1:1.0: USB hub found [ 4.137719] usb usb14: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 4.137720] usb usb14: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.137721] usb usb14: Product: OHCI PCI host controller [ 4.137722] usb usb14: Manufacturer: Linux 5.10.0-10-amd64 ohci_hcd [ 4.137723] usb usb14: SerialNumber: ... [ 4.137816] hub 14-0:1.0: USB hub found [ 4.137824] hub 14-0:1.0: 4 ports detected [ 4.138448] hub 5-1:1.0: 4 ports detected [ 4.309653] usb 12-1: new low-speed USB device number 2 using ohci-pci [ 4.361625] usb 11-5: new low-speed USB device number 2 using ohci-pci [ 4.514755] usb 12-1: New USB device found, idVendor=045e, idProduct=082c, bcdDevice= 1.09 [ 4.514757] usb 12-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.514759] usb 12-1: Product: Microsoft Ergonomic Keyboard [ 4.514760] usb 12-1: Manufacturer: Microsoft [ 4.514761] usb 12-1: SerialNumber: ... [ 4.527906] hid: raw HID events driver (C) Jiri Kosina [ 4.553846] usbcore: registered new interface driver usbhid [ 4.553847] usbhid: USB HID core driver [ 4.555489] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:12.2-3/input1 [ 4.555887] input: Microsoft Microsoft Ergonomic Keyboard as /devices/pci0000:00/0000:00:13.0/usb12/12-1/12-1:1.0/0003:045E:082C.0002/input/input2 [ 4.556757] usb 11-5: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 4.556759] usb 11-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.556760] usb 11-5: Product: USB Optical Mouse [ 4.556761] usb 11-5: Manufacturer: Logitech [ 4.563944] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb11/11-5/11-5:1.0/0003:046D:C077.0004/input/input6 [ 4.613787] input: Microsoft Microsoft Ergonomic Keyboard Consumer Control as /devices/pci0000:00/0000:00:13.0/usb12/12-1/12-1:1.0/0003:045E:082C.0002/input/input3 [ 4.613860] input: Microsoft Microsoft Ergonomic Keyboard Mouse as /devices/pci0000:00/0000:00:13.0/usb12/12-1/12-1:1.0/0003:045E:082C.0002/input/input4 [ 4.613865] hid-generic 0003:046D:C077.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0 [ 4.613961] hid-generic 0003:045E:082C.0002: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:13.0-1/input0 [ 4.614102] hid-generic 0003:045E:082C.0003: hiddev2,hidraw3: USB HID v1.11 Device [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:13.0-1/input1 [ 4.891267] usb-storage 1-3:1.0: USB Mass Storage device detected [ 4.891401] scsi host4: usb-storage 1-3:1.0 [ 4.891517] usbcore: registered new interface driver usb-storage [ 4.892798] usbcore: registered new interface driver uas [ 4.923122] PM: Image not found (code -22) [ 5.010578] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 5.187790] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.914558] systemd[1]: Inserted module 'autofs4' [ 5.922411] scsi 4:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 5.923019] scsi 4:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 5.923644] scsi 4:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 5.924272] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 5.970394] sd 4:0:0:1: [sde] Attached SCSI removable disk [ 5.972505] sd 4:0:0:3: [sdg] Attached SCSI removable disk [ 5.973886] sd 4:0:0:2: [sdf] Attached SCSI removable disk [ 5.975418] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 5.993900] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.013769] systemd[1]: Detected architecture x86-64. [ 6.030359] systemd[1]: Set hostname to ... [ 6.539089] random: crng init done [ 6.697845] systemd[1]: /lib/systemd/system/systemd-udevd.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring [ 6.697850] systemd[1]: /lib/systemd/system/systemd-udevd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring [ 6.697863] systemd[1]: /lib/systemd/system/systemd-udevd.service:26: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring [ 6.762617] systemd[1]: /lib/systemd/system/logrotate.service:16: Unknown lvalue 'ProtectClock' in section 'Service', ignoring [ 6.762623] systemd[1]: /lib/systemd/system/logrotate.service:18: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring [ 6.762628] systemd[1]: /lib/systemd/system/logrotate.service:19: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring [ 7.176761] systemd[1]: Listening on udev Kernel Socket. [ 7.301369] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 7.442967] systemd-journald[298]: Received request to flush runtime journal from PID 1 [ 7.468071] lp: driver loaded but no devices found [ 7.481628] ppdev: user-space parallel port driver [ 8.145683] loop: module loaded [ 8.229528] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 8.461855] acpi_cpufreq: overriding BIOS provided _PSD data [ 8.573338] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 8.638614] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.638665] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.638702] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 8.638736] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 8.638774] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 8.638813] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 8.638852] sd 4:0:0:2: Attached scsi generic sg6 type 0 [ 8.638893] sd 4:0:0:3: Attached scsi generic sg7 type 0 [ 8.708628] cryptd: max_cpu_qlen set to 1000 [ 8.708837] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 8.708917] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 8.708993] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 8.922371] asus_wmi: ASUS WMI generic driver loaded [ 8.932170] AVX version of gcm_enc/dec engaged. [ 8.932173] AES CTR mode by8 optimization enabled [ 8.971047] asus_wmi: Initialization: 