[ 0.000000] Linux version 6.6.13+bpo-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.6.13-1~bpo12+1 (2024-02-15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.410 MHz processor [ 0.002590] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002594] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008905] AGP: No AGP bridge found [ 0.008964] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008970] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008972] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010740] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010749] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016272] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.017045] RAMDISK: [mem 0x2ddb7000-0x32ed2fff] ACPI: Early table checksum verification disabled [ 0.017057] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017062] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017068] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017073] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.017078] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017083] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017086] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017090] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017094] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017097] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017101] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017105] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017108] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017112] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017193] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017593] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017601] Movable zone start for each node [ 0.017604] Early memory node ranges [ 0.017605] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017667] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027800] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027826] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027840] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028733] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028792] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029021] ACPI: PM-Timer IO Port: 0x808 [ 0.029029] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029038] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029041] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029044] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029046] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029050] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029052] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029057] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.029075] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029107] Booting paravirtualized kernel on bare hardware [ 0.029109] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034643] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035365] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.035373] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.035376] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035403] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro quiet [ 0.035457] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64", will be passed to user space. [ 0.042022] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045342] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045437] Fallback order for Node 0: 0 [ 0.045443] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.045445] Policy zone: Normal [ 0.045455] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045457] AGP: Checking aperture... [ 0.051759] AGP: No AGP bridge found [ 0.051761] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.051763] Aperture pointing to e820 RAM. Ignoring. [ 0.051764] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051765] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051766] AGP: This costs you 64MB of RAM [ 0.051768] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051772] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.097807] Memory: 3162992K/25119580K available (16384K kernel code, 2363K rwdata, 10544K rodata, 3964K init, 3628K bss, 703304K reserved, 0K cma-reserved) [ 0.106959] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107149] ftrace: allocating 43115 entries in 169 pages [ 0.120351] ftrace: allocated 169 pages with 4 groups [ 0.121526] Dynamic Preempt: voluntary [ 0.121762] rcu: Preemptible hierarchical RCU implementation. [ 0.121764] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.121765] Trampoline variant of Tasks RCU enabled. [ 0.121766] Rude variant of Tasks RCU enabled. [ 0.121766] Tracing variant of Tasks RCU enabled. [ 0.121767] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.121768] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125986] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.126188] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.126290] spurious 8259A interrupt: IRQ7. [ 0.129576] Console: colour VGA+ 80x25 [ 0.129579] printk: console [tty0] enabled [ 0.129847] ACPI: Core revision 20230628 [ 0.130006] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.130020] APIC: Switch to symmetric I/O mode setup [ 0.130369] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150021] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c96f6557a8, max_idle_ns: 440795341985 ns [ 0.150028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.82 BogoMIPS (lpj=12373640) [ 0.150052] LVT offset 1 assigned for vector 0xf9 [ 0.150059] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150061] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150065] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150068] Spectre V2 : Mitigation: Retpolines [ 0.150069] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150070] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150071] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150072] RETBleed: Mitigation: untrained return thunk [ 0.150074] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150076] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150080] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150082] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150083] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150085] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150086] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.177134] Freeing SMP alternatives memory: 36K [ 0.177140] pid_max: default: 32768 minimum: 301 [ 0.177985] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.178245] landlock: Up and running. [ 0.178247] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.178274] AppArmor: AppArmor initialized [ 0.178277] TOMOYO Linux initialized [ 0.178284] LSM