Probe #ba5e989ad6 of Gigabyte Z270-Gaming K3 Desktop Computer
Log: dmesg.1
[ 5.106646] Linux version 6.12.4-2-cachyos (XXX@XXX) (clang version 18.1.8, LLD 18.1.8) #1 SMP PREEMPT_DYNAMIC Mon, 09 Dec 2024 19:09:07 +0000
[ 5.106683] Command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-cachyos root=UUID=HASH_0EF-F442-89D4-3562-B5716CD14DBF rw rootflags=subvol=@ nowatchdog nvme_load=YES zswap.enabled=0 splash loglevel=3
[ 5.106701] BIOS-provided physical RAM map:
[ 5.106716] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 5.106730] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 5.106745] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 5.106763] BIOS-e820: [mem 0x0000000000100000-0x000000008ed33fff] usable
[ 5.106778] BIOS-e820: [mem 0x000000008ed34000-0x000000008ed34fff] ACPI NVS
[ 5.106792] BIOS-e820: [mem 0x000000008ed35000-0x000000008ed35fff] reserved
[ 5.106806] BIOS-e820: [mem 0x000000008ed36000-0x000000009e0c9fff] usable
[ 5.106821] BIOS-e820: [mem 0x000000009e0ca000-0x000000009e444fff] reserved
[ 5.106837] BIOS-e820: [mem 0x000000009e445000-0x000000009e5befff] usable
[ 5.106851] BIOS-e820: [mem 0x000000009e5bf000-0x000000009eca0fff] ACPI NVS
[ 5.106865] BIOS-e820: [mem 0x000000009eca1000-0x000000009f7fdfff] reserved
[ 5.106884] BIOS-e820: [mem 0x000000009f7fe000-0x000000009f7fefff] usable
[ 5.106898] BIOS-e820: [mem 0x000000009f7ff000-0x000000009fffffff] reserved
[ 5.106912] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 5.106926] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 5.106940] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 5.106954] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 5.106968] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 5.106982] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 5.106998] BIOS-e820: [mem 0x0000000100000000-0x0000000c5effffff] usable
[ 5.107016] NX (Execute Disable) protection: active
[ 5.107031] APIC: Static calls initialized
[ 5.107045] SMBIOS 3.0.0 present.
[ 5.107059] DMI: Gigabyte Technology Co., Ltd. Z270-Gaming K3/Z270-Gaming K3, BIOS F9d 03/09/2018
[ 5.107074] DMI: Memory slots populated: 4/4
[ 5.107088] tsc: Detected 4200.000 MHz processor
[ 5.107102] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 5.107118] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 5.107134] last_pfn = 0xc5f000 max_arch_pfn = 0x400000000
[ 5.107149] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 5.107165] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 5.107182] last_pfn = 0x9f7ff max_arch_pfn = 0x400000000
[ 5.107197] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f] Using GB pages for direct mapping
[ 5.107228] RAMDISK: [mem 0x22e1f000-0x2d706fff] ACPI: Early table checksum verification disabled
[ 5.107259] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 5.107279] ACPI: XSDT 0x000000009E8BF0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 5.107295] ACPI: FACP 0x000000009E8E7CC0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 5.107310] ACPI: DSDT 0x000000009E8BF208 028AB4 (v02 ALASKA A M I 01072009 INTL 20160422)
[ 5.107326] ACPI: FACS 0x000000009EC70C40 000040
[ 5.107341] ACPI: APIC 0x000000009E8E7DD8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 5.107358] ACPI: FPDT 0x000000009E8E7E98 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 5.107374] ACPI: MCFG 0x000000009E8E7EE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 5.107389] ACPI: SSDT 0x000000009E8E7F20 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 5.107404] ACPI: FIDT 0x000000009E8E82E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 5.107420] ACPI: SSDT 0x000000009E8E8380 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 5.107435] ACPI: SSDT 0x000000009E8EB4E0 00255F (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 5.107450] ACPI: HPET 0x000000009E8EDA40 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 5.107466] ACPI: SSDT 0x000000009E8EDA78 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 5.107481] ACPI: SSDT 0x000000009E8EE860 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422)
[ 5.107498] ACPI: UEFI 0x000000009E8F1338 000042 (v01 INTEL EDK2 00000002 01000013)
[ 5.107513] ACPI: SSDT 0x000000009E8F1380 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 5.107528] ACPI: LPIT 0x000000009E8F2260 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 5.107544] ACPI: WSMT 0x000000009E8F22F8 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 5.107559] ACPI: SSDT 0x000000009E8F2320 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 5.107575] ACPI: SSDT 0x000000009E8F25C0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 5.107590] ACPI: DBGP 0x000000009E8F55C8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 5.107605] ACPI: DBG2 0x000000009E8F5600 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 5.107622] ACPI: DMAR 0x000000009E8F5658 000070 (v01 INTEL KBL 00000001 INTL 00000001)
[ 5.107637] ACPI: TPM2 0x000000009E8F56C8 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
[ 5.107653] ACPI: Reserving FACP table memory at [mem 0x9e8e7cc0-0x9e8e7dd3] ACPI: Reserving DSDT table memory at [mem 0x9e8bf208-0x9e8e7cbb] ACPI: Reserving FACS table memory at [mem 0x9ec70c40-0x9ec70c7f] ACPI: Reserving APIC table memory at [mem 0x9e8e7dd8-0x9e8e7e93] ACPI: Reserving FPDT table memory at [mem 0x9e8e7e98-0x9e8e7edb] ACPI: Reserving MCFG table memory at [mem 0x9e8e7ee0-0x9e8e7f1b] ACPI: Reserving SSDT table memory at [mem 0x9e8e7f20-0x9e8e82db] ACPI: Reserving FIDT table memory at [mem 0x9e8e82e0-0x9e8e837b] ACPI: Reserving SSDT table memory at [mem 0x9e8e8380-0x9e8eb4d8] ACPI: Reserving SSDT table memory at [mem 0x9e8eb4e0-0x9e8eda3e] ACPI: Reserving HPET table memory at [mem 0x9e8eda40-0x9e8eda77] ACPI: Reserving SSDT table memory at [mem 0x9e8eda78-0x9e8ee85c] ACPI: Reserving SSDT table memory at [mem 0x9e8ee860-0x9e8f1336] ACPI: Reserving UEFI table memory at [mem 0x9e8f1338-0x9e8f1379] ACPI: Reserving SSDT table memory at [mem 0x9e8f1380-0x9e8f225d] ACPI: Reserving LPIT table memory at [mem 0x9e8f2260-0x9e8f22f3] ACPI: Reserving WSMT table memory at [mem 0x9e8f22f8-0x9e8f231f] ACPI: Reserving SSDT table memory at [mem 0x9e8f2320-0x9e8f25be] ACPI: Reserving SSDT table memory at [mem 0x9e8f25c0-0x9e8f55c1] ACPI: Reserving DBGP table memory at [mem 0x9e8f55c8-0x9e8f55fb] ACPI: Reserving DBG2 table memory at [mem 0x9e8f5600-0x9e8f5653] ACPI: Reserving DMAR table memory at [mem 0x9e8f5658-0x9e8f56c7] ACPI: Reserving TPM2 table memory at [mem 0x9e8f56c8-0x9e8f56fb] No NUMA configuration found
