[ 0.000000] Linux version 6.5.6-300.fc39.x86_64 (XXX@XXX) (gcc (GCC) 13.2.1 20230918 (Red Hat 13.2.1-3), GNU ld version 2.40-13.fc39) #1 SMP PREEMPT_DYNAMIC Fri Oct 6 19:57:21 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64 root=UUID=HASH_8F6-19DB-36F9-C72E-9193EACF5BA1 ro rootflags=subvol=root rhgb quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000065fd1fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000065fd2000-0x0000000065fd2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000065fd3000-0x000000007806ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078070000-0x00000000780b5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000780b6000-0x0000000078796fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078797000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. Precision 5520/080VVT, BIOS 1.36.0 12/18/2023 [ 0.000000] tsc: Detected 2700.000 MHz processor [ 0.000000] tsc: Detected 2699.909 MHz TSC [ 0.000939] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000942] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000951] last_pfn = 0x87e800 max_arch_pfn = 0x400000000 [ 0.000955] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.000957] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001255] last_pfn = 0x65fd2 max_arch_pfn = 0x400000000 [ 0.009567] found SMP MP-table at [mem 0x000fcf00-0x000fcf0f] Using GB pages for direct mapping [ 0.009716] RAMDISK: [mem 0x3301a000-0x35804fff] ACPI: Early table checksum verification disabled [ 0.009725] ACPI: RSDP 0x00000000000EB710 000024 (v02 DELL ) [ 0.009729] ACPI: XSDT 0x000000007807E0D0 00011C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.009735] ACPI: FACP 0x00000000780A3A78 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.009740] ACPI: DSDT 0x000000007807E278 0257FF (v02 DELL CBX3 01072009 INTL 20160422) [ 0.009743] ACPI: FACS 0x0000000078794180 000040 [ 0.009746] ACPI: APIC 0x00000000780A3B88 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.009749] ACPI: FPDT 0x00000000780A3C48 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.009751] ACPI: FIDT 0x00000000780A3C90 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.009755] ACPI: MCFG 0x00000000780A3D40 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.009758] ACPI: HPET 0x00000000780A3D80 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.009760] ACPI: SSDT 0x00000000780A3DB8 0004B8 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.009764] ACPI: BOOT 0x00000000780A4270 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.009766] ACPI: SSDT 0x00000000780A4298 0012FE (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.009769] ACPI: SSDT 0x00000000780A5598 002959 (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.009772] ACPI: HPET 0x00000000780A7EF8 000038 (v01 INTEL SKL 00000001 MSFT 0000005F) [ 0.009775] ACPI: SSDT 0x00000000780A7F30 000B8C (v02 INTEL xh_rvp11 00000000 INTL 20160422) [ 0.009778] ACPI: UEFI 0x00000000780A8AC0 000042 (v01 00000000 00000000) [ 0.009781] ACPI: SSDT 0x00000000780A8B08 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.009784] ACPI: LPIT 0x00000000780A99E8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.009787] ACPI: WSMT 0x00000000780A9A80 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.009790] ACPI: SSDT 0x00000000780A9AA8 00011E (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.009793] ACPI: SSDT 0x00000000780A9BC8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.009796] ACPI: SSDT 0x00000000780A9E68 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.009799] ACPI: SSDT 0x00000000780ACE70 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.009802] ACPI: DBGP 0x00000000780AD380 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.009805] ACPI: DBG2 0x00000000780AD3B8 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.009808] ACPI: SSDT 0x00000000780AD410 005322 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.009810] ACPI: MSDM 0x00000000780B2738 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.009813] ACPI: SLIC 0x00000000780B2790 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.009816] ACPI: TCPA 0x00000000780B2908 000032 (v02 ALASKA NAPAASF 00000000 MSFT 01000013) [ 0.009819] ACPI: SSDT 0x00000000780B2940 0000AE (v02 SgRef SgPeg 00001000 INTL 20160422) [ 0.009822] ACPI: NHLT 0x00000000780B29F0 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.009825] ACPI: SSDT 0x00000000780B2A20 001C70 (v01 OptRef OptTabl 00001000 INTL 20160422) [ 0.009828] ACPI: ASF! 0x00000000780B4690 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.009831] ACPI: DMAR 0x00000000780B4730 000110 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.009833] ACPI: Reserving FACP table memory at [mem 0x780a3a78-0x780a3b83] ACPI: Reserving DSDT table memory at [mem 0x7807e278-0x780a3a76] ACPI: Reserving FACS table memory at [mem 0x78794180-0x787941bf] ACPI: Reserving APIC table memory at [mem 0x780a3b88-0x780a3c43] ACPI: Reserving FPDT table memory at [mem 0x780a3c48-0x780a3c8b] ACPI: Reserving FIDT table memory at [mem 0x780a3c90-0x780a3d3b] ACPI: Reserving MCFG table memory at [mem 0x780a3d40-0x780a3d7b] ACPI: Reserving HPET table memory at [mem 0x780a3d80-0x780a3db7] ACPI: Reserving SSDT table memory at [mem 0x780a3db8-0x780a426f] ACPI: Reserving BOOT table memory at [mem 0x780a4270-0x780a4297] ACPI: Reserving SSDT table memory at [mem 0x780a4298-0x780a5595] ACPI: Reserving SSDT table memory at [mem 0x780a5598-0x780a7ef0] ACPI: Reserving HPET table memory at [mem 0x780a7ef8-0x780a7f2f] ACPI: Reserving SSDT table memory at [mem 0x780a7f30-0x780a8abb] ACPI: Reserving UEFI table memory at [mem 0x780a8ac0-0x780a8b01] ACPI: Reserving SSDT table memory at [mem 0x780a8b08-0x780a99e5] ACPI: Reserving LPIT table memory at [mem 0x780a99e8-0x780a9a7b] ACPI: Reserving WSMT table memory at [mem 0x780a9a80-0x780a9aa7] ACPI: Reserving SSDT table memory at [mem 0x780a9aa8-0x780a9bc5] ACPI: Reserving SSDT table memory at [mem 0x780a9bc8-0x780a9e66] ACPI: Reserving SSDT table memory at [mem 0x780a9e68-0x780ace69] ACPI: Reserving SSDT table memory at [mem 0x780ace70-0x780ad37c] ACPI: Reserving DBGP table memory at [mem 0x780ad380-0x780ad3b3] ACPI: Reserving DBG2 table memory at [mem 0x780ad3b8-0x780ad40b] ACPI: Reserving SSDT table memory at [mem 0x780ad410-0x780b2731] ACPI: Reserving MSDM table memory at [mem 0x780b2738-0x780b278c] ACPI: Reserving SLIC table memory at [mem 0x780b2790-0x780b2905] ACPI: Reserving TCPA table memory at [mem 0x780b2908-0x780b2939] ACPI: Reserving SSDT table memory at [mem 0x780b2940-0x780b29ed] ACPI: Reserving NHLT table memory at [mem 0x780b29f0-0x780b2a1c] ACPI: Reserving SSDT table memory at [mem 0x780b2a20-0x780b468f] ACPI: Reserving ASF! table memory at [mem 0x780b4690-0x780b472f] ACPI: Reserving DMAR table memory at [mem 0x780b4730-0x780b483f] ACPI: DMI detected: DELL Precision 5520 (force ACPI _REV to 5) [ 0.009993] No NUMA configuration found [ 0.009994] Faking a node at [mem 0x0000000000000000-0x000000087e7fffff] NODE_DATA(0) allocated [mem 0x87e7d5000-0x87e7fffff] Zone ranges: [ 0.010240] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000087e7fffff] Device empty [ 0.010246] Movable zone start for each node [ 0.010249] Early memory node ranges [ 0.010250] node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x0000000065fd1fff] node 0: [mem 0x0000000100000000-0x000000087e7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000087e7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010282] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.052484] On node 0, zone Normal: 8238 pages in unavailable ranges [ 0.052541] On node 0, zone Normal: 6144 pages in unavailable ranges [ 0.052563] Reserving Intel graphics memory at [mem 0x7b800000-0x7f7fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.053048] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.053050] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.053051] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.053051] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.053052] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.053053] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.053054] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.053054] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.053081] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.053084] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.053086] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.053090] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.053091] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.053095] TSC deadline timer available [ 0.053095] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.053108] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x65fd2000-0x65fd2fff] PM: hibernation: Registered nosave memory: [mem 0x65fd3000-0x7806ffff] PM: hibernation: Registered nosave memory: [mem 0x78070000-0x780b5fff] PM: hibernation: Registered nosave memory: [mem 0x780b6000-0x78796fff] PM: hibernation: Registered nosave memory: [mem 0x78797000-0x7f7fffff] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0x7f800000-0xefffffff] available for PCI devices [ 0.053129] Booting paravirtualized kernel on bare hardware [ 0.053131] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.060609] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.060937] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.060943] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.060946] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.060965] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64 root=UUID=HASH_8F6-19DB-36F9-C72E-9193EACF5BA1 ro rootflags=subvol=root rhgb quiet [ 0.061043] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64", will be passed to user space. [ 0.061089] random: crng init done [ 0.063608] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.064878] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.064987] Fallback order for Node 0: 0 [ 0.064990] Built 1 zonelists, mobility grouping on. Total pages: 8146354 [ 0.064992] Policy zone: Normal [ 0.065152] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.065158] software IO TLB: area num 8. [ 0.127847] Memory: 32357904K/33103288K available (18432K kernel code, 3276K rwdata, 14436K rodata, 4508K init, 17396K bss, 745124K reserved, 0K cma-reserved) [ 0.128090] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.128100] Kernel/User page tables isolation: enabled [ 0.128131] ftrace: allocating 53440 entries in 209 pages [ 0.137370] ftrace: allocated 209 pages with 4 groups [ 0.138143] Dynamic Preempt: voluntary [ 0.138177] rcu: Preemptible hierarchical RCU implementation. [ 0.138178] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.138179] Trampoline variant of Tasks RCU enabled. [ 0.138180] Rude variant of Tasks RCU enabled. [ 0.138180] Tracing variant of Tasks RCU enabled. [ 0.138181] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.138182] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.141658] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.141882] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.142096] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.145217] Console: colour VGA+ 80x25 [ 0.145219] printk: console [tty0] enabled [ 0.145264] ACPI: Core revision 20230331 [ 0.145455] ACPI: OSL: Overriding _REV return value to 5 [ 0.145540] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.145611] APIC: Switch to symmetric I/O mode setup [ 0.145613] DMAR: Host address width 39 [ 0.145614] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.145620] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.145623] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.145627] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.145629] DMAR: RMRR base: 0x00000077d8b000 end: 0x00000077daafff [ 0.145630] DMAR: RMRR base: 0x00000078a00000 end: 0x00000078c49fff [ 0.145632] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff [ 0.145633] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.145634] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.145636] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.145637] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.145638] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.147212] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.147214] x2apic enabled [ 0.147225] Switched APIC routing to cluster x2apic. [ 0.151210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.155626] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns [ 0.155631] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=2699909) [ 0.155655] x86/cpu: SGX disabled by BIOS. [ 0.155660] CPU0: Thermal monitoring enabled (TM1) [ 0.155708] process: using mwait in idle threads [ 0.155711] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.155712] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.155717] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.155719] Spectre V2 : Mitigation: IBRS [ 0.155720] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.155721] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.155722] RETBleed: Mitigation: IBRS [ 0.155723] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.155725] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.155726] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.155736] MDS: Mitigation: Clear CPU buffers [ 0.155737] TAA: Mitigation: TSX disabled [ 0.155738] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.155744] SRBDS: Mitigation: Microcode [ 0.155747] GDS: Vulnerable: No microcode [ 0.155754] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.155756] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.155757] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.155759] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.155760] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.155761] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.155764] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.155765] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.155767] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.190076] Freeing SMP alternatives memory: 48K [ 0.190079] pid_max: default: 32768 minimum: 301 [ 0.190122] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity [ 0.190140] Yama: becoming mindful. [ 0.190144] SELinux: Initializing. [ 0.190186] LSM support for eBPF active [ 0.190188] landlock: Up and running. [ 0.190239] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.190272] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.190690] smpboot: CPU0: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.190851] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.190869] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.190883] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.190898] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.190922] ... version: 4 [ 0.190923] ... bit width: 48 [ 0.190924] ... generic registers: 4 [ 0.190924] ... value mask: 0000ffffffffffff [ 0.190926] ... max period: 00007fffffffffff [ 0.190927] ... fixed-purpose events: 3 [ 0.190928] ... event mask: 000000070000000f [ 0.191050] signal: max sigframe size: 2032 [ 0.191067] Estimated ratio of average max frequency by base frequency (times 1024): 1213 [ 0.191093] rcu: Hierarchical SRCU implementation. [ 0.191094] rcu: Max phase no-delay instances is 400. [ 0.191833] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.191914] smp: Bringing up secondary CPUs ... [ 0.192016] smpboot: x86: Booting SMP configuration: [ 0.192017] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.193983] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.193983] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.194665] smp: Brought up 1 node, 8 CPUs [ 0.194665] smpboot: Max logical packages: 1 [ 0.194665] smpboot: Total of 8 processors activated (43198.54 BogoMIPS) [ 0.196504] devtmpfs: initialized [ 0.196653] x86/mm: Memory block size: 128MB [ 0.199654] ACPI: PM: Registering ACPI NVS region [mem 0x65fd2000-0x65fd2fff] (4096 bytes) [ 0.199658] ACPI: PM: Registering ACPI NVS region [mem 0x780b6000-0x78796fff] (7213056 bytes) [ 0.199847] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.199852] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.199913] pinctrl core: initialized pinctrl subsystem [ 0.200127] PM: RTC time: 18:29:24, date: 2024-03-10 [ 0.200546] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.200767] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.200771] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.200774] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.200798] thermal_sys: Registered thermal governor 'fair_share' [ 0.200798] thermal_sys: Registered thermal governor 'bang_bang' [ 0.200798] thermal_sys: Registered thermal governor 'step_wise' [ 0.200798] thermal_sys: Registered thermal governor 'user_space' [ 0.200798] cpuidle: using governor menu [ 0.200816] Simple Boot Flag at 0x47 set to 0x80 [ 0.200816] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.200816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.200816] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.200816] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as E820 entry [ 0.200816] PCI: Using configuration type 1 for base access [ 0.201089] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.201659] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.204659] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.204659] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.204659] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.204659] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.204827] cryptd: max_cpu_qlen set to 1000 [ 0.204827] raid6: skipped pq benchmark and selected avx2x4 [ 0.204827] raid6: using avx2x2 recovery algorithm [ 0.204827] ACPI: Added _OSI(Module Device) [ 0.204827] ACPI: Added _OSI(Processor Device) [ 0.204827] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.204827] ACPI: Added _OSI(Processor Aggregator Device) [ 0.250459] ACPI: 13 ACPI AML tables successfully acquired and loaded [ 0.256555] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.264953] ACPI: Dynamic OEM Table Load: [ 0.264962] ACPI: SSDT 0xFFFF9B6CC0F3E800 000630 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.266328] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.267457] ACPI: Dynamic OEM Table Load: [ 0.267464] ACPI: SSDT 0xFFFF9B6CC0F4BC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.269065] ACPI: Dynamic OEM Table Load: [ 0.269071] ACPI: SSDT 0xFFFF9B6CC0F3E000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.270719] ACPI: Dynamic OEM Table Load: [ 0.270725] ACPI: SSDT 0xFFFF9B6CC17E5600 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.274692] ACPI: EC: EC started [ 0.274694] ACPI: EC: interrupt blocked [ 0.278283] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.278286] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.278288] ACPI: Interpreter enabled [ 0.278335] ACPI: PM: (supports S0 S4 S5) [ 0.278337] ACPI: Using IOAPIC for interrupt routing [ 0.280155] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.280156] PCI: Ignoring E820 reservations for host bridge windows [ 0.280839] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.285040] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 0.303481] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource [ 0.303876] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource [ 0.305789] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.306124] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.306457] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.306792] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.307128] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.307464] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.307799] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.308134] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.308465] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.308799] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.309131] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.309462] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.309799] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.310131] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.310462] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.310798] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.311131] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.312503] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.312854] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.313642] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.331807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.331816] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.333616] PCI host bridge to bus 0000:00 [ 0.333618] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-7e] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000 [ 0.333757] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.333826] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.334231] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000 [ 0.334252] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.334506] pci 0000:00:04.0: reg 0x10: [mem 0xed120000-0xed127fff 64bit] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.334926] pci 0000:00:14.0: reg 0x10: [mem 0xed110000-0xed11ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.335803] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.335839] pci 0000:00:14.2: reg 0x10: [mem 0xed138000-0xed138fff 64bit] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000 [ 0.336357] pci 0000:00:15.0: reg 0x10: [mem 0xed137000-0xed137fff 64bit] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000 [ 0.337565] pci 0000:00:15.1: reg 0x10: [mem 0xed136000-0xed136fff 64bit] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.338516] pci 0000:00:16.0: reg 0x10: [mem 0xed135000-0xed135fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.339069] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.339118] pci 0000:00:17.0: reg 0x10: [mem 0xed130000-0xed131fff] pci 0000:00:17.0: reg 0x14: [mem 0xed134000-0xed1340ff] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:17.0: reg 0x24: [mem 0xed133000-0xed1337ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.339651] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.339789] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.340415] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400 [ 0.340556] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.341171] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.341304] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.341951] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400 [ 0.342074] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold [ 0.342669] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400 [ 0.342777] pci 0000:00:1d.6: broken device, retraining non-functional downstream link at 2.5GT/s [ 1.343632] pci 0000:00:1d.6: retraining failed [ 1.343703] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold [ 1.344327] pci 0000:00:1f.0: [8086:a154] type 00 class 0x060100 [ 1.344754] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 1.344782] pci 0000:00:1f.2: reg 0x10: [mem 0xed12c000-0xed12ffff] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040380 [ 1.345185] pci 0000:00:1f.3: reg 0x10: [mem 0xed128000-0xed12bfff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xed100000-0xed10ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 1.345999] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 1.346067] pci 0000:00:1f.4: reg 0x10: [mem 0xed132000-0xed1320ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] pci 0000:01:00.0: [10de:13b6] type 00 class 0x030200 [ 1.346537] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref] pci 0000:01:00.0: Enabling HDA controller [ 1.346960] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000 [ 1.347433] pci 0000:02:00.0: reg 0x10: [mem 0xed200000-0xed3fffff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.349114] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff] acpiphp: Slot [1] registered [ 1.349272] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000 [ 1.349318] pci 0000:03:00.0: reg 0x14: [mem 0xed400000-0xed400fff] pci 0000:03:00.0: supports D1 D2 [ 1.349499] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.349987] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.1: bridge window [mem 0xed400000-0xeddfffff] pci 0000:00:1c.1: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] pci 0000:04:00.0: [1179:0116] type 00 class 0x010802 [ 1.350166] pci 0000:04:00.0: reg 0x10: [mem 0xede00000-0xede03fff 64bit] pci 0000:00:1d.0: PCI bridge to [bus 04] pci 0000:00:1d.0: bridge window [mem 0xede00000-0xedefffff] acpiphp: Slot [1-1] registered [ 1.350949] pci 0000:00:1d.4: PCI bridge to [bus 05] pci 0000:00:1d.6: PCI bridge to [bus 06-3e] pci 0000:00:1d.6: bridge window [mem 0xd4000000-0xea0fffff] pci 0000:00:1d.6: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.354158] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.354210] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.354262] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.354313] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 1.354365] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 1.354416] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.354468] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.358253] ACPI: EC: interrupt unblocked [ 1.358255] ACPI: EC: event unblocked [ 1.358260] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 1.358262] ACPI: EC: GPE=0x14 [ 1.358263] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 1.358265] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 1.358367] iommu: Default domain type: Translated [ 1.358367] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.358729] SCSI subsystem initialized [ 1.358861] libata version 3.00 loaded. [ 1.359106] ACPI: bus type USB registered [ 1.359117] usbcore: registered new interface driver usbfs [ 1.359124] usbcore: registered new interface driver hub [ 1.359131] usbcore: registered new device driver usb [ 1.359162] pps_core: LinuxPPS API ver. 1 registered [ 1.359164] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 1.359167] PTP clock support registered [ 1.359180] EDAC MC: Ver: 3.0.0 [ 1.360335] NetLabel: Initializing [ 1.360537] NetLabel: domain hash size = 128 [ 1.360538] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.360557] NetLabel: unlabeled traffic allowed by default [ 1.360564] mctp: management component transport protocol core [ 1.360565] NET: Registered PF_MCTP protocol family [ 1.360569] PCI: Using ACPI for IRQ routing [ 1.370811] PCI: pci_cache_line_size set to 64 bytes [ 1.371022] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] e820: reserve RAM buffer [mem 0x65fd2000-0x67ffffff] e820: reserve RAM buffer [mem 0x87e800000-0x87fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.371043] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.371043] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.371043] vgaarb: loaded [ 1.371043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.371043] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 1.372657] clocksource: Switched to clocksource tsc-early [ 1.387002] VFS: Disk quotas dquot_6.6.0 [ 1.387013] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.387083] pnp: PnP ACPI init [ 1.387340] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.387343] system 00:00: [io 0xffff] has been reserved [ 1.387347] system 00:00: [io 0xffff] has been reserved [ 1.387349] system 00:00: [io 0xffff] has been reserved [ 1.387350] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.387352] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.387467] system 00:01: [io 0x0800-0x087f] has been reserved [ 1.387531] system 00:03: [io 0x1854-0x1857] has been reserved [ 1.387956] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.387959] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.387961] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.387963] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 1.387965] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.387967] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.387969] system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 1.387971] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 1.387973] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.387975] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved [ 1.388026] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 1.388028] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 1.388030] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 1.388032] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 1.388034] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 1.388036] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 1.388038] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 1.388381] system 00:08: [io 0xff00-0xfffe] has been reserved [ 1.389685] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 1.389688] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 1.389690] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 1.393079] pnp: PnP ACPI: found 11 devices [ 1.398929] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.398999] NET: Registered PF_INET protocol family [ 1.399195] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.402230] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.402261] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.402279] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.402476] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.402769] TCP: Hash tables configured (established 262144 bind 65536) [ 1.402878] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 1.402938] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.402991] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.403079] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.403086] NET: Registered PF_XDP protocol family [ 1.403094] pci 0000:00:1d.6: bridge window [io 0x1000-0x0fff] to [bus 06-3e] add_size 1000 [ 1.403102] pci 0000:00:1d.6: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.1: bridge window [mem 0xed400000-0xeddfffff] pci 0000:00:1c.1: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] pci 0000:00:1d.0: PCI bridge to [bus 04] pci 0000:00:1d.0: bridge window [mem 0xede00000-0xedefffff] pci 0000:00:1d.4: PCI bridge to [bus 05] pci 0000:00:1d.6: PCI bridge to [bus 06-3e] pci 0000:00:1d.6: bridge window [io 0x2000-0x2fff] pci 0000:00:1d.6: bridge window [mem 0xd4000000-0xea0fffff] pci 0000:00:1d.6: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:02: resource 1 [mem 0xed200000-0xed3fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xed400000-0xeddfffff] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref] pci_bus 0000:04: resource 1 [mem 0xede00000-0xedefffff] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xea0fffff] pci_bus 0000:06: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] PCI: CLS 0 bytes, default 64 [ 1.404744] DMAR: ACPI device "device:78" under DMAR at fed91000 as 00:15.0 [ 1.404748] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.1 [ 1.404759] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.404760] software IO TLB: mapped [mem 0x0000000061fd2000-0x0000000065fd2000] (64MB) [ 1.404779] Trying to unpack rootfs image as initramfs... [ 1.405942] Initialise system trusted keyrings [ 1.405951] Key type blacklist registered [ 1.405987] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.406004] zbud: loaded [ 1.406479] integrity: Platform Keyring initialized [ 1.406483] integrity: Machine keyring initialized [ 1.416254] NET: Registered PF_ALG protocol family [ 1.416259] xor: automatically using best checksumming function avx [ 1.416262] Key type asymmetric registered [ 1.416263] Asymmetric key parser 'x509' registered [ 1.925959] Freeing initrd memory: 40876K [ 1.931114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.931147] io scheduler mq-deadline registered [ 1.931148] io scheduler kyber registered [ 1.931160] io scheduler bfq registered [ 1.932842] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.933565] pcieport 0000:00:1c.0: AER: enabled with IRQ 123 [ 1.933859] pcieport 0000:00:1c.1: AER: enabled with IRQ 124 [ 1.934136] pcieport 0000:00:1d.0: AER: enabled with IRQ 125 [ 1.934635] pcieport 0000:00:1d.6: AER: enabled with IRQ 127 [ 1.934753] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.936230] ACPI: AC: AC Adapter [AC] (on-line) [ 1.936300] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.936369] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.936462] ACPI: button: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.936511] ACPI: button: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.936578] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.938834] ACPI: thermal: Thermal Zone [THM] (25 C) [ 1.939016] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.941635] Non-volatile memory driver v1.3 [ 1.941641] Linux agpgart interface v0.103 [ 1.948470] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 4) [ 1.962267] ACPI: bus type drm_connector registered [ 1.964133] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.988363] ACPI: battery: Slot [BAT0] (battery present) [ 1.995078] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 2.005233] ahci 0000:00:17.0: version 3.0 [ 2.005443] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 2.005467] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode [ 2.005471] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst [ 2.006095] scsi host0: ahci [ 2.006449] scsi host1: ahci [ 2.006496] ata1: DUMMY [ 2.006501] ata2: SATA max UDMA/133 abar m2048@0xed133000 port 0xed133180 irq 128 [ 2.006947] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.006995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.008121] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 2.008616] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.008673] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.008679] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.008720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.008723] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.008725] usb usb1: Product: xHCI Host Controller [ 2.008727] usb usb1: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd [ 2.008728] usb usb1: SerialNumber: ... [ 2.008989] hub 1-0:1.0: USB hub found [ 2.009026] hub 1-0:1.0: 16 ports detected [ 2.011081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 2.011085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.011087] usb usb2: Product: xHCI Host Controller [ 2.011089] usb usb2: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd [ 2.011090] usb usb2: SerialNumber: ... [ 2.011332] hub 2-0:1.0: USB hub found [ 2.011356] hub 2-0:1.0: 10 ports detected [ 2.011863] usb: port power management may be unreliable [ 2.012710] usbcore: registered new interface driver usbserial_generic [ 2.012716] usbserial: USB Serial support registered for generic [ 2.012764] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.013123] i8042: Warning: Keylock active [ 2.015533] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.015537] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.015723] mousedev: PS/2 mouse device common for all mice [ 2.016041] rtc_cmos 00:02: RTC can wake from S4 [ 2.016863] rtc_cmos 00:02: registered as rtc0 [ 2.017004] rtc_cmos 00:02: setting system clock to 2024-03-10T18:29:26 UTC (1710095366) [ 2.017034] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 2.017387] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 2.017393] device-mapper: uevent: version 1.0.3 [ 2.017490] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 2.017528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.017536] intel_pstate: Intel P-state driver initializing [ 2.017992] intel_pstate: HWP enabled [ 2.018348] hid: raw HID events driver (C) Jiri Kosina [ 2.018370] usbcore: registered new interface driver usbhid [ 2.018371] usbhid: USB HID core driver [ 2.018400] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] caller get_primary_reg_base+0x4f/0xb0 mapping multiple BARs [ 2.018419] intel_pmc_core INT33A1:00: initialized [ 2.018547] drop_monitor: Initializing network drop monitor service [ 2.032848] Initializing XFRM netlink socket [ 2.032872] NET: Registered PF_INET6 protocol family [ 2.038022] Segment Routing with IPv6 [ 2.038023] RPL Segment Routing with IPv6 [ 2.038031] In-situ OAM (IOAM) with IPv6 [ 2.038053] mip6: Mobile IPv6 [ 2.038056] NET: Registered PF_PACKET protocol family [ 2.039301] microcode: Microcode Update Driver: v2.2. [ 2.039306] IPI shorthand broadcast: enabled [ 2.039315] AVX2 version of gcm_enc/dec engaged. [ 2.039428] AES CTR mode by8 optimization enabled [ 2.041356] sched_clock: Marking stable (2034000945, 6622275)->(2172528554, -131905334) [ 2.041552] registered taskstats version 1 [ 2.041843] Loading compiled-in X.509 certificates [ 2.050832] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413' [ 2.053432] page_owner is disabled [ 2.053614] Key type .fscrypt registered [ 2.053615] Key type fscrypt-provisioning registered [ 2.054023] Btrfs loaded, zoned=yes, fsverity=yes [ 2.054036] Key type big_key registered [ 2.054223] Key type trusted registered [ 2.058604] Key type encrypted registered [ 2.058615] Loading compiled-in module X.509 certificates [ 2.059150] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413' [ 2.059153] ima: Allocated hash algorithm: sha256 [ 2.080900] ima: No architecture policies found [ 2.080915] evm: Initialising EVM extended attributes: [ 2.080915] evm: security.selinux [ 2.080917] evm: security.SMACK64 (disabled) [ 2.080918] evm: security.SMACK64EXEC (disabled) [ 2.080919] evm: security.SMACK64TRANSMUTE (disabled) [ 2.080920] evm: security.SMACK64MMAP (disabled) [ 2.080920] evm: security.apparmor (disabled) [ 2.080921] evm: security.ima [ 2.080922] evm: security.capability [ 2.080923] evm: HMAC attrs: 0x1 [ 2.229957] alg: No test for 842 (842-scomp) [ 2.229991] alg: No test for 842 (842-generic) [ 2.246674] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 2.315281] ata2: SATA link down (SStatus 4 SControl 300) [ 2.334930] PM: Magic number: 0:568:493 [ 2.339294] RAS: Correctable Errors collector initialized. [ 2.339344] clk: Disabling unused clocks [ 2.340856] Freeing unused decrypted memory: 2036K [ 2.341440] Freeing unused kernel image (initmem) memory: 4508K [ 2.348849] Write protecting the kernel read-only data: 34816k [ 2.349439] Freeing unused kernel image (rodata/data gap) memory: 1948K [ 2.393928] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.393930] x86/mm: Checking user space page tables [ 2.408130] usb 1-2: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00 [ 2.408133] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.408135] usb 1-2: Product: USB Receiver [ 2.408136] usb 1-2: Manufacturer: Logitech [ 2.411111] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0001/input/input7 [ 2.411489] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.412817] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/input/input8 [ 2.438492] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.438504] tsc: Refined TSC clocksource calibration: 2711.999 MHz [ 2.438507] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x271785701be, max_idle_ns: 440795203568 ns [ 2.438566] clocksource: Switched to clocksource tsc [ 2.438573] Run /init as init process [ 2.438575] with arguments: [ 2.438576] /init [ 2.438577] rhgb [ 2.438578] with environment: [ 2.438579] HOME=/ [ 2.438580] TERM=linux [ 2.438580] BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64 [ 2.465005] hid-generic 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.578675] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 2.654798] fuse: init (API version 7.38) [ 2.707961] usb 1-4: New USB device found, idVendor=0cf3, idProduct=e007, bcdDevice= 0.01 [ 2.707966] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.824693] usb 1-12: new high-speed USB device number 4 using xhci_hcd [ 2.846277] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4646] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..] psmouse serio1: synaptics: Your touchpad (PNP: DLL07bf PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 2.933573] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3125, fw id: 2378871 [ 2.969742] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.986447] usb 1-12: New USB device found, idVendor=0c45, idProduct=6713, bcdDevice=56.05 [ 2.986459] usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 2.986466] usb 1-12: Product: Integrated_Webcam_HD [ 2.986470] usb 1-12: Manufacturer: CN045G28LOG0082BB55MA01 [ 3.441267] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found [ 3.446025] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 3.521149] logitech-djreceiver 0003:046D:C52F.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 3.573377] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1 [ 3.573737] input: Logitech Wireless Mouse PID:4094 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/0003:046D:4094.0003/input/input11 [ 3.573838] input: Logitech Wireless Mouse PID:4094 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/0003:046D:4094.0003/input/input12 [ 3.573886] hid-generic 0003:046D:4094.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4094] on usb-0000:00:14.0-2/input1:1 [ 3.617143] input: DLL07BF:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BF:01/0018:06CB:7A13.0004/input/input16 [ 3.617323] input: DLL07BF:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BF:01/0018:06CB:7A13.0004/input/input17 [ 3.617528] hid-generic 0018:06CB:7A13.0004: input,hidraw3: I2C HID v1.00 Mouse [DLL07BF:01 06CB:7A13] on i2c-DLL07BF:01 [ 3.648710] nvme nvme0: pci function 0000:04:00.0 [ 3.657028] nvme nvme0: 8/0/0 default/read/poll queues [ 3.659250] nvme0n1: p1 p2 p3 [ 3.676236] BTRFS: device label ... devid 1 transid 25 /dev/nvme0n1p3 scanned by (udev-worker) (406) [ 3.700943] input: DLL07BF:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BF:01/0018:06CB:7A13.0004/input/input19 [ 3.712849] input: DLL07BF:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BF:01/0018:06CB:7A13.0004/input/input20 [ 3.713070] hid-multitouch 0018:06CB:7A13.0004: input,hidraw2: I2C HID v1.00 Mouse [DLL07BF:01 06CB:7A13] on i2c-DLL07BF:01 [ 3.719524] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/0003:046D:4094.0003/input/input22 [ 3.719642] logitech-hidpp-device 0003:046D:4094.0003: input,hidraw3: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-2/input1:1 [ 4.084254] MXM: GUID detected in BIOS [ 4.084317] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230331/nsarguments-61) [ 4.084547] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, [ 4.084550] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 4.084551] nouveau: detected PR support, will not use DSM [ 4.084763] nouveau 0000:01:00.0: NVIDIA GM107 (117360a2) [ 4.105510] nouveau 0000:01:00.0: bios: version 82.07.bb.00.12 [ 4.210468] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5 [ 4.210482] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ PRIVRING ] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB [ 4.276031] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 4.276051] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found [ 4.276053] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 4.277200] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 4.277448] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 4.277525] nouveau 0000:01:00.0: [drm] No compatible format found [ 4.277527] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes [ 4.277528] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug [ 4.508072] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.508896] Console: switching to colour dummy device 80x25 [ 4.511476] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.512532] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 4.548243] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 4.548249] i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 4.563711] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 4.566309] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.567107] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input23 [ 4.567173] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 4.567216] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input24 [ 4.567386] vga_switcheroo: enabled [ 4.577672] fbcon: i915drmfb (fb0) is primary device [ 5.721809] Console: switching to colour frame buffer device 240x67 [ 5.741270] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.848859] BTRFS info (device nvme0n1p3): using crc32c (crc32c-intel) checksum algorithm [ 5.848868] BTRFS info (device nvme0n1p3): using free space tree [ 5.852358] BTRFS