[ 1.301996] device-mapper: uevent: version 1.0.3 [ 1.303267] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 1.338263] tsc: Refined TSC clocksource calibration: 3100.021 MHz [ 1.338269] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf5bd675d, max_idle_ns: 440795281274 ns [ 1.338284] clocksource: Switched to clocksource tsc [ 1.338291] raid6: sse2x4 gen() 956 MB/s [ 1.366254] raid6: sse2x4 xor() 8802 MB/s [ 1.394253] raid6: sse2x2 gen() 15859 MB/s [ 1.419253] raid6: sse2x2 xor() 8526 MB/s [ 1.442253] raid6: sse2x1 gen() 13098 MB/s [ 1.464253] raid6: sse2x1 xor() 7780 MB/s [ 1.464254] raid6: using algorithm sse2x2 gen() 15859 MB/s [ 1.464255] raid6: .... xor() 8526 MB/s, rmw enabled [ 1.464256] raid6: using ssse3x2 recovery algorithm [ 1.465218] xor: automatically using best checksumming function avx [ 1.532340] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no [ 1.548215] ACPI: bus type USB registered [ 1.548235] usbcore: registered new interface driver usbfs [ 1.548242] usbcore: registered new interface driver hub [ 1.551256] usbcore: registered new device driver usb [ 1.553341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.916803] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.922088] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.922866] ACPI: button: Power Button [PWRF] Linux agpgart interface v0.103 [ 1.993583] SCSI subsystem initialized [ 2.004884] ehci-pci: EHCI PCI platform driver [ 2.005017] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.005024] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.005035] ehci-pci 0000:00:1a.0: debug port 2 [ 2.008958] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e08000 [ 2.016262] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.016301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 2.016304] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.016305] usb usb1: Product: EHCI Host Controller [ 2.016306] usb usb1: Manufacturer: Linux 5.16.7-desktop-1omv4003 ehci_hcd [ 2.016307] usb usb1: SerialNumber: ... [ 2.016398] hub 1-0:1.0: USB hub found [ 2.016405] hub 1-0:1.0: 2 ports detected [ 2.016648] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.016652] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.016663] ehci-pci 0000:00:1d.0: debug port 2 [ 2.020585] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e07000 [ 2.027259] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.027293] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 2.027296] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.027297] usb usb2: Product: EHCI Host Controller [ 2.027298] usb usb2: Manufacturer: Linux 5.16.7-desktop-1omv4003 ehci_hcd [ 2.027299] usb usb2: SerialNumber: ... [ 2.027487] hub 2-0:1.0: USB hub found [ 2.027495] hub 2-0:1.0: 2 ports detected [ 2.042274] libata version 3.00 loaded. [ 2.066269] cryptd: max_cpu_qlen set to 1000 [ 2.069724] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 2.069731] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3 [ 2.083443] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 2.086298] AVX version of gcm_enc/dec engaged. [ 2.086322] AES CTR mode by8 optimization enabled [ 2.087030] ACPI: bus type drm_connector registered [ 2.094331] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 2.094335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.094337] usb usb3: Product: xHCI Host Controller [ 2.094338] usb usb3: Manufacturer: Linux 5.16.7-desktop-1omv4003 xhci-hcd [ 2.094339] usb usb3: SerialNumber: ... [ 2.094764] hub 3-0:1.0: USB hub found [ 2.094774] hub 3-0:1.0: 2 ports detected [ 2.095236] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 2.095239] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 [ 2.095242] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 2.097003] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.097020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16 [ 2.097022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.097024] usb usb4: Product: xHCI Host Controller [ 2.097025] usb usb4: Manufacturer: Linux 5.16.7-desktop-1omv4003 xhci-hcd [ 2.097026] usb usb4: SerialNumber: ... [ 2.097093] hub 4-0:1.0: USB hub found [ 2.097102] hub 4-0:1.0: 2 ports detected [ 2.099224] ahci 0000:00:1f.2: version 3.0 [ 2.099538] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x0 impl SATA mode [ 2.099542] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 2.108277] scsi host0: ahci [ 2.114272] scsi host1: ahci [ 2.122275] scsi host2: ahci [ 2.130267] scsi host3: ahci [ 2.137269] scsi host4: ahci [ 2.142272] scsi host5: ahci [ 2.142303] ata1: DUMMY [ 2.142304] ata2: DUMMY [ 2.142305] ata3: DUMMY [ 2.142306] ata4: DUMMY [ 2.142306] ata5: DUMMY [ 2.142307] ata6: DUMMY [ 2.154262] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.154266] ahci 0000:02:00.0: flags: 64bit ncq sntf led pio slum part [ 2.158271] scsi host6: ahci [ 2.158306] ata7: SATA max UDMA/133 abar m512@0xf7d20000 port 0xf7d20100 irq 31 [ 2.260258] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.268254] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.388621] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.388626] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.388768] hub 1-1:1.0: USB hub found [ 2.388867] hub 1-1:1.0: 6 ports detected [ 2.396620] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.396623] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.396762] hub 2-1:1.0: USB hub found [ 2.396868] hub 2-1:1.0: 8 ports detected [ 2.422976] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2.435031] usb 4-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 2.435034] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.435036] usb 4-2: Product: SanDisk 3.2Gen1 [ 2.435037] usb 4-2: Manufacturer: USB [ 2.435038] usb 4-2: SerialNumber: ... [ 2.462313] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.462618] ata7.00: ATA-9: SanDisk SD6PP4M-256G-1006, A200906, max UDMA/100 [ 2.462654] ata7.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.464087] ata7.00: configured for UDMA/100 [ 2.464171] scsi 6:0:0:0: Direct-Access ATA SanDisk SD6PP4M- 906 PQ: 0 ANSI: 5 [ 2.494184] usb-storage 4-2:1.0: USB Mass Storage device detected [ 2.497108] sd 6:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.497116] sd 6:0:0:0: [sda] Write Protect is off [ 2.497118] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.497128] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.503484] sda: sda1 [ 2.507255] scsi host7: usb-storage 4-2:1.0 [ 2.507312] usbcore: registered new interface driver usb-storage [ 2.510300] sd 6:0:0:0: [sda] Attached SCSI disk [ 2.510353] usbcore: registered new interface driver uas [ 2.605578] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.640246] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.640611] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.640823] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.673255] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 2.767367] usb 2-1.3: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00 [ 2.767371] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.767373] usb 2-1.3: Product: Portable Super Multi Drive [ 2.767374] usb 2-1.3: Manufacturer: Hitachi-LG Data Storage Inc [ 2.767375] usb 2-1.3: SerialNumber: ... [ 2.770383] usb-storage 2-1.3:1.0: USB Mass Storage device detected [ 2.782258] scsi host8: usb-storage 2-1.3:1.0 [ 2.831236] fbcon: i915drmfb (fb0) is primary device [ 2.846254] usb 2-1.6: new high-speed USB device number 4 using ehci-pci [ 2.924616] usb 2-1.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 [ 2.924618] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.924836] hub 2-1.6:1.0: USB hub found [ 2.924992] hub 2-1.6:1.0: 4 ports detected [ 2.926779] Console: switching to colour frame buffer device 240x67 [ 2.947001] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.059277] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 3.223254] usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci [ 3.321862] usb 2-1.6.1: New USB device found, idVendor=04d9, idProduct=a067, bcdDevice= 1.24 [ 3.321865] usb 2-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.321867] usb 2-1.6.1: Product: USB Gaming Mouse [ 3.321868] usb 2-1.6.1: Manufacturer: Holtek [ 3.333549] hid: raw HID events driver (C) Jiri Kosina [ 3.347269] usbcore: registered new interface driver usbhid [ 3.347272] usbhid: USB HID core driver [ 3.350704] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:04D9:A067.0001/input/input5 [ 3.402442] holtek_mouse 0003:04D9:A067.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:1d.0-1.6.1/input0 [ 3.402477] holtek_mouse 0003:04D9:A067.0002: Fixing up report descriptor [ 3.403229] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.1/0003:04D9:A067.0002/input/input6 [ 3.404258] usb 2-1.6.4: new full-speed USB device number 6 using ehci-pci [ 3.456272] holtek_mouse 0003:04D9:A067.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:1d.0-1.6.1/input1 [ 3.456480] holtek_mouse 0003:04D9:A067.0003: hiddev1,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:1d.0-1.6.1/input2 [ 3.496038] usb 2-1.6.4: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00 [ 3.496043] usb 2-1.6.4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.496273] hub 2-1.6.4:1.0: USB hub found [ 3.496393] hub 2-1.6.4:1.0: 4 ports detected [ 3.529978] scsi 7:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 3.530598] sd 7:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 3.531686] sd 7:0:0:0: [sdb] Write Protect is off [ 3.531688] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.532306] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.537526] sdb: sdb1 sdb2 [ 3.539079] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 3.769274] usb 2-XXX.XXX.XXX.XXX: new full-speed USB device number 7 using ehci-pci [ 3.790269] scsi 8:0:0:0: CD-ROM ASUS SDRW-08D2S-U A801 PQ: 0 ANSI: 0 [ 3.867792] usb 2-XXX.XXX.XXX.XXX: New USB device found, idVendor=04d9, idProduct=a02e, bcdDevice= 2.60 [ 3.867797] usb 2-XXX.XXX.XXX.XXX: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 3.867799] usb 2-XXX.XXX.XXX.XXX: Product: USB Keyboard [ 3.876424] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-XXX.XXX.XXX.XXX/2-XXX.XXX.XXX.XXX:XXX.0/0003:04D9:A02E.0004/input/input7 [ 4.535164] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.535168] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 4.535686] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.535688] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 4.557616] EDAC ie31200: No ECC support [ 4.557684] EDAC ie31200: No ECC support [ 4.583202] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210930/utaddress-204) [ 4.583209] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.583212] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210930/utaddress-204) [ 4.583215] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210930/utaddress-204) [ 4.583217] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.583218] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210930/utaddress-204) [ 4.583220] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210930/utaddress-204) [ 4.583222] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.583223] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210930/utaddress-204) [ 4.583226] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20210930/utaddress-204) [ 4.583228] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210930/utaddress-204) [ 4.583230] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.583231] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.601139] mlx4_core: Mellanox ConnectX core driver v4.0-0 [ 4.601151] mlx4_core: Initializing 0000:03:00.0 [ 4.605642] e1000e: Intel(R) PRO/1000 Network Driver [ 4.605645] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.605867] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.640304] sr 8:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.640309] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.649912] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock [ 4.652230] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 4.678737] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.688128] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.688450] i2c i2c-7: 2/4 memory slots populated (from DMI) [ 4.690328] i2c i2c-7: Successfully instantiated SPD at 0x51 [ 4.690781] i2c i2c-7: Successfully instantiated SPD at 0x53 [ 4.696170] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 6BEC68178EA05B88D7E70BA01F549A19 [ 4.698145] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.698953] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 4.699174] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.705030] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.705046] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.705049] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.705050] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.705051] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 4.705052] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.705053] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.705055] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.705056] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.727576] asus_wmi: ASUS WMI generic driver loaded [ 4.728723] asus_wmi: Initialization: 0x0 [ 4.728745] asus_wmi: BIOS WMI version: 0.9 [ 4.728774] asus_wmi: SFUN value: 0x0 [ 4.728776] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 4.729623] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12 [ 4.740072] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 4.740076] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 4.740077] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.740078] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 4.752783] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 4.772208] zram0: detected capacity change from 0 to 16289792 [ 4.798724] e1000e 0000:05:00.0 eth1: (PCI Express:2.5GT/s:Width x1) C235E5AFC8367C23DAED5EE08B4BD9DE [ 4.798728] e1000e 0000:05:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 4.798806] e1000e 0000:05:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 4.861036] Adding 8144892k swap on /dev/zram0. Priority:100 extents:1 across:8144892k SSDscFS [ 5.060677] iTCO_vendor_support: vendor-support=0 [ 5.070018] e1000e 0000:04:00.0 enp4s0: renamed from eth0 [ 5.071684] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 5.098245] at24 7-0051: supply vcc not found, using dummy regulator [ 5.098338] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 5.109296] at24 7-0051: 256 byte spd EEPROM, read-only [ 5.109332] at24 7-0053: supply vcc not found, using dummy regulator [ 5.110943] at24 7-0053: 256 byte spd EEPROM, read-only [ 5.143541] intel_rapl_common: Found RAPL domain package [ 5.143545] intel_rapl_common: Found RAPL domain core [ 5.143546] intel_rapl_common: Found RAPL domain uncore [ 5.143550] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 5.148490] e1000e 0000:05:00.0 enp5s0: renamed from eth1 [ 5.251200] FS-Cache: Loaded [ 5.299343] RPC: Registered named UNIX socket transport module. [ 5.299346] RPC: Registered udp transport module. [ 5.299347] RPC: Registered tcp transport module. [ 5.299347] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.349652] FS-Cache: Netfs 'nfs' registered for caching [ 5.586902] NFS: Registering the id_resolver key type [ 5.586912] Key type id_resolver registered [ 5.586913] Key type id_legacy registered [ 5.616276] FS-Cache: Duplicate cookie detected [ 5.616279] FS-Cache: O-cookie c=00000005 [p=00000002 fl=222 nc=0 na=1] FS-Cache: O-cookie d=00000000b7818c08{NFS.server} n=00000000c1c2c9e4 [ 5.616283] FS-Cache: O-key=[16] '040000000200000002000801c0a80103' [ 5.616290] FS-Cache: N-cookie c=00000007 [p=00000002 fl=2 nc=0 na=1] FS-Cache: N-cookie d=00000000b7818c08{NFS.server} n=0000000027948a38 [ 5.616293] FS-Cache: N-key=[16] '040000000200000002000801c0a80103' [ 5.627281] FS-Cache: Duplicate cookie detected [ 5.627283] FS-Cache: O-cookie c=00000005 [p=00000002 fl=222 nc=0 na=1] FS-Cache: O-cookie d=00000000b7818c08{NFS.server} n=00000000c1c2c9e4 [ 5.627288] FS-Cache: O-key=[16] '040000000200000002000801c0a80103' [ 5.627295] FS-Cache: N-cookie c=00000009 [p=00000002 fl=2 nc=0 na=1] FS-Cache: N-cookie d=00000000b7818c08{NFS.server} n=000000007bc35461 [ 5.627297] FS-Cache: N-key=[16] '040000000200000002000801c0a80103' [ 8.056315] e1000e 0000:04:00.0 enp4s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 8.056643] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 8.071129] NET: Registered PF_PACKET protocol family [ 12.070376] mlx4_core 0000:03:00.0: DMFS high rate steer mode is: disabled performance optimized steering [ 12.070734] mlx4_core 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 12.118547] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0 [ 12.122263] mlx4_en 0000:03:00.0: Activating port:1 [ 12.124475] mlx4_en: 0000:03:00.0: Port 1: Using 4 TX rings [ 12.124478] mlx4_en: 0000:03:00.0: Port 1: Using 4 RX rings [ 12.124966] mlx4_en: 0000:03:00.0: Port 1: Initializing port [ 12.125591] mlx4_en 0000:03:00.0: registered PHC clock [ 12.128647] mlx4_core 0000:03:00.0 enp3s0: renamed from eth0 [ 12.149727] mlx4_en: enp3s0: Steering Mode 1 [ 12.157058] mlx4_en: enp3s0: Link Down [ 14.585680] mlx4_en: enp3s0: Link Up [ 14.585726] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 14.617506] mlx4_en: enp3s0: Steering Mode 1 [ 14.638773] mlx4_en: enp3s0: Link Down [ 14.690366] mlx4_en: enp3s0: Link Up [ 425.614757] Non-volatile memory driver v1.3 [ 425.753715] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 425.851199] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 425.851256] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 425.851294] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 433.753541] Bluetooth: Core ver 2.22 [ 433.753566] NET: Registered PF_BLUETOOTH protocol family [ 433.753567] Bluetooth: HCI device and connection manager initialized [ 433.753571] Bluetooth: HCI socket layer initialized [ 433.753573] Bluetooth: L2CAP socket layer initialized [ 433.753575] Bluetooth: SCO socket layer initialized [ 434.635266] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 434.638315] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1056.679662] zram0: detected capacity change from 16289792 to 0