[ 1.656024] tsc: Refined TSC clocksource calibration: 2693.890 MHz [ 1.656088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4b29df16, max_idle_ns: 440795269472 ns [ 1.656112] clocksource: Switched to clocksource tsc [ 1.923022] device-mapper: uevent: version 1.0.3 [ 1.923089] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 1.972017] xor: automatically using best checksumming function avx [ 2.001014] raid6: sse2x4 gen() 7630 MB/s [ 2.019008] raid6: sse2x2 gen() 7981 MB/s [ 2.036008] raid6: sse2x1 gen() 7152 MB/s [ 2.036039] raid6: using algorithm sse2x2 gen() 7981 MB/s [ 2.059011] raid6: .... xor() 5094 MB/s, rmw enabled [ 2.059045] raid6: using ssse3x2 recovery algorithm [ 2.212025] Btrfs loaded, zoned=yes, fsverity=yes [ 2.269406] ACPI: bus type USB registered [ 2.269485] usbcore: registered new interface driver usbfs [ 2.269511] usbcore: registered new interface driver hub [ 2.269530] usbcore: registered new device driver usb [ 2.889034] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 [ 2.896018] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 2.896097] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 2.902016] ACPI: button: Power Button [PWRF] ACPI: battery: Slot [BAT1] (battery present) [ 2.973022] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.985183] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.985426] ehci-pci 0000:00:1d.0: debug port 2 [ 2.985660] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f3f000 [ 2.985877] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.986119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.986318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.986490] usb usb1: Product: EHCI Host Controller [ 2.986656] usb usb1: Manufacturer: Linux 6.12.1-desktop-1omv2490 ehci_hcd [ 2.986821] usb usb1: SerialNumber: ... [ 2.986984] hub 1-0:1.0: USB hub found [ 2.987217] hub 1-0:1.0: 3 ports detected [ 2.987435] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.993760] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 2.994030] ehci-pci 0000:00:1a.0: debug port 2 [ 2.994245] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f40000 [ 2.994457] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.994661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.994856] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.995071] usb usb2: Product: EHCI Host Controller [ 2.995251] usb usb2: Manufacturer: Linux 6.12.1-desktop-1omv2490 ehci_hcd [ 2.995422] usb usb2: SerialNumber: ... [ 2.995589] hub 2-0:1.0: USB hub found [ 2.995780] hub 2-0:1.0: 3 ports detected [ 3.022046] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.077182] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.077417] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 3.077605] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.077786] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.077973] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.078162] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 3.078341] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.078501] usb usb3: Product: xHCI Host Controller [ 3.078650] usb usb3: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd [ 3.078801] usb usb3: SerialNumber: ... [ 3.078949] hub 3-0:1.0: USB hub found [ 3.079145] hub 3-0:1.0: 4 ports detected [ 3.079305] cryptd: max_cpu_qlen set to 1000 [ 3.079323] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 3.079482] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.079630] usb usb4: Product: xHCI Host Controller [ 3.079774] usb usb4: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd [ 3.079917] usb usb4: SerialNumber: ... [ 3.080070] hub 4-0:1.0: USB hub found [ 3.080240] hub 4-0:1.0: 4 ports detected [ 3.080396] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.111039] AES CTR mode by8 optimization enabled [ 3.169022] SCSI subsystem initialized [ 3.176016] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 3.224644] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.233020] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.255035] ACPI: bus type drm_connector registered [ 3.282018] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 3.296031] libata version 3.00 loaded. [ 3.302015] Linux agpgart interface v0.103 [ 3.313022] ahci 0000:00:1f.2: version 3.0 [ 3.333383] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.333613] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 3.333824] ahci 0000:00:1f.2: 2/6 ports implemented (port mask 0x3) [ 3.334050] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 3.334266] scsi host0: ahci [ 3.334463] scsi host1: ahci [ 3.334641] scsi host2: ahci [ 3.334817] scsi host3: ahci [ 3.334996] scsi host4: ahci [ 3.335237] scsi host5: ahci [ 3.335429] ata1: SATA max UDMA/133 abar m2048@0xf7f3e000 port 0xf7f3e100 irq 30 lpm-pol 0 [ 3.335451] ata2: SATA max UDMA/133 abar m2048@0xf7f3e000 port 0xf7f3e180 irq 30 lpm-pol 0 [ 3.335469] ata3: DUMMY [ 3.335486] ata4: DUMMY [ 3.335502] ata5: DUMMY [ 3.335519] ata6: DUMMY [ 3.350045] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.355118] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.355318] hub 1-1:1.0: USB hub found [ 3.355538] hub 1-1:1.0: 8 ports detected [ 3.358045] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.360531] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.360727] hub 2-1:1.0: USB hub found [ 3.360931] hub 2-1:1.0: 6 ports detected [ 3.408016] usb 3-2: New USB device found, idVendor=058f, idProduct=9254, bcdDevice= 1.00 [ 3.408970] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.409152] usb 3-2: Product: Generic USB Hub [ 3.409320] usb 3-2: Manufacturer: ALCOR [ 3.409476] hub 3-2:1.0: USB hub found [ 3.409660] hub 3-2:1.0: 4 ports detected [ 3.643047] usb 2-1.4: new full-speed USB device number 3 using ehci-pci [ 3.643116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.646021] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 3.677012] usb 3-2.3: new low-speed USB device number 3 using xhci_hcd [ 3.719010] psmouse serio2: synaptics: queried max coordinates: x [..5888], y [..4752] usb 2-1.4: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.02 [ 3.810906] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.812757] usb 2-1.4: Product: Biometric Coprocessor [ 3.813048] usb 2-1.4: Manufacturer: UPEK [ 3.813328] usb 3-2.3: New USB device found, idVendor=192f, idProduct=0416, bcdDevice= 2.00 [ 3.813533] usb 3-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 3.813722] usb 3-2.3: Product: USB Optical Mouse [ 3.813907] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x39a0b2, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 650695 [ 3.814102] ata1.00: ATA-8: ST320LT020-9YG142, 0001SDM1, max UDMA/133 [ 3.814123] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.814141] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 3.814158] ata1.00: configured for UDMA/133 [ 3.814174] scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 SDM1 PQ: 0 ANSI: 5 [ 3.814383] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 3.837015] usb 3-2.4: new low-speed USB device number 4 using xhci_hcd [ 3.926071] usb 3-2.4: New USB device found, idVendor=099a, idProduct=6330, bcdDevice= 1.00 [ 3.926857] usb 3-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 3.927059] usb 3-2.4: Product: USB Keyboard [ 3.948029] hid: raw HID events driver (C) Jiri Kosina [ 3.967018] usbcore: registered new interface driver usbhid [ 3.967066] usbhid: USB HID core driver [ 4.101608] ata2: SATA link down (SStatus 0 SControl 300) [ 4.106081] usbcore: registered new interface driver usbmouse [ 4.109792] usbcore: registered new interface driver usbkbd [ 4.112021] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:192F:0416.0001/input/input12 [ 4.112077] hid-generic 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2.3/input0 [ 4.112395] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:099A:6330.0002/input/input13 [ 4.119059] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 4.324358] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.324569] sd 0:0:0:0: [sda] Write Protect is off [ 4.324737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.324901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.325093] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.325261] hid-generic 0003:099A:6330.0002: input,hidraw1: USB HID v1.00 Keyboard [USB Keyboard ] on usb-0000:00:14.0-2.4/input0 [ 4.325453] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:099A:6330.0003/input/input14 [ 4.325471] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:099A:6330.0003/input/input15 [ 4.325488] hid-generic 0003:099A:6330.0003: input,hidraw2: USB HID v1.00 Device [USB Keyboard ] on usb-0000:00:14.0-2.4/input1 [ 4.325676] sda: sda1 sda2 sda3 sda4 sda5 [ 4.325693] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.740028] i915 0000:00:02.0: [drm] Found IVYBRIDGE (device ID 0166) display version 7.00 stepping N/A [ 4.805327] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.805561] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 4.805583] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.805600] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 4.805616] fbcon: i915drmfb (fb0) is primary device [ 4.805633] fbcon: Deferring console take-over [ 4.805649] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.519049] EXT4-fs (sda5): orphan cleanup on readonly fs [ 5.519097] EXT4-fs (sda5): mounted filesystem HASH_96D-B1DF-C0E1-FEDB-2843E973064B ro with ordered data mode. Quota mode: none. [ 19.527538] zram0: detected capacity change from 0 to 3881984 [ 19.863017] Adding 1940988k swap on /dev/zram0. Priority:100 extents:1 across:1940988k SSDsc [ 20.192805] Consider using thermal netlink events interface [ 20.257019] ACPI: AC: AC Adapter [AC] (on-line) [ 20.261014] input: Panasonic Laptop Support as /devices/virtual/input/input17 [ 20.390034] thermal LNXTHERM:00: registered as thermal_zone6 [ 20.390335] ACPI: thermal: Thermal Zone [TZ00] (62 C) [ 20.396154] thermal LNXTHERM:01: registered as thermal_zone7 [ 20.396448] ACPI: thermal: Thermal Zone [TZ01] (62 C) [ 20.407052] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240827/utaddress-204) [ 20.407156] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 20.407185] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 