[ 5.108013] Faking a node at [mem 0x0000000000000000-0x0000000c5effffff] NODE_DATA(0) allocated [mem 0xc5efd52c0-0xc5effffff] Zone ranges:
[ 5.108063] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x0000000c5effffff] Device empty
[ 5.108124] Movable zone start for each node
[ 5.108133] Early memory node ranges
[ 5.108145] node 0: [mem 0x0000000000001000-0x000000000009bfff] node 0: [mem 0x0000000000100000-0x000000008ed33fff] node 0: [mem 0x000000008ed36000-0x000000009e0c9fff] node 0: [mem 0x000000009e445000-0x000000009e5befff] node 0: [mem 0x000000009f7fe000-0x000000009f7fefff] node 0: [mem 0x0000000100000000-0x0000000c5effffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c5effffff] On node 0, zone DMA: 1 pages in unavailable ranges
[ 5.108254] On node 0, zone DMA: 100 pages in unavailable ranges
[ 5.108269] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 5.108285] On node 0, zone DMA32: 891 pages in unavailable ranges
[ 5.108300] On node 0, zone DMA32: 4671 pages in unavailable ranges
[ 5.108316] On node 0, zone Normal: 2049 pages in unavailable ranges
[ 5.108331] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 5.108346] ACPI: PM-Timer IO Port: 0x1808
[ 5.108362] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 5.108379] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 5.108394] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 5.108409] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 5.108424] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 5.108436] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 5.108452] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 5.108463] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 5.108473] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 5.108485] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 5.108497] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 5.108509] ACPI: Using ACPI (MADT) for SMP configuration information
[ 5.108520] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 5.108531] TSC deadline timer available
[ 5.108544] CPU topo: Max. logical packages: 1
[ 5.108555] CPU topo: Max. logical dies: 1
[ 5.108566] CPU topo: Max. dies per package: 1
[ 5.108577] CPU topo: Max. threads per core: 2
[ 5.108588] CPU topo: Num. cores per package: 4
[ 5.108599] CPU topo: Num. threads per package: 8
[ 5.108610] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[ 5.108622] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x8ed34000-0x8ed34fff] PM: hibernation: Registered nosave memory: [mem 0x8ed35000-0x8ed35fff] PM: hibernation: Registered nosave memory: [mem 0x9e0ca000-0x9e444fff] PM: hibernation: Registered nosave memory: [mem 0x9e5bf000-0x9eca0fff] PM: hibernation: Registered nosave memory: [mem 0x9eca1000-0x9f7fdfff] PM: hibernation: Registered nosave memory: [mem 0x9f7ff000-0x9fffffff] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xa0000000-0xefffffff] available for PCI devices
[ 5.108888] Booting paravirtualized kernel on bare hardware
[ 5.108900] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 5.108911] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 5.108923] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 5.108934] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 5.108946] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ 5.108958] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-cachyos root=UUID=HASH_0EF-F442-89D4-3562-B5716CD14DBF rw rootflags=subvol=@ nowatchdog nvme_load=YES zswap.enabled=0 splash loglevel=3
[ 5.108970] Unknown kernel command line parameters "splash BOOT_IMAGE=/@/boot/vmlinuz-linux-cachyos nvme_load=YES", will be passed to user space.
[ 5.108981] random: crng init done
[ 5.108993] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ 5.109047] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 5.109061] Fallback order for Node 0: 0
[ 5.109074] Built 1 zonelists, mobility grouping on. Total pages: 12571102
[ 5.109086] Policy zone: Normal
[ 5.109100] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 5.109113] software IO TLB: area num 8.
[ 5.109126] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 5.109139] Kernel/User page tables isolation: enabled
[ 5.109151] ftrace: allocating 49410 entries in 194 pages
[ 5.109164] ftrace: allocated 194 pages with 3 groups
[ 5.109177] BORE (Burst-Oriented Response Enhancer) CPU Scheduler modification 5.7.10 by Masahito Suzuki
[ 5.109189] Dynamic Preempt: full
[ 5.109202] rcu: Preemptible hierarchical RCU implementation.
[ 5.109217] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 5.109229] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 5.109242] Trampoline variant of Tasks RCU enabled.
[ 5.109255] Rude variant of Tasks RCU enabled.
[ 5.109267] Tracing variant of Tasks RCU enabled.
[ 5.109280] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 5.109292] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 5.109303] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 5.109316] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 5.109329] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 5.109343] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 5.109356] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 5.109369] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 5.109381] Console: colour dummy device 80x25
[ 5.109394] printk: legacy console [tty0] enabled
[ 5.109406] ACPI: Core revision 20240827
[ 5.109419] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 5.109432] APIC: Switch to symmetric I/O mode setup
[ 5.109444] DMAR: Host address width 39
[ 5.109458] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 5.109471] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 5.109483] DMAR: RMRR base: 0x0000009e397000 end: 0x0000009e3b6fff
[ 5.109496] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 5.109509] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 5.109522] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 5.109534] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 5.109547] x2apic enabled
[ 5.109559] APIC: Switched APIC routing to: cluster x2apic
[ 5.109574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 5.109587] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
[ 5.109599] Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=4200000)
[ 5.109612] x86/cpu: SGX disabled or unsupported by BIOS.
