[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 6.1.0-28-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.119-1 (2024-11-22) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64 root=UUID=HASH_C64-A4C1-7905-52C8-446D4DA6E1D8 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c9c85fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9c86000-0x00000000c9c8cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c9c8d000-0x00000000ca59cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca59d000-0x00000000ca80ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca810000-0x00000000da765fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da766000-0x00000000da7fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da7fe000-0x00000000da83afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da83b000-0x00000000da902fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da903000-0x00000000daf8afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daf8b000-0x00000000daffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xda8cf000 ACPI 2.0=0xda8cf000 SMBIOS=0xf04c0 MOKvar=0xdad75000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B85M-D3H/B85M-D3H, BIOS F15 08/20/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3392.370 MHz processor [ 0.000647] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000650] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000657] last_pfn = 0x81e600 max_arch_pfn = 0x400000000 [ 0.000742] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001139] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.001143] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.007330] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] Using GB pages for direct mapping [ 0.007880] RAMDISK: [mem 0x30bc7000-0x345dafff] ACPI: Early table checksum verification disabled [ 0.007886] ACPI: RSDP 0x00000000DA8CF000 000024 (v02 ALASKA) [ 0.007889] ACPI: XSDT 0x00000000DA8CF078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007893] ACPI: FACP 0x00000000DA8DBE18 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.007896] ACPI: DSDT 0x00000000DA8CF188 00CC8D (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.007899] ACPI: FACS 0x00000000DA901080 000040 [ 0.007900] ACPI: APIC 0x00000000DA8DBF28 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.007903] ACPI: FPDT 0x00000000DA8DBFC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007905] ACPI: SSDT 0x00000000DA8DC008 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.007907] ACPI: SSDT 0x00000000DA8DC548 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.007909] ACPI: MCFG 0x00000000DA8DD020 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.007911] ACPI: HPET 0x00000000DA8DD060 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.007913] ACPI: SSDT 0x00000000DA8DD098 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.007915] ACPI: SSDT 0x00000000DA8DD408 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.007917] ACPI: DMAR 0x00000000DA8E08F0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.007919] ACPI: Reserving FACP table memory at [mem 0xda8dbe18-0xda8dbf23] ACPI: Reserving DSDT table memory at [mem 0xda8cf188-0xda8dbe14] ACPI: Reserving FACS table memory at [mem 0xda901080-0xda9010bf] ACPI: Reserving APIC table memory at [mem 0xda8dbf28-0xda8dbfb9] ACPI: Reserving FPDT table memory at [mem 0xda8dbfc0-0xda8dc003] ACPI: Reserving SSDT table memory at [mem 0xda8dc008-0xda8dc540] ACPI: Reserving SSDT table memory at [mem 0xda8dc548-0xda8dd01f] ACPI: Reserving MCFG table memory at [mem 0xda8dd020-0xda8dd05b] ACPI: Reserving HPET table memory at [mem 0xda8dd060-0xda8dd097] ACPI: Reserving SSDT table memory at [mem 0xda8dd098-0xda8dd404] ACPI: Reserving SSDT table memory at [mem 0xda8dd408-0xda8e08e8] ACPI: Reserving DMAR table memory at [mem 0xda8e08f0-0xda8e09a7] No NUMA configuration found [ 0.007976] Faking a node at [mem 0x0000000000000000-0x000000081e5fffff] NODE_DATA(0) allocated [mem 0x81e5d5000-0x81e5fffff] Zone ranges: [ 0.008184] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000081e5fffff] Device empty [ 0.008188] Movable zone start for each node [ 0.008190] Early memory node ranges [ 0.008190] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000c9c85fff] node 0: [mem 0x00000000c9c8d000-0x00000000ca59cfff] node 0: [mem 0x00000000ca810000-0x00000000da765fff] node 0: [mem 0x00000000da7fe000-0x00000000da83afff] node 0: [mem 0x00000000dafff000-0x00000000daffffff] node 0: [mem 0x0000000100000000-0x000000081e5fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000081e5fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008203] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008231] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.013945] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.014411] On node 0, zone DMA32: 627 pages in unavailable ranges [ 0.014414] On node 0, zone DMA32: 152 pages in unavailable ranges [ 0.014435] On node 0, zone DMA32: 1988 pages in unavailable ranges [ 0.014866] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.014929] On node 0, zone Normal: 6656 pages in unavailable ranges [ 0.014934] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.015011] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.015020] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.015022] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.015024] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.015027] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.015028] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.015032] TSC deadline timer available [ 0.015033] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.015053] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xc9c86000-0xc9c8cfff] PM: hibernation: Registered nosave memory: [mem 0xca59d000-0xca80ffff] PM: hibernation: Registered nosave memory: [mem 0xda766000-0xda7fdfff] PM: hibernation: Registered nosave memory: [mem 0xda83b000-0xda902fff] PM: hibernation: Registered nosave memory: [mem 0xda903000-0xdaf8afff] PM: hibernation: Registered nosave memory: [mem 0xdaf8b000-0xdaffefff] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.015075] Booting paravirtualized kernel on bare hardware [ 