[ 0.859696] device-mapper: uevent: version 1.0.3 [ 0.859741] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.869840] xor: automatically using best checksumming function avx [ 0.887681] raid6: avx2x4 gen() 37549 MB/s [ 0.904681] raid6: avx2x2 gen() 42054 MB/s [ 0.921680] raid6: avx2x1 gen() 33087 MB/s [ 0.921681] raid6: using algorithm avx2x2 gen() 42054 MB/s [ 0.938679] raid6: .... xor() 39656 MB/s, rmw enabled [ 0.938680] raid6: using avx2x2 recovery algorithm [ 0.980123] Btrfs loaded, zoned=yes, fsverity=yes [ 0.991058] ACPI: bus type USB registered [ 0.991081] usbcore: registered new interface driver usbfs [ 0.991088] usbcore: registered new interface driver hub [ 0.991097] usbcore: registered new device driver usb [ 1.154373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.156034] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.160362] ACPI: button: Power Button [PWRF] ccp 0000:0e:00.1: ccp: unable to access the device: you might be running a broken BIOS. [ 1.172433] ccp 0000:0e:00.1: psp enabled [ 1.175881] cryptd: max_cpu_qlen set to 1000 [ 1.180502] SCSI subsystem initialized [ 1.182337] xhci_hcd 0000:07:00.1: xHCI Host Controller [ 1.182345] xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 1 [ 1.182510] xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010 [ 1.182974] xhci_hcd 0000:07:00.1: xHCI Host Controller [ 1.182978] xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 2 [ 1.182981] xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed [ 1.183044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.183047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.183049] usb usb1: Product: xHCI Host Controller [ 1.183051] usb usb1: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.183053] usb usb1: SerialNumber: ... [ 1.184403] AVX2 version of gcm_enc/dec engaged. [ 1.184438] AES CTR mode by8 optimization enabled [ 1.185184] hub 1-0:1.0: USB hub found [ 1.185205] hub 1-0:1.0: 6 ports detected [ 1.186338] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.186366] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 1.186369] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.186371] usb usb2: Product: xHCI Host Controller [ 1.186373] usb usb2: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.186375] usb usb2: SerialNumber: ... [ 1.186493] hub 2-0:1.0: USB hub found [ 1.186504] hub 2-0:1.0: 4 ports detected [ 1.187309] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 1.187314] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3 [ 1.187477] xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010 [ 1.187806] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 1.187810] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4 [ 1.187813] xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.187857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.187860] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.187862] usb usb3: Product: xHCI Host Controller [ 1.187864] usb usb3: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.187866] usb usb3: SerialNumber: ... [ 1.187999] nvme nvme1: pci function 0000:04:00.0 [ 1.188002] nvme nvme0: pci function 0000:01:00.0 [ 1.188216] hub 3-0:1.0: USB hub found [ 1.188233] hub 3-0:1.0: 6 ports detected [ 1.189314] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.189343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 1.189345] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.189348] usb usb4: Product: xHCI Host Controller [ 1.189350] usb usb4: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.189351] usb usb4: SerialNumber: ... [ 1.189464] hub 4-0:1.0: USB hub found [ 1.189476] hub 4-0:1.0: 4 ports detected [ 1.190328] xhci_hcd 0000:0e:00.3: xHCI Host Controller [ 1.190334] xhci_hcd 0000:0e:00.3: new USB bus registered, assigned bus number 5 [ 1.190452] xhci_hcd 0000:0e:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010 [ 1.190702] xhci_hcd 0000:0e:00.3: xHCI Host Controller [ 1.190706] xhci_hcd 0000:0e:00.3: new USB bus registered, assigned bus number 6 [ 1.190708] xhci_hcd 0000:0e:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.190747] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.190750] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.190752] usb