support for eBPF active [ 0.178664] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.178746] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.292722] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.293000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293023] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293054] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293079] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.293109] ... version: 0 [ 0.293110] ... bit width: 48 [ 0.293111] ... generic registers: 6 [ 0.293111] ... value mask: 0000ffffffffffff [ 0.293113] ... max period: 00007fffffffffff [ 0.293114] ... fixed-purpose events: 0 [ 0.293115] ... event mask: 000000000000003f [ 0.293222] signal: max sigframe size: 1776 [ 0.293273] rcu: Hierarchical SRCU implementation. [ 0.293275] rcu: Max phase no-delay instances is 1000. [ 0.294024] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.294024] smp: Bringing up secondary CPUs ... [ 0.294024] smpboot: x86: Booting SMP configuration: [ 0.294024] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.324029] smp: Brought up 1 node, 8 CPUs [ 0.324029] smpboot: Max logical packages: 1 [ 0.324029] smpboot: Total of 8 processors activated (49494.56 BogoMIPS) [ 0.379049] node 0 deferred pages initialised in 52ms [ 0.382730] devtmpfs: initialized [ 0.382730] x86/mm: Memory block size: 128MB [ 0.386616] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.386616] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.386616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386616] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.386616] pinctrl core: initialized pinctrl subsystem [ 0.387818] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.388652] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.389365] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.390761] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.391117] thermal_sys: Registered thermal governor 'fair_share' [ 0.391117] thermal_sys: Registered thermal governor 'bang_bang' [ 0.391117] thermal_sys: Registered thermal governor 'step_wise' [ 0.391117] thermal_sys: Registered thermal governor 'user_space' [ 0.391117] thermal_sys: Registered thermal governor 'power_allocator' [ 0.391117] cpuidle: using governor ladder [ 0.391117] cpuidle: using governor menu [ 0.391117] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.391117] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.391117] PCI: not using MMCONFIG [ 0.391117] PCI: Using configuration type 1 for base access [ 0.391117] PCI: Using configuration type 1 for extended access [ 0.391117] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.391117] mtrr: probably your BIOS does not setup all CPUs. [ 0.391117] mtrr: corrected configuration. [ 0.391117] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.391117] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391117] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.391117] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391117] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.391117] ACPI: Added _OSI(Module Device) [ 0.391117] ACPI: Added _OSI(Processor Device) [ 0.391117] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.391117] ACPI: Added _OSI(Processor Aggregator Device) [ 0.397959] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.398770] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.398770] ACPI: Interpreter enabled [ 0.398770] ACPI: PM: (supports S0 S3 S4 S5) [ 0.398770] ACPI: Using IOAPIC for interrupt routing [ 0.398770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.398770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.398770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.398770] PCI: Using E820 reservations for host bridge windows [ 0.398770] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.406630] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.406636] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.407031] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.407188] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.407206] pci 0000:00:02.0: enabling Extended Tags [ 0.407230] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.407330] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.407348] pci 0000:00:04.0: enabling Extended Tags [ 0.407371] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.407474] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.407492] pci 0000:00:05.0: enabling Extended Tags [ 0.407515] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.407608] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.407626] pci 0000:00:06.0: enabling Extended Tags [ 0.407649] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.407750] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.407768] pci 0000:00:09.0: enabling Extended Tags [ 0.407814] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.407909] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.407927] pci 0000:00:0a.0: enabling Extended Tags [ 0.407950] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.408052] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.408066] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.408225] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.408238] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.408383] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.408445] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.408539] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.408552] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.408701] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.408763] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.408858] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.408983] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.408997] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.409172] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.409311] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.409464] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.409591] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.409605] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.409744] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.409894] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.409957] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.410049] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.410107] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.410161] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.410218] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.410275] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.410328] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.410429] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 [ 