[ 0.000000] Linux version 5.15.0-107-generic (XXX@XXX) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #117-Ubuntu SMP Fri Apr 26 12:26:49 UTC 2024 (Ubuntu 5.15.0-107.117-generic 5.15.149) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-107-generic root=UUID=HASH_657-3E84-A7C5-9310-A2B8B464F2C5 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-V EVO/USB3, BIOS 1601 09/08/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3214.535 MHz processor [ 0.004900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.010904] AGP: No AGP bridge found [ 0.010962] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.012541] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.012695] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.012707] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.016667] found SMP MP-table at [mem 0x000ff780-0x000ff78f] Using GB pages for direct mapping [ 0.016957] RAMDISK: [mem 0x2bd6f000-0x31eaefff] ACPI: Early table checksum verification disabled [ 0.016967] ACPI: RSDP 0x00000000000FBB90 000024 (v02 ACPIAM) [ 0.016972] ACPI: XSDT 0x00000000CFF90100 00005C (v01 090810 XSDT1652 20100908 MSFT 00000097) [ 0.016978] ACPI: FACP 0x00000000CFF90290 0000F4 (v03 090810 FACP1652 20100908 MSFT 00000097) [ 0.016984] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564) [ 0.016989] ACPI: DSDT 0x00000000CFF90450 00F17C (v01 A1638 A1638001 00000001 INTL 20060113) [ 0.016994] ACPI: FACS 0x00000000CFFA8000 000040 [ 0.016997] ACPI: FACS 0x00000000CFFA8000 000040 [ 0.017000] ACPI: APIC 0x00000000CFF90390 00007C (v01 090810 APIC1652 20100908 MSFT 00000097) [ 0.017004] ACPI: MCFG 0x00000000CFF90410 00003C (v01 090810 OEMMCFG 20100908 MSFT 00000097) [ 0.017008] ACPI: OEMB 0x00000000CFFA8040 000072 (v01 090810 OEMB1652 20100908 MSFT 00000097) [ 0.017011] ACPI: SRAT 0x00000000CFF9F8A0 0000C8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.017015] ACPI: HPET 0x00000000CFF9F970 000038 (v01 090810 OEMHPET 20100908 MSFT 00000097) [ 0.017019] ACPI: SSDT 0x00000000CFF9F9B0 000458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.017022] ACPI: Reserving FACP table memory at [mem 0xcff90290-0xcff90383] ACPI: Reserving DSDT table memory at [mem 0xcff90450-0xcff9f5cb] ACPI: Reserving FACS table memory at [mem 0xcffa8000-0xcffa803f] ACPI: Reserving FACS table memory at [mem 0xcffa8000-0xcffa803f] ACPI: Reserving APIC table memory at [mem 0xcff90390-0xcff9040b] ACPI: Reserving MCFG table memory at [mem 0xcff90410-0xcff9044b] ACPI: Reserving OEMB table memory at [mem 0xcffa8040-0xcffa80b1] ACPI: Reserving SRAT table memory at [mem 0xcff9f8a0-0xcff9f967] ACPI: Reserving HPET table memory at [mem 0xcff9f970-0xcff9f9a7] ACPI: Reserving SSDT table memory at [mem 0xcff9f9b0-0xcff9fe07] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.017106] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.017109] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff] NODE_DATA(0) allocated [mem 0x21ffd4000-0x21fffdfff] Zone ranges: [ 0.017599] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021fffffff] Device empty [ 0.017606] Movable zone start for each node [ 0.017610] Early memory node ranges [ 0.017610] node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x00000000cff8ffff] node 0: [mem 0x0000000100000000-0x000000021fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017669] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.053909] On node 0, zone Normal: 112 pages in unavailable ranges [ 0.054114] ACPI: PM-Timer IO Port: 0x808 [ 0.054130] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.054133] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.054136] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.054140] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.054141] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.054146] smpboot: Allowing 6 CPUs, 4 hotplug CPUs [ 0.054163] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e1fff] PM: hibernation: Registered nosave memory: [mem 0x000e2000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xcff90000-0xcffa7fff] PM: hibernation: Registered nosave memory: [mem 0xcffa8000-0xcffcffff] PM: hibernation: Registered nosave memory: [mem 0xcffd0000-0xcfffffff] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xff9fffff] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff] [mem 0xd0000000-0xff9fffff] available for PCI devices [ 0.054178] Booting paravirtualized kernel on bare hardware [ 0.054181] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.054191] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.055037] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.055045] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.055048] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.055088] Built 1 zonelists, mobility grouping on. Total pages: 1999505 [ 0.055090] Policy zone: Normal [ 0.055092] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-107-generic root=UUID=HASH_657-3E84-A7C5-9310-A2B8B464F2C5 ro quiet splash vt.handoff=7 [ 0.055191] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-107-generic", will be passed to user space. [ 0.057510] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.058690] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.058755] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.096182] AGP: Checking aperture... [ 0.102174] AGP: No AGP bridge found [ 0.102175] AGP: Node 0: aperture [bus addr 0x419a000000-0x419bffffff] (32MB) [ 0.102178] Aperture beyond 4GB. Ignoring. [ 0.102179] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.102179] AGP: Please enable the IOMMU option in the BIOS setup [ 0.102180] AGP: This costs you 64MB of RAM [ 0.102184] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.102187] PM: hibernation: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] Memory: 7694896K/8125620K available (16393K kernel code, 4395K rwdata, 10944K rodata, 3356K init, 18712K bss, 430464K reserved, 0K cma-reserved) [ 0.146918] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.146964] ftrace: allocating 50710 entries in 199 pages [ 0.164879] ftrace: allocated 199 pages with 5 groups [ 0.165109] rcu: Hierarchical RCU implementation. [ 0.165110] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.165112] Rude variant of Tasks RCU enabled. [ 0.165113] Tracing variant of Tasks RCU enabled. [ 0.165114] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.165115] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.170617] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16 [ 0.170972] spurious 8259A interrupt: IRQ7. [ 0.170990] Console: colour dummy device 80x25 [ 0.171005] printk: console [tty0] enabled [ 0.171036] ACPI: Core revision 20210730 [ 0.171156] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.171172] APIC: Switch to symmetric I/O mode setup [ 0.171588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.191171] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e55ec4849f, max_idle_ns: 440795226063 ns [ 0.191178] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.07 BogoMIPS (lpj=12858140) [ 0.191199] LVT offset 0 assigned for vector 0xf9 [ 0.191203] process: using AMD E400 aware idle routine [ 0.191204] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.191206] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.191210] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.191212] Spectre