[ 1.025310] Linux version 6.13.7-zen1-1-zen (XXX@XXX) (gcc (GCC) 14.2.1 20250207, GNU ld (GNU Binutils) 2.44) #1 ZEN SMP PREEMPT_DYNAMIC Thu, 13 Mar 2025 18:11:42 +0000 [ 1.025339] Command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=HASH_327-C191-087C-27DE-627304CCEE5D rw rootflags=subvol=@ vt.default_red=30,243,166,249,137,245,148,186,88,243,166,249,137,245,148,166 vt.default_grn=30,139,227,226,180,194,226,194,91,139,227,226,180,194,226,173 vt.default_blu=46,168,161,175,250,231,213,222,112,168,161,175,250,231,213,200 quiet loglevel=3 ibt=off [ 1.025348] x86/tme: not enabled by BIOS [ 1.025357] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 1.025362] BIOS-provided physical RAM map: [ 1.025368] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 1.025374] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 1.025380] BIOS-e820: [mem 0x0000000000100000-0x00000000386defff] usable [ 1.025385] BIOS-e820: [mem 0x00000000386df000-0x000000005140efff] reserved [ 1.025390] BIOS-e820: [mem 0x000000005140f000-0x0000000051d3efff] ACPI NVS [ 1.025394] BIOS-e820: [mem 0x0000000051d3f000-0x0000000051ffefff] ACPI data [ 1.025399] BIOS-e820: [mem 0x0000000051fff000-0x0000000051ffffff] usable [ 1.025406] BIOS-e820: [mem 0x0000000052000000-0x00000000687fffff] reserved [ 1.025412] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 1.025419] BIOS-e820: [mem 0x00000000f8000000-0x00000000f9ffffff] reserved [ 1.025424] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 1.025429] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 1.025434] BIOS-e820: [mem 0x0000000100000000-0x000000088fffffff] usable [ 1.025438] NX (Execute Disable) protection: active [ 1.025443] APIC: Static calls initialized [ 1.025448] efi: EFI v2.7 by Dell [ 1.025453] efi: ACPI=0x51ffe000 ACPI 2.0=0x51ffe014 SMBIOS=0x3904c000 TPMFinalLog=0x51c85000 ESRT=0x38fdc718 MEMATTR=0x30515018 INITRD=0x30506798 RNG=0x51f25018 TPMEventLog=0x51f1b018 [ 1.025458] random: crng init done [ 1.025463] efi: Remove mem90: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 1.025467] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 1.025472] efi: Remove mem91: MMIO range=[0xf8000000-0xf9ffffff] (32MB) from e820 map [ 1.025479] e820: remove [mem 0xf8000000-0xf9ffffff] reserved [ 1.025484] efi: Remove mem93: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 1.025488] e820: remove [mem 0xff000000-0xffffffff] reserved [ 1.025493] SMBIOS 3.6 present. [ 1.025497] DMI: Dell Inc. Latitude 7450/00329X, BIOS 1.12.3 02/11/2025 [ 1.025502] DMI: Memory slots populated: 8/8 [ 1.025507] tsc: Detected 2700.000 MHz processor [ 1.025511] tsc: Detected 2688.000 MHz TSC [ 1.025516] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 1.025522] e820: remove [mem 0x000a0000-0x000fffff] usable [ 1.025527] last_pfn = 0x890000 max_arch_pfn = 0x400000000 [ 1.025533] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs [ 1.025538] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 1.025545] x2apic: enabled by BIOS, switching to x2apic ops [ 1.025551] last_pfn = 0x52000 max_arch_pfn = 0x400000000 [ 1.025557] esrt: Reserving ESRT space from 0x0000000038fdc718 to 0x0000000038fdc778. [ 1.025564] Using GB pages for direct mapping [ 1.025569] Secure boot disabled [ 1.025574] RAMDISK: [mem 0x2901b000-0x2a54dfff] ACPI: Early table checksum verification disabled [ 1.025584] ACPI: RSDP 0x0000000051FFE014 000024 (v02 DELL ) [ 1.025590] ACPI: XSDT 0x0000000051F2C228 0001A4 (v01 DELL Dell Inc 00000002 01000013) [ 1.025595] ACPI: FACP 0x0000000051FD8000 000114 (v06 DELL Dell Inc 00000002 01000013) [ 1.025600] ACPI: DSDT 0x0000000051F4F000 085FF3 (v02 DELL Dell Inc 00000002 01000013) [ 1.025606] ACPI: FACS 0x0000000051CAF000 000040 [ 1.025612] ACPI: SSDT 0x0000000051FFC000 000024 (v02 INTEL TxtSsdt 00001000 INTL 20210930) [ 1.025618] ACPI: SSDT 0x0000000051FFB000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) [ 1.025623] ACPI: SSDT 0x0000000051FFA000 000626 (v02 PmRef Cpu0Ist 00003000 INTL 20210930) [ 1.025628] ACPI: SSDT 0x0000000051FF9000 0005E9 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) [ 1.025633] ACPI: SSDT 0x0000000051FF8000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) [ 1.025638] ACPI: SSDT 0x0000000051FF7000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) [ 1.025643] ACPI: SSDT 0x0000000051FF5000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) [ 1.025648] ACPI: SSDT 0x0000000051FF3000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) [ 1.025655] ACPI: SSDT 0x0000000051FF1000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) [ 1.025660] ACPI: SSDT 0x0000000051FF0000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) [ 1.025665] ACPI: SSDT 0x0000000051FEC000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) [ 1.025671] ACPI: SSDT 0x0000000051FEB000 00043C (v02 CIRRUS SPKRAMPS 00000002 INTL 20210930) [ 1.025676] ACPI: DTPR 0x0000000051FEA000 000098 (v01 00000000 00000000) [ 1.025681] ACPI: SSDT 0x0000000051FE5000 004D92 (v02 INTEL PDatTabl 00001000 INTL 20210930) [ 1.025686] ACPI: SSDT 0x0000000051FE4000 000A3D (v02 INTEL IgfxSsdt 00003000 INTL 20210930) [ 1.025691] ACPI: SSDT 0x0000000051FDA000 009B36 (v02 INTEL TcssSsdt 00001000 INTL 20210930) [ 1.025698] ACPI: SSDT 0x0000000051FD9000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) [ 1.025703] ACPI: HPET 0x0000000051FD7000 000038 (v01 DELL Dell Inc 00000002 01000013) [ 1.025708] ACPI: APIC 0x0000000051FD6000 000358 (v05 DELL Dell Inc 00000002 01000013) [ 1.025713] ACPI: MCFG 0x0000000051FD5000 00003C (v01 DELL Dell Inc 00000002 01000013) [ 1.025718] ACPI: SSDT 0x0000000051F4C000 001645 (v02 DELL DellRtd3 00001000 INTL 20210930) [ 1.025724] ACPI: SSDT 0x0000000051F48000 003C4F (v02 DptfTb DptfTabl 00001000 INTL 20210930) [ 1.025729] ACPI: NHLT 0x0000000051FFD000 0002E3 (v00 DELL Dell Inc 00000002 01000013) [ 1.025734] ACPI: SSDT 0x0000000051F46000 0011F4 (v02 DELL UsbCTabl 00001000 INTL 20210930) [ 1.025739] ACPI: LPIT 0x0000000051F45000 0000CC (v01 DELL Dell Inc 00000002 01000013) [ 1.025746] ACPI: WSMT 0x0000000051F44000 000028 (v01 DELL Dell Inc 00000002 01000013) [ 1.025751] ACPI: SSDT 0x0000000051F43000 000CA6 (v02 DELL PtidDevc 00001000 INTL 20210930) [ 1.025756] ACPI: SSDT 0x0000000051F3D000 005E42 (v02 DELL TbtTypeC 00000000 INTL 20210930) [ 1.025762] ACPI: DBGP 0x0000000051F3C000 000034 (v01 DELL Dell Inc 00000002 01000013) [ 1.025767] ACPI: DBG2 0x0000000051F3B000 000054 (v00 DELL Dell Inc 00000002 01000013) [ 1.025772] ACPI: BOOT 0x0000000051F3A000 000028 (v01 DELL CBX3 00000002 01000013) [ 1.025777] ACPI: MSDM 0x0000000051F39000 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 1.025782] ACPI: SSDT 0x0000000051F38000 00060E (v02 DELL Tpm2Tabl 00001000 INTL 20210930) [ 1.025789] ACPI: TPM2 0x0000000051F37000 00004C (v04 DELL Dell Inc 00000002 01000013) [ 1.025794] ACPI: DMAR 0x0000000051F36000 0000A8 (v01 DELL Dell Inc 00000002 01000013) [ 1.025799] ACPI: SSDT 0x0000000051F34000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) [ 1.025804] ACPI: FPDT 0x0000000051F33000 000034 (v01 DELL Dell Inc 00000002 01000013) [ 1.025809] ACPI: SSDT 0x0000000051F32000 000024 (v02 INTEL TxtSsdt 00001000 INTL 20210930) [ 1.025815] ACPI: SSDT 0x0000000051F30000 001251 (v02 DELL xh_Dell_ 00000000 INTL 20210930) [ 1.025820] ACPI: SSDT 0x0000000051F2D000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) [ 1.025825] ACPI: SSDT 0x0000000051F29000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) [ 1.025830] ACPI: UEFI 0x0000000051C83000 00063A (v01 INTEL RstVmdE 00000000 INTL 00000000) [ 1.025837] ACPI: UEFI 0x0000000051C82000 00005C (v01 INTEL RstVmdV 00000000 INTL 00000000) [ 1.025842] ACPI: SDEV 0x0000000051F4E000 000046 (v01 DELL Dell Inc 00000002 01000013) [ 1.025847] ACPI: ASF! 0x0000000051F28000 0000A0 (v32 DELL Dell Inc 00000002 01000013) [ 1.025853] ACPI: PHAT 0x0000000051F27000 000505 (v01 DELL Dell Inc 00000005 MSFT 0100000D) [ 1.025858] ACPI: BGRT 0x0000000051F26000 000038 (v01 DELL Dell Inc 00000002 01000013) [ 1.025863] ACPI: Reserving FACP table memory at [mem 0x51fd8000-0x51fd8113] ACPI: Reserving DSDT table memory at [mem 0x51f4f000-0x51fd4ff2] ACPI: Reserving FACS table memory at [mem 0x51caf000-0x51caf03f] ACPI: Reserving SSDT table memory at [mem 0x51ffc000-0x51ffc023] ACPI: Reserving SSDT table memory at [mem 0x51ffb000-0x51ffb38b] ACPI: Reserving SSDT table memory at [mem 0x51ffa000-0x51ffa625] ACPI: Reserving SSDT table memory at [mem 0x51ff9000-0x51ff95e8] ACPI: Reserving SSDT table memory at [mem 0x51ff8000-0x51ff81aa] ACPI: Reserving SSDT table memory at [mem 0x51ff7000-0x51ff7393] ACPI: Reserving SSDT table memory at [mem 0x51ff5000-0x51ff6bae] ACPI: Reserving SSDT table memory at [mem 0x51ff3000-0x51ff461f] ACPI: Reserving SSDT table memory at [mem 0x51ff1000-0x51ff2348] ACPI: Reserving SSDT table memory at [mem 0x51ff0000-0x51ff0fba] ACPI: Reserving SSDT table memory at [mem 0x51fec000-0x51fefbc7] ACPI: Reserving SSDT table memory at [mem 0x51feb000-0x51feb43b] ACPI: Reserving DTPR table memory at [mem 0x51fea000-0x51fea097] ACPI: Reserving SSDT table memory at [mem 0x51fe5000-0x51fe9d91] ACPI: Reserving SSDT table memory at [mem 0x51fe4000-0x51fe4a3c] ACPI: Reserving SSDT table memory at [mem 0x51fda000-0x51fe3b35] ACPI: Reserving SSDT table memory at [mem 0x51fd9000-0x51fd90f8] ACPI: Reserving HPET table memory at [mem 0x51fd7000-0x51fd7037] ACPI: Reserving APIC table memory at [mem 0x51fd6000-0x51fd6357] ACPI: Reserving MCFG table memory at [mem 0x51fd5000-0x51fd503b] ACPI: Reserving SSDT table memory at [mem 0x51f4c000-0x51f4d644] ACPI: Reserving SSDT table memory at [mem 0x51f48000-0x51f4bc4e] ACPI: Reserving NHLT table memory at [mem 0x51ffd000-0x51ffd2e2] ACPI: Reserving SSDT table memory at [mem 0x51f46000-0x51f471f3] ACPI: Reserving LPIT table memory at [mem 0x51f45000-0x51f450cb] ACPI: Reserving WSMT table memory at [mem 0x51f44000-0x51f44027] ACPI: Reserving SSDT table memory at [mem 0x51f43000-0x51f43ca5] ACPI: Reserving SSDT table memory at [mem 0x51f3d000-0x51f42e41] ACPI: Reserving DBGP table memory at [mem 0x51f3c000-0x51f3c033] ACPI: Reserving DBG2 table memory at [mem 0x51f3b000-0x51f3b053] ACPI: Reserving BOOT table memory at [mem 0x51f3a000-0x51f3a027] ACPI: Reserving MSDM table memory at [mem 0x51f39000-0x51f39054] ACPI: Reserving SSDT table memory at [mem 0x51f38000-0x51f3860d] ACPI: Reserving TPM2 table memory at [mem 0x51f37000-0x51f3704b] ACPI: Reserving DMAR table memory at [mem 0x51f36000-0x51f360a7] ACPI: Reserving SSDT table memory at [mem 0x51f34000-0x51f3519f] ACPI: Reserving