0.015077] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.018529] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.018709] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.018715] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.018717] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.018744] Fallback order for Node 0: 0 [ 0.018746] Built 1 zonelists, mobility grouping on. Total pages: 8227837 [ 0.018747] Policy zone: Normal [ 0.018748] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64 root=UUID=HASH_C64-A4C1-7905-52C8-446D4DA6E1D8 ro quiet [ 0.018781] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64", will be passed to user space. [ 0.018796] random: crng init done [ 0.020126] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.020809] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.020874] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.020881] software IO TLB: area num 8. [ 0.047070] Memory: 3379256K/33434396K available (14342K kernel code, 2335K rwdata, 9080K rodata, 2800K init, 17392K bss, 957900K reserved, 0K cma-reserved) [ 0.047180] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.047191] Kernel/User page tables isolation: enabled [ 0.047217] ftrace: allocating 40283 entries in 158 pages [ 0.052591] ftrace: allocated 158 pages with 5 groups [ 0.053069] Dynamic Preempt: voluntary [ 0.053094] rcu: Preemptible hierarchical RCU implementation. [ 0.053095] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.053096] Trampoline variant of Tasks RCU enabled. [ 0.053096] Rude variant of Tasks RCU enabled. [ 0.053097] Tracing variant of Tasks RCU enabled. [ 0.053097] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.053098] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.056447] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.056608] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.056665] Console: colour dummy device 80x25 [ 0.056679] printk: console [tty0] enabled [ 0.056692] ACPI: Core revision 20220331 [ 0.056761] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.056770] APIC: Switch to symmetric I/O mode setup [ 0.056771] DMAR: Host address width 39 [ 0.056772] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.056776] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.056778] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.056780] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.056782] DMAR: RMRR base: 0x000000daecf000 end: 0x000000daeddfff [ 0.056783] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.056785] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.056786] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.056787] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.057237] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.057239] x2apic enabled [ 0.057243] Switched APIC routing to cluster x2apic. [ 0.057630] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076770] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e6268cfbd, max_idle_ns: 440795227388 ns [ 0.076773] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.74 BogoMIPS (lpj=13569480) [ 0.076792] CPU0: Thermal monitoring enabled (TM1) [ 0.076817] process: using mwait in idle threads [ 0.076818] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.076819] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.076822] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.076823] Spectre V2 : Mitigation: Retpolines [ 0.076824] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.076824] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.076825] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.076826] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.076827] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.076827] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.076829] MDS: Mitigation: Clear CPU buffers [ 0.076829] MMIO Stale Data: Unknown: No mitigations [ 0.076830] SRBDS: Mitigation: Microcode [ 0.076834] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.076835] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.076835] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.076836] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.076837] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.086914] Freeing SMP alternatives memory: 36K [ 0.086915] pid_max: default: 32768 minimum: 301 [ 0.091021] LSM: Security Framework initializing [ 0.091033] landlock: Up and running. [ 0.091034] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.091049] AppArmor: AppArmor initialized [ 0.091051] TOMOYO Linux initialized [ 0.091055] LSM support for eBPF active [ 0.091091] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.091116] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.091643] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.091719] cblist_init_generic: Setting adjustable number of callback queues. [ 0.091720] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.091732] cblist_init_generic: Setting adjustable number of callback queues. [ 0.091732] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.091740] cblist_init_generic: Setting adjustable number of callback queues. [ 0.091741] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.091749] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.091778] ... version: 3 [ 0.091778] ... bit width: 48 [ 0.091779] ... generic registers: 4 [ 0.091779] ... value mask: 0000ffffffffffff [ 0.091780] ... max period: 00007fffffffffff [ 0.091781] ... fixed-purpose events: 3 [ 0.091781] ... event mask: 000000070000000f [ 0.091879] signal: max sigframe size: 1776 [ 0.091890] Estimated ratio of average max frequency by base frequency (times 1024): 1084 [ 0.091903] rcu: Hierarchical SRCU implementation. [ 0.091903] rcu: Max phase no-delay instances is 1000. [ 0.092415] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.092469] smp: Bringing up secondary CPUs ... [ 0.092525] x86: Booting SMP configuration: [ 0.092526] .... node #0, CPUs: #1 #2 #3 #4 [ 0.094256] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.094256] #5 #6 #7 [ 0.097008] smp: Brought up 1 node, 8 CPUs [ 0.097008] smpboot: Max logical packages: 1 [ 0.097008] smpboot: Total of 8 processors activated (54277.92 BogoMIPS) [ 0.145214] node 0 deferred pages initialised in 48ms [ 0.145593] devtmpfs: initialized [ 0.145593] x86/mm: Memory block size: 128MB [ 0.146427] ACPI: PM: Registering ACPI NVS region [mem 0xc9c86000-0xc9c8cfff] (28672 bytes) [ 0.146427] ACPI: PM: Registering