usb5: Product: xHCI Host Controller [ 1.190753] usb usb5: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.190755] usb usb5: SerialNumber: ... [ 1.190878] hub 5-0:1.0: USB hub found [ 1.190887] hub 5-0:1.0: 4 ports detected [ 1.191122] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.191149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 1.191152] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.191154] usb usb6: Product: xHCI Host Controller [ 1.191155] usb usb6: Manufacturer: Linux 6.10.0-desktop-1omv2490 xhci-hcd [ 1.191157] usb usb6: SerialNumber: ... [ 1.191263] hub 6-0:1.0: USB hub found [ 1.191272] hub 6-0:1.0: 4 ports detected [ 1.191654] nvme nvme0: missing or invalid SUBNQN field. [ 1.191675] nvme nvme0: D3 entry latency set to 10 seconds [ 1.192963] nvme nvme0: 8/0/0 default/read/poll queues [ 1.194348] nvme nvme1: 16/0/0 default/read/poll queues [ 1.194523] nvme0n1: p1 p2 [ 1.195713] libata version 3.00 loaded. [ 1.195867] ACPI: bus type drm_connector registered [ 1.197528] nvme1n1: p1 p2 p3 [ 1.203000] ahci 0000:08:00.0: version 3.0 [ 1.203147] ahci 0000:08:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 1.203151] ahci 0000:08:00.0: 1/1 ports implemented (port mask 0x1) [ 1.203153] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.204052] scsi host0: ahci [ 1.204121] ata1: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700100 irq 92 lpm-pol 0 [ 1.206173] ahci 0000:09:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 1.206178] ahci 0000:09:00.0: 2/2 ports implemented (port mask 0x3) [ 1.206180] ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.206438] scsi host1: ahci [ 1.206545] scsi host2: ahci [ 1.206632] ata2: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 93 lpm-pol 0 [ 1.206636] ata3: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600180 irq 94 lpm-pol 0 [ 1.423160] usb 1-6: new full-speed USB device number 2 using xhci_hcd [ 1.431159] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.431165] usb 3-3: new low-speed USB device number 2 using xhci_hcd [ 1.493160] tsc: Refined TSC clocksource calibration: 3399.999 MHz [ 1.493165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024d9464a, max_idle_ns: 440795287124 ns [ 1.493183] clocksource: Switched to clocksource tsc [ 1.514265] ata1: SATA link down (SStatus 0 SControl 300) [ 1.560111] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.560114] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.560116] usb 5-1: Product: USB2.0 Hub [ 1.574916] usb 3-3: New USB device found, idVendor=0665, idProduct=5161, bcdDevice= 0.02 [ 1.574919] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.574921] usb 3-3: Product: USB to Serial [ 1.574923] usb 3-3: Manufacturer: INNO TECH [ 1.579025] usb 1-6: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 1.579027] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.607142] hub 5-1:1.0: USB hub found [ 1.607735] hub 5-1:1.0: 4 ports detected [ 1.669176] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.669197] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.669499] ata2.00: supports DRM functions and may not be fully accessible [ 1.669502] ata2.00: ATA-11: KINGSTON SUV500240G, 003056RI, max UDMA/133 [ 1.669579] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.670275] ata3.00: LPM support broken, forcing max_power [ 1.671678] ata2.00: supports DRM functions and may not be fully accessible [ 1.671712] ata3.00: ATA-9: CT120BX500SSD1, M6CR013, max UDMA/133 [ 1.673156] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.673475] ata2.00: configured for UDMA/133 [ 1.673560] scsi 1:0:0:0: Direct-Access ATA KINGSTON SUV5002 56RI PQ: 0 ANSI: 5 [ 1.678045] ata3.00: Features: Dev-Sleep [ 1.681277] ata3.00: LPM support broken, forcing max_power [ 1.689055] ata3.00: configured for UDMA/133 [ 1.699167] usb 3-6: new full-speed USB device number 3 using xhci_hcd [ 1.700609] scsi 2:0:0:0: Direct-Access ATA CT120BX500SSD1 R013 PQ: 0 ANSI: 5 [ 1.702418] Linux agpgart interface v0.103 [ 1.705855] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.705859] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.705870] sd 1:0:0:0: [sda] Write Protect is off [ 1.705872] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.705873] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.705889] sd 2:0:0:0: [sdb] Write Protect is off [ 1.705890] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.705892] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.705913] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.705913] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.705945] sd 2:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 1.707054] sdb: sdb1 sdb2 [ 1.707126] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.707635] sda: sda1 sda2 sda3 sda4 [ 1.707727] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.839855] usb 3-6: config 1 has an invalid interface number: 2 but max is 1 [ 1.839860] usb 3-6: config 1 has no interface number 1 [ 1.851856] usb 3-6: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00 [ 1.851859] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.851861] usb 3-6: Product: AURA LED Controller [ 1.851863] usb 3-6: Manufacturer: AsusTek Computer Inc. [ 1.851864] usb 3-6: SerialNumber: ... [ 1.864801] hid: raw HID events driver (C) Jiri Kosina [ 1.878896] usbcore: registered new interface driver usbhid [ 1.878898] usbhid: USB HID core driver [ 1.880756] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:07:00.3-3/input0 [ 1.880820] hid-generic 0003:0B05:18F3.0002: hiddev1,hidraw1: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:07:00.3-6/input2 [ 1.895163] usb 5-1.1: new full-speed USB device number 3 using xhci_hcd [ 1.962541] [drm] amdgpu kernel modesetting enabled. [ 1.967989] amdgpu: Virtual CRAT table created for CPU [ 1.967999] amdgpu: Topology: Add CPU node [ 1.968104] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1043:0x0577 0xC1). [ 1.968112] [drm] register mmio base: 0xFCD00000 [ 1.968113] [drm] register mmio size: 524288 [ 1.971003] [drm] add ip block number 0 <nv_common> [ 1.971004] [drm] add ip block number 1 <gmc_v10_0> [ 1.971005] [drm] add ip block number 2 <navi10_ih> [ 1.971006] [drm] add ip block number 3 <psp> [ 1.971007] [drm] add ip block number 4 <smu> [ 1.971008] [drm] add ip block number 5 <dm> [ 1.971009] [drm] add ip block number 6 <gfx_v10_0> [ 1.971010] [drm] add ip block number 7 <sdma_v5_0> [ 1.971011] [drm] add ip block number 8 <vcn_v2_0> [ 1.971012] [drm] add ip block number 9 <jpeg_v2_0> [ 1.971036] amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 1.971038] amdgpu: ATOM BIOS: 115-D199PI0-101 [ 1.992748] usb 5-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11 [ 1.992752] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.992754] usb 5-1.1: Product: USB Receiver [ 1.992756] usb 5-1.1: Manufacturer: Logitech [ 2.003096] [drm] VCN decode is enabled in VM mode [ 2.003098] [drm] VCN encode is enabled in VM mode [ 2.016010] [drm] JPEG decode is enabled in VM mode [ 2.016031] amdgpu 0000:0c:00.0: vgaarb: deactivate vga console [ 2.016033] amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 2.016064] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 2.016070] amdgpu 0000:0c:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [ 2.016072] amdgpu 0000:0c:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 2.016079] [drm] Detected VRAM RAM=8176M, BAR=256M [ 2.016080] [drm] RAM width 256bits GDDR6 [ 2.016137] [drm] amdgpu: 8176M of VRAM memory ready [ 2.016139] [drm] amdgpu: 16008M of GTT memory ready. [ 2.016148] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.016276] [drm] PCIE GART of 512M enabled (table at 0x0000008001000000). [ 2.016863] [drm] Found VCN firmware Version ENC: 1.22 DEC: 7 VEP: 0 Revision: 1 [ 2.016869] amdgpu 0000:0c:00.0: amdgpu: Will use PSP to load VCN firmware [ 2.068701] amdgpu 0000:0c:00.0: amdgpu: reserve 0x900000 from 0x81fd000000 for PSP TMR [ 2.111699] amdgpu 0000:0c:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 2.117595] amdgpu 0000:0c:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 2.117597] amdgpu 0000:0c:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 2.117650] amdgpu 0000:0c:00.0: amdgpu: use vbios provided pptable [ 2.117651] amdgpu 0000:0c:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5 [ 