0x0 [ 8.971072] asus_wmi: BIOS WMI version: 0.9 [ 8.971110] asus_wmi: SFUN value: 0x0 [ 8.971112] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 8.971480] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8 [ 9.468903] snd_hda_intel 0000:01:00.1: Disabling MSI [ 9.468927] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 9.655504] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 9.663849] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 9.664018] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 9.664200] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 9.664368] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 9.664518] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 9.719415] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 9.719418] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.719419] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.719420] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.719421] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 9.719422] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.719423] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 9.719425] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.719426] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 9.731329] kvm: Nested Virtualization enabled [ 9.731337] SVM: kvm: Nested Paging enabled [ 9.741846] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 9.741925] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 9.742032] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 9.742107] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 9.742156] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 9.742204] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 9.742257] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 9.742296] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 9.785774] Adding 1000444k swap on /dev/sdb3. Priority:-2 extents:1 across:1000444k FS [ 9.925644] MCE: In-kernel MCE decoding enabled. [ 9.966130] EDAC amd64: F15h detected (node 0). [ 9.966162] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.018680] EDAC amd64: F15h detected (node 0). [ 10.018750] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.080798] EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null) [ 10.142284] EDAC amd64: F15h detected (node 0). [ 10.142319] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.202183] EDAC amd64: F15h detected (node 0). [ 10.202221] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.250640] EDAC amd64: F15h detected (node 0). [ 10.250711] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.294259] EDAC amd64: F15h detected (node 0). [ 10.294295] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.334220] EDAC amd64: F15h detected (node 0). [ 10.334274] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.366617] EDAC amd64: F15h detected (node 0). [ 10.366688] EDAC amd64: Node 0: DRAM ECC disabled. [ 10.577096] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 12.516811] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168f-1.fw (-2) [ 12.516825] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 12.516832] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2 [ 12.516835] r8169 0000:02:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2) [ 12.517333] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE) [ 12.588000] r8169 0000:02:00.0 enp2s0: Link is Down [ 14.835345] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off [ 14.835365] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 21.185787] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 21.189330] Bridge firewalling registered [ 21.716098] Initializing XFRM netlink socket [ 25.508910] fuse: init (API version 7.32) [ 27.306997] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv106_fuc084 (-2) [ 27.307007] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2 [ 27.307032] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv106_fuc084d (-2) [ 27.307036] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2 [ 27.307041] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 27.307045] nouveau 0000:01:00.0: msvld: init failed, -19 [ 51.133435] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv106_fuc084 (-2) [ 51.133439] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2 [ 51.133448] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv106_fuc084d (-2) [ 51.133450] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2 [ 51.133452] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 51.133453] nouveau 0000:01:00.0: msvld: init failed, -19 [ 179.307343] device-mapper: uevent: version 1.0.3 [ 179.307456] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 192.022996] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 192.059664] JFS: nTxBlock = 8192, nTxLock = 65536 [ 192.314007] QNX4 filesystem 0.2.3 registered. [ 192.474476] raid6: sse2x4 gen() 3384 MB/s [ 192.542512] raid6: sse2x4 xor() 4384 MB/s [ 192.610516] raid6: sse2x2 gen() 8647 MB/s [ 192.678508] raid6: sse2x2 xor() 6682 MB/s [ 192.746514] raid6: sse2x1 gen() 6972 MB/s [ 192.814508] raid6: sse2x1 xor() 5271 MB/s [ 192.814509] raid6: using algorithm sse2x2 gen() 8647 MB/s [ 192.814510] raid6: .... xor() 6682 MB/s, rmw enabled [ 192.814511] raid6: using ssse3x2 recovery algorithm [ 192.831512] xor: automatically using best checksumming function avx [ 193.071112] Btrfs loaded, crc32c=crc32c-intel [ 354.422400] Non-volatile memory driver v1.3 [ 354.704584] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 356.960979] r8169 0000:02:00.0: invalid large VPD tag 7f at offset 0


Hardware for Linux and BSD

GitHub