[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 6.1.0-31-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64 root=UUID=HASH_A3F-4752-FFA3-4217-B23198733B0D ro persistent quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000943ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000094400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf0e0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf0e1000-0x00000000bf129fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf12a000-0x00000000bf131fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf132000-0x00000000bf377fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf378000-0x00000000bf378fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf379000-0x00000000bf37efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf37f000-0x00000000bf380fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf381000-0x00000000bf390fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf391000-0x00000000bf39bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf39c000-0x00000000bf3f0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3f1000-0x00000000bf433fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf434000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Acer Aspire M3970/Aspire M3970, BIOS P02-A2 10/31/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2993.129 MHz processor [ 0.001288] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001291] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001299] last_pfn = 0x23f800 max_arch_pfn = 0x400000000 [ 0.001816] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002244] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.002252] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.012118] found SMP MP-table at [mem 0x000fcfb0-0x000fcfbf] RAMDISK: [mem 0x30baf000-0x345cefff] ACPI: Early table checksum verification disabled [ 0.012451] ACPI: RSDP 0x00000000000F0450 000024 (v02 ACRSYS) [ 0.012455] ACPI: XSDT 0x00000000BF12A068 000054 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.012460] ACPI: FACP 0x00000000BF131298 0000F4 (v04 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.012465] ACPI: DSDT 0x00000000BF12A150 007142 (v02 ACRSYS ACRPRDCT 00000000 INTL 20051117) [ 0.012469] ACPI: FACS 0x00000000BF393F80 000040 [ 0.012471] ACPI: APIC 0x00000000BF131390 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.012474] ACPI: SSDT 0x00000000BF131408 000102 (v01 ACRSYS ACRPRDCT 00000001 MSFT 03000001) [ 0.012477] ACPI: MCFG 0x00000000BF131510 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097) [ 0.012480] ACPI: SLIC 0x00000000BF131550 000176 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.012483] ACPI: HPET 0x00000000BF1316C8 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000004) [ 0.012486] ACPI: Reserving FACP table memory at [mem 0xbf131298-0xbf13138b] ACPI: Reserving DSDT table memory at [mem 0xbf12a150-0xbf131291] ACPI: Reserving FACS table memory at [mem 0xbf393f80-0xbf393fbf] ACPI: Reserving APIC table memory at [mem 0xbf131390-0xbf131401] ACPI: Reserving SSDT table memory at [mem 0xbf131408-0xbf131509] ACPI: Reserving MCFG table memory at [mem 0xbf131510-0xbf13154b] ACPI: Reserving SLIC table memory at [mem 0xbf131550-0xbf1316c5] ACPI: Reserving HPET table memory at [mem 0xbf1316c8-0xbf1316ff] No NUMA configuration found [ 0.012570] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff] NODE_DATA(0) allocated [mem 0x23f7d1000-0x23f7fbfff] Zone ranges: [ 0.012898] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000023f7fffff] Device empty [ 0.012903] Movable zone start for each node [ 0.012906] Early memory node ranges [ 0.012906] node 0: [mem 0x0000000000001000-0x0000000000093fff] node 0: [mem 0x0000000000100000-0x00000000bf0e0fff] node 0: [mem 0x00000000bf37f000-0x00000000bf380fff] node 0: [mem 0x00000000bf434000-0x00000000bf7fffff] node 0: [mem 0x0000000100000000-0x000000023f7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012952] On node 0, zone DMA: 108 pages in unavailable ranges [ 0.019355] On node 0, zone DMA32: 670 pages in unavailable ranges [ 0.019370] On node 0, zone DMA32: 179 pages in unavailable ranges [ 0.019682] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.019714] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.019877] ACPI: PM-Timer IO Port: 0x408 [ 0.019884] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.019898] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.019901] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.019903] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.019907] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.019908] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.019912] TSC deadline timer available [ 0.019913] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.019932] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00094000-0x00094fff] PM: hibernation: Registered nosave memory: [mem 0x00095000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbf0e1000-0xbf129fff] PM: hibernation: Registered nosave memory: [mem 0xbf12a000-0xbf131fff] PM: hibernation: Registered nosave memory: [mem 0xbf132000-0xbf377fff] PM: hibernation: Registered nosave memory: [mem 0xbf378000-0xbf378fff] PM: hibernation: Registered nosave memory: [mem 0xbf379000-0xbf37efff] PM: hibernation: Registered nosave memory: [mem 0xbf381000-0xbf390fff] PM: hibernation: Registered nosave memory: [mem 0xbf391000-0xbf39bfff] PM: hibernation: Registered nosave memory: [mem 0xbf39c000-0xbf3f0fff] PM: hibernation: Registered nosave memory: [mem 0xbf3f1000-0xbf433fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xbf800000-0xfed1bfff] available for PCI devices [ 0.019952] Booting paravirtualized kernel on bare hardware [ 0.019954] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.024852] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.025021] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.025027] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.025030] pcpu-alloc: [0] 0 1 2 3 [ 0.025060] Fallback order for Node 0: 0 [ 0.025062] Built 1 zonelists, mobility