V2 : Mitigation: Retpolines [ 0.191213] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.191214] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.191219] x86/fpu: x87 FPU will use FXSAVE [ 0.206073] Freeing SMP alternatives memory: 44K [ 0.206079] pid_max: default: 32768 minimum: 301 [ 0.206153] LSM: Security Framework initializing [ 0.206172] landlock: Up and running. [ 0.206173] Yama: becoming mindful. [ 0.206223] AppArmor: AppArmor initialized [ 0.206315] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.206351] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.207177] process: System has AMD C1E enabled [ 0.317374] process: Switch to broadcast mode on CPU0 [ 0.317380] smpboot: CPU0: AMD Phenom(tm) II X2 555 Processor (family: 0x10, model: 0x4, stepping: 0x3) [ 0.317613] Performance Events: AMD PMU driver. [ 0.317618] ... version: 0 [ 0.317619] ... bit width: 48 [ 0.317620] ... generic registers: 4 [ 0.317620] ... value mask: 0000ffffffffffff [ 0.317621] ... max period: 00007fffffffffff [ 0.317622] ... fixed-purpose events: 0 [ 0.317623] ... event mask: 000000000000000f [ 0.317685] signal: max sigframe size: 1440 [ 0.317715] rcu: Hierarchical SRCU implementation. [ 0.318255] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.318369] smp: Bringing up secondary CPUs ... [ 0.318535] x86: Booting SMP configuration: [ 0.318536] .... node #0, CPUs: #1 [ 0.004236] process: Switch to broadcast mode on CPU1 [ 0.319249] smp: Brought up 1 node, 2 CPUs [ 0.319249] smpboot: Max logical packages: 3 [ 0.319249] smpboot: Total of 2 processors activated (12858.14 BogoMIPS) [ 0.321911] devtmpfs: initialized [ 0.321911] x86/mm: Memory block size: 128MB [ 0.321911] ACPI: PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffcffff] (163840 bytes) [ 0.321911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.321911] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.323245] pinctrl core: initialized pinctrl subsystem [ 0.323361] PM: RTC time: 00:06:58, date: 2024-10-23 [ 0.323574] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.323843] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.324015] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.324178] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.324229] thermal_sys: Registered thermal governor 'fair_share' [ 0.324229] thermal_sys: Registered thermal governor 'bang_bang' [ 0.324229] thermal_sys: Registered thermal governor 'step_wise' [ 0.324229] thermal_sys: Registered thermal governor 'user_space' [ 0.324229] thermal_sys: Registered thermal governor 'power_allocator' [ 0.324229] EISA bus registered [ 0.324229] cpuidle: using governor ladder [ 0.324229] cpuidle: using governor menu [ 0.324229] node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M [ 0.324229] Fam 10h mmconf [mem 0xe0000000-0xefffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe7fffff] node 0 link 0: mmio [fe800000, fe9fffff] node 0 link 0: mmio [fea00000, ffdfffff] TOM2: 0000000230000000 aka 8960M [ 0.324229] bus: [bus 00-07] on node 0 link 0 [ 0.324229] bus: 00 [io 0x0000-0xffff] bus: 00 [mem 0x000a0000-0x000bffff] bus: 00 [mem 0xd0000000-0xdfffffff] bus: 00 [mem 0xf0000000-0xffffffff] bus: 00 [mem 0x230000000-0xfcffffffff] ACPI: bus type PCI registered [ 0.324229] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.324229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.324229] PCI: not using MMCONFIG [ 0.324229] PCI: Using configuration type 1 for base access [ 0.324229] PCI: Using configuration type 1 for extended access [ 0.324229] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.324229] mtrr: probably your BIOS does not setup all CPUs. [ 0.324229] mtrr: corrected configuration. [ 0.324963] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.324994] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.324994] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.327293] ACPI: Added _OSI(Module Device) [ 0.327296] ACPI: Added _OSI(Processor Device) [ 0.327297] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.327298] ACPI: Added _OSI(Processor Aggregator Device) [ 0.327299] ACPI: Added _OSI(Linux-Dell-Video) [ 0.327300] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.327301] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.339085] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.663644] ACPI: EC: EC started [ 0.663647] ACPI: EC: interrupt blocked [ 0.663727] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.663730] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.663732] ACPI: Interpreter enabled [ 0.663753] ACPI: PM: (supports S0 S1 S3 S4 S5) [ 0.663754] ACPI: Using IOAPIC for interrupt routing [ 0.663786] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.665615] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.665634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.665635] PCI: Using E820 reservations for host bridge windows [ 0.666004] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.674166] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.674174] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] PCI host bridge to bus 0000:00 [ 0.674915] pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.675209] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400 [ 0.675381] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.675397] pci 0000:00:09.0: enabling Extended Tags [ 0.675420] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.675572] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.675588] pci 0000:00:0a.0: enabling Extended Tags [ 0.675609] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.675771] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.675784] pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007] pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003] pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007] pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003] pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f] pci 0000:00:11.0: reg 0x24: [mem 0xfe7ffc00-0xfe7fffff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.676003] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.676016] pci 0000:00:12.0: reg 0x10: [mem 0xfe7fe000-0xfe7fefff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.676220] pci 0000:00:12.2: reg 0x10: [mem 0xfe7ff800-0xfe7ff8ff] pci 0000:00:12.2: supports D1 D2 [ 0.676280] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.676440] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.676453] pci 0000:00:13.0: reg 0x10: [mem 0xfe7fd000-0xfe7fdfff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.676653] pci 0000:00:13.2: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff] pci 0000:00:13.2: supports D1 D2 [ 0.676713] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.676866] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.677060] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.677074] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.677290] pci 0000:00:14.2: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.677485] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.677679] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.677851] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.677864] pci 0000:00:14.5: reg 0x10: [mem 0xfe7fc000-0xfe7fcfff] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.678088] pci 0000:00:15.0: enabling Extended Tags [ 0.678122] pci 0000:00:15.0: supports D1 D2 [ 0.678282] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.678312] pci 0000:00:15.1: enabling Extended Tags [ 0.678346] pci 0000:00:15.1: supports D1 D2 [ 0.678510] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.678524] pci 0000:00:16.0: reg 0x10: [mem 0xfe7f7000-0xfe7f7fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.678729] pci 0000:00:16.2: reg 0x10: [mem 0xfe7ff000-0xfe7ff0ff] pci 0000:00:16.2: supports D1 D2 [ 0.678789] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.678903] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.679028] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.679150] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.679276] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.679414] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.679506] pci_bus 0000:01: extended config space not accessible [ 0.679541] pci 0000:01:05.0: [1002:9715] type 00 class 0x030000 [ 0.679548] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff] pci 0000:01:05.0: reg 0x18: [mem 0xfe9f0000-0xfe9fffff] pci 0000:01:05.0: reg 0x24: [mem 0xfe800000-0xfe8fffff] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:05.0: supports D1 D2 [ 0.679641] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 0.679647] pci 0000:01:05.1: reg 0x10: [mem 0xfe9e8000-0xfe9ebfff] pci 0000:01:05.1: supports D1 D2 [ 0.679734] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.679839] pci 0000:02:00.0: reg 0x10: [mem 0xfeaff800-0xfeafffff 64bit] pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd8ff] pci 0000:02:00.0: supports D2 [ 0.679992] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold [ 0.680131] pci 0000:02:00.1: [1106:0415] type 00 class 0x010185 [ 0.680159] pci 0000:02:00.1: reg 0x10: [io 0xdc00-0xdc07] pci 0000:02:00.1: reg 0x14: [io 0xd480-0xd483] pci 0000:02:00.1: reg 0x18: [io 0xd400-0xd407] pci 0000:02:00.1: reg 0x1c: [io 0xd080-0xd083] pci 0000:02:00.1: reg 0x20: [io 0xd000-0xd00f] pci 0000:02:00.1: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref] pci 0000:02:00.1: supports D2 [ 0.680333] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold [ 0.691217] pci 0000:00:09.0: PCI bridge to [bus 02] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.691290] pci 0000:03:00.0: reg 0x10: [mem 0xfebfa000-0xfebfbfff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.691460] pci 0000:00:0a.0: PCI bridge to [bus 03] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] pci_bus 0000:04: extended config space not accessible [ 0.691525] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.691532] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.691534] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.691535] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.691537] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.691539] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode) [ 0.691540] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.691572] pci 0000:00:15.0: PCI bridge to [bus 05] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 0.691670] pci 0000:06:00.0: reg 0x10: [io 0xe800-0xe8ff] pci 0000:06:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref] pci 0000:06:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref] pci 0000:06:00.0: supports D1 D2 [ 0.691804] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.703202] pci 0000:00:15.1: PCI bridge to [bus 06] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] ACPI: PCI: Interrupt link LNKA configured for IRQ 5 [ 0.704181] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.704258] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.704335] ACPI: PCI: Interrupt link LNKD configured for IRQ 9 [ 0.704399] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.704449] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.704498] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.704548] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.704661] ACPI: EC: interrupt unblocked [ 0.704662] ACPI: EC: event unblocked [ 0.704666] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.704667] ACPI: EC: GPE=0xa [ 0.704669] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.704671] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.704728] iommu: Default domain type: Translated [ 0.704728] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.704728] SCSI subsystem initialized [ 0.704728] libata version 3.00 loaded. [ 0.704728] pci 0000:01:05.0: vgaarb: setting as boot VGA device [ 0.704728] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.704728] pci 0000:01:05.0: vgaarb: bridge control possible [ 0.704728] vgaarb: loaded [ 0.704728] ACPI: bus type USB registered [ 0.704728] usbcore: registered new interface driver usbfs [ 0.704728] usbcore: registered new interface driver hub [ 0.704728] usbcore: registered new device driver usb [ 0.704728] pps_core: LinuxPPS API ver. 1 registered [ 0.704728] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.704728] PTP clock support registered [ 0.704728] EDAC MC: Ver: 3.0.0 [ 0.704728] NetLabel: Initializing [ 0.704728] NetLabel: domain hash size = 128 [ 0.704728] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.704728] NetLabel: unlabeled traffic allowed by default [ 0.704728] PCI: Using ACPI for IRQ routing [ 0.711712] PCI: pci_cache_line_size set to 64 bytes [ 0.711765] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.711777] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.713317] clocksource: Switched to clocksource tsc-early [ 0.727189] VFS: Disk quotas dquot_6.6.0 [ 0.727213] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727381] AppArmor: AppArmor Filesystem Enabled [ 0.727409] pnp: PnP ACPI init [ 0.728464] pnp 00:02: [dma 0 disabled] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.728674] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.728925] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.728927] system 00:04: [io 0x040b] has been reserved [ 0.728929] system 00:04: [io 0x04d6] has been reserved [ 0.728930] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.728932] system 00:04: [io 0x0c14] has been reserved [ 0.728934] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.728935] system 00:04: [io 0x0c52] has been reserved [ 0.728937] system 00:04: [io 0x0c6c] has been reserved [ 0.728938] system 00:04: [io 0x0c6f] has been reserved [ 0.728940] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.728941] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.728943] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.728945] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.728946] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.728948] system 00:04: [io 0x0b00-0x0b3f] has been reserved [ 0.728950] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.728951] system 00:04: [io 0x0b00-0x0b1f] has been reserved [ 0.728957] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.728958] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.728960] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.728962] system 00:04: [io 0xfe00-0xfefe] has been reserved [ 