ACPI NVS region [mem 0xda83b000-0xda902fff] (819200 bytes) [ 0.146427] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.146427] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.146427] pinctrl core: initialized pinctrl subsystem [ 0.146427] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.146427] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.146427] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.148934] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.148960] thermal_sys: Registered thermal governor 'fair_share' [ 0.148960] thermal_sys: Registered thermal governor 'bang_bang' [ 0.148960] thermal_sys: Registered thermal governor 'step_wise' [ 0.148960] thermal_sys: Registered thermal governor 'user_space' [ 0.148960] thermal_sys: Registered thermal governor 'power_allocator' [ 0.148960] cpuidle: using governor ladder [ 0.148960] cpuidle: using governor menu [ 0.148960] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.148960] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.148960] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.148960] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.148965] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.149009] PCI: Using configuration type 1 for base access [ 0.149031] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.149789] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.149794] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.149794] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.149794] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.149794] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.149794] ACPI: Added _OSI(Module Device) [ 0.149794] ACPI: Added _OSI(Processor Device) [ 0.149794] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149794] ACPI: Added _OSI(Processor Aggregator Device) [ 0.157464] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.158078] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.158607] ACPI: Dynamic OEM Table Load: [ 0.158612] ACPI: SSDT 0xFFFF9651C1117C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.159027] ACPI: Dynamic OEM Table Load: [ 0.159030] ACPI: SSDT 0xFFFF9656C70A5800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.159465] ACPI: Dynamic OEM Table Load: [ 0.159468] ACPI: SSDT 0xFFFF9651C11BB200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.160796] ACPI: Interpreter enabled [ 0.160816] ACPI: PM: (supports S0 S3 S4 S5) [ 0.160817] ACPI: Using IOAPIC for interrupt routing [ 0.160834] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.160835] PCI: Using E820 reservations for host bridge windows [ 0.161058] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.167152] ACPI: PM: Power Resource [FN00] ACPI: PM: Power Resource [FN01] ACPI: PM: Power Resource [FN02] ACPI: PM: Power Resource [FN03] ACPI: PM: Power Resource [FN04] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.167718] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.168215] PCI host bridge to bus 0000:00 [ 0.168216] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.168281] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 [ 0.168288] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.168309] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.168375] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.168461] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.168577] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.168591] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1f000-0xf7d1f00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.168678] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.168688] pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7] pci 0000:00:16.3: reg 0x14: [mem 0xf7d1d000-0xf7d1dfff] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.168793] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.168920] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.168932] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.169042] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.169105] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.169121] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.169123] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.169282] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.169345] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.169360] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.169362] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.169506] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.169571] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.169585] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.169587] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.169736] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.169750] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.169882] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.170025] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.170034] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.170136] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.170149] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.170324] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] pci 0000:02:00.0: supports D1 D2 [ 0.170457] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.170592] pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-04] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.171225] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.171225] ACPI: PCI: Interrupt link LNKB disabled [ 0.171250] ACPI: PCI: Interrupt link LNKC configured for IRQ 3 [ 0.171274] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.171298] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.171298] ACPI: PCI: Interrupt link LNKE disabled [ 0.171322] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.171323] ACPI: PCI: Interrupt link LNKF disabled [ 0.171347] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.171371] ACPI: PCI: Interrupt link LNKH configured for IRQ 4 [ 0.171628] iommu: Default domain type: Translated [ 0.171628] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.171628] pps_core: LinuxPPS API ver. 1 registered [ 0.171628] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.171628] PTP clock support registered [ 0.171628] EDAC MC: Ver: 3.0.0 [ 0.171628] Registered efivars operations [ 0.171628] NetLabel: Initializing [ 0.171628] NetLabel: domain hash size = 128 [ 0.171628] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.171628] NetLabel: unlabeled traffic allowed by default [ 0.171628] PCI: Using ACPI for IRQ routing [ 0.171628] PCI: pci_cache_line_size set to 64 bytes [ 0.171628] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0xc9c86000-0xcbffffff] e820: reserve RAM buffer [mem 0xca59d000-0xcbffffff] e820: reserve RAM buffer [mem 0xda766000-0xdbffffff] e820: reserve RAM buffer [mem 0xda83b000-0xdbffffff] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] e820: reserve RAM buffer [mem 0x81e600000-0x81fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.172789] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.172789] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172789] vgaarb: loaded [ 0.173760] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.173766] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.173766] clocksource: Switched to clocksource tsc-early [ 0.173766] VFS: Disk quotas dquot_6.6.0 [ 0.173766] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.173766] AppArmor: AppArmor Filesystem Enabled [ 0.173766] pnp: PnP ACPI init [ 0.173766] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.173766] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.173766] system 00:01: [io 0xffff] has been reserved [ 0.173766] system 00:01: [io 0xffff] has been reserved [ 0.173766] system 00:01: [io 0xffff] has been reserved [ 0.173766] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.173766] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.173766] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.173766] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.173766] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.173766] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.173766] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.173766] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.173766] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.173766] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.173766] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.173766] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.173766] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.173766] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.173766] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.173766] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.173766] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.173766] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.173766] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.173766] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.173766] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.173766] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.173766] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.173856] pnp: PnP ACPI: found 7 devices [ 0.179122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.179168] NET: Registered PF_INET protocol family [ 0.179295] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.181689] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.181721] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.181818] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.182100] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.182296] TCP: Hash tables configured (established 262144 bind 65536) [ 0.182382] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.182485] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.182545] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.182604] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.182608] NET: Registered PF_XDP protocol family [ 0.182619] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-04] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfeafffff window] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20829 usecs [ 0.224197] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19515 usecs [ 0.224208] PCI: CLS 64 bytes, default 64 [ 0.224224] DMAR: No ATSR found [ 0.224224] DMAR: No SATC found [ 0.224225] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.224226] DMAR: IOMMU feature sc_support inconsistent [ 0.224227] DMAR: IOMMU feature pass_through inconsistent [ 0.224228] DMAR: dmar0: Using Queued invalidation [ 0.224232] DMAR: dmar1: Using Queued invalidation [ 0.224254] Trying to unpack rootfs image as initramfs... [ 0.349503] pci 0000:00:02.0: Adding to iommu group 0 [ 0.349528] pci 0000:00:00.0: Adding to iommu group 1 [ 0.349533] pci 0000:00:03.0: Adding to iommu group 2 [ 0.349539] pci 0000:00:14.0: Adding to iommu group 3 [ 0.349547] pci 0000:00:16.0: Adding to iommu group 4 [ 0.349553] pci 0000:00:16.3: Adding to iommu group 4 [ 0.349558] pci 0000:00:1a.0: Adding to iommu group 5 [ 0.349563] pci 0000:00:1b.0: Adding to iommu group 6 [ 0.349568] pci 0000:00:1c.0: Adding to iommu group 7 [ 0.349576] pci 0000:00:1c.2: Adding to iommu group 8 [ 0.349581] pci 0000:00:1c.3: Adding to iommu group 9 [ 0.349586] pci 0000:00:1d.0: Adding to iommu group 10 [ 0.349596] pci 0000:00:1f.0: Adding to iommu group 11 [ 0.349601] pci 0000:00:1f.2: Adding to iommu group 11 [ 0.349608] pci 0000:00:1f.3: Adding to iommu group 11 [ 0.349614] pci 0000:02:00.0: Adding to iommu group 12 [ 0.350300] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.350302] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.350303] software IO TLB: mapped [mem 0x00000000c5c86000-0x00000000c9c86000] (64MB) [ 0.350583] Initialise system trusted keyrings [ 0.350590] Key type blacklist registered [ 0.350629] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.351489] zbud: loaded [ 0.351622] integrity: Platform Keyring initialized [ 0.351625] integrity: Machine keyring initialized [ 0.351626] Key type asymmetric registered [ 0.351627] Asymmetric key parser 'x509' registered [ 0.492796] Freeing initrd memory: 59472K [ 0.496405] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.496425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.496454] io scheduler mq-deadline registered [ 0.497412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.498122] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.498124] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.498248] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.498249] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.498342] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.498565] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.498727] 0000:00:16.3: ttyS0 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A [ 0.498878] Linux agpgart interface v0.103 [ 0.498915] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.499349] i8042: PNP: No PS/2 controller found. [ 0.499376] mousedev: PS/2 mouse device common for all mice [ 0.499391] rtc_cmos 00:02: RTC can wake from S4 [ 0.499569] rtc_cmos 00:02: registered as rtc0 [ 0.499598] rtc_cmos 00:02: setting system clock to 2025-01-08T12:50:22 UTC (1736340622) [ 0.499614] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.499861] intel_pstate: Intel P-state driver initializing [ 0.500339] ledtrig-cpu: registered to indicate activity on CPUs [ 0.500533] efifb: probing for efifb [ 0.500541] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.500542] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.500543] efifb: scrolling: redraw [ 0.500543] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.500625] Console: switching to colour frame buffer device 128x48 [ 0.501103] fb0: EFI VGA frame buffer device [ 0.509131] NET: Registered PF_INET6 protocol family [ 0.513060] Segment Routing with IPv6 [ 0.513067] In-situ OAM (IOAM) with IPv6 [ 0.513082] mip6: Mobile IPv6 [ 0.513084] NET: Registered PF_PACKET protocol family [ 0.513185] mpls_gso: MPLS GSO support [ 0.513756] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.513928] microcode: Microcode Update Driver: v2.2. [ 0.513933] IPI shorthand broadcast: enabled [ 0.513950] sched_clock: Marking stable (513580298, 136685)->(520230994, -6514011) [ 0.514185] registered taskstats version 1 [ 0.514191] Loading compiled-in X.509 certificates [ 0.528129] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.528158] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.528727] zswap: loaded using pool lzo/zbud [ 0.528995] Key type .fscrypt registered [ 0.528996] Key type fscrypt-provisioning registered [ 0.531978] Key type encrypted registered [ 0.531981] AppArmor: AppArmor sha1 policy hashing enabled [ 0.532129] ima: No TPM chip found, activating TPM-bypass! [ 0.532130] ima: Allocated hash algorithm: sha256 [ 0.532142] ima: No architecture policies found [ 0.532161] evm: Initialising EVM extended attributes: [ 0.532162] evm: security.selinux [ 0.532163] evm: security.SMACK64 (disabled) [ 0.532164] evm: security.SMACK64EXEC (disabled) [ 0.532164] evm: security.SMACK64TRANSMUTE (disabled) [ 0.532165] evm: security.SMACK64MMAP (disabled) [ 0.532165] evm: security.apparmor [ 0.532166] evm: security.ima [ 0.532166] evm: security.capability [ 0.532167] evm: HMAC attrs: 0x1 [ 0.605025] clk: Disabling unused clocks [ 0.605716] Freeing unused decrypted memory: 2036K [ 0.606044] Freeing unused kernel image (initmem) memory: 2800K [ 0.606091] Write protecting the kernel read-only data: 26624k [ 0.606560] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 0.606749] Freeing unused kernel image (rodata/data gap) memory: 1160K [ 0.641643] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.641644] x86/mm: Checking user space page tables [ 0.674403] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.674411] Run /init as init process [ 0.674413] with arguments: [ 0.674414] /init [ 0.674414] with environment: [ 0.674415] HOME=/ [ 0.674415] TERM=linux [ 0.674416] BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64 [ 0.748455] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.758097] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ 0.758105] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.758108] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.758112] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.758113] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 0.758117] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.758120] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.758121] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 0.758125] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.758128] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.758129] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.759084] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 0.759176] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.759203] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.759780] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 0.760939] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.761217] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.761493] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 0.761770] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.772169] SCSI subsystem initialized [ 0.773220] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.773312] ACPI: button: Power Button [PWRF] ACPI: bus type USB registered [ 0.776544] usbcore: registered new interface driver usbfs [ 0.776550] usbcore: registered new interface driver hub [ 0.776560] usbcore: registered new device driver usb [ 0.795880] ACPI: bus type drm_connector registered [ 0.796100] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.798877] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 3CC17AB801618921443C93D24108B191, XID 2c9, IRQ 29 [ 0.798880] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] libata version 3.00 loaded. [ 0.803109] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.803116] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.803126] ehci-pci 0000:00:1a.0: debug port 2 [ 0.805440] ahci 0000:00:1f.2: version 3.0 [ 0.805575] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.805578] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.807038] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000 [ 0.820334] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.820373] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.820375] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.820377] usb usb1: Product: EHCI Host Controller [ 0.820379] usb usb1: Manufacturer: Linux 6.1.0-28-amd64 ehci_hcd [ 0.820380] usb usb1: SerialNumber: ... [ 0.820565] hub 1-0:1.0: USB hub found [ 0.820570] hub 1-0:1.0: 2 ports detected [ 0.820701] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.820707] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.821815] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.821919] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.821926] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.821940] ehci-pci 0000:00:1d.0: debug port 2 [ 0.821951] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.821953] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.821955] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.821979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.821980] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.821981] usb usb2: Product: xHCI Host Controller [ 0.821982] usb usb2: Manufacturer: Linux 6.1.0-28-amd64 xhci-hcd [ 0.821983] usb usb2: SerialNumber: ... [ 0.822091] hub 2-0:1.0: USB hub found [ 0.822122] hub 2-0:1.0: 12 ports detected [ 0.824005] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.824010] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.824011] usb usb4: Product: xHCI Host Controller [ 0.824012] usb usb4: Manufacturer: Linux 6.1.0-28-amd64 xhci-hcd [ 0.824013] usb usb4: SerialNumber: ... [ 0.824128] hub 4-0:1.0: USB hub found [ 0.824149] hub 4-0:1.0: 6 ports detected [ 0.825885] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000 [ 0.828223] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 0.840173] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.840214] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.840216] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.840217] usb usb3: Product: EHCI Host Controller [ 0.840218] usb usb3: Manufacturer: Linux 6.1.0-28-amd64 ehci_hcd [ 0.840219] usb usb3: SerialNumber: ... [ 0.840411] hub 3-0:1.0: USB hub found [ 0.840415] hub 3-0:1.0: 2 ports detected [ 0.872631] scsi host0: ahci [ 0.872733] scsi host1: ahci [ 0.872898] scsi host2: ahci [ 0.873007] scsi host3: ahci [ 0.873107] scsi host4: ahci [ 0.873168] scsi host5: ahci [ 0.873200] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 30 [ 0.873204] ata2: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a180 irq 30 [ 0.873206] ata3: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a200 irq 30 [ 0.873208] ata4: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a280 irq 30 [ 0.873209] ata5: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a300 irq 30 [ 0.873211] ata6: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a380 irq 30 [ 1.076148] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.083130] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 1.083219] Console: switching to colour dummy device 80x25 [ 1.083253] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.083490] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 1.083492] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 1.083944] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.100177] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.109592] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 1.110440] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.110633] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.124293] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.186880] ata6: SATA link down (SStatus 0 SControl 300) [ 1.186896] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.186911] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.186927] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.186940] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.186965] ata5: SATA link down (SStatus 0 SControl 300) [ 1.187712] ata2.00: ATA-10: TOSHIBA MG06ACA800E, 0108, max UDMA/133 [ 1.187752] ata3.00: ATA-10: TOSHIBA MG06ACA800E, 0108, max UDMA/133 [ 1.187792] ata4.00: ATA-10: TOSHIBA MG06ACA800E, 0108, max UDMA/133 [ 1.187812] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.187900] ata4.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.188205] ata3.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.188804] ata2.00: configured for UDMA/133 [ 1.189002] ata4.00: configured for UDMA/133 [ 1.189285] ata3.00: configured for UDMA/133 [ 1.192754] ata1.00: ATA-10: TS1TSSD220Q, VD0R0230, max UDMA/133 [ 1.193870] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.204403] ata1.00: Features: Dev-Sleep [ 1.221503] ata1.00: configured for UDMA/133 [ 1.221698] scsi 0:0:0:0: Direct-Access ATA TS1TSSD220Q 0230 PQ: 0 ANSI: 5 [ 1.222183] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MG06ACA8 0108 PQ: 0 ANSI: 5 [ 1.222464] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MG06ACA8 0108 PQ: 0 ANSI: 5 [ 1.222728] scsi 3:0:0:0: Direct-Access ATA TOSHIBA MG06ACA8 0108 PQ: 0 ANSI: 5 [ 1.226669] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.230314] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.232554] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.232557] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.232728] hub 1-1:1.0: USB hub found [ 1.232798] hub 1-1:1.0: 6 ports detected [ 1.235629] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.235630] sd 3:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.235633] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 1.235641] sd 0:0:0:0: [sda] Write Protect is off [ 1.235643] sd 3:0:0:0: [sdb] Write Protect is off [ 1.235645] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.235645] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.235659] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.235669] sd 1:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.235670] sd 1:0:0:0: [sdc] 4096-byte physical blocks [ 1.235672] sd 2:0:0:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.235674] sd 2:0:0:0: [sdd] 4096-byte physical blocks [ 1.235677] sd 1:0:0:0: [sdc] Write Protect is off [ 1.235679] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.235683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.235684] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.235685] sd 2:0:0:0: [sdd] Write Protect is off [ 1.235688] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.235698] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.235706] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.235707] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.235716] sd 1:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 1.235726] sd 2:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 1.237258] sda: sda1 sda2 sda3 [ 1.237431] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.256592] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.256604] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.256916] hub 3-1:1.0: USB hub found [ 1.257094] hub 3-1:1.0: 6 ports detected [ 1.266797] Alternate GPT is invalid, using primary GPT. [ 1.266801] sdb: sdb1 [ 1.266879] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.273396] sdd: sdd1 [ 1.273523] sd 2:0:0:0: [sdd] Attached SCSI disk [ 1.278243] sdc: sdc1 [ 1.278328] sd 1:0:0:0: [sdc] Attached SCSI disk [ 1.368177] tsc: Refined TSC clocksource calibration: 3392.145 MHz [ 1.368182] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e55212bb0, max_idle_ns: 440795241820 ns [ 1.368209] clocksource: Switched to clocksource tsc [ 1.522780] PM: Image not found (code -22) [ 1.606088] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.647738] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 1.950785] pstore: Using crash dump compression: deflate [ 1.953345] loop: module loaded [ 1.954243] pstore: Registered efi as persistent store backend [ 1.959169] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.959210] device-mapper: uevent: version 1.0.3 [ 1.959289] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 1.961539] fuse: init (API version 7.38) [ 1.961897] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 1.997864] RPC: Registered named UNIX socket transport module. [ 1.997868] RPC: Registered udp transport module. [ 1.997869] RPC: Registered tcp transport module. [ 1.997869] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.184226] ata1.00: exception Emask 0x10 SAct 0x1cffc00 SErr 0x400100 action 0x6 frozen [ 2.184244] ata1.00: irq_stat 0x08000000, interface fatal error [ 2.184246] ata1: SError: { UnrecovData Handshk } [ 2.184249] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184251] ata1.00: cmd 61/28:50:e0:cd:13/00:00:00:00:00/40 tag 10 ncq dma 20480 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184256] ata1.00: status: { DRDY } [ 2.184258] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184259] ata1.00: cmd 61/08:58:10:ce:13/00:00:00:00:00/40 tag 11 ncq dma 4096 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184263] ata1.00: status: { DRDY } [ 2.184265] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184266] ata1.00: cmd 61/08:60:20:ce:13/00:00:00:00:00/40 tag 12 ncq dma 4096 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184270] ata1.00: status: { DRDY } [ 2.184272] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184273] ata1.00: cmd 61/08:68:30:ce:13/00:00:00:00:00/40 tag 13 ncq dma 4096 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184277] ata1.00: status: { DRDY } [ 2.184279] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184280] ata1.00: cmd 61/30:70:48:ce:13/00:00:00:00:00/40 tag 14 ncq dma 24576 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184285] ata1.00: status: { DRDY } [ 2.184286] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184288] ata1.00: cmd 61/10:78:b0:ce:13/00:00:00:00:00/40 tag 15 ncq dma 8192 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184292] ata1.00: status: { DRDY } [ 2.184294] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184295] ata1.00: cmd 61/20:80:e0:ce:13/00:00:00:00:00/40 tag 16 ncq dma 16384 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184299] ata1.00: status: { DRDY } [ 2.184301] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184302] ata1.00: cmd 61/20:88:10:cf:13/00:00:00:00:00/40 tag 17 ncq dma 16384 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184306] ata1.00: status: { DRDY } [ 2.184308] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184309] ata1.00: cmd 61/10:90:40:cf:13/00:00:00:00:00/40 tag 18 ncq dma 8192 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184313] ata1.00: status: { DRDY } [ 2.184315] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184316] ata1.00: cmd 61/20:98:70:cf:13/00:00:00:00:00/40 tag 19 ncq dma 16384 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184320] ata1.00: status: { DRDY } [ 2.184322] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184323] ata1.00: cmd 61/08:b0:a0:cf:13/00:00:00:00:00/40 tag 22 ncq dma 4096 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184328] ata1.00: status: { DRDY } [ 2.184329] ata1.00: failed command: READ FPDMA QUEUED [ 2.184330] ata1.00: cmd 60/08:b8:00:f8:0d/00:00:06:00:00/40 tag 23 ncq dma 4096 in res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184335] ata1.00: status: { DRDY } [ 2.184336] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.184337] ata1.00: cmd 61/08:c0:b0:cf:13/00:00:00:00:00/40 tag 24 ncq dma 4096 out res 40/00:c0:b0:cf:13/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 2.184342] ata1.00: status: { DRDY } [ 2.184344] ata1: hard resetting link [ 2.498977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.533374] ata1.00: configured for UDMA/133 [ 2.533409] sd 0:0:0:0: [sda] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 2.533411] sd 0:0:0:0: [sda] tag#23 Sense Key : Illegal Request [current] sd 0:0:0:0: [sda] tag#23 Add. Sense: Unaligned write command [ 2.533415] sd 0:0:0:0: [sda] tag#23 CDB: Read(10) 28 00 06 0d f8 00 00 00 08 00 [ 2.533415] I/O error, dev sda, sector 101578752 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 2.533424] ata1: EH complete [ 2.612158] ata1.00: exception Emask 0x50 SAct 0x8cc00 SErr 0x44d0902 action 0xe frozen [ 2.612170] ata1.00: irq_stat 0x08000000, interface fatal error [ 2.612174] ata1: SError: { RecovComm UnrecovData HostInt PHYRdyChg CommWake 10B8B Handshk DevExch } [ 2.612182] ata1.00: failed command: READ FPDMA QUEUED [ 2.612186] ata1.00: cmd 60/78:50:20:a4:0f/00:00:12:00:00/40 tag 10 ncq dma 61440 in res 40/00:78:18:da:13/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 2.612198] ata1.00: status: { DRDY } [ 2.612201] ata1.00: failed command: READ FPDMA QUEUED [ 2.612204] ata1.00: cmd 60/c0:58:20:96:4c/00:00:1b:00:00/40 tag 11 ncq dma 98304 in res 40/00:78:18:da:13/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 2.612215] ata1.00: status: { DRDY } [ 2.612218] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.612221] ata1.00: cmd 61/08:70:08:da:13/00:00:00:00:00/40 tag 14 ncq dma 4096 out res 40/00:78:18:da:13/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 2.612230] ata1.00: status: { DRDY } [ 2.612233] ata1.00: failed command: WRITE FPDMA QUEUED [ 2.612236] ata1.00: cmd 61/08:78:18:da:13/00:00:00:00:00/40 tag 15 ncq dma 4096 out res 40/00:78:18:da:13/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 2.612245] ata1.00: status: { DRDY } [ 2.612248] ata1.00: failed command: READ FPDMA QUEUED [ 2.612251] ata1.00: cmd 60/00:98:20:bc:0e/01:00:14:00:00/40 tag 19 ncq dma 131072 in res 40/00:78:18:da:13/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 2.612260] ata1.00: status: { DRDY } [ 2.612266] ata1: hard resetting link [ 3.324185] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.358601] ata1.00: configured for UDMA/133 [ 3.358628] sd 0:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 3.358630] sd 0:0:0:0: [sda] tag#10 Sense Key : Illegal Request [current] sd 0:0:0:0: [sda] tag#10 Add. Sense: Unaligned write command [ 3.358634] sd 0:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 12 0f a4 20 00 00 78 00 [ 3.358634] I/O error, dev sda, sector 303014944 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 3.358646] sd 0:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 3.358647] sd 0:0:0:0: [sda] tag#11 Sense Key : Illegal Request [current] sd 0:0:0:0: [sda] tag#11 Add. Sense: Unaligned write command [ 3.358649] sd 0:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 1b 4c 96 20 00 00 c0 00 [ 3.358650] I/O error, dev sda, sector 458004000 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2 [ 3.358657] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 3.358658] sd 0:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command [ 3.358659] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 14 0e bc 20 00 01 00 00 [ 3.358660] I/O error, dev sda, sector 336509984 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2 [ 3.358664] ata1: EH complete [ 3.366930] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.380911] EDAC ie31200: No ECC support [ 3.381105] EDAC ie31200: No ECC support [ 3.386543] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.387349] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.389889] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.390218] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.424624] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.424627] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.424628] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.424629] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.424630] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.428460] cryptd: max_cpu_qlen set to 1000 [ 3.442879] AVX2 version of gcm_enc/dec engaged. [ 3.442916] AES CTR mode by8 optimization enabled [ 3.726358] iTCO_vendor_support: vendor-support=0 [ 3.733171] at24 0-0050: supply vcc not found, using dummy regulator [ 3.736057] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 3.737383] at24 0-0050: 256 byte spd EEPROM, read-only [ 3.737406] at24 0-0051: supply vcc not found, using dummy regulator [ 3.740055] at24 0-0051: 256 byte spd EEPROM, read-only [ 3.740088] at24 0-0052: supply vcc not found, using dummy regulator [ 3.741572] at24 0-0052: 256 byte spd EEPROM, read-only [ 3.741643] at24 0-0053: supply vcc not found, using dummy regulator [ 3.743434] at24 0-0053: 256 byte spd EEPROM, read-only [ 3.750972] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 3.751101] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 3.751399] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.764640] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 3.764702] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 3.764775] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 3.812423] Adding 1000444k swap on /dev/sda3. Priority:-2 extents:1 across:1000444k SSFS [ 3.864050] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.864057] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.864059] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.864062] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 3.864063] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0 [ 3.864065] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 3.864066] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 3.864068] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 3.864070] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 3.882542] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 3.882637] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 3.883906] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 3.883993] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 3.884091] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 3.885586] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 3.885882] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 3.885982] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 3.890105] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 3.891077] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0 [ 3.892630] intel_rapl_common: Found RAPL domain package [ 3.892633] intel_rapl_common: Found RAPL domain core [ 3.892634] intel_rapl_common: Found RAPL domain uncore [ 3.892635] intel_rapl_common: Found RAPL domain dram [ 3.973825] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 3.974211] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 4.210608] r8169 0000:02:00.0 enp2s0: Link is Down [ 4.346012] NET: Registered PF_QIPCRTR protocol family [ 4.667237] NFSD: Using nfsdcld client tracking operations. [ 4.667240] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 6.264377] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Quota mode: none. [ 6.514757] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 6.514793] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.323711] EXT4-fs (sdd1): warning: mounting fs with errors, running e2fsck is recommended [ 8.351491] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none. [ 10.421587] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [ 316.451430] EXT4-fs (sdd1): error count since last fsck: 3 [ 316.451465] EXT4-fs (sdd1): initial error at time 1690554548: ext4_check_bdev_write_error:217 [ 316.451475] EXT4-fs (sdd1): last error at time 1690557184: ext4_journal_check_start:83 [ 561.726257] r8169 0000:02:00.0 enp2s0: Link is Down [ 561.962572] EXT4-fs (sdd1): unmounting filesystem. [ 561.963581] EXT4-fs (sdb1): unmounting filesystem. [ 562.007622] EXT4-fs (sdc1): unmounting filesystem.