20.407212] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 20.407238] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 20.407261] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 20.407287] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 20.407312] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 20.407333] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 20.429035] e1000e: Intel(R) PRO/1000 Network Driver [ 20.429101] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 20.429149] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 20.596527] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 20.596768] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16) [ 20.596942] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 20.597224] i2c i2c-7: Different memory types mixed, not instantiating SPD [ 20.597412] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 83CE92CAD1C8EC32766A3BC09A61AEFC [ 20.597629] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 20.597843] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 20.646461] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 20.862032] iTCO_vendor_support: vendor-support=0 [ 20.991818] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 20.992242] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 20.993026] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 20.997522] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.997621] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 21.365018] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 21.365091] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 21.365112] RAPL PMU: hw unit of domain package 2^-16 Joules [ 21.365129] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 21.402020] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 21.488023] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 21.508561] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.508776] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 21.509580] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 21.509827] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 21.510042] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 21.510161] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18 [ 21.572029] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 21.573020] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 21.573082] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 21.890023] Intel(R) Wireless WiFi driver for Linux [ 21.890146] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 21.897840] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1 [ 21.898102] iwlwifi 0000:02:00.0: PCI dev 0082/1301, rev=0xb0, rfid=0xd55555d5 [ 21.898323] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN [ 21.924031] iwlwifi 0000:02:00.0: loaded firmware version XXX.XXX.XXX.XXX 6000g2a-6.ucode op_mode iwldvm [ 22.119048] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 22.119443] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 22.119793] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 22.120200] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 22.162024] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 22.165058] intel_rapl_common: Found RAPL domain package [ 22.165122] intel_rapl_common: Found RAPL domain core [ 22.165170] intel_rapl_common: Found RAPL domain uncore [ 22.165192] intel_rapl_common: package-0:package:long_term locked by BIOS [ 22.165209] intel_rapl_common: package-0:package:short_term locked by BIOS [ 22.238025] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 23.126018] Adding 4193292k swap on /dev/sda3. Priority:-2 extents:1 across:4193292k [ 26.926063] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 27.218009] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 27.324021] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 27.624014] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 28.778031] NET: Registered PF_PACKET protocol family [ 28.958230] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx [ 93.704477] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 423.510114] Non-volatile memory driver v1.3 [ 424.113203] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 424.157103] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 428.411089] Bluetooth: Core ver 2.22 [ 428.411526] NET: Registered PF_BLUETOOTH protocol family [ 428.411565] Bluetooth: HCI device and connection manager initialized [ 428.411593] Bluetooth: HCI socket layer initialized [ 428.411621] Bluetooth: L2CAP socket layer initialized [ 428.411646] Bluetooth: SCO socket layer initialized [ 446.046077] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 446.338038] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 861.056845] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 861.346088] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 1276.034958] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 1276.463982] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 1330.236487] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 1330.303030] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 1331.158050] zram0: detected capacity change from 3881984 to 0