0.728964] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.728966] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.728968] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.729181] system 00:05: [io 0x0230-0x023f] has been reserved [ 0.729183] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.729185] system 00:05: [io 0x0300-0x030f] has been reserved [ 0.729187] system 00:05: [io 0x0a30-0x0a3f] has been reserved [ 0.729255] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.729388] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x000c0000-0x000dffff] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.729407] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.729409] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.729411] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.729522] pnp: PnP ACPI: found 8 devices [ 0.735375] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.735460] NET: Registered PF_INET protocol family [ 0.735789] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736861] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736945] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.737087] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.737479] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.737639] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737793] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.737854] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737917] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737991] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.737997] NET: Registered PF_XDP protocol family [ 0.738018] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:09.0: PCI bridge to [bus 02] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:0a.0: PCI bridge to [bus 03] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:14.4: PCI bridge to [bus 04] pci 0000:00:15.0: PCI bridge to [bus 05] pci 0000:00:15.1: PCI bridge to [bus 06] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff window] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.500471] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x160 took 744415 usecs [ 1.524466] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x160 took 23244 usecs [ 1.548462] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x160 took 23246 usecs [ 1.572474] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x160 took 23435 usecs [ 1.572684] pci 0000:01:05.1: D0 power state depends on 0000:01:05.0 [ 1.580273] PCI: CLS 64 bytes, default 64 [ 1.580391] Trying to unpack rootfs image as initramfs... [ 1.580807] PCI-DMA: Disabling AGP. [ 1.580897] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.580899] PCI-DMA: using GART IOMMU. [ 1.580900] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.581829] software IO TLB: tearing down default memory pool [ 1.583114] LVT offset 1 assigned for vector 0x400 [ 1.583125] LVT offset 1 assigned [ 1.583168] perf: AMD IBS detected (0x0000001f) [ 1.583570] Initialise system trusted keyrings [ 1.583585] Key type blacklist registered [ 1.583802] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.585285] zbud: loaded [ 1.585626] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.585833] fuse: init (API version 7.34) [ 1.586000] integrity: Platform Keyring initialized [ 1.595863] Key type asymmetric registered [ 1.595865] Asymmetric key parser 'x509' registered [ 1.595889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.600392] io scheduler mq-deadline registered [ 1.601177] pcieport 0000:00:09.0: PME: Signaling with IRQ 24 [ 1.601279] pcieport 0000:00:0a.0: PME: Signaling with IRQ 25 [ 1.601490] pcieport 0000:00:15.0: PME: Signaling with IRQ 26 [ 1.601667] pcieport 0000:00:15.1: PME: Signaling with IRQ 27 [ 1.602045] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.602193] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.602217] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.602289] ACPI: button: Power Button [PWRF] ACPI: processor limited to max C-state 1 [ 1.603274] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.623725] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.625694] Linux agpgart interface v0.103 [ 1.627771] loop: module loaded [ 1.628365] tun: Universal TUN/TAP device driver, 1.6 [ 1.628394] PPP generic driver version 2.4.2 [ 1.628440] VFIO - User Level meta-driver version: 0.3 [ 1.628617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.628621] ehci-pci: EHCI PCI platform driver [ 1.628769] QUIRK: Enable AMD PLL fix [ 1.628795] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.628804] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.628810] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.628818] ehci-pci 0000:00:12.2: debug port 1 [ 1.628869] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe7ff800 [ 1.644368] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.644520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.644523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.644525] usb usb1: Product: EHCI Host Controller [ 1.644526] usb usb1: Manufacturer: Linux 5.15.0-107-generic ehci_hcd [ 1.644528] usb usb1: SerialNumber: ... [ 1.644644] hub 1-0:1.0: USB hub found [ 1.644652] hub 1-0:1.0: 5 ports detected [ 1.644995] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.645001] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.645006] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.645014] ehci-pci 0000:00:13.2: debug port 1 [ 1.645044] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe7ff400 [ 1.660358] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.660453] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.660456] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.660458] usb usb2: Product: EHCI Host Controller [ 1.660459] usb usb2: Manufacturer: Linux 5.15.0-107-generic ehci_hcd [ 1.660461] usb usb2: SerialNumber: ... [ 1.660578] hub 2-0:1.0: USB hub found [ 1.660585] hub 2-0:1.0: 5 ports detected [ 1.660909] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.660914] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.660918] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.660926] ehci-pci 0000:00:16.2: debug port 1 [ 1.660957] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe7ff000 [ 1.676350] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.676409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.676411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.676413] usb usb3: Product: EHCI Host Controller [ 1.676414] usb usb3: Manufacturer: Linux 5.15.0-107-generic ehci_hcd [ 1.676415] usb usb3: SerialNumber: ... [ 1.676534] hub 3-0:1.0: USB hub found [ 1.676541] hub 3-0:1.0: 4 ports detected [ 1.676692] ehci-platform: EHCI generic platform driver [ 1.676708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.676716] ohci-pci: OHCI PCI platform driver [ 1.676896] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.676902] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.676939] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe7fe000 [ 1.740387] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.740393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.740395] usb usb4: Product: OHCI PCI host controller [ 1.740397] usb usb4: Manufacturer: Linux 5.15.0-107-generic ohci_hcd [ 1.740398] usb usb4: SerialNumber: ... [ 1.740528] hub 4-0:1.0: USB hub found [ 1.740537] hub 4-0:1.0: 5 ports detected [ 1.740849] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.740855] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.740887] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe7fd000 [ 1.804389] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.804396] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.804397] usb usb5: Product: OHCI PCI host controller [ 1.804399] usb usb5: Manufacturer: Linux 5.15.0-107-generic ohci_hcd [ 1.804400] usb usb5: SerialNumber: ... [ 1.804512] hub 5-0:1.0: USB hub found [ 1.804521] hub 5-0:1.0: 5 ports detected [ 1.804850] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.804857] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.804896] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe7fc000 [ 1.868370] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.868376] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.868378] usb usb6: Product: OHCI PCI host controller [ 1.868379] usb usb6: Manufacturer: Linux 5.15.0-107-generic ohci_hcd [ 1.868381] usb usb6: SerialNumber: ... [ 1.868514] hub 6-0:1.0: USB hub found [ 1.868522] hub 6-0:1.0: 2 ports detected [ 1.868870] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.868877] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.868907] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe7f7000 [ 1.932367] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.932374] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.932376] usb usb7: Product: OHCI PCI host controller [ 1.932377] usb usb7: Manufacturer: Linux 5.15.0-107-generic ohci_hcd [ 1.932378] usb usb7: SerialNumber: ... [ 1.932495] hub 7-0:1.0: USB hub found [ 1.932503] hub 7-0:1.0: 4 ports detected [ 1.932653] ohci-platform: OHCI generic platform driver [ 1.932669] uhci_hcd: USB Universal Host Controller Interface driver [ 1.932755] i8042: PNP: No PS/2 controller found. [ 1.932756] i8042: Probing ports directly. [ 1.933090] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.933095] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.933159] mousedev: PS/2 mouse device common for all mice [ 1.933247] rtc_cmos 00:01: RTC can wake from S4 [ 1.933410] rtc_cmos 00:01: registered as rtc0 [ 1.933432] rtc_cmos 00:01: setting system clock to 2024-10-23T00:07:00 UTC (1729642020) [ 1.933468] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.933477] i2c_dev: i2c /dev entries driver [ 1.933499] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.933543] device-mapper: uevent: version 1.0.3 [ 1.933597] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 1.933614] platform eisa.0: Probing EISA bus 0 [ 1.933616] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.933618] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.933619] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.933621] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.933622] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.933623] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.933625] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.933626] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.933627] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.933628] platform eisa.0: EISA: Detected 0 cards [ 1.933885] ledtrig-cpu: registered to indicate activity on CPUs [ 1.933921] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.933922] vesafb: scrolling: redraw [ 1.933923] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.933948] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5824k, total 5824k [ 1.933989] fbcon: Deferring console take-over [ 1.933990] fb0: VESA VGA frame buffer device [ 1.934060] drop_monitor: Initializing network drop monitor service [ 1.934250] NET: Registered PF_INET6 protocol family [ 1.980320] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 2.153671] usb 1-2: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 2.153678] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.153680] usb 1-2: Product: 802.11 n WLAN [ 2.153681] usb 1-2: Manufacturer: Ralink [ 2.153682] usb 1-2: SerialNumber: ... [ 2.320305] usb 5-2: new full-speed USB device number 2 using ohci-pci [ 2.473725] Freeing initrd memory: 99584K [ 2.480091] Segment Routing with IPv6 [ 2.480109] In-situ OAM (IOAM) with IPv6 [ 2.480138] NET: Registered PF_PACKET protocol family [ 2.480193] Key type dns_resolver registered [ 2.480501] microcode: CPU0: patch_level=0x010000b6 [ 2.480506] microcode: CPU1: patch_level=0x010000b6 [ 2.480511] microcode: Microcode Update Driver: v2.2. [ 2.480516] IPI shorthand broadcast: enabled [ 2.480534] sched_clock: Marking stable (2480160638, 236949)->(2669327477, -188929890) [ 2.480651] registered taskstats version 1 [ 2.480713] Loading compiled-in X.509 certificates [ 2.481687] Loaded X.509 cert 'Build time autogenerated kernel key: 51c8d42d691c9bd960c7b21eb177ba4d2ddc4d38' [ 2.482562] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 2.483429] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 2.483431] blacklist: Loading compiled-in revocation X.509 certificates [ 2.483452] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 2.483471] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 2.483502] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 2.483525] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 2.483547] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 2.483565] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 2.483586] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 2.483604] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 2.484083] zswap: loaded using pool lzo/zbud [ 2.484272] tsc: Refined TSC clocksource calibration: 3214.326 MHz [ 2.484277] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e552735450, max_idle_ns: 440795275644 ns [ 2.484290] clocksource: Switched to clocksource tsc [ 2.484331] Key type .fscrypt registered [ 2.484332] Key type fscrypt-provisioning registered [ 2.487439] Key type encrypted registered [ 2.487445] AppArmor: AppArmor sha1 policy hashing enabled [ 2.487455] ima: No TPM chip found, activating TPM-bypass! [ 2.487465] Loading compiled-in module X.509 certificates [ 2.488354] Loaded X.509 cert 'Build time autogenerated kernel key: 51c8d42d691c9bd960c7b21eb177ba4d2ddc4d38' [ 2.488356] ima: Allocated hash algorithm: sha1 [ 2.488363] ima: No architecture policies found [ 2.488372] evm: Initialising EVM extended attributes: [ 2.488373] evm: security.selinux [ 2.488374] evm: security.SMACK64 [ 2.488375] evm: security.SMACK64EXEC [ 2.488376] evm: security.SMACK64TRANSMUTE [ 2.488376] evm: security.SMACK64MMAP [ 2.488377] evm: security.apparmor [ 2.488378] evm: security.ima [ 2.488378] evm: security.capability [ 2.488379] evm: HMAC attrs: 0x1 [ 2.488678] PM: Magic number: 12:813:102 [ 2.488905] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.489205] RAS: Correctable Errors collector initialized. [ 2.491587] Freeing unused decrypted memory: 2036K [ 2.492818] Freeing unused kernel image (initmem) memory: 3356K [ 2.515513] usb 5-2: New USB device found, idVendor=0458, idProduct=6001, bcdDevice=10.01 [ 2.515518] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.515520] usb 5-2: Product: Wireless Device [ 2.515522] usb 5-2: Manufacturer: Genius [ 