FPDT table memory at [mem 0x51f33000-0x51f33033] ACPI: Reserving SSDT table memory at [mem 0x51f32000-0x51f32023] ACPI: Reserving SSDT table memory at [mem 0x51f30000-0x51f31250] ACPI: Reserving SSDT table memory at [mem 0x51f2d000-0x51f2f819] ACPI: Reserving SSDT table memory at [mem 0x51f29000-0x51f2b8d2] ACPI: Reserving UEFI table memory at [mem 0x51c83000-0x51c83639] ACPI: Reserving UEFI table memory at [mem 0x51c82000-0x51c8205b] ACPI: Reserving SDEV table memory at [mem 0x51f4e000-0x51f4e045] ACPI: Reserving ASF! table memory at [mem 0x51f28000-0x51f2809f] ACPI: Reserving PHAT table memory at [mem 0x51f27000-0x51f27504] ACPI: Reserving BGRT table memory at [mem 0x51f26000-0x51f26037] APIC: Switched APIC routing to: cluster x2apic [ 1.026129] No NUMA configuration found [ 1.026134] Faking a node at [mem 0x0000000000000000-0x000000088fffffff] NODE_DATA(0) allocated [mem 0x88ffd52c0-0x88fffffff] Zone ranges: [ 1.026150] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000088fffffff] Device empty [ 1.026172] Movable zone start for each node [ 1.026177] Early memory node ranges [ 1.026183] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000386defff] node 0: [mem 0x0000000051fff000-0x0000000051ffffff] node 0: [mem 0x0000000100000000-0x000000088fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000088fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 1.026213] On node 0, zone DMA: 97 pages in unavailable ranges [ 1.026220] On node 0, zone DMA32: 39200 pages in unavailable ranges [ 1.026226] On node 0, zone Normal: 24576 pages in unavailable ranges [ 1.026231] ACPI: PM-Timer IO Port: 0x1808 [ 1.026236] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) [ 1.026241] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 1.026247] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.026252] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.026257] ACPI: Using ACPI (MADT) for SMP configuration information [ 1.026262] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 1.026269] e820: update [mem 0x30418000-0x3043afff] usable ==> reserved [ 1.026274] TSC deadline timer available [ 1.026280] CPU topo: Max. logical packages: 1 [ 1.026285] CPU topo: Max. logical dies: 1 [ 1.026290] CPU topo: Max. dies per package: 1 [ 1.026295] CPU topo: Max. threads per core: 2 [ 1.026300] CPU topo: Num. cores per package: 12 [ 1.026305] CPU topo: Num. threads per package: 14 [ 1.026310] CPU topo: Allowing 14 present CPUs plus 0 hotplug CPUs [ 1.026315] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x30418000-0x3043afff] PM: hibernation: Registered nosave memory: [mem 0x386df000-0x5140efff] PM: hibernation: Registered nosave memory: [mem 0x5140f000-0x51d3efff] PM: hibernation: Registered nosave memory: [mem 0x51d3f000-0x51ffefff] PM: hibernation: Registered nosave memory: [mem 0x52000000-0x687fffff] PM: hibernation: Registered nosave memory: [mem 0x68800000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] [mem 0x68800000-0xfed1ffff] available for PCI devices [ 1.026372] Booting paravirtualized kernel on bare hardware [ 1.026379] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.026384] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:14 nr_cpu_ids:14 nr_node_ids:1 [ 1.026389] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288 [ 1.026394] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152 [ 1.026400] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 [ 1.026405] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 -- -- [ 1.026411] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=HASH_327-C191-087C-27DE-627304CCEE5D rw rootflags=subvol=@ vt.default_red=30,243,166,249,137,245,148,186,88,243,166,249,137,245,148,166 vt.default_grn=30,139,227,226,180,194,226,194,91,139,227,226,180,194,226,173 vt.default_blu=46,168,161,175,250,231,213,222,112,168,161,175,250,231,213,200 quiet loglevel=3 ibt=off [ 1.026417] Unknown kernel command line parameters "BOOT_IMAGE=/@/boot/vmlinuz-linux-zen", will be passed to user space. [ 1.026423] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 1.026429] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 1.026434] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 1.026439] Fallback order for Node 0: 0 [ 1.026444] Built 1 zonelists, mobility grouping on. Total pages: 8160894 [ 1.026450] Policy zone: Normal [ 1.026455] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 1.026460] software IO TLB: area num 16. [ 1.026465] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=14, Nodes=1 [ 1.026472] ftrace: allocating 49241 entries in 193 pages [ 1.026477] ftrace: allocated 193 pages with 3 groups [ 1.026482] Dynamic Preempt: full [ 1.026487] rcu: Preemptible hierarchical RCU implementation. [ 1.026493] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=14. [ 1.026499] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 1.026504] Trampoline variant of Tasks RCU enabled. [ 1.026509] Rude variant of Tasks RCU enabled. [ 1.026515] Tracing variant of Tasks RCU enabled. [ 1.026521] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.026526] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=14 [ 1.026531] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14. [ 1.026537] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14. [ 1.026542] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14. [ 1.026548] NR_IRQS: 524544, nr_irqs: 2168, preallocated irqs: 16 [ 1.026553] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 1.026558] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 1.026563] Console: colour dummy device 80x25 [ 1.026570] printk: legacy console [tty0] enabled [ 1.026575] ACPI: Core revision 20240827 [ 1.026580] hpet: HPET dysfunctional in PC10. Force disabled. [ 1.026585] APIC: Switch to symmetric I/O mode setup [ 1.026591] DMAR: Host address width 42 [ 1.026596] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 [ 1.026601] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e [ 1.026606] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 [ 1.026611] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde [ 1.026618] DMAR: SATC flags: 0x1 [ 1.026624] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 [ 1.026629] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 [ 1.026634] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.026639] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.026645] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns [ 1.026650] Calibrating delay loop (skipped), value calculated using timer frequency.. 5376.00 BogoMIPS (lpj=2688000) [ 1.026655] CPU0: Thermal monitoring enabled (TM1) [ 1.026662] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 1.026667] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.026673] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.026678] process: using mwait in idle threads [ 1.026683] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.026689] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 1.026694] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.026699] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.026705] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.026711] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.026717] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.026721] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.026727] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 1.026731] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' [ 1.026737] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.026742] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 1.026747] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 [ 1.026752] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. [ 1.026758] Freeing SMP alternatives memory: 52K [ 1.026764] pid_max: default: 32768 minimum: 301 [ 1.026768] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf [ 1.026773] landlock: Up and running. [ 1.026778] Yama: becoming mindful. [ 1.026783] LSM support for eBPF active [ 1.026788] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.026792] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.026797] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 165U (family: 0x6, model: 0xaa, stepping: 0x4) [ 1.026802] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. [ 1.026807] core: cpu_core PMU driver: [ 1.026812] ... version: 5 [ 1.026816] ... bit width: 48 [ 1.026821] ... generic registers: 8 [ 1.026827] ... value mask: 0000ffffffffffff [ 1.026832] ... max period: 00007fffffffffff [ 1.026837] ... fixed-purpose events: 4 [ 1.026841] ... event mask: 0001000f000000ff [ 1.026846] signal: max sigframe size: 3632 [ 1.026851] Estimated ratio of average max frequency by base frequency (times 1024): 1858 [ 1.026855] rcu: Hierarchical SRCU implementation. [ 1.026860] rcu: Max phase no-delay instances is 400. [ 1.026865] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level [ 1.026869] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.026874] smp: Bringing up secondary CPUs ... [ 1.026880] smpboot: x86: Booting SMP configuration: [ 1.026885] .... node #0, CPUs: #2 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 [ 1.026890] core: cpu_atom PMU driver: [ 1.026897] ... version: 5 [ 1.026902] ... bit width: 48 [ 1.026906] ... generic registers: 8 [ 1.026911] ... value mask: 0000ffffffffffff [ 1.026915] ... max period: 00007fffffffffff [ 1.026920] ... fixed-purpose events: 3 [ 1.026925] ... event mask: 00000007000000ff [ 1.026929] #1 #3 [ 1.026935] smp: Brought up 1 node, 14 CPUs [ 1.026940] smpboot: Total of 14 processors activated (75264.00 BogoMIPS) [ 1.026945] Memory: 31903868K/32643576K available (20480K kernel code, 2695K rwdata, 14936K rodata, 4448K init, 5660K bss, 713744K reserved, 0K cma-reserved) [ 1.026950] devtmpfs: initialized [ 1.026957] x86/mm: Memory block size: 128MB [ 1.026962] ACPI: PM: Registering ACPI NVS region [mem 0x5140f000-0x51d3efff] (9633792 bytes) [ 1.026968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.026973] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 1.026977] pinctrl core: initialized pinctrl subsystem [ 1.026982] PM: RTC time: 22:23:44, date: 2025-03-22 [ 1.026987] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.026993] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 1.026998] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.027006] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.027024] thermal_sys: Registered thermal governor 'fair_share' [ 1.027029] thermal_sys: Registered thermal governor 'bang_bang' [ 1.027034] thermal_sys: Registered thermal governor 'step_wise' [ 1.027038] thermal_sys: Registered thermal governor 'user_space' [ 1.027043] thermal_sys: Registered thermal governor 'power_allocator' [ 1.027048] cpuidle: using governor ladder [ 1.027053] cpuidle: using governor menu [ 1.027058] Simple Boot Flag at 0x47 set to 0x80 [ 1.027063] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.027070] PCI: ECAM [mem 0xc0000000-0xcdffffff] (base 0xc0000000) for domain 0000 [bus 00-df] PCI: Using configuration type 1 for base access [ 1.027080] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.027086] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.027091] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.027096] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.027101] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.027105] ACPI: Added _OSI(Module Device) [ 1.027110] ACPI: Added _OSI(Processor Device) [ 1.027115] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.027120] ACPI: Added _OSI(Processor Aggregator Device) [ 1.027125] ACPI: 27 ACPI AML tables successfully acquired and loaded [ 1.027131] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ [ 1.027137] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ [ 1.027142] ACPI: EC: EC started [ 1.027147] ACPI: EC: interrupt blocked [ 1.027153] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 1.027158] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 1.027164] ACPI: Interpreter enabled [ 1.027169] ACPI: PM: (supports S0 S4 S5) [ 1.027174] ACPI: Using IOAPIC for interrupt routing [ 1.027181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.027186] PCI: Ignoring E820 reservations for host bridge windows [ 1.027192] ACPI: Enabled 10 GPEs in block 00 to 7F [ 1.027197] ACPI: Enabled 8 GPEs in block 80 to DF [ 1.027210] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource [ 1.027216] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.DBTR: New power resource [ 1.027222] ACPI: \_SB_.PC00.XHCI.RHUB.SS02.UWW3: New power resource [ 1.027228] ACPI: \_SB_.PC00.RP07.PXP_: New power resource [ 1.027233] ACPI: \_SB_.PC00.RP08.PXSX.WRST: New power resource [ 1.027238] ACPI: \_SB_.PC00.TBT0: New power resource [ 1.027244] ACPI: \_SB_.PC00.TBT1: New power resource [ 1.027249] ACPI: \_SB_.PC00.D3C_: New power resource [ 1.027254] ACPI: \PIN_: New power resource [ 1.027261] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-df]) [ 1.027406] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 1.027667] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x70000000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] pci_bus 0000:00: root bus resource [bus 00-df] pci 0000:00:00.0: [8086:7d02] type 00 class 0x060000 conventional PCI endpoint [ 1.028335] pci 0000:00:02.0: [8086:7d45] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 1.028431] pci 0000:00:02.0: BAR 0 [mem 0x501a000000-0x501affffff 64bit pref] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 1.028576] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: PME# supported from D0 D3hot [ 1.028659] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs [ 1.028748] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint [ 1.028790] pci 0000:00:04.0: BAR 0 [mem 0x501d280000-0x501d29ffff 64bit] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint [ 1.028879] pci 0000:00:05.0: BAR 0 [mem 0x501c000000-0x501cffffff 64bit] pci 0000:00:05.0: enabling Extended Tags [ 1.028963] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port [ 1.029012] pci 0000:00:07.0: PCI bridge to [bus 01-38] pci 0000:00:07.0: bridge window [mem 0x76000000-0x7bffffff] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.029172] pci 0000:00:07.0: PTM enabled (root), 4ns granularity [ 1.029217] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port [ 1.029257] pci 0000:00:07.3: PCI bridge to [bus 39-70] pci 0000:00:07.3: bridge window [mem 0x70000000-0x75ffffff] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold [ 1.029416] pci 0000:00:07.3: PTM enabled (root), 4ns granularity [ 1.029463] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint [ 1.029502] pci 0000:00:08.0: BAR 0 [mem 0x501d2e1000-0x501d2e1fff 64bit] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint [ 1.029583] pci 0000:00:0a.0: BAR 0 [mem 0x501d240000-0x501d27ffff 64bit] pci 0000:00:0a.0: enabling Extended Tags [ 1.029664] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint [ 1.029704] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] pci 0000:00:0b.0: BAR 4 [mem 0x501d2e0000-0x501d2e0fff 64bit] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint [ 1.029826] pci 0000:00:0d.0: BAR 0 [mem 0x501d2c0000-0x501d2cffff 64bit] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 1.029908] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint [ 1.029946] pci 0000:00:0d.3: BAR 0 [mem 0x501d200000-0x501d23ffff 64bit] pci 0000:00:0d.3: BAR 2 [mem 0x501d2df000-0x501d2dffff 64bit] pci 0000:00:0d.3: supports D1 D2 [ 1.030073] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.030117] pci 0000:00:0e.0: [8086:7d0b] type 00 class 0x010400 PCIe Root Complex Integrated Endpoint [ 1.030157] pci 0000:00:0e.0: BAR 0 [mem 0x5018000000-0x5019ffffff 64bit] pci 0000:00:0e.0: BAR 2 [mem 0x7c000000-0x7cffffff] pci 0000:00:0e.0: BAR 4 [mem 0x501b000000-0x501bffffff 64bit] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint [ 1.030322] pci 0000:00:12.0: BAR 0 [mem 0x501d2b0000-0x501d2bffff 64bit] pci 0000:00:12.0: PME# supported from D0 D3hot [ 1.030404] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint [ 1.030445] pci 0000:00:14.0: BAR 0 [mem 0x501d2a0000-0x501d2affff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.030527] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint [ 1.030565] pci 0000:00:14.2: BAR 0 [mem 0x501d2d4000-0x501d2d7fff 64bit] pci 0000:00:14.2: BAR 2 [mem 0x501d2de000-0x501d2defff 64bit] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint [ 1.030686] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint [ 1.030853] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint [ 1.031083] pci 0000:00:16.0: BAR 0 [mem 0x501d2db000-0x501d2dbfff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 1.031259] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint [ 1.031338] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] pci 0000:00:16.3: BAR 1 [mem 0x7d101000-0x7d101fff] pci 0000:00:1c.0: [8086:7e3f] type 01 class 0x060400 PCIe Root Port [ 1.031595] pci 0000:00:1c.0: PCI bridge to [bus 71] pci 0000:00:1c.0: bridge window [mem 0x7d000000-0x7d0fffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.031828] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 1.031919] pci 0000:00:1e.0: [8086:7e25] type 00 class 0x078000 conventional PCI endpoint [ 1.032070] pci 0000:00:1e.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:1e.2: [8086:7e27] type 00 class 0x0c8000 conventional PCI endpoint [ 1.032280] pci 0000:00:1e.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:1f.0: [8086:7e03] type 00 class 0x060100 conventional PCI endpoint [ 1.032454] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040380 conventional PCI endpoint [ 1.032532] pci 0000:00:1f.3: BAR 0 [mem 0x501d2d0000-0x501d2d3fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0x501d000000-0x501d1fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 1.032770] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint [ 1.032847] pci 0000:00:1f.4: BAR 0 [mem 0x501d2d8000-0x501d2d80ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint [ 1.033098] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] pci 0000:00:07.0: PCI bridge to [bus 01-38] pci 0000:00:07.3: PCI bridge to [bus 39-70] pci 0000:71:00.0: [8086:272b] type 00 class 0x028000 PCIe Endpoint [ 1.033424] pci 0000:71:00.0: BAR 0 [mem 0x7d000000-0x7d003fff 64bit] pci 0000:71:00.0: PME# supported from D0 D3hot D3cold [ 1.033583] pci 0000:71:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1c.0 (capable of 15.753 Gb/s with 16.0 GT/s PCIe x1 link) [ 1.033663] pci 0000:00:1c.0: PCI bridge to [bus 71] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) [ 1.033679] Low-power S0 idle used by default for system suspend [ 1.033685] ACPI: EC: interrupt unblocked [ 1.033691] ACPI: EC: event unblocked [ 1.033697] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 1.033703] ACPI: EC: GPE=0x6e [ 1.033709] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC initialization complete [ 1.033718] ACPI: \_SB_.PC00.LPCB.ECDV: EC: Used to handle transactions and events [ 1.033723] iommu: Default domain type: Translated [ 1.033729] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.033735] SCSI subsystem initialized [ 1.033741] libata version 3.00 loaded. [ 1.033747] ACPI: bus type USB registered [ 1.033752] usbcore: registered new interface driver usbfs [ 1.033758] usbcore: registered new interface driver hub [ 1.033763] usbcore: registered new device driver usb [ 1.033767] EDAC MC: Ver: 3.0.0 [ 1.033773] efivars: Registered efivars operations [ 1.033781] NetLabel: Initializing [ 1.033786] NetLabel: domain hash size = 128 [ 1.033791] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.033796] NetLabel: unlabeled traffic allowed by default [ 1.033801] mctp: management component transport protocol core [ 1.033807] NET: Registered PF_MCTP protocol family [ 1.033812] PCI: Using ACPI for IRQ routing [ 1.033817] PCI: pci_cache_line_size set to 64 bytes [ 1.033897] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window [ 1.033905] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x30418000-0x33ffffff] e820: reserve RAM buffer [mem 0x386df000-0x3bffffff] e820: reserve RAM buffer [mem 0x52000000-0x53ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.034089] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.034169] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.034178] vgaarb: loaded [ 1.034184] clocksource: Switched to clocksource tsc-early [ 1.034190] VFS: Disk quotas dquot_6.6.0 [ 1.034196] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.034205] pnp: PnP ACPI init [ 1.034294] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.034369] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.034450] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.034530] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 1.034752] system 00:05: [mem 0xc0000000-0xcfffffff] has been reserved [ 1.034822] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 1.034892] system 00:05: [mem 0xfc800000-0xfc81ffff] could not be reserved [ 