[ 5.109626] CPU0: Thermal monitoring enabled (TM1)
[ 5.109638] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 5.109651] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 5.109663] process: using mwait in idle threads
[ 5.109676] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 5.109690] Spectre V2 : Mitigation: IBRS
[ 5.109703] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 5.109716] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 5.109728] RETBleed: Mitigation: IBRS
[ 5.109740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 5.109753] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 5.109767] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 5.109779] MDS: Mitigation: Clear CPU buffers
[ 5.109793] TAA: Mitigation: TSX disabled
[ 5.109805] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 5.109818] SRBDS: Mitigation: Microcode
[ 5.109831] GDS: Mitigation: Microcode
[ 5.109844] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 5.109856] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 5.109869] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 5.109881] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 5.109894] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 5.109907] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 5.109921] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 5.109934] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 5.109946] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 5.109957] Freeing SMP alternatives memory: 52K
[ 5.109968] pid_max: default: 32768 minimum: 301
[ 5.109980] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 5.109991] landlock: Up and running.
[ 5.110006] Yama: becoming mindful.
[ 5.110019] LSM support for eBPF active
[ 5.110027] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 5.110034] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 5.110040] smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 5.110046] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 5.110053] ... version: 4
[ 5.110059] ... bit width: 48
[ 5.110065] ... generic registers: 4
[ 5.110071] ... value mask: 0000ffffffffffff
[ 5.110077] ... max period: 00007fffffffffff
[ 5.110085] ... fixed-purpose events: 3
[ 5.110091] ... event mask: 000000070000000f
[ 5.110097] signal: max sigframe size: 2032
[ 5.110103] Estimated ratio of average max frequency by base frequency (times 1024): 1194
[ 5.110109] rcu: Hierarchical SRCU implementation.
[ 5.110116] rcu: Max phase no-delay instances is 400.
[ 5.110123] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 5.110129] smp: Bringing up secondary CPUs ...
[ 5.110135] smpboot: x86: Booting SMP configuration:
[ 5.110143] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 5.110149] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 5.110156] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 5.110162] smp: Brought up 1 node, 8 CPUs
[ 5.110168] smpboot: Total of 8 processors activated (67200.00 BogoMIPS)
[ 5.110174] Memory: 49091680K/50284408K available (20480K kernel code, 2584K rwdata, 14116K rodata, 4184K init, 4336K bss, 1180596K reserved, 0K cma-reserved)
[ 5.110181] le9 Unofficial (le9uo) working set protection 1.8 by Masahito Suzuki (forked from hakavlad's original le9 patch)
[ 5.110187] devtmpfs: initialized
[ 5.110195] x86/mm: Memory block size: 128MB
[ 5.110201] ACPI: PM: Registering ACPI NVS region [mem 0x8ed34000-0x8ed34fff] (4096 bytes)
[ 5.110207] ACPI: PM: Registering ACPI NVS region [mem 0x9e5bf000-0x9eca0fff] (7217152 bytes)
[ 5.110213] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 5.110220] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 5.110226] pinctrl core: initialized pinctrl subsystem
[ 5.110232] PM: RTC time: 16:50:49, date: 2024-12-13
[ 5.110239] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 5.110245] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 5.110252] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 5.110258] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 5.110277] thermal_sys: Registered thermal governor 'fair_share'
[ 5.110283] thermal_sys: Registered thermal governor 'bang_bang'
[ 5.110289] thermal_sys: Registered thermal governor 'step_wise'
[ 5.110295] thermal_sys: Registered thermal governor 'user_space'
[ 5.110301] thermal_sys: Registered thermal governor 'power_allocator'
[ 5.110307] cpuidle: using governor ladder
[ 5.110313] cpuidle: using governor menu
[ 5.110320] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 5.110326] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 5.110332] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f] PCI: Using configuration type 1 for base access
[ 5.110345] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 5.110351] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 5.110357] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 5.110363] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 5.110369] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 5.110375] ACPI: Added _OSI(Module Device)
[ 5.110381] ACPI: Added _OSI(Processor Device)
[ 5.110388] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 5.110393] ACPI: Added _OSI(Processor Aggregator Device)
[ 5.110399] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 5.110405] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 5.110412] ACPI: Dynamic OEM Table Load:
[ 5.110418] ACPI: SSDT 0xFFFF928241736000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 5.110424] ACPI: Dynamic OEM Table Load:
[ 5.110430] ACPI: SSDT 0xFFFF928241744800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 5.110436] ACPI: Interpreter enabled
[ 5.110442] ACPI: PM: (supports S0 S3 S4 S5)
[ 5.110450] ACPI: Using IOAPIC for interrupt routing
[ 5.110456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 5.110463] PCI: Using E820 reservations for host bridge windows
[ 5.110469] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 5.110475] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ 5.110481] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ 5.110488] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ 5.110494] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 5.110500] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 5.110508] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 5.110514] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 5.110520] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 5.110526] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 5.110533] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 5.110539] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 5.110545] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 5.110552] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 5.110559] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 5.110566] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 5.110572] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 5.110578] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 5.110584] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 5.110590] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 5.110597] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 5.110603] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 5.110609] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 5.110617] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 5.110623] ACPI: \_TZ_.FN00: New power resource
[ 5.110629] ACPI: \_TZ_.FN01: New power resource
[ 5.110636] ACPI: \_TZ_.FN02: New power resource
[ 5.110642] ACPI: \_TZ_.FN03: New power resource
[ 5.110648] ACPI: \_TZ_.FN04: New power resource
[ 5.110654] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 5.110791] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 5.111173] PCI host bridge to bus 0000:00
[ 5.111273] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-7e] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000 conventional PCI endpoint
[ 5.112331] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[ 5.112501] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xee000000-0xef0fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 5.113267] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint
[ 5.113409] pci 0000:00:08.0: BAR 0 [mem 0xef42e000-0xef42efff 64bit] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 conventional PCI endpoint
[ 5.113733] pci 0000:00:14.0: BAR 0 [mem 0xef410000-0xef41ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 5.114026] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 conventional PCI endpoint
[ 5.114181] pci 0000:00:16.0: BAR 0 [mem 0xef42d000-0xef42dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot
[ 5.114531] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 conventional PCI endpoint
[ 5.114686] pci 0000:00:17.0: BAR 0 [mem 0xef428000-0xef429fff] pci 0000:00:17.0: BAR 1 [mem 0xef42c000-0xef42c0ff] pci 0000:00:17.0: BAR 2 [io 0xf050-0xf057] pci 0000:00:17.0: BAR 3 [io 0xf040-0xf043] pci 0000:00:17.0: BAR 4 [io 0xf020-0xf03f] pci 0000:00:17.0: BAR 5 [mem 0xef42b000-0xef42b7ff] pci 0000:00:17.0: PME# supported from D3hot
[ 5.115743] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 PCIe Root Port
[ 5.115891] pci 0000:00:1b.0: PCI bridge to [bus 02] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 5.116188] pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400 PCIe Root Port
[ 5.116336] pci 0000:00:1b.2: PCI bridge to [bus 03] pci 0000:00:1b.2: bridge window [mem 0xef300000-0xef3fffff] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[ 5.116770] pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400 PCIe Root Port
[ 5.116922] pci 0000:00:1b.4: PCI bridge to [bus 04] pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1b.4: bridge window [mem 0xec000000-0xed0fffff] pci 0000:00:1b.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 5.117537] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 PCIe Root Port
[ 5.117640] pci 0000:00:1c.0: PCI bridge to [bus 05] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 5.117848] pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400 PCIe Root Port
[ 5.117951] pci 0000:00:1c.2: PCI bridge to [bus 06] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.2: bridge window [mem 0xef200000-0xef2fffff] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 5.118364] pci 0000:00:1c.3: [8086:a293] type 01 class 0x060400 PCIe Root Port
[ 5.118468] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 5.118676] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 PCIe Root Port
[ 5.118777] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 5.118981] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 PCIe Root Port
[ 5.119121] pci 0000:00:1d.0: PCI bridge to [bus 09] pci 0000:00:1d.0: bridge window [mem 0xef100000-0xef1fffff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 5.119429] pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100 conventional PCI endpoint
[ 5.119534] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 conventional PCI endpoint
[ 5.119636] pci 0000:00:1f.2: BAR 0 [mem 0xef424000-0xef427fff] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 conventional PCI endpoint
[ 5.119840] pci 0000:00:1f.3: BAR 0 [mem 0xef420000-0xef423fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0xef400000-0xef40ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 5.120156] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 conventional PCI endpoint
[ 5.120258] pci 0000:00:1f.4: BAR 0 [mem 0xef42a000-0xef42a0ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xf000-0xf01f] pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000 PCIe Legacy Endpoint
[ 5.120569] pci 0000:01:00.0: BAR 0 [mem 0xee000000-0xeeffffff] pci 0000:01:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref] pci 0000:01:00.0: BAR 5 [io 0xe000-0xe07f] pci 0000:01:00.0: ROM [mem 0xef000000-0xef07ffff pref] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 5.121315] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300 PCIe Endpoint
[ 5.121451] pci 0000:01:00.1: BAR 0 [mem 0xef080000-0xef083fff] pci 0000:00:01.0: PCI bridge to [bus 01] acpiphp: Slot [1] registered
[ 5.121676] pci 0000:00:1b.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b21:2142] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 5.121890] pci 0000:03:00.0: BAR 0 [mem 0xef300000-0xef307fff 64bit] pci 0000:03:00.0: enabling Extended Tags
[ 5.122131] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 5.122233] pci 0000:00:1b.2: PCI bridge to [bus 03] pci 0000:04:00.0: [10de:1380] type 00 class 0x030000 PCIe Legacy Endpoint
[ 5.122449] pci 0000:04:00.0: BAR 0 [mem 0xec000000-0xecffffff] pci 0000:04:00.0: BAR 1 [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:04:00.0: BAR 3 [mem 0xc0000000-0xc1ffffff 64bit pref] pci 0000:04:00.0: BAR 5 [io 0xd000-0xd07f] pci 0000:04:00.0: ROM [mem 0xed000000-0xed07ffff pref] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1b.4 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 5.123096] pci 0000:04:00.1: [10de:0fbc] type 00 class 0x040300 PCIe Endpoint
[ 5.123204] pci 0000:04:00.1: BAR 0 [mem 0xed080000-0xed083fff] pci 0000:00:1b.4: PCI bridge to [bus 04] acpiphp: Slot [1-1] registered
[ 5.123416] pci 0000:00:1c.0: PCI bridge to [bus 05] pci 0000:06:00.0: [1969:e0b1] type 00 class 0x020000 PCIe Endpoint
[ 5.123628] pci 0000:06:00.0: BAR 0 [mem 0xef200000-0xef23ffff 64bit] pci 0000:06:00.0: BAR 2 [io 0xc000-0xc07f] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 5.123940] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.124060] pci 0000:00:1c.2: PCI bridge to [bus 06] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:09:00.0: [025e:f1ac] type 00 class 0x010802 PCIe Endpoint
[ 5.124494] pci 0000:09:00.0: BAR 0 [mem 0xef100000-0xef103fff 64bit] pci 0000:09:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:1d.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[ 5.124707] pci 0000:00:1d.0: PCI bridge to [bus 09] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 5.124723] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 5.124729] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 5.124735] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 5.124741] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 5.124747] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 5.124753] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 5.124760] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 5.124767] iommu: Default domain type: Translated
[ 5.124774] iommu: DMA domain TLB invalidation policy: lazy mode
[ 5.124780] SCSI subsystem initialized
[ 5.124785] libata version 3.00 loaded.