grouping on. Total pages: 2059260 [ 0.025064] Policy zone: Normal [ 0.025065] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64 root=UUID=HASH_A3F-4752-FFA3-4217-B23198733B0D ro persistent quiet [ 0.025123] Unknown kernel command line parameters "persistent BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64", will be passed to user space. [ 0.025534] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.025746] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.025803] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.025808] software IO TLB: area num 4. [ 0.048972] Memory: 3138872K/8368392K available (14342K kernel code, 2338K rwdata, 9084K rodata, 2796K init, 17392K bss, 324324K reserved, 0K cma-reserved) [ 0.049285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.049303] Kernel/User page tables isolation: enabled [ 0.049342] ftrace: allocating 40309 entries in 158 pages [ 0.055644] ftrace: allocated 158 pages with 5 groups [ 0.056238] Dynamic Preempt: voluntary [ 0.056277] rcu: Preemptible hierarchical RCU implementation. [ 0.056278] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.056279] Trampoline variant of Tasks RCU enabled. [ 0.056280] Rude variant of Tasks RCU enabled. [ 0.056280] Tracing variant of Tasks RCU enabled. [ 0.056281] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.056282] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.061267] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.061456] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.065824] Console: colour VGA+ 80x25 [ 0.065839] printk: console [tty0] enabled [ 0.065863] ACPI: Core revision 20220331 [ 0.065939] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.065956] APIC: Switch to symmetric I/O mode setup [ 0.066399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085956] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b24ead8a76, max_idle_ns: 440795318346 ns [ 0.085962] Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.25 BogoMIPS (lpj=11972516) [ 0.085985] CPU0: Thermal monitoring enabled (TM1) [ 0.086002] process: using mwait in idle threads [ 0.086005] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.086006] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.086009] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.086011] Spectre V2 : Mitigation: Retpolines [ 0.086011] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.086012] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.086013] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.086014] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.086016] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.086017] MDS: Mitigation: Clear CPU buffers [ 0.086018] MMIO Stale Data: Unknown: No mitigations [ 0.086022] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.086024] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.086025] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.086026] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.086027] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.099071] Freeing SMP alternatives memory: 36K [ 0.099075] pid_max: default: 32768 minimum: 301 [ 0.099146] LSM: Security Framework initializing [ 0.099166] landlock: Up and running. [ 0.099167] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.099198] AppArmor: AppArmor initialized [ 0.099200] TOMOYO Linux initialized [ 0.099205] LSM support for eBPF active [ 0.099255] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.099266] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.101824] smpboot: CPU0: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.101959] cblist_init_generic: Setting adjustable number of callback queues. [ 0.101959] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.101959] cblist_init_generic: Setting adjustable number of callback queues. [ 0.101959] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.101959] cblist_init_generic: Setting adjustable number of callback queues. [ 0.101959] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.101959] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.101959] ... version: 3 [ 0.101959] ... bit width: 48 [ 0.101959] ... generic registers: 8 [ 0.101959] ... value mask: 0000ffffffffffff [ 0.101959] ... max period: 00007fffffffffff [ 0.101959] ... fixed-purpose events: 3 [ 0.101959] ... event mask: 00000007000000ff [ 0.101959] signal: max sigframe size: 1776 [ 0.101959] Estimated ratio of average max frequency by base frequency (times 1024): 1058 [ 0.101959] rcu: Hierarchical SRCU implementation. [ 0.101959] rcu: Max phase no-delay instances is 1000. [ 0.101959] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.101959] smp: Bringing up secondary CPUs ... [ 0.101959] x86: Booting SMP configuration: [ 0.101959] .... node #0, CPUs: #1 #2 #3 [ 0.108029] smp: Brought up 1 node, 4 CPUs [ 0.108029] smpboot: Max logical packages: 1 [ 0.108029] smpboot: Total of 4 processors activated (23945.03 BogoMIPS) [ 0.118440] node 0 deferred pages initialised in 8ms [ 0.118440] devtmpfs: initialized [ 0.118440] x86/mm: Memory block size: 128MB [ 0.118833] ACPI: PM: Registering ACPI NVS region [mem 0xbf0e1000-0xbf129fff] (299008 bytes) [ 0.118833] ACPI: PM: Registering ACPI NVS region [mem 0xbf378000-0xbf378fff] (4096 bytes) [ 0.118833] ACPI: PM: Registering ACPI NVS region [mem 0xbf391000-0xbf39bfff] (45056 bytes) [ 0.118833] ACPI: PM: Registering ACPI NVS region [mem 0xbf3f1000-0xbf433fff] (274432 bytes) [ 0.118833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.118833] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.118833] pinctrl core: initialized pinctrl subsystem [ 0.118833] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.118881] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.118965] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.119046] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.119072] thermal_sys: Registered thermal governor 'fair_share' [ 0.119072] thermal_sys: Registered thermal governor 'bang_bang' [ 0.119072] thermal_sys: Registered thermal governor 'step_wise' [ 