Probe #5fcd818cb8 of ASUSTek GL553VD

Log: dmesg.1

[ 1.234013] device-mapper: uevent: version 1.0.3 [ 1.234057] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: XXX@XXX [ 1.252039] xor: automatically using best checksumming function avx [ 1.273009] raid6: avx2x4 gen() 16400 MB/s [ 1.290008] raid6: avx2x2 gen() 19056 MB/s [ 1.307009] raid6: avx2x1 gen() 17726 MB/s [ 1.307030] raid6: using algorithm avx2x2 gen() 19056 MB/s [ 1.324008] raid6: .... xor() 11310 MB/s, rmw enabled [ 1.324030] raid6: using avx2x2 recovery algorithm [ 1.392014] tsc: Refined TSC clocksource calibration: 2807.999 MHz [ 1.392049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c523a63, max_idle_ns: 440795252908 ns [ 1.392062] clocksource: Switched to clocksource tsc [ 1.425020] Btrfs loaded, zoned=yes, fsverity=yes [ 1.452014] ACPI: bus type USB registered [ 1.452051] usbcore: registered new interface driver usbfs [ 1.452063] usbcore: registered new interface driver hub [ 1.452074] usbcore: registered new device driver usb [ 1.766034] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.766060] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.766085] ACPI: button: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input3 [ 1.766108] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.783020] ACPI: button: Power Button [PWRF] ACPI: battery: Slot [BAT0] (battery present) [ 1.828018] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.828279] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.849014] cryptd: max_cpu_qlen set to 1000 [ 1.853007] SCSI subsystem initialized [ 1.858062] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.897371] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.897564] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 1.897738] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.897906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.898707] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.901126] AES CTR mode by8 optimization enabled [ 1.901142] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 1.901315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.901466] usb usb1: Product: xHCI Host Controller [ 1.901607] usb usb1: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 1.901747] usb usb1: SerialNumber: ... [ 1.901883] ACPI: bus type drm_connector registered [ 1.901900] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002) [ 1.902081] Linux agpgart interface v0.103 [ 1.902094] nvme nvme0: pci function 0000:05:00.0 [ 1.902245] nvme nvme0: missing or invalid SUBNQN field. [ 1.902390] nvme nvme0: allocated 16 MiB host memory buffer (4 segments). [ 1.902527] libata version 3.00 loaded. [ 1.902541] hub 1-0:1.0: USB hub found [ 1.902701] hub 1-0:1.0: 16 ports detected [ 1.902852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 1.903015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.903189] usb usb2: Product: xHCI Host Controller [ 1.903368] usb usb2: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 1.903517] usb usb2: SerialNumber: ... [ 1.903667] nvme nvme0: 8/0/0 default/read/poll queues [ 1.903822] hid: raw HID events driver (C) Jiri Kosina [ 1.903836] hub 2-0:1.0: USB hub found [ 1.904035] hub 2-0:1.0: 8 ports detected [ 1.904228] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.904387] nvme0n1: p1 p2 p3 [ 1.916039] ahci 0000:00:17.0: version 3.0 [ 1.938250] ahci 0000:00:17.0: can't derive routing for PCI INT A [ 1.938441] ahci 0000:00:17.0: PCI INT A: not connected [ 1.939192] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 1.940892] ahci 0000:00:17.0: 2/3 ports implemented (port mask 0x6) [ 1.942351] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.942522] scsi host0: ahci [ 1.943805] scsi host1: ahci [ 1.945631] scsi host2: ahci [ 1.947511] ata1: DUMMY [ 1.947530] ata2: SATA max UDMA/133 abar m2048@0xdf52b000 port 0xdf52b180 irq 144 lpm-pol 0 [ 1.947543] ata3: SATA max UDMA/133 abar m2048@0xdf52b000 port 0xdf52b200 irq 144 lpm-pol 0 [ 2.136015] usb 1-6: new high-speed USB device number 2 using xhci_hcd [ 2.245010] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.245032] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.247011] ata2.00: ATA-11: Lexar SSD NS100 1TB, SN11035, max UDMA/133 [ 2.247028] ata2.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.247040] ata3.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133 [ 2.249007] ata3.00: configured for UDMA/133 [ 2.250010] ata2.00: configured for UDMA/133 [ 2.250027] scsi 1:0:0:0: Direct-Access ATA Lexar SSD NS100 035 PQ: 0 ANSI: 5 [ 2.251009] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N AS00 PQ: 0 ANSI: 5 [ 2.291054] sd 1:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 2.298937] sd 1:0:0:0: [sda] Write Protect is off [ 2.299128] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.299289] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.299447] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.299603] usb 1-6: New USB device found, idVendor=0bda, idProduct=57f5, bcdDevice= 0.03 [ 2.299760] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.299905] usb 1-6: Product: USB2.0 HD UVC WebCam [ 2.300059] usb 1-6: Manufacturer: 04081-0009480017141012548 [ 2.300210] usb 1-6: SerialNumber: ... [ 2.300350] sda: sda1 [ 2.300364] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.333047] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.360916] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.360934] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.414013] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 2.552015] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 