Probe #4f9ad96681 of ASUSTek X99-M WS Desktop Computer (All Series)

Log: dmesg.1

[ 0.000000] microcode: updated early: 0xb000036 -> 0xb000040, date = 2021-05-19 [ 0.000000] Linux version 6.3.10-200.fc38.x86_64 (XXX@XXX) (gcc (GCC) 13.1.1 20230614 (Red Hat 13.1.1-4), GNU ld version 2.39-9.fc38) #1 SMP PREEMPT_DYNAMIC Wed Jun 28 19:23:27 UTC 2023 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba200fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba201000-0x00000000bb1e3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bb1e4000-0x00000000bb254fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bb255000-0x00000000bd469fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd46a000-0x00000000bdd02fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdd03000-0x00000000bdd03fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdd04000-0x00000000bdd89fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdd8a000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000beffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000203fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa9ace018-0xa9ae7457] usable ==> usable [ 0.000000] e820: update [mem 0xa9ace018-0xa9ae7457] usable ==> usable [ 0.000000] e820: update [mem 0xa9ac3018-0xa9acda57] usable ==> usable [ 0.000000] e820: update [mem 0xa9ac3018-0xa9acda57] usable ==> usable [ 0.000000] e820: update [mem 0xa9ab1018-0xa9ac2057] usable ==> usable [ 0.000000] e820: update [mem 0xa9ab1018-0xa9ac2057] usable ==> usable [ 0.000000] e820: update [mem 0xa9aa0018-0xa9ab0c57] usable ==> usable [ 0.000000] e820: update [mem 0xa9aa0018-0xa9ab0c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a9aa0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9aa0018-0x00000000a9ab0c57] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ab0c58-0x00000000a9ab1017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ab1018-0x00000000a9ac2057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ac2058-0x00000000a9ac3017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ac3018-0x00000000a9acda57] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9acda58-0x00000000a9ace017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ace018-0x00000000a9ae7457] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ae7458-0x00000000ba200fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ba201000-0x00000000bb1e3fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bb1e4000-0x00000000bb254fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000bb255000-0x00000000bd469fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bd46a000-0x00000000bdd02fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bdd03000-0x00000000bdd03fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bdd04000-0x00000000bdd89fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bdd8a000-0x00000000bdffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000be000000-0x00000000beffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000203fffffff] usable [ 0.000000] efi: EFI v2.4 by American Megatrends [ 0.000000] efi: ESRT=0xbdb64f18 ACPI=0xbb1fa000 ACPI 2.0=0xbb1fa000 SMBIOS=0xbdb62000 SMBIOS 3.0=0xbdb61000 MOKvar=0xbd62b000 [ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem37: MMIO range=[0xfed1c000-0xfed44fff] (164KB) from e820 map [ 0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: ASUS All Series/X99-M WS, BIOS 4001 05/28/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2998.498 MHz processor [ 0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -10165753570810 force to 0 [ 0.000033] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000044] last_pfn = 0x2040000 max_arch_pfn = 0x400000000 [ 0.000049] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000317] last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.008019] esrt: Reserving ESRT space from 0x00000000bdb64f18 to 0x00000000bdb64f50. [ 0.008027] Using GB pages for direct mapping [ 0.008321] secureboot: Secure boot disabled [ 0.008322] RAMDISK: [mem 0xa9ae8000-0xace07fff] ACPI: Early table checksum verification disabled [ 0.008330] ACPI: RSDP 0x00000000BB1FA000 000024 (v02 ALASKA) [ 0.008334] ACPI: XSDT 0x00000000BB1FA098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008338] ACPI: FACP 0x00000000BB22EE08 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.008343] ACPI: DSDT 0x00000000BB1FA1E0 034C26 (v02 ALASKA A M I 01072009 INTL 20091013) [ 0.008346] ACPI: FACS 0x00000000BD468F80 000040 [ 0.008348] ACPI: APIC 0x00000000BB22EF18 000170 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.008351] ACPI: FPDT 0x00000000BB22F088 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008353] ACPI: FIDT 0x00000000BB22F0D0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008356] ACPI: MCFG 0x00000000BB22F170 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.008358] ACPI: ASF! 0x00000000BB2543B8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.008361] ACPI: SSDT 0x00000000BB22F208 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.008364] ACPI: UEFI 0x00000000BB22F578 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.008366] ACPI: HPET 0x00000000BB22F5C0 000038 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.008369] ACPI: MSCT 0x00000000BB22F5F8 000090 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.008371] ACPI: SLIT 0x00000000BB22F688 00002D (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.008374] ACPI: SRAT 0x00000000BB22F6B8 001158 (v03 ALASKA A M I 00000001 INTL 20091013) [ 0.008377] ACPI: WDDT 0x00000000BB230810 000040 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.008379] ACPI: SSDT 0x00000000BB230850 0151C1 (v02 ALASKA PmMgt 00000001 INTL 20120913) [ 0.008382] ACPI: VFCT 0x00000000BB245A18 00E884 (v01 ALASKA A M I 00000001 AMD 31504F47) [ 0.008384] ACPI: BGRT 0x00000000BB2542A0 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008387] ACPI: DMAR 0x00000000BB2542D8 0000DC (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.008389] ACPI: Reserving FACP table memory at [mem 0xbb22ee08-0xbb22ef13] ACPI: Reserving DSDT table memory at [mem 0xbb1fa1e0-0xbb22ee05] ACPI: Reserving FACS table memory at [mem 0xbd468f80-0xbd468fbf] ACPI: Reserving APIC table memory at [mem 0xbb22ef18-0xbb22f087] ACPI: Reserving FPDT table memory at [mem 0xbb22f088-0xbb22f0cb] ACPI: Reserving FIDT table memory at [mem 0xbb22f0d0-0xbb22f16b] ACPI: Reserving MCFG table memory at [mem 0xbb22f170-0xbb22f1ab] ACPI: Reserving ASF! table memory at [mem 0xbb2543b8-0xbb254457] ACPI: Reserving SSDT table memory at [mem 0xbb22f208-0xbb22f574] ACPI: Reserving UEFI table memory at [mem 0xbb22f578-0xbb22f5b9] ACPI: Reserving HPET table memory at [mem 0xbb22f5c0-0xbb22f5f7] ACPI: Reserving MSCT table memory at [mem 0xbb22f5f8-0xbb22f687] ACPI: Reserving SLIT table memory at [mem 0xbb22f688-0xbb22f6b4] ACPI: Reserving SRAT table memory at [mem 0xbb22f6b8-0xbb23080f] ACPI: Reserving WDDT table memory at [mem 0xbb230810-0xbb23084f] ACPI: Reserving SSDT table memory at [mem 0xbb230850-0xbb245a10] ACPI: Reserving VFCT table memory at [mem 0xbb245a18-0xbb25429b] ACPI: Reserving BGRT table memory at [mem 0xbb2542a0-0xbb2542d7] ACPI: Reserving DMAR table memory at [mem 0xbb2542d8-0xbb2543b3] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.008431] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.008432] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.008433] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.008433] SRAT: PXM 0 -> APIC 0x08 -> Node 0 [ 0.008434] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.008435] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.008435] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.008436] SRAT: PXM 0 -> APIC 0x16 -> Node 0 [ 0.008437] SRAT: PXM 0 -> APIC 0x18 -> Node 0 [ 0.008437] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.008438] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.008438] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.008439] SRAT: PXM 0 -> APIC 0x07 -> Node 0 [ 0.008440] SRAT: PXM 0 -> APIC 0x09 -> Node 0 [ 0.008440] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.008441] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.008442] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.008442] SRAT: PXM 0 -> APIC 0x17 -> Node 0 [ 0.008443] SRAT: PXM 0 -> APIC 0x19 -> Node 0 [ 0.008451] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x203fffffff] NUMA: Initialized distance table, cnt=1 [ 0.008460] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x203fffffff] -> [mem 0x00000000-0x203fffffff] NODE_DATA(0) allocated [mem 0x203ffd4000-0x203fffefff] Zone ranges: [ 0.226901] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000203fffffff] Device empty [ 0.226908] Movable zone start for each node [ 0.226910] Early memory node ranges [ 0.226911] node 0: [mem 0x0000000000001000-0x000000000003efff] node 0: [mem 0x0000000000040000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x00000000ba200fff] node 0: [mem 0x00000000bdd03000-0x00000000bdd03fff] node 0: [mem 0x00000000bdd8a000-0x00000000bdffffff] node 0: [mem 0x0000000100000000-0x000000203fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000203fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.226934] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.226961] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.232147] On node 0, zone DMA32: 15106 pages in unavailable ranges [ 0.232155] On node 0, zone DMA32: 134 pages in unavailable ranges [ 0.446696] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.446834] ACPI: PM-Timer IO Port: 0x408 [ 0.446844] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.446845] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.446846] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.446846] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.446847] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.446848] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.446848] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.446849] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.446850] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.446850] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.446851] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.446852] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.446852] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.446853] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.446854] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.446854] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.446855] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.446856] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.446856] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.446857] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.446867] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.446871] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.446873] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.446875] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.446879] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.446880] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.446887] e820: update [mem 0xb7683000-0xb7833fff] usable ==> reserved [ 0.446900] TSC deadline timer available [ 0.446900] smpboot: Allowing 20 CPUs, 0 hotplug CPUs [ 0.446914] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xa9aa0000-0xa9aa0fff] PM: hibernation: Registered nosave memory: [mem 0xa9ab0000-0xa9ab0fff] PM: hibernation: Registered nosave memory: [mem 0xa9ab1000-0xa9ab1fff] PM: hibernation: Registered nosave memory: [mem 0xa9ac2000-0xa9ac2fff] PM: hibernation: Registered nosave memory: [mem 0xa9ac3000-0xa9ac3fff] PM: hibernation: Registered nosave memory: [mem 0xa9acd000-0xa9acdfff] PM: hibernation: Registered nosave memory: [mem 0xa9ace000-0xa9acefff] PM: hibernation: Registered nosave memory: [mem 0xa9ae7000-0xa9ae7fff] PM: hibernation: Registered nosave memory: [mem 0xb7683000-0xb7833fff] PM: hibernation: Registered nosave memory: [mem 0xba201000-0xbb1e3fff] PM: hibernation: Registered nosave memory: [mem 0xbb1e4000-0xbb254fff] PM: hibernation: Registered nosave memory: [mem 0xbb255000-0xbd469fff] PM: hibernation: Registered nosave memory: [mem 0xbd46a000-0xbdd02fff] PM: hibernation: Registered nosave memory: [mem 0xbdd04000-0xbdd89fff] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff] [mem 0xbf000000-0xfed1bfff] available for PCI devices [ 0.446939] Booting paravirtualized kernel on bare hardware [ 0.446941] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.452676] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1 [ 0.453706] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.453711] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.453713] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.453722] pcpu-alloc: [0] 16 17 18 19 -- -- -- -- [ 0.453747] Fallback order for Node 0: 0 [ 0.453751] Built 1 zonelists, mobility grouping on. Total pages: 33006822 [ 0.453752] Policy zone: Normal [ 0.453878] Unknown kernel command line parameters "splash BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.3.10-200.fc38.x86_64", will be passed to user space. [ 0.453897] random: crng init done [ 0.460723] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.464079] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.464535] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.464544] software IO TLB: area num 32. [ 0.791747] Memory: 131527272K/134123608K available (18432K kernel code, 3257K rwdata, 14144K rodata, 4460K init, 17440K bss, 2596076K reserved, 0K cma-reserved) [ 0.791902] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1 [ 0.791915] Kernel/User page tables isolation: enabled [ 0.791949] ftrace: allocating 52013 entries in 204 pages [ 0.800369] ftrace: allocated 204 pages with 4 groups [ 0.801129] Dynamic Preempt: voluntary [ 0.801182] rcu: Preemptible hierarchical RCU implementation. [ 0.801183] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20. [ 0.801184] Trampoline variant of Tasks RCU enabled. [ 0.801185] Rude variant of Tasks RCU enabled. [ 0.801185] Tracing variant of Tasks RCU enabled. [ 0.801186] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.801186] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20 [ 0.804063] NR_IRQS: 524544, nr_irqs: 992, preallocated irqs: 16 [ 0.804244] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.804347] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.804387] Console: colour dummy device 80x25 [ 0.804389] printk: console [tty0] enabled [ 0.804443] ACPI: Core revision 20221020 [ 0.804674] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.804685] APIC: Switch to symmetric I/O mode setup [ 0.804687] DMAR: Host address width 46 [ 0.804688] DMAR: DRHD base: 0x000000fbffd000 flags: 0x0 [ 0.804693] DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205b [ 0.804695] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.804701] DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 0.804702] DMAR: RMRR base: 0x000000bdb74000 end: 0x000000bdb82fff [ 0.804704] DMAR: ATSR flags: 0x0 [ 0.804705] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.804707] DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1 [ 0.804709] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1 [ 0.804710] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.804711] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.804711] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.805268] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.805270] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.805273] Switched APIC routing to physical flat. [ 0.805758] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.810687] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b38ba7cde8, max_idle_ns: 440795324934 ns [ 0.810691] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.99 BogoMIPS (lpj=2998498) [ 0.810694] pid_max: default: 32768 minimum: 301 [ 0.815606] LSM: initializing lsm=lockdown,capability,yama,integrity,selinux,bpf,landlock [ 0.815618] Yama: becoming mindful. [ 0.815624] SELinux: Initializing. [ 0.815649] LSM support for eBPF active [ 0.815651] landlock: Up and running. [ 0.815788] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.815906] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.816114] CPU0: Thermal monitoring enabled (TM1) [ 0.816175] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.816177] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.816180] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.816182] Spectre V2 : Mitigation: Retpolines [ 0.816183] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.816183] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.816184] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.816185] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.816186] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.816188] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.816194] MDS: Mitigation: Clear CPU buffers [ 0.816195] TAA: Mitigation: Clear CPU buffers [ 0.816195] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.833315] Freeing SMP alternatives memory: 44K [ 0.833740] smpboot: CPU0: Intel(R) Core(TM) i7-6950X CPU @ 3.00GHz (family: 0x6, model: 0x4f, stepping: 0x1) [ 0.833869] cblist_init_generic: Setting adjustable number of callback queues. [ 0.833872] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.833887] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.833900] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.833913] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.833928] ... version: 3 [ 0.833929] ... bit width: 48 [ 0.833930] ... generic registers: 4 [ 0.833930] ... value mask: 0000ffffffffffff [ 0.833931] ... max period: 00007fffffffffff [ 0.833932] ... fixed-purpose events: 3 [ 0.833932] ... event mask: 000000070000000f [ 0.834042] Estimated ratio of average max frequency by base frequency (times 1024): 1160 [ 0.834060] rcu: Hierarchical SRCU implementation. [ 0.834061] rcu: Max phase no-delay instances is 400. [ 0.835322] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.835476] smp: Bringing up secondary CPUs ... [ 0.835558] x86: Booting SMP configuration: [ 0.835559] .... node #0, CPUs: #1 [ 0.002417] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors [ 0.838794] #2 #3 #4 #5 #6 #7 #8 #9 #10 [ 0.864807] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.864807] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.864807] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.864821] #11 #12 #13 #14 #15 #16 #17 #18 #19 [ 0.873504] smp: Brought up 1 node, 20 CPUs [ 0.873504] smpboot: Max logical packages: 1 [ 0.873504] smpboot: Total of 20 processors activated (119939.92 BogoMIPS) [ 0.877094] devtmpfs: initialized [ 0.877094] x86/mm: Memory block size: 2048MB [ 0.877879] ACPI: PM: Registering ACPI NVS region [mem 0xbb255000-0xbd469fff] (35737600 bytes) [ 0.878212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.878218] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.878318] pinctrl core: initialized pinctrl subsystem [ 0.878416] PM: RTC time: 18:03:42, date: 2023-07-02 [ 0.878938] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.879067] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.879077] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.879084] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.879101] thermal_sys: Registered thermal governor 'fair_share' [ 0.879101] thermal_sys: Registered thermal governor 'bang_bang' [ 0.879101] thermal_sys: Registered thermal governor 'step_wise' [ 0.879101] thermal_sys: Registered thermal governor 'user_space' [ 0.879101] cpuidle: using governor menu [ 0.879101] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.879101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.879101] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.879101] PCI: not using MMCONFIG [ 0.879101] PCI: Using configuration type 1 for base access [ 0.879692] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.879726] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.881699] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.881701] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.881702] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.881703] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.881738] cryptd: max_cpu_qlen set to 1000 [ 0.881738] raid6: skipped pq benchmark and selected avx2x4 [ 0.881738] raid6: using avx2x2 recovery algorithm [ 0.881778] ACPI: Added _OSI(Module Device) [ 0.881779] ACPI: Added _OSI(Processor Device) [ 0.881780] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.881781] ACPI: Added _OSI(Processor Aggregator Device) [ 0.911236] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.913772] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.931657] ACPI: EC: EC started [ 0.931658] ACPI: EC: interrupt blocked [ 0.931668] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.931671] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions [ 0.931672] ACPI: Interpreter enabled [ 0.931686] ACPI: PM: (supports S0 S3 S4 S5) [ 0.931687] ACPI: Using IOAPIC for interrupt routing [ 0.933631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.937311] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources [ 0.937313] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as EfiMemoryMappedIO [ 0.937326] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.937327] PCI: Using E820 reservations for host bridge windows [ 0.937875] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.964212] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.964217] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.966526] PCI host bridge to bus 0000:ff [ 0.966528] pci_bus 0000:ff: root bus resource [bus ff] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.966611] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.966671] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.966729] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.966789] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.966846] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.966904] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.966962] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.967021] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 [ 0.967078] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 [ 0.967135] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 [ 0.967192] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 [ 0.967249] pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000 [ 0.967306] pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000 [ 0.967367] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.967423] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 [ 0.967481] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.967539] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.967596] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.967657] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.967715] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.967774] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.967831] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.967888] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.967945] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.967972] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.968041] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.968165] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.968239] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.968310] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.968382] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.968454] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.968525] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.968584] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.968645] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.968720] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.968793] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.968865] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.968935] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.968995] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.969054] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.969113] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.969174] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.969246] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.969319] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.969391] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.969465] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 [ 0.969529] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 [ 0.969588] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 [ 0.969648] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 [ 0.969713] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 [ 0.969774] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 [ 0.969834] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 [ 0.969893] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 [ 0.969957] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.970015] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.970073] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.970132] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.970160] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.970221] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.970280] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.974320] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.974325] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.975343] PCI host bridge to bus 0000:00 [ 0.975345] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffbfff window] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.975511] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.975581] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.975754] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.975825] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.975987] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.976056] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.976208] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.976304] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.976421] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.976508] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 [ 0.976524] pci 0000:00:05.4: reg 0x10: [mem 0xfbf26000-0xfbf26fff] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 0.976821] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 0.976838] pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137] pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123] pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117] pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103] pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:11.4: reg 0x24: [mem 0xfbf25000-0xfbf257ff] pci 0000:00:11.4: PME# supported from D3hot [ 0.976988] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 0.977014] pci 0000:00:14.0: reg 0x10: [mem 0x383ffff00000-0x383ffff0ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.977184] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 0.977210] pci 0000:00:16.0: reg 0x10: [mem 0x383ffff17000-0x383ffff1700f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.977363] pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000 [ 0.977383] pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff] pci 0000:00:19.0: reg 0x14: [mem 0xfbf23000-0xfbf23fff] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.977546] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 0.977569] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf22000-0xfbf223ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.977751] pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300 [ 0.977773] pci 0000:00:1b.0: reg 0x10: [mem 0x383ffff10000-0x383ffff13fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.977917] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 0.978017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.978097] pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400 [ 0.978198] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.978282] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 0.978376] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.978459] pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400 [ 0.978552] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.978636] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 0.978659] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf21000-0xfbf213ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.978848] pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100 [ 0.979054] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 0.979069] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf20000-0xfbf207ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.979205] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 0.979226] pci 0000:00:1f.3: reg 0x10: [mem 0x383ffff15000-0x383ffff150ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] pci 0000:05:00.0: [8086:2701] type 00 class 0x010802 [ 0.979453] pci 0000:05:00.0: reg 0x10: [mem 0xfbd10000-0xfbd13fff 64bit] pci 0000:05:00.0: reg 0x30: [mem 0xfbd00000-0xfbd0ffff pref] pci 0000:05:00.0: enabling Extended Tags [ 0.979605] pci 0000:00:01.0: PCI bridge to [bus 05] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:04:00.0: [144d:a804] type 00 class 0x010802 [ 0.979759] pci 0000:04:00.0: reg 0x10: [mem 0xfbe00000-0xfbe03fff 64bit] pci 0000:00:02.0: PCI bridge to [bus 04] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 [ 0.980101] pci 0000:01:00.0: reg 0x10: [mem 0xfba00000-0xfba03fff] pci 0000:01:00.0: enabling Extended Tags [ 0.980203] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.980247] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.980326] pci 0000:00:03.0: PCI bridge to [bus 01-03] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbafffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 [ 0.980422] pci 0000:02:00.0: enabling Extended Tags [ 0.980483] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.980578] pci 0000:01:00.0: PCI bridge to [bus 02-03] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:03:00.0: [1002:731f] type 00 class 0x030000 [ 0.980646] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:03:00.0: reg 0x24: [mem 0xfb900000-0xfb97ffff] pci 0000:03:00.0: reg 0x30: [mem 0xfb980000-0xfb99ffff pref] pci 0000:03:00.0: enabling Extended Tags [ 0.980729] pci 0000:03:00.0: BAR 0: assigned to efifb [ 0.980775] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.980822] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.980882] pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300 [ 0.980896] pci 0000:03:00.1: reg 0x10: [mem 0xfb9a0000-0xfb9a3fff] pci 0000:03:00.1: enabling Extended Tags [ 0.980984] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.981054] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] pci 0000:02:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 06] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.981205] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.981239] pci 0000:07:00.0: reg 0x10: [mem 0xfbc00000-0xfbc7ffff] pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd01f] pci 0000:07:00.0: reg 0x1c: [mem 0xfbc80000-0xfbc83fff] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.981629] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] pci 0000:08:00.0: [1b21:1242] type 00 class 0x0c0330 [ 0.981729] pci 0000:08:00.0: reg 0x10: [mem 0xfbb00000-0xfbb07fff 64bit] pci 0000:08:00.0: enabling Extended Tags [ 0.981894] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.982039] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] pci 0000:09:00.0: [14e4:43a0] type 00 class 0x028000 [ 0.982138] pci 0000:09:00.0: reg 0x10: [mem 0xfb800000-0xfb807fff 64bit] pci 0000:09:00.0: reg 0x18: [mem 0xfb600000-0xfb7fffff 64bit] pci 0000:09:00.0: supports D1 D2 [ 0.982289] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.982490] pci 0000:00:1c.7: PCI bridge to [bus 09] pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb8fffff] pci_bus 0000:00: on NUMA node 0 [ 0.983151] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.983153] ACPI: PCI: Interrupt link LNKA disabled [ 0.983192] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.983193] ACPI: PCI: Interrupt link LNKB disabled [ 0.983232] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.983233] ACPI: PCI: Interrupt link LNKC disabled [ 0.983272] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.983272] ACPI: PCI: Interrupt link LNKD disabled [ 0.983311] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.983312] ACPI: PCI: Interrupt link LNKE disabled [ 0.983352] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.983353] ACPI: PCI: Interrupt link LNKF disabled [ 0.983391] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.983392] ACPI: PCI: Interrupt link LNKG disabled [ 0.983431] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.983432] ACPI: PCI: Interrupt link LNKH disabled [ 0.983573] ACPI: EC: interrupt unblocked [ 0.983574] ACPI: EC: event unblocked [ 0.983577] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.983578] ACPI: EC: GPE=0x1e [ 0.983579] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete [ 0.983581] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events [ 0.983707] iommu: Default domain type: Translated [ 0.983707] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.983764] SCSI subsystem initialized [ 0.983773] libata version 3.00 loaded. [ 0.983773] ACPI: bus type USB registered [ 0.983773] usbcore: registered new interface driver usbfs [ 0.983773] usbcore: registered new interface driver hub [ 0.983773] usbcore: registered new device driver usb [ 0.983773] pps_core: LinuxPPS API ver. 1 registered [ 0.983773] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.983773] PTP clock support registered [ 0.983781] EDAC MC: Ver: 3.0.0 [ 0.983829] efivars: Registered efivars operations [ 0.983890] NetLabel: Initializing [ 0.983892] NetLabel: domain hash size = 128 [ 0.983892] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.983909] NetLabel: unlabeled traffic allowed by default [ 0.983912] mctp: management component transport protocol core [ 0.983913] NET: Registered PF_MCTP protocol family [ 0.983916] PCI: Using ACPI for IRQ routing [ 0.989402] PCI: pci_cache_line_size set to 64 bytes [ 0.989518] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] e820: reserve RAM buffer [mem 0xa9aa0018-0xabffffff] e820: reserve RAM buffer [mem 0xa9ab1018-0xabffffff] e820: reserve RAM buffer [mem 0xa9ac3018-0xabffffff] e820: reserve RAM buffer [mem 0xa9ace018-0xabffffff] e820: reserve RAM buffer [mem 0xb7683000-0xb7ffffff] e820: reserve RAM buffer [mem 0xba201000-0xbbffffff] e820: reserve RAM buffer [mem 0xbdd04000-0xbfffffff] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.989559] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.989559] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.989559] vgaarb: loaded [ 0.989754] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.989754] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.991735] clocksource: Switched to clocksource tsc-early [ 1.002276] VFS: Disk quotas dquot_6.6.0 [ 1.002289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.002355] pnp: PnP ACPI init [ 1.002675] system 00:01: [io 0x0500-0x057f] has been reserved [ 1.002679] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.002680] system 00:01: [io 0x0580-0x059f] has been reserved [ 1.002682] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.002683] system 00:01: [io 0x0880-0x0883] has been reserved [ 1.002684] system 00:01: [io 0x0800-0x081f] has been reserved [ 1.002687] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 1.002689] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 1.002690] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 1.002692] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.002694] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 1.002695] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 1.002697] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 1.002801] system 00:02: [io 0x0290-0x029f] has been reserved [ 1.002967] pnp 00:03: [dma 0 disabled] pnp: PnP ACPI: found 4 devices [ 1.008886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.008945] NET: Registered PF_INET protocol family [ 1.009129] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.011903] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.012007] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.012030] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.012478] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.012768] TCP: Hash tables configured (established 524288 bind 65536) [ 1.012992] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 1.013088] UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.013312] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.013572] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.013578] NET: Registered PF_XDP protocol family [ 1.013594] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 1.013597] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 1.013599] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 1.013607] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0200000-0xd03fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x380000000000-0x3800001fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 05] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:02.0: PCI bridge to [bus 04] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] pci 0000:02:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: PCI bridge to [bus 02-03] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:03.0: PCI bridge to [bus 01-03] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbafffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 06] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff] pci 0000:00:1c.0: bridge window [mem 0x380000000000-0x3800001fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] pci 0000:00:1c.7: PCI bridge to [bus 09] pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb8fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfbffbfff window] pci_bus 0000:00: resource 8 [mem 0x380000000000-0x383fffffffff window] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfbafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfb900000-0xfb9fffff] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd03fffff] pci_bus 0000:06: resource 2 [mem 0x380000000000-0x3800001fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff] pci_bus 0000:09: resource 1 [mem 0xfb600000-0xfb8fffff] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] pci 0000:05:00.0: CLS mismatch (64 != 32), using 64 bytes [ 1.014400] pci 0000:03:00.0: disabling ATS [ 1.014440] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 1.014608] DMAR: [Firmware Bug]: RMRR entry for device 08:00.0 is broken - applying workaround [ 1.014612] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.014613] software IO TLB: mapped [mem 0x00000000a2c99000-0x00000000a6c99000] (64MB) [ 1.014618] Trying to unpack rootfs image as initramfs... [ 1.016237] Initialise system trusted keyrings [ 1.016247] Key type blacklist registered [ 1.016284] workingset: timestamp_bits=36 max_order=25 bucket_order=0 [ 1.016300] zbud: loaded [ 1.016680] integrity: Platform Keyring initialized [ 1.016685] integrity: Machine keyring initialized [ 1.025826] NET: Registered PF_ALG protocol family [ 1.025828] xor: automatically using best checksumming function avx [ 1.025830] Key type asymmetric registered [ 1.025831] Asymmetric key parser 'x509' registered [ 1.427484] Freeing initrd memory: 52352K [ 1.431278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.431317] io scheduler mq-deadline registered [ 1.431319] io scheduler kyber registered [ 1.431326] io scheduler bfq registered [ 