0.410443] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.410498] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.410548] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.410606] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.410703] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.410718] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.410790] pci 0000:01:00.1: supports D1 D2 [ 0.410879] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.410953] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.411029] pci 0000:02:00.0: PME# supported from D3hot [ 0.411108] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.411176] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.411258] pci 0000:03:00.0: supports D1 D2 [ 0.411260] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.411359] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.411429] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.411533] pci 0000:04:00.0: supports D1 D2 [ 0.411535] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.411634] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.411716] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.411803] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.411910] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.411926] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.412027] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.422049] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.422138] pci 0000:06:00.0: reg 0x10: [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.422403] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.422467] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.422485] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.422652] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.422658] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.422664] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.422666] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.422668] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.422670] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.422672] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.423483] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.423545] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.423609] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.423696] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.423749] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.423791] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.423832] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.423873] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.424072] iommu: Default domain type: Translated [ 0.424072] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.424072] pps_core: LinuxPPS API ver. 1 registered [ 0.424072] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.424072] PTP clock support registered [ 0.424072] EDAC MC: Ver: 3.0.0 [ 0.424072] NetLabel: Initializing [ 0.424072] NetLabel: domain hash size = 128 [ 0.424072] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.424072] NetLabel: unlabeled traffic allowed by default [ 0.424072] PCI: Using ACPI for IRQ routing [ 0.431145] PCI: pci_cache_line_size set to 64 bytes [ 0.431207] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.431244] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.431244] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.431244] vgaarb: loaded [ 0.431244] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.431244] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.434128] clocksource: Switched to clocksource tsc-early [ 0.434899] VFS: Disk quotas dquot_6.6.0 [ 0.434978] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.435228] AppArmor: AppArmor Filesystem Enabled [ 0.435245] pnp: PnP ACPI init [ 0.435354] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.435467] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.435863] system 00:03: [io 0x040b] has been reserved [ 0.435866] system 00:03: [io 0x04d6] has been reserved [ 0.435868] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.435870] system 00:03: [io 0x0c14] has been reserved [ 0.435872] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.435874] system 00:03: [io 0x0c52] has been reserved [ 0.435875] system 00:03: [io 0x0c6c] has been reserved [ 0.435877] system 00:03: [io 0x0c6f] has been reserved [ 0.435879] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.435881] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.435883] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.435885] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.435887] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.435889] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.435891] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.435893] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.435895] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.435897] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.435899] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.435903] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.435905] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.435908] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.435911] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.435914] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.435916] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.436025] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.436257] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.436793] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.444179] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.444496] NET: Registered PF_INET protocol family [ 0.444868] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.449724] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.449803] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.450173] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.450862] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.451157] TCP: Hash tables configured (established 262144 bind 65536) [ 0.451509] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.451710] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.451862] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.452055] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.452068] NET: Registered PF_XDP protocol family [ 0.452093] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 24992 usecs [ 0.497850] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19335 usecs [ 0.517848] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.537847] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19518 usecs [ 0.538083] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.538445] PCI: CLS 64 bytes, default 64 [ 0.538535] Trying to unpack rootfs image as initramfs... [ 0.539252] PCI-DMA: Disabling AGP. [ 0.539318] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.539320] PCI-DMA: using GART IOMMU. [ 0.539322] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.540190] software IO TLB: tearing down default memory pool [ 0.542727] LVT offset 0 assigned for vector 0x400 [ 0.547732] perf: AMD IBS detected (0x000000ff) [ 0.547739] amd_uncore: 4 amd_nb counters detected [ 0.549032] Initialise system trusted keyrings [ 0.549050] Key type blacklist registered [ 0.549118] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.549128] zbud: loaded [ 0.549517] fuse: init (API version 7.39) [ 0.549858] integrity: Platform Keyring initialized [ 0.549863] integrity: Machine keyring initialized [ 0.561499] Key type asymmetric registered [ 0.561503] Asymmetric key parser 'x509' registered [ 1.442941] Freeing initrd memory: 83056K [ 1.449608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.449663] io scheduler mq-deadline registered [ 1.451970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.452018] ACPI: \_PR_.P001: Found 2 idle states [ 1.452124] ACPI: \_PR_.P002: Found 2 idle states [ 1.452220] ACPI: \_PR_.P003: Found 2 idle states [ 1.452319] ACPI: \_PR_.P004: Found 2 idle states [ 1.452470] ACPI: \_PR_.P005: Found 2 idle states [ 1.452563] ACPI: \_PR_.P006: Found 2 idle states [ 1.452656] ACPI: \_PR_.P007: Found 2 idle states [ 1.452789] ACPI: \_PR_.P008: Found 2 idle states [ 1.453200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.453399] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.454261] Linux agpgart interface v0.103 [ 1.454332] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.455124] i8042: PNP: No PS/2 controller found. [ 1.455209] mousedev: PS/2 mouse device common for all mice [ 1.455231] rtc_cmos 00:06: RTC can wake from S4 [ 1.455443] rtc_cmos 00:06: registered as rtc0 [ 1.455466] rtc_cmos 00:06: setting system clock to 2024-05-17T14:04:08 UTC (1715954648) [ 1.455519] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.455531] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.455636] ledtrig-cpu: registered to indicate activity on CPUs [ 1.468387] NET: Registered PF_INET6 protocol family [ 1.474491] Segment Routing with IPv6 [ 1.474509] In-situ OAM (IOAM) with IPv6 [ 1.474533] mip6: Mobile IPv6 [ 1.474537] NET: Registered PF_PACKET protocol family [ 1.474582] mpls_gso: MPLS GSO support [ 1.474596] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.475173] microcode: microcode updated early to new patch_level=0x0600063e [ 1.475216] microcode: CPU1: patch_level=0x0600063e [ 1.475219] microcode: CPU0: patch_level=0x0600063e [ 1.475219] microcode: CPU3: patch_level=0x0600063e [ 1.475219] microcode: CPU2: patch_level=0x0600063e [ 1.475220] microcode: CPU4: patch_level=0x0600063e [ 1.475220] microcode: CPU5: patch_level=0x0600063e [ 1.475223] microcode: CPU7: patch_level=0x0600063e [ 1.475223] microcode: CPU6: patch_level=0x0600063e [ 1.481361] microcode: CPU2: new patch_level=0x0600063e [ 1.481358] microcode: CPU1: new patch_level=0x0600063e [ 1.487495] microcode: CPU0: new patch_level=0x0600063e [ 1.487501] microcode: CPU4: new patch_level=0x0600063e [ 1.487505] microcode: CPU5: new patch_level=0x0600063e [ 1.487506] microcode: CPU3: new patch_level=0x0600063e [ 1.487508] microcode: CPU6: new patch_level=0x0600063e [ 1.487508] microcode: CPU7: new patch_level=0x0600063e [ 1.487538] microcode: Microcode Update Driver: v2.2. [ 1.487546] IPI shorthand broadcast: enabled [ 1.498472] sched_clock: Marking stable (1492015439, 3815471)->(1514984336, -19153426) [ 1.498869] registered taskstats version 1 [ 1.499162] Loading compiled-in X.509 certificates [ 1.526888] Loaded X.509 cert 'Build time autogenerated kernel key: e89427945035c8dcb005e1ccdc6183fd860e9aa0' [ 1.529726] Key type .fscrypt registered [ 1.529728] Key type fscrypt-provisioning registered [ 1.535142] Key type encrypted registered [ 1.535150] AppArmor: AppArmor sha1 policy hashing enabled [ 1.535160] ima: No TPM chip found, activating TPM-bypass! [ 1.535163] ima: Allocated hash algorithm: sha256 [ 1.535175] ima: No architecture policies found [ 1.535189] evm: Initialising EVM extended attributes: [ 1.535190] evm: security.selinux [ 1.535192] evm: security.SMACK64 (disabled) [ 1.535193] evm: security.SMACK64EXEC (disabled) [ 1.535194] evm: security.SMACK64TRANSMUTE (disabled) [ 1.535194] evm: security.SMACK64MMAP (disabled) [ 1.535195] evm: security.apparmor [ 1.535196] evm: security.ima [ 1.535197] evm: security.capability [ 1.535198] evm: HMAC attrs: 0x1 [ 1.567928] tsc: Refined TSC clocksource calibration: 3093.306 MHz [ 1.567949] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969448c73, max_idle_ns: 440795345271 ns [ 1.568008] clocksource: Switched to clocksource tsc [ 1.711642] RAS: Correctable Errors collector initialized. [ 1.711731] clk: Disabling unused clocks [ 1.713982] Freeing unused decrypted memory: 2028K [ 1.715002] Freeing unused kernel image (initmem) memory: 3964K [ 1.724002] Write protecting the kernel read-only data: 28672k [ 1.724861] Freeing unused kernel image (rodata/data gap) memory: 1744K [ 1.787459] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.787465] Run /init as init process [ 1.787467] with arguments: [ 1.787468] /init [ 1.787469] with environment: [ 1.787470] HOME=/ [ 1.787471] TERM=linux [ 1.787471] BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 [ 1.938579] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.938646] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.948220] Floppy drive(s): fd0 is 1.44M [ 1.957123] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.957135] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.957316] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.958275] ACPI: button: Power Button [PWRF] FDC 0 is a post-1991 82077 [ 1.980711] SCSI subsystem initialized [ 1.992796] ACPI: bus type USB registered [ 1.992844] usbcore: registered new interface driver usbfs [ 1.992859] usbcore: registered new interface driver hub [ 1.992880] usbcore: registered new device driver usb [ 2.036357] ACPI: bus type drm_connector registered [ 2.058903] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.058908] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.058911] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] libata version 3.00 loaded. [ 2.060445] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.060546] QUIRK: Enable AMD PLL fix [ 2.060564] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.060572] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 2.060630] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.060829] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.060834] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 2.060838] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.060891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.060895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.060897] usb usb1: Product: xHCI Host Controller [ 2.060899] usb usb1: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.060901] usb usb1: SerialNumber: ... [ 2.061717] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.062207] hub 1-0:1.0: USB hub found [ 2.062220] hub 1-0:1.0: 2 ports detected [ 2.062402] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.062444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.062447] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.062450] usb usb2: Product: xHCI Host Controller [ 2.062451] usb usb2: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.062453] usb usb2: SerialNumber: ... [ 2.062597] hub 2-0:1.0: USB hub found [ 2.062618] hub 2-0:1.0: 2 ports detected [ 2.062765] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 2.062771] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.062780] ehci-pci 0000:00:12.2: debug port 1 [ 2.062822] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.067873] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.068776] pata_via 0000:05:00.1: version 0.3.4 [ 2.069443] scsi host0: pata_atiixp [ 2.069662] scsi host1: pata_via [ 2.069862] scsi host3: pata_via [ 2.069926] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 [ 2.069929] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 [ 2.069944] scsi host2: pata_atiixp [ 2.070028] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.070031] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.075907] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.075986] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.075989] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.075994] usb usb3: Product: EHCI Host Controller [ 2.075996] usb usb3: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.075998] usb usb3: SerialNumber: ... [ 2.076207] hub 3-0:1.0: USB hub found [ 2.076219] hub 3-0:1.0: 5 ports detected [ 2.076479] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.076487] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.076492] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.076501] ehci-pci 0000:00:13.2: debug port 1 [ 2.076533] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.095920] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.096059] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.096064] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.096067] usb usb4: Product: EHCI Host Controller [ 2.096068] usb usb4: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.096070] usb usb4: SerialNumber: ... [ 2.096228] hub 4-0:1.0: USB hub found [ 2.096239] hub 4-0:1.0: 5 ports detected [ 2.096519] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.096527] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 2.096532] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.096545] ehci-pci 0000:00:16.2: debug port 1 [ 2.096576] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.111922] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.112054] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.112059] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.112064] usb usb5: Product: EHCI Host Controller [ 2.112066] usb usb5: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.112067] usb usb5: SerialNumber: ... [ 2.112230] hub 5-0:1.0: USB hub found [ 2.112240] hub 5-0:1.0: 4 ports detected [ 2.112463] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.112470] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 2.112534] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.112712] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.112717] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.112722] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.112769] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.112772] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.112774] usb usb6: Product: xHCI Host Controller [ 2.112776] usb usb6: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.112777] usb usb6: SerialNumber: ... [ 2.112918] hub 6-0:1.0: USB hub found [ 2.112934] hub 6-0:1.0: 2 ports detected [ 2.113093] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.113133] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.113136] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.113138] usb usb7: Product: xHCI Host Controller [ 2.113140] usb usb7: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.113141] usb usb7: SerialNumber: ... [ 2.113276] hub 7-0:1.0: USB hub found [ 2.113289] hub 7-0:1.0: 2 ports detected [ 2.243844] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.243857] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.243876] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.243886] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.243890] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.367918] usb 5-1: new high-speed USB device number 2 using ehci-pci [ 2.404316] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.405520] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.460172] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.460189] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 2.460231] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.461378] ahci 0000:00:11.0: version 3.0 [ 2.461604] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.461610] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.462361] scsi host4: ahci [ 2.462561] scsi host5: ahci [ 2.462748] scsi host6: ahci [ 2.462938] scsi host7: ahci [ 2.463026] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.463030] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.463032] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.463035] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.463246] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.463251] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.463687] scsi host8: ahci [ 2.463895] scsi host9: ahci [ 2.463974] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 [ 2.463978] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 [ 2.524005] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.524010] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.524012] usb usb8: Product: OHCI PCI host controller [ 2.524014] usb usb8: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.524015] usb usb8: SerialNumber: ... [ 2.524174] hub 8-0:1.0: USB hub found [ 2.524185] hub 8-0:1.0: 5 ports detected [ 2.524650] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.524656] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.524683] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.532799] usb 5-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.532804] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.532807] usb 5-1: Product: 802.11n NIC [ 2.532808] usb 5-1: Manufacturer: Realtek [ 2.532810] usb 5-1: SerialNumber: ... [ 2.591975] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.591979] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.591981] usb