0.119072] thermal_sys: Registered thermal governor 'user_space' [ 0.119072] thermal_sys: Registered thermal governor 'power_allocator' [ 0.119072] cpuidle: using governor ladder [ 0.119072] cpuidle: using governor menu [ 0.119072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.119072] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.119072] PCI: not using MMCONFIG [ 0.119072] PCI: Using configuration type 1 for base access [ 0.119072] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.119072] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.122379] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.126031] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.126033] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.126374] ACPI: Added _OSI(Module Device) [ 0.126375] ACPI: Added _OSI(Processor Device) [ 0.126376] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126377] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128984] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.129606] ACPI: Dynamic OEM Table Load: [ 0.129612] ACPI: SSDT 0xFFFF8C6A4094A400 00038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.129862] ACPI: Dynamic OEM Table Load: [ 0.129865] ACPI: SSDT 0xFFFF8C6A40A0C240 000084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.130412] ACPI: Interpreter enabled [ 0.130423] ACPI: PM: (supports S0 S3 S4 S5) [ 0.130424] ACPI: Using IOAPIC for interrupt routing [ 0.130444] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.130490] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.130494] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.130776] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.130777] PCI: Using E820 reservations for host bridge windows [ 0.130887] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.131065] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.134523] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.134528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] PCI host bridge to bus 0000:00 [ 0.134948] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.135036] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.135069] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.135192] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.135223] pci 0000:00:16.0: reg 0x10: [mem 0xfb208000-0xfb20800f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.135421] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.135445] pci 0000:00:1a.0: reg 0x10: [mem 0xfb207000-0xfb2073ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.135674] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.135704] pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.135937] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.136078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.136194] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.136334] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.136446] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.136469] pci 0000:00:1d.0: reg 0x10: [mem 0xfb206000-0xfb2063ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.136687] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.136945] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.136968] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] pci 0000:00:1f.2: reg 0x24: [mem 0xfb205000-0xfb2057ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.137186] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.137216] pci 0000:00:1f.3: reg 0x10: [mem 0xfb204000-0xfb2040ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] pci 0000:01:00.0: [10de:0de5] type 00 class 0x030000 [ 0.137385] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.137430] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.137538] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff] pci 0000:01:00.1: enabling Extended Tags [ 0.137647] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.145987] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.146171] pci 0000:02:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit] pci 0000:02:00.0: enabling Extended Tags [ 0.146403] pci 0000:02:00.0: supports D1 D2 [ 0.146405] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.146601] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xfb100000-0xfb1fffff] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.146760] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] pci 0000:03:00.0: reg 0x18: [mem 0xda104000-0xda104fff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref] pci 0000:03:00.0: supports D1 D2 [ 0.147023] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.147276] pci 0000:00:1c.5: PCI bridge to [bus 03] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.5: bridge window [mem 0xda100000-0xda1fffff 64bit pref] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.147679] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.147714] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.147748] ACPI: PCI: Interrupt link LNKD configured for IRQ 4 [ 0.147783] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.147819] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.147854] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.147888] ACPI: PCI: Interrupt link LNKH configured for IRQ 3 [ 0.148036] iommu: Default domain type: Translated [ 0.148036] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.148036] pps_core: LinuxPPS API ver. 1 registered [ 0.148036] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.148036] PTP clock support registered [ 0.148036] EDAC MC: Ver: 3.0.0 [ 0.148036] NetLabel: Initializing [ 0.148036] NetLabel: domain hash size = 128 [ 0.148036] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.148036] NetLabel: unlabeled traffic allowed by default [ 0.148036] PCI: Using ACPI for IRQ routing [ 0.157276] PCI: pci_cache_line_size set to 64 bytes [ 0.157329] e820: reserve RAM buffer [mem 0x00094400-0x0009ffff] e820: reserve RAM buffer [mem 0xbf0e1000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf381000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.157995] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.157995] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.157995] vgaarb: loaded [ 0.158845] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.158856] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.161964] clocksource: Switched to clocksource tsc-early [ 0.161967] VFS: Disk quotas dquot_6.6.0 [ 0.161967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.161967] AppArmor: AppArmor Filesystem Enabled [ 0.161967] pnp: PnP ACPI init [ 0.161967] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.161967] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.161967] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.161967] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.161967] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.161967] system 00:01: [io 0x0a00-0x0a1f] has been reserved [ 0.161967] system 00:01: [io 0x0a30-0x0a3f] has been reserved [ 0.161967] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.161967] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.161967] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.161967] system 00:04: [io 0x1180-0x119f] has been reserved [ 0.161967] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.161967] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.161967] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.161967] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.161967] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.161967] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.161967] pnp: PnP ACPI: found 6 devices [ 0.168986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.169081] NET: Registered PF_INET protocol family [ 0.169209] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.171069] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.171096] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.171137] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.171373] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.171637] TCP: Hash tables configured (established 65536 bind 65536) [ 0.171717] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.171766] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.171796] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.171857] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.171864] NET: Registered PF_XDP protocol family [ 0.171877] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xfb100000-0xfb1fffff] pci 0000:00:1c.5: PCI bridge to [bus 03] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.5: bridge window [mem 0xda100000-0xda1fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref] pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb1fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 2 [mem 0xda100000-0xda1fffff 64bit pref] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 29343 usecs [ 0.230034] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 27316 usecs [ 0.230057] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.230087] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.230237] PCI: CLS 64 bytes, default 64 [ 0.230254] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.230255] software IO TLB: mapped [mem 0x00000000bb0e1000-0x00000000bf0e1000] (64MB) [ 0.230301] Trying to unpack rootfs image as initramfs... [ 0.230620] Initialise system trusted keyrings [ 0.230644] Key type blacklist registered [ 0.230684] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.232117] zbud: loaded [ 0.232384] integrity: Platform Keyring initialized [ 0.232394] integrity: Machine keyring initialized [ 0.232396] Key type asymmetric registered [ 0.232397] Asymmetric key parser 'x509' registered [ 0.652622] Freeing initrd memory: 59520K [ 0.657329] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.657357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.657388] io scheduler mq-deadline registered [ 0.658392] pcieport 0000:00:01.0: PME: Signaling with IRQ 24 [ 0.658523] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25 [ 0.658699] pcieport 0000:00:1c.5: PME: Signaling with IRQ 26 [ 0.658793] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.659493] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.660016] Linux agpgart interface v0.103 [ 0.660066] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.660377] i8042: PNP: No PS/2 controller found. [ 0.660465] mousedev: PS/2 mouse device common for all mice [ 0.660479] rtc_cmos 00:02: RTC can wake from S4 [ 0.660789] rtc_cmos 00:02: registered as rtc0 [ 0.660836] rtc_cmos 00:02: setting system clock to 2025-02-22T10:23:01 UTC (1740219781) [ 0.660868] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.660979] intel_pstate: Intel P-state driver initializing [ 0.661446] ledtrig-cpu: registered to indicate activity on CPUs [ 0.671981] NET: Registered PF_INET6 protocol family [ 0.677968] Segment Routing with IPv6 [ 0.677993] In-situ OAM (IOAM) with IPv6 [ 0.678015] mip6: Mobile IPv6 [ 0.678020] NET: Registered PF_PACKET protocol family [ 0.678116] mpls_gso: MPLS GSO support [ 0.678565] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 0.678622] microcode: Microcode Update Driver: v2.2. [ 0.678626] IPI shorthand broadcast: enabled [ 0.678650] sched_clock: Marking stable (674045735, 4455835)->(687204605, -8703035) [ 0.678954] registered taskstats version 1 [ 0.678963] Loading compiled-in X.509 certificates [ 0.701715] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.701734] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.702076] zswap: loaded using pool lzo/zbud [ 0.702465] Key type .fscrypt registered [ 0.702467] Key type fscrypt-provisioning registered [ 0.706750] Key type encrypted registered [ 0.706754] AppArmor: AppArmor sha1 policy hashing enabled [ 0.706764] ima: No TPM chip found, activating TPM-bypass! [ 0.706766] ima: Allocated hash algorithm: sha256 [ 0.706777] ima: No architecture policies found [ 0.706793] evm: Initialising EVM extended attributes: [ 0.706794] evm: security.selinux [ 0.706795] evm: security.SMACK64 (disabled) [ 0.706796] evm: security.SMACK64EXEC (disabled) [ 0.706797] evm: security.SMACK64TRANSMUTE (disabled) [ 0.706798] evm: security.SMACK64MMAP (disabled) [ 0.706798] evm: security.apparmor [ 0.706799] evm: security.ima [ 0.706800] evm: security.capability [ 0.706800] evm: HMAC attrs: 0x1 [ 0.815196] clk: Disabling unused clocks [ 0.816300] Freeing unused decrypted memory: 2036K [ 0.816694] Freeing unused kernel image (initmem) memory: 2796K [ 0.816763] Write protecting the kernel read-only data: 26624k [ 0.817298] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 0.817537] Freeing unused kernel image (rodata/data gap) memory: 1156K [ 0.863129] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.863132] x86/mm: Checking user space page tables [ 0.904302] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.904307] Run /init as init process [ 0.904309] with arguments: [ 0.904310] /init [ 0.904310] persistent [ 0.904311] with environment: [ 0.904312] HOME=/ [ 0.904313] TERM=linux [ 0.904314] BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64 [ 0.980042] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.980070] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.996993] ACPI: button: Power Button [PWRF] ACPI: bus type USB registered [ 1.010861] usbcore: registered new interface driver usbfs [ 1.010874] usbcore: registered new interface driver hub [ 1.010889] usbcore: registered new device driver usb [ 1.022909] ACPI: bus type drm_connector registered [ 1.027976] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.028118] i2c i2c-0: 2/4 memory slots populated (from DMI) [ 1.033964] SCSI subsystem initialized [ 1.034537] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.035137] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.036132] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.036139] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.036154] ehci-pci 0000:00:1a.0: debug port 2 [ 1.040087] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb207000 [ 1.053999] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.054052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.054055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.054056] usb usb1: Product: EHCI Host Controller [ 1.054058] usb usb1: Manufacturer: Linux 6.1.0-31-amd64 ehci_hcd [ 1.054059] usb usb1: SerialNumber: ... [ 1.054187] hub 1-0:1.0: USB hub found [ 1.054194] hub 1-0:1.0: 2 ports detected [ 1.054347] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.054360] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.054472] xhci_hcd 0000:02:00.0: hcc params 0x040050a5 hci version 0x100 quirks 0x0000000000080490 [ 1.054680] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.054684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.054698] ehci-pci 0000:00:1d.0: debug port 2 [ 1.058668] libata version 3.00 loaded. [ 1.059133] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb206000 [ 1.059192] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.059195] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 1.059199] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.059239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.059241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.059243] usb usb2: Product: xHCI Host Controller [ 1.059244] usb usb2: Manufacturer: Linux 6.1.0-31-amd64 xhci-hcd [ 1.059245] usb usb2: SerialNumber: ... [ 1.059409] hub 2-0:1.0: USB hub found [ 1.059420] hub 2-0:1.0: 2 ports detected [ 1.059530] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.059548] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.059550] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.059552] usb usb4: Product: xHCI Host Controller [ 1.059553] usb usb4: Manufacturer: Linux 6.1.0-31-amd64 xhci-hcd [ 1.059554] usb usb4: SerialNumber: ... [ 1.059822] hub 4-0:1.0: USB hub found [ 1.059834] hub 4-0:1.0: 2 ports detected [ 1.063706] ahci 0000:00:1f.2: version 3.0 [ 1.063808] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 1.063904] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode [ 1.063908] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.066171] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, A42B61E7CA6F0CB8F847EE018CCD21B6, XID 2c9, IRQ 27 [ 1.066176] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.074112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.074115] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.074117] usb usb3: Product: EHCI Host Controller [ 1.074118] usb usb3: Manufacturer: Linux 6.1.0-31-amd64 ehci_hcd [ 1.074119] usb usb3: SerialNumber: ... [ 1.074254] hub 3-0:1.0: USB hub found [ 1.074260] hub 3-0:1.0: 2 ports detected [ 1.074633] scsi host0: ahci [ 1.074935] scsi host1: ahci [ 1.075043] scsi host2: ahci [ 1.075144] scsi host3: ahci [ 1.075244] scsi host4: ahci [ 1.075658] scsi host5: ahci [ 1.075706] ata1: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205100 irq 29 [ 1.075709] ata2: DUMMY [ 1.075709] ata3: DUMMY [ 1.075710] ata4: DUMMY [ 1.075712] ata5: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205300 irq 29 [ 1.075713] ata6: DUMMY [ 1.082071] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.252479] tsc: Refined TSC clocksource calibration: 2993.201 MHz [ 1.252486] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b252f03e9a, max_idle_ns: 440795342230 ns [ 1.295583] clocksource: Switched to clocksource tsc [ 1.297611] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 1.298462] Console: switching to colour dummy device 80x25 [ 1.298527] nouveau 0000:01:00.0: NVIDIA GF108 (0c1280a1) [ 1.300468] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.352468] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.397040] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.397185] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.397560] ata1.