2.127954] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C52B.0003/input/input2 [ 2.179227] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0e:00.3-1.1/input0 [ 2.181628] amdgpu 0000:0c:00.0: amdgpu: SMU is initialized successfully! [ 2.181956] [drm] Display Core v3.2.281 initialized on DCN 2.0 [ 2.181958] [drm] DP-HDMI FRL PCON supported [ 2.182909] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:046D:C52B.0004/input/input3 [ 2.182987] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:046D:C52B.0004/input/input4 [ 2.234227] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:046D:C52B.0004/input/input5 [ 2.234306] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0e:00.3-1.1/input1 [ 2.236919] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0e:00.3-1.1/input2 [ 2.302160] usb 5-1.3: new high-speed USB device number 4 using xhci_hcd [ 2.380861] usb 5-1.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 2.380864] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.380865] usb 5-1.3: Product: USB2.0 Hub [ 2.439131] hub 5-1.3:1.0: USB hub found [ 2.439737] hub 5-1.3:1.0: 4 ports detected [ 2.444868] usbcore: registered new interface driver usbmouse [ 2.445118] usbcore: registered new interface driver usbkbd [ 2.545407] logitech-djreceiver 0003:046D:C52B.0005: hiddev2,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0e:00.3-1.1/input2 [ 2.581355] [drm] kiq ring mec 2 pipe 1 q 0 [ 2.583406] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 2.583743] [drm] JPEG decode initialized successfully. [ 2.653353] input: Logitech Wireless Device PID:407b Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input7 [ 2.653399] input: Logitech Wireless Device PID:407b Mouse as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input8 [ 2.653442] hid-generic 0003:046D:407B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:407b] on usb-0000:0e:00.3-1.1/input2:1 [ 2.713109] input: Logitech MX Vertical as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.1/5-1.1:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input12 [ 2.713160] logitech-hidpp-device 0003:046D:407B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-0000:0e:00.3-1.1/input2:1 [ 2.718161] usb 5-1.3.2: new full-speed USB device number 5 using xhci_hcd [ 2.815759] usb 5-1.3.2: New USB device found, idVendor=046a, idProduct=0114, bcdDevice= 1.26 [ 2.815762] usb 5-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.815764] usb 5-1.3.2: Product: CHERRY Wireless Device [ 2.815766] usb 5-1.3.2: Manufacturer: Cherry GmbH [ 2.892885] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.3/5-1.3.2/5-1.3.2:1.0/0003:046A:0114.0007/input/input13 [ 2.944225] hid-generic 0003:046A:0114.0007: input,hidraw4: USB HID v1.11 Keyboard [Cherry GmbH CHERRY Wireless Device] on usb-0000:0e:00.3-1.3.2/input0 [ 2.948940] input: Cherry GmbH CHERRY Wireless Device Mouse as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.3/5-1.3.2/5-1.3.2:1.1/0003:046A:0114.0008/input/input14 [ 2.949009] input: Cherry GmbH CHERRY Wireless Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.3/5-1.3.2/5-1.3.2:1.1/0003:046A:0114.0008/input/input15 [ 3.000223] input: Cherry GmbH CHERRY Wireless Device System Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.3/5-1.3.2/5-1.3.2:1.1/0003:046A:0114.0008/input/input16 [ 3.000265] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-1/5-1.3/5-1.3.2/5-1.3.2:1.1/0003:046A:0114.0008/input/input18 [ 3.000319] hid-generic 0003:046A:0114.0008: input,hiddev3,hidraw5: USB HID v1.11 Mouse [Cherry GmbH CHERRY Wireless Device] on usb-0000:0e:00.3-1.3.2/input1 [ 3.085157] [drm] Fence fallback timer expired on ring sdma0 [ 3.085213] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 3.085223] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 3.589157] [drm] Fence fallback timer expired on ring sdma0 [ 3.589204] amdgpu: Virtual CRAT table created for GPU [ 3.589402] amdgpu: Topology: Add dGPU node [0x731f:0x1002] kfd kfd: amdgpu: added device 1002:731f [ 3.589420] amdgpu 0000:0c:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40 [ 3.589423] amdgpu 0000:0c:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 3.589425] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 