[ 0.000000] Linux version 6.11.5+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.238 MHz processor [ 0.002608] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002612] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008925] AGP: No AGP bridge found [ 0.008984] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008990] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008993] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010759] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010768] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016250] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.017752] RAMDISK: [mem 0x28fe5000-0x307e9fff] ACPI: Early table checksum verification disabled [ 0.017764] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017769] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017776] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017782] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240322/tbfadt-611) [ 0.017787] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017792] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017795] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017800] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017804] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017808] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017812] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017816] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017820] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017823] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017908] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.018316] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.018324] Movable zone start for each node [ 0.018327] Early memory node ranges [ 0.018328] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018391] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.028325] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.028351] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.028367] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.029284] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.029350] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029579] ACPI: PM-Timer IO Port: 0x808 [ 0.029590] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029599] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029602] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029605] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029608] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029612] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029614] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029624] CPU topo: Max. logical packages: 1 [ 0.029625] CPU topo: Max. logical dies: 1 [ 0.029626] CPU topo: Max. dies per package: 1 [ 0.029632] CPU topo: Max. threads per core: 1 [ 0.029633] CPU topo: Num. cores per package: 8 [ 0.029634] CPU topo: Num. threads per package: 8 [ 0.029635] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.029655] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029691] Booting paravirtualized kernel on bare hardware [ 0.029693] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035306] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.036418] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.036428] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.036431] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.036456] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.036514] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64", will be passed to user space. [ 0.043165] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.046522] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.046617] Fallback order for Node 0: 0 [ 0.046623] Built 1 zonelists, mobility grouping on. Total pages: 6279895 [ 0.046625] Policy zone: Normal [ 0.046637] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.046639] AGP: Checking aperture... [ 0.052943] AGP: No AGP bridge found [ 0.052945] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.052948] Aperture pointing to e820 RAM. Ignoring. [ 0.052949] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052950] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052951] AGP: This costs you 64MB of RAM [ 0.052953] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052957] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.109539] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.109756] ftrace: allocating 45176 entries in 177 pages [ 0.123557] ftrace: allocated 177 pages with 4 groups [ 0.124783] Dynamic Preempt: voluntary [ 0.125032] rcu: Preemptible hierarchical RCU implementation. [ 0.125033] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.125035] Trampoline variant of Tasks RCU enabled. [ 0.125035] Rude variant of Tasks RCU enabled. [ 0.125036] Tracing variant of Tasks RCU enabled. [ 0.125037] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.125038] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125049] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.125052] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.125055] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.129590] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129811] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.129913] spurious 8259A interrupt: IRQ7. [ 0.133221] Console: colour VGA+ 80x25 [ 0.133224] printk: legacy console [tty0] enabled [ 0.133492] ACPI: Core revision 20240322 [ 0.133661] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133676] APIC: Switch to symmetric I/O mode setup [ 0.134026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153677] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c965437400, max_idle_ns: 440795360075 ns [ 0.153684] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.47 BogoMIPS (lpj=12372952) [ 0.153715] LVT offset 1 assigned for vector 0xf9 [ 0.153721] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.153723] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.153728] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153731] Spectre V2 : Mitigation: Retpolines [ 0.153732] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153733] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.153734] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.153735] RETBleed: Mitigation: untrained return thunk [ 0.153738] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153740] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153744] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153746] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153747] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153749] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153752] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.184085] Freeing SMP alternatives memory: 40K [ 0.184091] pid_max: default: 32768 minimum: 301 [ 0.184936] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm [ 0.185180] landlock: Up and running. [ 0.185182] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.185219] AppArmor: AppArmor initialized [ 0.185222] TOMOYO Linux initialized [ 0.185229] LSM support for eBPF active [ 0.185616] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.185706] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.299657] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.300031] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.300059] ... version: 