1.034963] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 1.035051] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.035134] system 00:06: [io 0x2000-0x20fe] has been reserved [ 1.035143] pnp: PnP ACPI: found 8 devices [ 1.035152] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.035158] NET: Registered PF_INET protocol family [ 1.035164] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.035170] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.035176] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.035182] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.035188] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.035194] TCP: Hash tables configured (established 262144 bind 65536) [ 1.035199] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 1.035207] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 1.035213] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 1.035218] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.035224] NET: Registered PF_XDP protocol family [ 1.035303] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-38] add_size 1000 [ 1.035381] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 39-70] add_size 1000 [ 1.035457] pci 0000:00:02.0: VF BAR 0 [mem 0x501e000000-0x5024ffffff 64bit pref]: assigned [ 1.035534] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned [ 1.035631] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned [ 1.035695] pci 0000:00:15.0: BAR 0 [mem 0x501d2d9000-0x501d2d9fff 64bit]: assigned [ 1.035739] pci 0000:00:15.3: BAR 0 [mem 0x501d2da000-0x501d2dafff 64bit]: assigned [ 1.035783] pci 0000:00:1e.0: BAR 0 [mem 0x501d2dc000-0x501d2dcfff 64bit]: assigned [ 1.035827] pci 0000:00:1e.2: BAR 0 [mem 0x501d2dd000-0x501d2ddfff 64bit]: assigned [ 1.035868] pci 0000:00:1f.5: BAR 0 [mem 0x7d100000-0x7d100fff]: assigned [ 1.035910] pci 0000:00:07.0: PCI bridge to [bus 01-38] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] pci 0000:00:07.0: bridge window [mem 0x76000000-0x7bffffff] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] pci 0000:00:07.3: PCI bridge to [bus 39-70] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] pci 0000:00:07.3: bridge window [mem 0x70000000-0x75ffffff] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 71] pci 0000:00:1c.0: bridge window [mem 0x7d000000-0x7d0fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x70000000-0xbfffffff window] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0x76000000-0x7bffffff] pci_bus 0000:01: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] pci_bus 0000:39: resource 0 [io 0x5000-0x5fff] pci_bus 0000:39: resource 1 [mem 0x70000000-0x75ffffff] pci_bus 0000:39: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] pci_bus 0000:71: resource 1 [mem 0x7d000000-0x7d0fffff] PCI: CLS 0 bytes, default 64 [ 1.036746] DMAR: Intel-IOMMU force enabled due to platform opt in [ 1.036750] DMAR: No RMRR found [ 1.036753] DMAR: No ATSR found [ 1.036757] DMAR: IOMMU feature sc_support inconsistent [ 1.036760] DMAR: dmar0: Using Queued invalidation [ 1.036764] DMAR: dmar1: Using Queued invalidation [ 1.036768] Trying to unpack rootfs image as initramfs... [ 1.036808] pci 0000:00:02.0: Adding to iommu group 0 [ 1.036850] pci 0000:00:00.0: Adding to iommu group 1 [ 1.036892] pci 0000:00:04.0: Adding to iommu group 2 [ 1.036932] pci 0000:00:05.0: Adding to iommu group 3 [ 1.036972] pci 0000:00:07.0: Adding to iommu group 4 [ 1.037018] pci 0000:00:07.3: Adding to iommu group 5 [ 1.037060] pci 0000:00:08.0: Adding to iommu group 6 [ 1.037101] pci 0000:00:0a.0: Adding to iommu group 7 [ 1.037141] pci 0000:00:0b.0: Adding to iommu group 8 [ 1.037184] pci 0000:00:0d.0: Adding to iommu group 9 [ 1.037224] pci 0000:00:0d.3: Adding to iommu group 9 [ 1.037266] pci 0000:00:0e.0: Adding to iommu group 10 [ 1.037307] pci 0000:00:12.0: Adding to iommu group 11 [ 1.037348] pci 0000:00:14.0: Adding to iommu group 12 [ 1.037388] pci 0000:00:14.2: Adding to iommu group 12 [ 1.037427] pci 0000:00:15.0: Adding to iommu group 13 [ 1.037466] pci 0000:00:15.3: Adding to iommu group 13 [ 1.037507] pci 0000:00:16.0: Adding to iommu group 14 [ 1.037549] pci 0000:00:16.3: Adding to iommu group 14 [ 1.037588] pci 0000:00:1c.0: Adding to iommu group 15 [ 1.037626] pci 0000:00:1e.0: Adding to iommu group 16 [ 1.037666] pci 0000:00:1e.2: Adding to iommu group 16 [ 1.037707] pci 0000:00:1f.0: Adding to iommu group 17 [ 1.037748] pci 0000:00:1f.3: Adding to iommu group 17 [ 1.037791] pci 0000:00:1f.4: Adding to iommu group 17 [ 1.037831] pci 0000:00:1f.5: Adding to iommu group 17 [ 1.037873] pci 0000:71:00.0: Adding to iommu group 18 [ 1.037878] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.037881] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.037885] software IO TLB: mapped [mem 0x000000002501b000-0x000000002901b000] (64MB) [ 1.037889] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns [ 1.037892] clocksource: Switched to clocksource tsc [ 1.037895] Initialise system trusted keyrings [ 1.037899] Key type blacklist registered [ 1.037902] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.037906] fuse: init (API version 7.41) [ 1.037909] integrity: Platform Keyring initialized [ 1.037912] integrity: Machine keyring initialized [ 1.037917] Key type asymmetric registered [ 1.037920] Asymmetric key parser 'x509' registered [ 1.037923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.037927] io scheduler mq-deadline registered [ 1.037930] io scheduler kyber registered [ 1.037933] io scheduler bfq registered [ 1.037936] ledtrig-cpu: registered to indicate activity on CPUs [ 1.037976] pcieport 0000:00:07.0: PME: Signaling with IRQ 122 [ 1.038022] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.038065] pcieport 0000:00:07.3: PME: Signaling with IRQ 123 [ 1.038106] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.038148] pcieport 0000:00:1c.0: PME: Signaling with IRQ 124 [ 1.038152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.038155] ACPI: AC: AC Adapter [AC] (on-line) [ 1.038159] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.038162] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.038170] ACPI: button: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.038177] ACPI: button: Sleep Button [SBTN] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.038220] serial 0000:00:12.0: enabling device (0000 -> 0002) [ 1.038261] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 1.038266] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A [ 1.038270] hpet_acpi_add: no address or irqs in _CRS [ 1.038273] Non-volatile memory driver v1.3 [ 1.038278] Linux agpgart interface v0.103 [ 1.038330] tpm_tis STM0176:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 1.038335] Freeing initrd memory: 21708K [ 1.038339] ACPI: battery: Slot [BAT0] (battery present) [ 1.038379] ahci 0000:00:0e.0: version 3.0 [ 1.038420] ahci 0000:00:0e.0: probe with driver ahci failed with error -12 [ 1.038424] ACPI: bus type drm_connector registered [ 1.038465] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.038505] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 1.038544] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.038583] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.038621] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 1.038660] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed [ 1.038705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13 [ 1.038738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.038769] usb usb1: Product: xHCI Host Controller [ 1.038798] usb usb1: Manufacturer: Linux 6.13.7-zen1-1-zen xhci-hcd [ 1.038826] usb usb1: SerialNumber: ... [ 1.038879] hub 1-0:1.0: USB hub found [ 1.038921] hub 1-0:1.0: 1 port detected [ 1.038958] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13 [ 1.038989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.039023] usb usb2: Product: xHCI Host Controller [ 1.039053] usb usb2: Manufacturer: Linux 6.13.7-zen1-1-zen xhci-hcd [ 1.039082] usb usb2: SerialNumber: ... [ 1.039130] hub 2-0:1.0: USB hub found [ 1.039173] hub 2-0:1.0: 4 ports detected [ 1.039213] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.039252] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.039294] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.039334] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.039374] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.039414] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed [ 2.202073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13 [ 2.202268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.202390] usb usb3: Product: xHCI Host Controller [ 2.202502] usb usb3: Manufacturer: Linux 6.13.7-zen1-1-zen xhci-hcd [ 2.202622] usb usb3: SerialNumber: ... [ 2.202807] hub 3-0:1.0: USB hub found [ 2.202977] hub 3-0:1.0: 12 ports detected [ 2.203220] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13 [ 2.203447] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.203661] usb usb4: Product: xHCI Host Controller [ 2.203874] usb usb4: Manufacturer: Linux 6.13.7-zen1-1-zen xhci-hcd [ 2.204034] usb usb4: SerialNumber: ... [ 2.204166] hub 4-0:1.0: USB hub found [ 2.204290] hub 4-0:1.0: 2 ports detected [ 2.204300] usbcore: registered new interface driver usbserial_generic [ 2.204309] usbserial: USB Serial support registered for generic [ 2.204628] rtc_cmos 00:01: RTC can wake from S4 [ 2.204857] rtc_cmos 00:01: registered as rtc0 [ 2.205018] rtc_cmos 00:01: setting system clock to 2025-03-22T22:23:45 UTC (1742682225) [ 2.205165] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 2.205180] intel_pstate: Intel P-state driver initializing [ 2.205192] intel_pstate: HWP enabled [ 2.205363] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic [ 2.205380] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0 [ 2.205391] fbcon: Deferring console take-over [ 2.205548] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 2.205568] hid: raw HID events driver (C) Jiri Kosina [ 2.205579] drop_monitor: Initializing network drop monitor service [ 2.205590] NET: Registered PF_INET6 protocol family [ 2.205601] Segment Routing with IPv6 [ 2.205611] RPL Segment Routing with IPv6 [ 2.205622] In-situ OAM (IOAM) with IPv6 [ 2.205629] NET: Registered PF_PACKET protocol family [ 2.205637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 2.205645] microcode: Current revision: 0x00000020 [ 2.205655] microcode: Updated early from: 0x0000001c [ 2.205663] IPI shorthand broadcast: enabled [ 2.205671] sched_clock: Marking stable (739000981, 6212853)->(772728880, -27515046) [ 