2.552114] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.553257] i915 0000:00:02.0: [drm] Found kabylake (device ID 591b) integrated display version 9.00 stepping C0 [ 2.630273] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.630463] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.630624] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.630781] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 2.630795] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.630807] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.630818] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 2.630830] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input6 [ 2.630842] fbcon: i915drmfb (fb0) is primary device [ 2.630857] Console: switching to colour frame buffer device 240x67 [ 2.630869] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.674010] usb 1-11: new full-speed USB device number 4 using xhci_hcd [ 2.816012] usb 1-11: New USB device found, idVendor=0b05, idProduct=1854, bcdDevice= 3.02 [ 2.818084] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.818233] usb 1-11: Product: ITE Device(8910) [ 2.818374] usb 1-11: Manufacturer: ITE Tech. Inc. [ 2.834017] usbcore: registered new interface driver usbhid [ 2.834046] usbhid: USB HID core driver [ 2.836009] usbcore: registered new interface driver usbkbd [ 2.852011] asus_wmi: ASUS WMI generic driver loaded [ 2.863008] input: ITE Tech. Inc. ITE Device(8910) as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:0B05:1854.0001/input/input7 [ 2.915014] asus 0003:0B05:1854.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [ITE Tech. Inc. ITE Device(8910)] on usb-0000:00:14.0-11/input0 [ 3.023014] BTRFS: device fsid HASH_DF1-20ED-0BD8-3981-82C2C9DCB2FA devid 1 transid 151 /dev/nvme0n1p3 (259:3) scanned by mount (520) [ 3.024011] BTRFS info (device nvme0n1p3): first mount of filesystem HASH_DF1-20ED-0BD8-3981-82C2C9DCB2FA [ 3.024029] BTRFS info (device nvme0n1p3): using crc32c (crc32c-x86) checksum algorithm [ 3.024041] BTRFS info (device nvme0n1p3): using free-space-tree [ 3.027007] BTRFS info (device nvme0n1p3): start tree-log replay [ 4.426506] zram: Added device: zram0 [ 4.427057] BTRFS info (device nvme0n1p3 state M): enabling auto defrag [ 4.427065] BTRFS info (device nvme0n1p3 state M): use zstd compression, level 1 [ 4.427104] fuse: init (API version 7.42) [ 4.441019] vboxdrv: Found 8 processor cores/threads [ 4.458015] vboxdrv: TSC mode is Invariant, tentative frequency 2807998991 Hz [ 4.458055] vboxdrv: Successfully loaded version 7.1.8 r168469 (interface 0x00340001) [ 4.464010] VBoxNetFlt: Successfully started. [ 4.469011] VBoxNetAdp: Successfully started. [ 4.612021] zram0: detected capacity change from 0 to 16269312 [ 4.657013] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8 [ 4.669014] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:05 [mem 0xfdb00000-0xfdffffff] caller get_primary_reg_base+0x66/0xa0 [intel_pmc_core] mapping multiple BARs [ 4.669405] intel_pmc_core INT33A1:00: initialized [ 4.676023] ACPI: AC: AC Adapter [AC0] (on-line) [ 4.682018] Adding 8134652k swap on /dev/zram0. Priority:100 extents:1 across:8134652k SSDsc [ 4.688033] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 4.765112] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 4.778558] Adding 17899516k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:17899516k SS [ 4.778587] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.778852] ACPI: thermal: Thermal Zone [THRM] (61 C) [ 4.778884] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 4.797015] mc: Linux media interface: v0.10 [ 4.818018] Bluetooth: Core ver 2.22 [ 4.818072] NET: Registered PF_BLUETOOTH protocol family [ 4.818097] Bluetooth: HCI device and connection manager initialized [ 4.818118] Bluetooth: HCI socket layer initialized [ 4.818139] Bluetooth: L2CAP socket layer initialized [ 4.818161] Bluetooth: SCO socket layer initialized [ 4.822021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.827024] videodev: Linux video capture interface: v2.00 [ 4.831020] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.845637] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.845900] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.845920] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.845936] i2c i2c-4: Successfully instantiated SPD at 0x50 [ 4.846166] i2c i2c-4: Successfully instantiated SPD at 0x52 [ 4.849014] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.856163] asus_wmi: Initialization: 0x1 [ 4.856187] asus_wmi: BIOS WMI version: 8.1 [ 4.856204] asus_wmi: SFUN value: 0x4a0061 [ 4.856220] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 4.867564] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 5D2F723C5964F7184447809A76672C8C, XID 541, IRQ 146 [ 4.867836] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9 [ 4.868099] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -61 [ 4.868115] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -61 [ 4.868131] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -61 [ 4.881014] nvidia: loading out-of-tree module taints kernel. [ 4.881067] nvidia: module license 'NVIDIA' taints kernel. [ 4.881083] Disabling lock debugging due to kernel taint [ 4.881105] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.881122] nvidia: module license taints kernel. [ 4.926097] input: ELAN1200:00 04F3:3045 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-ELAN1200:00/0018:04F3:3045.0002/input/input10 [ 4.926144] input: ELAN1200:00 04F3:3045 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-ELAN1200:00/0018:04F3:3045.0002/input/input11 [ 4.926162] hid-generic 0018:04F3:3045.