2.520281] Write protecting the kernel read-only data: 30720k [ 2.521104] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.521582] Freeing unused kernel image (rodata/data gap) memory: 1344K [ 2.568821] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.568827] Run /init as init process [ 2.568828] with arguments: [ 2.568829] /init [ 2.568830] splash [ 2.568831] with environment: [ 2.568832] HOME=/ [ 2.568833] TERM=linux [ 2.568833] BOOT_IMAGE=/boot/vmlinuz-5.15.0-107-generic [ 2.708584] pata_via 0000:02:00.1: version 0.3.4 [ 2.711241] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20210730/utaddress-204) [ 2.711250] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 2.714151] ahci 0000:00:11.0: version 3.0 [ 2.714361] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.714365] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.716107] scsi host0: pata_via [ 2.716594] scsi host1: ahci [ 2.719772] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.719783] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 2.719879] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 2.720081] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.720084] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 2.720087] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.723333] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.723336] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.723337] usb usb8: Product: xHCI Host Controller [ 2.723339] usb usb8: Manufacturer: Linux 5.15.0-107-generic xhci-hcd [ 2.723340] usb usb8: SerialNumber: ... [ 2.724838] hub 8-0:1.0: USB hub found [ 2.724850] hub 8-0:1.0: 2 ports detected [ 2.724960] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.724980] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.724983] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.724985] usb usb9: Product: xHCI Host Controller [ 2.724986] usb usb9: Manufacturer: Linux 5.15.0-107-generic xhci-hcd [ 2.724987] usb usb9: SerialNumber: ... [ 2.725056] hub 9-0:1.0: USB hub found [ 2.725067] hub 9-0:1.0: 2 ports detected [ 2.730158] scsi host3: ahci [ 2.730284] scsi host2: pata_via [ 2.730338] ata1: PATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 17 [ 2.730341] ata2: PATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 17 [ 2.731357] scsi host4: pata_atiixp [ 2.734399] scsi host5: ahci [ 2.737914] scsi host6: pata_atiixp [ 2.737953] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.737955] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.738091] scsi host7: ahci [ 2.738142] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 19 [ 2.738145] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 19 [ 2.738147] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 19 [ 2.738149] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 19 [ 2.751351] hid: raw HID events driver (C) Jiri Kosina [ 2.754454] r8169 0000:06:00.0 eth0: RTL8168e/8111e, 1CFB4CA294D2CB6C785A7D3B38C23779, XID 2c2, IRQ 31 [ 2.754460] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] ata7.01: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133 [ 2.925733] ata7.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.928313] ata7.01: limited to UDMA/33 due to 40-wire cable [ 3.051352] ata6: SATA link down (SStatus 0 SControl 300) [ 3.051394] ata3: SATA link down (SStatus 0 SControl 300) [ 3.051432] ata4: SATA link down (SStatus 0 SControl 300) [ 3.060857] scsi 4:0:1:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.061486] scsi 4:0:1:0: Attached scsi generic sg0 type 0 [ 3.062114] sd 4:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.062150] sd 4:0:1:0: [sda] Write Protect is off [ 3.062158] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 3.062212] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.064249] sda: sda1 [ 3.064479] sd 4:0:1:0: [sda] Attached SCSI disk [ 3.212318] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.212451] ata5.00: ATA-10: HKVSN HS-SSD-C100/120G, V4.7, max UDMA/133 [ 3.212551] ata5.00: NCQ Send/Recv Log not supported [ 3.212557] ata5.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.212785] ata5.00: NCQ Send/Recv Log not supported [ 3.212794] ata5.00: configured for UDMA/133 [ 3.212969] scsi 5:0:0:0: Direct-Access ATA HKVSN HS-SSD-C10 V4.7 PQ: 0 ANSI: 5 [ 3.213299] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.213308] sd 5:0:0:0: [sdb] Write Protect is off [ 3.213310] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.213323] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.213586] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 3.215756] sdb: [ 3.215882] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.230875] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 3.235173] usbcore: registered new interface driver usbhid [ 3.235182] usbhid: USB HID core driver [ 3.237073] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:0458:6001.0001/input/input7 [ 3.237376] hid-generic 0003:0458:6001.0001: input,hidraw0: USB HID v1.01 Mouse [Genius Wireless Device] on usb-0000:00:13.0-2/input0 [ 3.237683] input: Genius Wireless Device System Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0002/input/input8 [ 3.290855] [drm] radeon kernel modesetting enabled. [ 3.291085] radeon 0000:01:05.0: vgaarb: deactivate vga console [ 3.291284] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E 0x00). [ 3.291315] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] caller pci_map_rom+0x7f/0x1f0 mapping multiple BARs [ 3.292386] ATOM BIOS: 113 [ 3.292399] radeon 0000:01:05.0: VRAM: 384M 0x00000000C0000000 - 0x00000000D7FFFFFF (384M used) [ 3.292402] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 3.292407] [drm] Detected VRAM RAM=384M, BAR=256M [ 3.292408] [drm] RAM width 32bits DDR [ 3.292429] [drm] radeon: 384M of VRAM memory ready [ 3.292430] [drm] radeon: 512M of GTT memory ready. [ 3.292440] [drm] Loading RS780 Microcode [ 3.292515] [drm] radeon: power management initialized [ 3.292575] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.296426] input: Genius Wireless Device Consumer Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0002/input/input9 [ 3.296500] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0002/input/input10 [ 3.296628] hid-generic 0003:0458:6001.0002: input,hiddev0,hidraw1: USB HID v1.01 Device [Genius Wireless Device] on usb-0000:00:13.0-2/input1 [ 3.296935] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.2/0003:0458:6001.0003/input/input11 [ 3.309343] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000). [ 3.309393] radeon 0000:01:05.0: WB enabled [ 3.309396] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 [ 3.311560] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 [ 3.311665] radeon 0000:01:05.0: radeon: MSI limited to 32-bit [ 3.311679] [drm] radeon: irq initialized. [ 3.343697] firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 3.343715] [drm] ring test on 0 succeeded in 1 usecs [ 3.356533] hid-generic 0003:0458:6001.0003: input,hidraw2: USB HID v1.01 Keyboard [Genius Wireless Device] on usb-0000:00:13.0-2/input2 [ 4.510523] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 4.510630] fbcon: Taking over console [ 5.522649] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 6.534734] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 