info (device nvme0n1p3): enabling ssd optimizations [ 5.852361] BTRFS info (device nvme0n1p3): auto enabling async discard [ 6.770120] SELinux: policy capability network_peer_controls=1 [ 6.770123] SELinux: policy capability open_perms=1 [ 6.770124] SELinux: policy capability extended_socket_class=1 [ 6.770125] SELinux: policy capability always_check_network=0 [ 6.770125] SELinux: policy capability cgroup_seclabel=1 [ 6.770126] SELinux: policy capability nnp_nosuid_transition=1 [ 6.770127] SELinux: policy capability genfs_seclabel_symlinks=1 [ 6.770128] SELinux: policy capability ioctl_skip_cloexec=0 [ 7.317614] zram: Added device: zram0 [ 7.591855] loop: module loaded [ 7.639047] BTRFS info (device nvme0n1p3: state M): use zstd compression, level 1 [ 8.020599] zram0: detected capacity change from 0 to 16777216 [ 8.126715] input: Intel HID events as /devices/platform/INT33D5:00/input/input25 [ 8.126957] intel-hid INT33D5:00: platform supports 5 button array [ 8.127935] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input26 [ 8.133404] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20230331/nsprepkg-94) [ 8.135522] Consider using thermal netlink events interface [ 8.143037] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 8.175888] EXT4-fs (nvme0n1p2): mounted filesystem HASH_BA0-57FE-8CBD-87C9-DD226D138A1E r/w with ordered data mode. Quota mode: none. [ 8.278204] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 8.291995] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 8.301686] mc: Linux media interface: v0.10 [ 8.307126] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 8.308989] intel_rapl_common: Found RAPL domain package [ 8.308992] intel_rapl_common: Found RAPL domain dram [ 8.357262] input: PC Speaker as /devices/platform/pcspkr/input/input27 [ 8.357573] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 8.357602] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 8.357684] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 [ 8.357752] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] videodev: Linux video capture interface: v2.00 [ 8.392553] i2c i2c-20: 2/2 memory slots populated (from DMI) [ 8.400939] i2c i2c-20: Successfully instantiated SPD at 0x50 [ 8.469227] Bluetooth: Core ver 2.22 [ 8.470639] NET: Registered PF_BLUETOOTH protocol family [ 8.470642] Bluetooth: HCI device and connection manager initialized [ 8.470647] Bluetooth: HCI socket layer initialized [ 8.470649] Bluetooth: L2CAP socket layer initialized [ 8.470657] Bluetooth: SCO socket layer initialized [ 8.516187] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.516845] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.548305] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 8.548310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.548312] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.548313] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.548315] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.549933] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input28 [ 8.550612] usbcore: registered new interface driver btusb [ 8.557446] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 8.557451] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 8.676163] usb 1-12: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713) [ 8.722113] usbcore: registered new interface driver uvcvideo [ 8.746257] iTCO_vendor_support: vendor-support=0 [ 8.762950] intel_rapl_common: Found RAPL domain package [ 8.762953] intel_rapl_common: Found RAPL domain core [ 8.762955] intel_rapl_common: Found RAPL domain uncore [ 8.762957] intel_rapl_common: Found RAPL domain dram [ 8.878818] ee1004 20-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 8.899111] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 8.913279] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 8.915414] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.919634] RPC: Registered named UNIX socket transport module. [ 8.919637] RPC: Registered udp transport module. [ 8.919639] RPC: Registered tcp transport module. [ 8.919640] RPC: Registered tcp-with-tls transport module. [ 8.919641] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.938649] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 8.962224] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 8.973637] dell_laptop: Using i8042 filter function for receiving events [ 9.014826] intel_tcc_cooling: Programmable TCC Offset detected [ 9.040649] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.040845] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.095100] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 9.095108] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.095110] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 9.095112] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.095113] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.095115] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18 [ 9.095117] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 9.095118] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 9.160451] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 9.160541] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 9.160602] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 9.160673] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32 [ 9.220684] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310 [ 9.220689] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0 [ 9.221150] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c [ 9.293245] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 9.318568] dbus-broker-lau[902]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 9.386615] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 9.439171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.439177] Bluetooth: BNEP filters: protocol multicast [ 9.439181] Bluetooth: BNEP socket layer initialized [ 9.442321] Bluetooth: MGMT ver 1.22 [ 9.446861] ath: EEPROM regdomain: 0x6c [ 9.446866] ath: EEPROM indicates we should expect a direct regpair map [ 9.446868] ath: Country alpha2 being used: 00 [ 9.446870] ath: Regpair used: 0x6c [ 9.459654] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.666152] NET: Registered PF_QIPCRTR protocol family [ 15.476895] ath10k_pci 0000:02:00.0: wmi service ready event not received [ 15.535082] ath10k_pci 0000:02:00.0: Could not init core: -110 [ 22.645287] nouveau 0000:01:00.0: Enabling HDA controller [ 22.917371] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 619444 [ PRIVRING ] rfkill: input handler disabled [ 24.509280] Bluetooth: RFCOMM TTY layer initialized [ 24.509291] Bluetooth: RFCOMM socket layer initialized [ 24.509298] Bluetooth: RFCOMM ver 1.11 [ 28.785457] logitech-hidpp-device 0003:046D:4094.0003: HID++ 4.5 device connected. [ 57.389867] wlp2s0: authenticate with 9157416DA154F54EF4B63ECAAE272ECC [ 57.442169] wlp2s0: send auth to 9157416DA154F54EF4B63ECAAE272ECC (try 1/3) [ 57.445337] wlp2s0: authenticated [ 57.446673] wlp2s0: associate with 9157416DA154F54EF4B63ECAAE272ECC (try 1/3) [ 57.450055] wlp2s0: RX AssocResp from 9157416DA154F54EF4B63ECAAE272ECC (capab=0x1111 status=0 aid=1) [ 57.453562] wlp2s0: associated [ 57.453876] ath: EEPROM regdomain: 0x8348 [ 57.453885] ath: EEPROM indicates we should expect a country code [ 57.453892] ath: doing EEPROM country->regdmn map search [ 57.453897] ath: country maps to regdmn code: 0x3a [ 57.453902] ath: Country alpha2 being used: US [ 57.453908] ath: Regpair used: 0x3a [ 57.453913] ath: regdomain 0x8348 dynamically updated by country element [ 57.462166] ------------[ cut here ]------------ [ 57.462176] WARNING: CPU: 7 PID: 1729 at drivers/net/wireless/ath/ath10k/htt_rx.c:38 ath10k_htt_rx_pop_paddr+0x3f/0xc0 [ath10k_core] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep snd_hda_codec_hdmi snd_soc_avs snd_soc_hda_codec snd_ctl_led snd_hda_ext_core snd_hda_codec_realtek snd_soc_core snd_hda_codec_generic snd_compress ac97_bus snd_pcm_dmaengine snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_core dell_rbtn kvm_intel ath10k_pci iTCO_wdt dell_laptop intel_pmc_bxt sunrpc ath10k_core binfmt_misc ee1004 mei_pxp snd_hwdep mei_hdcp mei_wdt iTCO_vendor_support intel_rapl_msr dell_smm_hwmon kvm mac80211 snd_seq uvcvideo irqbypass snd_seq_device dell_wmi uvc btusb rapl libarc4 snd_pcm btrtl videobuf2_vmalloc intel_cstate ath btbcm videobuf2_memops dell_smbios btintel dcdbas btmtk [ 57.462580] videobuf2_v4l2 intel_uncore cfg80211 videobuf2_common snd_timer bluetooth intel_wmi_thunderbolt ledtrig_audio wmi_bmof dell_wmi_descriptor i2c_i801 snd pcspkr videodev soundcore i2c_smbus mei_me rfkill mc processor_thermal_device_pci_legacy processor_thermal_device mei processor_thermal_rfim processor_thermal_mbox processor_thermal_rapl idma64 intel_rapl_common intel_pch_thermal intel_soc_dts_iosf acpi_pad int3400_thermal int3403_thermal intel_hid int340x_thermal_zone acpi_thermal_rel sparse_keymap joydev loop zram i915 nouveau nvme rtsx_pci_sdmmc hid_logitech_hidpp mmc_core nvme_core drm_ttm_helper crct10dif_pclmul drm_buddy crc32_pclmul i2c_algo_bit crc32c_intel ttm hid_multitouch polyval_clmulni polyval_generic mxm_wmi ghash_clmulni_intel sha512_ssse3 drm_display_helper rtsx_pci nvme_common cec i2c_hid_acpi i2c_hid video wmi hid_logitech_dj serio_raw ip6_tables ip_tables fuse [ 57.462847] CPU: 7 PID: 1729 Comm: gnome-initial-s Not tainted 6.5.6-300.fc39.x86_64 #1 [ 57.462862] Hardware name: Dell Inc. Precision 5520/080VVT, BIOS 1.36.0 12/18/2023 [ 57.462869] RIP: 0010:ath10k_htt_rx_pop_paddr+0x3f/0xc0 [ath10k_core] Code: af c6 48 c1 e8 3c 48 8b 84 c1 f0 0c 00 00 48 85 c0 74 17 48 83 e8 08 48 85 c0 74 0e 48 3b 30 74 16 48 8b 40 08 48 85 c0 75 e9 <0f> 0b 31 db 48 89 d8 5b c3 cc cc cc cc 48 89 c3 48 83 eb 28 74 ee [ 57.463012] RSP: 0000:ffffaac982d17cb0 EFLAGS: 00010246 [ 57.463024] RAX: 0000000000000000 RBX: ffffaac982d17d70 RCX: ffff9b6cc64d20a0 [ 57.463032] RDX: 0000000000000001 RSI: 00000000659e8000 RDI: ffff9b6cc64d2d18 [ 57.463040] RBP: ffffaac982d17de0 R08: 0000000000000000 R09: 000000000003c770 [ 57.463047] R10: ffffaac982d17e00 R11: 0000000000000000 R12: ffff9b6cc64d20a0 [ 57.463054] R13: ffff9b6cdd0f3dd0 R14: ffffaac982d17d90 R15: ffff9b6cdd0f3dc8 [ 57.463062] FS: 00007f454b3a3640(0000) GS:ffff9b741ebc0000(0000) knlGS:0000000000000000 [ 57.463072] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.463080] CR2: 00007fd8e28d0658 CR3: 0000000139b1a005 CR4: 00000000003706e0 [ 57.463088] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.463095] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.463102] Call Trace: [ 57.463110] <TASK> [ 57.463116] ? ath10k_htt_rx_pop_paddr+0x3f/0xc0 [ath10k_core] ? __warn+0x81/0x130 [ 57.463253] ? ath10k_htt_rx_pop_paddr+0x3f/0xc0 [ath10k_core] ? report_bug+0x171/0x1a0 [ 57.463394] ? handle_bug+0x3c/0x80 [ 57.463408] ? exc_invalid_op+0x17/0x70 [ 57.463423] ? asm_exc_invalid_op+0x1a/0x20 [ 57.463444] ? ath10k_htt_rx_pop_paddr+0x3f/0xc0 [ath10k_core] ath10k_htt_txrx_compl_task+0x670/0x15c0 [ath10k_core] ? ath10k_htc_process_trailer+0x220/0x2c0 [ath10k_core] ? ath10k_pci_process_rx_cb+0x116/0x1b0 [ath10k_pci] ? ath10k_pci_napi_poll+0x55/0x130 [ath10k_pci] ath10k_pci_napi_poll+0x55/0x130 [ath10k_pci] __napi_poll+0x28/0x1b0 [ 57.463940] net_rx_action+0x2a4/0x380 [ 57.463959] __do_softirq+0xd1/0x2c8 [ 57.463977] __irq_exit_rcu+0xa6/0xc0 [ 57.463993] common_interrupt+0x48/0xa0 [ 57.464004] asm_common_interrupt+0x26/0x40 [ 57.464018] RIP: 0033:0x7f4558055319 [ 57.464074] Code: 8b 95 48 ff ff ff 48 8b 85 50 ff ff ff 59 5e 48 39 c2 73 09 49 39 c6 0f 83 08 07 00 00 4c 8b 6d 98 48 8b 45 a0 66 0f 6f 7d 90 <66> 0f 6f 65 a0 66 49 0f 6e f5 66 48 0f 6e c0 66 0f 6f 6d b0 f3 0f [ 57.464084] RSP: 002b:00007ffe3e6152d0 EFLAGS: 00000206 [ 57.464096] RAX: 0000000000000009 RBX: 00005617d02604a0 RCX: 00007ffe3e615338 [ 57.464103] RDX: 0000000000000000 RSI: 00007f45580552ca RDI: 00007ffe3e615270 [ 57.464110] RBP: 00007ffe3e6153e0 R08: 00007f4520004060 R09: 0000000000000001 [ 57.464117] R10: 0000000000000010 R11: 4dbd74fc6ebe96d0 R12: 00007ffe3e615420 [ 57.464125] R13: 00007f4520140038 R14: 0000000000000017 R15: 0000000000000001 [ 57.464143] </TASK> [ 57.464148] ---[ end trace 0000000000000000 ]--- [ 57.464160] ath10k_pci 0000:02:00.0: failed to pop paddr list: -2 [ 57.477598] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 9157416DA154F54EF4B63ECAAE272ECC [ 61.495289] wlp2s0: deauthenticated from 9157416DA154F54EF4B63ECAAE272ECC (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 61.894815] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 61.943297] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 61.944498] wlp2s0: authenticated [ 61.960676] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 61.961995] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=8) [ 61.965474] wlp2s0: associated [ 61.965803] ath: EEPROM regdomain: 0x8348 [ 61.965812] ath: EEPROM indicates we should expect a country code [ 61.965819] ath: doing EEPROM country->regdmn map search [ 61.965824] ath: country maps to regdmn code: 0x3a [ 61.965829] ath: Country alpha2 being used: US [ 61.965834] ath: Regpair used: 0x3a [ 61.965838] ath: regdomain 0x8348 dynamically updated by country element [ 62.012278] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 65.085589] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 65.326109] wlp2s0: authenticate with 155606AC90D2662E990A5A17DF010877 [ 65.326154] wlp2s0: 80 MHz not supported, disabling VHT [ 65.378084] wlp2s0: send auth to 155606AC90D2662E990A5A17DF010877 (try 1/3) [ 65.378967] wlp2s0: authenticated [ 65.379665] wlp2s0: associate with 155606AC90D2662E990A5A17DF010877 (try 1/3) [ 65.380893] wlp2s0: RX AssocResp from 155606AC90D2662E990A5A17DF010877 (capab=0x1411 status=0 aid=17) [ 65.384736] wlp2s0: associated [ 65.384869] ath: EEPROM regdomain: 0x8348 [ 65.384871] ath: EEPROM indicates we should expect a country code [ 65.384873] ath: doing EEPROM country->regdmn map search [ 65.384874] ath: country maps to regdmn code: 0x3a [ 65.384876] ath: Country alpha2 being used: US [ 65.384877] ath: Regpair used: 0x3a [ 65.384879] ath: regdomain 0x8348 dynamically updated by country element [ 65.450669] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 155606AC90D2662E990A5A17DF010877 [ 68.525339] wlp2s0: deauthenticated from 155606AC90D2662E990A5A17DF010877 (Reason: 2=PREV_AUTH_NOT_VALID) [ 68.716025] wlp2s0: authenticate with 259E78D518E835BC8247F8D5BA970C51 [ 68.716062] wlp2s0: 80 MHz not supported, disabling VHT [ 68.764164] wlp2s0: send auth to 259E78D518E835BC8247F8D5BA970C51 (try 1/3) [ 68.769107] wlp2s0: authenticated [ 68.777676] wlp2s0: associate with 259E78D518E835BC8247F8D5BA970C51 (try 1/3) [ 68.782870] wlp2s0: RX AssocResp from 259E78D518E835BC8247F8D5BA970C51 (capab=0x1431 status=0 aid=1) [ 68.786425] wlp2s0: associated [ 68.786799] ath: EEPROM regdomain: 0x8348 [ 68.786807] ath: EEPROM indicates we should expect a country code [ 68.786812] ath: doing EEPROM country->regdmn map search [ 68.786815] ath: country maps to regdmn code: 0x3a [ 68.786819] ath: Country alpha2 being used: US [ 68.786822] ath: Regpair used: 0x3a [ 68.786826] ath: regdomain 0x8348 dynamically updated by country element [ 68.882094] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 259E78D518E835BC8247F8D5BA970C51 [ 72.827745] wlp2s0: deauthenticated from 259E78D518E835BC8247F8D5BA970C51 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 102.143029] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 102.191015] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 102.191840] wlp2s0: authenticated [ 102.201763] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 102.203055] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=20) [ 102.206385] wlp2s0: associated [ 102.206761] ath: EEPROM regdomain: 0x8348 [ 102.206769] ath: EEPROM indicates we should expect a country code [ 102.206775] ath: doing EEPROM country->regdmn map search [ 102.206779] ath: country maps to regdmn code: 0x3a [ 102.206784] ath: Country alpha2 being used: US [ 102.206788] ath: Regpair used: 0x3a [ 102.206792] ath: regdomain 0x8348 dynamically updated by country element [ 102.257050] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 105.323214] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 120.276348] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 120.324210] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 120.325050] wlp2s0: authenticated [ 120.333857] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 120.335093] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=21) [ 120.337850] wlp2s0: associated [ 120.337992] ath: EEPROM regdomain: 0x8348 [ 120.337995] ath: EEPROM indicates we should expect a country code [ 120.337997] ath: doing EEPROM country->regdmn map search [ 120.337998] ath: country maps to regdmn code: 0x3a [ 120.338000] ath: Country alpha2 being used: US [ 120.338001] ath: Regpair used: 0x3a [ 120.338003] ath: regdomain 0x8348 dynamically updated by country element [ 120.382269] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 123.011049] wlp2s0: deauthenticating from A2DD00D0B88051C582B0324885F2E7EB by local choice (Reason: 3=DEAUTH_LEAVING) [ 135.845449] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 135.893561] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 135.894471] wlp2s0: authenticated [ 135.904642] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 135.905859] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=12) [ 135.908733] wlp2s0: associated [ 135.908869] ath: EEPROM regdomain: 0x8348 [ 135.908872] ath: EEPROM indicates we should expect a country code [ 135.908874] ath: doing EEPROM country->regdmn map search [ 135.908875] ath: country maps to regdmn code: 0x3a [ 135.908877] ath: Country alpha2 being used: US [ 135.908878] ath: Regpair used: 0x3a [ 135.908880] ath: regdomain 0x8348 dynamically updated by country element [ 135.947548] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 139.025951] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 162.186542] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 162.233738] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 162.234849] wlp2s0: authenticated [ 162.235672] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 162.237713] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=17) [ 162.245132] wlp2s0: associated [ 162.245407] ath: EEPROM regdomain: 0x8348 [ 162.245416] ath: EEPROM indicates we should expect a country code [ 162.245423] ath: doing EEPROM country->regdmn map search [ 162.245428] ath: country maps to regdmn code: 0x3a [ 162.245433] ath: Country alpha2 being used: US [ 162.245485] ath: Regpair used: 0x3a [ 162.245491] ath: regdomain 0x8348 dynamically updated by country element [ 162.265007] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 165.353933] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 184.734785] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 184.782296] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 184.783140] wlp2s0: authenticated [ 184.783670] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 184.784919] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=11) [ 184.794625] wlp2s0: associated [ 184.796672] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 184.796840] ath: EEPROM regdomain: 0x8348 [ 184.796848] ath: EEPROM indicates we should expect a country code [ 184.796853] ath: doing EEPROM country->regdmn map search [ 184.796857] ath: country maps to regdmn code: 0x3a [ 184.796862] ath: Country alpha2 being used: US [ 184.796867] ath: Regpair used: 0x3a [ 184.796871] ath: regdomain 0x8348 dynamically updated by country element [ 187.901669] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 208.989256] wlp2s0: authenticate with 478EC6B516FDF654B803D922BD9D9331 [ 209.038853] wlp2s0: send auth to 478EC6B516FDF654B803D922BD9D9331 (try 1/3) [ 209.042475] wlp2s0: authenticated [ 209.043726] wlp2s0: associate with 478EC6B516FDF654B803D922BD9D9331 (try 1/3) [ 209.047593] wlp2s0: RX AssocResp from 478EC6B516FDF654B803D922BD9D9331 (capab=0x1011 status=0 aid=4) [ 209.050671] wlp2s0: associated [ 209.050852] ath: EEPROM regdomain: 0x8348 [ 209.050858] ath: EEPROM indicates we should expect a country code [ 209.050861] ath: doing EEPROM country->regdmn map search [ 209.050864] ath: country maps to regdmn code: 0x3a [ 209.050868] ath: Country alpha2 being used: US [ 209.050871] ath: Regpair used: 0x3a [ 209.050874] ath: regdomain 0x8348 dynamically updated by country element [ 209.078015] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 478EC6B516FDF654B803D922BD9D9331 [ 213.053928] wlp2s0: deauthenticated from 478EC6B516FDF654B803D922BD9D9331 (Reason: 2=PREV_AUTH_NOT_VALID) [ 232.694949] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 232.742352] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 232.743192] wlp2s0: authenticated [ 232.743816] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 232.745124] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=22) [ 232.748039] wlp2s0: associated [ 232.748163] ath: EEPROM regdomain: 0x8348 [ 232.748167] ath: EEPROM indicates we should expect a country code [ 232.748169] ath: doing EEPROM country->regdmn map search [ 232.748171] ath: country maps to regdmn code: 0x3a [ 232.748173] ath: Country alpha2 being used: US [ 232.748174] ath: Regpair used: 0x3a [ 232.748176] ath: regdomain 0x8348 dynamically updated by country element [ 232.821046] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 235.865321] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 249.823602] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 249.871263] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 249.872109] wlp2s0: authenticated [ 249.872657] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 249.873981] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=16) [ 249.876901] wlp2s0: associated [ 249.877038] ath: EEPROM regdomain: 0x8348 [ 249.877043] ath: EEPROM indicates we should expect a country code [ 249.877046] ath: doing EEPROM country->regdmn map search [ 249.877048] ath: country maps to regdmn code: 0x3a [ 249.877051] ath: Country alpha2 being used: US [ 249.877053] ath: Regpair used: 0x3a [ 249.877056] ath: regdomain 0x8348 dynamically updated by country element [ 249.922202] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 252.988993] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 302.852066] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 302.899049] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 302.899907] wlp2s0: authenticated [ 302.900681] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 302.901939] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=23) [ 302.905792] wlp2s0: associated [ 302.905939] ath: EEPROM regdomain: 0x8348 [ 302.905942] ath: EEPROM indicates we should expect a country code [ 302.905944] ath: doing EEPROM country->regdmn map search [ 302.905945] ath: country maps to regdmn code: 0x3a [ 302.905947] ath: Country alpha2 being used: US [ 302.905948] ath: Regpair used: 0x3a [ 302.905949] ath: regdomain 0x8348 dynamically updated by country element [ 302.966700] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 306.024333] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 320.973065] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 321.020138] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 321.021018] wlp2s0: authenticated [ 321.021681] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 321.022948] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=24) [ 321.026620] wlp2s0: associated [ 321.026755] ath: EEPROM regdomain: 0x8348 [ 321.026757] ath: EEPROM indicates we should expect a country code [ 321.026759] ath: doing EEPROM country->regdmn map search [ 321.026761] ath: country maps to regdmn code: 0x3a [ 321.026762] ath: Country alpha2 being used: US [ 321.026764] ath: Regpair used: 0x3a [ 321.026765] ath: regdomain 0x8348 dynamically updated by country element [ 321.091977] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 324.140400] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 332.817564] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 332.867054] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 332.868614] wlp2s0: authenticated [ 332.869729] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 332.871112] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=18) [ 332.874072] wlp2s0: associated [ 332.874195] ath: EEPROM regdomain: 0x8348 [ 332.874199] ath: EEPROM indicates we should expect a country code [ 332.874201] ath: doing EEPROM country->regdmn map search [ 332.874202] ath: country maps to regdmn code: 0x3a [ 332.874204] ath: Country alpha2 being used: US [ 332.874206] ath: Regpair used: 0x3a [ 332.874208] ath: regdomain 0x8348 dynamically updated by country element [ 332.970825] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 335.991569] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 350.942479] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 350.990485] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 350.991774] wlp2s0: authenticated [ 350.992687] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 350.995620] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=13) [ 350.998954] wlp2s0: associated [ 350.999197] ath: EEPROM regdomain: 0x8348 [ 350.999207] ath: EEPROM indicates we should expect a country code [ 350.999213] ath: doing EEPROM country->regdmn map search [ 350.999217] ath: country maps to regdmn code: 0x3a [ 350.999222] ath: Country alpha2 being used: US [ 350.999227] ath: Regpair used: 0x3a [ 350.999233] ath: regdomain 0x8348 dynamically updated by country element [ 351.096137] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 354.116987] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 362.646108] wlp2s0: authenticate with 478EC6B516FDF654B803D922BD9D9331 [ 362.693474] wlp2s0: send auth to 478EC6B516FDF654B803D922BD9D9331 (try 1/3) [ 362.697283] wlp2s0: authenticated [ 362.697682] wlp2s0: associate with 478EC6B516FDF654B803D922BD9D9331 (try 1/3) [ 362.703217] wlp2s0: RX AssocResp from 478EC6B516FDF654B803D922BD9D9331 (capab=0x1011 status=0 aid=4) [ 362.706850] wlp2s0: associated [ 362.707097] ath: EEPROM regdomain: 0x8348 [ 362.707106] ath: EEPROM indicates we should expect a country code [ 362.707111] ath: doing EEPROM country->regdmn map search [ 362.707117] ath: country maps to regdmn code: 0x3a [ 362.707121] ath: Country alpha2 being used: US [ 362.707126] ath: Regpair used: 0x3a [ 362.707130] ath: regdomain 0x8348 dynamically updated by country element [ 362.781710] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 478EC6B516FDF654B803D922BD9D9331 [ 366.711848] wlp2s0: deauthenticated from 478EC6B516FDF654B803D922BD9D9331 (Reason: 2=PREV_AUTH_NOT_VALID) [ 380.559312] rfkill: input handler enabled [ 380.655251] wlp2s0: authenticate with 3F65C4A8AE9D38868BFF40C588223F26 [ 380.702623] wlp2s0: send auth to 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 380.706884] wlp2s0: authenticated [ 380.713668] wlp2s0: associate with 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 380.727929] wlp2s0: RX AssocResp from 3F65C4A8AE9D38868BFF40C588223F26 (capab=0x1011 status=0 aid=1) [ 380.731172] wlp2s0: associated [ 380.731275] ath: EEPROM regdomain: 0x8348 [ 380.731278] ath: EEPROM indicates we should expect a country code [ 380.731279] ath: doing EEPROM country->regdmn map search [ 380.731281] ath: country maps to regdmn code: 0x3a [ 380.731282] ath: Country alpha2 being used: US [ 380.731283] ath: Regpair used: 0x3a [ 380.731284] ath: regdomain 0x8348 dynamically updated by country element [ 380.767628] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3F65C4A8AE9D38868BFF40C588223F26 [ 382.389057] nouveau 0000:01:00.0: Enabling HDA controller [ 382.559444] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 619444 [ PRIVRING ] rfkill: input handler disabled [ 384.736495] wlp2s0: deauthenticated from 3F65C4A8AE9D38868BFF40C588223F26 (Reason: 2=PREV_AUTH_NOT_VALID) [ 404.270541] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 404.317924] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 404.318804] wlp2s0: authenticated [ 404.330736] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 404.332087] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=10) [ 404.335471] wlp2s0: associated [ 404.335901] ath: EEPROM regdomain: 0x8348 [ 404.335911] ath: EEPROM indicates we should expect a country code [ 404.335917] ath: doing EEPROM country->regdmn map search [ 404.335922] ath: country maps to regdmn code: 0x3a [ 404.335927] ath: Country alpha2 being used: US [ 404.335932] ath: Regpair used: 0x3a [ 404.335937] ath: regdomain 0x8348 dynamically updated by country element [ 404.345634] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 407.451831] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 422.389964] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 422.437006] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 422.437985] wlp2s0: authenticated [ 422.441663] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 422.442872] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=19) [ 422.447149] wlp2s0: associated [ 422.447237] ath: EEPROM regdomain: 0x8348 [ 422.447240] ath: EEPROM indicates we should expect a country code [ 422.447242] ath: doing EEPROM country->regdmn map search [ 422.447243] ath: country maps to regdmn code: 0x3a [ 422.447245] ath: Country alpha2 being used: US [ 422.447247] ath: Regpair used: 0x3a [ 422.447248] ath: regdomain 0x8348 dynamically updated by country element [ 422.470539] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 425.009233] wlp2s0: deauthenticating from A2DD00D0B88051C582B0324885F2E7EB by local choice (Reason: 3=DEAUTH_LEAVING) [ 432.625416] wlp2s0: authenticate with 3F65C4A8AE9D38868BFF40C588223F26 [ 432.672787] wlp2s0: send auth to 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 432.675748] wlp2s0: authenticated [ 432.677732] wlp2s0: associate with 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 432.681436] wlp2s0: RX AssocResp from 3F65C4A8AE9D38868BFF40C588223F26 (capab=0x1011 status=0 aid=1) [ 432.684455] wlp2s0: associated [ 432.684597] ath: EEPROM regdomain: 0x8348 [ 432.684599] ath: EEPROM indicates we should expect a country code [ 432.684601] ath: doing EEPROM country->regdmn map search [ 432.684602] ath: country maps to regdmn code: 0x3a [ 432.684604] ath: Country alpha2 being used: US [ 432.684605] ath: Regpair used: 0x3a [ 432.684607] ath: regdomain 0x8348 dynamically updated by country element [ 432.684869] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3F65C4A8AE9D38868BFF40C588223F26 [ 436.689569] wlp2s0: deauthenticated from 3F65C4A8AE9D38868BFF40C588223F26 (Reason: 2=PREV_AUTH_NOT_VALID) [ 450.636790] wlp2s0: authenticate with 3F65C4A8AE9D38868BFF40C588223F26 [ 450.684358] wlp2s0: send auth to 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 450.687364] wlp2s0: authenticated [ 450.701694] wlp2s0: associate with 3F65C4A8AE9D38868BFF40C588223F26 (try 1/3) [ 450.705322] wlp2s0: RX AssocResp from 3F65C4A8AE9D38868BFF40C588223F26 (capab=0x1011 status=0 aid=1) [ 450.708905] wlp2s0: associated [ 450.708998] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3F65C4A8AE9D38868BFF40C588223F26 [ 450.709507] ath: EEPROM regdomain: 0x8348 [ 450.709516] ath: EEPROM indicates we should expect a country code [ 450.709522] ath: doing EEPROM country->regdmn map search [ 450.709527] ath: country maps to regdmn code: 0x3a [ 450.709532] ath: Country alpha2 being used: US [ 450.709537] ath: Regpair used: 0x3a [ 450.709541] ath: regdomain 0x8348 dynamically updated by country element [ 454.713538] wlp2s0: deauthenticated from 3F65C4A8AE9D38868BFF40C588223F26 (Reason: 2=PREV_AUTH_NOT_VALID) [ 515.924192] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 515.971649] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 515.972843] wlp2s0: authenticated [ 515.974689] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 515.975967] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=9) [ 515.979601] wlp2s0: associated [ 515.979865] ath: EEPROM regdomain: 0x8348 [ 515.979874] ath: EEPROM indicates we should expect a country code [ 515.979880] ath: doing EEPROM country->regdmn map search [ 515.979885] ath: country maps to regdmn code: 0x3a [ 515.979889] ath: Country alpha2 being used: US [ 515.979893] ath: Regpair used: 0x3a [ 515.979898] ath: regdomain 0x8348 dynamically updated by country element [ 516.067050] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 519.090466] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 534.035984] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 534.083378] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 534.084243] wlp2s0: authenticated [ 534.088666] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 534.092029] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=14) [ 534.094772] wlp2s0: associated [ 534.094862] ath: EEPROM regdomain: 0x8348 [ 534.094863] ath: EEPROM indicates we should expect a country code [ 534.094864] ath: doing EEPROM country->regdmn map search [ 534.094865] ath: country maps to regdmn code: 0x3a [ 534.094866] ath: Country alpha2 being used: US [ 534.094867] ath: Regpair used: 0x3a [ 534.094868] ath: regdomain 0x8348 dynamically updated by country element [ 534.191988] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 537.008965] wlp2s0: deauthenticating from A2DD00D0B88051C582B0324885F2E7EB by local choice (Reason: 3=DEAUTH_LEAVING) [ 556.278423] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 556.326009] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 556.328405] wlp2s0: authenticated [ 