2.205679] registered taskstats version 1 [ 2.205686] Loading compiled-in X.509 certificates [ 2.205695] Loaded X.509 cert 'Build time autogenerated kernel key: c4b1911d7383e8c6f0c5b6fa212256f91816d454' [ 2.205702] zswap: loaded using pool zstd/zsmalloc [ 2.205710] Demotion targets for Node 0: null [ 2.205717] Key type .fscrypt registered [ 2.205727] Key type fscrypt-provisioning registered [ 2.205734] integrity: Loading X.509 certificate: UEFI:db [ 2.205742] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487' [ 2.205749] integrity: Loading X.509 certificate: UEFI:db [ 2.205757] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd' [ 2.205765] integrity: Loading X.509 certificate: UEFI:db [ 2.205772] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 2.205779] integrity: Loading X.509 certificate: UEFI:db [ 2.205786] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 2.205793] PM: Magic number: 1:792:401 [ 2.205929] acpi ACPI0007:1a: hash matches [ 2.205942] RAS: Correctable Errors collector initialized. [ 2.205962] clk: Disabling unused clocks [ 2.205970] PM: genpd: Disabling unused power domains [ 2.205973] Freeing unused decrypted memory: 2028K [ 2.205977] Freeing unused kernel image (initmem) memory: 4448K [ 2.205980] Write protecting the kernel read-only data: 36864k [ 2.205983] Freeing unused kernel image (rodata/data gap) memory: 1448K [ 2.205989] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.205993] rodata_test: all tests were successful [ 2.205996] Run /init as init process [ 2.205999] with arguments: [ 2.206005] /init [ 2.206008] with environment: [ 2.206012] HOME=/ [ 2.206015] TERM=linux [ 2.206018] BOOT_IMAGE=/@/boot/vmlinuz-linux-zen [ 2.206145] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 2.206266] i2c_dev: i2c /dev entries driver [ 2.206314] raid6: skipped pq benchmark and selected avx2x4 [ 2.206318] raid6: using avx2x2 recovery algorithm [ 2.206321] xor: automatically using best checksumming function avx [ 2.206324] Btrfs loaded, zoned=yes, fsverity=yes [ 2.206989] wmi_bus wmi_bus-PNP0C14:02: [Firmware Bug]: WQBC data block query control method not found [ 2.206995] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.206999] i8042: Warning: Keylock active [ 2.207004] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.207007] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.207086] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 [ 2.207138] pci_bus 10000:e0: root bus resource [bus e0-ff] pci_bus 10000:e0: root bus resource [mem 0x7c000000-0x7cffffff] pci_bus 10000:e0: root bus resource [mem 0x501b002000-0x501bffffff 64bit] pci 10000:e0:06.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 2.207905] pci 10000:e0:06.0: Adding to iommu group 10 [ 2.208036] pci 10000:e0:06.2: [8086:7ecb] type 01 class 0x060400 PCIe Root Port [ 2.208113] pci 10000:e0:06.2: PCI bridge to [bus e1] pci 10000:e0:06.2: bridge window [io 0x0000-0x0fff] pci 10000:e0:06.2: bridge window [mem 0x7c000000-0x7c0fffff] pci 10000:e0:06.2: PME# supported from D0 D3hot D3cold [ 2.208349] pci 10000:e0:06.2: PTM enabled (root), 4ns granularity [ 2.208419] pci 10000:e0:06.2: Adding to iommu group 10 [ 2.208475] pci 10000:e0:06.2: Primary bus is hard wired to 0 [ 2.208539] pci 10000:e1:00.0: [1344:5416] type 00 class 0x010802 PCIe Endpoint [ 2.208589] pci 10000:e1:00.0: BAR 0 [mem 0x7c000000-0x7c003fff 64bit] pci 10000:e1:00.0: Adding to iommu group 10 [ 2.208680] pci 10000:e0:06.2: PCI bridge to [bus e1] pci 10000:e0:06.2: Primary bus is hard wired to 0 [ 2.208729] cryptd: max_cpu_qlen set to 1000 [ 2.208732] AES CTR mode by8 optimization enabled [ 2.208796] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 2.208849] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.208854] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.208920] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) [ 2.208981] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.209069] usb 3-2: New USB device found, idVendor=1050, idProduct=0406, bcdDevice= 5.43 [ 2.209158] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.209230] usb 3-2: Product: YubiKey FIDO+CCID [ 2.209293] usb 3-2: Manufacturer: Yubico [ 2.209372] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002) [ 2.209437] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 2.209490] intel-lpss 0000:00:1e.2: enabling device (0004 -> 0006) [ 2.209542] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 2.209589] pci 10000:e0:06.2: bridge window [mem 0x7c000000-0x7c0fffff]: assigned [ 2.209638] pci 10000:e0:06.2: bridge window [io size 0x1000]: can't assign; no space [ 2.209683] pci 10000:e0:06.2: bridge window [io size 0x1000]: failed to assign [ 2.209748] pci 10000:e1:00.0: BAR 0 [mem 0x7c000000-0x7c003fff 64bit]: assigned [ 2.209803] pci 10000:e0:06.2: PCI bridge to [bus e1] pci 10000:e0:06.2: bridge window [mem 0x7c000000-0x7c0fffff] pcieport 10000:e0:06.2: can't derive routing for PCI INT C [ 2.209985] pcieport 10000:e0:06.2: PCI INT C: no GSI [ 2.210057] pcieport 10000:e0:06.2: PME: Signaling with IRQ 162 [ 2.210105] vmd 0000:00:0e.0: Bound to PCI domain 10000 [ 2.210213] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.210284] usb 4-1: New USB device found, idVendor=1005, idProduct=b128, bcdDevice= 1.10 [ 2.210343] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.210400] usb 4-1: Product: FLASH DRIVE [ 2.210456] usb 4-1: Manufacturer: USB3.0 [ 2.210509] usb 4-1: SerialNumber: ... [ 2.210585] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.210662] scsi host0: usb-storage 4-1:1.0 [ 2.210668] usbcore: registered new interface driver usb-storage [ 2.210682] usbcore: registered new interface driver uas [ 2.210685] input: VEN_06CB:00 06CB:CEEE Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-VEN_06CB:00/0018:06CB:CEEE.0001/input/input6 [ 2.210689] input: VEN_06CB:00 06CB:CEEE Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-VEN_06CB:00/0018:06CB:CEEE.0001/input/input7 [ 2.210751] hid-generic 0018:06CB:CEEE.0001: input,hidraw0: I2C HID v1.00 Mouse [VEN_06CB:00 06CB:CEEE] on i2c-VEN_06CB:00 [ 2.210887] nvme nvme0: pci function 10000:e1:00.0 [ 2.211114] pcieport 10000:e0:06.2: can't derive routing for PCI INT A [ 2.211353] nvme 10000:e1:00.0: PCI INT A: no GSI [ 2.211374] dw-apb-uart.2: ttyS5 at MMIO 0x501d2dc000 (irq = 16, base_baud = 6250000) is a 16550A [ 2.211534] nvme nvme0: allocated 64 MiB host memory buffer (16 segments). [ 2.211855] usb 3-5: new full-speed USB device number 3 using xhci_hcd [ 2.211888] input: VEN_06CB:00 06CB:CEEE Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-VEN_06CB:00/0018:06CB:CEEE.0001/input/input9 [ 2.211904] input: VEN_06CB:00 06CB:CEEE Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-VEN_06CB:00/0018:06CB:CEEE.0001/input/input10 [ 2.212132] hid-multitouch 0018:06CB:CEEE.0001: input,hidraw0: I2C HID v1.00 Mouse [VEN_06CB:00 06CB:CEEE] on i2c-VEN_06CB:00 [ 2.212300] nvme nvme0: 14/0/0 default/read/poll queues [ 2.212320] nvme0n1: p1 p2 p3 p4 p5 [ 2.212623] usb 3-5: not running at top speed; connect to a high speed hub [ 2.212823] usb 3-5: New USB device found, idVendor=2ac1, idProduct=20c9, bcdDevice= 0.10 [ 2.212981] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.213129] usb 3-5: Product: Lattice AI USB 2.0 [ 2.213269] usb 3-5: Manufacturer: SLS [ 2.213455] usb 3-8: new high-speed USB device number 4 using xhci_hcd [ 2.213468] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 2.213574] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=4 [ 2.213677] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.213777] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.213875] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.213961] hid-generic 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.214052] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.214134] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.214215] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.214294] hid-sensor-hub 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.214398] usb 3-8: New USB device found, idVendor=0a5c, idProduct=5865, bcdDevice= 1.02 [ 2.214500] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.214603] usb 3-8: Product: 58200 [ 2.214702] usb 3-8: Manufacturer: Broadcom Corp [ 2.214799] usb 3-8: SerialNumber: ... [ 2.214830] BTRFS: device fsid HASH_327-C191-087C-27DE-627304CCEE5D devid 1 transid 135 /dev/nvme0n1p5 (259:5) scanned by mount (400) [ 2.214836] BTRFS info (device nvme0n1p5): first mount of filesystem HASH_327-C191-087C-27DE-627304CCEE5D [ 2.214842] BTRFS info (device nvme0n1p5): using crc32c (crc32c-intel) checksum algorithm [ 2.214851] BTRFS info (device nvme0n1p5): using free-space-tree [ 2.214857] BTRFS info (device nvme0n1p5): start tree-log replay [ 2.214977] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 2.214987] BTRFS info (device nvme0n1p5): checking UUID tree [ 2.215138] usb 3-10: New USB device found, idVendor=8087, idProduct=0036, bcdDevice= 0.00 [ 2.215234] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.215326] hid-generic 0003:1050:0406.0006: hiddev96,hidraw5: USB HID v1.10 Device [Yubico YubiKey FIDO+CCID] on usb-0000:00:14.0-2/input0 [ 2.215335] usbcore: registered new interface driver usbhid [ 2.215343] usbhid: USB HID core driver [ 2.523100] scsi 0:0:0:0: CD-ROM USB3.0 FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS [ 2.524077] scsi 0:0:0:1: Direct-Access USB3.0 FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS [ 2.558442] sd 0:0:0:1: [sda] 51707904 512-byte logical blocks: (26.5 GB/24.7 GiB) [ 2.558581] sd 0:0:0:1: [sda] Write Protect is off [ 2.558679] sd 0:0:0:1: [sda] Mode Sense: 45 00 00 00 [ 2.558771] sd 0:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.558861] sda: sda1 [ 2.558870] sd 0:0:0:1: [sda] Attached SCSI removable disk [ 3.252847] zram: Added device: zram0 [ 3.253430] device-mapper: uevent: version 1.0.3 [ 3.253441] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 3.253490] loop: module loaded [ 3.312008] BTRFS info (device nvme0n1p5 state M): use zstd compression, level 3 [ 3.471095] mousedev: PS/2 mouse device common for all mice [ 3.488020] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) [ 3.490647] input: Intel HID events as /devices/platform/INTC1077:00/input/input12 [ 3.490673] intel-hid INTC1077:00: platform supports 5 button array [ 3.495058] Consider using thermal netlink events interface [ 3.495081] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.497088] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.502165] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input13 [ 3.502196] int3472-discrete INT3472:0c: GPIO type 0x12 unknown; the sensor may not work [ 3.503023] int3472-discrete INT3472:0c: unknown \_SB.GPI0 pin number mismatch _DSM 17 resource 369 [ 3.503143] int3472-discrete INT3472:0c: GPIO type 0x02 unknown; the sensor may not work [ 3.505091] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.505179] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.505256] zram0: detected capacity change from 0 to 63918080 [ 3.505266] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.505333] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.505404] pci 0000:00:08.0: Setting to D3hot [ 3.512428] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.512585] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.512959] pci 0000:00:05.0: Setting to D3hot [ 3.524167] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.529995] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.536140] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff] caller igen6_probe+0x20a/0x9d0 [igen6_edac] mapping multiple BARs [ 3.536174] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) [ 3.536185] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) [ 3.536194] EDAC igen6: v2.5.1 [ 3.536205] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.548730] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.548912] pci 0000:00:0b.0: Setting to D3hot [ 3.739031] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.750425] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.751980] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.752113] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.752211] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices. [ 3.752332] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.752428] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.752522] pci 0000:00:14.2: enabling device (0000 -> 0002) [ 3.752651] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform [ 3.752761] intel_pmc_core INT33A1:00: initialized [ 3.752858] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.753848] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.753948] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) [ 3.754072] ACPI: bus type thunderbolt registered [ 3.754084] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.754180] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.754279] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.754372] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.754463] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.754569] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.754672] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20250115*MTL_CLIENT_SILICON-release*1905*ci_tag_ud202504_vpu_rc_20250115_1905*ae83b65d01c [ 3.754796] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS [ 3.754900] sr 0:0:0:0: [sr0] scsi3-mmc drive: 0x/0x dvd-ram caddy [ 3.755029] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.755040] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 3.755151] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 3.755254] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.756682] intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002) [ 3.756827] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.756932] intel-ipu6 0000:00:05.0: IPU6 in secure mode touch 0x80000000 mask 0x0 [ 3.757049] Bluetooth: Core ver 2.22 [ 3.757060] NET: Registered PF_BLUETOOTH protocol family [ 3.757070] Bluetooth: HCI device and connection manager initialized [ 3.757085] Bluetooth: HCI socket layer initialized [ 3.757094] Bluetooth: L2CAP socket layer initialized [ 3.757104] Bluetooth: SCO socket layer initialized [ 3.757113] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.757223] intel-ipu6 0000:00:05.0: FW version: 20230925 [ 3.757329] ACPI: battery: new extension: Dell DDV Battery Extension [ 3.757339] intel-ipu6 0000:00:05.0: Found supported sensor OVTI02E1:00 [ 3.757442] intel-ipu6 0000:00:05.0: Connected 1 cameras [ 3.757543] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.757652] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.757759] intel-ipu6 0000:00:05.0: Sending BOOT_LOAD to CSE [ 3.757878] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.757976] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.758093] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.758107] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.758119] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.758133] intel-ipu6 0000:00:05.0: Sending AUTHENTICATE_RUN to CSE [ 3.758260] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.758370] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.758484] intel_rapl_msr: PL4 support detected. [ 3.758497] intel_rapl_common: Found RAPL domain package [ 3.758509] intel_rapl_common: Found RAPL domain core [ 3.758521] intel_rapl_common: Found RAPL domain psys [ 3.758532] intel-ipu6 0000:00:05.0: CSE authenticate_run done [ 3.758652] intel-ipu6 0000:00:05.0: IPU6-v4[7d19] hardware version 6 [ 3.759043] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.759174] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.759305] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.759431] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.759551] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.759664] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.759777] Adding 31959036k swap on /dev/zram0. Priority:100 extents:1 across:31959036k SSDsc [ 3.759791] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.759910] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.760112] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.760229] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.760355] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.760475] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.760588] iTCO_vendor_support: vendor-support=0 [ 3.760601] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 3.760615] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.760627] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.760639] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.760653] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.760775] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.760891] Creating 1 MTD partitions on "0000:00:1f.5": [ 3.760905] 0x000000000000-0x000004000000 : "BIOS" [ 3.760928] input: Dell Privacy Driver as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/HASH_81F-4092-3EA9-1A5C-71732B19BEFB/input/input14 [ 3.760957] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) [ 3.761144] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.761309] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.761549] intel_rapl_common: Found RAPL domain package [ 3.761567] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input15 [ 3.761578] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.761792] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 3.762863] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.763121] Intel(R) Wireless WiFi driver for Linux [ 3.765089] iwlwifi 0000:71:00.0: enabling device (0000 -> 0002) [ 3.765277] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.765424] mc: Linux media interface: v0.10 [ 3.765439] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.765553] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.765695] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.765846] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.765976] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.766117] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.766253] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 [ 3.766282] videodev: Linux video capture interface: v2.00 [ 3.766295] usbcore: registered new interface driver btusb [ 3.766305] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.766459] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.766588] Bluetooth: hci0: Device revision is 0 [ 3.766600] Bluetooth: hci0: Secure boot is enabled [ 3.766611] Bluetooth: hci0: OTP lock is disabled [ 3.766629] Bluetooth: hci0: API lock is enabled [ 3.766645] Bluetooth: hci0: Debug lock is disabled [ 3.766673] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 3.766683] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 16362 [ 3.766694] Bluetooth: hci0: DSM reset method type: 0x01 [ 3.766705] Bluetooth: hci0: Found device firmware: intel/ibt-0291-0291.sfi [ 3.766717] Bluetooth: hci0: Boot Address: 0x100800 [ 3.766737] Bluetooth: hci0: Firmware Version: 149-7.25 [ 3.766766] iwlwifi 0000:71:00.0: Detected crf-id 0x2001910, cnv-id 0x2001910 wfpm id 0x80000000 [ 3.766951] iwlwifi 0000:71:00.0: PCI dev 272b/40f0, rev=0x472, rfid=0x112200 [ 3.767108] iwlwifi 0000:71:00.0: Detected Intel(R) Wi-Fi 7 BE200 320MHz [ 3.767278] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.767428] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.767553] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.767674] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.769116] iwlwifi 0000:71:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 3.769317] iwlwifi 0000:71:00.0: loaded firmware version 94.62990553.0 gl-c0-fm-c0-94.ucode op_mode iwlmvm [ 3.769486] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2 [ 3.769674] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.769809] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset [ 3.791828] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.793305] pps_core: LinuxPPS API ver. 1 registered [ 3.793321] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 3.793331] dell_laptop: Using i8042 filter function for receiving events [ 3.793341] PTP clock support registered [ 3.793351] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2 [ 3.793476] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3.793575] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3.825011] ACPI: battery: new extension: Dell Primary Battery Extension [ 3.994504] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d45) display version 14.00 stepping C0 [ 4.181402] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 4.181575] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.181694] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.181810] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 4.181926] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 4.182790] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 4.182885] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.182991] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) [ 4.183099] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 4.183192] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 4.183280] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0 [ 4.183383] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 4.183484] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 4.183584] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 4.183682] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0 [ 4.183782] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 [ 4.183883] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media [ 4.183981] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled [ 4.184084] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled [ 4.184186] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled [ 4.184287] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 4.184611] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 [ 4.184621] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.184630] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 4.184639] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 4.184725] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 4.184813] fbcon: i915drmfb (fb0) is primary device [ 4.184826] fbcon: Deferring console take-over [ 4.184836] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.184946] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.185053] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 4.185141] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 4.185226] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 4.185312] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 4.218010] snd_hda_codec_realtek hdaudioC0D0: ALC289: picked fixup for PCI SSID 1028:0cc1 [ 5.227453] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1.wmfw: format 3 timestamp 0x6128e16b [ 5.228244] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time [ 5.228597] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, rXXX.XXX.XXX.XXX, svn 1) [ 5.228944] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms [ 5.229236] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1-spkid0.bin: v0.43.1 [ 5.229440] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\dchunyi\Documents\Dell\Oasis\tuning\default_tuning\10280CBD_230621_V01_A01.bin [ 5.229598] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads [ 5.229781] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=5542 [ 5.229937] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17 [ 5.230058] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 10280CC1, BST: 1, VSPK: 1, CH: R, FW EN: 1, SPKID: 0 [ 5.230168] snd_hda_codec_realtek hdaudioC0D0: bound spi0-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41]) [ 5.230281] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1.wmfw: format 3 timestamp 0x6128e16b [ 5.230398] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time [ 5.230505] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms [ 5.230611] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10280cc1-spkid0.bin: v0.43.1 [ 5.230723] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\dchunyi\Documents\Dell\Oasis\tuning\default_tuning\10280CBD_230621_V01_A01.bin [ 5.230814] iwlwifi 0000:71:00.0: loaded PNVM version 97f4ce1a [ 5.230908] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=5622 [ 5.230984] iwlwifi 0000:71:00.0: Detected RF FM, rfid=0x112200 [ 5.231076] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17 [ 5.231152] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 10280CC1, BST: 1, VSPK: 0, CH: L, FW EN: 1, SPKID: 0 [ 5.231227] snd_hda_codec_realtek hdaudioC0D0: bound spi0-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41]) [ 5.231299] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC289: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker [ 5.231370] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.231442] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.231505] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.231557] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.231606] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 5.231656] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 5.231705] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b [ 5.231755] iwlwifi 0000:71:00.0: base HW address: C444647521A67BF2F81658CA5ADD7FFD [ 5.231817] iwlwifi 0000:71:00.0 wlp113s0f0: renamed from wlan0 [ 5.231879] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 5.231941] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 5.280812] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 5.280823] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 5.280919] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 5.280973] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 5.280979] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 5.280988] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 5.280996] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 5.721022] Bluetooth: hci0: Waiting for firmware download to complete [ 5.721136] Bluetooth: hci0: Firmware loaded in 1928240 usecs [ 5.721151] Bluetooth: hci0: Waiting for device to boot [ 5.775015] Bluetooth: hci0: Device booted in 51746 usecs [ 5.777009] Bluetooth: hci0: dsbr: enable: 0x00 value: 0x00 [ 5.778008] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0291-0291.ddc [ 5.779014] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5.782017] Bluetooth: hci0: Firmware timestamp 2025.7 buildtype 1 build 76693 [ 5.782060] Bluetooth: hci0: Firmware SHA1: 0x9919f053 [ 5.786008] Bluetooth: hci0: Fseq status: Success (0x00) [ 5.786029] Bluetooth: hci0: Fseq executed: XXX.XXX.XXX.XXX [ 5.786053] Bluetooth: hci0: Fseq BT Top: XXX.XXX.XXX.XXX [ 5.884029] Bluetooth: hci0: Failed to read codec capabilities (-95) [ 5.888013] Bluetooth: hci0: Failed to read codec capabilities (-95) [ 6.576034] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.576089] Bluetooth: BNEP filters: protocol multicast [ 6.576101] Bluetooth: BNEP socket layer initialized [ 6.576111] Bluetooth: MGMT ver 1.23 [ 6.579017] NET: Registered PF_ALG protocol family [ 6.642015] NET: Registered PF_QIPCRTR protocol family [ 7.060027] iwlwifi 0000:71:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 8.649012] nvme nvme0: using unchecked data buffer [ 8.650008] block nvme0n1: No UUID available providing old NGUID [ 15.450116] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 15.450617] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 15.450868] platform INT3472:01: deferred probe pending: int3472-discrete: Failed to get GPIO [ 20.599017] Bluetooth: RFCOMM TTY layer initialized [ 20.599104] Bluetooth: RFCOMM socket layer initialized [ 20.599118] Bluetooth: RFCOMM ver 1.11 [ 21.512026] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 24.306094] i915 0000:00:02.0: [drm] *ERROR* GT1: GSC proxy component didn't bind within the expected timeout [ 24.306649] i915 0000:00:02.0: [drm] *ERROR* GT1: GSC proxy handler failed to init [ 35.713032] wlp113s0f0: authenticate with 93894AF8F50711A9AA2A7F3818EB2955 (local address=C444647521A67BF2F81658CA5ADD7FFD) [ 35.714016] wlp113s0f0: send auth to 93894AF8F50711A9AA2A7F3818EB2955 (try 1/3) [ 35.805114] wlp113s0f0: authenticate with 93894AF8F50711A9AA2A7F3818EB2955 (local address=C444647521A67BF2F81658CA5ADD7FFD) [ 35.805262] wlp113s0f0: send auth to 93894AF8F50711A9AA2A7F3818EB2955 (try 1/3) [ 35.841147] wlp113s0f0: authenticated [ 35.841202] wlp113s0f0: associate with 93894AF8F50711A9AA2A7F3818EB2955 (try 1/3) [ 35.848046] wlp113s0f0: RX AssocResp from 93894AF8F50711A9AA2A7F3818EB2955 (capab=0x1511 status=0 aid=8) [ 35.852023] wlp113s0f0: associated [ 35.934033] wlp113s0f0: Limiting TX power to 23 (23 - 0) dBm as advertised by 93894AF8F50711A9AA2A7F3818EB2955 [ 127.511020] zoom[10469]: segfault at 580a29e99f40 ip 0000580f74c21cb9 sp 00007ffc3bebb600 error 4 in zoom[51f4cb9,580f74795000+b0a1000] likely on CPU 2 (core 12, socket 0) [ 127.511147] Code: 24 48 89 04 24 b8 1e 00 00 00 0f 16 04 24 48 f7 f7 49 8b 04 24 0f 29 44 24 20 48 8b 04 d0 48 89 d5 48 85 c0 0f 84 f7 00 00 00 <48> 8b 08 8b 71 08 eb 27 0f 1f 80 00 00 00 00 48 8b 09 48 85 c9 0f [ 634.502016] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 634.530014] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 634.530187] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 1724.673032] usbio: loading out-of-tree module taints kernel. [ 1724.673175] usbio: module verification failed: signature and/or required key missing - tainting kernel [ 1724.681020] usbio-bridge 3-5:1.0: bank:0 map:0x0000001f [ 1724.681435] usbio-bridge 3-5:1.0: bank:1 map:0x0000001f [ 1724.681594] usbio-bridge 3-5:1.0: bank:2 map:0x0000001f [ 1724.681712] usbio-bridge 3-5:1.0: bank:3 map:0x00000001 [ 1724.681822] usbio-bridge 3-5:1.0: USB Bridge device init success [ 1724.681930] usbcore: registered new interface driver usbio-bridge [ 1724.683019] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 1724.683535] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 1767.794038] i2c_usbio: unknown parameter 'gpio-usbio' ignored [ 1767.798016] usbio-i2c usbio-i2c.29.auto: hid INTC10D2 uid VIC0 new uid1 [ 1767.804536] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 1767.805457] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 1767.805585] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 1767.805689] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2748.003029] nvme nvme0: I/O tag 541 (321d) QID 10 timeout, completion polled [ 2786.151020] tun: Universal TUN/TAP device driver, 1.6 [ 