7.546815] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8.558895] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 9.570978] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 10.583060] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 11.595144] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 12.607223] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 13.619303] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 13.639213] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!! [ 13.639280] radeon 0000:01:05.0: failed initializing UVD (-1). [ 13.639595] [drm] ib test on ring 0 succeeded in 0 usecs [ 13.640557] [drm] Radeon Display Connectors [ 13.640559] [drm] Connector 0: [ 13.640560] [drm] VGA-1 [ 13.640561] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 13.640563] [drm] Encoders: [ 13.640563] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.640564] [drm] Connector 1: [ 13.640565] [drm] HDMI-A-1 [ 13.640565] [drm] HPD3 [ 13.640566] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 13.640568] [drm] Encoders: [ 13.640568] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 13.729806] [drm] fb mappable at 0xD0247000 [ 13.729809] [drm] vram apper at 0xD0000000 [ 13.729809] [drm] size 8294400 [ 13.729810] [drm] fb depth is 24 [ 13.729811] [drm] pitch is 7680 [ 13.729862] fbcon: radeondrmfb (fb0) is primary device [ 13.764319] Console: switching to colour frame buffer device 240x67 [ 13.781391] radeon 0000:01:05.0: [drm] fb0: radeondrmfb frame buffer device [ 13.796386] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0 [ 14.068246] raid6: sse2x4 gen() 9039 MB/s [ 14.136253] raid6: sse2x4 xor() 1936 MB/s [ 14.204246] raid6: sse2x2 gen() 9036 MB/s [ 14.272241] raid6: sse2x2 xor() 7538 MB/s [ 14.340246] raid6: sse2x1 gen() 7386 MB/s [ 14.408239] raid6: sse2x1 xor() 4922 MB/s [ 14.408244] raid6: using algorithm sse2x4 gen() 9039 MB/s [ 14.408245] raid6: .... xor() 1936 MB/s, rmw enabled [ 14.408247] raid6: using intx1 recovery algorithm [ 14.408394] firewire_core 0000:02:00.0: created device fw0: GUID 001e8c00002faf77, S400 [ 14.409974] xor: measuring software checksum speed [ 14.410858] prefetch64-sse : 11330 MB/sec [ 14.411747] generic_sse : 11078 MB/sec [ 14.411748] xor: using function: prefetch64-sse (11330 MB/sec) [ 14.412901] async_tx: api initialized (async) [ 14.500976] random: [pango] FcInit: uninitialized urandom read (8 bytes read) [ 14.501528] random: [pango] FcInit: uninitialized urandom read (8 bytes read) [ 14.640507] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 15.480259] random: crng init done [ 15.965711] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 16.883856] EXT4-fs (sda1): re-mounted. Opts: (null). Quota mode: none. [ 16.921445] lp: driver loaded but no devices found [ 16.954086] ppdev: user-space parallel port driver [ 17.231559] kvm: disabled by bios [ 17.492423] RPC: Registered named UNIX socket transport module. [ 17.492428] RPC: Registered udp transport module. [ 17.492429] RPC: Registered tcp transport module. [ 17.492430] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.838757] kvm: disabled by bios [ 18.946391] kvm: disabled by bios [ 18.988895] MCE: In-kernel MCE decoding enabled. [ 19.255434] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.304575] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.305254] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 19.617229] RTL8211DN Gigabit Ethernet r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC) [ 19.675940] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 19.676746] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input12 [ 19.704802] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 19.704810] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.704813] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 19.704815] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 19.704817] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 19.704818] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 19.704820] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 19.704821] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 19.704823] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 19.721132] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 19.721200] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 19.721253] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 19.721299] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 19.721349] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 19.721400] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 19.721448] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 19.721499] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 19.826058] loop0: detected capacity change from 0 to 8 [ 19.937083] r8169 0000:06:00.0 enp6s0: Link is Down [ 20.420263] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 20.590936] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 20.626057] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 20.626347] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.630629] usbcore: registered new interface driver rt2800usb [ 20.641691] rt2800usb 1-2:1.0 wlx00c0ca4af3c3: renamed from wlan0 [ 20.660711] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 20.661446] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 22.475435] wlx00c0ca4af3c3: authenticate with E8F21118F39FDCE9E5653BFE695BA618 [ 22.499818] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 22.505842] wlx00c0ca4af3c3: authenticated [ 22.508350] wlx00c0ca4af3c3: associate with E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 22.514194] wlx00c0ca4af3c3: RX AssocResp from E8F21118F39FDCE9E5653BFE695BA618 (capab=0x1431 status=0 aid=3) [ 22.521184] wlx00c0ca4af3c3: associated [ 22.580417] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0ca4af3c3: link becomes ready [ 23.048913] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 69.019752] loop0: detected capacity change from 0 to 8 [ 367.564569] [UFW BLOCK] IN=wlx00c0ca4af3c3 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:293C3E6230A78031012111A693C7E640 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=132 TOS=0x00 PREC=0x00 TTL=64 ID=57363 DF PROTO=UDP SPT=53 DPT=41591 LEN=112 [ 502.106458] loop0: detected capacity change from 0 to 8 [ 779.549141] loop0: detected capacity change from 0 to 8 [ 949.236328] loop0: detected capacity change from 0 to 8 [ 1156.209665] loop0: detected capacity change from 0 to 8 [ 1257.667835] loop0: detected capacity change from 0 to 8 [ 1353.217062] loop0: detected capacity change from 0 to 8 [ 3073.811363] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 3073.972251] usb 1-1: New USB device found, idVendor=0bda, idProduct=8812, bcdDevice= 0.00 [ 3073.972269] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3073.972277] usb 1-1: Product: 802.11n NIC [ 3073.972283] usb 1-1: Manufacturer: Realtek [ 3073.972288] usb 1-1: SerialNumber: ... [ 3074.112880] 88XXau: loading out-of-tree module taints kernel. [ 3074.114616] 88XXau: module verification failed: signature and/or required key missing - tainting kernel [ 3074.413092] usb 1-1: 88XXau EF49CE2845FA5A5CD1BDE395DAE68C77 hw_info[d7] usbcore: registered new interface driver rtl88XXau [ 3074.452127] rtl88XXau 1-1:1.0 wlx00c0ca8934cc: renamed from wlan0 [ 3075.266577] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0ca8934cc: link becomes ready [ 3079.147534] usb 1-2: USB disconnect, device number 2 [ 3079.163304] wlx00c0ca4af3c3: deauthenticating from E8F21118F39FDCE9E5653BFE695BA618 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3081.039307] usb 1-2: new high-speed USB device number 4 using ehci-pci [ 3081.212963] usb 1-2: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 3081.212980] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3081.212989] usb 1-2: Product: 802.11 n WLAN [ 3081.212995] usb 1-2: Manufacturer: Ralink [ 3081.213000] usb 1-2: SerialNumber: ... [ 3081.351339] usb 1-2: reset high-speed USB device number 4 using ehci-pci [ 3081.520020] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 3081.551143] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected [ 3081.551700] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 3081.595152] rt2800usb 1-2:1.0 wlx00c0ca4af3c3: renamed from wlan0 [ 3081.611099] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 3081.611153] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 3082.487712] usb 1-2: USB disconnect, device number 4 [ 3100.556412] usb 1-1: USB disconnect, device number 3 [ 3102.719134] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 3102.876028] usb 1-1: New USB device found, idVendor=0bda, idProduct=8812, bcdDevice= 0.00 [ 3102.876044] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3102.876052] usb 1-1: Product: 802.11n NIC [ 3102.876058] usb 1-1: Manufacturer: Realtek [ 3102.876063] usb 1-1: SerialNumber: ... [ 3103.175508] usb 1-1: 88XXau EF49CE2845FA5A5CD1BDE395DAE68C77 hw_info[d7] rtl88XXau 1-1:1.0 wlx00c0ca8934cc: renamed from wlan0 [ 3104.010187] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0ca8934cc: link becomes ready [ 3104.525815] usb 1-1: USB disconnect, device number 5 [ 3105.935107] usb 1-1: new high-speed USB device number 6 using ehci-pci [ 3106.091919] usb 1-1: New USB device found, idVendor=0bda, idProduct=8812, bcdDevice= 0.00 [ 3106.091935] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3106.091943] usb 1-1: Product: 802.11n NIC [ 3106.091949] usb 1-1: Manufacturer: Realtek [ 3106.091954] usb 1-1: SerialNumber: ... [ 3106.393273] usb 1-1: 88XXau EF49CE2845FA5A5CD1BDE395DAE68C77 hw_info[d7] rtl88XXau 1-1:1.0 wlx00c0ca8934cc: renamed from wlan0 [ 3107.230526] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0ca8934cc: link becomes ready [ 3154.096111] usb 5-2: USB disconnect, device number 2 [ 3154.802690] usb 5-2: new full-speed USB device number 3 using ohci-pci [ 3154.997798] usb 5-2: New USB device found, idVendor=0458, idProduct=6001, bcdDevice=10.01 [ 3154.997815] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3154.997823] usb 5-2: Product: Wireless Device [ 3154.997829] usb 5-2: Manufacturer: Genius [ 3155.004836] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:0458:6001.0004/input/input21 [ 3155.063337] hid-generic 0003:0458:6001.0004: input,hidraw0: USB HID v1.01 Mouse [Genius Wireless Device] on usb-0000:00:13.0-2/input0 [ 3155.069516] input: Genius Wireless Device System Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0005/input/input22 [ 3155.127016] input: Genius Wireless Device Consumer Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0005/input/input23 [ 3155.127937] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:0458:6001.0005/input/input24 [ 3155.132221] hid-generic 0003:0458:6001.0005: input,hiddev0,hidraw1: USB HID v1.01 Device [Genius Wireless Device] on usb-0000:00:13.0-2/input1 [ 3155.136642] input: Genius Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.2/0003:0458:6001.0006/input/input25 [ 3155.195480] hid-generic 0003:0458:6001.0006: input,hidraw2: USB HID v1.01 Keyboard [Genius Wireless Device] on usb-0000:00:13.0-2/input2 [ 3158.366647] usb 2-3: new high-speed USB device number 4 using ehci-pci [ 3158.794653] usb 2-3: device descriptor read/64, error -71 [ 3159.262646] usb 2-3: device descriptor read/64, error -71 [ 3159.774648] usb 2-3: new high-speed USB device number 5 using ehci-pci [ 3160.134638] usb 2-3: device descriptor read/64, error -71 [ 3160.802634] usb 2-3: device not accepting address 5, error -71 [ 3160.802688] usb usb2-port3: attempt power cycle [ 3161.454630] usb 2-3: new high-speed USB device number 6 using ehci-pci [ 3161.886626] usb 2-3: device not accepting address 6, error -71 [ 3164.306612] usb 2-3: new high-speed USB device number 8 using ehci-pci [ 3164.480370] usb 2-3: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01 [ 3164.480386] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3164.480395] usb 2-3: Product: 802.11 n WLAN [ 3164.480401] usb 2-3: Manufacturer: Ralink [ 3164.480406] usb 2-3: SerialNumber: ... [ 3164.618594] usb 2-3: reset high-speed USB device number 8 using ehci-pci [ 3164.785551] ieee80211 phy5: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 3164.814924] ieee80211 phy5: rt2x00_set_rf: Info - RF chipset 0005 detected [ 3164.815217] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht' [ 3164.853481] rt2800usb 2-3:1.0 wlx00c0ca4af3c3: renamed from wlan0 [ 3164.887155] ieee80211 phy5: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 3164.887193] ieee80211 phy5: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 3166.660876] wlx00c0ca4af3c3: authenticate with E8F21118F39FDCE9E5653BFE695BA618 [ 3166.685718] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 3166.790576] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 2/3) [ 3166.902564] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 3/3) [ 3167.006597] wlx00c0ca4af3c3: authentication with E8F21118F39FDCE9E5653BFE695BA618 timed out [ 3168.428692] wlx00c0ca4af3c3: authenticate with E8F21118F39FDCE9E5653BFE695BA618 [ 3168.474048] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 3168.586575] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 2/3) [ 3168.690593] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 3/3) [ 3168.794534] wlx00c0ca4af3c3: authentication with E8F21118F39FDCE9E5653BFE695BA618 timed out [ 3170.629915] wlx00c0ca4af3c3: authenticate with E8F21118F39FDCE9E5653BFE695BA618 [ 3170.675090] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 3170.778518] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 2/3) [ 3170.882551] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 3/3) [ 3170.990544] wlx00c0ca4af3c3: authentication with E8F21118F39FDCE9E5653BFE695BA618 timed out [ 3173.320707] wlx00c0ca4af3c3: authenticate with E8F21118F39FDCE9E5653BFE695BA618 [ 3173.365036] wlx00c0ca4af3c3: send auth to E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 3173.380541] wlx00c0ca4af3c3: authenticated [ 3173.382844] wlx00c0ca4af3c3: associate with E8F21118F39FDCE9E5653BFE695BA618 (try 1/3) [ 3173.389027] wlx00c0ca4af3c3: RX AssocResp from E8F21118F39FDCE9E5653BFE695BA618 (capab=0x1431 status=0 aid=3) [ 3173.399195] wlx00c0ca4af3c3: associated [ 3173.450836] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00c0ca4af3c3: link becomes ready [ 7027.740496] loop0: detected capacity change from 0 to 8 [ 7070.185427] loop0: detected capacity change from 0 to 8 [ 7105.086201] loop0: detected capacity change from 0 to 8 [ 8522.836977] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD