[ 0.000000] Linux version 6.1.0-18-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 root=UUID=HASH_B40-5DEB-8CD9-9BA6-F49CE2C50911 ro amd_iommu=on quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba5e2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba5e3000-0x00000000ba766fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba767000-0x00000000ba776fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ba777000-0x00000000bb4dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb4db000-0x00000000bc9e4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc9e5000-0x00000000bca4efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bca4f000-0x00000000bca4ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bca50000-0x00000000bcc55fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcc56000-0x00000000bd082fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.10 by American Megatrends [ 0.000000] efi: ACPI=0xba76f000 ACPI 2.0=0xba76f000 SMBIOS=0xf04c0 MOKvar=0xbc207000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 LE R2.0, BIOS 1503 01/11/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4013.430 MHz processor [ 0.001221] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001224] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.007434] AGP: No AGP bridge found [ 0.007491] last_pfn = 0x83f000 max_arch_pfn = 0x400000000 [ 0.008315] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008476] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved [ 0.008484] last_pfn = 0xbd800 max_arch_pfn = 0x400000000 [ 0.012711] Using GB pages for direct mapping [ 0.013265] RAMDISK: [mem 0x2fb8d000-0x33dbdfff] ACPI: Early table checksum verification disabled [ 0.013274] ACPI: RSDP 0x00000000BA76F000 000024 (v02 ALASKA) [ 0.013278] ACPI: XSDT 0x00000000BA76F078 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.013284] ACPI: FACP 0x00000000BA775EC0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.013288] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20220331/tbfadt-615) [ 0.013293] ACPI: DSDT 0x00000000BA76F170 006D50 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.013297] ACPI: FACS 0x00000000BB4D5F80 000040 [ 0.013299] ACPI: APIC 0x00000000BA775FD0 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.013303] ACPI: FPDT 0x00000000BA776070 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.013306] ACPI: MCFG 0x00000000BA7760B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.013309] ACPI: HPET 0x00000000BA7760F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.013313] ACPI: SSDT 0x00000000BA776288 000304 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.013316] ACPI: IVRS 0x00000000BA776188 0000C8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.013319] ACPI: BGRT 0x00000000BA776250 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.013322] ACPI: Reserving FACP table memory at [mem 0xba775ec0-0xba775fcb] ACPI: Reserving DSDT table memory at [mem 0xba76f170-0xba775ebf] ACPI: Reserving FACS table memory at [mem 0xbb4d5f80-0xbb4d5fbf] ACPI: Reserving APIC table memory at [mem 0xba775fd0-0xba77606d] ACPI: Reserving FPDT table memory at [mem 0xba776070-0xba7760b3] ACPI: Reserving MCFG table memory at [mem 0xba7760b8-0xba7760f3] ACPI: Reserving HPET table memory at [mem 0xba7760f8-0xba77612f] ACPI: Reserving SSDT table memory at [mem 0xba776288-0xba77658b] ACPI: Reserving IVRS table memory at [mem 0xba776188-0xba77624f] ACPI: Reserving BGRT table memory at [mem 0xba776250-0xba776287] No NUMA configuration found [ 0.013395] Faking a node at [mem 0x0000000000000000-0x000000083effffff] NODE_DATA(0) allocated [mem 0x83efd3000-0x83effdfff] Zone ranges: [ 0.013724] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000083effffff] Device empty [ 0.013729] Movable zone start for each node [ 0.013732] Early memory node ranges [ 0.013733] node 0: [mem 0x0000000000001000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x00000000ba5e2fff] node 0: [mem 0x00000000bca4f000-0x00000000bca4ffff] node 0: [mem 0x00000000bcc56000-0x00000000bd082fff] node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff] node 0: [mem 0x0000000100001000-0x000000083effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013787] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.022143] On node 0, zone DMA32: 9324 pages in unavailable ranges [ 0.022169] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.022206] On node 0, zone DMA32: 1905 pages in unavailable ranges [ 0.023160] On node 0, zone Normal: 10241 pages in unavailable ranges [ 0.023242] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.023410] ACPI: PM-Timer IO Port: 0x808 [ 0.023417] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.023425] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.023428] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.023431] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.023433] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.023437] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.023438] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.023443] efi_bgrt: Ignoring BGRT: invalid image address [ 0.023445] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.023472] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xba5e3000-0xba766fff] PM: hibernation: Registered nosave memory: [mem 0xba767000-0xba776fff] PM: hibernation: Registered nosave memory: [mem 0xba777000-0xbb4dafff] PM: hibernation: Registered nosave memory: [mem 0xbb4db000-0xbc9e4fff] PM: hibernation: Registered nosave memory: [mem 0xbc9e5000-0xbca4efff] PM: hibernation: Registered nosave memory: [mem 0xbca50000-0xbcc55fff] PM: hibernation: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbd800000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbd800000-0xf7ffffff] available for PCI devices [ 0.023501] Booting paravirtualized kernel on bare hardware [ 0.023503] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.027369] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.027892] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.027901] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.027904] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.027939] Fallback order for Node 0: 0 [ 0.027942] Built 1 zonelists, mobility grouping on. Total pages: 8231603 [ 0.027943] Policy zone: Normal [ 0.027945] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 root=UUID=HASH_B40-5DEB-8CD9-9BA6-F49CE2C50911 ro amd_iommu=on quiet [ 0.027990] AMD-Vi: Unknown option - 'on' [ 0.028005] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64", will be passed to user space. [ 0.033174] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.035797] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.035835] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.035837] AGP: Checking aperture... [ 0.042040] AGP: No AGP bridge found [ 0.042042] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB) [ 0.042126] software IO TLB: area num 8. [ 0.091108] Memory: 2972528K/33449708K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2792K init, 17412K bss, 976492K reserved, 0K cma-reserved) [ 0.091428] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.091468] ftrace: allocating 40188 entries in 157 pages [ 0.099643] ftrace: allocated 157 pages with 5 groups [ 0.100408] Dynamic Preempt: voluntary [ 0.100457] rcu: Preemptible hierarchical RCU implementation. [ 0.100457] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.100459] Trampoline variant of Tasks RCU enabled. [ 0.100459] Rude variant of Tasks RCU enabled. [ 0.100460] Tracing variant of Tasks RCU enabled. [ 0.100461] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.100462] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.105149] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.105320] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.105371] Console: colour dummy device 80x25 [ 0.105387] printk: console [tty0] enabled [ 0.105414] ACPI: Core revision 20220331 [ 0.105491] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.105503] APIC: Switch to symmetric I/O mode setup [ 0.105537] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0 [ 0.105547] AMD-Vi: [Firmware Bug]: : IOAPIC[9] not in IVRS table [ 0.105551] AMD-Vi: [Firmware Bug]: : IOAPIC[10] not in IVRS table [ 0.105553] AMD-Vi: [Firmware Bug]: : No southbridge IOAPIC found [ 0.105555] AMD-Vi: Disabling interrupt remapping [ 0.105888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.125505] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39d9eb54969, max_idle_ns: 440795328077 ns [ 0.125510] Calibrating delay loop (skipped), value calculated using timer frequency.. 8026.86 BogoMIPS (lpj=16053720) [ 0.125531] LVT offset 1 assigned for vector 0xf9 [ 0.125535] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.125537] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.125540] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.125542] Spectre V2 : Mitigation: Retpolines [ 0.125543] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.125544] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.125545] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.125545] RETBleed: Mitigation: untrained return thunk [ 0.125547] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.125548] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.125552] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.125554] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.125555] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.125556] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.125558] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.131635] Freeing SMP alternatives memory: 36K [ 0.131640] pid_max: default: 32768 minimum: 301 [ 0.139383] LSM: Security Framework initializing [ 0.139405] landlock: Up and running. [ 0.139406] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.139439] AppArmor: AppArmor initialized [ 0.139441] TOMOYO Linux initialized [ 0.139447] LSM support for eBPF active [ 0.139558] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.139630] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.250879] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.251052] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251053] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.251081] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251082] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.251102] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251103] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.251123] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.251144] ... version: 0 [ 0.251145] ... bit width: 48 [ 0.251146] ... generic registers: 6 [ 0.251146] ... value mask: 0000ffffffffffff [ 0.251147] ... max period: 00007fffffffffff [ 0.251148] ... fixed-purpose events: 0 [ 0.251149] ... event mask: 000000000000003f [ 0.251225] signal: max sigframe size: 1776 [ 0.251252] rcu: Hierarchical SRCU implementation. [ 0.251253] rcu: Max phase no-delay instances is 1000. [ 0.251556] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.251682] smp: Bringing up secondary CPUs ... [ 0.251819] x86: Booting SMP configuration: [ 0.251820] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.305365] smp: Brought up 1 node, 8 CPUs [ 0.305365] smpboot: Max logical packages: 1 [ 0.305365] smpboot: Total of 8 processors activated (64214.88 BogoMIPS) [ 0.361544] node 0 deferred pages initialised in 56ms [ 0.365683] devtmpfs: initialized [ 0.365683] x86/mm: Memory block size: 128MB [ 0.368868] ACPI: PM: Registering ACPI NVS region [mem 0xba777000-0xbb4dafff] (14041088 bytes) [ 0.369532] ACPI: PM: Registering ACPI NVS region [mem 0xbca50000-0xbcc55fff] (2121728 bytes) [ 0.369624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.369658] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.369709] pinctrl core: initialized pinctrl subsystem [ 0.370666] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.371415] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.372065] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.372679] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.372719] thermal_sys: Registered thermal governor 'fair_share' [ 0.372719] thermal_sys: Registered thermal governor 'bang_bang' [ 0.372719] thermal_sys: Registered thermal governor 'step_wise' [ 0.372719] thermal_sys: Registered thermal governor 'user_space' [ 0.372719] thermal_sys: Registered thermal governor 'power_allocator' [ 0.372719] cpuidle: using governor ladder [ 0.372719] cpuidle: using governor menu [ 0.372719] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.372719] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.372719] PCI: not using MMCONFIG [ 0.372719] PCI: Using configuration type 1 for base access [ 0.372719] PCI: Using configuration type 1 for extended access [ 0.374599] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.374609] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.374609] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.374609] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.374609] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.374609] ACPI: Added _OSI(Module Device) [ 0.374609] ACPI: Added _OSI(Processor Device) [ 0.374609] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.374609] ACPI: Added _OSI(Processor Aggregator Device) [ 0.378055] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.378747] ACPI: EC: EC started [ 0.378748] ACPI: EC: interrupt blocked [ 0.378752] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.378754] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.378756] ACPI: Interpreter enabled [ 0.378771] ACPI: PM: (supports S0 S3 S4 S5) [ 0.378772] ACPI: Using IOAPIC for interrupt routing [ 0.378895] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.378926] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.378940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.378941] PCI: Using E820 reservations for host bridge windows [ 0.379136] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.384275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.384281] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.384637] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.384771] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.384859] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.384875] pci 0000:00:02.0: enabling Extended Tags [ 0.384897] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.384975] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.384991] pci 0000:00:04.0: enabling Extended Tags [ 0.385012] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.385088] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.385105] pci 0000:00:07.0: enabling Extended Tags [ 0.385126] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.385210] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.385223] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.385362] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.385481] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.385544] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.385615] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.385628] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.385753] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.385813] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.385888] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.386000] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.386016] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.386130] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.386256] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.386347] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.386360] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.386506] pci 0000:00:15.0: enabling Extended Tags [ 0.386540] pci 0000:00:15.0: supports D1 D2 [ 0.386620] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.386632] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.386796] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.386856] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.386922] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.386967] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.387009] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.387053] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.387097] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.387137] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.387216] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000 [ 0.387230] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.387279] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.387283] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.387331] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.387383] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.387461] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.387474] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.387537] pci 0000:01:00.1: supports D1 D2 [ 0.387603] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.397526] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.397624] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref] pci 0000:02:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref] pci 0000:02:00.0: supports D1 D2 [ 0.397725] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.397831] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.397904] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.398075] pci 0000:00:07.0: PCI bridge to [bus 03] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] pci_bus 0000:04: extended config space not accessible [ 0.398141] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.398151] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.398153] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.398155] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.398156] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.398158] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.398160] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.398233] pci 0000:05:00.0: [8086:2723] type 00 class 0x028000 [ 0.398267] pci 0000:05:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.398515] pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.398627] pci 0000:00:15.0: PCI bridge to [bus 05] pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.399093] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.399150] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.399209] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.399256] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.399293] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.399329] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.399365] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.399506] ACPI: EC: interrupt unblocked [ 0.399508] ACPI: EC: event unblocked [ 0.399511] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.399512] ACPI: EC: GPE=0xa [ 0.399514] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.399516] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.399582] iommu: Default domain type: Translated [ 0.399582] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.399582] pps_core: LinuxPPS API ver. 1 registered [ 0.399582] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.399582] PTP clock support registered [ 0.399582] EDAC MC: Ver: 3.0.0 [ 0.399582] Registered efivars operations [ 0.399582] NetLabel: Initializing [ 0.399582] NetLabel: domain hash size = 128 [ 0.399582] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.399582] NetLabel: unlabeled traffic allowed by default [ 0.399582] PCI: Using ACPI for IRQ routing [ 0.406307] PCI: pci_cache_line_size set to 64 bytes [ 0.406354] e820: reserve RAM buffer [mem 0xba5e3000-0xbbffffff] e820: reserve RAM buffer [mem 0xbca50000-0xbfffffff] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff] e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.406383] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.406383] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.406383] vgaarb: loaded [ 0.406383] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.406383] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.409547] clocksource: Switched to clocksource tsc-early [ 0.409691] VFS: Disk quotas dquot_6.6.0 [ 0.409706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.409875] AppArmor: AppArmor Filesystem Enabled [ 0.409889] pnp: PnP ACPI init [ 0.409961] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.410189] system 00:01: [io 0x040b] has been reserved [ 0.410192] system 00:01: [io 0x04d6] has been reserved [ 0.410193] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.410195] system 00:01: [io 0x0c14] has been reserved [ 0.410197] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.410199] system 00:01: [io 0x0c52] has been reserved [ 0.410200] system 00:01: [io 0x0c6c] has been reserved [ 0.410201] system 00:01: [io 0x0c6f] has been reserved [ 0.410203] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.410204] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.410206] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.410207] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.410209] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.410211] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.410212] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.410214] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.410215] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.410217] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.410219] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.410221] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.410224] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.410226] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.410228] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.410230] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.410232] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.410356] system 00:02: [io 0x0290-0x02af] has been reserved [ 0.410436] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.410619] pnp 00:06: [dma 0 disabled] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved [ 0.410861] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.410963] pnp: PnP ACPI: found 9 devices [ 0.417466] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.417548] NET: Registered PF_INET protocol family [ 0.417912] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.421541] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.421607] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.422013] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.422571] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.422848] TCP: Hash tables configured (established 262144 bind 65536) [ 0.423094] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.423249] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.423372] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.423468] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.423487] NET: Registered PF_XDP protocol family [ 0.423507] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:14.4: PCI bridge to [bus 04] pci 0000:00:15.0: PCI bridge to [bus 05] pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:04: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x750 took 21404 usecs [ 0.465544] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x750 took 19410 usecs [ 0.485544] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x750 took 19411 usecs [ 0.505543] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x750 took 19520 usecs [ 0.505691] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.505877] PCI: CLS 64 bytes, default 64 [ 0.505951] Trying to unpack rootfs image as initramfs... [ 0.506870] pci 0000:00:00.0: Adding to iommu group 0 [ 0.506882] pci 0000:00:02.0: Adding to iommu group 1 [ 0.506897] pci 0000:00:04.0: Adding to iommu group 2 [ 0.506908] pci 0000:00:07.0: Adding to iommu group 3 [ 0.506920] pci 0000:00:11.0: Adding to iommu group 4 [ 0.506939] pci 0000:00:12.0: Adding to iommu group 5 [ 0.506949] pci 0000:00:12.2: Adding to iommu group 5 [ 0.506970] pci 0000:00:13.0: Adding to iommu group 6 [ 0.506980] pci 0000:00:13.2: Adding to iommu group 6 [ 0.506992] pci 0000:00:14.0: Adding to iommu group 7 [ 0.507009] pci 0000:00:14.2: Adding to iommu group 8 [ 0.507029] pci 0000:00:14.3: Adding to iommu group 9 [ 0.507040] pci 0000:00:14.4: Adding to iommu group 10 [ 0.507051] pci 0000:00:14.5: Adding to iommu group 11 [ 0.507066] pci 0000:00:15.0: Adding to iommu group 12 [ 0.507088] pci 0000:00:16.0: Adding to iommu group 13 [ 0.507099] pci 0000:00:16.2: Adding to iommu group 13 [ 0.507128] pci 0000:01:00.0: Adding to iommu group 14 [ 0.507141] pci 0000:01:00.1: Adding to iommu group 14 [ 0.507152] pci 0000:02:00.0: Adding to iommu group 15 [ 0.507167] pci 0000:03:00.0: Adding to iommu group 16 [ 0.507173] pci 0000:05:00.0: Adding to iommu group 12 [ 0.509504] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.509602] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.509603] software IO TLB: mapped [mem 0x00000000a938d000-0x00000000ad38d000] (64MB) [ 0.509633] LVT offset 0 assigned for vector 0x400 [ 0.509720] perf: AMD IBS detected (0x000000ff) [ 0.509747] amd_uncore: 4 amd_nb counters detected [ 0.510908] Initialise system trusted keyrings [ 0.510920] Key type blacklist registered [ 0.510967] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.512583] zbud: loaded [ 0.512839] integrity: Platform Keyring initialized [ 0.512844] integrity: Machine keyring initialized [ 0.512845] Key type asymmetric registered [ 0.512847] Asymmetric key parser 'x509' registered [ 1.122643] Freeing initrd memory: 67780K [ 1.127457] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.127495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.127547] io scheduler mq-deadline registered [ 1.129107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.129150] ACPI: \_PR_.P001: Found 2 idle states [ 1.129239] ACPI: \_PR_.P002: Found 2 idle states [ 1.129366] ACPI: \_PR_.P003: Found 2 idle states [ 1.129483] ACPI: \_PR_.P004: Found 2 idle states [ 1.129581] ACPI: \_PR_.P005: Found 2 idle states [ 1.129651] ACPI: \_PR_.P006: Found 2 idle states [ 1.129764] ACPI: \_PR_.P007: Found 2 idle states [ 1.129838] ACPI: \_PR_.P008: Found 2 idle states [ 1.130066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.130194] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.130860] Linux agpgart interface v0.103 [ 1.130909] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.131514] i8042: PNP: No PS/2 controller found. [ 1.131578] mousedev: PS/2 mouse device common for all mice [ 1.131594] rtc_cmos 00:03: RTC can wake from S4 [ 1.131784] rtc_cmos 00:03: registered as rtc0 [ 1.131805] rtc_cmos 00:03: setting system clock to 2024-04-10T14:48:21 UTC (1712760501) [ 1.131829] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.131921] ledtrig-cpu: registered to indicate activity on CPUs [ 1.132144] efifb: probing for efifb [ 1.132157] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k [ 1.132159] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.132161] efifb: scrolling: redraw [ 1.132161] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.132245] Console: switching to colour frame buffer device 128x48 [ 1.132930] fb0: EFI VGA frame buffer device [ 1.143487] NET: Registered PF_INET6 protocol family [ 1.148378] Segment Routing with IPv6 [ 1.148391] In-situ OAM (IOAM) with IPv6 [ 1.148410] mip6: Mobile IPv6 [ 1.148413] NET: Registered PF_PACKET protocol family [ 1.148444] mpls_gso: MPLS GSO support [ 1.148446] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.148951] microcode: microcode updated early to new patch_level=0x06000852 [ 1.148982] microcode: CPU0: patch_level=0x06000852 [ 1.148989] microcode: CPU1: patch_level=0x06000852 [ 1.148994] microcode: CPU2: patch_level=0x06000852 [ 1.149001] microcode: CPU3: patch_level=0x06000852 [ 1.149007] microcode: CPU4: patch_level=0x06000852 [ 1.149013] microcode: CPU5: patch_level=0x06000852 [ 1.149020] microcode: CPU6: patch_level=0x06000852 [ 1.149026] microcode: CPU7: patch_level=0x06000852 [ 1.149029] microcode: Microcode Update Driver: v2.2. [ 1.149034] IPI shorthand broadcast: enabled [ 1.149056] sched_clock: Marking stable (1148748328, 168194)->(1362307946, -213391424) [ 1.149367] registered taskstats version 1 [ 1.149377] Loading compiled-in X.509 certificates [ 1.170388] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.170408] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.171243] zswap: loaded using pool lzo/zbud [ 1.171521] Key type .fscrypt registered [ 1.171523] Key type fscrypt-provisioning registered [ 1.176200] Key type encrypted registered [ 1.176205] AppArmor: AppArmor sha1 policy hashing enabled [ 1.176517] integrity: Loading X.509 certificate: UEFI:db [ 1.176745] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 1.176746] integrity: Loading X.509 certificate: UEFI:db [ 1.176955] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 1.176956] integrity: Loading X.509 certificate: UEFI:db [ 1.176978] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.176979] integrity: Loading X.509 certificate: UEFI:db [ 1.176999] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.177000] integrity: Loading X.509 certificate: UEFI:db [ 1.177217] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.178537] ima: No TPM chip found, activating TPM-bypass! [ 1.178538] ima: Allocated hash algorithm: sha256 [ 1.178547] ima: No architecture policies found [ 1.178568] evm: Initialising EVM extended attributes: [ 1.178569] evm: security.selinux [ 1.178570] evm: security.SMACK64 (disabled) [ 1.178571] evm: security.SMACK64EXEC (disabled) [ 1.178572] evm: security.SMACK64TRANSMUTE (disabled) [ 1.178573] evm: security.SMACK64MMAP (disabled) [ 1.178574] evm: security.apparmor [ 1.178574] evm: security.ima [ 1.178575] evm: security.capability [ 1.178576] evm: HMAC attrs: 0x1 [ 1.293000] Freeing unused decrypted memory: 2036K [ 1.293668] Freeing unused kernel image (initmem) memory: 2792K [ 1.304264] Write protecting the kernel read-only data: 26624k [ 1.305002] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.305289] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 1.344906] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.344921] Run /init as init process [ 1.344923] with arguments: [ 1.344925] /init [ 1.344926] with environment: [ 1.344927] HOME=/ [ 1.344928] TERM=linux [ 1.344929] BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 [ 1.444059] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892000 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892010 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892010 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892020 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892020 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892030 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892030 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892000 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892000 flags=0x0020] pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbc892010 flags=0x0020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.480800] SCSI subsystem initialized [ 1.482326] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.482582] ACPI: button: Power Button [PWRF] ACPI: bus type USB registered [ 1.493932] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.493941] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.493954] usbcore: registered new interface driver usbfs [ 1.493983] usbcore: registered new interface driver hub [ 1.494013] usbcore: registered new device driver usb [ 1.494116] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.512182] tsc: Refined TSC clocksource calibration: 4013.462 MHz [ 1.512188] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39da0a61397, max_idle_ns: 440795383582 ns [ 1.516596] clocksource: Switched to clocksource tsc [ 1.517541] ACPI: bus type drm_connector registered [ 1.518347] libata version 3.00 loaded. [ 1.519049] QUIRK: Enable AMD PLL fix [ 1.519074] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.519080] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.519086] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.519108] ehci-pci 0000:00:12.2: debug port 1 [ 1.519155] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.528520] ahci 0000:00:11.0: version 3.0 [ 1.532395] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 5 ports 6 Gbps 0x2f impl SATA mode [ 1.532401] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.536213] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.536309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.536312] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.536314] usb usb1: Product: EHCI Host Controller [ 1.536315] usb usb1: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd [ 1.536317] usb usb1: SerialNumber: ... [ 1.536505] hub 1-0:1.0: USB hub found [ 1.536515] hub 1-0:1.0: 5 ports detected [ 1.536779] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.538745] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 1.650898] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080010 [ 1.650981] scsi host0: ahci [ 1.651211] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.651555] scsi host1: ahci [ 1.651799] scsi host2: ahci [ 1.651980] scsi host3: ahci [ 1.652130] scsi host4: ahci [ 1.652311] scsi host5: ahci [ 1.652380] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.652384] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.652386] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.652388] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.652390] ata5: DUMMY [ 1.652391] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 [ 1.652615] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.652621] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.652631] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.652639] ehci-pci 0000:00:13.2: debug port 1 [ 1.652680] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000 [ 1.652723] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.652726] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 1.652729] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.652771] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.652774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.652776] usb usb2: Product: xHCI Host Controller [ 1.652777] usb usb2: Manufacturer: Linux 6.1.0-18-amd64 xhci-hcd [ 1.652778] usb usb2: SerialNumber: ... [ 1.652882] hub 2-0:1.0: USB hub found [ 1.652911] hub 2-0:1.0: 2 ports detected [ 1.653023] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.653046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.653048] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.653050] usb usb4: Product: xHCI Host Controller [ 1.653051] usb usb4: Manufacturer: Linux 6.1.0-18-amd64 xhci-hcd [ 1.653053] usb usb4: SerialNumber: ... [ 1.653149] hub 4-0:1.0: USB hub found [ 1.653157] hub 4-0:1.0: 2 ports detected [ 1.654957] r8169 0000:02:00.0 eth0: RTL8168f/8111f, 6675F4BE85BC6F3643EED9900BE0F1E2, XID 480, IRQ 34 [ 1.654961] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.668319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.668322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.668324] usb usb3: Product: EHCI Host Controller [ 1.668325] usb usb3: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd [ 1.668327] usb usb3: SerialNumber: ... [ 1.668441] hub 3-0:1.0: USB hub found [ 1.668449] hub 3-0:1.0: 5 ports detected [ 1.668737] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.668742] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 1.668745] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.668752] ehci-pci 0000:00:16.2: debug port 1 [ 1.668791] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000 [ 1.684263] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.684340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.684343] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.684344] usb usb5: Product: EHCI Host Controller [ 1.684346] usb usb5: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd [ 1.684347] usb usb5: SerialNumber: ... [ 1.684466] hub 5-0:1.0: USB hub found [ 1.684473] hub 5-0:1.0: 4 ports detected [ 1.908234] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 2.128261] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.128283] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.128306] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.128328] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.128400] ata1.00: ATA-11: PNY CS900 500GB SSD, CS9006B5, max UDMA/133 [ 2.128429] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.128528] ata6.00: failed to read native max address (err_mask=0x1) [ 2.128530] ata6.00: HPA support seems broken, skipping HPA handling [ 2.128532] ata6.00: supports DRM functions and may not be fully accessible [ 2.128533] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [ 2.128536] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [ 2.128630] ata1.00: configured for UDMA/133 [ 2.128689] ata2.00: ATA-10: WDC WD20EZAZ-00GGJB0, 80.00A80, max UDMA/133 [ 2.128812] scsi 0:0:0:0: Direct-Access ATA PNY CS900 500GB 06B5 PQ: 0 ANSI: 5 [ 2.130834] ata6.00: Features: Trust Dev-Sleep [ 2.131061] ata6.00: supports DRM functions and may not be fully accessible [ 2.131152] ata4.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.132767] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.133558] ata6.00: configured for UDMA/133 (device error ignored) [ 2.138286] ata4.00: Features: Dev-Sleep [ 2.139709] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.139713] ata2.00: Features: NCQ-prio [ 2.150556] ata4.00: configured for UDMA/133 [ 2.151585] ata2.00: configured for UDMA/133 [ 2.151742] scsi 1:0:0:0: Direct-Access ATA WDC WD20EZAZ-00G 0A80 PQ: 0 ANSI: 5 [ 2.183416] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=50.10 [ 2.183420] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.183422] usb 2-1: Product: USB2.0 Hub [ 2.183424] usb 2-1: Manufacturer: GenesysLogic [ 2.188259] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.189383] ata3.00: ATA-9: ST3000NM0033-9ZM178, 0001, max UDMA/133 [ 2.189566] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.190649] ata3.00: configured for UDMA/133 [ 2.190771] scsi 2:0:0:0: Direct-Access ATA ST3000NM0033-9ZM 0001 PQ: 0 ANSI: 5 [ 2.191189] scsi 3:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.191633] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [ 2.298775] hub 2-1:1.0: USB hub found [ 2.299047] hub 2-1:1.0: 4 ports detected [ 2.526969] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.547017] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=50.10 [ 2.547020] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.547022] usb 4-1: Product: USB3.0 Hub [ 2.547024] usb 4-1: Manufacturer: GenesysLogic [ 2.662831] hub 4-1:1.0: USB hub found [ 2.663112] hub 4-1:1.0: 4 ports detected [ 2.905711] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.929892] usb 4-2: New USB device found, idVendor=1f75, idProduct=0611, bcdDevice= 0.06 [ 2.929896] usb 4-2: New USB device strings: Mfr=4, Product=5, SerialNumber=... [ 2.929898] usb 4-2: Product: XT-U33502 [ 2.929900] usb 4-2: Manufacturer: XinTop [ 2.929901] usb 4-2: SerialNumber: ... [ 3.008259] usb 2-1.1: new high-speed USB device number 3 using xhci_hcd [ 3.147093] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 3.147101] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 3.147167] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 3.154777] [drm] amdgpu kernel modesetting enabled. [ 3.154858] amdgpu: CRAT table not found [ 3.154860] amdgpu: Virtual CRAT table created for CPU [ 3.154880] amdgpu: Topology: Add CPU node [ 3.155151] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [ 3.155165] [drm] register mmio base: 0xFEA00000 [ 3.155166] [drm] register mmio size: 262144 [ 3.155204] [drm] add ip block number 0 <vi_common> [ 3.155206] [drm] add ip block number 1 <gmc_v8_0> [ 3.155207] [drm] add ip block number 2 <tonga_ih> [ 3.155208] [drm] add ip block number 3 <gfx_v8_0> [ 3.155209] [drm] add ip block number 4 <sdma_v3_0> [ 3.155210] [drm] add ip block number 5 <powerplay> [ 3.155211] [drm] add ip block number 6 <dm> [ 3.155212] [drm] add ip block number 7 <uvd_v6_0> [ 3.155213] [drm] add ip block number 8 <vce_v3_0> [ 3.155398] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 3.155447] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 3.155450] amdgpu: ATOM BIOS: 113-58085SSB2-W90 [ 3.155467] [drm] UVD is enabled in VM mode [ 3.155468] [drm] UVD ENC is enabled in VM mode [ 3.155470] [drm] VCE enabled in VM mode [ 3.155560] Console: switching to colour dummy device 80x25 [ 3.155588] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 3.155590] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 3.155592] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 3.155616] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.155654] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 3.155661] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 3.155663] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 3.155670] [drm] Detected VRAM RAM=8192M, BAR=256M [ 3.155671] [drm] RAM width 256bits GDDR5 [ 3.155720] [drm] amdgpu: 8192M of VRAM memory ready [ 3.155721] [drm] amdgpu: 15997M of GTT memory ready. [ 3.155737] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 3.156103] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [ 3.156216] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 3.156240] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 3.156260] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 3.156262] [drm] Chained IB support enabled! [ 3.156284] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 3.156387] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 3.156498] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 3.157204] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 3.157230] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 3.157257] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 3.157416] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 3.157419] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 3.158059] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 3.158061] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 3.158952] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 3.159736] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.159769] sd 0:0:0:0: [sda] Write Protect is off [ 3.159774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.159799] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.159801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.159805] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.159824] sd 1:0:0:0: [sdb] Write Protect is off [ 3.159827] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.159839] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.159839] ata6.00: Enabling discard_zeroes_data [ 3.159841] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.159841] sd 3:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.159854] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.159857] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.159862] sd 3:0:0:0: [sde] Write Protect is off [ 3.159865] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.159869] sd 2:0:0:0: [sdc] Write Protect is off [ 3.159872] sd 5:0:0:0: [sdd] Write Protect is off [ 3.159872] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.159875] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.159899] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.159905] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.159909] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.159916] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.159950] sd 3:0:0:0: [sde] Preferred minimum I/O size 512 bytes [ 3.159954] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.159981] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [ 3.160709] ata6.00: Enabling discard_zeroes_data [ 3.161684] sde: [ 3.161721] sd 3:0:0:0: [sde] Attached SCSI disk [ 3.162260] sda: sda1 sda2 sda3 [ 3.162403] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.166694] sdd: sdd1 sdd2 sdd3 sdd4 [ 3.168256] sd 5:0:0:0: [sdd] supports TCG Opal [ 3.168258] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.176297] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 3.188379] sdc: sdc1 [ 3.188463] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.197617] sdb: sdb1 [ 3.197786] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.206468] usb-storage 4-2:1.0: USB Mass Storage device detected [ 3.206651] scsi host6: usb-storage 4-2:1.0 [ 3.206759] usbcore: registered new interface driver usb-storage [ 3.208538] usbcore: registered new interface driver uas [ 3.208806] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.208811] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.208813] usb usb6: Product: OHCI PCI host controller [ 3.208816] usb usb6: Manufacturer: Linux 6.1.0-18-amd64 ohci_hcd [ 3.208817] usb usb6: SerialNumber: ... [ 3.210426] hub 6-0:1.0: USB hub found [ 3.210440] hub 6-0:1.0: 5 ports detected [ 3.432412] [drm] Display Core initialized with v3.2.207! [ 3.432945] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 3.432952] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 3.432994] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000 [ 3.444752] usb 2-1.1: New USB device found, idVendor=1397, idProduct=0508, bcdDevice= 1.12 [ 3.444756] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 3.444758] usb 2-1.1: Product: UMC204HD 192k [ 3.444760] usb 2-1.1: Manufacturer: BEHRINGER [ 3.504291] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.504294] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.504296] usb usb7: Product: OHCI PCI host controller [ 3.504298] usb usb7: Manufacturer: Linux 6.1.0-18-amd64 ohci_hcd [ 3.504299] usb usb7: SerialNumber: ... [ 3.516604] hub 7-0:1.0: USB hub found [ 3.516622] hub 7-0:1.0: 5 ports detected [ 3.517432] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 3.517437] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 3.517470] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 3.581009] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.581013] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.581015] usb usb8: Product: OHCI PCI host controller [ 3.581016] usb usb8: Manufacturer: Linux 6.1.0-18-amd64 ohci_hcd [ 3.581017] usb usb8: SerialNumber: ... [ 3.581888] hub 8-0:1.0: USB hub found [ 3.581896] hub 8-0:1.0: 2 ports detected [ 3.582132] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 3.582137] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 3.582161] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000 [ 3.629695] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 3.648028] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.648030] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.648032] usb usb9: Product: OHCI PCI host controller [ 3.648033] usb usb9: Manufacturer: Linux 6.1.0-18-amd64 ohci_hcd [ 3.648035] usb usb9: SerialNumber: ... [ 3.660346] hub 9-0:1.0: USB hub found [ 3.660355] hub 9-0:1.0: 4 ports detected [ 3.707812] [drm] UVD and UVD ENC initialized successfully. [ 3.807059] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 3.807062] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.807063] usb 4-1.4: Product: USB 10/100/1000 LAN [ 3.807065] usb 4-1.4: Manufacturer: Realtek [ 3.807066] usb 4-1.4: SerialNumber: ... [ 3.807128] usb 6-3: new full-speed USB device number 2 using ohci-pci [ 3.807784] [drm] VCE initialized successfully. [ 3.808647] kfd kfd: amdgpu: skipped device 1002:67df, PCI rejects atomics 730<0 [ 3.808659] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [ 3.812425] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 3.812950] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:01:00.0 on minor 0 [ 3.822513] fbcon: amdgpudrmfb (fb0) is primary device [ 3.924156] usbcore: registered new device driver r8152-cfgselector [ 3.959334] Console: switching to colour frame buffer device 170x48 [ 3.977263] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 3.988250] usb 2-1.3: new full-speed USB device number 4 using xhci_hcd [ 4.012898] usb 6-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 4.012909] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.012915] usb 6-3: Product: USB Receiver [ 4.012919] usb 6-3: Manufacturer: Logitech [ 4.108249] usb 9-4: new full-speed USB device number 2 using ohci-pci [ 4.172250] usb 6-5: new full-speed USB device number 3 using ohci-pci [ 4.232894] scsi host6: scsi scan: INQUIRY result too short (5), using 36 [ 4.232898] scsi 6:0:0:0: Direct-Access XinTop XT-U33502 PQ: 0 ANSI: 0 [ 4.233434] sd 6:0:0:0: [sdf] Media removed, stopped polling [ 4.233699] sd 6:0:0:0: [sdf] Attached SCSI removable disk [ 4.307099] usb 9-4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 4.307109] usb 9-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.372901] usb 6-5: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01 [ 4.372911] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.372917] usb 6-5: Product: USB Receiver [ 4.372921] usb 6-5: Manufacturer: Logitech [ 4.385129] hid: raw HID events driver (C) Jiri Kosina [ 4.413974] usbcore: registered new interface driver usbhid [ 4.413976] usbhid: USB HID core driver [ 4.415770] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/0003:046D:C52B.0001/input/input2 [ 4.472578] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0 [ 4.472916] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.1/0003:046D:C52B.0002/input/input3 [ 4.473000] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.1/0003:046D:C52B.0002/input/input4 [ 4.497378] usb 2-1.3: New USB device found, idVendor=045e, idProduct=0b12, bcdDevice= 5.0f [ 4.497381] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.497383] usb 2-1.3: Product: Controller [ 4.497385] usb 2-1.3: Manufacturer: Microsoft [ 4.497386] usb 2-1.3: SerialNumber: ... [ 4.532267] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.1/0003:046D:C52B.0002/input/input5 [ 4.532368] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1 [ 4.532636] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input2 [ 4.532818] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:046D:C548.0004/input/input7 [ 4.592374] hid-generic 0003:046D:C548.