[ 5.124791] ACPI: bus type USB registered
[ 5.124797] usbcore: registered new interface driver usbfs
[ 5.124803] usbcore: registered new interface driver hub
[ 5.124809] usbcore: registered new device driver usb
[ 5.124814] EDAC MC: Ver: 3.0.0
[ 5.124820] NetLabel: Initializing
[ 5.124826] NetLabel: domain hash size = 128
[ 5.124831] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 5.124837] NetLabel: unlabeled traffic allowed by default
[ 5.124843] mctp: management component transport protocol core
[ 5.124849] NET: Registered PF_MCTP protocol family
[ 5.124856] PCI: Using ACPI for IRQ routing
[ 5.124862] PCI: pci_cache_line_size set to 64 bytes
[ 5.124868] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] e820: reserve RAM buffer [mem 0x8ed34000-0x8fffffff] e820: reserve RAM buffer [mem 0x9e0ca000-0x9fffffff] e820: reserve RAM buffer [mem 0x9e5bf000-0x9fffffff] e820: reserve RAM buffer [mem 0x9f7ff000-0x9fffffff] e820: reserve RAM buffer [mem 0xc5f000000-0xc5fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 5.125118] pci 0000:01:00.0: vgaarb: bridge control possible
[ 5.125261] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 5.125373] pci 0000:04:00.0: vgaarb: bridge control possible
[ 5.125479] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 5.125487] vgaarb: loaded
[ 5.125494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 5.125500] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 5.125507] clocksource: Switched to clocksource tsc-early
[ 5.125513] VFS: Disk quotas dquot_6.6.0
[ 5.125520] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.125526] pnp: PnP ACPI init
[ 5.125628] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 5.125728] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 5.125862] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 5.126016] system 00:01: [io 0x0680-0x069f] has been reserved
[ 5.126163] system 00:01: [io 0xffff] has been reserved
[ 5.126311] system 00:01: [io 0xffff] has been reserved
[ 5.126477] system 00:01: [io 0xffff] has been reserved
[ 5.126627] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 5.126791] system 00:01: [io 0x164e-0x164f] has been reserved
[ 5.126950] system 00:02: [io 0x0800-0x087f] has been reserved
[ 5.127102] system 00:04: [io 0x1854-0x1857] has been reserved
[ 5.127251] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 5.127384] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 5.127513] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 5.127663] system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 5.127802] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 5.127929] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 5.128080] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 5.128228] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 5.128376] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 5.128523] system 00:05: [mem 0xeffe0000-0xefffffff] has been reserved
[ 5.128670] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 5.128818] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 5.128963] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 5.129111] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 5.129257] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 5.129403] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 5.129550] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 5.129696] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 5.129847] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 5.129995] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 5.130145] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 5.130164] pnp: PnP ACPI: found 9 devices
[ 5.130176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 5.130190] NET: Registered PF_INET protocol family
[ 5.130202] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 5.130216] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 5.130232] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 5.130244] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 5.130257] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 5.130268] TCP: Hash tables configured (established 524288 bind 65536)
[ 5.130278] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[ 5.130290] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 5.130302] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 5.130317] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 5.130331] NET: Registered PF_XDP protocol family
[ 5.130488] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xee000000-0xef0fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] pci 0000:00:1b.0: PCI bridge to [bus 02] pci 0000:00:1b.2: PCI bridge to [bus 03] pci 0000:00:1b.2: bridge window [mem 0xef300000-0xef3fffff] pci 0000:00:1b.4: PCI bridge to [bus 04] pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1b.4: bridge window [mem 0xec000000-0xed0fffff] pci 0000:00:1b.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 05] pci 0000:00:1c.2: PCI bridge to [bus 06] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.2: bridge window [mem 0xef200000-0xef2fffff] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1d.0: PCI bridge to [bus 09] pci 0000:00:1d.0: bridge window [mem 0xef100000-0xef1fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xee000000-0xef0fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xef300000-0xef3fffff] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xec000000-0xed0fffff] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] pci_bus 0000:06: resource 1 [mem 0xef200000-0xef2fffff] pci_bus 0000:09: resource 1 [mem 0xef100000-0xef1fffff] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 5.135910] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 5.136074] pci 0000:03:00.0: PME# does not work under D0, disabling it
[ 5.136240] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[ 5.136405] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[ 5.136423] PCI: CLS 64 bytes, default 64
[ 5.136514] pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000 conventional PCI endpoint
[ 5.136601] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.136625] software IO TLB: mapped [mem 0x000000009a0ca000-0x000000009e0ca000] (64MB)
[ 5.136636] Trying to unpack rootfs image as initramfs...
[ 5.136646] Initialise system trusted keyrings
[ 5.136657] Key type blacklist registered
[ 5.136668] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[ 5.136678] fuse: init (API version 7.41)
[ 5.136689] integrity: Platform Keyring initialized
[ 5.136701] integrity: Machine keyring initialized
[ 5.136711] Key type asymmetric registered
[ 5.136722] Asymmetric key parser 'x509' registered
[ 5.136733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 5.136743] io scheduler mq-deadline registered
[ 5.136754] io scheduler kyber registered
[ 5.136764] io scheduler bfq registered
[ 5.136775] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.136787] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.136797] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 5.136808] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.136829] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.136850] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.137019] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 5.137168] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.137182] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 5.137193] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.137203] Non-volatile memory driver v1.3
[ 5.137214] Linux agpgart interface v0.103
[ 5.137361] ahci 0000:00:17.0: version 3.0
[ 5.137375] Freeing initrd memory: 172960K
[ 5.137518] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 5.137663] ahci 0000:00:17.0: 1/6 ports implemented (port mask 0x4)
[ 5.137806] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 5.137955] scsi host0: ahci
[ 5.138109] scsi host1: ahci
[ 5.138253] scsi host2: ahci
[ 5.138394] scsi host3: ahci
[ 5.138536] scsi host4: ahci
[ 5.138679] scsi host5: ahci
[ 5.138693] ata1: DUMMY
[ 5.138704] ata2: DUMMY
[ 5.138715] ata3: SATA max UDMA/133 abar m2048@0xef42b000 port 0xef42b200 irq 33 lpm-pol 3
[ 5.138726] ata4: DUMMY
[ 5.138736] ata5: DUMMY
[ 5.138746] ata6: DUMMY
[ 5.138756] ACPI: bus type drm_connector registered
[ 5.138896] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.139042] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.139182] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 5.139322] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.139460] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.139598] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 5.139706] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 5.139813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 5.139918] usb usb1: Product: xHCI Host Controller
[ 5.140024] usb usb1: Manufacturer: Linux 6.12.4-2-cachyos xhci-hcd
[ 5.140134] usb usb1: SerialNumber: ...
[ 5.140296] hub 1-0:1.0: USB hub found
[ 5.140452] hub 1-0:1.0: 16 ports detected
[ 5.140561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 5.140664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 5.140762] usb usb2: Product: xHCI Host Controller
[ 5.140860] usb usb2: Manufacturer: Linux 6.12.4-2-cachyos xhci-hcd
[ 5.140957] usb usb2: SerialNumber: ...
[ 5.141107] hub 2-0:1.0: USB hub found
[ 5.141252] hub 2-0:1.0: 10 ports detected
[ 5.141394] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 5.141534] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 5.141703] xhci_hcd 0000:03:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[ 5.141855] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 5.141988] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 5.142114] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 5.142198] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 5.142277] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 5.142354] usb usb3: Product: xHCI Host Controller
[ 5.142433] usb usb3: Manufacturer: Linux 6.12.4-2-cachyos xhci-hcd
[ 5.142508] usb usb3: SerialNumber: ...
[ 5.142623] hub 3-0:1.0: USB hub found
[ 5.142735] hub 3-0:1.0: 2 ports detected
[ 5.142849] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.142927] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 5.143006] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 5.143084] usb usb4: Product: xHCI Host Controller
[ 5.143159] usb usb4: Manufacturer: Linux 6.12.4-2-cachyos xhci-hcd
[ 5.143233] usb usb4: SerialNumber: ...
[ 5.143346] hub 4-0:1.0: USB hub found
[ 5.143458] hub 4-0:1.0: 2 ports detected
[ 5.143467] usbcore: registered new interface driver usbserial_generic
[ 5.143474] usbserial: USB Serial support registered for generic
[ 5.143573] rtc_cmos 00:03: RTC can wake from S4
[ 5.143673] rtc_cmos 00:03: registered as rtc0
[ 5.143770] rtc_cmos 00:03: setting system clock to 2024-12-13T16:50:49 UTC (1734108649)
[ 5.143882] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 5.143900] intel_pstate: Intel P-state driver initializing
[ 5.143914] intel_pstate: Disabling energy efficiency optimization
[ 5.143928] intel_pstate: HWP enabled
[ 5.143943] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 5.143960] vesafb: scrolling: redraw
[ 5.143981] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.143995] vesafb: framebuffer at 0xe1000000, mapped to 0x0000000082e9d893, using 1216k, total 1216k
[ 5.144013] fbcon: Deferring console take-over
[ 5.144026] fb0: VESA VGA frame buffer device
[ 5.144041] hid: raw HID events driver (C) Jiri Kosina
[ 5.144057] drop_monitor: Initializing network drop monitor service
[ 5.144072] NET: Registered PF_INET6 protocol family
[ 5.144088] Segment Routing with IPv6
[ 5.144104] RPL Segment Routing with IPv6
[ 5.144119] In-situ OAM (IOAM) with IPv6
[ 5.144138] NET: Registered PF_PACKET protocol family
[ 5.144154] microcode: Current revision: 0x000000f8
[ 5.144170] microcode: Updated early from: 0x00000084
[ 5.144184] IPI shorthand broadcast: enabled
[ 5.144195] sched_clock: Marking stable (488000947, 320636)->(577341744, -89020161)
[ 5.144208] registered taskstats version 1
[ 5.144224] Loading compiled-in X.509 certificates
[ 5.144240] Loaded X.509 cert 'Build time autogenerated kernel key: 03c4207070225877f67617e8f27a4f86804eb916'
[ 5.144256] Demotion targets for Node 0: null
[ 5.144273] Key type .fscrypt registered
[ 5.144290] Key type fscrypt-provisioning registered
[ 5.144305] PM: Magic number: 4:499:843
[ 5.144322] RAS: Correctable Errors collector initialized.
[ 5.144336] clk: Disabling unused clocks
[ 5.144352] PM: genpd: Disabling unused power domains
[ 5.144557] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 5.144581] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.144598] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20240827/psargs-332)
[ 5.144616] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20240827/psparse-531)
[ 5.144631] ata3.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[ 5.144647] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 5.144660] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20240827/psargs-332)
[ 5.144672] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20240827/psparse-531)
[ 5.144685] ata3.00: configured for UDMA/133
[ 5.144869] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
[ 5.145060] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 5.145226] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 5.145402] sd 2:0:0:0: [sda] Write Protect is off
[ 5.145559] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.145714] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.145868] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 5.146059] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 5.146204] usb 1-3: New USB device found, idVendor=194f, idProduct=0403, bcdDevice= 1.21
[ 5.146339] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.146477] usb 1-3: Product: PreSonus AudioBox iTwo
[ 5.146584] usb 1-3: Manufacturer: PreSonus
[ 5.146681] usb 1-3: SerialNumber: ...
[ 5.146698] sda: sda1 sda2
[ 5.146832] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.146847] Freeing unused decrypted memory: 2028K
[ 5.146860] Freeing unused kernel image (initmem) memory: 4184K
[ 5.146872] Write protecting the kernel read-only data: 34816k
[ 5.146883] Freeing unused kernel image (rodata/data gap) memory: 220K
[ 5.146895] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.146907] rodata_test: all tests were successful
[ 5.146918] x86/mm: Checking user space page tables
[ 5.146929] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.146940] Run /init as init process
[ 5.146952] with arguments:
[ 5.146964] /init
[ 5.146975] splash
[ 5.146986] with environment:
[ 5.146997] HOME=/
[ 5.147026] TERM=linux
[ 5.147033] BOOT_IMAGE=/@/boot/vmlinuz-linux-cachyos
[ 5.147045] nvme_load=YES
[ 5.147238] usb 1-12: new full-speed USB device number 3 using xhci_hcd
[ 5.147254] fbcon: Taking over console
[ 5.147261] Console: switching to colour frame buffer device 80x30
[ 5.147369] usb 1-12: New USB device found, idVendor=2433, idProduct=b200, bcdDevice= 1.00
[ 5.147468] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.147564] usb 1-12: Product: 690LC
[ 5.147660] usb 1-12: Manufacturer: ASETEK
[ 5.147755] usb 1-12: SerialNumber: ...
[ 5.147771] nvidia: loading out-of-tree module taints kernel.
[ 5.147783] nvidia: module license 'NVIDIA' taints kernel.
[ 5.147796] Disabling lock debugging due to kernel taint
[ 5.147809] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 5.147824] nvidia: module license taints kernel.
[ 5.148018] usb 3-1: not running at top speed; connect to a high speed hub
[ 5.148128] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=71.60
[ 5.148228] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.148326] usb 3-1: Product: USB2.1 Hub
[ 5.148427] usb 3-1: Manufacturer: GenesysLogic
[ 5.148572] hub 3-1:1.0: USB hub found
[ 5.148712] hub 3-1:1.0: 2 ports detected
[ 5.148853] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 5.148869] tsc: Refined TSC clocksource calibration: 4199.986 MHz
[ 5.148881] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a53e723d, max_idle_ns: 440795378611 ns
[ 5.148892] clocksource: Switched to clocksource tsc
[ 5.148904] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 5.148917]
[ 5.149058] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.149160] usb 3-2: New USB device found, idVendor=31e3, idProduct=1402, bcdDevice= 2.30
[ 5.149260] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.149358] usb 3-2: Product: Wooting 80HE
[ 5.149456] usb 3-2: Manufacturer: Wooting
[ 5.149581] usb 3-2: SerialNumber: ...
[ 5.149768] usb 3-1.2: new full-speed USB device number 4 using xhci_hcd
[ 5.149787] usbcore: registered new interface driver usbhid
[ 5.149799] usbhid: USB HID core driver
[ 5.149945] hid-generic 0003:31E3:1402.0001: hiddev96,hidraw0: USB HID v1.11 Device [Wooting Wooting 80HE] on usb-0000:03:00.0-2/input0
[ 5.149961] input: Wooting Wooting 80HE as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-2/3-2:1.1/0003:31E3:1402.0002/input/input3
[ 5.150082] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 5.150189] nvidia 0000:04:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 5.150380] hid-generic 0003:31E3:1402.0002: input,hidraw1: USB HID v1.11 Keyboard [Wooting Wooting 80HE] on usb-0000:03:00.0-2/input1
[ 5.150540] hid-generic 0003:31E3:1402.0003: hiddev97,hidraw2: USB HID v1.11 Device [Wooting Wooting 80HE] on usb-0000:03:00.0-2/input2
[ 5.150555] input: Wooting Wooting 80HE System Control as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-2/3-2:1.3/0003:31E3:1402.0004/input/input4
[ 5.150567] input: Wooting Wooting 80HE Consumer Control as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-2/3-2:1.3/0003:31E3:1402.0004/input/input5
[ 5.150579] input: Wooting Wooting 80HE Mouse as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-2/3-2:1.3/0003:31E3:1402.0004/input/input6
[ 5.150719] hid-generic 0003:31E3:1402.0004: input,hidraw3: USB HID v1.11 Mouse [Wooting Wooting 80HE] on usb-0000:03:00.0-2/input3
[ 5.150862] hid-generic 0003:31E3:1402.0005: hiddev98,hidraw4: USB HID v1.11 Device [Wooting Wooting 80HE] on usb-0000:03:00.0-2/input4
[ 5.150879] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 565.77 Wed Nov 27 23:33:08 UTC 2024
[ 5.151037] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQAA data block query control method not found
[ 5.151059] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 565.77 Wed Nov 27 22:53:48 UTC 2024
[ 5.151180] usb 3-1.2: New USB device found, idVendor=1532, idProduct=007e, bcdDevice= 2.00
[ 5.151268] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.151352] usb 3-1.2: Product: Razer Mouse Dock
[ 5.151435] usb 3-1.2: Manufacturer: RAZER
[ 5.151445] input: RAZER Razer Mouse Dock as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1532:007E.0006/input/input7
[ 5.151570] hid-generic 0003:1532:007E.0006: input,hidraw5: USB HID v1.11 Mouse [RAZER Razer Mouse Dock] on usb-0000:03:00.0-1.2/input0
[ 5.151579] input: RAZER Razer Mouse Dock Keyboard as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1532:007E.0007/input/input8
[ 5.151586] nvidia_uvm: module uses symbols nvUvmInterfaceQueryCaps from proprietary module nvidia, inheriting taint.
[ 5.151593] input: RAZER Razer Mouse Dock as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1532:007E.0007/input/input9
[ 5.151767] hid-generic 0003:1532:007E.0007: input,hidraw6: USB HID v1.11 Keyboard [RAZER Razer Mouse Dock] on usb-0000:03:00.0-1.2/input1
[ 5.151792] input: RAZER Razer Mouse Dock as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:1532:007E.0008/input/input10
[ 5.151805] nvidia-uvm: Loaded the UVM driver, major device number 238.
[ 5.151819] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 5.151973] hid-generic 0003:1532:007E.0008: input,hidraw7: USB HID v1.11 Keyboard [RAZER Razer Mouse Dock] on usb-0000:03:00.0-1.2/input2
[ 5.152109] usb 3-1.1: new full-speed USB device number 5 using xhci_hcd
[ 5.152198] usb 3-1.1: New USB device found, idVendor=1532, idProduct=00b7, bcdDevice= 1.00
[ 5.152285] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.152390] usb 3-1.1: Product: Razer DeathAdder V3 Pro
[ 5.152532] usb 3-1.1: Manufacturer: Razer
[ 5.152643] usb 3-1.1: SerialNumber: ...