usb9: Product: OHCI PCI host controller [ 2.591983] usb usb9: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.591984] usb usb9: SerialNumber: ... [ 2.592067] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.592291] hub 9-0:1.0: USB hub found [ 2.592301] hub 9-0:1.0: 5 ports detected [ 2.592813] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.592819] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.592856] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.665911] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.665915] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.665917] usb usb10: Product: OHCI PCI host controller [ 2.665918] usb usb10: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.665920] usb usb10: SerialNumber: ... [ 2.666139] hub 10-0:1.0: USB hub found [ 2.666148] hub 10-0:1.0: 2 ports detected [ 2.666472] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.666482] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.666502] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.737929] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.737933] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.737935] usb usb11: Product: OHCI PCI host controller [ 2.737937] usb usb11: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.737938] usb usb11: SerialNumber: ... [ 2.738152] hub 11-0:1.0: USB hub found [ 2.738161] hub 11-0:1.0: 4 ports detected [ 2.779842] ata10: SATA link down (SStatus 0 SControl 330) [ 2.779878] ata7: SATA link down (SStatus 0 SControl 300) [ 2.795922] usb 8-1: new low-speed USB device number 2 using ohci-pci [ 2.863922] usb 9-2: new full-speed USB device number 2 using ohci-pci [ 2.939941] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.939942] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.939976] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.940002] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.940205] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.940243] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.940351] ata6.00: configured for UDMA/133 [ 2.941103] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.941408] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.941867] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.942375] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 2.942725] ata8.00: configured for UDMA/133 [ 2.942819] ata9.00: configured for UDMA/133 [ 2.943020] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.944932] ata5.00: configured for UDMA/133 [ 2.945110] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 2.945590] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.949693] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.994260] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.058884] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.058890] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.058926] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.065083] usb 9-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.065095] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.065101] usb 9-2: Product: A4Tech Gaming Mouse [ 3.065105] usb 9-2: Manufacturer: PixArt [ 3.084886] hid: raw HID events driver (C) Jiri Kosina [ 3.100500] sd 0:0:0:0: [sda] Write Protect is off [ 3.100505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.100525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.100553] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.100845] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.101081] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.101086] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.101102] sd 4:0:0:0: [sdb] Write Protect is off [ 3.101105] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.101107] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.101120] sd 5:0:0:0: [sdc] Write Protect is off [ 3.101123] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.101131] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.101142] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.101169] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.101169] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.102009] sda: sda1 sda2 sda3 [ 3.102042] sdc: sdc1 sdc2 [ 3.102193] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.102243] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.125958] sdb: sdb1 sdb2 sdb3 [ 3.126204] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.141238] usbcore: registered new interface driver usbhid [ 3.141241] usbhid: USB HID core driver [ 3.141839] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.148067] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:09DA:3519.0001/input/input2 [ 3.148168] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 3.148500] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.1/0003:09DA:3519.0002/input/input4 [ 3.174119] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.174571] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.174582] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.174627] sd 8:0:0:0: [sdd] Write Protect is off [ 3.174635] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.174687] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.174760] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.191119] sdd: sdd1 sdd2 [ 3.191385] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 3.207980] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 6.231396] [drm] amdgpu kernel modesetting enabled. [ 6.231539] amdgpu: Virtual CRAT table created for CPU [ 6.231554] amdgpu: Topology: Add CPU node [ 6.231871] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 6.231887] [drm] register mmio base: 0xFEA00000 [ 6.231889] [drm] register mmio size: 262144 [ 6.231962] [drm] add ip block number 0 <vi_common> [ 6.231964] [drm] add ip block number 1 <gmc_v8_0> [ 6.231966] [drm] add ip block number 2 <tonga_ih> [ 6.231967] [drm] add ip block number 3 <gfx_v8_0> [ 6.231968] [drm] add ip block number 4 <sdma_v3_0> [ 6.231969] [drm] add ip block number 5 <powerplay> [ 6.231971] [drm] add ip block number 6 <dm> [ 6.231972] [drm] add ip block number 7 <uvd_v6_0> [ 6.231973] [drm] add ip block number 8 <vce_v3_0> [ 6.232154] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 6.232200] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 6.232203] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 6.232221] [drm] UVD is enabled in VM mode [ 6.232222] [drm] UVD ENC is enabled in VM mode [ 6.232224] [drm] VCE enabled in VM mode [ 6.232253] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 6.233328] Console: switching to colour dummy device 80x25 [ 6.233334] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 6.233337] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 6.233363] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 