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3045] on i2c-ELAN1200:00 [ 4.929016] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.929064] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.929096] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.929120] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.929137] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.338022] ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 5.338400] nvidia-nvlink: Nvlink Core is being initialized, major device number 234 [ 5.338432] [ 5.338457] ee1004 4-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 5.340012] Intel(R) Wireless WiFi driver for Linux [ 5.342060] iTCO_vendor_support: vendor-support=0 [ 5.345019] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 5.563347] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 5.563567] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 5.563741] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.563895] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 5.564079] iwlwifi 0000:02:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0 [ 5.564364] iwlwifi 0000:02:00.0: PCI dev 095a/5010, rev=0x210, rfid=0xd55555d5 [ 5.564626] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265 [ 5.564905] usb 1-6: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:57f5) [ 5.565188] usbcore: registered new interface driver uvcvideo [ 5.565211] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM [ 5.565496] iwlwifi 0000:02:00.0: Found debug configuration: 0 [ 5.565757] iwlwifi 0000:02:00.0: loaded firmware version 29.f2390aa8.0 7265D-29.ucode op_mode iwlmvm [ 5.566016] intel_tcc_cooling: Programmable TCC Offset detected [ 5.566030] input: ELAN1200:00 04F3:3045 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-ELAN1200:00/0018:04F3:3045.0002/input/input12 [ 5.566045] input: ELAN1200:00 04F3:3045 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-ELAN1200:00/0018:04F3:3045.0002/input/input13 [ 5.566057] hid-multitouch 0018:04F3:3045.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3045] on i2c-ELAN1200:00 [ 5.566297] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 5.566322] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.566588] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.566870] intel_rapl_common: Found RAPL domain package [ 5.566897] intel_rapl_common: Found RAPL domain core [ 5.566921] intel_rapl_common: Found RAPL domain uncore [ 5.566943] intel_rapl_common: Found RAPL domain dram [ 5.566960] usbcore: registered new interface driver btusb [ 5.566979] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 [ 5.567057] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.e.bseq [ 5.567085] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.567330] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.567554] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.567799] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.568029] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.568263] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b [ 5.568495] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 5.568783] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 5.569049] iwlwifi 0000:02:00.0: base HW address: 46CBDBF91FC8C757ED6C3C90FE5E68FF, OTP minor version: 0x0 [ 5.569229] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 5.569242] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 5.569255] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 5.569266] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 5.569276] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 575.51.02 Thu Apr 10 16:08:06 UTC 2025 [ 5.569288] nvidia_modeset: no symbol version for nvidia_get_rm_ops [ 5.588779] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.589022] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.589312] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 575.51.02 Thu Apr 10 15:37:26 UTC 2025 [ 5.589341] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 5.737012] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated [ 6.083014] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1 [ 6.083129] nvidia 0000:01:00.0: [drm] No compatible format found [ 6.083419] nvidia 0000:01:00.0: [drm] Cannot find any crtc or sizes [ 6.527011] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.527052] Bluetooth: BNEP filters: protocol multicast [ 6.527072] Bluetooth: BNEP socket layer initialized [ 6.530013] Bluetooth: MGMT ver 1.23 [ 6.532045] nvme nvme0: using unchecked data buffer [ 7.376014] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 7.543015] r8169 0000:03:00.0 enp3s0: Link is Down [ 7.558017] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 7.643011] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 7.644009] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring [ 7.649018] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 7.684016] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 7.761016] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 7.762008] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring [ 7.803039] NET: Registered PF_PACKET protocol family [ 15.928015] Bluetooth: RFCOMM TTY layer initialized [ 15.928058] Bluetooth: RFCOMM socket layer initialized [ 15.928074] Bluetooth: RFCOMM ver 1.11 [ 20.024021] nvidia_uvm: module uses symbols nvUvmInterfaceDupAddressSpace from proprietary module nvidia, inheriting taint. [ 140.658118] usb 1-1: new high-speed USB device number 5 using xhci_hcd [ 140.781092] usb 1-1: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00 [ 140.782782] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 140.783466] usb 1-1: Product: [ 140.784075] usb 1-1: Manufacturer: General [ 140.784648] usb 1-1: SerialNumber: ... [ 140.813021] usb-storage 1-1:1.0: USB Mass Storage device detected [ 140.813596] scsi host3: usb-storage 1-1:1.0 [ 140.814072] usbcore: registered new interface driver usb-storage [ 140.817021] usbcore: registered new interface driver uas [ 141.872082] scsi 3:0:0:0: Direct-Access General 5.00 PQ: 0 ANSI: 2 [ 141.900654] sd 3:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 141.901170] sd 3:0:0:0: [sdb] Write Protect is off [ 141.901647] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 141.902119] sd 3:0:0:0: [sdb] No Caching mode page found [ 141.902515] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 141.902867] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 144.685039] exFAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 245.332020] wlp2s0: authenticate with C084E807D17AD148CB244D01759C6438 (local address=46CBDBF91FC8C757ED6C3C90FE5E68FF) [ 245.332117] wlp2s0: send auth to C084E807D17AD148CB244D01759C6438 (try 1/3) [ 245.336030] wlp2s0: authenticated [ 245.336082] wlp2s0: associate with C084E807D17AD148CB244D01759C6438 (try 1/3) [ 245.340012] wlp2s0: RX AssocResp from C084E807D17AD148CB244D01759C6438 (capab=0x411 status=0 aid=6) [ 245.341012] wlp2s0: associated [ 291.750128] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 291.750942] iwlwifi 0000:02:00.0: missed_beacons:19, missed_beacons_since_rx:1 [ 296.358046] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.358934] iwlwifi 0000:02:00.0: missed_beacons:19, missed_beacons_since_rx:1 [ 296.460103] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.460843] iwlwifi 0000:02:00.0: missed_beacons:20, missed_beacons_since_rx:1 [ 296.563098] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.563809] iwlwifi 0000:02:00.0: missed_beacons:21, missed_beacons_since_rx:1 [ 296.665057] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.666082] iwlwifi 0000:02:00.0: missed_beacons:22, missed_beacons_since_rx:1 [ 296.767047] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.767779] iwlwifi 0000:02:00.0: missed_beacons:23, missed_beacons_since_rx:1 [ 296.870076] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.870838] iwlwifi 0000:02:00.0: missed_beacons:24, missed_beacons_since_rx:1 [ 296.972043] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 296.972816] iwlwifi 0000:02:00.0: missed_beacons:25, missed_beacons_since_rx:1 [ 297.074044] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 297.074985] iwlwifi 0000:02:00.0: missed_beacons:26, missed_beacons_since_rx:1 [ 297.177089] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 297.177812] iwlwifi 0000:02:00.0: missed_beacons:27, missed_beacons_since_rx:1 [ 297.279114] iwlwifi 0000:02:00.0: missed beacons exceeds threshold, but receiving data. Stay connected, Expect bugs. [ 297.279772] iwlwifi 0000:02:00.0: missed_beacons:28, missed_beacons_since_rx:1 [ 423.612053] Non-volatile memory driver v1.3 [ 423.702014] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 423.878046] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 423.878887] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 423.879699] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 423.958053] warning: `hwinfo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 570.047049] usb 1-1: USB disconnect, device number 5 [ 4465.613016] BTRFS: device label ... devid 1 transid 847853 /dev/sda1 (8:1) scanned by pool-9 (19319) [ 4465.614020] BTRFS info (device sda1): first mount of filesystem HASH_57E-8D36-6E35-025B-E2AB7B74A17C [ 4465.614135] BTRFS info (device sda1): using crc32c (crc32c-x86) checksum algorithm [ 4465.614178] BTRFS info (device sda1): using free-space-tree [ 4523.284271] BTRFS info (device sda1): last unmount of filesystem HASH_57E-8D36-6E35-025B-E2AB7B74A17C [ 4544.378035] BTRFS: device label ... devid 1 transid 847854 /dev/sda1 (8:1) scanned by pool-10 (19592) [ 4544.392030] BTRFS info (device sda1): first mount of filesystem HASH_57E-8D36-6E35-025B-E2AB7B74A17C [ 4544.392170] BTRFS info (device sda1): using crc32c (crc32c-x86) checksum algorithm [ 4544.392240] BTRFS info (device sda1): using free-space-tree [ 5884.211088] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.266089] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.322120] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.378139] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.434108] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.489073] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.545100] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.601045] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.656081] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.712105] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.768052] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.824080] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.880093] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.935105] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5884.991097] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5885.047095] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5885.102056] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5885.158097] i2c_hid_acpi i2c-ELAN1200:00: i2c_hid_get_input: incomplete report (16/16466) [ 5908.367022] wlp2s0: deauthenticating from C084E807D17AD148CB244D01759C6438 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5908.646007] PM: hibernation: hibernation entry


Hardware for Linux and BSD

GitHub