2882.133025] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2882.133647] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2882.153026] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2882.153570] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2882.181021] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2882.181413] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2882.202024] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2882.202702] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2893.314039] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2893.314514] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2893.324794] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2893.325290] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2893.337027] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2893.337463] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.292111] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.292783] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.332126] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.332672] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.368162] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.368653] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.380074] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.380403] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.402025] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.402517] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.411022] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.411426] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2895.535120] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2895.535695] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2896.205044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2896.205592] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2896.415121] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2896.415696] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2896.452027] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2896.452342] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2896.574062] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2896.574773] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2897.798051] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2897.798560] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2897.883047] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2897.883429] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2897.919113] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2897.919508] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2898.043044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2898.043572] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2898.829043] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2898.829590] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2898.883037] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2898.883470] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2898.920027] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2898.920342] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2899.042044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2899.042856] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2899.820044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2899.820479] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2899.912044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2899.912431] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2899.959038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2899.959487] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2900.081093] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2900.081856] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2900.846091] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2900.846539] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2900.938038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2900.938477] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2900.975024] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2900.975355] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2901.091046] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2901.091421] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2901.330047] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2901.330541] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2901.393034] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2901.393428] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2901.430101] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2901.430520] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2901.552069] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2901.552719] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.215038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.215434] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.282132] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.282600] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.319040] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.319602] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.443047] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.443662] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.804061] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.804536] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.872039] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.872511] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2902.908033] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2902.908386] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2903.031036] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2903.031422] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2903.972038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2903.972478] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.044045] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.044543] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.092116] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.092623] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.214039] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.214461] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.771047] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.771475] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.849044] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.849466] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2904.888046] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2904.888659] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2905.011055] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2905.011471] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2905.873129] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2905.873746] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2905.983048] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2905.983677] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2906.021024] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2906.021447] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2906.143060] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2906.143592] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2906.753051] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2906.753605] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2906.868045] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2906.868498] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2906.904056] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2906.904616] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2907.027043] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2907.027491] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2907.776030] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2907.776703] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2907.859048] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2907.859578] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2907.907041] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2907.907493] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2908.022042] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2908.022821] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2908.266108] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2908.266665] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2908.352062] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2908.352736] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2908.388048] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2908.388848] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2908.511128] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2908.511584] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2910.517154] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2910.517682] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2910.820042] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2910.820576] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2910.943038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2910.943588] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2910.990092] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2910.990549] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.113112] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.113806] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.351104] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.351670] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.442036] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.442510] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.479037] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.479509] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.595045] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.595596] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.836029] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.836525] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.930146] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.930694] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2911.968057] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2911.968545] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2912.084038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2912.084540] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2912.324060] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2912.324513] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2912.427045] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2912.427487] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2912.479055] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2912.479531] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 2913.257038] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 2913.257509] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3287.507040] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3287.507602] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3788.461140] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work [ 3788.461695] int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring [ 3852.574024] wlp113s0f0: deauthenticating from 93894AF8F50711A9AA2A7F3818EB2955 by local choice (Reason: 3=DEAUTH_LEAVING)