3.589427] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 3.589429] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 3.589430] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 3.589432] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 3.589434] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 3.589435] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 3.589437] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 3.589439] amdgpu 0000:0c:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 3.589440] amdgpu 0000:0c:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 3.589442] amdgpu 0000:0c:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0 [ 3.589444] amdgpu 0000:0c:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 8 [ 3.589445] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 8 [ 3.589447] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 8 [ 3.589449] amdgpu 0000:0c:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8 [ 3.590823] amdgpu 0000:0c:00.0: amdgpu: Using BACO for runtime pm [ 3.591130] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:0c:00.0 on minor 0 [ 3.602521] fbcon: amdgpudrmfb (fb0) is primary device [ 3.602524] fbcon: Deferring console take-over [ 3.602525] amdgpu 0000:0c:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 3.621713] [drm] DSC precompute is not needed. [ 3.688848] EXT4-fs (nvme0n1p1): orphan cleanup on readonly fs [ 3.689041] EXT4-fs (nvme0n1p1): mounted filesystem HASH_972-AD2C-23B0-2535-E926A35248A1 ro with ordered data mode. Quota mode: none. [ 4.828374] EXT4-fs (nvme0n1p1): re-mounted HASH_972-AD2C-23B0-2535-E926A35248A1 r/w. Quota mode: none. [ 4.955780] zram0: detected capacity change from 0 to 16777216 [ 4.970438] Adding 36064320k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:36064320k SS [ 4.984088] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDsc [ 4.997777] dca service started, version 1.12.1 [ 5.025844] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.025848] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 5.026473] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 5.027524] igb: Intel(R) Gigabit Ethernet Network Driver [ 5.027526] igb: Copyright (c) 3B2C-7BF4 Intel Corporation. [ 5.034186] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.036247] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.036374] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 5.040189] tpm_crb MSFT0101:00: Disabling hwrng [ 5.045682] asus_wmi: ASUS WMI generic driver loaded [ 5.046160] Bluetooth: Core ver 2.22 [ 5.046174] NET: Registered PF_BLUETOOTH protocol family [ 5.046176] Bluetooth: HCI device and connection manager initialized [ 5.046179] Bluetooth: HCI socket layer initialized [ 5.046181] Bluetooth: L2CAP socket layer initialized [ 5.046183] Bluetooth: SCO socket layer initialized [ 5.048922] asus_wmi: Initialization: 0x0 [ 5.048984] asus_wmi: BIOS WMI version: 0.9 [ 5.049191] asus_wmi: SFUN value: 0x0 [ 5.049195] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 5.050012] Intel(R) Wireless WiFi driver for Linux [ 5.050942] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19 [ 5.052394] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 5.052397] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.054748] iwlwifi 0000:06:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000 [ 5.054756] iwlwifi 0000:06:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100 [ 5.064165] usbcore: registered new interface driver btusb [ 5.067407] pps pps0: new PPS source ptp0 [ 5.070228] igb 0000:05:00.0: added PHC on eth0 [ 5.070252] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 5.070254] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) A4CDB348790B4A9AC9A3218FC3C63622 [ 5.070469] igb 0000:05:00.0: eth0: PBA No: G69016-005 [ 5.070471] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 5.092020] iwlwifi 0000:06:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 5.092310] iwlwifi 0000:06:00.0: loaded firmware version 77.a20fb07d.0 cc-a0-77.ucode op_mode iwlmvm [ 5.094079] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client [ 5.094082] snd_hda_intel 0000:0c:00.1: Force to non-snoop mode [ 5.102361] kvm_amd: TSC scaling supported [ 5.102364] kvm_amd: Nested Virtualization enabled [ 5.102366] kvm_amd: Nested Paging enabled [ 5.102367] kvm_amd: LBR virtualization supported [ 5.102375] kvm_amd: Virtual VMLOAD VMSAVE supported [ 5.102376] kvm_amd: Virtual GIF supported [ 5.106775] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 5.109657] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input20 [ 5.109692] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 5.109717] Bluetooth: hci0: Boot Address: 0x24800 [ 5.109719] Bluetooth: hci0: Firmware Version: 132-3.24 [ 5.109721] Bluetooth: hci0: Firmware already loaded [ 5.109787] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input21 [ 5.109949] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input22 [ 5.110384] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input23 [ 5.110465] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input24 [ 5.110520] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.0/0000:0b:00.0/0000:0c:00.1/sound/card0/input25 [ 5.111935] AMD Address Translation Library initialized [ 5.116513] EDAC MC: Ver: 3.0.0 [ 5.118112] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 5.118219] MCE: In-kernel MCE decoding enabled. [ 5.121307] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000 [ 5.121682] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.121686] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.121689] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.121692] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 5.121693] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 5.121695] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 5.121696] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 5.121698] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 5.121700] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 5.138644] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input26 [ 5.138725] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input27 [ 5.138805] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input28 [ 5.138984] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input29 [ 5.139046] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input30 [ 5.139124] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input31 [ 5.159906] igb 0000:05:00.0 enp5s0: renamed from eth0 [ 5.170335] intel_rapl_common: Found RAPL domain package [ 5.170338] intel_rapl_common: Found RAPL domain core [ 5.178383] iwlwifi 0000:06:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 5.178460] thermal thermal_zone0: failed to read out thermal zone (-61) [ 5.300362] iwlwifi 0000:06:00.0: Detected RF HR B3, rfid=0x10a100 [ 5.365961] iwlwifi 0000:06:00.0: base HW address: D8D66C29655A887E34EBA427BB1ACB50 [ 5.386595] iwlwifi 0000:06:00.0 wlp6s0: renamed from wlan0 [ 5.429162] thermal thermal_zone0: failed to read out thermal zone (-61) [ 5.685160] thermal thermal_zone0: failed to read out thermal zone (-61) [ 5.941161] thermal thermal_zone0: failed to read out thermal zone (-61) [ 6.197161] thermal thermal_zone0: failed to read out thermal zone (-61) [ 6.453160] thermal thermal_zone0: failed to read out thermal zone (-61) [ 6.709159] thermal thermal_zone0: failed to read out thermal zone (-61) [ 6.965160] thermal thermal_zone0: failed to read out thermal zone (-61) [ 7.191669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.191671] Bluetooth: BNEP filters: protocol multicast [ 7.191674] Bluetooth: BNEP socket layer initialized [ 7.192438] Bluetooth: MGMT ver 1.22 [ 7.221162] thermal thermal_zone0: failed to read out thermal zone (-61) [ 7.458199] iwlwifi 0000:06:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 7.484224] thermal thermal_zone0: failed to read out thermal zone (-61) [ 7.721711] NET: Registered PF_PACKET protocol family [ 8.301266] Bluetooth: RFCOMM TTY layer initialized [ 8.301272] Bluetooth: RFCOMM socket layer initialized [ 8.301273] Bluetooth: RFCOMM ver 1.11 [ 8.322575] block nvme1n1: No UUID available providing old NGUID [ 10.086701] igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 89.121392] logitech-hidpp-device 0003:046D:407B.0006: HID++ 4.5 device connected.