1.432876] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.433354] pcieport 0000:00:01.0: PME: Signaling with IRQ 25 [ 1.433597] pcieport 0000:00:02.0: PME: Signaling with IRQ 27 [ 1.433811] pcieport 0000:00:03.0: PME: Signaling with IRQ 29 [ 1.433972] pcieport 0000:00:1c.0: PME: Signaling with IRQ 30 [ 1.433995] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.434199] pcieport 0000:00:1c.3: PME: Signaling with IRQ 31 [ 1.434313] pcieport 0000:00:1c.4: PME: Signaling with IRQ 32 [ 1.434466] pcieport 0000:00:1c.7: PME: Signaling with IRQ 33 [ 1.434769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.435027] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.435048] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.435105] ACPI: button: Power Button [PWRF] ACPI: \_SB_.SCK0.CP00: Found 1 idle states [ 1.435307] ACPI: \_SB_.SCK0.CP01: Found 1 idle states [ 1.435416] ACPI: \_SB_.SCK0.CP02: Found 1 idle states [ 1.435578] ACPI: \_SB_.SCK0.CP03: Found 1 idle states [ 1.435691] ACPI: \_SB_.SCK0.CP04: Found 1 idle states [ 1.435800] ACPI: \_SB_.SCK0.CP05: Found 1 idle states [ 1.435910] ACPI: \_SB_.SCK0.CP06: Found 1 idle states [ 1.436053] ACPI: \_SB_.SCK0.CP07: Found 1 idle states [ 1.436190] ACPI: \_SB_.SCK0.CP08: Found 1 idle states [ 1.436332] ACPI: \_SB_.SCK0.CP09: Found 1 idle states [ 1.436475] ACPI: \_SB_.SCK0.CP0A: Found 1 idle states [ 1.436588] ACPI: \_SB_.SCK0.CP0B: Found 1 idle states [ 1.436760] ACPI: \_SB_.SCK0.CP0C: Found 1 idle states [ 1.436938] ACPI: \_SB_.SCK0.CP0D: Found 1 idle states [ 1.437109] ACPI: \_SB_.SCK0.CP0E: Found 1 idle states [ 1.437247] ACPI: \_SB_.SCK0.CP0F: Found 1 idle states [ 1.437385] ACPI: \_SB_.SCK0.CP10: Found 1 idle states [ 1.437529] ACPI: \_SB_.SCK0.CP11: Found 1 idle states [ 1.437665] ACPI: \_SB_.SCK0.CP12: Found 1 idle states [ 1.437804] ACPI: \_SB_.SCK0.CP13: Found 1 idle states [ 1.438303] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.438357] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.440245] Non-volatile memory driver v1.3 [ 1.440250] Linux agpgart interface v0.103 [ 1.440382] ACPI: bus type drm_connector registered [ 1.441403] ahci 0000:00:11.4: version 3.0 [ 1.441408] ahci 0000:00:11.4: enabling device (0000 -> 0003) [ 1.441546] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.441549] ahci 0000:00:11.4: flags: 64bit ncq led clo pio ems apst [ 1.444630] scsi host0: ahci [ 1.444713] scsi host1: ahci [ 1.444785] scsi host2: ahci [ 1.444856] scsi host3: ahci [ 1.444885] ata1: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25100 irq 35 [ 1.444887] ata2: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25180 irq 35 [ 1.444888] ata3: DUMMY [ 1.444889] ata4: DUMMY [ 1.444922] ahci 0000:00:1f.2: enabling device (0000 -> 0003) [ 1.445053] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x7 impl SATA mode [ 1.445056] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 1.450632] scsi host4: ahci [ 1.450703] scsi host5: ahci [ 1.450773] scsi host6: ahci [ 1.450840] scsi host7: ahci [ 1.450869] ata5: SATA max UDMA/133 abar m2048@0xfbf20000 port 0xfbf20100 irq 36 [ 1.450870] ata6: SATA max UDMA/133 abar m2048@0xfbf20000 port 0xfbf20180 irq 36 [ 1.450872] ata7: SATA max UDMA/133 abar m2048@0xfbf20000 port 0xfbf20200 irq 36 [ 1.450873] ata8: DUMMY [ 1.451266] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.451368] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.451378] ehci-pci 0000:00:1a.0: debug port 2 [ 1.455285] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf22000 [ 1.461425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.461468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.461470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.461472] usb usb1: Product: EHCI Host Controller [ 1.461473] usb usb1: Manufacturer: Linux 6.3.10-200.fc38.x86_64 ehci_hcd [ 1.461474] usb usb1: SerialNumber: ... [ 1.461568] hub 1-0:1.0: USB hub found [ 1.461573] hub 1-0:1.0: 2 ports detected [ 1.461695] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.461729] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.461739] ehci-pci 0000:00:1d.0: debug port 2 [ 1.465657] ehci-pci 0000:00:1d.0: irq 21, io mem 0xfbf21000 [ 1.472425] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.472454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.472455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.472457] usb usb2: Product: EHCI Host Controller [ 1.472458] usb usb2: Manufacturer: Linux 6.3.10-200.fc38.x86_64 ehci_hcd [ 1.472459] usb usb2: SerialNumber: ... [ 1.472541] hub 2-0:1.0: USB hub found [ 1.472545] hub 2-0:1.0: 2 ports detected [ 1.472653] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.472686] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.473744] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.473913] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.473938] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.473942] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.473974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.473976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.473977] usb usb3: Product: xHCI Host Controller [ 1.473978] usb usb3: Manufacturer: Linux 6.3.10-200.fc38.x86_64 xhci-hcd [ 1.473979] usb usb3: SerialNumber: ... [ 1.474083] hub 3-0:1.0: USB hub found [ 1.474100] hub 3-0:1.0: 15 ports detected [ 1.476973] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 1.476976] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.476977] usb usb4: Product: xHCI Host Controller [ 1.476978] usb usb4: Manufacturer: Linux 6.3.10-200.fc38.x86_64 xhci-hcd [ 1.476979] usb usb4: SerialNumber: ... [ 1.477060] hub 4-0:1.0: USB hub found [ 1.477071] hub 4-0:1.0: 6 ports detected [ 1.478392] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 1.478435] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5 [ 1.537193] xhci_hcd 0000:08:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010 [ 1.537460] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 1.537587] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6 [ 1.537589] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.537625] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.537627] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.537628] usb usb5: Product: xHCI Host Controller [ 1.537629] usb usb5: Manufacturer: Linux 6.3.10-200.fc38.x86_64 xhci-hcd [ 1.537630] usb usb5: SerialNumber: ... [ 1.537699] hub 5-0:1.0: USB hub found [ 1.537706] hub 5-0:1.0: 2 ports detected [ 1.537767] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.537781] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 1.537783] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.537784] usb usb6: Product: xHCI Host Controller [ 1.537785] usb usb6: Manufacturer: Linux 6.3.10-200.fc38.x86_64 xhci-hcd [ 1.537786] usb usb6: SerialNumber: ... [ 1.537852] hub 6-0:1.0: USB hub found [ 1.537858] hub 6-0:1.0: 2 ports detected [ 1.537938] usbcore: registered new interface driver usbserial_generic [ 1.537943] usbserial: USB Serial support registered for generic [ 1.537963] i8042: PNP: No PS/2 controller found. [ 1.537990] mousedev: PS/2 mouse device common for all mice [ 1.538048] rtc_cmos 00:00: RTC can wake from S4 [ 1.538250] rtc_cmos 00:00: registered as rtc0 [ 1.538283] rtc_cmos 00:00: setting system clock to 2023-07-02T18:03:43 UTC (1688321023) [ 1.538303] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 1.538504] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.538509] device-mapper: uevent: version 1.0.3 [ 1.538547] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 1.538620] intel_pstate: Intel P-state driver initializing [ 1.539901] pmd_set_huge: Cannot satisfy [mem 0xc0000000-0xc0200000] with a huge-page mapping due to MTRR override. [ 1.540068] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 1.540673] fbcon: Deferring console take-over [ 1.540677] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 1.540810] hid: raw HID events driver (C) Jiri Kosina [ 1.540861] usbcore: registered new interface driver usbhid [ 1.540863] usbhid: USB HID core driver [ 1.541146] drop_monitor: Initializing network drop monitor service [ 1.553325] Initializing XFRM netlink socket [ 1.553356] NET: Registered PF_INET6 protocol family [ 1.557994] Segment Routing with IPv6 [ 1.557995] RPL Segment Routing with IPv6 [ 1.558000] In-situ OAM (IOAM) with IPv6 [ 1.558016] mip6: Mobile IPv6 [ 1.558018] NET: Registered PF_PACKET protocol family [ 1.559310] microcode: Microcode Update Driver: v2.2. [ 1.559436] resctrl: L3 allocation detected [ 1.559437] resctrl: L3 monitoring detected [ 1.559441] IPI shorthand broadcast: enabled [ 1.559445] AVX2 version of gcm_enc/dec engaged. [ 1.559502] AES CTR mode by8 optimization enabled [ 1.560855] sched_clock: Marking stable (1559001462, 1417679)->(1608470259, -48051118) [ 1.561241] registered taskstats version 1 [ 1.561547] Loading compiled-in X.509 certificates [ 1.571041] Loaded X.509 cert 'Fedora kernel signing key: 70d8c04920e52cbc4606022bce50ec091797607d' [ 1.571489] zswap: loaded using pool lzo/zbud [ 1.573450] page_owner is disabled [ 1.573484] Key type .fscrypt registered [ 1.573485] Key type fscrypt-provisioning registered [ 1.573802] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 1.573812] Key type big_key registered [ 1.577466] Key type encrypted registered [ 1.577594] ima: No TPM chip found, activating TPM-bypass! [ 1.577596] Loading compiled-in module X.509 certificates [ 1.578032] Loaded X.509 cert 'Fedora kernel signing key: 70d8c04920e52cbc4606022bce50ec091797607d' [ 1.578034] ima: Allocated hash algorithm: sha256 [ 1.578042] ima: No architecture policies found [ 1.578053] evm: Initialising EVM extended attributes: [ 1.578053] evm: security.selinux [ 1.578054] evm: security.SMACK64 (disabled) [ 1.578055] evm: security.SMACK64EXEC (disabled) [ 1.578055] evm: security.SMACK64TRANSMUTE (disabled) [ 1.578056] evm: security.SMACK64MMAP (disabled) [ 1.578056] evm: security.apparmor (disabled) [ 1.578057] evm: security.ima [ 1.578057] evm: security.capability [ 1.578058] evm: HMAC attrs: 0x1 [ 1.619618] alg: No test for 842 (842-scomp) [ 1.619642] alg: No test for 842 (842-generic) [ 1.721282] PM: Magic number: 15:577:88 [ 1.726849] RAS: Correctable Errors collector initialized. [ 1.754524] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.754547] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.754548] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.754568] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.754601] ata2.00: ATA-10: INTEL SSDSC2KB240G7, SCV10121, max UDMA/133 [ 1.754603] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32) [ 1.754632] ata1.00: ATA-10: INTEL SSDSC2KB240G8, XCV10100, max UDMA/133 [ 1.754637] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32) [ 1.754705] ata2.00: configured for UDMA/133 [ 1.754750] ata1.00: configured for UDMA/133 [ 1.754842] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KB24 0100 PQ: 0 ANSI: 5 [ 1.755112] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.755221] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2KB24 0121 PQ: 0 ANSI: 5 [ 1.755265] ata1.00: Enabling discard_zeroes_data [ 1.755293] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.755299] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.755319] sd 0:0:0:0: [sda] Write Protect is off [ 1.755324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.755354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.755393] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.755400] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.755445] ata2.00: Enabling discard_zeroes_data [ 1.755470] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.755472] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.755486] sd 1:0:0:0: [sdb] Write Protect is off [ 1.755489] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.755491] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.755527] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.755562] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.755969] ata1.00: Enabling discard_zeroes_data [ 1.756076] ata2.00: Enabling discard_zeroes_data [ 1.756365] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.756473] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.757257] ata7.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.757264] ata7.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.759066] ata7.00: ATAPI: MATSHITADVDRW UJ8A7AF, 1.00, max UDMA/100 [ 1.759425] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 1.759431] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.759445] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.762694] ata7.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.762700] ata7.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.764506] ata7.00: configured for UDMA/100 [ 1.789366] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.789373] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.790776] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.790783] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.796918] ata6.00: ATA-9: INTEL SSDSC2BW240A4, DC12, max UDMA/133 [ 1.797851] ata5.00: ATA-9: INTEL SSDSC2BW240A4, DC12, max UDMA/133 [ 1.798762] ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.799704] ata5.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.825462] ata6.00: Features: Dev-Sleep [ 1.826397] ata5.00: Features: Dev-Sleep [ 1.837286] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.837292] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.838229] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.838235] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.875464] ata6.00: configured for UDMA/133 [ 1.876401] ata5.00: configured for UDMA/133 [ 1.876547] scsi 4:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC12 PQ: 0 ANSI: 5 [ 1.876910] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.876929] sd 4:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.876952] sd 4:0:0:0: [sdc] Write Protect is off [ 1.876955] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.877005] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.877057] sd 4:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 1.877122] scsi 5:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC12 PQ: 0 ANSI: 5 [ 1.877522] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.877528] sd 5:0:0:0: [sdd] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.877536] sd 5:0:0:0: [sdd] Write Protect is off [ 1.877539] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.877550] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.877567] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [ 1.877670] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.878255] sd 5:0:0:0: [sdd] Attached SCSI disk [ 1.880223] scsi 6:0:0:0: CD-ROM MATSHITA DVDRW UJ8A7AF 1.00 PQ: 0 ANSI: 5 [ 1.887451] usb 3-2: New USB device found, idVendor=0424, idProduct=2734, bcdDevice= 1.36 [ 1.887458] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.887462] usb 3-2: Product: USB2734 [ 1.887464] usb 3-2: Manufacturer: Microchip Tech [ 1.888048] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 1.888054] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.888141] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 1.888146] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.888371] hub 1-1:1.0: USB hub found [ 1.888464] hub 2-1:1.0: USB hub found [ 1.888806] hub 3-2:1.0: USB hub found [ 1.888817] hub 2-1:1.0: 8 ports detected [ 1.888826] hub 1-1:1.0: 6 ports detected [ 1.888871] hub 3-2:1.0: 5 ports detected [ 1.901062] sr 6:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy [ 1.901067] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.907900] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 1.907963] sr 6:0:0:0: Attached scsi generic sg4 type 5 [ 1.909893] Freeing unused decrypted memory: 2036K [ 1.910811] Freeing unused kernel image (initmem) memory: 4460K [ 1.910862] Write protecting the kernel read-only data: 32768k [ 1.911093] Freeing unused kernel image (rodata/data gap) memory: 192K [ 1.966177] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.966178] x86/mm: Checking user space page tables [ 1.999458] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2.006294] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.006298] Run /init as init process [ 2.006299] with arguments: [ 2.006300] /init [ 2.006301] splash [ 2.006301] with environment: [ 2.006302] HOME=/ [ 2.006302] TERM=linux [ 2.006303] BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.3.10-200.fc38.x86_64 [ 2.012325] usb 4-2: New USB device found, idVendor=0424, idProduct=5734, bcdDevice= 1.36 [ 2.012331] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.012335] usb 4-2: Product: USB5734 [ 2.012338] usb 4-2: Manufacturer: Microchip Tech [ 2.013597] hub 4-2:1.0: USB hub found [ 2.013624] hub 4-2:1.0: 5 ports detected [ 2.019840] fbcon: Taking over console [ 2.021534] Console: switching to colour frame buffer device 128x48 [ 2.053423] tsc: Refined TSC clocksource calibration: 2998.262 MHz [ 2.053430] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b37db7b5d5, max_idle_ns: 440795229237 ns [ 2.053460] clocksource: Switched to clocksource tsc [ 2.125431] usb 3-6: new full-speed USB device number 3 using xhci_hcd [ 2.196605] fuse: init (API version 7.38) [ 2.198319] i2c_dev: i2c /dev entries driver [ 2.253728] usb 3-6: New USB device found, idVendor=0b05, idProduct=180a, bcdDevice= 1.12 [ 2.253732] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.253734] usb 3-6: Product: BCM20702A0 [ 2.253736] usb 3-6: Manufacturer: Broadcom Corp [ 2.253737] usb 3-6: SerialNumber: ... [ 2.368442] usb 3-14: new full-speed USB device number 4 using xhci_hcd [ 2.495811] usb 3-14: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.90 [ 2.495821] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.495825] usb 3-14: Product: Back-UPS NS 900M FW:932.a10.D USB FW:a10 [ 2.495828] usb 3-14: Manufacturer: American Power Conversion [ 2.495830] usb 3-14: SerialNumber: ... [ 2.501292] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS NS 900M FW:932.a10.D USB FW:a10] on usb-0000:00:14.0-14/input0 [ 2.617430] usb 3-2.1: new full-speed USB device number 5 using xhci_hcd [ 2.656476] BTRFS: device label ... devid 3 transid 133781 /dev/sda scanned by (udev-worker) (532) [ 2.657877] BTRFS: device label ... devid 7 transid 133781 /dev/sdb scanned by (udev-worker) (520) [ 2.672825] BTRFS: device label ... devid 6 transid 133781 /dev/sdd scanned by (udev-worker) (523) [ 2.673455] BTRFS: device label ... devid 5 transid 133781 /dev/sdc scanned by (udev-worker) (536) [ 2.700695] dca service started, version 1.12.1 [ 2.707022] usb 3-2.1: New USB device found, idVendor=1532, idProduct=0204, bcdDevice= 2.00 [ 2.707026] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.707028] usb 3-2.1: Product: Razer DeathStalker Chroma [ 2.707029] usb 3-2.1: Manufacturer: Razer [ 2.709700] e1000e: Intel(R) PRO/1000 Network Driver [ 2.709702] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.709891] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.720519] nvme nvme0: pci function 0000:04:00.0 [ 2.720675] nvme nvme1: pci function 0000:05:00.0 [ 2.720678] nvme 0000:05:00.0: enabling device (0100 -> 0102) [ 2.721366] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.721368] igb: Copyright (c) 3B2C-7BF4 Intel Corporation. [ 2.723671] input: Razer Razer DeathStalker Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:1532:0204.0002/input/input2 [ 2.726266] nvme nvme1: 20/0/0 default/read/poll queues [ 2.734117] nvme nvme0: 7/0/0 default/read/poll queues [ 2.748821] pps pps0: new PPS source ptp0 [ 2.748848] igb 0000:07:00.0: added PHC on eth0 [ 2.748849] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.748850] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 7E0283D179EB0300C897E4AB6B3A0EE0 [ 2.748902] igb 0000:07:00.0: eth0: PBA No: 000300-000 [ 2.748904] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.749360] nvme0n1: p1 p2 p3 [ 2.755055] igb 0000:07:00.0 enp7s0: renamed from eth0 [ 2.758175] BTRFS: device label ... devid 2 transid 133781 /dev/nvme1n1 scanned by (udev-worker) (535) [ 2.762460] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.767213] BTRFS: device label ... devid 1 transid 133781 /dev/nvme0n1p3 scanned by (udev-worker) (549) [ 2.773527] usb 4-2.3: new SuperSpeed USB device number 3 using xhci_hcd [ 2.778321] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.778363] hid-generic 0003:1532:0204.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathStalker Chroma] on usb-0000:00:14.0-2.1/input0 [ 2.779246] input: Razer Razer DeathStalker Chroma Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:1532:0204.0003/input/input3 [ 2.789326] usb 4-2.3: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54 [ 2.789329] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.789331] usb 4-2.3: Product: USB3.1 Hub [ 2.789332] usb 4-2.3: Manufacturer: GenesysLogic [ 2.791035] hub 4-2.3:1.0: USB hub found [ 2.791985] hub 4-2.3:1.0: 4 ports detected [ 2.831487] input: Razer Razer DeathStalker Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:1532:0204.0003/input/input4 [ 2.831526] hid-generic 0003:1532:0204.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathStalker Chroma] on usb-0000:00:14.0-2.1/input1 [ 2.832115] input: Razer Razer DeathStalker Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:1532:0204.0004/input/input5 [ 2.832194] hid-generic 0003:1532:0204.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathStalker Chroma] on usb-0000:00:14.0-2.1/input2 [ 2.840644] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) BD29A0869AE2ED365471C3E434DCC371 [ 2.840647] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.840671] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.842059] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 2.909423] usb 3-2.2: new full-speed USB device number 6 using xhci_hcd [ 3.001170] usb 3-2.2: New USB device found, idVendor=1532, idProduct=0043, bcdDevice= 2.00 [ 3.001175] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.001176] usb 3-2.2: Product: Razer DeathAdder Chroma [ 3.001177] usb 3-2.2: Manufacturer: Razer [ 3.008678] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:1532:0043.0005/input/input6 [ 3.008752] hid-generic 0003:1532:0043.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.2/input0 [ 3.010614] input: Razer Razer DeathAdder Chroma Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:1532:0043.0006/input/input7 [ 3.062506] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:1532:0043.0006/input/input8 [ 3.062557] hid-generic 0003:1532:0043.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.2/input1 [ 3.063332] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:1532:0043.0007/input/input9 [ 3.114475] hid-generic 0003:1532:0043.0007: input,hidraw6: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.2/input2 [ 3.190434] usb 3-2.3: new high-speed USB device number 7 using xhci_hcd [ 3.207698] BTRFS info (device nvme0n1p3): using crc32c (crc32c-intel) checksum algorithm [ 3.207706] BTRFS info (device nvme0n1p3): using free space tree [ 3.274624] BTRFS info (device nvme0n1p3): enabling ssd optimizations [ 3.274627] BTRFS info (device nvme0n1p3): auto enabling async discard [ 3.280849] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 3.280853] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.280855] usb 3-2.3: Product: USB2.1 Hub [ 3.280857] usb 3-2.3: Manufacturer: GenesysLogic [ 3.281280] hub 3-2.3:1.0: USB hub found [ 3.281569] hub 3-2.3:1.0: 4 ports detected [ 3.358438] usb 3-2.5: new high-speed USB device number 8 using xhci_hcd [ 3.450174] usb 3-2.5: New USB device found, idVendor=0424, idProduct=274c, bcdDevice= 2.00 [ 3.450179] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.450183] usb 3-2.5: Product: Hub Controller [ 3.450185] usb 3-2.5: Manufacturer: Microchip Tech [ 3.452172] hid-generic 0003:0424:274C.0008: hiddev97,hidraw7: USB HID v1.10 Device [Microchip Tech Hub Controller] on usb-0000:00:14.0-2.5/input0 [ 3.581425] usb 3-2.3.1: new full-speed USB device number 9 using xhci_hcd [ 3.703904] usb 3-2.3.1: New USB device found, idVendor=1038, idProduct=12b4, bcdDevice= 1.05 [ 3.703907] usb 3-2.3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 3.703910] usb 3-2.3.1: Product: SteelSeries Arctis 1 Wireless Bootloader [ 3.703911] usb 3-2.3.1: Manufacturer: SteelSeries [ 3.725511] input: SteelSeries SteelSeries Arctis 1 Wireless Bootloader as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.0/0003:1038:12B4.0009/input/input10 [ 3.725566] input: SteelSeries SteelSeries Arctis 1 Wireless Bootloader as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.0/0003:1038:12B4.0009/input/input11 [ 3.725647] hid-generic 0003:1038:12B4.0009: input,hiddev98,hidraw8: USB HID v1.11 Device [SteelSeries SteelSeries Arctis 1 Wireless Bootloader] on usb-0000:00:14.0-2.3.1/input0 [ 4.907070] [drm] amdgpu kernel modesetting enabled. [ 4.907131] amdgpu: CRAT table not found [ 4.907133] amdgpu: Virtual CRAT table created for CPU [ 4.907143] amdgpu: Topology: Add CPU node [ 4.907255] amdgpu 0000:03:00.0: enabling device (0106 -> 0107) [ 4.907326] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x148C:0x2398 0xC1). [ 4.907340] [drm] register mmio base: 0xFB900000 [ 4.907342] [drm] register mmio size: 524288 [ 4.908568] [drm] add ip block number 0 <nv_common> [ 4.908570] [drm] add ip block number 1 <gmc_v10_0> [ 4.908572] [drm] add ip block number 2 <navi10_ih> [ 4.908573] [drm] add ip block number 3 <psp> [ 4.908575] [drm] add ip block number 4 <smu> [ 4.908576] [drm] add ip block number 5 <dm> [ 4.908577] [drm] add ip block number 6 <gfx_v10_0> [ 4.908578] [drm] add ip block number 7 <sdma_v5_0> [ 4.908580] [drm] add ip block number 8 <vcn_v2_0> [ 4.908581] [drm] add ip block number 9 <jpeg_v2_0> [ 4.908609] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT [ 4.908612] amdgpu: ATOM BIOS: 111 [ 4.954623] [drm] VCN decode is enabled in VM mode [ 4.954624] [drm] VCN encode is enabled in VM mode [ 4.976934] [drm] JPEG decode is enabled in VM mode [ 4.980571] Console: switching to colour dummy device 80x25 [ 4.997597] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 4.997600] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 4.997651] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 4.997663] amdgpu 0000:03:00.0: BAR 2: releasing [mem 0xd0000000-0xd01fffff 64bit pref] amdgpu 0000:03:00.0: BAR 0: releasing [mem 0xc0000000-0xcfffffff 64bit pref] pcieport 0000:02:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] pcieport 0000:01:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] pcieport 0000:00:03.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] pcieport 0000:00:03.0: BAR 15: assigned [mem 0x380100000000-0x3803ffffffff 64bit pref] pcieport 0000:01:00.0: BAR 15: assigned [mem 0x380100000000-0x3803ffffffff 64bit pref] pcieport 0000:02:00.0: BAR 15: assigned [mem 0x380100000000-0x3803ffffffff 64bit pref] amdgpu 0000:03:00.0: BAR 0: assigned [mem 0x380200000000-0x3803ffffffff 64bit pref] amdgpu 0000:03:00.0: BAR 2: assigned [mem 0x380100000000-0x3801001fffff 64bit pref] pcieport 0000:00:03.0: PCI bridge to [bus 01-03] pcieport 0000:00:03.0: bridge window [io 0xe000-0xefff] pcieport 0000:00:03.0: bridge window [mem 0xfb900000-0xfbafffff] pcieport 0000:00:03.0: bridge window [mem 0x380100000000-0x3803ffffffff 64bit pref] pcieport 0000:01:00.0: PCI bridge to [bus 02-03] pcieport 0000:01:00.0: bridge window [io 0xe000-0xefff] pcieport 0000:01:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pcieport 0000:01:00.0: bridge window [mem 0x380100000000-0x3803ffffffff 64bit pref] pcieport 0000:02:00.0: PCI bridge to [bus 03] pcieport 0000:02:00.0: bridge window [io 0xe000-0xefff] pcieport 0000:02:00.0: bridge window [mem 0xfb900000-0xfb9fffff] pcieport 0000:02:00.0: bridge window [mem 0x380100000000-0x3803ffffffff 64bit pref] amdgpu 0000:03:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [ 4.997801] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 4.997803] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF [ 4.997810] [drm] Detected VRAM RAM=8176M, BAR=8192M [ 4.997811] [drm] RAM width 256bits GDDR6 [ 4.997929] [drm] amdgpu: 8176M of VRAM memory ready [ 4.997931] [drm] amdgpu: 64352M of GTT memory ready. [ 4.997940] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.998020] [drm] PCIE GART of 512M enabled (table at 0x00000081FEE00000). [ 5.000712] [drm] Found VCN firmware Version ENC: 1.20 DEC: 5 VEP: 0 Revision: 1 [ 5.000719] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware [ 5.052432] [drm] reserve 0x900000 from 0x81fd000000 for PSP TMR [ 5.094638] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 5.100532] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 5.100534] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 5.100581] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable [ 5.100583] amdgpu 0000:03:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5 [ 5.135882] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully! [ 5.136097] [drm] Display Core initialized with v3.2.223! [ 5.136098] [drm] DP-HDMI FRL PCON supported [ 5.441681] [drm] kiq ring mec 2 pipe 1 q 0 [ 5.444067] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 5.444469] [drm] JPEG decode initialized successfully. [ 5.451097] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 5.451223] amdgpu: sdma_bitmap: ffff [ 5.485616] memmap_init_zone_device initialised 2097152 pages in 19ms [ 5.485623] amdgpu: HMM registered 8176MB device memory [ 5.485708] amdgpu: Virtual CRAT table created for GPU [ 5.485875] amdgpu: Topology: Add dGPU node [0x731f:0x1002] kfd kfd: amdgpu: added device 1002:731f [ 5.485892] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40 [ 5.485975] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 5.485977] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 5.485979] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 5.485980] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 5.485981] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 5.485982] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 5.485983] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 5.485984] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 5.485985] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 5.485986] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 5.485987] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 5.485988] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0 [ 5.485989] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1 [ 5.485990] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1 [ 5.485991] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1 [ 5.485992] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1 [ 5.487484] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm [ 5.487933] [drm] Initialized amdgpu 3.52.0 20150101 for 0000:03:00.0 on minor 1 [ 5.500344] fbcon: amdgpudrmfb (fb0) is primary device [ 5.500677] [drm] DSC precompute is not needed. [ 5.743072] Console: switching to colour frame buffer device 320x90 [ 5.777868] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 6.781966] SELinux: policy capability network_peer_controls=1 [ 6.781971] SELinux: policy capability open_perms=1 [ 6.781972] SELinux: policy capability extended_socket_class=1 [ 6.781973] SELinux: policy capability always_check_network=0 [ 6.781975] SELinux: policy capability cgroup_seclabel=1 [ 6.781976] SELinux: policy capability nnp_nosuid_transition=1 [ 6.781977] SELinux: policy capability genfs_seclabel_symlinks=1 [ 6.781978] SELinux: policy capability ioctl_skip_cloexec=0 [ 7.126924] zram: Added device: zram0 [ 7.388662] loop: module loaded [ 7.439125] BTRFS info (device nvme0n1p3: state M): use zstd compression, level 1 [ 7.854453] zram0: detected capacity change from 0 to 16777216 [ 7.991034] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 8.028543] bcma-pci-bridge 0000:09:00.0: enabling device (0000 -> 0002) [ 8.028646] bcma-pci-bridge 0000:09:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00 [ 8.028676] bcma-pci-bridge 0000:09:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0) [ 8.028693] bcma-pci-bridge 0000:09:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0) [ 8.028721] bcma-pci-bridge 0000:09:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0) [ 8.028751] bcma-pci-bridge 0000:09:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0) [ 8.028767] bcma-pci-bridge 0000:09:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0) [ 8.028845] bcma-pci-bridge 0000:09:00.0: bus0: Using fallback SPROM failed (err -2) [ 8.028847] bcma-pci-bridge 0000:09:00.0: bus0: No SPROM available [ 8.030208] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) [ 8.030310] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 8.031626] bcma-pci-bridge 0000:09:00.0: bus0: Bus registered [ 8.034064] i2c i2c-9: 4/4 memory slots populated (from DMI) [ 8.037226] i2c i2c-9: Successfully instantiated SPD at 0x53 [ 8.043238] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 8.104655] iTCO_vendor_support: vendor-support=0 [ 8.104832] asus_wmi: ASUS WMI generic driver loaded [ 8.109590] asus_wmi: Initialization: 0x0 [ 8.109620] asus_wmi: BIOS WMI version: 0.9 [ 8.109665] asus_wmi: SFUN value: 0x0 [ 8.109667] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 8.110464] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 8.110504] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer [ 8.110507] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.112727] iTCO_wdt iTCO_wdt.1.auto: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 8.113074] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 8.113490] ee1004 9-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 8.271148] Bluetooth: Core ver 2.22 [ 8.271167] NET: Registered PF_BLUETOOTH protocol family [ 8.271168] Bluetooth: HCI device and connection manager initialized [ 8.271174] Bluetooth: HCI socket layer initialized [ 8.271176] Bluetooth: L2CAP socket layer initialized [ 8.271180] Bluetooth: SCO socket layer initialized [ 8.305958] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 8.306272] snd_hda_intel 0000:03:00.1: enabling device (0100 -> 0102) [ 8.306438] snd_hda_intel 0000:03:00.1: Force to non-snoop mode [ 8.306702] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.307312] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.323891] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 8.331738] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input14 [ 8.331819] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input15 [ 8.331870] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input16 [ 8.331937] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input17 [ 8.332007] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input18 [ 8.332088] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input19 [ 8.332178] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 8.332190] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 8.332203] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 8.332209] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 8.332213] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 8.332217] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 8.332220] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 8.332225] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 8.332228] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 8.332232] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 8.332236] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 8.332240] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 8.332244] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 8.332248] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 8.332252] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 8.332257] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 8.332260] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 8.332266] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 8.332271] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 8.332277] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 8.332282] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 8.332288] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 8.332291] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 8.332296] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 8.332299] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 8.332303] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 8.332307] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 8.332335] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 8.332339] EDAC sbridge: Couldn't find mci handler [ 8.332341] EDAC sbridge: Failed to register device with error -19. [ 8.337622] usbcore: registered new interface driver btusb [ 8.364495] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 8.365018] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 8.365023] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.365027] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.365029] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.365031] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 8.365033] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.365035] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 8.365038] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 8.365040] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 8.371370] intel_rapl_common: Found RAPL domain package [ 8.386026] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 8.386067] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 8.386100] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 8.386131] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 8.386162] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 [ 8.386192] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [ 8.386222] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [ 8.447427] Bluetooth: hci0: BCM: chip id 63 [ 8.448428] Bluetooth: hci0: BCM: features 0x07 [ 8.464423] Bluetooth: hci0: ... [ 8.464425] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 8.465732] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 8.465734] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0b05-180a.hcd' [ 8.465734] Bluetooth: hci0: BCM: 'brcm/BCM-0b05-180a.hcd' [ 8.466525] b43-phy0: Broadcom 4360 WLAN found (core revision 42) [ 8.489990] bcma-pci-bridge 0000:09:00.0: bus0: HT force timeout [ 8.512378] EXT4-fs (nvme0n1p2): mounted filesystem HASH_D01-7AF0-7D9C-0577-0AD79A1B28E7 with ordered data mode. Quota mode: none. [ 8.644255] bcma-pci-bridge 0000:09:00.0: bus0: PLL enable timeout [ 8.644266] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1) [ 8.644284] b43: probe of bcma0:1 failed with error -95 [ 8.644322] Broadcom 43xx driver loaded [ Features: PNLS ] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.011218] Bluetooth: BNEP filters: protocol multicast [ 9.011222] Bluetooth: BNEP socket layer initialized [ 9.012112] Bluetooth: MGMT ver 1.22 [ 12.317667] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.317702] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 44.274153] SELinux: Converting 377 SID table entries... [ 44.278468] SELinux: policy capability network_peer_controls=1 [ 44.278470] SELinux: policy capability open_perms=1 [ 44.278471] SELinux: policy capability extended_socket_class=1 [ 44.278471] SELinux: policy capability always_check_network=0 [ 44.278472] SELinux: policy capability cgroup_seclabel=1 [ 44.278472] SELinux: policy capability nnp_nosuid_transition=1 [ 44.278473] SELinux: policy capability genfs_seclabel_symlinks=1 [ 44.278474] SELinux: policy capability ioctl_skip_cloexec=0 [ 81.933146] EXT4-fs (nvme0n1p2): unmounting filesystem HASH_D01-7AF0-7D9C-0577-0AD79A1B28E7. [ 82.087236] zram0: detected capacity change from 16777216 to 0 [ 82.191814] watchdog: watchdog0: watchdog did not stop!


Hardware for Linux and BSD

GitHub