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133 [ 1.397678] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.398221] ata1.00: configured for UDMA/133 [ 1.398431] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5 [ 1.399665] ata5.00: ATAPI: ATAPI DVD A DH16ABSH, YA12, max UDMA/100 [ 1.400535] ata5.00: configured for UDMA/100 [ 1.402556] scsi 4:0:0:0: CD-ROM ATAPI DVD A DH16ABSH YA12 PQ: 0 ANSI: 5 [ 1.427084] nouveau 0000:01:00.0: bios: version XXX.XXX.XXX.XXX.05 [ 1.427964] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 1.493129] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.493134] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.493153] sd 0:0:0:0: [sda] Write Protect is off [ 1.493155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.493169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.493188] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.500786] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.500791] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.501232] hub 1-1:1.0: USB hub found [ 1.501407] hub 1-1:1.0: 6 ports detected [ 1.516942] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.516946] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.517232] hub 3-1:1.0: USB hub found [ 1.517439] hub 3-1:1.0: 8 ports detected [ 1.527369] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.527805] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.541590] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.541594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.590787] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.796463] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.808466] usb 3-1.3: new low-speed USB device number 3 using ehci-pci [ 1.920914] usb 3-1.3: New USB device found, idVendor=03f0, idProduct=584a, bcdDevice= 1.00 [ 1.920919] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.920921] usb 3-1.3: Product: HP 125 USB Optical Mouse [ 1.920922] usb 3-1.3: Manufacturer: PixArt [ 1.928438] hid: raw HID events driver (C) Jiri Kosina [ 1.933731] usbcore: registered new interface driver usbhid [ 1.933733] usbhid: USB HID core driver [ 1.935317] input: PixArt HP 125 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:03F0:584A.0001/input/input2 [ 1.935380] hid-generic 0003:03F0:584A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP 125 USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0 [ 2.000493] usb 3-1.4: new high-speed USB device number 4 using ehci-pci [ 2.023778] usb 1-1.1: New USB device found, idVendor=145f, idProduct=01a1, bcdDevice= 0.02 [ 2.023782] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.023784] usb 1-1.1: Product: Trust HD Webcam [ 2.023785] usb 1-1.1: Manufacturer: [ 2.108505] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 2.126439] usb 3-1.4: New USB device found, idVendor=7392, idProduct=7711, bcdDevice= 1.01 [ 2.126443] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.126445] usb 3-1.4: Product: 802.11 n WLAN [ 2.126446] usb 3-1.4: Manufacturer: Ralink [ 2.126447] usb 3-1.4: SerialNumber: ... [ 2.204469] usb 3-1.5: new high-speed USB device number 5 using ehci-pci [ 2.219784] usb 1-1.2: New USB device found, idVendor=25dd, idProduct=3111, bcdDevice= 1.00 [ 2.219788] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.219790] usb 1-1.2: Product: miniLector EVO [ 2.219791] usb 1-1.2: Manufacturer: BIT4ID [ 2.300469] usb 1-1.6: new full-speed USB device number 5 using ehci-pci [ 2.330431] usb 3-1.5: New USB device found, idVendor=0bda, idProduct=0152, bcdDevice=81.97 [ 2.330435] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.330437] usb 3-1.5: Product: USB2.0-CRW [ 2.330438] usb 3-1.5: Manufacturer: Generic [ 2.330439] usb 3-1.5: SerialNumber: ... [ 2.341674] hid-generic 0003:0BDA:0152.0002: hiddev0,hidraw1: USB HID v1.11 Device [Generic USB2.0-CRW] on usb-0000:00:1d.0-1.5/input1 [ 2.347224] usb-storage 3-1.5:1.0: USB Mass Storage device detected [ 2.347391] scsi host6: usb-storage 3-1.5:1.0 [ 2.347474] usbcore: registered new interface driver usb-storage [ 2.349335] usbcore: registered new interface driver uas [ 2.414407] usb 1-1.6: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00 [ 2.414411] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.414412] usb 1-1.6: Product: USB Audio Device [ 2.414414] usb 1-1.6: Manufacturer: C-Media Electronics Inc. [ 2.415428] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0D8C:0014.0003/input/input3 [ 2.420473] usb 3-1.8: new low-speed USB device number 6 using ehci-pci [ 2.472514] hid-generic 0003:0D8C:0014.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:1a.0-1.6/input3 [ 2.496646] cmedia_hs100b 0003:0D8C:0014.0003: Fixing CMedia HS-100B report descriptor [ 2.496731] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0D8C:0014.0003/input/input4 [ 2.538686] usb 3-1.8: New USB device found, idVendor=03f0, idProduct=564a, bcdDevice= 1.07 [ 2.538690] usb 3-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.538691] usb 3-1.8: Product: HP 125 Wired Keyboard [ 2.538693] usb 3-1.8: Manufacturer: LITEON Technology Corp. [ 2.542999] input: LITEON Technology Corp. HP 125 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03F0:564A.0004/input/input5 [ 2.556588] cmedia_hs100b 0003:0D8C:0014.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:1a.0-1.6/input3 [ 2.680545] hid-generic 0003:03F0:564A.0004: input,hidraw3: USB HID v1.11 Keyboard [LITEON Technology Corp. HP 125 Wired Keyboard] on usb-0000:00:1d.0-1.8/input0 [ 2.683628] input: LITEON Technology Corp. HP 125 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.1/0003:03F0:564A.0005/input/input6 [ 2.736740] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 2.736743] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.736746] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.736748] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.736749] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800302 00020030 [ 2.736751] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000 [ 2.736753] nouveau 0000:01:00.0: DRM: DCB outp 02: 08811392 00020020 [ 2.736754] nouveau 0000:01:00.0: DRM: DCB outp 03: 04822310 00000000 [ 2.736756] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.736757] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 2.736758] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 