6.233413] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 6.233683] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 6.233686] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 6.233692] [drm] Detected VRAM RAM=8192M, BAR=256M [ 6.233694] [drm] RAM width 256bits GDDR5 [ 6.233876] [drm] amdgpu: 8192M of VRAM memory ready [ 6.233878] [drm] amdgpu: 11998M of GTT memory ready. [ 6.233898] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 6.234290] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 6.234422] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 6.234589] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 6.234729] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 6.234794] [drm] Chained IB support enabled! [ 6.234820] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 6.235095] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 6.237160] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 6.239557] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 6.239671] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 6.239790] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 6.240033] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 6.242712] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 6.243336] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 6.244579] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 6.245613] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 6.555963] [drm] Display Core v3.2.247 initialized on DCE 11.2 [ 6.618353] [drm] UVD and UVD ENC initialized successfully. [ 6.727532] usb 3-5: new high-speed USB device number 4 using ehci-pci [ 6.728315] [drm] VCE initialized successfully. [ 6.729027] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 6.729041] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 6.732935] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 6.733669] [drm] Initialized amdgpu 3.54.0 20150101 for 0000:01:00.0 on minor 0 [ 6.748030] fbcon: amdgpudrmfb (fb0) is primary device [ 6.841839] Console: switching to colour frame buffer device 160x64 [ 6.859034] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 6.884330] usb 3-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 6.884336] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.884624] hub 3-5:1.0: USB hub found [ 6.884701] hub 3-5:1.0: 2 ports detected [ 7.171944] usb 3-5.1: new high-speed USB device number 5 using ehci-pci [ 7.199187] usb 8-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 7.199198] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.199204] usb 8-1: Product: NOVA AVR [ 7.199208] usb 8-1: Manufacturer: MGE UPS SYSTEMS [ 7.496712] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 7.496716] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 7.496718] usb 3-5.1: SerialNumber: ... [ 7.575917] usb 3-5.2: new high-speed USB device number 6 using ehci-pci [ 7.900690] usb 3-5.2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 7.900701] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 7.900707] usb 3-5.2: SerialNumber: ... [ 9.733171] hid-generic 0003:0463:FFFF.0003: hiddev1,hidraw2: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:12.0-1/input0 [ 10.031921] usb 8-2: new full-speed USB device number 3 using ohci-pci [ 10.226271] usb 8-2: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 10.226282] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.226288] usb 8-2: Product: USB Device [ 10.226292] usb 8-2: Manufacturer: COMPANY [ 10.232657] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:09DA:FAA8.0004/input/input5 [ 10.292326] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input0 [ 10.295600] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:09DA:FAA8.0005/input/input6 [ 10.295814] hid-generic 0003:09DA:FAA8.0005: input,hidraw4: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-2/input1 [ 10.299813] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:09DA:FAA8.0006/input/input7 [ 10.360046] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:09DA:FAA8.0006/input/input8 [ 10.360321] hid-generic 0003:09DA:FAA8.0006: input,hiddev2,hidraw5: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input2 [ 10.515894] raid6: sse2x4 gen() 12197 MB/s [ 10.583894] raid6: sse2x2 gen() 11408 MB/s [ 10.651894] raid6: sse2x1 gen() 7813 MB/s [ 10.651896] raid6: using algorithm sse2x4 gen() 12197 MB/s [ 10.719895] raid6: .... xor() 4547 MB/s, rmw enabled [ 10.719897] raid6: using ssse3x2 recovery algorithm [ 10.725554] xor: automatically using best checksumming function avx [ 10.731349] async_tx: api initialized (async) [ 11.025807] Btrfs loaded, zoned=yes, fsverity=yes [ 23.824339] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 23.824405] floppy: error 10 while reading block 0 [ 24.243311] EXT4-fs (sdb3): mounted filesystem HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 ro with ordered data mode. Quota mode: none. [ 24.610762] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 25.176594] random: crng init done [ 31.971012] loop: module loaded [ 32.213945] EXT4-fs (sdb3): re-mounted HASH_746-7EF2-E0CC-D784-D8D89BB9CB58 r/w. Quota mode: none. [ 32.468138] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 32.468188] device-mapper: uevent: version 1.0.3 [ 32.468321] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 33.981415] lp: driver loaded but no devices found [ 34.045814] ppdev: user-space parallel port driver [ 41.473535] acpi_cpufreq: overriding BIOS provided _PSD data [ 41.975458] cryptd: max_cpu_qlen set to 1000 [ 42.174283] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 42.272511] AVX version of gcm_enc/dec engaged. [ 42.272559] AES CTR mode by8 optimization enabled [ 42.794365] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 42.794419] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 42.794577] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 42.794630] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 42.794790] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 42.794841] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 42.930144] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 42.930256] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 42.930376] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 42.946998] mc: Linux media interface: v0.10 [ 43.375572] videodev: Linux video capture interface: v2.00 [ 44.177402] kvm_amd: TSC scaling supported [ 44.177407] kvm_amd: Nested Virtualization enabled [ 44.177409] kvm_amd: Nested Paging enabled [ 44.177414] kvm_amd: LBR virtualization supported [ 44.186201] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 44.186353] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 44.186361] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 44.272896] MCE: In-kernel MCE decoding enabled. [ 44.467857] Registered IR keymap rc-avermedia-m135a [ 44.565051] IR NEC protocol