0 [ 0.300061] ... bit width: 48 [ 0.300062] ... generic registers: 6 [ 0.300063] ... value mask: 0000ffffffffffff [ 0.300064] ... max period: 00007fffffffffff [ 0.300065] ... fixed-purpose events: 0 [ 0.300066] ... event mask: 000000000000003f [ 0.300191] signal: max sigframe size: 1776 [ 0.300256] rcu: Hierarchical SRCU implementation. [ 0.300257] rcu: Max phase no-delay instances is 1000. [ 0.300327] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.301680] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.301680] smp: Bringing up secondary CPUs ... [ 0.301826] smpboot: x86: Booting SMP configuration: [ 0.301827] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.333740] smp: Brought up 1 node, 8 CPUs [ 0.333740] smpboot: Total of 8 processors activated (49491.80 BogoMIPS) [ 0.387731] node 0 deferred pages initialised in 52ms [ 0.389726] Memory: 24366220K/25119580K available (16384K kernel code, 2431K rwdata, 11136K rodata, 4136K init, 5240K bss, 745256K reserved, 0K cma-reserved) [ 0.391044] devtmpfs: initialized [ 0.391044] x86/mm: Memory block size: 128MB [ 0.396634] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.396634] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.396634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.396634] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.396634] pinctrl core: initialized pinctrl subsystem [ 0.398743] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.399584] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.400298] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.401055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.401100] thermal_sys: Registered thermal governor 'fair_share' [ 0.401100] thermal_sys: Registered thermal governor 'bang_bang' [ 0.401100] thermal_sys: Registered thermal governor 'step_wise' [ 0.401100] thermal_sys: Registered thermal governor 'user_space' [ 0.401100] thermal_sys: Registered thermal governor 'power_allocator' [ 0.401100] cpuidle: using governor ladder [ 0.401100] cpuidle: using governor menu [ 0.401100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.401954] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.401963] PCI: Using configuration type 1 for base access [ 0.401964] PCI: Using configuration type 1 for extended access [ 0.402025] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.402026] mtrr: probably your BIOS does not setup all CPUs. [ 0.402027] mtrr: corrected configuration. [ 0.402088] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.403700] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.403700] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.403700] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.403700] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.407012] ACPI: Added _OSI(Module Device) [ 0.407012] ACPI: Added _OSI(Processor Device) [ 0.407012] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.407012] ACPI: Added _OSI(Processor Aggregator Device) [ 0.411016] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.425952] ACPI: Interpreter enabled [ 0.425971] ACPI: PM: (supports S0 S3 S4 S5) [ 0.425973] ACPI: Using IOAPIC for interrupt routing [ 0.426123] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.426187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.426190] PCI: Using E820 reservations for host bridge windows [ 0.426343] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.435500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.435507] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.435895] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.436061] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.436074] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 0.436118] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.436214] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.436226] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 0.436266] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.436364] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.436377] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 0.436416] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.436509] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.436522] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 0.436559] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.436657] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.436669] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 0.436709] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.436804] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.436816] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 0.436856] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.436962] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.436976] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.437137] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.437151] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.437302] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.437365] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.437456] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.437470] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.437632] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.437704] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.437805] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.437943] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.437957] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.438004] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.438006] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.438008] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.438095] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.438112] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.438252] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.438401] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.438425] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.438431] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.438544] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.438680] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.438823] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.438885] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.438973] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.439031] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.439089] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.439144] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.439205] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.439268] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.439367] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.439382] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.439445] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.439496] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.439555] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.439645] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.439659] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.439734] pci 0000:01:00.1: supports D1 D2 [ 0.439828] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f PCIe Legacy Endpoint [ 0.439890] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.439990] pci 0000:02:00.0: PME# supported from D3hot [ 0.440074] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.440139] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.440222] pci 0000:03:00.0: supports D1 D2 [ 0.440223] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.440324] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.440394] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.440478] pci 0000:04:00.0: supports D1 D2 [ 0.440480] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.440581] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.440658] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.440747] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.440856] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.440871] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.440975] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.449743] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.449825] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.450101] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 0.450154] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.450172] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.450333] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.450340] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.450343] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.450345] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.450347] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.450349] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.450350] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.451174] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.451238] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.451304] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.451370] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.451424] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.451468] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.451512] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.451555] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.451752] iommu: Default domain type: Translated [ 0.451752] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.451752] pps_core: LinuxPPS API ver. 1 registered [ 0.451752] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.451752] PTP clock support registered [ 0.451752] EDAC MC: Ver: 3.0.0 [ 0.451752] NetLabel: Initializing [ 0.451752] NetLabel: domain hash size = 128 [ 0.451752] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.451752] NetLabel: unlabeled traffic allowed by default [ 0.451752] PCI: Using ACPI for IRQ routing [ 0.458866] PCI: pci_cache_line_size set to 64 bytes [ 0.458928] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.458961] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.458961] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.458961] vgaarb: loaded [ 0.458961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.458961] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.459838] clocksource: Switched to clocksource tsc-early [ 0.459845] VFS: Disk quotas dquot_6.6.0 [ 0.459845] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.459845] AppArmor: AppArmor Filesystem Enabled [ 0.459845] pnp: PnP ACPI init [ 0.459845] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459845] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.459845] system 00:03: [io 0x040b] has been reserved [ 0.459845] system 00:03: [io 0x04d6] has been reserved [ 0.459845] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.459845] system 00:03: [io 0x0c14] has been reserved [ 0.459845] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.459845] system 00:03: [io 0x0c52] has been reserved [ 0.459845] system 00:03: [io 0x0c6c] has been reserved [ 0.459845] system 00:03: [io 0x0c6f] has been reserved [ 0.459845] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.459845] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.459845] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.459845] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.459845] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.459845] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.459845] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.459845] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.459845] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.459845] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.459845] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.459845] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.459845] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.459845] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.459845] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.459845] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.459845] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.459845] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.459868] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.460397] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.467892] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.468192] NET: Registered PF_INET protocol family [ 0.468583] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.486852] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.486913] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.487268] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.487914] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.488189] TCP: Hash tables configured (established 262144 bind 65536) [ 0.488511] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.488696] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.488837] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.488981] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.488994] NET: Registered PF_XDP protocol family [ 0.489018] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 24530 usecs [ 0.534308] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.554305] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19332 usecs [ 0.574305] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19520 usecs [ 0.574542] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.574907] PCI: CLS 64 bytes, default 64 [ 0.575009] Trying to unpack rootfs image as initramfs... [ 0.575490] PCI-DMA: Disabling AGP. [ 0.575568] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.575570] PCI-DMA: using GART IOMMU. [ 0.575572] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.576444] software IO TLB: tearing down default memory pool [ 0.579010] LVT offset 0 assigned for vector 0x400 [ 0.579149] perf: AMD IBS detected (0x000000ff) [ 0.586062] amd_uncore: 4 amd_nb counters detected [ 0.592935] Initialise system trusted keyrings [ 0.592949] Key type blacklist registered [ 0.593043] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.593052] zbud: loaded [ 0.593476] fuse: init (API version 7.40) [ 0.593834] integrity: Platform Keyring initialized [ 0.593841] integrity: Machine keyring initialized [ 0.611673] Key type asymmetric registered [ 0.611676] Asymmetric key parser 'x509' registered [ 1.603887] tsc: Refined TSC clocksource calibration: 3093.304 MHz [ 1.603912] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969257c06, max_idle_ns: 440795235033 ns [ 1.625863] Freeing initrd memory: 122900K [ 1.625892] clocksource: Switched to clocksource tsc [ 1.632484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.632560] io scheduler mq-deadline registered [ 1.635466] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.635670] ACPI: \_PR_.P001: Found 2 idle states [ 1.635763] ACPI: \_PR_.P002: Found 2 idle states [ 1.635884] ACPI: \_PR_.P003: Found 2 idle states [ 1.635999] ACPI: \_PR_.P004: Found 2 idle states [ 1.636132] ACPI: \_PR_.P005: Found 2 idle states [ 1.636253] ACPI: \_PR_.P006: Found 2 idle states [ 1.636371] ACPI: \_PR_.P007: Found 2 idle states [ 1.636519] ACPI: \_PR_.P008: Found 2 idle states [ 1.636898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.637090] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.637885] Linux agpgart interface v0.103 [ 1.638918] i8042: PNP: No PS/2 controller found. [ 1.638997] mousedev: PS/2 mouse device common for all mice [ 1.639030] rtc_cmos 00:06: RTC can wake from S4 [ 1.639260] rtc_cmos 00:06: registered as rtc0 [ 1.639284] rtc_cmos 00:06: setting system clock to 2024-12-12T15:07:53 UTC (1734016073) [ 1.639314] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.639330] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.639572] ledtrig-cpu: registered to indicate activity on CPUs [ 1.640129] NET: Registered PF_INET6 protocol family [ 1.646117] Segment Routing with IPv6 [ 1.646137] In-situ OAM (IOAM) with IPv6 [ 1.646161] mip6: Mobile IPv6 [ 1.646165] NET: Registered PF_PACKET protocol family [ 1.646244] mpls_gso: MPLS GSO support [ 1.646258] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.646758] microcode: Current revision: 0x0600063e [ 1.646760] microcode: Updated early from: 0x06000626 [ 1.646917] IPI shorthand broadcast: enabled [ 1.649723] sched_clock: Marking stable (1644015789, 3848439)->(1665316268, -17452040) [ 1.650001] registered taskstats version 1 [ 1.650173] Loading compiled-in X.509 certificates [ 1.677843] Loaded X.509 cert 'Build time autogenerated kernel key: bffebb35c9065925e3b2ba6063b8020c5a36de11' [ 1.680848] Demotion targets for Node 0: null [ 1.681140] Key type .fscrypt registered [ 1.681141] Key type fscrypt-provisioning registered [ 1.705002] Key type encrypted registered [ 1.705009] AppArmor: AppArmor sha256 policy hashing enabled [ 1.705020] ima: No TPM chip found, activating TPM-bypass! [ 1.705023] ima: Allocated hash algorithm: sha256 [ 1.705034] ima: No architecture policies found [ 1.705063] evm: Initialising EVM extended attributes: [ 1.705065] evm: security.selinux [ 1.705066] evm: security.SMACK64 (disabled) [ 1.705067] evm: security.SMACK64EXEC (disabled) [ 1.705068] evm: security.SMACK64TRANSMUTE (disabled) [ 1.705069] evm: security.SMACK64MMAP (disabled) [ 1.705070] evm: security.apparmor [ 1.705071] evm: security.ima [ 1.705072] evm: security.capability [ 1.705073] evm: HMAC attrs: 0x1 [ 1.881502] RAS: Correctable Errors collector initialized. [ 1.895760] clk: Disabling unused clocks [ 1.895763] PM: genpd: Disabling unused power domains [ 1.898835] Freeing unused decrypted memory: 2028K [ 1.899941] Freeing unused kernel image (initmem) memory: 4136K [ 1.899963] Write protecting the kernel read-only data: 28672k [ 1.900620] Freeing unused kernel image (rodata/data gap) memory: 1152K [ 1.963194] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.963200] Run /init as init process [ 1.963201] with arguments: [ 1.963202] /init [ 1.963204] with environment: [ 1.963204] HOME=/ [ 1.963205] TERM=linux [ 1.963206] BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 [ 2.110536] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.110592] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.120107] Floppy drive(s): fd0 is 1.44M [ 2.127964] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.127976] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.129064] ACPI: button: Power Button [PWRF] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.135297] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.135880] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 2.136452] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 2.136570] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.145886] FDC 0 is a post-1991 82077 [ 2.147256] SCSI subsystem initialized [ 2.164770] ACPI: bus type USB registered [ 2.164817] usbcore: registered new interface driver usbfs [ 2.164842] usbcore: registered new interface driver hub [ 2.164871] usbcore: registered new device driver usb [ 2.192168] ACPI: bus type drm_connector registered [ 2.202644] libata version 3.00 loaded. [ 2.204874] QUIRK: Enable AMD PLL fix [ 2.204905] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.204913] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.204918] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.204926] ehci-pci 0000:00:12.2: debug port 1 [ 2.204968] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.205032] pata_via 0000:05:00.1: version 0.3.4 [ 2.206144] scsi host0: pata_via [ 2.206956] scsi host1: pata_via [ 2.207027] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 2.207033] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 2.212960] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.212967] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.212970] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] scsi host2: pata_atiixp [ 2.213296] scsi host3: pata_atiixp [ 2.213357] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.213360] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.219880] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.219953] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.219957] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.219960] usb usb1: Product: EHCI Host Controller [ 2.219962] usb usb1: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.219963] usb usb1: SerialNumber: ... [ 2.220194] hub 1-0:1.0: USB hub found [ 2.220205] hub 1-0:1.0: 5 ports detected [ 2.220432] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.220437] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.220441] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.220449] ehci-pci 0000:00:13.2: debug port 1 [ 2.220477] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.239876] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.239944] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.240011] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.240015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.240017] usb usb2: Product: EHCI Host Controller [ 2.240019] usb usb2: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.240021] usb usb2: SerialNumber: ... [ 2.240178] hub 2-0:1.0: USB hub found [ 2.240188] hub 2-0:1.0: 5 ports detected [ 2.240410] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.240415] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.240419] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.240427] ehci-pci 0000:00:16.2: debug port 1 [ 2.240454] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.259882] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.259950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.259954] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.259956] usb usb3: Product: EHCI Host Controller [ 2.259958] usb usb3: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.259960] usb usb3: SerialNumber: ... [ 2.260110] hub 3-0:1.0: USB hub found [ 2.260119] hub 3-0:1.0: 4 ports detected [ 2.387534] ata3.