2.737480] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 2.740506] input: LITEON Technology Corp. HP 125 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.1/0003:03F0:564A.0005/input/input7 [ 2.740575] hid-generic 0003:03F0:564A.0005: input,hidraw4: USB HID v1.11 Device [LITEON Technology Corp. HP 125 Wired Keyboard] on usb-0000:00:1d.0-1.8/input1 [ 2.812838] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x60000, bo (____ptrval____) [ 2.812996] fbcon: nouveaudrmfb (fb0) is primary device [ 2.893805] Console: switching to colour frame buffer device 180x56 [ 2.938729] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 2.952938] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.000822] PM: Image not found (code -22) [ 3.199186] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 3.372070] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 3.375316] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 3.378317] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 3.381316] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS [ 3.384565] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS [ 3.387405] sd 6:0:0:0: [sdb] Media removed, stopped polling [ 3.387645] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3.389893] sd 6:0:0:1: [sdc] Media removed, stopped polling [ 3.390138] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 3.392383] sd 6:0:0:2: [sdd] Media removed, stopped polling [ 3.392594] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 3.395017] sd 6:0:0:3: [sde] Media removed, stopped polling [ 3.395201] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 3.397530] sd 6:0:0:4: [sdf] Media removed, stopped polling [ 3.397768] sd 6:0:0:4: [sdf] Attached SCSI removable disk [ 3.415053] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.275811] loop: module loaded [ 5.365910] fuse: init (API version 7.38) [ 5.386344] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 5.462558] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 5.462586] device-mapper: uevent: version 1.0.3 [ 5.462678] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 5.556509] lp: driver loaded but no devices found [ 5.562290] ppdev: user-space parallel port driver [ 5.607790] mc: Linux media interface: v0.10 [ 5.641709] videodev: Linux video capture interface: v2.00 [ 5.723743] v4l2loopback: loading out-of-tree module taints kernel. [ 5.723785] v4l2loopback: module verification failed: signature and/or required key missing - tainting kernel [ 5.724441] v4l2loopback driver version 0.12.7 loaded [ 6.408739] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 6.408787] at24 0-0051: supply vcc not found, using dummy regulator [ 6.410408] at24 0-0051: 256 byte spd EEPROM, read-only [ 6.410428] at24 0-0053: supply vcc not found, using dummy regulator [ 6.412027] at24 0-0053: 256 byte spd EEPROM, read-only [ 6.435816] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 6.435820] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 6.435821] RAPL PMU: hw unit of domain package 2^-16 Joules [ 6.435822] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 6.461907] iTCO_vendor_support: vendor-support=0 [ 6.513410] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.513439] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 6.513462] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 6.513488] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 6.513512] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 6.513533] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 6.513556] sd 6:0:0:4: Attached scsi generic sg6 type 0 [ 6.634409] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 6.634533] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 6.774551] cryptd: max_cpu_qlen set to 1000 [ 7.005252] snd_hda_intel 0000:01:00.1: Disabling MSI [ 7.005259] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 7.094357] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 7.094405] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 7.094450] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [ 7.094501] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 7.199106] snd_hda_codec_realtek hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0 [ 7.199417] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 7.199420] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.199422] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.199423] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 7.199424] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 7.199426] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 7.199427] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 7.199429] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 7.211961] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.212187] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 7.212390] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 7.212680] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.212878] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.243635] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 7.243877] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 7.245362] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 7.247532] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 7.247606] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 7.248620] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 7.312218] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 7.312996] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 7.576490] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci [ 7.580581] Adding 999420k swap on /dev/sda6. Priority:-2 extents:1 across:999420k FS [ 7.582617] intel_rapl_common: Found RAPL domain package [ 7.582621] intel_rapl_common: Found RAPL domain core [ 7.582622] intel_rapl_common: Found RAPL domain uncore [ 7.582629] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 7.699546] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0200 detected [ 7.754216] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 7.754740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.755191] usbcore: registered new interface driver rt2800usb [ 7.813031] rt2800usb 3-1.4:1.0 wlx001f1f44c1d2: renamed from wlan0 [ 7.923182] random: crng init done [ 8.039412] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: none. [ 8.342063] EXT4-fs (sda7): mounted filesystem with ordered data mode. Quota mode: none. [ 8.757055] EXT4-fs (sda8): mounted filesystem with ordered data mode. Quota mode: none. [ 10.510267] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 10.538593] rt2800usb 3-1.4:1.0: firmware: direct-loading firmware rt2870.bin [ 10.538603] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 12.043297] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 14.538392] usb 1-1.1: Found UVC 1.00 device Trust HD Webcam (145f:01a1) [ 14.558749] input: Trust HD Webcam: Trust HD Webca as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input19 [ 14.558852] usbcore: registered new interface driver uvcvideo [ 14.664817] usbcore: registered new interface driver snd-usb-audio [ 14.872307] Bluetooth: Core ver 2.22 [ 14.872337] NET: Registered PF_BLUETOOTH protocol family [ 14.872338] Bluetooth: HCI device and connection manager initialized [ 14.872343] Bluetooth: HCI socket layer initialized [ 14.872345] Bluetooth: L2CAP socket layer initialized [ 14.872348] Bluetooth: SCO socket layer initialized [ 16.173669] NET: Registered PF_QIPCRTR protocol family [ 21.427949] wlx001f1f44c1d2: authenticate with 107F2DDA2284E7ABB8D8BDEF8560C747 [ 21.450878] wlx001f1f44c1d2: send auth to 107F2DDA2284E7ABB8D8BDEF8560C747 (try 1/3) [ 21.489326] wlx001f1f44c1d2: authenticate with 107F2DDA2284E7ABB8D8BDEF8560C747 [ 21.489335] wlx001f1f44c1d2: send auth to 107F2DDA2284E7ABB8D8BDEF8560C747 (try 1/3) [ 21.496086] wlx001f1f44c1d2: authenticated [ 21.496481] wlx001f1f44c1d2: associate with 107F2DDA2284E7ABB8D8BDEF8560C747 (try 1/3) [ 21.502069] wlx001f1f44c1d2: RX AssocResp from 107F2DDA2284E7ABB8D8BDEF8560C747 (capab=0x411 status=0 aid=2) [ 21.509011] wlx001f1f44c1d2: associated [ 21.638038] IPv6: ADDRCONF(NETDEV_CHANGE): wlx001f1f44c1d2: link becomes ready [ 147.480657] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 147.480662] Bluetooth: BNEP filters: protocol multicast [ 147.480667] Bluetooth: BNEP socket layer initialized [ 151.017781] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 151.017790] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 151.017800] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 151.017803] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 151.017816] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 151.017826] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 151.017828] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 151.017830] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 151.017832] nouveau 0000:01:00.0: msvld: init failed, -19 [ 151.954345] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 151.954356] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 151.954358] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 151.954368] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 151.954374] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 151.954376] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 151.954378] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 151.954379] nouveau 0000:01:00.0: msvld: init failed, -19 [ 154.258300] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 154.258312] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 154.258315] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 154.258324] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 154.258331] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 154.258333] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 154.258335] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 154.258337] nouveau 0000:01:00.0: msvld: init failed, -19 [ 154.671215] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 154.671227] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 154.671230] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 154.671239] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 154.671246] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 154.671248] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 154.671250] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 154.671251] nouveau 0000:01:00.0: msvld: init failed, -19 [ 155.101329] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.101341] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.101344] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 155.101353] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.101360] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.101361] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 155.101363] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 155.101365] nouveau 0000:01:00.0: msvld: init failed, -19 [ 155.588167] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.588178] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.588181] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 155.588190] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.588196] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.588198] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 155.588199] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 155.588201] nouveau 0000:01:00.0: msvld: init failed, -19 [ 155.976844] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.976856] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2) [ 155.976859] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 155.976868] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.976875] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084d (-2) [ 155.976877] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 155.976878] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 155.976880] nouveau 0000:01:00.0: msvld: init failed, -19 [ 323.897089] wlx001f1f44c1d2: deauthenticating from 107F2DDA2284E7ABB8D8BDEF8560C747 by local choice (Reason: 3=DEAUTH_LEAVING)