[ 5.152659] input: Razer Razer DeathAdder V3 Pro as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:1532:00B7.0009/input/input11
[ 5.152805] hid-generic 0003:1532:00B7.0009: input,hidraw8: USB HID v1.11 Mouse [Razer Razer DeathAdder V3 Pro] on usb-0000:03:00.0-1.1/input0
[ 5.152820] input: Razer Razer DeathAdder V3 Pro Keyboard as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:1532:00B7.000A/input/input12
[ 5.152832] input: Razer Razer DeathAdder V3 Pro Mouse as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:1532:00B7.000A/input/input13
[ 5.152846] input: Razer Razer DeathAdder V3 Pro as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:1532:00B7.000A/input/input14
[ 5.152990] hid-generic 0003:1532:00B7.000A: input,hidraw9: USB HID v1.11 Keyboard [Razer Razer DeathAdder V3 Pro] on usb-0000:03:00.0-1.1/input1
[ 5.153021] input: Razer Razer DeathAdder V3 Pro as /devices/pci0000:00/0000:00:1b.2/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:1532:00B7.000B/input/input15
[ 5.153034] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 0
[ 5.153044] Console: switching to colour dummy device 80x25
[ 5.153216] nvidia 0000:01:00.0: vgaarb: deactivate vga console
[ 5.153233] fbcon: nvidia-drmdrmfb (fb0) is primary device
[ 5.153388] hid-generic 0003:1532:00B7.000B: input,hidraw10: USB HID v1.11 Keyboard [Razer Razer DeathAdder V3 Pro] on usb-0000:03:00.0-1.1/input2
[ 5.153403] Console: switching to colour frame buffer device 240x75
[ 5.153530] nvidia 0000:01:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
[ 5.153546] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[ 5.153557] [drm] Initialized nvidia-drm 0.0.0 for 0000:04:00.0 on minor 1
[ 5.153682] nvidia 0000:04:00.0: [drm] Cannot find any crtc or sizes
[ 5.153778] nvme nvme0: pci function 0000:09:00.0
[ 5.153906] nvme nvme0: 8/0/0 default/read/poll queues
[ 5.153927] nvme0n1: p1
[ 5.153944] xor: automatically using best checksumming function avx
[ 5.153959] raid6: skipped pq benchmark and selected avx2x4
[ 5.153969] raid6: using avx2x2 recovery algorithm
[ 5.153983] Btrfs loaded, zoned=yes, fsverity=yes
[ 5.153997] BTRFS: device fsid HASH_0EF-F442-89D4-3562-B5716CD14DBF devid 1 transid 509 /dev/nvme0n1p1 (259:1) scanned by mount (276)
[ 5.154015] BTRFS info (device nvme0n1p1): first mount of filesystem HASH_0EF-F442-89D4-3562-B5716CD14DBF
[ 5.154034] BTRFS info (device nvme0n1p1): using crc32c (crc32c-intel) checksum algorithm
[ 5.154048] BTRFS info (device nvme0n1p1): using free-space-tree
[ 5.154125] zram: Added device: zram0
[ 5.154878] loop: module loaded
[ 5.155013] device-mapper: uevent: version 1.0.3
[ 5.155025] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX
[ 5.155230] i2c_dev: i2c /dev entries driver
[ 5.155243] BTRFS info (device nvme0n1p1 state M): use zstd compression, level 3
[ 5.155254] Asymmetric key parser 'pkcs8' registered
[ 5.310026] zram0: detected capacity change from 0 to 98566144
[ 5.358011] mousedev: PS/2 mouse device common for all mice
[ 5.364019] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff] caller get_primary_reg_base+0x73/0xb0 [intel_pmc_core] mapping multiple BARs
[ 5.364068] intel_pmc_core INT33A1:00: initialized
[ 5.415011] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.430205] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 5.430222] mc: Linux media interface: v0.10
[ 5.445010] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.459068] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.459275] i2c i2c-12: Successfully instantiated SPD at 0x50
[ 5.459445] i2c i2c-12: Successfully instantiated SPD at 0x51
[ 5.459584] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [2BE7F8111E51C5CA945B4F75F3DF4B16] i2c i2c-12: Successfully instantiated SPD at 0x52
[ 5.459925] i2c i2c-12: Successfully instantiated SPD at 0x53
[ 5.487011] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.487047] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.487061] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.487073] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.505017] cryptd: max_cpu_qlen set to 1000
[ 5.524010] alx 0000:06:00.0 enp6s0: renamed from eth0
[ 5.529269] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.531512] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.532069] snd_hda_intel 0000:04:00.1: Disabling MSI
[ 5.532500] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 5.532992] AES CTR mode by8 optimization enabled
[ 5.536010] Adding 49283068k swap on /dev/zram0. Priority:100 extents:1 across:49283068k SSDsc
[ 5.538032] ee1004 12-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.540017] ee1004 12-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.541007] usb 1-3: Quirk or no altset; falling back to MIDI 1.0
[ 5.541562] usbcore: registered new interface driver snd-usb-audio
[ 5.542054] ee1004 12-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.544032] ee1004 12-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.560013] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.573236] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.573764] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.574224] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.574407] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 5.574570] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.574733] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.574893] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.575101] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.575265] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 5.575285] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input21
[ 5.575307] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 5.575326] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input22
[ 5.575346] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 5.575365] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input23
[ 5.575383] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input24
[ 5.575403] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 5.575429] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 5.575449] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 5.575468] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 5.575487] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 5.575505] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 5.575524] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 5.575542] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 5.575563] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 5.643009] intel_tcc_cooling: Programmable TCC Offset detected
[ 5.688008] intel_rapl_common: Found RAPL domain package
[ 5.688042] intel_rapl_common: Found RAPL domain core
[ 5.688057] intel_rapl_common: Found RAPL domain dram
[ 6.199042] zswap: loaded using pool zstd/zsmalloc
[ 8.170023] alx 0000:06:00.0 enp6s0: NIC Up: 1 Gbps Full
[ 15.870034] block nvme0n1: No UUID available providing old NGUID
[ 1894.054243] traps: electron[1102] trap int3 ip:5b0d846ffa7f sp:7ffed2ea63e0 error:0 in electron[59b1a7f,5b0d803e8000+9110000]