556.337702] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 556.338974] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=26) [ 556.343325] wlp2s0: associated [ 556.343548] ath: EEPROM regdomain: 0x8348 [ 556.343555] ath: EEPROM indicates we should expect a country code [ 556.343559] ath: doing EEPROM country->regdmn map search [ 556.343563] ath: country maps to regdmn code: 0x3a [ 556.343566] ath: Country alpha2 being used: US [ 556.343569] ath: Regpair used: 0x3a [ 556.343572] ath: regdomain 0x8348 dynamically updated by country element [ 556.414274] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 559.453483] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 574.404292] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 574.451805] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 574.453763] wlp2s0: authenticated [ 574.455670] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 574.456869] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=8) [ 574.460088] wlp2s0: associated [ 574.460233] ath: EEPROM regdomain: 0x8348 [ 574.460236] ath: EEPROM indicates we should expect a country code [ 574.460238] ath: doing EEPROM country->regdmn map search [ 574.460239] ath: country maps to regdmn code: 0x3a [ 574.460241] ath: Country alpha2 being used: US [ 574.460242] ath: Regpair used: 0x3a [ 574.460244] ath: regdomain 0x8348 dynamically updated by country element [ 574.539381] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 577.576946] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 601.697932] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 601.744706] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 601.745512] wlp2s0: authenticated [ 601.747820] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 601.749109] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=20) [ 601.751917] wlp2s0: associated [ 601.752020] ath: EEPROM regdomain: 0x8348 [ 601.752022] ath: EEPROM indicates we should expect a country code [ 601.752024] ath: doing EEPROM country->regdmn map search [ 601.752025] ath: country maps to regdmn code: 0x3a [ 601.752027] ath: Country alpha2 being used: US [ 601.752028] ath: Regpair used: 0x3a [ 601.752030] ath: regdomain 0x8348 dynamically updated by country element [ 601.778341] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 610.597402] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 620.377020] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 620.424120] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 620.425056] wlp2s0: authenticated [ 620.433703] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 620.434941] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=21) [ 620.442022] wlp2s0: associated [ 620.442330] ath: EEPROM regdomain: 0x8348 [ 620.442338] ath: EEPROM indicates we should expect a country code [ 620.442342] ath: doing EEPROM country->regdmn map search [ 620.442346] ath: country maps to regdmn code: 0x3a [ 620.442349] ath: Country alpha2 being used: US [ 620.442353] ath: Regpair used: 0x3a [ 620.442357] ath: regdomain 0x8348 dynamically updated by country element [ 620.518381] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 666.008428] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 670.626289] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 670.673511] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 670.674425] wlp2s0: authenticated [ 670.675817] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 670.677108] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=12) [ 670.680369] wlp2s0: associated [ 670.680480] ath: EEPROM regdomain: 0x8348 [ 670.680482] ath: EEPROM indicates we should expect a country code [ 670.680483] ath: doing EEPROM country->regdmn map search [ 670.680484] ath: country maps to regdmn code: 0x3a [ 670.680485] ath: Country alpha2 being used: US [ 670.680486] ath: Regpair used: 0x3a [ 670.680487] ath: regdomain 0x8348 dynamically updated by country element [ 670.695457] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 716.012039] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 720.631978] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 720.679444] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 720.680400] wlp2s0: authenticated [ 720.680678] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 720.681846] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=17) [ 720.685892] wlp2s0: associated [ 720.686017] ath: EEPROM regdomain: 0x8348 [ 720.686020] ath: EEPROM indicates we should expect a country code [ 720.686022] ath: doing EEPROM country->regdmn map search [ 720.686024] ath: country maps to regdmn code: 0x3a [ 720.686025] ath: Country alpha2 being used: US [ 720.686027] ath: Regpair used: 0x3a [ 720.686028] ath: regdomain 0x8348 dynamically updated by country element [ 720.770698] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 766.010944] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 770.650884] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 770.697756] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 770.698684] wlp2s0: authenticated [ 770.700785] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 770.702106] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=11) [ 770.705055] wlp2s0: associated [ 770.705183] ath: EEPROM regdomain: 0x8348 [ 770.705187] ath: EEPROM indicates we should expect a country code [ 770.705190] ath: doing EEPROM country->regdmn map search [ 770.705192] ath: country maps to regdmn code: 0x3a [ 770.705194] ath: Country alpha2 being used: US [ 770.705196] ath: Regpair used: 0x3a [ 770.705198] ath: regdomain 0x8348 dynamically updated by country element [ 770.743237] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 791.566007] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 803.785503] wlp2s0: authenticate with A2DD00D0B88051C582B0324885F2E7EB [ 803.832731] wlp2s0: send auth to A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 803.833582] wlp2s0: authenticated [ 803.844706] wlp2s0: associate with A2DD00D0B88051C582B0324885F2E7EB (try 1/3) [ 803.845992] wlp2s0: RX AssocResp from A2DD00D0B88051C582B0324885F2E7EB (capab=0x1011 status=0 aid=22) [ 803.849016] wlp2s0: associated [ 803.849366] ath: EEPROM regdomain: 0x8348 [ 803.849406] ath: EEPROM indicates we should expect a country code [ 803.849410] ath: doing EEPROM country->regdmn map search [ 803.849413] ath: country maps to regdmn code: 0x3a [ 803.849416] ath: Country alpha2 being used: US [ 803.849420] ath: Regpair used: 0x3a [ 803.849423] ath: regdomain 0x8348 dynamically updated by country element [ 803.922229] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by A2DD00D0B88051C582B0324885F2E7EB [ 806.965011] wlp2s0: deauthenticated from A2DD00D0B88051C582B0324885F2E7EB (Reason: 2=PREV_AUTH_NOT_VALID) [ 807.360576] wlp2s0: authenticate with 9157416DA154F54EF4B63ECAAE272ECC [ 807.409556] wlp2s0: send auth to 9157416DA154F54EF4B63ECAAE272ECC (try 1/3) [ 807.412644] wlp2s0: authenticated [ 807.416687] wlp2s0: associate with 9157416DA154F54EF4B63ECAAE272ECC (try 1/3) [ 807.419536] wlp2s0: RX AssocResp from 9157416DA154F54EF4B63ECAAE272ECC (capab=0x1111 status=0 aid=1) [ 807.422439] wlp2s0: associated [ 807.422607] ath: EEPROM regdomain: 0x8348 [ 807.422611] ath: EEPROM indicates we should expect a country code [ 807.422614] ath: doing EEPROM country->regdmn map search [ 807.422615] ath: country maps to regdmn code: 0x3a [ 807.422617] ath: Country alpha2 being used: US [ 807.422619] ath: Regpair used: 0x3a [ 807.422621] ath: regdomain 0x8348 dynamically updated by country element [ 807.454781] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 9157416DA154F54EF4B63ECAAE272ECC [ 811.466031] wlp2s0: deauthenticated from 9157416DA154F54EF4B63ECAAE272ECC (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 811.707299] wlp2s0: authenticate with 155606AC90D2662E990A5A17DF010877 [ 811.707328] wlp2s0: 80 MHz not supported, disabling VHT [ 811.760276] wlp2s0: send auth to 155606AC90D2662E990A5A17DF010877 (try 1/3) [ 811.761189] wlp2s0: authenticated [ 811.763706] wlp2s0: associate with 155606AC90D2662E990A5A17DF010877 (try 1/3) [ 811.765401] wlp2s0: RX AssocResp from 155606AC90D2662E990A5A17DF010877 (capab=0x1411 status=0 aid=18) [ 811.768582] wlp2s0: associated [ 811.768762] ath: EEPROM regdomain: 0x8348 [ 811.768765] ath: EEPROM indicates we should expect a country code [ 811.768767] ath: doing EEPROM country->regdmn map search [ 811.768768] ath: country maps to regdmn code: 0x3a [ 811.768770] ath: Country alpha2 being used: US [ 811.768771] ath: Regpair used: 0x3a [ 811.768773] ath: regdomain 0x8348 dynamically updated by country element [ 811.862828] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 155606AC90D2662E990A5A17DF010877 [ 814.887365] wlp2s0: deauthenticated from 155606AC90D2662E990A5A17DF010877 (Reason: 2=PREV_AUTH_NOT_VALID) [ 815.075205] wlp2s0: authenticate with 259E78D518E835BC8247F8D5BA970C51 [ 815.075234] wlp2s0: 80 MHz not supported, disabling VHT [ 815.123798] wlp2s0: send auth to 259E78D518E835BC8247F8D5BA970C51 (try 1/3) [ 815.127438] wlp2s0: authenticated [ 815.128705] wlp2s0: associate with 259E78D518E835BC8247F8D5BA970C51 (try 1/3) [ 815.143279] wlp2s0: RX AssocResp from 259E78D518E835BC8247F8D5BA970C51 (capab=0x1431 status=0 aid=1) [ 815.146307] wlp2s0: associated [ 815.146422] ath: EEPROM regdomain: 0x8348 [ 815.146424] ath: EEPROM indicates we should expect a country code [ 815.146426] ath: doing EEPROM country->regdmn map search [ 815.146427] ath: country maps to regdmn code: 0x3a [ 815.146428] ath: Country alpha2 being used: US [ 815.146429] ath: Regpair used: 0x3a [ 815.146430] ath: regdomain 0x8348 dynamically updated by country element [ 815.172277] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 259E78D518E835BC8247F8D5BA970C51 [ 819.193659] wlp2s0: deauthenticated from 259E78D518E835BC8247F8D5BA970C51 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 837.275683] wlp2s0: authenticate with 3171C9809C972938096026199744BFB8 [ 837.323206] wlp2s0: send auth to 3171C9809C972938096026199744BFB8 (try 1/3) [ 837.324060] wlp2s0: authenticated [ 837.324718] wlp2s0: associate with 3171C9809C972938096026199744BFB8 (try 1/3) [ 837.327338] wlp2s0: RX AssocResp from 3171C9809C972938096026199744BFB8 (capab=0x1001 status=0 aid=16) [ 837.330461] wlp2s0: associated [ 837.330841] ath: EEPROM regdomain: 0x8348 [ 837.330848] ath: EEPROM indicates we should expect a country code [ 837.330852] ath: doing EEPROM country->regdmn map search [ 837.330855] ath: country maps to regdmn code: 0x3a [ 837.330859] ath: Country alpha2 being used: US [ 837.330863] ath: Regpair used: 0x3a [ 837.330866] ath: regdomain 0x8348 dynamically updated by country element [ 837.407577] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3171C9809C972938096026199744BFB8 [ 847.288426] rfkill: input handler enabled [ 849.526111] nouveau 0000:01:00.0: Enabling HDA controller [ 850.037199] wlp2s0: deauthenticating from 3171C9809C972938096026199744BFB8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 850.768340] EXT4-fs (nvme0n1p2): unmounting filesystem HASH_BA0-57FE-8CBD-87C9-DD226D138A1E. [ 850.934959] zram0: detected capacity change from 16777216 to 0 [ 851.069606] watchdog: watchdog0: watchdog did not stop!