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.387540] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.387546] ata3.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.387549] ata3.00: limited to UDMA/33 due to 40-wire cable [ 2.387551] ata3.01: limited to UDMA/33 due to 40-wire cable [ 2.499959] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.515957] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.536309] scsi 2:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.537561] scsi 2:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.578312] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.578901] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.578916] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.578944] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.579900] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.579908] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.579963] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080090 [ 2.580178] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.580182] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 2.580185] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.580240] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.580244] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.580246] usb usb5: Product: xHCI Host Controller [ 2.580248] usb usb5: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.580250] usb usb5: SerialNumber: ... [ 2.580482] hub 5-0:1.0: USB hub found [ 2.580497] hub 5-0:1.0: 2 ports detected [ 2.580724] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.580771] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 2.580775] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.580778] usb usb6: Product: xHCI Host Controller [ 2.580781] usb usb6: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.580783] usb usb6: SerialNumber: ... [ 2.580866] ahci 0000:00:11.0: version 3.0 [ 2.581167] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.581171] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.581174] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.581943] hub 6-0:1.0: USB hub found [ 2.581958] hub 6-0:1.0: 2 ports detected [ 2.582220] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.582227] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.582294] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080090 [ 2.582476] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.582481] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.582485] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.582527] scsi host4: ahci [ 2.582683] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.582687] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.582690] usb usb7: Product: xHCI Host Controller [ 2.582692] usb usb7: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.582694] usb usb7: SerialNumber: ... [ 2.582808] scsi host5: ahci [ 2.582988] scsi host6: ahci [ 2.583077] hub 7-0:1.0: USB hub found [ 2.583088] hub 7-0:1.0: 2 ports detected [ 2.583228] scsi host7: ahci [ 2.583311] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.583314] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.583317] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.583320] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.583468] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.583507] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 2.583510] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.583513] usb usb8: Product: xHCI Host Controller [ 2.583515] usb usb8: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.583517] usb usb8: SerialNumber: ... [ 2.583658] hub 8-0:1.0: USB hub found [ 2.583678] hub 8-0:1.0: 2 ports detected [ 2.583865] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, IDE mode [ 2.583870] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.583872] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.584394] scsi host8: ahci [ 2.584720] scsi host9: ahci [ 2.584806] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.584810] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.586652] sd 2:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.586666] sd 2:0:0:0: [sda] Write Protect is off [ 2.586669] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.586688] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.586722] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.608305] sda: sda1 sda2 sda3 [ 2.608525] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.640168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.640172] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.640175] usb usb4: Product: OHCI PCI host controller [ 2.640176] usb usb4: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.640177] usb usb4: SerialNumber: ... [ 2.640329] hub 4-0:1.0: USB hub found [ 2.640339] hub 4-0:1.0: 5 ports detected [ 2.640748] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.640754] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.640783] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.676931] usb 3-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.676935] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.676937] usb 3-1: Product: 802.11n NIC [ 2.676939] usb 3-1: Manufacturer: Realtek [ 2.676940] usb 3-1: SerialNumber: ... [ 2.704076] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.704081] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.704084] usb usb9: Product: OHCI PCI host controller [ 2.704086] usb usb9: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.704087] usb usb9: SerialNumber: ... [ 2.704255] hub 9-0:1.0: USB hub found [ 2.704274] hub 9-0:1.0: 5 ports detected [ 2.704636] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.704647] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.704668] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.760193] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.767983] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.767988] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.767990] usb usb10: Product: OHCI PCI host controller [ 2.767991] usb usb10: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.767993] usb usb10: SerialNumber: ... [ 2.768268] hub 10-0:1.0: USB hub found [ 2.768279] hub 10-0:1.0: 2 ports detected [ 2.768588] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.768594] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.768619] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.832053] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.832057] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.832060] usb usb11: Product: OHCI PCI host controller [ 2.832061] usb usb11: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.832063] usb usb11: SerialNumber: ... [ 2.832277] hub 11-0:1.0: USB hub found [ 2.832287] hub 11-0:1.0: 4 ports detected [ 2.872775] usb 2-1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 2.872787] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.872794] usb 2-1: SerialNumber: ... [ 2.899750] ata10: SATA link down (SStatus 0 SControl 330) [ 2.899765] ata7: SATA link down (SStatus 0 SControl 300) [ 2.908021] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 3.059987] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.060031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.060031] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.060085] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.060212] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 3.060253] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.060365] ata6.00: configured for UDMA/133 [ 3.061042] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.061280] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.061921] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.062406] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 3.062596] ata9.00: configured for UDMA/133 [ 3.062681] ata8.00: configured for UDMA/133 [ 3.063050] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.064840] ata5.00: configured for UDMA/133 [ 3.065171] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.065674] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.065679] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.065690] sd 4:0:0:0: [sdb] Write Protect is off [ 3.065693] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.065711] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.065743] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.070732] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 3.071163] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.071178] sd 5:0:0:0: [sdc] Write Protect is off [ 3.071181] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.071209] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.071249] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.075094] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.103302] usb 4-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.103314] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.103321] usb 4-1: Product: USB Device [ 3.103325] usb 4-1: Manufacturer: COMPANY [ 3.116293] sdc: sdc1 sdc2 [ 3.116502] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.121104] sdb: sdb1 sdb2 sdb3 [ 3.121348] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.142190] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.142554] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.142558] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.142573] sd 8:0:0:0: [sdd] Write Protect is off [ 3.142576] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.142594] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.142626] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.184994] sdd: sdd1 sdd2 [ 3.185203] sd 8:0:0:0: [sdd] Attached SCSI disk [ 3.208898] hid: raw HID events driver (C) Jiri Kosina [ 3.229423] usbcore: registered new interface driver usbhid [ 3.229428] usbhid: USB HID core driver [ 3.232586] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.235877] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 3.251053] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.251068] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.388101] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.388326] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 3.388433] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.388785] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 3.448073] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.448229] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.505010] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 3.619965] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 3.718004] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.774109] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.908255] usb 4-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.908261] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.908264] usb 4-2: Product: A4Tech Gaming Mouse [ 3.908266] usb 4-2: Manufacturer: PixArt [ 3.914540] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:09DA:3519.0004/input/input6 [ 3.914641] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.918691] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:09DA:3519.0005/input/input8 [ 3.976126] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 4.807113] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.807118] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.807120] usb 9-2: Product: NOVA AVR [ 4.807122] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 7.339931] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 7.370748] [drm] amdgpu kernel modesetting enabled. [ 7.370897] amdgpu: Virtual CRAT table created for CPU [ 7.370916] amdgpu: Topology: Add CPU node [ 7.371196] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.371224] [drm] register mmio base: 0xFEA00000 [ 7.371225] [drm] register mmio size: 262144 [ 7.371291] [drm] add ip block number 0 <vi_common> [ 7.371294] [drm] add ip block number 1 <gmc_v8_0> [ 7.371295] [drm] add ip block number 2 <tonga_ih> [ 7.371297] [drm] add ip block number 3 <gfx_v8_0> [ 7.371298] [drm] add ip block number 4 <sdma_v3_0> [ 7.371299] [drm] add ip block number 5 <powerplay> [ 7.371301] [drm] add ip block number 6 <dm> [ 7.371302] [drm] add ip block number 7 <uvd_v6_0> [ 7.371303] [drm] add ip block number 8 <vce_v3_0> [ 7.371488] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 7.371546] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.371550] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.371863] [drm] UVD is enabled in VM mode [ 7.371865] [drm] UVD ENC is enabled in VM mode [ 7.371867] [drm] VCE enabled in VM mode [ 7.371906] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.372977] Console: switching to colour dummy device 80x25 [ 7.372982] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.372984] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.373009] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.373273] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.373276] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.373282] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.373283] [drm] RAM width 256bits GDDR5 [ 7.373466] [drm] amdgpu: 8192M of VRAM memory ready [ 7.373469] [drm] amdgpu: 11997M of GTT memory ready. [ 7.373487] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.373890] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.375011] [drm] Chained IB support enabled! [ 7.379845] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.382781] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.384663] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.687962] usb 1-5: new high-speed USB device number 4 using ehci-pci [ 7.696927] [drm] Display Core v3.2.291 initialized on DCE 11.2 [ 7.758541] [drm] UVD and UVD ENC initialized successfully. [ 7.844267] usb 1-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 7.844273] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 7.844561] hub 1-5:1.0: USB hub found [ 7.844639] hub 1-5:1.0: 2 ports detected [ 7.868470] [drm] VCE initialized successfully. [ 7.868545] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.868559] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.872252] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.873088] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 7.890067] fbcon: amdgpudrmfb (fb0) is primary device [ 7.980917] Console: switching to colour frame buffer device 160x64 [ 8.014863] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.259930] raid6: sse2x4 gen() 12306 MB/s [ 8.327928] raid6: sse2x2 gen() 11359 MB/s [ 8.395930] raid6: sse2x1 gen() 7833 MB/s [ 8.395932] raid6: using algorithm sse2x4 gen() 12306 MB/s [ 8.463928] raid6: .... xor() 4571 MB/s, rmw enabled [ 8.463930] raid6: using ssse3x2 recovery algorithm [ 8.465783] xor: automatically using best checksumming function avx [ 8.467210] async_tx: api initialized (async) [ 8.801623] Btrfs loaded, zoned=yes, fsverity=yes [ 21.633006] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 21.633084] floppy: error 10 while reading block 0 [ 21.961534] EXT4-fs (sda2): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 22.067138] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.809691] loop: module loaded [ 22.825716] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 22.825762] device-mapper: uevent: version 1.0.3 [ 22.825878] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 22.862353] lp: driver loaded but no devices found [ 22.863670] EXT4-fs (sda2): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. Quota mode: none. [ 22.871358] ppdev: user-space parallel port driver [ 23.307888] random: crng init done [ 23.490316] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 23.492407] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 23.512837] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 23.517951] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 23.518504] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 23.520935] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 23.623202] acpi_cpufreq: overriding BIOS provided _PSD data [ 23.641845] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 23.992564] cryptd: max_cpu_qlen set to 1000 [ 23.995516] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 23.995667] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 23.998927] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.020838] AES CTR mode by8 optimization enabled [ 24.033443] at24 0-0050: supply vcc not found, using dummy regulator [ 24.037008] at24 0-0050: 256 byte spd EEPROM, read-only [ 24.037064] at24 0-0051: supply vcc not found, using dummy regulator [ 24.043379] at24 0-0051: 256 byte spd EEPROM, read-only [ 24.043523] at24 0-0052: supply vcc not found, using dummy regulator [ 24.046536] at24 0-0052: 256 byte spd EEPROM, read-only [ 24.046583] at24 0-0053: supply vcc not found, using dummy regulator [ 24.048446] mc: Linux media interface: v0.10 [ 24.050687] at24 0-0053: 256 byte spd EEPROM, read-only [ 24.133406] videodev: Linux video capture interface: v2.00 [ 24.169648] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 24.213207] usb 2-1: Found UVC 1.00 device <unnamed> (046d:0825) [ 24.214487] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 24.225528] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 24.225723] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 24.225733] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 24.237150] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 24.237751] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 24.241083] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 24.241193] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 24.241354] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 24.242732] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 24.247303] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 24.247311] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.247314] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 24.247318] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 24.247320] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 24.247323] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 24.247325] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 24.247328] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 24.247330] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 24.258356] usbcore: registered new interface driver uvcvideo [ 24.271998] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 24.272112] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 24.272217] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 24.272329] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 24.272454] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 24.272555] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 24.272672] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 24.272865] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 24.311867] Registered IR keymap rc-avermedia-m135a [ 24.344565] IR NEC protocol handler initialized [ 24.346262] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 24.346584] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 24.346886] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 24.347183] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 24.347471] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 24.372798] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 24.372858] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 24.372915] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input16 [ 24.535867] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 24.535874] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 24.535876] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 24.535878] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535880] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 24.535881] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535883] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535884] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535886] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535887] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535889] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535890] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535891] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535893] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535894] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.535895] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.579543] kvm_amd: TSC scaling supported [ 24.579548] kvm_amd: Nested Virtualization enabled [ 24.579549] kvm_amd: Nested Paging enabled [ 24.579551] kvm_amd: LBR virtualization supported [ 24.594326] MCE: In-kernel MCE decoding enabled. [ 24.631879] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 24.759341] usb 3-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 24.759357] usb 3-1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 24.759363] usb 3-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 24.760715] usb 3-1: Firmware revision 28.0 (signature 0x88e1) [ 24.767958] tda829x 13-004b: setting tuner address to 60 [ 24.871902] tda829x 13-004b: type set to tda8290+75a [ 25.346478] usbcore: registered new interface driver rtl8xxxu [ 25.357877] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 [ 25.639821] usb 2-1: set resolution quirk: cval->res = 384 [ 25.641178] usbcore: registered new interface driver snd-usb-audio [ 29.128693] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 29.128906] saa7134: saa7133[0]: registered device radio0 [ 29.150800] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 29.150850] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 34.077681] Process accounting resumed [ 34.362664] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 35.092470] NET: Registered PF_QIPCRTR protocol family [ 36.887660] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 36.892925] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 36.892930] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 36.896060] wlxd037459855f3: authenticated [ 36.899991] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 36.902898] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 36.904669] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 36.906930] wlxd037459855f3: associated [ 37.126521] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 38.777856] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 38.777890] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 38.777906] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 40.160055] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 50.944107] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 59.144160] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 63.806728] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 70.543426] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 74.177746] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 74.566650] panel-8-pulseau[3441]: segfault at 0 ip 00007f9be830c4c4 sp 00007ffed459a118 error 4 in libglib-2.0.so.0.7800.4[474c4,7f9be82e3000+99000] likely on CPU 6 (core 6, socket 1) [ 74.566682] Code: 84 00 00 00 00 00 f3 0f 1e fa 48 83 ec 08 e8 a3 75 fd ff 85 c0 0f 94 c0 48 83 c4 08 0f b6 c0 c3 66 0f 1f 44 00 00 f3 0f 1e fa <0f> be 17 b8 05 15 00 00 84 d2 74 18 89 c1 48 83 c7 01 c1 e1 05 01 [ 129.753879] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 129.759220] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 129.759231] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 129.766291] wlxd037459855f3: authenticated [ 129.767872] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 129.773001] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 129.774821] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 129.777083] wlxd037459855f3: associated [ 130.067507] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 138.157263] wlxd037459855f3: deauthenticated from C23ADE89DD8893CF35F25ACBC4310040 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 139.368492] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 139.373812] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 139.373820] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 139.375710] wlxd037459855f3: authenticated [ 139.382760] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 139.390748] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 139.392548] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 139.394804] wlxd037459855f3: associated [ 139.488426] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 143.988485] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 145.427487] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 145.432802] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 145.432817] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 145.434550] wlxd037459855f3: authenticated [ 145.438154] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 145.440788] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 145.442524] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 145.444785] wlxd037459855f3: associated [ 145.530054] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 153.773488] wlxd037459855f3: deauthenticated from C23ADE89DD8893CF35F25ACBC4310040 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 164.150828] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 164.156186] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 164.156200] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 164.357059] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 2/3) [ 164.359895] wlxd037459855f3: authenticated [ 164.361119] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 164.370141] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 164.371897] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 164.374165] wlxd037459855f3: associated [ 164.576886] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 199.799686] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 199.805023] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 199.805031] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 199.812099] wlxd037459855f3: authenticated [ 199.817826] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 199.824358] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 199.826136] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 199.828390] wlxd037459855f3: associated [ 200.520201] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 208.046698] wlxd037459855f3: deauthenticated from C23ADE89DD8893CF35F25ACBC4310040 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 209.316624] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 209.321886] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 209.321894] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 209.327160] wlxd037459855f3: authenticated [ 209.330762] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 209.338485] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 209.340251] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 209.342515] wlxd037459855f3: associated [ 209.531616] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 213.550913] wlxd037459855f3: deauthenticated from C23ADE89DD8893CF35F25ACBC4310040 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 234.410228] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 234.415604] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 234.415616] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 234.420983] wlxd037459855f3: authenticated [ 234.428279] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 234.434344] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 234.436076] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 234.438353] wlxd037459855f3: associated [ 234.620092] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 242.863534] wlxd037459855f3: deauthenticated from C23ADE89DD8893CF35F25ACBC4310040 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 253.250111] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 253.255338] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 253.255344] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 253.258342] wlxd037459855f3: authenticated [ 253.261100] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 253.264345] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 253.266085] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 253.268339] wlxd037459855f3: associated [ 253.359633] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 258.990957] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 267.479981] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 267.485347] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 267.485360] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 267.486605] wlxd037459855f3: authenticated [ 267.493842] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 267.501907] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 267.503702] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 267.505964] wlxd037459855f3: associated [ 267.593770] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 334.130803] Process accounting resumed [ 433.047180] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 433.619090] watchdog: watchdog0: watchdog did not stop!