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-5/input0 [ 4.592690] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.0005/input/input8 [ 4.592770] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.0005/input/input9 [ 4.652357] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.0005/input/input10 [ 4.652488] hid-generic 0003:046D:C548.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input1 [ 4.652683] hid-generic 0003:046D:C548.0006: hiddev2,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2 [ 4.684247] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 4.783258] r8152 4-1.4:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw [ 4.849066] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input2 [ 4.971363] input: Logitech Wireless Device PID:407b Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:407B.0007/input/input11 [ 4.971556] input: Logitech Wireless Device PID:407b Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:407B.0007/input/input12 [ 4.971659] hid-generic 0003:046D:407B.0007: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:407b] on usb-0000:00:12.0-3/input2:1 [ 4.973326] input: Logitech Wireless Device PID:4088 Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:4088.0008/input/input16 [ 4.973445] input: Logitech Wireless Device PID:4088 Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:4088.0008/input/input17 [ 4.973517] hid-generic 0003:046D:4088.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4088] on usb-0000:00:12.0-3/input2:2 [ 5.135149] input: Logitech MX Vertical as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:407B.0007/input/input21 [ 5.135324] logitech-hidpp-device 0003:046D:407B.0007: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-0000:00:12.0-3/input2:1 [ 5.272935] input: Logitech ERGO K860 as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:4088.0008/input/input22 [ 5.273090] logitech-hidpp-device 0003:046D:4088.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech ERGO K860] on usb-0000:00:12.0-3/input2:2 [ 9.910382] r8152 4-1.4:1.0: load rtl8153a-4 v2 02/07/20 successfully [ 9.936788] r8152 4-1.4:1.0 eth0: v1.12.13 [ 9.936811] usbcore: registered new interface driver r8152 [ 9.940418] usbcore: registered new interface driver cdc_ether [ 9.941141] usbcore: registered new interface driver r8153_ecm [ 9.950323] r8152 4-1.4:1.0 enx00e04c6892fa: renamed from eth0 [ 10.039395] PM: Image not found (code -22) [ 10.761959] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 10.838965] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 11.262464] pstore: Using crash dump compression: deflate [ 11.265108] loop: module loaded [ 11.271598] fuse: init (API version 7.37) [ 11.273862] pstore: Registered efi as persistent store backend [ 11.274347] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 11.274384] device-mapper: uevent: version 1.0.3 [ 11.274465] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 11.285428] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 11.292048] lp: driver loaded but no devices found [ 11.296684] ppdev: user-space parallel port driver [ 11.548181] random: crng init done [ 11.564403] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.568701] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 11.570236] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 11.572698] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 11.575563] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 11.577106] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 11.717771] input: PC Speaker as /devices/platform/pcspkr/input/input23 [ 11.719434] cryptd: max_cpu_qlen set to 1000 [ 11.720437] input: Microsoft Xbox Series S|X Controller as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24 [ 11.725201] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 11.725322] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 11.728280] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 11.742663] usbcore: registered new interface driver xpad [ 11.742766] AVX version of gcm_enc/dec engaged. [ 11.742817] AES CTR mode by8 optimization enabled [ 11.757930] Adding 999420k swap on /dev/sda3. Priority:-2 extents:1 across:999420k SSFS [ 11.797566] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 11.803109] mc: Linux media interface: v0.10 [ 11.836307] asus_wmi: ASUS WMI generic driver loaded [ 11.838324] asus_wmi: Initialization: 0x0 [ 11.838356] asus_wmi: BIOS WMI version: 0.9 [ 11.838402] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.838448] asus_wmi: SFUN value: 0x0 [ 11.838451] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 11.838662] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 11.840246] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 11.841276] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input25 [ 11.842021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.842252] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 11.846594] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 11.847654] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 11.866328] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 11.866404] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 11.887771] Intel(R) Wireless WiFi driver for Linux [ 11.887852] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002) [ 11.970140] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 11.971732] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input26 [ 11.971799] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input27 [ 11.971859] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input28 [ 11.971918] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input29 [ 11.971978] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input30 [ 11.972039] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input31 [ 11.989868] iwlwifi 0000:05:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-72.ucode [ 11.989885] iwlwifi 0000:05:00.0: api flags index 2 larger than supported by driver [ 11.989904] iwlwifi 0000:05:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 11.990500] iwlwifi 0000:05:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 11.990526] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 11.990564] iwlwifi 0000:05:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 11.990587] iwlwifi 0000:05:00.0: loaded firmware version 72.daa05125.0 cc-a0-72.ucode op_mode iwlmvm [ 12.047368] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 12.047375] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.047377] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.047379] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.047380] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 12.047382] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.047383] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 12.047385] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 12.047387] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.075861] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input32 [ 12.075933] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input33 [ 12.075994] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input34 [ 12.076056] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input35 [ 12.076121] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input36 [ 12.095278] SVM: TSC scaling supported [ 12.095283] kvm: Nested Virtualization enabled [ 12.095284] SVM: kvm: Nested Paging enabled [ 12.095294] SVM: LBR virtualization supported [ 12.124884] Bluetooth: Core ver 2.22 [ 12.124915] NET: Registered PF_BLUETOOTH protocol family [ 12.124917] Bluetooth: HCI device and connection manager initialized [ 12.124970] Bluetooth: HCI socket layer initialized [ 12.124974] Bluetooth: L2CAP socket layer initialized [ 12.124980] Bluetooth: SCO socket layer initialized [ 12.128765] MCE: In-kernel MCE decoding enabled. [ 12.145427] usbcore: registered new interface driver btusb [ 12.160998] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 12.163983] Bluetooth: hci0: Device revision is 1 [ 12.163988] Bluetooth: hci0: Secure boot is enabled [ 12.163990] Bluetooth: hci0: OTP lock is enabled [ 12.163993] Bluetooth: hci0: API lock is enabled [ 12.163994] Bluetooth: hci0: Debug lock is disabled [ 12.163995] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 12.169863] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi [ 12.169872] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 12.169896] Bluetooth: hci0: Boot Address: 0x24800 [ 12.169898] Bluetooth: hci0: Firmware Version: 15-45.22 [ 12.283139] iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 12.283203] thermal thermal_zone0: failed to read out thermal zone (-61) [ 12.413374] iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100 [ 12.416108] EXT4-fs (sdb1): recovery complete [ 12.416114] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.479477] iwlwifi 0000:05:00.0: base HW address: 74561AC49122F8A5D2996CF1DE60B68B [ 12.596267] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0 [ 12.806236] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.806240] Bluetooth: BNEP filters: protocol multicast [ 12.806244] Bluetooth: BNEP socket layer initialized [ 12.975531] NET: Registered PF_QIPCRTR protocol family [ 13.037788] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw [ 13.038213] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 13.241716] usbcore: registered new interface driver snd-usb-audio [ 13.258512] r8169 0000:02:00.0 enp2s0: Link is Down [ 13.469984] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469991] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469993] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469995] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469996] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469998] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.469999] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.471091] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 13.709421] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709427] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709429] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709431] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709432] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709434] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 13.709435] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [ 14.271277] r8169 0000:02:00.0: invalid VPD tag 0xff (size 0) at offset 0; assume missing optional EEPROM [ 16.260224] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 16.260237] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 17.174030] wlp5s0: authenticate with 94C1A303F07F89691F66500A4E53515B [ 17.176540] wlp5s0: send auth to 94C1A303F07F89691F66500A4E53515B (try 1/3) [ 17.221963] wlp5s0: authenticated [ 17.228197] wlp5s0: associate with 94C1A303F07F89691F66500A4E53515B (try 1/3) [ 17.229725] wlp5s0: RX AssocResp from 94C1A303F07F89691F66500A4E53515B (capab=0x1011 status=0 aid=23) [ 17.235019] wlp5s0: associated [ 17.348986] wlp5s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 94C1A303F07F89691F66500A4E53515B [ 17.357297] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 17.954247] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 4 comp_code 3 [ 17.954254] xhci_hcd 0000:03:00.0: Looking for event-dma 00000000bff3d000 trb-start 00000000bff3d010 trb-end 00000000bff3d010 seg-start 00000000bff3d000 seg-end 00000000bff3dff0 [ 18.642993] Bluetooth: hci0: Waiting for firmware download to complete [ 18.643988] Bluetooth: hci0: Firmware loaded in 6322375 usecs [ 18.644041] Bluetooth: hci0: Waiting for device to boot [ 18.659031] Bluetooth: hci0: Device booted in 14656 usecs [ 18.659515] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc [ 18.659519] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 18.662998] Bluetooth: hci0: Applying Intel DDC parameters completed [ 18.665099] Bluetooth: hci0: Firmware revision 0.3 build 15 week 45 2022 [ 18.779276] Bluetooth: MGMT ver 1.22 [ 18.783965] NET: Registered PF_ALG protocol family [ 19.327944] PPP generic driver version 2.4.2 [ 19.330168] NET: Registered PF_PPPOX protocol family [ 19.340399] l2tp_core: L2TP core driver, V2.0 [ 19.343166] l2tp_netlink: L2TP netlink interface [ 19.345729] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 19.390522] Initializing XFRM netlink socket [ 50.964896] logitech-hidpp-device 0003:046D:4088.0008: HID++ 4.5 device connected. [ 62.013273] input: solaar-keyboard as /devices/virtual/input/input37 [ 75.173087] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 131.828540] Bluetooth: RFCOMM TTY layer initialized [ 131.828548] Bluetooth: RFCOMM socket layer initialized [ 131.828554] Bluetooth: RFCOMM ver 1.11 [ 136.611122] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd [14300.251635] VFIO - User Level meta-driver version: 0.3 [14300.364825] wlp5s0: deauthenticating from 94C1A303F07F89691F66500A4E53515B by local choice (Reason: 3=DEAUTH_LEAVING) [14303.046179] vfio-pci 0000:05:00.0: vfio_ecap_init: hiding ecap 0x1e@0x154 [20538.686037] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [20538.708296] ata4.00: configured for UDMA/133 [25250.248969] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv(authenc(hmac(sha1-avx),cbc-aes-aesni))) [32686.522734] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.522741] ata6.00: irq_stat 0x40000001 [32686.522745] ata6.00: failed command: WRITE DMA [32686.522746] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 24 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.522752] ata6.00: status: { DRDY ERR } [32686.522754] ata6.00: error: { ABRT } [32686.522950] ata6.00: supports DRM functions and may not be fully accessible [32686.525614] ata6.00: supports DRM functions and may not be fully accessible [32686.528047] ata6.00: configured for UDMA/133 (device error ignored) [32686.528070] ata6: EH complete [32686.578727] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.578733] ata6.00: irq_stat 0x40000001 [32686.578737] ata6.00: failed command: WRITE DMA [32686.578739] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 15 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.578744] ata6.00: status: { DRDY ERR } [32686.578746] ata6.00: error: { ABRT } [32686.578938] ata6.00: supports DRM functions and may not be fully accessible [32686.581660] ata6.00: supports DRM functions and may not be fully accessible [32686.584088] ata6.00: configured for UDMA/133 (device error ignored) [32686.584110] ata6: EH complete [32686.622720] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.622731] ata6.00: irq_stat 0x40000001 [32686.622735] ata6.00: failed command: WRITE DMA [32686.622737] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 17 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.622743] ata6.00: status: { DRDY ERR } [32686.622745] ata6.00: error: { ABRT } [32686.622947] ata6.00: supports DRM functions and may not be fully accessible [32686.625594] ata6.00: supports DRM functions and may not be fully accessible [32686.628343] ata6.00: configured for UDMA/133 (device error ignored) [32686.628370] ata6: EH complete [32686.674678] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.674686] ata6.00: irq_stat 0x40000001 [32686.674697] ata6.00: failed command: WRITE DMA [32686.674699] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 19 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.674707] ata6.00: status: { DRDY ERR } [32686.674709] ata6.00: error: { ABRT } [32686.674902] ata6.00: supports DRM functions and may not be fully accessible [32686.677711] ata6.00: supports DRM functions and may not be fully accessible [32686.680558] ata6.00: configured for UDMA/133 (device error ignored) [32686.680578] ata6: EH complete [32686.738730] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.738738] ata6.00: irq_stat 0x40000001 [32686.738741] ata6.00: failed command: WRITE DMA [32686.738743] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 15 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.738749] ata6.00: status: { DRDY ERR } [32686.738751] ata6.00: error: { ABRT } [32686.738948] ata6.00: supports DRM functions and may not be fully accessible [32686.741710] ata6.00: supports DRM functions and may not be fully accessible [32686.744123] ata6.00: configured for UDMA/133 (device error ignored) [32686.744144] ata6: EH complete [32686.790665] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32686.790678] ata6.00: irq_stat 0x40000001 [32686.790683] ata6.00: failed command: WRITE DMA [32686.790685] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 19 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32686.790691] ata6.00: status: { DRDY ERR } [32686.790693] ata6.00: error: { ABRT } [32686.790914] ata6.00: supports DRM functions and may not be fully accessible [32686.793577] ata6.00: supports DRM functions and may not be fully accessible [32686.796020] ata6.00: configured for UDMA/133 (device error ignored) [32686.796046] sd 5:0:0:0: [sdd] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [32686.796049] sd 5:0:0:0: [sdd] tag#19 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#19 Add. Sense: Unaligned write command [32686.796054] sd 5:0:0:0: [sdd] tag#19 CDB: Write(10) 2a 00 00 00 08 00 00 00 01 00 [32686.796056] I/O error, dev sdd, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2 [32686.796061] Buffer I/O error on dev sdd1, logical block 0, lost sync page write [32686.796077] ata6: EH complete [32686.796352] ata6.00: Enabling discard_zeroes_data [32686.796623] ata6.00: Enabling discard_zeroes_data [32687.326694] ata6: limiting SATA link speed to 3.0 Gbps [32687.326715] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [32687.326721] ata6.00: irq_stat 0x40000001 [32687.326726] ata6.00: failed command: WRITE DMA [32687.326729] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 21 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32687.326736] ata6.00: status: { DRDY ERR } [32687.326739] ata6.00: error: { ABRT } [32687.326745] ata6: hard resetting link [32687.802658] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [32687.802900] ata6.00: supports DRM functions and may not be fully accessible [32687.805480] ata6.00: supports DRM functions and may not be fully accessible [32687.807984] ata6.00: configured for UDMA/133 (device error ignored) [32687.808023] ata6: EH complete [32687.934672] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32687.934685] ata6.00: irq_stat 0x40000001 [32687.934690] ata6.00: failed command: WRITE DMA [32687.934693] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 24 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32687.934701] ata6.00: status: { DRDY ERR } [32687.934704] ata6.00: error: { ABRT } [32687.934916] ata6.00: supports DRM functions and may not be fully accessible [32687.937655] ata6.00: supports DRM functions and may not be fully accessible [32687.940173] ata6.00: configured for UDMA/133 (device error ignored) [32687.940215] ata6: EH complete [32688.010651] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32688.010659] ata6.00: irq_stat 0x40000001 [32688.010663] ata6.00: failed command: WRITE DMA [32688.010665] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 16 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32688.010671] ata6.00: status: { DRDY ERR } [32688.010673] ata6.00: error: { ABRT } [32688.010882] ata6.00: supports DRM functions and may not be fully accessible [32688.013638] ata6.00: supports DRM functions and may not be fully accessible [32688.016088] ata6.00: configured for UDMA/133 (device error ignored) [32688.016113] ata6: EH complete [32688.070644] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32688.070652] ata6.00: irq_stat 0x40000001 [32688.070655] ata6.00: failed command: WRITE DMA [32688.070657] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 2 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32688.070663] ata6.00: status: { DRDY ERR } [32688.070665] ata6.00: error: { ABRT } [32688.070861] ata6.00: supports DRM functions and may not be fully accessible [32688.073563] ata6.00: supports DRM functions and may not be fully accessible [32688.075995] ata6.00: configured for UDMA/133 (device error ignored) [32688.076016] ata6: EH complete [32688.134639] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32688.134649] ata6.00: irq_stat 0x40000001 [32688.134654] ata6.00: failed command: WRITE DMA [32688.134656] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 29 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32688.134664] ata6.00: status: { DRDY ERR } [32688.134667] ata6.00: error: { ABRT } [32688.134885] ata6.00: supports DRM functions and may not be fully accessible [32688.137559] ata6.00: supports DRM functions and may not be fully accessible [32688.140395] ata6.00: configured for UDMA/133 (device error ignored) [32688.140421] ata6: EH complete [32688.202657] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32688.202672] ata6.00: irq_stat 0x40000001 [32688.202680] ata6.00: failed command: WRITE DMA [32688.202683] ata6.00: cmd ca/00:01:00:08:00/00:00:00:00:00/e0 tag 4 dma 512 out res 51/04:01:00:08:00/00:00:00:00:00/e0 Emask 0x1 (device error) [32688.202689] ata6.00: status: { DRDY ERR } [32688.202691] ata6.00: error: { ABRT } [32688.202905] ata6.00: supports DRM functions and may not be fully accessible [32688.205616] ata6.00: supports DRM functions and may not be fully accessible [32688.208120] ata6.00: configured for UDMA/133 (device error ignored) [32688.208151] sd 5:0:0:0: [sdd] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [32688.208155] sd 5:0:0:0: [sdd] tag#4 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#4 Add. Sense: Unaligned write command [32688.208160] sd 5:0:0:0: [sdd] tag#4 CDB: Write(10) 2a 00 00 00 08 00 00 00 01 00 [32688.208162] I/O error, dev sdd, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2 [32688.208168] Buffer I/O error on dev sdd1, logical block 0, lost sync page write [32688.208189] ata6: EH complete [32688.208335] ata6.00: Enabling discard_zeroes_data [32688.208607] ata6.00: Enabling discard_zeroes_data [57738.154965] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [57738.177204] ata4.00: configured for UDMA/133 [77909.145640] r8169 0000:02:00.0 enp2s0: Link is Down [77909.861550] PM: suspend entry (deep) [77909.879372] Filesystems sync: 0.017 seconds [77909.879610] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.ddc [77909.879623] (NULL device *): firmware: direct-loading firmware regulatory.db [77909.879673] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [77909.879951] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.sfi [77909.880076] Freezing user space processes [77909.884022] Freezing user space processes completed (elapsed 0.003 seconds) [77909.884026] OOM killer disabled. [77909.884027] Freezing remaining freezable tasks [77909.885206] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [77909.885225] printk: Suspending console(s) (use no_console_suspend to debug) [77909.886029] serial 00:06: disabled [77909.921089] sd 3:0:0:0: [sde] Synchronizing SCSI cache [77909.921101] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [77909.921163] ata4.00: Entering standby power mode [77909.921210] ata2.00: Entering standby power mode [77909.924982] sd 5:0:0:0: [sdd] Synchronizing SCSI cache [77909.925004] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [77909.925004] sd 0:0:0:0: [sda] Synchronizing SCSI cache [77909.925221] ata3.00: Entering standby power mode [77909.925556] ata1.00: Entering standby power mode [77909.957221] ata6.00: supports DRM functions and may not be fully accessible [77909.959977] ata6.00: supports DRM functions and may not be fully accessible [77909.962456] ata6.00: device reported invalid CHS sector 0 [77909.989213] ata6.00: supports DRM functions and may not be fully accessible [77909.991977] ata6.00: supports DRM functions and may not be fully accessible [77909.994423] ata6.00: device reported invalid CHS sector 0 [77910.021159] ata6.00: supports DRM functions and may not be fully accessible [77910.023944] ata6.00: supports DRM functions and may not be fully accessible [77910.026460] ata6.00: device reported invalid CHS sector 0 [77910.026484] sd 5:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK [77910.026488] sd 5:0:0:0: [sdd] Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] Add. Sense: Unaligned write command [77910.026615] ata6.00: Entering standby power mode [77910.026648] ata6.00: STANDBY IMMEDIATE failed (err_mask=0x1) [77911.992933] ACPI: EC: interrupt blocked [77912.004970] amdgpu 0000:01:00.0: amdgpu: PCI CONFIG reset [77912.017141] ACPI: PM: Preparing to enter system sleep state S3 [77912.017225] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [77912.017615] ACPI: EC: event blocked [77912.017616] ACPI: EC: EC stopped [77912.017616] ACPI: PM: Saving platform NVS memory [77912.017830] Disabling non-boot CPUs ... [77912.020346] smpboot: CPU 1 is now offline [77912.023081] smpboot: CPU 2 is now offline [77912.025505] smpboot: CPU 3 is now offline [77912.027872] smpboot: CPU 4 is now offline [77912.030112] smpboot: CPU 5 is now offline [77912.032265] smpboot: CPU 6 is now offline [77912.034314] smpboot: CPU 7 is now offline [77912.040389] microcode: reload patch_level=0x06000852 [77912.040395] ACPI: PM: Low-level resume complete [77912.040406] ACPI: EC: EC started [77912.040407] ACPI: PM: Restoring platform NVS memory [77912.041549] LVT offset 0 assigned for vector 0x400 [77912.041872] Enabling non-boot CPUs ... [77912.041923] x86: Booting SMP configuration: [77912.041924] smpboot: Booting Node 0 Processor 1 APIC 0x11 [77912.047661] microcode: CPU1: patch_level=0x06000852 [77912.050291] ACPI: \_PR_.P002: Found 2 idle states [77912.050605] CPU1 is up [77912.050644] smpboot: Booting Node 0 Processor 2 APIC 0x12 [77912.056251] microcode: CPU2: patch_level=0x06000852 [77912.058489] ACPI: \_PR_.P003: Found 2 idle states [77912.058842] CPU2 is up [77912.058865] smpboot: Booting Node 0 Processor 3 APIC 0x13 [77912.064589] microcode: CPU3: patch_level=0x06000852 [77912.066843] ACPI: \_PR_.P004: Found 2 idle states [77912.067259] CPU3 is up [77912.067281] smpboot: Booting Node 0 Processor 4 APIC 0x14 [77912.072886] microcode: CPU4: patch_level=0x06000852 [77912.075117] ACPI: \_PR_.P005: Found 2 idle states [77912.075608] CPU4 is up [77912.075633] smpboot: Booting Node 0 Processor 5 APIC 0x15 [77912.081374] microcode: CPU5: patch_level=0x06000852 [77912.083643] ACPI: \_PR_.P006: Found 2 idle states [77912.084220] CPU5 is up [77912.084246] smpboot: Booting Node 0 Processor 6 APIC 0x16 [77912.089818] microcode: CPU6: patch_level=0x06000852 [77912.092050] ACPI: \_PR_.P007: Found 2 idle states [77912.092684] CPU6 is up [77912.092713] smpboot: Booting Node 0 Processor 7 APIC 0x17 [77912.098447] microcode: CPU7: patch_level=0x06000852 [77912.100717] ACPI: \_PR_.P008: Found 2 idle states [77912.101430] CPU7 is up [77912.111351] ACPI: PM: Waking up from system sleep state S3 [77912.111689] ACPI: EC: interrupt unblocked [77912.124647] ACPI: EC: event unblocked [77912.124859] xhci_hcd 0000:03:00.0: xHC error in resume, USBSTS 0x409, Reinit [77912.124863] usb usb2: root hub lost power or was reset [77912.124865] usb usb4: root hub lost power or was reset [77912.125338] serial 00:06: activated [77912.247631] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [77912.527903] usb 9-4: reset full-speed USB device number 2 using ohci-pci [77912.532087] usb 2-1: reset high-speed USB device number 2 using xhci_hcd [77912.599894] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77912.599900] ata4.00: Entering active power mode [77912.599912] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77912.599921] ata1.00: Entering active power mode [77912.599934] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [77912.599939] ata6.00: Entering active power mode [77912.599976] ata6.00: VERIFY failed (err_mask=0x1) [77912.600165] ata6.00: supports DRM functions and may not be fully accessible [77912.600362] ata1.00: configured for UDMA/133 [77912.602689] ata6.00: supports DRM functions and may not be fully accessible [77912.605345] ata6.00: configured for UDMA/133 (device error ignored) [77912.605364] ata6.00: Entering active power mode [77912.605409] ata6.00: VERIFY failed (err_mask=0x1) [77912.605427] ata6.00: Entering active power mode [77912.605459] ata6.00: VERIFY failed (err_mask=0x1) [77912.605465] ata6.00: Entering active power mode [77912.605496] ata6.00: VERIFY failed (err_mask=0x1) [77912.605502] ata6.00: Entering active power mode [77912.605534] ata6.00: VERIFY failed (err_mask=0x1) [77912.605535] ata6: EH pending after 5 tries, giving up [77912.605663] ata6.00: Enabling discard_zeroes_data [77912.622108] ata4.00: configured for UDMA/133 [77913.049523] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd [77913.055876] [drm] Fence fallback timer expired on ring sdma0 [77913.309574] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd [77913.408121] usb 2-1.3: reset full-speed USB device number 4 using xhci_hcd [77913.495975] usb 2-1.3: device descriptor read/64, error -32 [77913.567864] [drm] Fence fallback timer expired on ring sdma0 [77913.691970] usb 2-1.3: device descriptor read/64, error -32 [77913.879925] usb 2-1.3: reset full-speed USB device number 4 using xhci_hcd [77914.079859] [drm] Fence fallback timer expired on ring sdma0 [77914.152087] usb 2-1.1: reset high-speed USB device number 3 using xhci_hcd [77914.335879] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77914.335890] ata2.00: Entering active power mode [77914.377863] ata2.00: configured for UDMA/133 [77914.511945] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [77914.532456] r8152-cfgselector 4-1.4: device firmware changed [77914.591845] [drm] Fence fallback timer expired on ring sdma0 [77915.103839] [drm] Fence fallback timer expired on ring sdma0 [77915.615825] [drm] Fence fallback timer expired on ring sdma0 [77916.127828] [drm] Fence fallback timer expired on ring sdma0 [77916.639810] [drm] Fence fallback timer expired on ring sdma0 [77917.151804] [drm] Fence fallback timer expired on ring sdma0 [77917.475816] ata3: link is slow to respond, please be patient (ready=0) [77917.663800] [drm] Fence fallback timer expired on ring sdma0 [77918.175789] [drm] Fence fallback timer expired on ring sdma0 [77918.687789] [drm] Fence fallback timer expired on ring sdma0 [77919.199773] [drm] Fence fallback timer expired on ring sdma0 [77919.711771] [drm] Fence fallback timer expired on ring sdma0 [77920.223764] [drm] Fence fallback timer expired on ring sdma0 [77920.735756] [drm] Fence fallback timer expired on ring sdma0 [77921.247746] [drm] Fence fallback timer expired on ring sdma0 [77921.759757] [drm] Fence fallback timer expired on ring sdma0 [77921.924638] [drm] UVD and UVD ENC initialized successfully. [77922.034737] [drm] VCE initialized successfully. [77922.045605] input: Microsoft Xbox Series S|X Controller as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input38 [77922.045686] OOM killer enabled. [77922.045688] Restarting tasks ... [77922.053030] r8152-cfgselector 4-1.4: USB disconnect, device number 4 [77922.059768] done. [77922.059780] random: crng reseeded on system resumption [77922.059920] PM: suspend exit [77922.071990] usb 6-5: USB disconnect, device number 3 [77922.074973] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [77922.076942] Bluetooth: hci0: Device revision is 1 [77922.076949] Bluetooth: hci0: Secure boot is enabled [77922.076950] Bluetooth: hci0: OTP lock is enabled [77922.076952] Bluetooth: hci0: API lock is enabled [77922.076953] Bluetooth: hci0: Debug lock is disabled [77922.076954] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [77922.076961] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [77922.077046] Bluetooth: hci0: Boot Address: 0x24800 [77922.077048] Bluetooth: hci0: Firmware Version: 15-45.22 [77922.163688] ata3: found unknown device (class 0) [77922.165314] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [77922.323697] ata3: softreset failed (device not ready) [77922.591087] r8169 0000:02:00.0 enp2s0: Link is Down [77922.739535] usb 4-1.4: new SuperSpeed USB device number 5 using xhci_hcd [77922.757376] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [77922.757383] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77922.757386] usb 4-1.4: Product: USB 10/100/1000 LAN [77922.757388] usb 4-1.4: Manufacturer: Realtek [77922.757390] usb 4-1.4: SerialNumber: ... [77922.807709] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77922.807719] ata3.00: Entering active power mode [77922.817686] ata3.00: configured for UDMA/133 [77922.879701] usb 6-5: new full-speed USB device number 4 using ohci-pci [77923.091941] usb 6-5: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01 [77923.091947] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77923.091949] usb 6-5: Product: USB Receiver [77923.091951] usb 6-5: Manufacturer: Logitech [77923.100319] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:046D:C548.0009/input/input39 [77923.164001] hid-generic 0003:046D:C548.0009: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-5/input0 [77923.168790] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.000A/input/input40 [77923.168981] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.000A/input/input41 [77923.231812] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:046D:C548.000A/input/input42 [77923.232017] hid-generic 0003:046D:C548.000A: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input1 [77923.235499] hid-generic 0003:046D:C548.000B: hiddev1,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2 [77923.304649] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 5 using xhci_hcd [77925.399722] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx [77925.399734] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [77928.540765] r8152 4-1.4:1.0: load rtl8153a-4 v2 02/07/20 successfully [77928.581187] r8152 4-1.4:1.0 eth0: v1.12.13 [77928.643544] r8152 4-1.4:1.0 enx00e04c6892fa: renamed from eth0 [77928.995032] Bluetooth: hci0: Waiting for firmware download to complete [77928.995985] Bluetooth: hci0: Firmware loaded in 6756957 usecs [77928.996061] Bluetooth: hci0: Waiting for device to boot [77929.014080] Bluetooth: hci0: Device booted in 17664 usecs [77929.014089] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [77929.018038] Bluetooth: hci0: Applying Intel DDC parameters completed [77929.020010] Bluetooth: hci0: Firmware revision 0.3 build 15 week 45 2022 [77929.148289] Bluetooth: MGMT ver 1.22 [78276.103505] iwlwifi 0000:05:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-72.ucode [78276.103520] iwlwifi 0000:05:00.0: api flags index 2 larger than supported by driver [78276.103535] iwlwifi 0000:05:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [78276.104077] iwlwifi 0000:05:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [78276.104087] iwlwifi 0000:05:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [78276.104091] iwlwifi 0000:05:00.0: loaded firmware version 72.daa05125.0 cc-a0-72.ucode op_mode iwlmvm [78276.104111] iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [78276.104188] thermal thermal_zone0: failed to read out thermal zone (-61) [78276.229389] iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100 [78276.295443] iwlwifi 0000:05:00.0: base HW address: 74561AC49122F8A5D2996CF1DE60B68B [78276.330816] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0 [78276.561384] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561392] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561394] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561396] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561397] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561399] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.561401] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797393] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797401] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797403] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797405] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797407] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797409] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78276.797410] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB (0x1001) [78280.255920] wlp5s0: authenticate with 94C1A303F07F89691F66500A4E53515B [78280.258749] wlp5s0: send auth to 94C1A303F07F89691F66500A4E53515B (try 1/3) [78280.303450] wlp5s0: authenticated [78280.306704] wlp5s0: associate with 94C1A303F07F89691F66500A4E53515B (try 1/3) [78280.308319] wlp5s0: RX AssocResp from 94C1A303F07F89691F66500A4E53515B (capab=0x1011 status=0 aid=11) [78280.313929] wlp5s0: associated [78280.314609] wlp5s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 94C1A303F07F89691F66500A4E53515B [78280.411368] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [78380.747569] tun: Universal TUN/TAP device driver, 1.6 [78380.748208] virbr0: port 1(vnet0) entered blocking state [78380.748214] virbr0: port 1(vnet0) entered disabled state [78380.748269] device vnet0 entered promiscuous mode [78380.748589] virbr0: port 1(vnet0) entered blocking state [78380.748593] virbr0: port 1(vnet0) entered listening state [78382.777339] virbr0: port 1(vnet0) entered learning state [78384.797309] virbr0: port 1(vnet0) entered forwarding state [78384.797316] virbr0: topology change detected, propagating [78391.757308] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.757316] ata6.00: irq_stat 0x40000001 [78391.757321] ata6.00: failed command: WRITE DMA [78391.757324] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 12 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.757332] ata6.00: status: { DRDY ERR } [78391.757335] ata6.00: error: { ABRT } [78391.757536] ata6.00: supports DRM functions and may not be fully accessible [78391.760329] ata6.00: supports DRM functions and may not be fully accessible [78391.762847] ata6.00: configured for UDMA/133 (device error ignored) [78391.762864] ata6: EH complete [78391.793312] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.793318] ata6.00: irq_stat 0x40000001 [78391.793322] ata6.00: failed command: WRITE DMA [78391.793325] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 19 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.793333] ata6.00: status: { DRDY ERR } [78391.793335] ata6.00: error: { ABRT } [78391.793532] ata6.00: supports DRM functions and may not be fully accessible [78391.796205] ata6.00: supports DRM functions and may not be fully accessible [78391.798638] ata6.00: configured for UDMA/133 (device error ignored) [78391.798673] ata6: EH complete [78391.833288] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.833294] ata6.00: irq_stat 0x40000001 [78391.833297] ata6.00: failed command: WRITE DMA [78391.833299] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 22 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.833305] ata6.00: status: { DRDY ERR } [78391.833307] ata6.00: error: { ABRT } [78391.833498] ata6.00: supports DRM functions and may not be fully accessible [78391.836161] ata6.00: supports DRM functions and may not be fully accessible [78391.838605] ata6.00: configured for UDMA/133 (device error ignored) [78391.838618] ata6: EH complete [78391.873248] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.873255] ata6.00: irq_stat 0x40000001 [78391.873259] ata6.00: failed command: WRITE DMA [78391.873261] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 31 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.873268] ata6.00: status: { DRDY ERR } [78391.873270] ata6.00: error: { ABRT } [78391.873463] ata6.00: supports DRM functions and may not be fully accessible [78391.876147] ata6.00: supports DRM functions and may not be fully accessible [78391.878599] ata6.00: configured for UDMA/133 (device error ignored) [78391.878613] ata6: EH complete [78391.933283] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.933290] ata6.00: irq_stat 0x40000001 [78391.933292] ata6.00: failed command: WRITE DMA [78391.933294] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 1 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.933300] ata6.00: status: { DRDY ERR } [78391.933302] ata6.00: error: { ABRT } [78391.933497] ata6.00: supports DRM functions and may not be fully accessible [78391.936197] ata6.00: supports DRM functions and may not be fully accessible [78391.938649] ata6.00: configured for UDMA/133 (device error ignored) [78391.938665] ata6: EH complete [78391.981228] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78391.981236] ata6.00: irq_stat 0x40000001 [78391.981239] ata6.00: failed command: WRITE DMA [78391.981241] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 3 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78391.981247] ata6.00: status: { DRDY ERR } [78391.981249] ata6.00: error: { ABRT } [78391.981445] ata6.00: supports DRM functions and may not be fully accessible [78391.984100] ata6.00: supports DRM functions and may not be fully accessible [78391.986568] ata6.00: configured for UDMA/133 (device error ignored) [78391.986587] sd 5:0:0:0: [sdd] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [78391.986590] sd 5:0:0:0: [sdd] tag#3 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#3 Add. Sense: Unaligned write command [78391.986595] sd 5:0:0:0: [sdd] tag#3 CDB: Write(10) 2a 00 00 00 93 01 00 00 01 00 [78391.986596] I/O error, dev sdd, sector 37633 op 0x1:(WRITE) flags 0x8800 phys_seg 1 prio class 2 [78391.986623] ata6: EH complete [78391.986776] ata6.00: Enabling discard_zeroes_data [78391.987167] ata6.00: Enabling discard_zeroes_data [78392.037276] ata6: limiting SATA link speed to 1.5 Gbps [78392.037281] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [78392.037284] ata6.00: irq_stat 0x40000001 [78392.037288] ata6.00: failed command: WRITE DMA [78392.037290] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 13 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.037296] ata6.00: status: { DRDY ERR } [78392.037298] ata6.00: error: { ABRT } [78392.037302] ata6: hard resetting link [78392.513221] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [78392.513435] ata6.00: supports DRM functions and may not be fully accessible [78392.515991] ata6.00: supports DRM functions and may not be fully accessible [78392.518530] ata6.00: configured for UDMA/133 (device error ignored) [78392.518550] ata6: EH complete [78392.585277] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.585285] ata6.00: irq_stat 0x40000001 [78392.585288] ata6.00: failed command: WRITE DMA [78392.585290] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 6 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.585296] ata6.00: status: { DRDY ERR } [78392.585298] ata6.00: error: { ABRT } [78392.585498] ata6.00: supports DRM functions and may not be fully accessible [78392.588203] ata6.00: supports DRM functions and may not be fully accessible [78392.590746] ata6.00: configured for UDMA/133 (device error ignored) [78392.590765] ata6: EH complete [78392.641294] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.641302] ata6.00: irq_stat 0x40000001 [78392.641305] ata6.00: failed command: WRITE DMA [78392.641307] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 14 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.641313] ata6.00: status: { DRDY ERR } [78392.641315] ata6.00: error: { ABRT } [78392.641517] ata6.00: supports DRM functions and may not be fully accessible [78392.644310] ata6.00: supports DRM functions and may not be fully accessible [78392.646883] ata6.00: configured for UDMA/133 (device error ignored) [78392.646902] ata6: EH complete [78392.693300] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.693308] ata6.00: irq_stat 0x40000001 [78392.693311] ata6.00: failed command: WRITE DMA [78392.693313] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 9 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.693319] ata6.00: status: { DRDY ERR } [78392.693321] ata6.00: error: { ABRT } [78392.693526] ata6.00: supports DRM functions and may not be fully accessible [78392.696452] ata6.00: supports DRM functions and may not be fully accessible [78392.698941] ata6.00: configured for UDMA/133 (device error ignored) [78392.698960] ata6: EH complete [78392.753300] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.753307] ata6.00: irq_stat 0x40000001 [78392.753311] ata6.00: failed command: WRITE DMA [78392.753312] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 11 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.753318] ata6.00: status: { DRDY ERR } [78392.753320] ata6.00: error: { ABRT } [78392.753528] ata6.00: supports DRM functions and may not be fully accessible [78392.756360] ata6.00: supports DRM functions and may not be fully accessible [78392.758840] ata6.00: configured for UDMA/133 (device error ignored) [78392.758857] ata6: EH complete [78392.801296] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.801304] ata6.00: irq_stat 0x40000001 [78392.801307] ata6.00: failed command: WRITE DMA [78392.801309] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 16 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.801315] ata6.00: status: { DRDY ERR } [78392.801317] ata6.00: error: { ABRT } [78392.801519] ata6.00: supports DRM functions and may not be fully accessible [78392.804207] ata6.00: supports DRM functions and may not be fully accessible [78392.806762] ata6.00: configured for UDMA/133 (device error ignored) [78392.806782] sd 5:0:0:0: [sdd] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [78392.806786] sd 5:0:0:0: [sdd] tag#16 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#16 Add. Sense: Unaligned write command [78392.806791] sd 5:0:0:0: [sdd] tag#16 CDB: Write(10) 2a 00 00 00 93 01 00 00 01 00 [78392.806792] I/O error, dev sdd, sector 37633 op 0x1:(WRITE) flags 0x8800 phys_seg 1 prio class 2 [78392.806820] ata6: EH complete [78392.807094] ata6.00: Enabling discard_zeroes_data [78392.869230] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [78392.869247] ata6.00: irq_stat 0x40000001 [78392.869250] ata6.00: failed command: WRITE DMA [78392.869252] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 14 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.869262] ata6.00: status: { DRDY ERR } [78392.869268] ata6.00: error: { ABRT } [78392.869471] ata6.00: supports DRM functions and may not be fully accessible [78392.872229] ata6.00: supports DRM functions and may not be fully accessible [78392.874702] ata6.00: configured for UDMA/133 (device error ignored) [78392.874719] ata6: EH complete [78392.929220] ata6.00: limiting speed to UDMA/100:PIO4 [78392.929225] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [78392.929229] ata6.00: irq_stat 0x40000001 [78392.929233] ata6.00: failed command: WRITE DMA [78392.929234] ata6.00: cmd ca/00:01:01:93:00/00:00:00:00:00/e0 tag 21 dma 512 out res 51/04:01:01:93:00/00:00:00:00:00/e0 Emask 0x1 (device error) [78392.929241] ata6.00: status: { DRDY ERR } [78392.929242] ata6.00: error: { ABRT } [78392.929246] ata6: hard resetting link [78393.405283] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [78393.405497] ata6.00: supports DRM functions and may not be fully accessible [78393.408264] ata6.00: supports DRM functions and may not be fully accessible [78393.410889] ata6.00: failed to set xfermode (err_mask=0x1) [78398.425193] ata6: hard resetting link [78398.901216] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [78398.901424] ata6.00: supports DRM functions and may not be fully accessible [78398.903961] ata6.00: supports DRM functions and may not be fully accessible [78398.906603] ata6.00: failed to set xfermode (err_mask=0x1) [78398.906610] ata6.00: limiting speed to UDMA/100:PIO3 [78404.057060] ata6: hard resetting link [78404.533070] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [78404.533283] ata6.00: supports DRM functions and may not be fully accessible [78404.535966] ata6.00: supports DRM functions and may not be fully accessible [78404.538439] ata6.00: failed to set xfermode (err_mask=0x1) [78404.538444] ata6.00: disable device [78404.538470] ata6: EH complete [78404.538506] sd 5:0:0:0: [sdd] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=11s [78404.538510] sd 5:0:0:0: [sdd] tag#15 CDB: Write(10) 2a 00 00 00 93 01 00 00 01 00 [78404.538511] I/O error, dev sdd, sector 37633 op 0x1:(WRITE) flags 0x8800 phys_seg 1 prio class 2 [78404.538633] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [78404.538639] sd 5:0:0:0: [sdd] Sense not available. [78404.538662] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [78404.538664] sd 5:0:0:0: [sdd] Sense not available. [78404.538670] sd 5:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B) [78404.538713] sdd: detected capacity change from 1953525168 to 0 [78457.869252] virbr0: port 1(vnet0) entered disabled state [78457.869785] device vnet0 left promiscuous mode [78457.869789] virbr0: port 1(vnet0) entered disabled state [78458.454181] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [78458.454185] sd 5:0:0:0: [sdd] Sense not available. [78458.454226] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [78458.454229] sd 5:0:0:0: [sdd] Sense not available. [78671.577751] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [78671.578108] ata1.00: configured for UDMA/133 [78672.065656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [78672.086900] ata2.00: configured for UDMA/133 [78672.629706] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [78672.631882] ata3.00: configured for UDMA/133 [78673.125704] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [78673.147882] ata4.00: configured for UDMA/133 [78673.645644] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [78673.645884] ata6.00: failed to read native max address (err_mask=0x1) [78673.645886] ata6.00: HPA support seems broken, skipping HPA handling [78673.645888] ata6.00: supports DRM functions and may not be fully accessible [78673.645890] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [78673.645892] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [78673.648135] ata6.00: Features: Trust Dev-Sleep [78673.648369] ata6.00: supports DRM functions and may not be fully accessible [78673.650802] ata6.00: configured for UDMA/133 (device error ignored) [78673.650825] ata6.00: detaching (SCSI 5:0:0:0) [78673.718000] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [78673.718432] ata6.00: Enabling discard_zeroes_data [78673.718460] sd 5:0:0:0: Attached scsi generic sg4 type 0 [78673.718460] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [78673.718493] sd 5:0:0:0: [sdd] Write Protect is off [78673.718496] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [78673.718523] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [78673.718592] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [78673.719166] ata6.00: Enabling discard_zeroes_data [78673.720690] sdd: sdd1 sdd2 sdd3 sdd4 [78673.722376] sd 5:0:0:0: [sdd] supports TCG Opal [78673.722380] sd 5:0:0:0: [sdd] Attached SCSI disk [78718.204357] virbr0: port 1(vnet1) entered blocking state [78718.204364] virbr0: port 1(vnet1) entered disabled state [78718.204460] device vnet1 entered promiscuous mode [78718.204696] virbr0: port 1(vnet1) entered blocking state [78718.204699] virbr0: port 1(vnet1) entered listening state [78720.213041] virbr0: port 1(vnet1) entered learning state [78722.229027] virbr0: port 1(vnet1) entered forwarding state [78722.229033] virbr0: topology change detected, propagating [79272.906348] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79272.906360] ata6.00: irq_stat 0x40000001 [79272.906362] ata6.00: failed command: WRITE DMA [79272.906364] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 0 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79272.906371] ata6.00: status: { DRDY ERR } [79272.906373] ata6.00: error: { ABRT } [79272.906565] ata6.00: supports DRM functions and may not be fully accessible [79272.909338] ata6.00: supports DRM functions and may not be fully accessible [79272.911795] ata6.00: configured for UDMA/133 (device error ignored) [79272.911814] ata6: EH complete [79272.950431] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79272.950445] ata6.00: irq_stat 0x40000001 [79272.950453] ata6.00: failed command: WRITE DMA [79272.950457] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 15 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79272.950475] ata6.00: status: { DRDY ERR } [79272.950480] ata6.00: error: { ABRT } [79272.950678] ata6.00: supports DRM functions and may not be fully accessible [79272.953395] ata6.00: supports DRM functions and may not be fully accessible [79272.955801] ata6.00: configured for UDMA/133 (device error ignored) [79272.955816] ata6: EH complete [79272.955958] ata6.00: Enabling discard_zeroes_data [79272.956173] ata6.00: Enabling discard_zeroes_data [79272.994399] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79272.994405] ata6.00: irq_stat 0x40000001 [79272.994409] ata6.00: failed command: WRITE DMA [79272.994411] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 23 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79272.994418] ata6.00: status: { DRDY ERR } [79272.994419] ata6.00: error: { ABRT } [79272.994611] ata6.00: supports DRM functions and may not be fully accessible [79272.997317] ata6.00: supports DRM functions and may not be fully accessible [79272.999773] ata6.00: configured for UDMA/133 (device error ignored) [79272.999792] ata6: EH complete [79273.038342] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.038358] ata6.00: irq_stat 0x40000001 [79273.038362] ata6.00: failed command: WRITE DMA [79273.038364] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 17 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79273.038370] ata6.00: status: { DRDY ERR } [79273.038372] ata6.00: error: { ABRT } [79273.038566] ata6.00: supports DRM functions and may not be fully accessible [79273.041224] ata6.00: supports DRM functions and may not be fully accessible [79273.043696] ata6.00: configured for UDMA/133 (device error ignored) [79273.043715] ata6: EH complete [79273.102407] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.102415] ata6.00: irq_stat 0x40000001 [79273.102418] ata6.00: failed command: WRITE DMA [79273.102420] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 19 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79273.102426] ata6.00: status: { DRDY ERR } [79273.102428] ata6.00: error: { ABRT } [79273.102621] ata6.00: supports DRM functions and may not be fully accessible [79273.105288] ata6.00: supports DRM functions and may not be fully accessible [79273.107744] ata6.00: configured for UDMA/133 (device error ignored) [79273.107776] ata6: EH complete [79273.154308] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.154318] ata6.00: irq_stat 0x40000001 [79273.154321] ata6.00: failed command: WRITE DMA [79273.154323] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 23 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79273.154329] ata6.00: status: { DRDY ERR } [79273.154331] ata6.00: error: { ABRT } [79273.154530] ata6.00: supports DRM functions and may not be fully accessible [79273.157209] ata6.00: supports DRM functions and may not be fully accessible [79273.159680] ata6.00: configured for UDMA/133 (device error ignored) [79273.159725] sd 5:0:0:0: [sdd] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79273.159734] sd 5:0:0:0: [sdd] tag#23 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#23 Add. Sense: Unaligned write command [79273.159748] sd 5:0:0:0: [sdd] tag#23 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79273.159752] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79273.159800] ata6: EH complete [79273.206390] ata6: limiting SATA link speed to 3.0 Gbps [79273.206400] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79273.206409] ata6.00: irq_stat 0x40000001 [79273.206416] ata6.00: failed command: WRITE DMA EXT [79273.206422] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 6 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.206439] ata6.00: status: { DRDY ERR } [79273.206445] ata6.00: error: { ABRT } [79273.206455] ata6: hard resetting link [79273.682379] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [79273.682593] ata6.00: supports DRM functions and may not be fully accessible [79273.685122] ata6.00: supports DRM functions and may not be fully accessible [79273.687662] ata6.00: configured for UDMA/133 (device error ignored) [79273.687703] ata6: EH complete [79273.722371] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.722386] ata6.00: irq_stat 0x40000001 [79273.722398] ata6.00: failed command: WRITE DMA EXT [79273.722404] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 21 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.722422] ata6.00: status: { DRDY ERR } [79273.722428] ata6.00: error: { ABRT } [79273.722624] ata6.00: supports DRM functions and may not be fully accessible [79273.725288] ata6.00: supports DRM functions and may not be fully accessible [79273.727742] ata6.00: configured for UDMA/133 (device error ignored) [79273.727774] ata6: EH complete [79273.758300] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.758304] ata6.00: irq_stat 0x40000001 [79273.758307] ata6.00: failed command: WRITE DMA EXT [79273.758308] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 8 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.758314] ata6.00: status: { DRDY ERR } [79273.758316] ata6.00: error: { ABRT } [79273.758510] ata6.00: supports DRM functions and may not be fully accessible [79273.761233] ata6.00: supports DRM functions and may not be fully accessible [79273.763762] ata6.00: configured for UDMA/133 (device error ignored) [79273.763780] ata6: EH complete [79273.814363] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.814368] ata6.00: irq_stat 0x40000001 [79273.814371] ata6.00: failed command: WRITE DMA EXT [79273.814373] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 21 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.814379] ata6.00: status: { DRDY ERR } [79273.814381] ata6.00: error: { ABRT } [79273.814573] ata6.00: supports DRM functions and may not be fully accessible [79273.817246] ata6.00: supports DRM functions and may not be fully accessible [79273.819712] ata6.00: configured for UDMA/133 (device error ignored) [79273.819731] ata6: EH complete [79273.850371] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.850375] ata6.00: irq_stat 0x40000001 [79273.850378] ata6.00: failed command: WRITE DMA EXT [79273.850380] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 23 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.850386] ata6.00: status: { DRDY ERR } [79273.850388] ata6.00: error: { ABRT } [79273.850579] ata6.00: supports DRM functions and may not be fully accessible [79273.853367] ata6.00: supports DRM functions and may not be fully accessible [79273.855801] ata6.00: configured for UDMA/133 (device error ignored) [79273.855816] ata6: EH complete [79273.890421] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.890434] ata6.00: irq_stat 0x40000001 [79273.890446] ata6.00: failed command: WRITE DMA EXT [79273.890450] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 25 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79273.890456] ata6.00: status: { DRDY ERR } [79273.890458] ata6.00: error: { ABRT } [79273.890649] ata6.00: supports DRM functions and may not be fully accessible [79273.893308] ata6.00: supports DRM functions and may not be fully accessible [79273.895777] ata6.00: configured for UDMA/133 (device error ignored) [79273.895796] sd 5:0:0:0: [sdd] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79273.895799] sd 5:0:0:0: [sdd] tag#25 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#25 Add. Sense: Unaligned write command [79273.895812] sd 5:0:0:0: [sdd] tag#25 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79273.895813] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79273.895846] ata6: EH complete [79273.896386] ata6.00: Enabling discard_zeroes_data [79273.938371] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79273.938387] ata6.00: irq_stat 0x40000001 [79273.938396] ata6.00: failed command: WRITE DMA [79273.938401] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 20 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79273.938419] ata6.00: status: { DRDY ERR } [79273.938424] ata6.00: error: { ABRT } [79273.938644] ata6.00: supports DRM functions and may not be fully accessible [79273.941317] ata6.00: supports DRM functions and may not be fully accessible [79273.943782] ata6.00: configured for UDMA/133 (device error ignored) [79273.943816] ata6: EH complete [79273.986372] ata6: limiting SATA link speed to 1.5 Gbps [79273.986385] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79273.986397] ata6.00: irq_stat 0x40000001 [79273.986406] ata6.00: failed command: WRITE DMA [79273.986410] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 22 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79273.986428] ata6.00: status: { DRDY ERR } [79273.986434] ata6.00: error: { ABRT } [79273.986442] ata6: hard resetting link [79274.462336] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79274.462541] ata6.00: supports DRM functions and may not be fully accessible [79274.465179] ata6.00: supports DRM functions and may not be fully accessible [79274.467711] ata6.00: configured for UDMA/133 (device error ignored) [79274.467730] ata6: EH complete [79274.506362] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.506376] ata6.00: irq_stat 0x40000001 [79274.506385] ata6.00: failed command: WRITE DMA [79274.506390] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 26 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79274.506408] ata6.00: status: { DRDY ERR } [79274.506413] ata6.00: error: { ABRT } [79274.506613] ata6.00: supports DRM functions and may not be fully accessible [79274.509312] ata6.00: supports DRM functions and may not be fully accessible [79274.511818] ata6.00: configured for UDMA/133 (device error ignored) [79274.511835] ata6: EH complete [79274.546354] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.546367] ata6.00: irq_stat 0x40000001 [79274.546376] ata6.00: failed command: WRITE DMA [79274.546381] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 28 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79274.546399] ata6.00: status: { DRDY ERR } [79274.546405] ata6.00: error: { ABRT } [79274.546629] ata6.00: supports DRM functions and may not be fully accessible [79274.549392] ata6.00: supports DRM functions and may not be fully accessible [79274.551872] ata6.00: configured for UDMA/133 (device error ignored) [79274.551887] ata6: EH complete [79274.598361] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.598374] ata6.00: irq_stat 0x40000001 [79274.598384] ata6.00: failed command: WRITE DMA [79274.598389] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 30 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79274.598406] ata6.00: status: { DRDY ERR } [79274.598412] ata6.00: error: { ABRT } [79274.598613] ata6.00: supports DRM functions and may not be fully accessible [79274.601310] ata6.00: supports DRM functions and may not be fully accessible [79274.603772] ata6.00: configured for UDMA/133 (device error ignored) [79274.603790] ata6: EH complete [79274.642349] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.642354] ata6.00: irq_stat 0x40000001 [79274.642356] ata6.00: failed command: WRITE DMA [79274.642358] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 0 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79274.642364] ata6.00: status: { DRDY ERR } [79274.642366] ata6.00: error: { ABRT } [79274.642562] ata6.00: supports DRM functions and may not be fully accessible [79274.645350] ata6.00: supports DRM functions and may not be fully accessible [79274.647844] ata6.00: configured for UDMA/133 (device error ignored) [79274.647861] sd 5:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79274.647865] sd 5:0:0:0: [sdd] tag#0 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#0 Add. Sense: Unaligned write command [79274.647869] sd 5:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79274.647871] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79274.647895] ata6: EH complete [79274.702359] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.702375] ata6.00: irq_stat 0x40000001 [79274.702384] ata6.00: failed command: WRITE DMA EXT [79274.702390] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 2 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79274.702408] ata6.00: status: { DRDY ERR } [79274.702414] ata6.00: error: { ABRT } [79274.702619] ata6.00: supports DRM functions and may not be fully accessible [79274.705290] ata6.00: supports DRM functions and may not be fully accessible [79274.707770] ata6.00: configured for UDMA/133 (device error ignored) [79274.707783] ata6: EH complete [79274.750287] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79274.750291] ata6.00: irq_stat 0x40000001 [79274.750294] ata6.00: failed command: WRITE DMA EXT [79274.750296] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 4 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79274.750301] ata6.00: status: { DRDY ERR } [79274.750303] ata6.00: error: { ABRT } [79274.750506] ata6.00: supports DRM functions and may not be fully accessible [79274.753210] ata6.00: supports DRM functions and may not be fully accessible [79274.755657] ata6.00: configured for UDMA/133 (device error ignored) [79274.755671] ata6: EH complete [79274.786357] ata6.00: limiting speed to UDMA/100:PIO4 [79274.786367] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79274.786375] ata6.00: irq_stat 0x40000001 [79274.786382] ata6.00: failed command: WRITE DMA EXT [79274.786387] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 6 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79274.786404] ata6.00: status: { DRDY ERR } [79274.786410] ata6.00: error: { ABRT } [79274.786420] ata6: hard resetting link [79275.262353] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79275.262597] ata6.00: supports DRM functions and may not be fully accessible [79275.265187] ata6.00: supports DRM functions and may not be fully accessible [79275.267701] ata6.00: failed to set xfermode (err_mask=0x1) [79280.338217] ata6: hard resetting link [79280.818215] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79280.818426] ata6.00: supports DRM functions and may not be fully accessible [79280.820989] ata6.00: supports DRM functions and may not be fully accessible [79280.823595] ata6.00: failed to set xfermode (err_mask=0x1) [79280.823601] ata6.00: limiting speed to UDMA/100:PIO3 [79285.970191] ata6: hard resetting link [79286.446196] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79286.446407] ata6.00: supports DRM functions and may not be fully accessible [79286.448963] ata6.00: supports DRM functions and may not be fully accessible [79286.451528] ata6.00: failed to set xfermode (err_mask=0x1) [79286.451535] ata6.00: disable device [79286.451561] ata6: EH complete [79286.451607] sd 5:0:0:0: [sdd] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=11s [79286.451611] sd 5:0:0:0: [sdd] tag#2 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79286.451613] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79286.451642] sd 5:0:0:0: [sdd] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451644] sd 5:0:0:0: [sdd] tag#3 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79286.451646] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79286.451688] sd 5:0:0:0: [sdd] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451694] sd 5:0:0:0: [sdd] tag#23 CDB: Read(10) 28 00 00 03 a8 20 00 00 08 00 [79286.451696] I/O error, dev sdd, sector 239648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79286.451722] sd 5:0:0:0: [sdd] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451725] sd 5:0:0:0: [sdd] tag#24 CDB: Read(10) 28 00 00 03 a8 20 00 00 08 00 [79286.451726] I/O error, dev sdd, sector 239648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79286.451752] sd 5:0:0:0: [sdd] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451754] sd 5:0:0:0: [sdd] tag#26 CDB: Read(10) 28 00 74 60 98 20 00 00 08 00 [79286.451756] I/O error, dev sdd, sector 1952487456 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79286.451779] sd 5:0:0:0: [sdd] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451782] sd 5:0:0:0: [sdd] tag#28 CDB: Read(10) 28 00 00 03 28 00 00 00 08 00 [79286.451783] I/O error, dev sdd, sector 206848 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79286.451805] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79286.451807] sd 5:0:0:0: [sdd] Sense not available. [79286.451838] sd 5:0:0:0: [sdd] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451843] sd 5:0:0:0: [sdd] tag#30 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79286.451844] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79286.451876] sd 5:0:0:0: [sdd] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79286.451879] sd 5:0:0:0: [sdd] tag#4 CDB: Read(10) 28 00 00 00 08 20 00 00 08 00 [79286.451881] I/O error, dev sdd, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79286.451903] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79286.451905] sd 5:0:0:0: [sdd] Sense not available. [79286.451911] sd 5:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B) [79286.451963] sdd: detected capacity change from 1953525168 to 0 [79337.209962] sd 5:0:0:0: [sdd] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79337.209968] sd 5:0:0:0: [sdd] tag#7 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 [79417.897445] virbr0: port 1(vnet1) entered disabled state [79417.897926] device vnet1 left promiscuous mode [79417.897931] virbr0: port 1(vnet1) entered disabled state [79418.486033] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79418.486039] sd 5:0:0:0: [sdd] Sense not available. [79418.486066] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79418.486068] sd 5:0:0:0: [sdd] Sense not available. [79425.004554] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79425.004933] ata1.00: configured for UDMA/133 [79425.488473] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79425.509590] ata2.00: configured for UDMA/133 [79426.060534] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79426.062895] ata3.00: configured for UDMA/133 [79426.548462] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79426.570648] ata4.00: configured for UDMA/133 [79427.072525] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79427.072806] ata6.00: failed to read native max address (err_mask=0x1) [79427.072808] ata6.00: HPA support seems broken, skipping HPA handling [79427.072810] ata6.00: supports DRM functions and may not be fully accessible [79427.072812] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [79427.072814] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [79427.075075] ata6.00: Features: Trust Dev-Sleep [79427.075306] ata6.00: supports DRM functions and may not be fully accessible [79427.077776] ata6.00: configured for UDMA/133 (device error ignored) [79427.077820] ata6.00: detaching (SCSI 5:0:0:0) [79427.148722] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [79427.149111] sd 5:0:0:0: Attached scsi generic sg4 type 0 [79427.149149] ata6.00: Enabling discard_zeroes_data [79427.149203] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [79427.149224] sd 5:0:0:0: [sdd] Write Protect is off [79427.149227] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [79427.149251] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [79427.149301] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [79427.149755] ata6.00: Enabling discard_zeroes_data [79427.151409] sdd: sdd1 sdd2 sdd3 sdd4 [79427.152658] sd 5:0:0:0: [sdd] supports TCG Opal [79427.152663] sd 5:0:0:0: [sdd] Attached SCSI disk [79434.860438] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79434.860445] ata6.00: irq_stat 0x40000001 [79434.860448] ata6.00: failed command: FLUSH CACHE EXT [79434.860450] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 11 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79434.860456] ata6.00: status: { DRDY ERR } [79434.860458] ata6.00: error: { ABRT } [79434.860650] ata6.00: supports DRM functions and may not be fully accessible [79434.863336] ata6.00: supports DRM functions and may not be fully accessible [79434.865758] ata6.00: configured for UDMA/133 (device error ignored) [79434.865764] ata6.00: device reported invalid CHS sector 0 [79434.865777] ata6: EH complete [79434.924372] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79434.924383] ata6.00: irq_stat 0x40000001 [79434.924386] ata6.00: failed command: FLUSH CACHE EXT [79434.924388] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 13 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79434.924394] ata6.00: status: { DRDY ERR } [79434.924396] ata6.00: error: { ABRT } [79434.924581] ata6.00: supports DRM functions and may not be fully accessible [79434.927216] ata6.00: supports DRM functions and may not be fully accessible [79434.929635] ata6.00: configured for UDMA/133 (device error ignored) [79434.929641] ata6.00: device reported invalid CHS sector 0 [79434.929653] ata6: EH complete [79434.976367] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79434.976374] ata6.00: irq_stat 0x40000001 [79434.976379] ata6.00: failed command: FLUSH CACHE EXT [79434.976389] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 15 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79434.976396] ata6.00: status: { DRDY ERR } [79434.976397] ata6.00: error: { ABRT } [79434.976593] ata6.00: supports DRM functions and may not be fully accessible [79434.979210] ata6.00: supports DRM functions and may not be fully accessible [79434.981711] ata6.00: configured for UDMA/133 (device error ignored) [79434.981716] ata6.00: device reported invalid CHS sector 0 [79434.981731] ata6: EH complete [79435.044370] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79435.044381] ata6.00: irq_stat 0x40000001 [79435.044384] ata6.00: failed command: FLUSH CACHE EXT [79435.044386] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79435.044392] ata6.00: status: { DRDY ERR } [79435.044394] ata6.00: error: { ABRT } [79435.044588] ata6.00: supports DRM functions and may not be fully accessible [79435.047416] ata6.00: supports DRM functions and may not be fully accessible [79435.049848] ata6.00: configured for UDMA/133 (device error ignored) [79435.049873] ata6.00: device reported invalid CHS sector 0 [79435.049888] ata6: EH complete [79435.104359] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79435.104366] ata6.00: irq_stat 0x40000001 [79435.104370] ata6.00: failed command: FLUSH CACHE EXT [79435.104372] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 18 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79435.104382] ata6.00: status: { DRDY ERR } [79435.104384] ata6.00: error: { ABRT } [79435.104577] ata6.00: supports DRM functions and may not be fully accessible [79435.107197] ata6.00: supports DRM functions and may not be fully accessible [79435.109652] ata6.00: configured for UDMA/133 (device error ignored) [79435.109658] ata6.00: device reported invalid CHS sector 0 [79435.109673] ata6: EH complete [79435.172361] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79435.172369] ata6.00: irq_stat 0x40000001 [79435.172372] ata6.00: failed command: FLUSH CACHE EXT [79435.172374] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 15 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79435.172380] ata6.00: status: { DRDY ERR } [79435.172382] ata6.00: error: { ABRT } [79435.172577] ata6.00: supports DRM functions and may not be fully accessible [79435.175268] ata6.00: supports DRM functions and may not be fully accessible [79435.177777] ata6.00: configured for UDMA/133 (device error ignored) [79435.177783] ata6.00: device reported invalid CHS sector 0 [79435.177798] sd 5:0:0:0: [sdd] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79435.177802] sd 5:0:0:0: [sdd] tag#15 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#15 Add. Sense: Unaligned write command [79435.177807] sd 5:0:0:0: [sdd] tag#15 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [79435.177812] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [79435.177824] ata6: EH complete [79435.178011] ata6.00: Enabling discard_zeroes_data [79435.178273] ata6.00: Enabling discard_zeroes_data [79438.736397] ata6: limiting SATA link speed to 3.0 Gbps [79438.736402] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79438.736406] ata6.00: irq_stat 0x40000001 [79438.736409] ata6.00: failed command: FLUSH CACHE EXT [79438.736411] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 22 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79438.736417] ata6.00: status: { DRDY ERR } [79438.736419] ata6.00: error: { ABRT } [79438.736423] ata6: hard resetting link [79439.220324] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [79439.220542] ata6.00: supports DRM functions and may not be fully accessible [79439.223056] ata6.00: supports DRM functions and may not be fully accessible [79439.225623] ata6.00: configured for UDMA/133 (device error ignored) [79439.225633] ata6.00: device reported invalid CHS sector 0 [79439.225653] ata6: EH complete [79439.292312] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79439.292322] ata6.00: irq_stat 0x40000001 [79439.292326] ata6.00: failed command: FLUSH CACHE EXT [79439.292328] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 23 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79439.292336] ata6.00: status: { DRDY ERR } [79439.292338] ata6.00: error: { ABRT } [79439.292535] ata6.00: supports DRM functions and may not be fully accessible [79439.295212] ata6.00: supports DRM functions and may not be fully accessible [79439.297916] ata6.00: configured for UDMA/133 (device error ignored) [79439.297925] ata6.00: device reported invalid CHS sector 0 [79439.297944] ata6: EH complete [79439.352328] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79439.352337] ata6.00: irq_stat 0x40000001 [79439.352340] ata6.00: failed command: FLUSH CACHE EXT [79439.352341] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79439.352347] ata6.00: status: { DRDY ERR } [79439.352349] ata6.00: error: { ABRT } [79439.352548] ata6.00: supports DRM functions and may not be fully accessible [79439.355251] ata6.00: supports DRM functions and may not be fully accessible [79439.357717] ata6.00: configured for UDMA/133 (device error ignored) [79439.357724] ata6.00: device reported invalid CHS sector 0 [79439.357739] ata6: EH complete [79439.424323] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79439.424340] ata6.00: irq_stat 0x40000001 [79439.424343] ata6.00: failed command: FLUSH CACHE EXT [79439.424345] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 23 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79439.424357] ata6.00: status: { DRDY ERR } [79439.424359] ata6.00: error: { ABRT } [79439.424557] ata6.00: supports DRM functions and may not be fully accessible [79439.427276] ata6.00: supports DRM functions and may not be fully accessible [79439.429769] ata6.00: configured for UDMA/133 (device error ignored) [79439.429775] ata6.00: device reported invalid CHS sector 0 [79439.429790] ata6: EH complete [79439.492377] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79439.492384] ata6.00: irq_stat 0x40000001 [79439.492387] ata6.00: failed command: FLUSH CACHE EXT [79439.492389] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 16 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79439.492395] ata6.00: status: { DRDY ERR } [79439.492397] ata6.00: error: { ABRT } [79439.492594] ata6.00: supports DRM functions and may not be fully accessible [79439.495290] ata6.00: supports DRM functions and may not be fully accessible [79439.497756] ata6.00: configured for UDMA/133 (device error ignored) [79439.497761] ata6.00: device reported invalid CHS sector 0 [79439.497775] ata6: EH complete [79439.536358] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79439.536365] ata6.00: irq_stat 0x40000001 [79439.536368] ata6.00: failed command: FLUSH CACHE EXT [79439.536369] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79439.536375] ata6.00: status: { DRDY ERR } [79439.536377] ata6.00: error: { ABRT } [79439.536575] ata6.00: supports DRM functions and may not be fully accessible [79439.539267] ata6.00: supports DRM functions and may not be fully accessible [79439.541748] ata6.00: configured for UDMA/133 (device error ignored) [79439.541754] ata6.00: device reported invalid CHS sector 0 [79439.541770] sd 5:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79439.541774] sd 5:0:0:0: [sdd] tag#0 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#0 Add. Sense: Unaligned write command [79439.541779] sd 5:0:0:0: [sdd] tag#0 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [79439.541783] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [79439.541795] ata6: EH complete [79439.541932] ata6.00: Enabling discard_zeroes_data [79439.542139] ata6.00: Enabling discard_zeroes_data [79445.736287] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79445.736294] ata6.00: irq_stat 0x40000001 [79445.736297] ata6.00: failed command: FLUSH CACHE EXT [79445.736299] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 23 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79445.736305] ata6.00: status: { DRDY ERR } [79445.736307] ata6.00: error: { ABRT } [79445.736505] ata6.00: supports DRM functions and may not be fully accessible [79445.739213] ata6.00: supports DRM functions and may not be fully accessible [79445.741630] ata6.00: configured for UDMA/133 (device error ignored) [79445.741635] ata6.00: device reported invalid CHS sector 0 [79445.741650] ata6: EH complete [79445.796237] ata6: limiting SATA link speed to 1.5 Gbps [79445.796242] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79445.796246] ata6.00: irq_stat 0x40000001 [79445.796260] ata6.00: failed command: FLUSH CACHE EXT [79445.796262] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 25 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79445.796268] ata6.00: status: { DRDY ERR } [79445.796270] ata6.00: error: { ABRT } [79445.796277] ata6: hard resetting link [79446.276230] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79446.276445] ata6.00: supports DRM functions and may not be fully accessible [79446.278980] ata6.00: supports DRM functions and may not be fully accessible [79446.281462] ata6.00: configured for UDMA/133 (device error ignored) [79446.281467] ata6.00: device reported invalid CHS sector 0 [79446.281482] ata6: EH complete [79446.340224] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79446.340231] ata6.00: irq_stat 0x40000001 [79446.340235] ata6.00: failed command: FLUSH CACHE EXT [79446.340236] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 27 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79446.340243] ata6.00: status: { DRDY ERR } [79446.340245] ata6.00: error: { ABRT } [79446.340444] ata6.00: supports DRM functions and may not be fully accessible [79446.343137] ata6.00: supports DRM functions and may not be fully accessible [79446.345607] ata6.00: configured for UDMA/133 (device error ignored) [79446.345612] ata6.00: device reported invalid CHS sector 0 [79446.345628] ata6: EH complete [79446.420231] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79446.420238] ata6.00: irq_stat 0x40000001 [79446.420252] ata6.00: failed command: FLUSH CACHE EXT [79446.420254] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 19 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79446.420260] ata6.00: status: { DRDY ERR } [79446.420262] ata6.00: error: { ABRT } [79446.420467] ata6.00: supports DRM functions and may not be fully accessible [79446.423234] ata6.00: supports DRM functions and may not be fully accessible [79446.425775] ata6.00: configured for UDMA/133 (device error ignored) [79446.425781] ata6.00: device reported invalid CHS sector 0 [79446.425796] ata6: EH complete [79446.472224] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79446.472232] ata6.00: irq_stat 0x40000001 [79446.472234] ata6.00: failed command: FLUSH CACHE EXT [79446.472236] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 2 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79446.472242] ata6.00: status: { DRDY ERR } [79446.472244] ata6.00: error: { ABRT } [79446.472447] ata6.00: supports DRM functions and may not be fully accessible [79446.475214] ata6.00: supports DRM functions and may not be fully accessible [79446.477735] ata6.00: configured for UDMA/133 (device error ignored) [79446.477742] ata6.00: device reported invalid CHS sector 0 [79446.477757] ata6: EH complete [79446.528223] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79446.528230] ata6.00: irq_stat 0x40000001 [79446.528233] ata6.00: failed command: FLUSH CACHE EXT [79446.528234] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 4 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79446.528241] ata6.00: status: { DRDY ERR } [79446.528243] ata6.00: error: { ABRT } [79446.528446] ata6.00: supports DRM functions and may not be fully accessible [79446.531160] ata6.00: supports DRM functions and may not be fully accessible [79446.533662] ata6.00: configured for UDMA/133 (device error ignored) [79446.533668] ata6.00: device reported invalid CHS sector 0 [79446.533684] sd 5:0:0:0: [sdd] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79446.533687] sd 5:0:0:0: [sdd] tag#4 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#4 Add. Sense: Unaligned write command [79446.533692] sd 5:0:0:0: [sdd] tag#4 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [79446.533697] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [79446.533707] ata6: EH complete [79446.533825] ata6.00: Enabling discard_zeroes_data [79446.534039] ata6.00: Enabling discard_zeroes_data [79447.864262] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79447.864270] ata6.00: irq_stat 0x40000001 [79447.864273] ata6.00: failed command: FLUSH CACHE EXT [79447.864275] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 28 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79447.864281] ata6.00: status: { DRDY ERR } [79447.864283] ata6.00: error: { ABRT } [79447.864485] ata6.00: supports DRM functions and may not be fully accessible [79447.867235] ata6.00: supports DRM functions and may not be fully accessible [79447.869755] ata6.00: configured for UDMA/133 (device error ignored) [79447.869761] ata6.00: device reported invalid CHS sector 0 [79447.869777] ata6: EH complete [79447.944265] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79447.944273] ata6.00: irq_stat 0x40000001 [79447.944275] ata6.00: failed command: FLUSH CACHE EXT [79447.944277] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 6 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79447.944283] ata6.00: status: { DRDY ERR } [79447.944285] ata6.00: error: { ABRT } [79447.944493] ata6.00: supports DRM functions and may not be fully accessible [79447.947330] ata6.00: supports DRM functions and may not be fully accessible [79447.949800] ata6.00: configured for UDMA/133 (device error ignored) [79447.949806] ata6.00: device reported invalid CHS sector 0 [79447.949820] ata6: EH complete [79447.996275] ata6.00: limiting speed to UDMA/100:PIO4 [79447.996280] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79447.996284] ata6.00: irq_stat 0x40000001 [79447.996287] ata6.00: failed command: FLUSH CACHE EXT [79447.996288] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 1 res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [79447.996295] ata6.00: status: { DRDY ERR } [79447.996296] ata6.00: error: { ABRT } [79447.996300] ata6: hard resetting link [79448.480205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79448.480419] ata6.00: supports DRM functions and may not be fully accessible [79448.482962] ata6.00: supports DRM functions and may not be fully accessible [79448.485428] ata6.00: failed to set xfermode (err_mask=0x1) [79453.648129] ata6: hard resetting link [79454.128131] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79454.128340] ata6.00: supports DRM functions and may not be fully accessible [79454.130878] ata6.00: supports DRM functions and may not be fully accessible [79454.133329] ata6.00: failed to set xfermode (err_mask=0x1) [79454.133334] ata6.00: limiting speed to UDMA/100:PIO3 [79459.280070] ata6: hard resetting link [79459.760145] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79459.760353] ata6.00: supports DRM functions and may not be fully accessible [79459.762892] ata6.00: supports DRM functions and may not be fully accessible [79459.765395] ata6.00: failed to set xfermode (err_mask=0x1) [79459.765400] ata6.00: disable device [79459.765422] ata6: EH complete [79459.765456] sd 5:0:0:0: [sdd] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=11s [79459.765461] sd 5:0:0:0: [sdd] tag#8 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [79459.765464] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [79459.765545] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79459.765550] sd 5:0:0:0: [sdd] Sense not available. [79459.765572] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79459.765574] sd 5:0:0:0: [sdd] Sense not available. [79459.765580] sd 5:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B) [79459.765624] sdd: detected capacity change from 1953525168 to 0 [79461.321647] sd 5:0:0:0: [sdd] tag#20 access beyond end of device [79461.321657] I/O error, dev sdd, sector 1953521536 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [79461.321684] sd 5:0:0:0: [sdd] tag#21 access beyond end of device [79461.321687] I/O error, dev sdd, sector 1953521536 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79461.321691] Buffer I/O error on dev sdd4, logical block 129264, async page read [79461.836758] sde: [79461.881104] sde: [79470.840847] sd 5:0:0:0: [sdd] tag#18 access beyond end of device [79470.840855] I/O error, dev sdd, sector 1952485248 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [79470.840876] sd 5:0:0:0: [sdd] tag#19 access beyond end of device [79470.840878] I/O error, dev sdd, sector 1952485248 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840882] Buffer I/O error on dev sdd3, logical block 1952245632, async page read [79470.840893] sd 5:0:0:0: [sdd] tag#22 access beyond end of device [79470.840895] I/O error, dev sdd, sector 1952485249 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840898] Buffer I/O error on dev sdd3, logical block 1952245633, async page read [79470.840908] sd 5:0:0:0: [sdd] tag#23 access beyond end of device [79470.840910] I/O error, dev sdd, sector 1952485250 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840912] Buffer I/O error on dev sdd3, logical block 1952245634, async page read [79470.840922] sd 5:0:0:0: [sdd] tag#27 access beyond end of device [79470.840924] I/O error, dev sdd, sector 1952485251 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840927] Buffer I/O error on dev sdd3, logical block 1952245635, async page read [79470.840936] sd 5:0:0:0: [sdd] tag#31 access beyond end of device [79470.840938] I/O error, dev sdd, sector 1952485252 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840941] Buffer I/O error on dev sdd3, logical block 1952245636, async page read [79470.840950] sd 5:0:0:0: [sdd] tag#0 access beyond end of device [79470.840952] I/O error, dev sdd, sector 1952485253 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840955] Buffer I/O error on dev sdd3, logical block 1952245637, async page read [79470.840964] sd 5:0:0:0: [sdd] tag#1 access beyond end of device [79470.840966] I/O error, dev sdd, sector 1952485254 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840969] Buffer I/O error on dev sdd3, logical block 1952245638, async page read [79470.840979] sd 5:0:0:0: [sdd] tag#2 access beyond end of device [79470.840981] I/O error, dev sdd, sector 1952485255 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79470.840984] Buffer I/O error on dev sdd3, logical block 1952245639, async page read [79470.841788] sd 5:0:0:0: [sdd] tag#17 access beyond end of device [79470.841794] I/O error, dev sdd, sector 239488 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [79470.841813] sd 5:0:0:0: [sdd] tag#18 access beyond end of device [79470.841816] Buffer I/O error on dev sdd2, logical block 4080, async page read [79470.842543] sd 5:0:0:0: [sdd] tag#21 access beyond end of device [79470.842571] sd 5:0:0:0: [sdd] tag#22 access beyond end of device [79470.842576] Buffer I/O error on dev sdd1, logical block 25584, async page read [79470.886215] sd 5:0:0:0: [sdd] tag#24 access beyond end of device [79470.886242] sd 5:0:0:0: [sdd] tag#25 access beyond end of device [79470.886271] sd 5:0:0:0: [sdd] tag#26 access beyond end of device [79470.886283] sd 5:0:0:0: [sdd] tag#27 access beyond end of device [79470.886295] sd 5:0:0:0: [sdd] tag#28 access beyond end of device [79470.886307] sd 5:0:0:0: [sdd] tag#29 access beyond end of device [79470.886320] sd 5:0:0:0: [sdd] tag#30 access beyond end of device [79470.886332] sd 5:0:0:0: [sdd] tag#3 access beyond end of device [79470.886345] sd 5:0:0:0: [sdd] tag#4 access beyond end of device [79470.887293] sd 5:0:0:0: [sdd] tag#5 access beyond end of device [79470.887319] sd 5:0:0:0: [sdd] tag#6 access beyond end of device [79470.888833] sd 5:0:0:0: [sdd] tag#5 access beyond end of device [79470.888853] sd 5:0:0:0: [sdd] tag#6 access beyond end of device [79470.889085] sd 5:0:0:0: [sdd] tag#9 access beyond end of device [79470.889110] sd 5:0:0:0: [sdd] tag#10 access beyond end of device [79472.843906] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79472.844197] ata1.00: configured for UDMA/133 [79473.327971] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79473.351212] ata2.00: configured for UDMA/133 [79473.899888] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79473.902090] ata3.00: configured for UDMA/133 [79474.395899] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79474.418090] ata4.00: configured for UDMA/133 [79474.911952] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79474.912203] ata6.00: failed to read native max address (err_mask=0x1) [79474.912205] ata6.00: HPA support seems broken, skipping HPA handling [79474.912207] ata6.00: supports DRM functions and may not be fully accessible [79474.912208] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [79474.912210] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [79474.914465] ata6.00: Features: Trust Dev-Sleep [79474.914693] ata6.00: supports DRM functions and may not be fully accessible [79474.917125] ata6.00: configured for UDMA/133 (device error ignored) [79474.917159] ata6.00: detaching (SCSI 5:0:0:0) [79474.972380] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [79474.972751] sd 5:0:0:0: Attached scsi generic sg4 type 0 [79474.972772] ata6.00: Enabling discard_zeroes_data [79474.972787] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [79474.972815] sd 5:0:0:0: [sdd] Write Protect is off [79474.972821] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [79474.972868] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [79474.972937] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [79474.973325] ata6.00: Enabling discard_zeroes_data [79474.974861] sdd: sdd1 sdd2 sdd3 sdd4 [79474.976087] sd 5:0:0:0: [sdd] supports TCG Opal [79474.976092] sd 5:0:0:0: [sdd] Attached SCSI disk [79555.436601] virbr0: port 1(vnet2) entered blocking state [79555.436606] virbr0: port 1(vnet2) entered disabled state [79555.436657] device vnet2 entered promiscuous mode [79555.436870] virbr0: port 1(vnet2) entered blocking state [79555.436875] virbr0: port 1(vnet2) entered listening state [79557.450934] virbr0: port 1(vnet2) entered learning state [79559.470924] virbr0: port 1(vnet2) entered forwarding state [79559.470931] virbr0: topology change detected, propagating [79638.693997] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.694014] ata6.00: irq_stat 0x40000001 [79638.694024] ata6.00: failed command: WRITE DMA [79638.694028] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 23 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.694046] ata6.00: status: { DRDY ERR } [79638.694052] ata6.00: error: { ABRT } [79638.694271] ata6.00: supports DRM functions and may not be fully accessible [79638.697052] ata6.00: supports DRM functions and may not be fully accessible [79638.699476] ata6.00: configured for UDMA/133 (device error ignored) [79638.699493] ata6: EH complete [79638.730002] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.730016] ata6.00: irq_stat 0x40000001 [79638.730023] ata6.00: failed command: WRITE DMA [79638.730028] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 3 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.730045] ata6.00: status: { DRDY ERR } [79638.730051] ata6.00: error: { ABRT } [79638.730248] ata6.00: supports DRM functions and may not be fully accessible [79638.732916] ata6.00: supports DRM functions and may not be fully accessible [79638.735363] ata6.00: configured for UDMA/133 (device error ignored) [79638.735382] ata6: EH complete [79638.770000] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.770014] ata6.00: irq_stat 0x40000001 [79638.770023] ata6.00: failed command: WRITE DMA [79638.770028] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 12 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.770045] ata6.00: status: { DRDY ERR } [79638.770051] ata6.00: error: { ABRT } [79638.770251] ata6.00: supports DRM functions and may not be fully accessible [79638.772942] ata6.00: supports DRM functions and may not be fully accessible [79638.775464] ata6.00: configured for UDMA/133 (device error ignored) [79638.775503] ata6: EH complete [79638.846064] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.846080] ata6.00: irq_stat 0x40000001 [79638.846089] ata6.00: failed command: WRITE DMA [79638.846094] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 14 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.846111] ata6.00: status: { DRDY ERR } [79638.846117] ata6.00: error: { ABRT } [79638.846322] ata6.00: supports DRM functions and may not be fully accessible [79638.848972] ata6.00: supports DRM functions and may not be fully accessible [79638.851414] ata6.00: configured for UDMA/133 (device error ignored) [79638.851436] ata6: EH complete [79638.885987] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.885992] ata6.00: irq_stat 0x40000001 [79638.885995] ata6.00: failed command: WRITE DMA [79638.885997] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 16 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.886003] ata6.00: status: { DRDY ERR } [79638.886005] ata6.00: error: { ABRT } [79638.886195] ata6.00: supports DRM functions and may not be fully accessible [79638.888931] ata6.00: supports DRM functions and may not be fully accessible [79638.891368] ata6.00: configured for UDMA/133 (device error ignored) [79638.891383] ata6: EH complete [79638.937997] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79638.938011] ata6.00: irq_stat 0x40000001 [79638.938020] ata6.00: failed command: WRITE DMA [79638.938025] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 18 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79638.938043] ata6.00: status: { DRDY ERR } [79638.938055] ata6.00: error: { ABRT } [79638.938267] ata6.00: supports DRM functions and may not be fully accessible [79638.940887] ata6.00: supports DRM functions and may not be fully accessible [79638.943381] ata6.00: configured for UDMA/133 (device error ignored) [79638.943405] sd 5:0:0:0: [sdd] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79638.943408] sd 5:0:0:0: [sdd] tag#18 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#18 Add. Sense: Unaligned write command [79638.943413] sd 5:0:0:0: [sdd] tag#18 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79638.943414] blk_print_req_error: 18 callbacks suppressed [79638.943415] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79638.943433] ata6: EH complete [79639.014049] ata6: limiting SATA link speed to 3.0 Gbps [79639.014055] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79639.014059] ata6.00: irq_stat 0x40000001 [79639.014062] ata6.00: failed command: WRITE DMA EXT [79639.014064] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 11 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.014070] ata6.00: status: { DRDY ERR } [79639.014072] ata6.00: error: { ABRT } [79639.014076] ata6: hard resetting link [79639.493980] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [79639.494186] ata6.00: supports DRM functions and may not be fully accessible [79639.496991] ata6.00: supports DRM functions and may not be fully accessible [79639.499523] ata6.00: configured for UDMA/133 (device error ignored) [79639.499544] ata6: EH complete [79639.557981] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.557987] ata6.00: irq_stat 0x40000001 [79639.557990] ata6.00: failed command: WRITE DMA EXT [79639.557992] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 13 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.557998] ata6.00: status: { DRDY ERR } [79639.558000] ata6.00: error: { ABRT } [79639.558194] ata6.00: supports DRM functions and may not be fully accessible [79639.560936] ata6.00: supports DRM functions and may not be fully accessible [79639.563516] ata6.00: configured for UDMA/133 (device error ignored) [79639.563535] ata6: EH complete [79639.601959] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.601965] ata6.00: irq_stat 0x40000001 [79639.601968] ata6.00: failed command: WRITE DMA EXT [79639.601970] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 6 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.601976] ata6.00: status: { DRDY ERR } [79639.601978] ata6.00: error: { ABRT } [79639.602170] ata6.00: supports DRM functions and may not be fully accessible [79639.604971] ata6.00: supports DRM functions and may not be fully accessible [79639.607532] ata6.00: configured for UDMA/133 (device error ignored) [79639.607550] ata6: EH complete [79639.649985] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.650002] ata6.00: irq_stat 0x40000001 [79639.650019] ata6.00: failed command: WRITE DMA EXT [79639.650021] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 14 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.650032] ata6.00: status: { DRDY ERR } [79639.650034] ata6.00: error: { ABRT } [79639.650226] ata6.00: supports DRM functions and may not be fully accessible [79639.652956] ata6.00: supports DRM functions and may not be fully accessible [79639.655420] ata6.00: configured for UDMA/133 (device error ignored) [79639.655451] ata6: EH complete [79639.697910] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.697915] ata6.00: irq_stat 0x40000001 [79639.697918] ata6.00: failed command: WRITE DMA EXT [79639.697920] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 15 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.697926] ata6.00: status: { DRDY ERR } [79639.697928] ata6.00: error: { ABRT } [79639.698118] ata6.00: supports DRM functions and may not be fully accessible [79639.700789] ata6.00: supports DRM functions and may not be fully accessible [79639.703387] ata6.00: configured for UDMA/133 (device error ignored) [79639.703405] ata6: EH complete [79639.754041] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.754055] ata6.00: irq_stat 0x40000001 [79639.754063] ata6.00: failed command: WRITE DMA EXT [79639.754068] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 14 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79639.754085] ata6.00: status: { DRDY ERR } [79639.754091] ata6.00: error: { ABRT } [79639.754297] ata6.00: supports DRM functions and may not be fully accessible [79639.757033] ata6.00: supports DRM functions and may not be fully accessible [79639.759533] ata6.00: configured for UDMA/133 (device error ignored) [79639.759565] sd 5:0:0:0: [sdd] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79639.759569] sd 5:0:0:0: [sdd] tag#14 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#14 Add. Sense: Unaligned write command [79639.759574] sd 5:0:0:0: [sdd] tag#14 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79639.759575] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79639.759592] ata6: EH complete [79639.759925] ata6.00: Enabling discard_zeroes_data [79639.834042] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79639.834057] ata6.00: irq_stat 0x40000001 [79639.834065] ata6.00: failed command: WRITE DMA [79639.834070] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 4 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79639.834087] ata6.00: status: { DRDY ERR } [79639.834093] ata6.00: error: { ABRT } [79639.834303] ata6.00: supports DRM functions and may not be fully accessible [79639.837098] ata6.00: supports DRM functions and may not be fully accessible [79639.839711] ata6.00: configured for UDMA/133 (device error ignored) [79639.839731] ata6: EH complete [79639.877914] ata6: limiting SATA link speed to 1.5 Gbps [79639.877918] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79639.877922] ata6.00: irq_stat 0x40000001 [79639.877925] ata6.00: failed command: WRITE DMA [79639.877928] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 23 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79639.877942] ata6.00: status: { DRDY ERR } [79639.877944] ata6.00: error: { ABRT } [79639.877947] ata6: hard resetting link [79640.361979] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79640.362200] ata6.00: supports DRM functions and may not be fully accessible [79640.364772] ata6.00: supports DRM functions and may not be fully accessible [79640.367443] ata6.00: configured for UDMA/133 (device error ignored) [79640.367496] ata6: EH complete [79640.405987] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.406001] ata6.00: irq_stat 0x40000001 [79640.406009] ata6.00: failed command: WRITE DMA [79640.406014] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 8 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79640.406034] ata6.00: status: { DRDY ERR } [79640.406043] ata6.00: error: { ABRT } [79640.406255] ata6.00: supports DRM functions and may not be fully accessible [79640.409129] ata6.00: supports DRM functions and may not be fully accessible [79640.411664] ata6.00: configured for UDMA/133 (device error ignored) [79640.411680] ata6: EH complete [79640.449985] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.449990] ata6.00: irq_stat 0x40000001 [79640.449992] ata6.00: failed command: WRITE DMA [79640.449994] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 10 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79640.450000] ata6.00: status: { DRDY ERR } [79640.450002] ata6.00: error: { ABRT } [79640.450199] ata6.00: supports DRM functions and may not be fully accessible [79640.453084] ata6.00: supports DRM functions and may not be fully accessible [79640.455752] ata6.00: configured for UDMA/133 (device error ignored) [79640.455769] ata6: EH complete [79640.494027] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.494041] ata6.00: irq_stat 0x40000001 [79640.494049] ata6.00: failed command: WRITE DMA [79640.494053] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 12 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79640.494071] ata6.00: status: { DRDY ERR } [79640.494076] ata6.00: error: { ABRT } [79640.494285] ata6.00: supports DRM functions and may not be fully accessible [79640.497141] ata6.00: supports DRM functions and may not be fully accessible [79640.499679] ata6.00: configured for UDMA/133 (device error ignored) [79640.499696] ata6: EH complete [79640.533983] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.533999] ata6.00: irq_stat 0x40000001 [79640.534013] ata6.00: failed command: WRITE DMA [79640.534015] ata6.00: cmd ca/00:28:00:00:00/00:00:00:00:00/e0 tag 14 dma 20480 out res 51/04:28:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79640.534021] ata6.00: status: { DRDY ERR } [79640.534023] ata6.00: error: { ABRT } [79640.534239] ata6.00: supports DRM functions and may not be fully accessible [79640.537013] ata6.00: supports DRM functions and may not be fully accessible [79640.539564] ata6.00: configured for UDMA/133 (device error ignored) [79640.539584] sd 5:0:0:0: [sdd] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79640.539588] sd 5:0:0:0: [sdd] tag#14 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#14 Add. Sense: Unaligned write command [79640.539592] sd 5:0:0:0: [sdd] tag#14 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79640.539594] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79640.539628] ata6: EH complete [79640.601949] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.601955] ata6.00: irq_stat 0x40000001 [79640.601958] ata6.00: failed command: WRITE DMA EXT [79640.601960] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 16 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79640.601966] ata6.00: status: { DRDY ERR } [79640.601968] ata6.00: error: { ABRT } [79640.602169] ata6.00: supports DRM functions and may not be fully accessible [79640.604986] ata6.00: supports DRM functions and may not be fully accessible [79640.607592] ata6.00: configured for UDMA/133 (device error ignored) [79640.607611] ata6: EH complete [79640.658019] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79640.658024] ata6.00: irq_stat 0x40000001 [79640.658027] ata6.00: failed command: WRITE DMA EXT [79640.658029] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 18 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79640.658035] ata6.00: status: { DRDY ERR } [79640.658037] ata6.00: error: { ABRT } [79640.658235] ata6.00: supports DRM functions and may not be fully accessible [79640.661016] ata6.00: supports DRM functions and may not be fully accessible [79640.663662] ata6.00: configured for UDMA/133 (device error ignored) [79640.663705] ata6: EH complete [79640.705968] ata6.00: limiting speed to UDMA/100:PIO4 [79640.705972] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79640.705975] ata6.00: irq_stat 0x40000001 [79640.705978] ata6.00: failed command: WRITE DMA EXT [79640.705979] ata6.00: cmd 35/00:28:88:6d:70/00:00:74:00:00/e0 tag 20 dma 20480 out res 51/04:28:88:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [79640.705986] ata6.00: status: { DRDY ERR } [79640.705988] ata6.00: error: { ABRT } [79640.705991] ata6: hard resetting link [79641.185961] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79641.186170] ata6.00: supports DRM functions and may not be fully accessible [79641.188923] ata6.00: supports DRM functions and may not be fully accessible [79641.191379] ata6.00: failed to set xfermode (err_mask=0x1) [79646.409884] ata6: hard resetting link [79646.889897] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79646.890118] ata6.00: supports DRM functions and may not be fully accessible [79646.892661] ata6.00: supports DRM functions and may not be fully accessible [79646.895236] ata6.00: failed to set xfermode (err_mask=0x1) [79646.895243] ata6.00: limiting speed to UDMA/100:PIO3 [79652.045839] ata6: hard resetting link [79652.521810] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79652.522023] ata6.00: supports DRM functions and may not be fully accessible [79652.524562] ata6.00: supports DRM functions and may not be fully accessible [79652.527266] ata6.00: failed to set xfermode (err_mask=0x1) [79652.527273] ata6.00: disable device [79652.527300] ata6: EH complete [79652.527340] sd 5:0:0:0: [sdd] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=11s [79652.527344] sd 5:0:0:0: [sdd] tag#22 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79652.527346] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79652.527409] sd 5:0:0:0: [sdd] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527416] sd 5:0:0:0: [sdd] tag#24 CDB: Write(10) 2a 00 74 70 6d 88 00 00 28 00 [79652.527418] I/O error, dev sdd, sector 1953525128 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79652.527459] sd 5:0:0:0: [sdd] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527463] sd 5:0:0:0: [sdd] tag#26 CDB: Read(10) 28 00 00 03 28 40 00 00 08 00 [79652.527464] I/O error, dev sdd, sector 206912 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79652.527495] sd 5:0:0:0: [sdd] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527498] sd 5:0:0:0: [sdd] tag#28 CDB: Read(10) 28 00 00 03 28 40 00 00 08 00 [79652.527500] I/O error, dev sdd, sector 206912 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79652.527524] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79652.527527] sd 5:0:0:0: [sdd] Sense not available. [79652.527538] sd 5:0:0:0: [sdd] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527541] sd 5:0:0:0: [sdd] tag#30 CDB: Read(10) 28 00 00 03 a8 00 00 00 08 00 [79652.527542] I/O error, dev sdd, sector 239616 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2 [79652.527578] sd 5:0:0:0: [sdd] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527580] sd 5:0:0:0: [sdd] tag#1 CDB: Read(10) 28 00 74 60 98 00 00 00 08 00 [79652.527582] I/O error, dev sdd, sector 1952487424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79652.527615] sd 5:0:0:0: [sdd] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527618] sd 5:0:0:0: [sdd] tag#3 CDB: Read(10) 28 00 00 00 08 20 00 00 08 00 [79652.527619] I/O error, dev sdd, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79652.527643] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79652.527647] sd 5:0:0:0: [sdd] Sense not available. [79652.527653] sd 5:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B) [79652.527661] sd 5:0:0:0: [sdd] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [79652.527664] sd 5:0:0:0: [sdd] tag#5 CDB: Write(10) 2a 00 00 00 00 00 00 00 28 00 [79652.527665] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x8800 phys_seg 5 prio class 2 [79652.527729] sdd: detected capacity change from 1953525168 to 0 [79685.610235] virbr0: port 1(vnet2) entered disabled state [79685.611105] device vnet2 left promiscuous mode [79685.611110] virbr0: port 1(vnet2) entered disabled state [79686.200442] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79686.200446] sd 5:0:0:0: [sdd] Sense not available. [79686.200467] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79686.200469] sd 5:0:0:0: [sdd] Sense not available. [79693.313335] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79693.313690] ata1.00: configured for UDMA/133 [79693.801261] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79693.822943] ata2.00: configured for UDMA/133 [79694.365255] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79694.367488] ata3.00: configured for UDMA/133 [79694.853323] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79694.875628] ata4.00: configured for UDMA/133 [79695.373268] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79695.373518] ata6.00: failed to read native max address (err_mask=0x1) [79695.373520] ata6.00: HPA support seems broken, skipping HPA handling [79695.373522] ata6.00: supports DRM functions and may not be fully accessible [79695.373523] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [79695.373525] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [79695.375807] ata6.00: Features: Trust Dev-Sleep [79695.376037] ata6.00: supports DRM functions and may not be fully accessible [79695.378586] ata6.00: configured for UDMA/133 (device error ignored) [79695.378609] ata6.00: detaching (SCSI 5:0:0:0) [79695.445551] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [79695.445914] sd 5:0:0:0: Attached scsi generic sg4 type 0 [79695.445929] ata6.00: Enabling discard_zeroes_data [79695.445967] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [79695.445990] sd 5:0:0:0: [sdd] Write Protect is off [79695.445996] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [79695.446029] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [79695.446095] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [79695.446397] ata6.00: Enabling discard_zeroes_data [79695.447946] sdd: sdd1 sdd2 sdd3 sdd4 [79695.449393] sd 5:0:0:0: [sdd] supports TCG Opal [79695.449398] sd 5:0:0:0: [sdd] Attached SCSI disk [79719.814165] ata6.00: Enabling discard_zeroes_data [79719.816021] sdd: sdd1 sdd2 sdd3 sdd4 [79742.404698] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.404707] ata6.00: irq_stat 0x40000001 [79742.404716] ata6.00: failed command: READ DMA [79742.404718] ata6.00: cmd c8/00:08:98:5a:04/00:00:00:00:00/e0 tag 14 dma 4096 in res 51/40:00:98:5a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [79742.404725] ata6.00: status: { DRDY ERR } [79742.404727] ata6.00: error: { UNC } [79742.404933] ata6.00: supports DRM functions and may not be fully accessible [79742.407634] ata6.00: supports DRM functions and may not be fully accessible [79742.410141] ata6.00: configured for UDMA/133 (device error ignored) [79742.410159] sd 5:0:0:0: [sdd] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79742.410163] sd 5:0:0:0: [sdd] tag#14 Sense Key : Medium Error [current] sd 5:0:0:0: [sdd] tag#14 Add. Sense: Unrecovered read error - auto reallocate failed [79742.410168] sd 5:0:0:0: [sdd] tag#14 CDB: Read(10) 28 00 00 04 5a 98 00 00 08 00 [79742.410170] I/O error, dev sdd, sector 285336 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [79742.410181] ata6: EH complete [79742.410342] ata6.00: Enabling discard_zeroes_data [79742.410796] ata6.00: Enabling discard_zeroes_data [79742.480684] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.480691] ata6.00: irq_stat 0x40000001 [79742.480695] ata6.00: failed command: WRITE DMA [79742.480698] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 15 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.480706] ata6.00: status: { DRDY ERR } [79742.480709] ata6.00: error: { ABRT } [79742.480904] ata6.00: supports DRM functions and may not be fully accessible [79742.483536] ata6.00: supports DRM functions and may not be fully accessible [79742.485981] ata6.00: configured for UDMA/133 (device error ignored) [79742.486005] ata6: EH complete [79742.544695] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.544707] ata6.00: irq_stat 0x40000001 [79742.544711] ata6.00: failed command: WRITE DMA [79742.544713] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 11 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.544721] ata6.00: status: { DRDY ERR } [79742.544723] ata6.00: error: { ABRT } [79742.544924] ata6.00: supports DRM functions and may not be fully accessible [79742.547609] ata6.00: supports DRM functions and may not be fully accessible [79742.550077] ata6.00: configured for UDMA/133 (device error ignored) [79742.550101] ata6: EH complete [79742.600684] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.600692] ata6.00: irq_stat 0x40000001 [79742.600695] ata6.00: failed command: WRITE DMA [79742.600697] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 7 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.600703] ata6.00: status: { DRDY ERR } [79742.600705] ata6.00: error: { ABRT } [79742.600902] ata6.00: supports DRM functions and may not be fully accessible [79742.603533] ata6.00: supports DRM functions and may not be fully accessible [79742.605976] ata6.00: configured for UDMA/133 (device error ignored) [79742.605995] ata6: EH complete [79742.648743] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.648751] ata6.00: irq_stat 0x40000001 [79742.648754] ata6.00: failed command: WRITE DMA [79742.648756] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 13 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.648766] ata6.00: status: { DRDY ERR } [79742.648768] ata6.00: error: { ABRT } [79742.648963] ata6.00: supports DRM functions and may not be fully accessible [79742.651587] ata6.00: supports DRM functions and may not be fully accessible [79742.654055] ata6.00: configured for UDMA/133 (device error ignored) [79742.654073] ata6: EH complete [79742.696704] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.696712] ata6.00: irq_stat 0x40000001 [79742.696715] ata6.00: failed command: WRITE DMA [79742.696717] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 4 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.696723] ata6.00: status: { DRDY ERR } [79742.696724] ata6.00: error: { ABRT } [79742.696920] ata6.00: supports DRM functions and may not be fully accessible [79742.699569] ata6.00: supports DRM functions and may not be fully accessible [79742.701982] ata6.00: configured for UDMA/133 (device error ignored) [79742.702003] ata6: EH complete [79742.744752] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79742.744759] ata6.00: irq_stat 0x40000001 [79742.744762] ata6.00: failed command: WRITE DMA [79742.744763] ata6.00: cmd ca/00:80:00:00:00/00:00:00:00:00/e0 tag 6 dma 65536 out res 51/04:80:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.744769] ata6.00: status: { DRDY ERR } [79742.744771] ata6.00: error: { ABRT } [79742.744963] ata6.00: supports DRM functions and may not be fully accessible [79742.747581] ata6.00: supports DRM functions and may not be fully accessible [79742.750000] ata6.00: configured for UDMA/133 (device error ignored) [79742.750020] sd 5:0:0:0: [sdd] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79742.750024] sd 5:0:0:0: [sdd] tag#6 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#6 Add. Sense: Unaligned write command [79742.750029] sd 5:0:0:0: [sdd] tag#6 CDB: Write(10) 2a 00 00 00 00 00 00 00 80 00 [79742.750030] I/O error, dev sdd, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 16 prio class 2 [79742.750035] buffer_io_error: 11 callbacks suppressed [79742.750036] Buffer I/O error on dev sdd, logical block 0, lost async page write [79742.750045] Buffer I/O error on dev sdd, logical block 1, lost async page write [79742.750048] Buffer I/O error on dev sdd, logical block 2, lost async page write [79742.750051] Buffer I/O error on dev sdd, logical block 3, lost async page write [79742.750053] Buffer I/O error on dev sdd, logical block 4, lost async page write [79742.750055] Buffer I/O error on dev sdd, logical block 5, lost async page write [79742.750057] Buffer I/O error on dev sdd, logical block 6, lost async page write [79742.750059] Buffer I/O error on dev sdd, logical block 7, lost async page write [79742.750061] Buffer I/O error on dev sdd, logical block 8, lost async page write [79742.750063] Buffer I/O error on dev sdd, logical block 9, lost async page write [79742.750076] ata6: EH complete [79742.804751] ata6: limiting SATA link speed to 3.0 Gbps [79742.804756] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79742.804760] ata6.00: irq_stat 0x40000001 [79742.804763] ata6.00: failed command: WRITE DMA [79742.804765] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 14 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79742.804771] ata6.00: status: { DRDY ERR } [79742.804773] ata6.00: error: { ABRT } [79742.804776] ata6: hard resetting link [79743.288676] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [79743.288887] ata6.00: supports DRM functions and may not be fully accessible [79743.291390] ata6.00: supports DRM functions and may not be fully accessible [79743.293883] ata6.00: configured for UDMA/133 (device error ignored) [79743.293904] ata6: EH complete [79743.332725] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.332733] ata6.00: irq_stat 0x40000001 [79743.332737] ata6.00: failed command: WRITE DMA [79743.332739] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 21 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79743.332745] ata6.00: status: { DRDY ERR } [79743.332747] ata6.00: error: { ABRT } [79743.332943] ata6.00: supports DRM functions and may not be fully accessible [79743.335619] ata6.00: supports DRM functions and may not be fully accessible [79743.338101] ata6.00: configured for UDMA/133 (device error ignored) [79743.338123] ata6: EH complete [79743.392745] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.392753] ata6.00: irq_stat 0x40000001 [79743.392756] ata6.00: failed command: WRITE DMA [79743.392758] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 23 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79743.392765] ata6.00: status: { DRDY ERR } [79743.392766] ata6.00: error: { ABRT } [79743.392964] ata6.00: supports DRM functions and may not be fully accessible [79743.395812] ata6.00: supports DRM functions and may not be fully accessible [79743.398289] ata6.00: configured for UDMA/133 (device error ignored) [79743.398311] ata6: EH complete [79743.468729] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.468736] ata6.00: irq_stat 0x40000001 [79743.468739] ata6.00: failed command: WRITE DMA [79743.468741] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 23 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79743.468747] ata6.00: status: { DRDY ERR } [79743.468749] ata6.00: error: { ABRT } [79743.468942] ata6.00: supports DRM functions and may not be fully accessible [79743.471595] ata6.00: supports DRM functions and may not be fully accessible [79743.474061] ata6.00: configured for UDMA/133 (device error ignored) [79743.474082] ata6: EH complete [79743.520725] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.520733] ata6.00: irq_stat 0x40000001 [79743.520736] ata6.00: failed command: WRITE DMA [79743.520738] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 25 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79743.520749] ata6.00: status: { DRDY ERR } [79743.520751] ata6.00: error: { ABRT } [79743.520948] ata6.00: supports DRM functions and may not be fully accessible [79743.523744] ata6.00: supports DRM functions and may not be fully accessible [79743.526220] ata6.00: configured for UDMA/133 (device error ignored) [79743.526238] ata6: EH complete [79743.592725] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.592732] ata6.00: irq_stat 0x40000001 [79743.592736] ata6.00: failed command: WRITE DMA [79743.592738] ata6.00: cmd ca/00:38:80:00:00/00:00:00:00:00/e0 tag 27 dma 28672 out res 51/04:38:80:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [79743.592744] ata6.00: status: { DRDY ERR } [79743.592746] ata6.00: error: { ABRT } [79743.592947] ata6.00: supports DRM functions and may not be fully accessible [79743.595740] ata6.00: supports DRM functions and may not be fully accessible [79743.598190] ata6.00: configured for UDMA/133 (device error ignored) [79743.598209] sd 5:0:0:0: [sdd] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79743.598212] sd 5:0:0:0: [sdd] tag#27 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#27 Add. Sense: Unaligned write command [79743.598218] sd 5:0:0:0: [sdd] tag#27 CDB: Write(10) 2a 00 00 00 00 80 00 00 38 00 [79743.598219] I/O error, dev sdd, sector 128 op 0x1:(WRITE) flags 0x800 phys_seg 7 prio class 2 [79743.598256] ata6: EH complete [79743.598315] ata6.00: Enabling discard_zeroes_data [79743.668693] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79743.668700] ata6.00: irq_stat 0x40000001 [79743.668703] ata6.00: failed command: WRITE DMA EXT [79743.668705] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 12 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79743.668712] ata6.00: status: { DRDY ERR } [79743.668714] ata6.00: error: { ABRT } [79743.668907] ata6.00: supports DRM functions and may not be fully accessible [79743.671558] ata6.00: supports DRM functions and may not be fully accessible [79743.673999] ata6.00: configured for UDMA/133 (device error ignored) [79743.674024] ata6: EH complete [79743.724744] ata6: limiting SATA link speed to 1.5 Gbps [79743.724749] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79743.724753] ata6.00: irq_stat 0x40000001 [79743.724755] ata6.00: failed command: WRITE DMA EXT [79743.724757] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 0 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79743.724763] ata6.00: status: { DRDY ERR } [79743.724770] ata6.00: error: { ABRT } [79743.724775] ata6: hard resetting link [79744.200662] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79744.200878] ata6.00: supports DRM functions and may not be fully accessible [79744.203694] ata6.00: supports DRM functions and may not be fully accessible [79744.206313] ata6.00: configured for UDMA/133 (device error ignored) [79744.206339] ata6: EH complete [79744.256723] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.256731] ata6.00: irq_stat 0x40000001 [79744.256734] ata6.00: failed command: WRITE DMA EXT [79744.256736] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 22 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79744.256742] ata6.00: status: { DRDY ERR } [79744.256744] ata6.00: error: { ABRT } [79744.256952] ata6.00: supports DRM functions and may not be fully accessible [79744.259850] ata6.00: supports DRM functions and may not be fully accessible [79744.262400] ata6.00: configured for UDMA/133 (device error ignored) [79744.262425] ata6: EH complete [79744.320718] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.320725] ata6.00: irq_stat 0x40000001 [79744.320729] ata6.00: failed command: WRITE DMA EXT [79744.320731] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 24 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79744.320737] ata6.00: status: { DRDY ERR } [79744.320739] ata6.00: error: { ABRT } [79744.320942] ata6.00: supports DRM functions and may not be fully accessible [79744.323970] ata6.00: supports DRM functions and may not be fully accessible [79744.326673] ata6.00: configured for UDMA/133 (device error ignored) [79744.326695] ata6: EH complete [79744.388733] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.388741] ata6.00: irq_stat 0x40000001 [79744.388744] ata6.00: failed command: WRITE DMA EXT [79744.388746] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 26 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79744.388753] ata6.00: status: { DRDY ERR } [79744.388755] ata6.00: error: { ABRT } [79744.388957] ata6.00: supports DRM functions and may not be fully accessible [79744.391865] ata6.00: supports DRM functions and may not be fully accessible [79744.394491] ata6.00: configured for UDMA/133 (device error ignored) [79744.394512] ata6: EH complete [79744.456672] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.456679] ata6.00: irq_stat 0x40000001 [79744.456683] ata6.00: failed command: WRITE DMA EXT [79744.456685] ata6.00: cmd 35/00:98:b8:00:00/00:02:00:00:00/e0 tag 28 dma 339968 out res 51/04:98:b8:00:00/00:02:00:00:00/e0 Emask 0x1 (device error) [79744.456691] ata6.00: status: { DRDY ERR } [79744.456693] ata6.00: error: { ABRT } [79744.456897] ata6.00: supports DRM functions and may not be fully accessible [79744.459622] ata6.00: supports DRM functions and may not be fully accessible [79744.462104] ata6.00: configured for UDMA/133 (device error ignored) [79744.462134] sd 5:0:0:0: [sdd] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [79744.462138] sd 5:0:0:0: [sdd] tag#28 Sense Key : Illegal Request [current] sd 5:0:0:0: [sdd] tag#28 Add. Sense: Unaligned write command [79744.462143] sd 5:0:0:0: [sdd] tag#28 CDB: Write(10) 2a 00 00 00 00 b8 00 02 98 00 [79744.462144] I/O error, dev sdd, sector 184 op 0x1:(WRITE) flags 0x800 phys_seg 83 prio class 2 [79744.462208] ata6: EH complete [79744.540666] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.540673] ata6.00: irq_stat 0x40000001 [79744.540677] ata6.00: failed command: WRITE DMA EXT [79744.540688] ata6.00: cmd 35/00:40:50:03:00/00:05:00:00:00/e0 tag 30 dma 688128 out res 51/04:40:50:03:00/00:05:00:00:00/e0 Emask 0x1 (device error) [79744.540694] ata6.00: status: { DRDY ERR } [79744.540696] ata6.00: error: { ABRT } [79744.540907] ata6.00: supports DRM functions and may not be fully accessible [79744.543639] ata6.00: supports DRM functions and may not be fully accessible [79744.546125] ata6.00: configured for UDMA/133 (device error ignored) [79744.546149] ata6: EH complete [79744.616654] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [79744.616662] ata6.00: irq_stat 0x40000001 [79744.616664] ata6.00: failed command: WRITE DMA EXT [79744.616666] ata6.00: cmd 35/00:40:50:03:00/00:05:00:00:00/e0 tag 1 dma 688128 out res 51/04:40:50:03:00/00:05:00:00:00/e0 Emask 0x1 (device error) [79744.616672] ata6.00: status: { DRDY ERR } [79744.616675] ata6.00: error: { ABRT } [79744.616876] ata6.00: supports DRM functions and may not be fully accessible [79744.619581] ata6.00: supports DRM functions and may not be fully accessible [79744.622057] ata6.00: configured for UDMA/133 (device error ignored) [79744.622081] ata6: EH complete [79744.668670] ata6.00: limiting speed to UDMA/100:PIO4 [79744.668679] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [79744.668683] ata6.00: irq_stat 0x40000001 [79744.668686] ata6.00: failed command: WRITE DMA EXT [79744.668688] ata6.00: cmd 35/00:40:50:03:00/00:05:00:00:00/e0 tag 3 dma 688128 out res 51/04:40:50:03:00/00:05:00:00:00/e0 Emask 0x1 (device error) [79744.668694] ata6.00: status: { DRDY ERR } [79744.668696] ata6.00: error: { ABRT } [79744.668700] ata6: hard resetting link [79745.144723] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79745.144928] ata6.00: supports DRM functions and may not be fully accessible [79745.147454] ata6.00: supports DRM functions and may not be fully accessible [79745.149929] ata6.00: failed to set xfermode (err_mask=0x1) [79750.344668] ata6: hard resetting link [79750.828653] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79750.828876] ata6.00: supports DRM functions and may not be fully accessible [79750.831414] ata6.00: supports DRM functions and may not be fully accessible [79750.833872] ata6.00: failed to set xfermode (err_mask=0x1) [79750.833879] ata6.00: limiting speed to UDMA/100:PIO3 [79755.976584] ata6: hard resetting link [79756.452531] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79756.452741] ata6.00: supports DRM functions and may not be fully accessible [79756.455287] ata6.00: supports DRM functions and may not be fully accessible [79756.457974] ata6.00: failed to set xfermode (err_mask=0x1) [79756.457980] ata6.00: disable device [79756.458007] ata6: EH complete [79756.458057] sd 5:0:0:0: [sdd] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=11s [79756.458062] sd 5:0:0:0: [sdd] tag#5 CDB: Write(10) 2a 00 00 00 03 50 00 05 40 00 [79756.458064] I/O error, dev sdd, sector 848 op 0x1:(WRITE) flags 0x4800 phys_seg 168 prio class 2 [79756.458069] buffer_io_error: 96 callbacks suppressed [79756.458070] Buffer I/O error on dev sdd, logical block 106, lost async page write [79756.458080] Buffer I/O error on dev sdd, logical block 107, lost async page write [79756.458084] Buffer I/O error on dev sdd, logical block 108, lost async page write [79756.458088] Buffer I/O error on dev sdd, logical block 109, lost async page write [79756.458091] Buffer I/O error on dev sdd, logical block 110, lost async page write [79756.458092] sd 5:0:0:0: [sdd] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79756.458094] Buffer I/O error on dev sdd, logical block 111, lost async page write [79756.458095] sd 5:0:0:0: [sdd] Sense not available. [79756.458098] Buffer I/O error on dev sdd, logical block 112, lost async page write [79756.458102] Buffer I/O error on dev sdd, logical block 113, lost async page write [79756.458105] Buffer I/O error on dev sdd, logical block 114, lost async page write [79756.458109] Buffer I/O error on dev sdd, logical block 115, lost async page write [79756.458124] sd 5:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [79756.458126] sd 5:0:0:0: [sdd] Sense not available. [79756.458132] sd 5:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B) [79756.458184] sdd: detected capacity change from 1953525168 to 0 [79756.458334] sd 5:0:0:0: [sdd] tag#13 access beyond end of device [79756.458340] I/O error, dev sdd, sector 2192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2 [79756.458445] sd 5:0:0:0: [sdd] tag#4 access beyond end of device [79756.458453] I/O error, dev sdd, sector 2200 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 2 [79769.060425] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79769.060816] ata1.00: configured for UDMA/133 [79769.552428] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79769.574162] ata2.00: configured for UDMA/133 [79770.120433] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79770.122663] ata3.00: configured for UDMA/133 [79770.608353] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79770.630537] ata4.00: configured for UDMA/133 [79771.124344] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79771.124584] ata6.00: failed to read native max address (err_mask=0x1) [79771.124586] ata6.00: HPA support seems broken, skipping HPA handling [79771.124588] ata6.00: supports DRM functions and may not be fully accessible [79771.124589] ata6.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133 [79771.124592] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (not used) [79771.126845] ata6.00: Features: Trust Dev-Sleep [79771.127069] ata6.00: supports DRM functions and may not be fully accessible [79771.129502] ata6.00: configured for UDMA/133 (device error ignored) [79771.129528] ata6.00: detaching (SCSI 5:0:0:0) [79771.192644] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 [79771.193010] sd 5:0:0:0: Attached scsi generic sg4 type 0 [79771.193113] ata6.00: Enabling discard_zeroes_data [79771.193144] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [79771.193181] sd 5:0:0:0: [sdd] Write Protect is off [79771.193184] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [79771.193229] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [79771.193285] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [79771.193626] ata6.00: Enabling discard_zeroes_data [79771.195261] sdd: sdd1 sdd2 sdd3 sdd4 [79771.196477] sd 5:0:0:0: [sdd] supports TCG Opal [79771.196480] sd 5:0:0:0: [sdd] Attached SCSI disk [81878.762670] wlp5s0: deauthenticating from 94C1A303F07F89691F66500A4E53515B by local choice (Reason: 3=DEAUTH_LEAVING) [81880.590613] EXT4-fs (sdb1): unmounting filesystem.