handler initialized [ 44.595914] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 44.596223] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 44.596276] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 44.759917] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 44.759932] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 44.759936] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 44.759939] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759942] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 44.759945] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759947] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759950] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759953] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759955] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759958] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759961] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759963] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759966] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759968] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 44.759971] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.263046] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 45.337783] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 45.341162] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 45.341346] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 45.341503] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 45.341662] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 45.341846] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 45.342027] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 45.470983] usb 3-5.1: Found UVC 1.00 device <unnamed> (046d:0825) [ 45.508655] usb 3-5.2: Found UVC 1.00 device <unnamed> (046d:0825) [ 45.519846] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 45.546383] usbcore: registered new interface driver uvcvideo [ 45.551572] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 45.551579] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.551583] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 45.551586] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 45.551588] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 45.551590] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 45.551592] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 45.551595] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 45.551597] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 45.569133] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 45.569255] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 45.569419] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 45.569534] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 45.569645] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 45.572866] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 45.573199] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 45.575561] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 45.651845] tda829x 13-004b: setting tuner address to 60 [ 46.263858] tda829x 13-004b: type set to tda8290+75a [ 47.025103] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 47.040005] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 47.040287] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 47.040565] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 47.040843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 47.380058] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 47.463160] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 47.683787] usb 3-5.1: set resolution quirk: cval->res = 384 [ 48.030451] usb 5-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 48.030465] usb 5-1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 48.030471] usb 5-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 48.206133] usb 5-1: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 48.206484] usb 5-1: Firmware revision 11.1 (signature 0x88e1) [ 48.798326] usbcore: registered new interface driver rtl8xxxu [ 48.919226] rtl8xxxu 5-1:1.0 wlxd037459855f3: renamed from wlan0 [ 49.063930] usb 3-5.2: set resolution quirk: cval->res = 384 [ 49.064877] usbcore: registered new interface driver snd-usb-audio [ 50.093554] alsactl[1372]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 50.564544] saa7134: saa7133[0]: registered device video4 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 50.564769] saa7134: saa7133[0]: registered device radio0 [ 50.591927] rc rc0: two consecutive events of type space [ 50.646269] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 50.646339] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 56.947241] Process accounting resumed [ 59.069040] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 81.557142] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, half duplex [ 81.557174] tg3 0000:06:00.0 enp6s0: Flow control is off for TX and off for RX [ 81.557184] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 81.565105] NET: Registered PF_QIPCRTR protocol family [ 81.666321] tg3 0000:06:00.0 enp6s0: Link is down [ 83.239626] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 [ 83.244973] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 83.248461] wlxd037459855f3: authenticated [ 83.256045] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 83.261356] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=5) [ 83.263188] usb 5-1: rtl8xxxu_bss_info_changed: HT supported [ 83.265448] wlxd037459855f3: associated [ 83.268348] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 94.732285] usb 3-5.1: reset high-speed USB device number 5 using ehci-pci [ 173.249823] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 181.374338] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 189.606727] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 197.675061] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 204.351374] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 208.483788] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 356.041414] Process accounting resumed [ 3043.254591] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 3043.254609] floppy: error 10 while reading block 0 [ 3389.405601] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 3389.405618] floppy: error 10 while reading block 0 [ 4789.677890] usb 3-5.1: reset high-speed USB device number 5 using ehci-pci [ 4790.169915] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 4800.946064] usb 3-5.1: reset high-speed USB device number 5 using ehci-pci [ 4802.426169] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 4809.002261] usb 3-5.1: reset high-speed USB device number 5 using ehci-pci [ 4809.494312] usb 3-5.2: reset high-speed USB device number 6 using ehci-pci [ 5724.189135] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING)