[ 0.000000] Linux version 6.1.0-13-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000beea7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000beea8000-0x00000000beeb7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000beeb8000-0x00000000bf30afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf30b000-0x00000000bf40afff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bf40b000-0x00000000bf512fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf513000-0x00000000bf51cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf51d000-0x00000000bf52ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf530000-0x00000000bf530fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf531000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffbc0000-0x00000000ffbfffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xbf416000 SMBIOS 3.0=0xbf414000 ACPI=0xbf52f000 ACPI 2.0=0xbf52f014 MEMATTR=0xbc019298 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Google Barla/Barla, BIOS MrChromebox-4.22.0 12/22/2023 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1597.063 MHz processor [ 0.001102] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001107] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001119] last_pfn = 0x12f000 max_arch_pfn = 0x400000000 [ 0.001327] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001621] last_pfn = 0xbf531 max_arch_pfn = 0x400000000 [ 0.008663] Using GB pages for direct mapping [ 0.009275] RAMDISK: [mem 0x2e641000-0x33317fff] ACPI: Early table checksum verification disabled [ 0.009292] ACPI: RSDP 0x00000000BF52F014 000024 (v02 COREv4) [ 0.009299] ACPI: XSDT 0x00000000BF52E0E8 000074 (v01 COREv4 COREBOOT 00000000 01000013) [ 0.009307] ACPI: FACP 0x00000000BF52D000 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009316] ACPI: DSDT 0x00000000BF529000 00379A (v02 COREv4 COREBOOT 00010001 INTL 20230628) [ 0.009321] ACPI: FACS 0x00000000BF559240 000040 [ 0.009325] ACPI: SSDT 0x00000000BF528000 000CE1 (v02 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009331] ACPI: MCFG 0x00000000BF527000 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009335] ACPI: TPM2 0x00000000BF526000 00004C (v04 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009340] ACPI: APIC 0x00000000BF525000 00006E (v03 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009345] ACPI: HEST 0x00000000BF524000 000028 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009349] ACPI: SSDT 0x00000000BF51F000 004B5B (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.009354] ACPI: VFCT 0x00000000BEEA8000 00FE68 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009358] ACPI: HPET 0x00000000BF51E000 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.009363] ACPI: BGRT 0x00000000BF51D000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.009367] ACPI: Reserving FACP table memory at [mem 0xbf52d000-0xbf52d113] ACPI: Reserving DSDT table memory at [mem 0xbf529000-0xbf52c799] ACPI: Reserving FACS table memory at [mem 0xbf559240-0xbf55927f] ACPI: Reserving SSDT table memory at [mem 0xbf528000-0xbf528ce0] ACPI: Reserving MCFG table memory at [mem 0xbf527000-0xbf52703b] ACPI: Reserving TPM2 table memory at [mem 0xbf526000-0xbf52604b] ACPI: Reserving APIC table memory at [mem 0xbf525000-0xbf52506d] ACPI: Reserving HEST table memory at [mem 0xbf524000-0xbf524027] ACPI: Reserving SSDT table memory at [mem 0xbf51f000-0xbf523b5a] ACPI: Reserving VFCT table memory at [mem 0xbeea8000-0xbeeb7e67] ACPI: Reserving HPET table memory at [mem 0xbf51e000-0xbf51e037] ACPI: Reserving BGRT table memory at [mem 0xbf51d000-0xbf51d037] No NUMA configuration found [ 0.009461] Faking a node at [mem 0x0000000000000000-0x000000012effffff] NODE_DATA(0) allocated [mem 0x12efd3000-0x12effdfff] Zone ranges: [ 0.009972] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000012effffff] Device empty [ 0.009981] Movable zone start for each node [ 0.009985] Early memory node ranges [ 0.009985] node 0: [mem 0x0000000000001000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x00000000beea7fff] node 0: [mem 0x00000000beeb8000-0x00000000bf30afff] node 0: [mem 0x00000000bf513000-0x00000000bf51cfff] node 0: [mem 0x00000000bf530000-0x00000000bf530fff] node 0: [mem 0x0000000100000000-0x000000012effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010051] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.022523] On node 0, zone DMA32: 16 pages in unavailable ranges [ 0.022537] On node 0, zone DMA32: 520 pages in unavailable ranges [ 0.022539] On node 0, zone DMA32: 19 pages in unavailable ranges [ 0.023120] On node 0, zone Normal: 2767 pages in unavailable ranges [ 0.023198] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.023263] ACPI: PM-Timer IO Port: 0x418 [ 0.023272] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.023282] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.023287] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.023290] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.023293] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.023299] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.023301] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.023316] e820: update [mem 0xbbef5000-0xbbf19fff] usable ==> reserved [ 0.023334] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.023357] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbbef5000-0xbbf19fff] PM: hibernation: Registered nosave memory: [mem 0xbeea8000-0xbeeb7fff] PM: hibernation: Registered nosave memory: [mem 0xbf30b000-0xbf40afff] PM: hibernation: Registered nosave memory: [mem 0xbf40b000-0xbf512fff] PM: hibernation: Registered nosave memory: [mem 0xbf51d000-0xbf52ffff] PM: hibernation: Registered nosave memory: [mem 0xbf531000-0xcfffffff] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xffbbffff] PM: hibernation: Registered nosave memory: [mem 0xffbc0000-0xffbfffff] PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff] [mem 0xd0000000-0xffbbffff] available for PCI devices [ 0.023384] Booting paravirtualized kernel on bare hardware [ 0.023387] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028813] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.029389] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u1048576 [ 0.029399] pcpu-alloc: s212992 r8192 d28672 u1048576 alloc=1*2097152 [ 0.029403] pcpu-alloc: [0] 0 1 [ 0.029448] Fallback order for Node 0: 0 [ 0.029453] Built 1 zonelists, mobility grouping on. Total pages: 958073 [ 0.029456] Policy zone: Normal [ 0.029584] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64", will be passed to user space. [ 0.029629] random: crng init done [ 0.030611] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.031104] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.031140] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.031147] software IO TLB: area num 2. [ 0.083108] Memory: 2994708K/3902100K available (14342K kernel code, 2329K rwdata, 9132K rodata, 2772K init, 17416K bss, 337252K reserved, 0K cma-reserved) [ 0.083319] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.083363] ftrace: allocating 40153 entries in 157 pages [ 0.095957] ftrace: allocated 157 pages with 5 groups [ 0.097158] Dynamic Preempt: voluntary [ 0.097202] rcu: Preemptible hierarchical RCU implementation. [ 0.097204] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.097207] Trampoline variant of Tasks RCU enabled. [ 0.097208] Rude variant of Tasks RCU enabled. [ 0.097209] Tracing variant of Tasks RCU enabled. [ 0.097210] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097211] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.104710] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16 [ 0.104917] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.105001] Console: colour dummy device 80x25 [ 0.105023] printk: console [tty0] enabled [ 0.105050] ACPI: Core revision 20220331 [ 0.105205] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.105225] APIC: Switch to symmetric I/O mode setup [ 0.105572] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.125225] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17054e90df9, max_idle_ns: 440795264138 ns [ 0.125237] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.12 BogoMIPS (lpj=6388252) [ 0.125254] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable. [ 0.125310] LVT offset 1 assigned for vector 0xf9 [ 0.125322] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.125324] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.125329] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.125333] Spectre V2 : Mitigation: Retpolines [ 0.125334] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.125336] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.125337] RETBleed: Mitigation: untrained return thunk [ 0.125340] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.125348] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.125350] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.125352] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.125354] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.125357] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.136062] Freeing SMP alternatives memory: 36K [ 0.136071] pid_max: default: 32768 minimum: 301 [ 0.140528] LSM: Security Framework initializing [ 0.140554] landlock: Up and running. [ 0.140556] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.140606] AppArmor: AppArmor initialized [ 0.140610] TOMOYO Linux initialized [ 0.140620] LSM support for eBPF active [ 0.140674] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.140696] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.141355] smpboot: CPU 0 Converting physical 2 to logical die 0 [ 0.250849] smpboot: CPU0: AMD A4-9120C RADEON R4, 5 COMPUTE CORES 2C+3G (family: 0x15, model: 0x70, stepping: 0x0) [ 0.251093] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251095] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.251132] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251134] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.251162] cblist_init_generic: Setting adjustable number of callback queues. [ 0.251164] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.251191] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.251232] ... version: 0 [ 0.251233] ... bit width: 48 [ 0.251234] ... generic registers: 6 [ 0.251235] ... value mask: 0000ffffffffffff [ 0.251237] ... max period: 00007fffffffffff [ 0.251238] ... fixed-purpose events: 0 [ 0.251240] ... event mask: 000000000000003f [ 0.251395] signal: max sigframe size: 1776 [ 0.251432] rcu: Hierarchical SRCU implementation. [ 0.251434] rcu: Max phase no-delay instances is 1000. [ 0.251894] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.251968] smp: Bringing up secondary CPUs ... [ 0.252148] x86: Booting SMP configuration: [ 0.252149] .... node #0, CPUs: #1 [ 0.253229] smp: Brought up 1 node, 2 CPUs [ 0.253229] smpboot: Max logical packages: 1 [ 0.253229] smpboot: Total of 2 processors activated (6388.25 BogoMIPS) [ 0.255756] node 0 deferred pages initialised in 0ms [ 0.255813] devtmpfs: initialized [ 0.255813] x86/mm: Memory block size: 128MB [ 0.257351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.257356] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.257419] pinctrl core: initialized pinctrl subsystem [ 0.259004] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.259345] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.259489] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.259627] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.259765] thermal_sys: Registered thermal governor 'fair_share' [ 0.259765] thermal_sys: Registered thermal governor 'bang_bang' [ 0.259765] thermal_sys: Registered thermal governor 'step_wise' [ 0.259765] thermal_sys: Registered thermal governor 'user_space' [ 0.259765] thermal_sys: Registered thermal governor 'power_allocator' [ 0.259765] cpuidle: using governor ladder [ 0.259765] cpuidle: using governor menu [ 0.259765] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.259765] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.259765] PCI: not using MMCONFIG [ 0.259765] PCI: Using configuration type 1 for base access [ 0.259765] PCI: Using configuration type 1 for extended access [ 0.262292] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.285259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.285264] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.285267] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.285269] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.289230] ACPI: Added _OSI(Module Device) [ 0.289230] ACPI: Added _OSI(Processor Device) [ 0.289230] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.289230] ACPI: Added _OSI(Processor Aggregator Device) [ 0.291418] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.297564] ACPI: EC: EC started [ 0.297566] ACPI: EC: interrupt blocked [ 0.297679] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.297683] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.297685] ACPI: Interpreter enabled [ 0.297709] ACPI: PM: (supports S0 S1 S3 S4 S5) [ 0.297711] ACPI: Using IOAPIC for interrupt routing [ 0.297739] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.297942] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.297955] HEST: Table parsing has been initialized. [ 0.297971] GHES: Failed to enable APEI firmware first mode. [ 0.297975] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.297977] PCI: Ignoring E820 reservations for host bridge windows [ 0.298208] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.298888] ACPI: PM: Power Resource [P0U2] ACPI: PM: Power Resource [P3U2] ACPI: PM: Power Resource [P0U3] ACPI: PM: Power Resource [P3U3] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.300319] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] PCI host bridge to bus 0000:00 [ 0.300639] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff] pci_bus 0000:00: root bus resource [bus 00-3f] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000 [ 0.300834] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000 [ 0.300849] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:01.0: reg 0x18: [mem 0xe0000000-0xe07fffff 64bit pref] pci 0000:00:01.0: reg 0x20: [io 0x1000-0x10ff] pci 0000:00:01.0: reg 0x24: [mem 0xe0d00000-0xe0d3ffff] pci 0000:00:01.0: reg 0x30: [mem 0xe0d40000-0xe0d5ffff pref] pci 0000:00:01.0: enabling Extended Tags [ 0.300900] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.300905] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:01.0: supports D1 D2 [ 0.300942] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.301075] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300 [ 0.301089] pci 0000:00:01.1: reg 0x10: [mem 0xe0d80000-0xe0d83fff 64bit] pci 0000:00:01.1: enabling Extended Tags [ 0.301152] pci 0000:00:01.1: supports D1 D2 [ 0.301235] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000 [ 0.301318] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400 [ 0.301356] pci 0000:00:02.2: enabling Extended Tags [ 0.301404] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.301533] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400 [ 0.301571] pci 0000:00:02.4: enabling Extended Tags [ 0.301618] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.301744] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000 [ 0.301843] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000 [ 0.301855] pci 0000:00:08.0: reg 0x10: [mem 0xe0d60000-0xe0d7ffff 64bit pref] pci 0000:00:08.0: reg 0x18: [mem 0xe0b00000-0xe0bfffff] pci 0000:00:08.0: reg 0x1c: [mem 0xe0d88000-0xe0d88fff] pci 0000:00:08.0: reg 0x20: [mem 0xe0c00000-0xe0cfffff] pci 0000:00:08.0: reg 0x24: [mem 0xe0d84000-0xe0d85fff] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000 [ 0.302064] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330 [ 0.302088] pci 0000:00:10.0: reg 0x10: [mem 0xe0d86000-0xe0d87fff 64bit] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.302332] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320 [ 0.302349] pci 0000:00:12.0: reg 0x10: [mem 0xe0d89000-0xe0d890ff] pci 0000:00:12.0: supports D1 D2 [ 0.302429] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.302541] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.302686] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.302875] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501 [ 0.302895] pci 0000:00:14.7: reg 0x10: [mem 0xe0d8a000-0xe0d8a0ff 64bit] pci 0000:00:14.7: PME# supported from D3cold [ 0.303064] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000 [ 0.303140] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000 [ 0.303206] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000 [ 0.303282] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000 [ 0.303352] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000 [ 0.303417] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000 [ 0.303665] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 [ 0.303783] pci 0000:01:00.0: reg 0x10: [mem 0xe0800000-0xe09fffff 64bit] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.305187] pci 0000:00:02.2: PCI bridge to [bus 01] pci 0000:00:02.2: bridge window [mem 0xe0800000-0xe09fffff] pci 0000:02:00.0: [1217:8620] type 00 class 0x080501 [ 0.305390] pci 0000:02:00.0: reg 0x10: [mem 0xe0a00000-0xe0a00fff] pci 0000:02:00.0: reg 0x14: [mem 0xe0a01000-0xe0a017ff] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.321464] pci 0000:00:02.4: PCI bridge to [bus 02] pci 0000:00:02.4: bridge window [mem 0xe0a00000-0xe0afffff] ACPI: PCI: Interrupt link INTA configured for IRQ 3 [ 0.322496] ACPI: PCI: Interrupt link INTB configured for IRQ 4 [ 0.322545] ACPI: PCI: Interrupt link INTC configured for IRQ 5 [ 0.322593] ACPI: PCI: Interrupt link INTD configured for IRQ 7 [ 0.322640] ACPI: PCI: Interrupt link INTE configured for IRQ 11 [ 0.322687] ACPI: PCI: Interrupt link INTF configured for IRQ 0 [ 0.322733] ACPI: PCI: Interrupt link INTG configured for IRQ 0 [ 0.322780] ACPI: PCI: Interrupt link INTH configured for IRQ 0 [ 0.323795] ACPI: EC: interrupt unblocked [ 0.323798] ACPI: EC: event unblocked [ 0.323802] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.323804] ACPI: EC: GPE=0x3 [ 0.323807] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.323810] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.325238] iommu: Default domain type: Translated [ 0.325238] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.328271] pps_core: LinuxPPS API ver. 1 registered [ 0.328274] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.328279] PTP clock support registered [ 0.328297] EDAC MC: Ver: 3.0.0 [ 0.329235] Registered efivars operations [ 0.329509] NetLabel: Initializing [ 0.329511] NetLabel: domain hash size = 128 [ 0.329513] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.329535] NetLabel: unlabeled traffic allowed by default [ 0.329537] PCI: Using ACPI for IRQ routing [ 0.330941] PCI: pci_cache_line_size set to 64 bytes [ 0.331159] e820: reserve RAM buffer [mem 0xbbef5000-0xbbffffff] e820: reserve RAM buffer [mem 0xbeea8000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf30b000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf51d000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf531000-0xbfffffff] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.333265] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.333265] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.333265] vgaarb: loaded [ 0.333323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.333331] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.333331] clocksource: Switched to clocksource tsc-early [ 0.352166] VFS: Disk quotas dquot_6.6.0 [ 0.352193] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.352443] AppArmor: AppArmor Filesystem Enabled [ 0.352479] pnp: PnP ACPI init [ 0.352611] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.352779] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.352784] system 00:01: [mem 0xfec20000-0xfec20fff] could not be reserved [ 0.352949] system 00:04: [io 0x0900-0x09fe] has been reserved [ 0.353012] system 00:05: [io 0x0200] has been reserved [ 0.353015] system 00:05: [io 0x0204] has been reserved [ 0.353018] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.353020] system 00:05: [io 0x0880-0x08ff] has been reserved [ 0.353447] pnp: PnP ACPI: found 7 devices [ 0.360508] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.360616] NET: Registered PF_INET protocol family [ 0.360793] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.362611] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.362700] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.362778] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.363080] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.363237] TCP: Hash tables configured (established 32768 bind 32768) [ 0.363381] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.363429] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.363458] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.363534] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.363547] NET: Registered PF_XDP protocol family [ 0.363574] pci 0000:00:02.2: PCI bridge to [bus 01] pci 0000:00:02.2: bridge window [mem 0xe0800000-0xe09fffff] pci 0000:00:02.4: PCI bridge to [bus 02] pci 0000:00:02.4: bridge window [mem 0xe0a00000-0xe0afffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff] pci_bus 0000:01: resource 1 [mem 0xe0800000-0xe09fffff] pci_bus 0000:02: resource 1 [mem 0xe0a00000-0xe0afffff] pci 0000:00:01.0: disabling ATS [ 0.363742] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 0.364013] pci 0000:00:10.0: PME# does not work under D0, disabling it [ 0.364289] PCI: CLS 64 bytes, default 64 [ 0.364304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.364306] software IO TLB: mapped [mem 0x00000000b7ef5000-0x00000000bbef5000] (64MB) [ 0.364379] LVT offset 0 assigned for vector 0x400 [ 0.364418] perf: AMD IBS detected (0x000007ff) [ 0.364429] Trying to unpack rootfs image as initramfs... [ 0.365356] Initialise system trusted keyrings [ 0.365384] Key type blacklist registered [ 0.369650] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.372983] zbud: loaded [ 0.373461] integrity: Platform Keyring initialized [ 0.373473] integrity: Machine keyring initialized [ 0.373476] Key type asymmetric registered [ 0.373479] Asymmetric key parser 'x509' registered [ 1.388323] tsc: Refined TSC clocksource calibration: 1597.002 MHz [ 1.388339] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170514dcf86, max_idle_ns: 440795282824 ns [ 1.388440] clocksource: Switched to clocksource tsc [ 1.475434] Freeing initrd memory: 78684K [ 1.483675] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.483722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.483782] io scheduler mq-deadline registered [ 1.486026] pcieport 0000:00:02.2: PME: Signaling with IRQ 25 [ 1.486217] pcieport 0000:00:02.4: PME: Signaling with IRQ 26 [ 1.486356] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.486430] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.486438] ACPI: \_SB_.P000: Found 2 idle states [ 1.486556] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.486567] ACPI: \_SB_.P001: Found 2 idle states [ 1.487277] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.487280] ACPI: thermal: Thermal Zone [THRM] (31 C) [ 1.487545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.488149] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A [ 1.488508] Linux agpgart interface v0.103 [ 1.488607] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.488873] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.488877] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.489303] i8042: Warning: Keylock active [ 1.489439] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.489566] mousedev: PS/2 mouse device common for all mice [ 1.489605] rtc_cmos 00:02: RTC can wake from S4 [ 1.489846] rtc_cmos 00:02: registered as rtc0 [ 1.489874] rtc_cmos 00:02: setting system clock to 2024-01-16T12:11:18 UTC (1705407078) [ 1.489914] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.489957] ledtrig-cpu: registered to indicate activity on CPUs [ 1.490086] efifb: probing for efifb [ 1.490099] efifb: framebuffer at 0xd0000000, using 4224k, total 4224k [ 1.490102] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.490104] efifb: scrolling: redraw [ 1.490105] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.490228] Console: switching to colour frame buffer device 170x48 [ 1.491466] fb0: EFI VGA frame buffer device [ 1.492083] simple-framebuffer simple-framebuffer.0: simplefb: cannot reserve video memory at [mem 0xd0000000-0xd041ffff] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x420000 bytes [ 1.492099] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5632 [ 1.492103] simple-framebuffer simple-framebuffer.0: Unable to register simplefb: -16 [ 1.492127] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 [ 1.495659] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.514327] NET: Registered PF_INET6 protocol family [ 1.522345] Segment Routing with IPv6 [ 1.522368] In-situ OAM (IOAM) with IPv6 [ 1.522412] mip6: Mobile IPv6 [ 1.522421] NET: Registered PF_PACKET protocol family [ 1.522467] mpls_gso: MPLS GSO support [ 1.522472] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.522763] microcode: CPU0: patch_level=0x06006704 [ 1.522772] microcode: CPU1: patch_level=0x06006704 [ 1.522777] microcode: Microcode Update Driver: v2.2. [ 1.522786] IPI shorthand broadcast: enabled [ 1.522825] sched_clock: Marking stable (1522354243, 286153)->(1527964607, -5324211) [ 1.523047] registered taskstats version 1 [ 1.523062] Loading compiled-in X.509 certificates [ 1.554596] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.554620] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.555048] zswap: loaded using pool lzo/zbud [ 1.555312] Key type .fscrypt registered [ 1.555314] Key type fscrypt-provisioning registered [ 1.562764] Key type encrypted registered [ 1.562773] AppArmor: AppArmor sha1 policy hashing enabled [ 1.562839] integrity: Loading X.509 certificate: UEFI:db [ 1.562892] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.562894] integrity: Loading X.509 certificate: UEFI:db [ 1.562924] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.564686] ima: No TPM chip found, activating TPM-bypass! [ 1.564690] ima: Allocated hash algorithm: sha256 [ 1.564708] ima: No architecture policies found [ 1.564733] evm: Initialising EVM extended attributes: [ 1.564734] evm: security.selinux [ 1.564736] evm: security.SMACK64 (disabled) [ 1.564737] evm: security.SMACK64EXEC (disabled) [ 1.564738] evm: security.SMACK64TRANSMUTE (disabled) [ 1.564740] evm: security.SMACK64MMAP (disabled) [ 1.564741] evm: security.apparmor [ 1.564742] evm: security.ima [ 1.564743] evm: security.capability [ 1.564744] evm: HMAC attrs: 0x1 [ 1.732892] Freeing unused decrypted memory: 2036K [ 1.733929] Freeing unused kernel image (initmem) memory: 2772K [ 1.744549] Write protecting the kernel read-only data: 26624k [ 1.745470] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.745906] Freeing unused kernel image (rodata/data gap) memory: 1108K [ 1.846913] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.846927] Run /init as init process [ 1.846930] with arguments: [ 1.846932] /init [ 1.846933] with environment: [ 1.846934] HOME=/ [ 1.846935] TERM=linux [ 1.846937] BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 [ 2.105402] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input1 [ 2.117281] ACPI: battery: Slot [BAT0] (battery present) [ 2.120534] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.120963] ACPI: button: Power Button [PWRF] ACPI: video: Video Device [IGFX] (multi-head: no rom: yes post: no) [ 2.121247] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 2.163800] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.163809] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 2.163919] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.201110] cryptd: max_cpu_qlen set to 1000 [ 2.206114] sdhci: Secure Digital Host Controller Interface driver [ 2.206121] sdhci: Copyright(c) Pierre Ossman [ 2.233338] ACPI: bus type drm_connector registered [ 2.234610] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1) [ 2.235378] AVX2 version of gcm_enc/dec engaged. [ 2.235428] AES CTR mode by8 optimization enabled [ 2.248884] ACPI: bus type USB registered [ 2.249239] usbcore: registered new interface driver usbfs [ 2.249323] usbcore: registered new interface driver hub [ 2.249353] usbcore: registered new device driver usb [ 2.266319] ehci-pci 0000:00:12.0: EHCI Host Controller [ 2.266333] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.266350] ehci-pci 0000:00:12.0: debug port 2 [ 2.266411] ehci-pci 0000:00:12.0: irq 18, io mem 0xe0d89000 [ 2.280538] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 2.280677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.280683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.280687] usb usb1: Product: EHCI Host Controller [ 2.280690] usb usb1: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd [ 2.280693] usb usb1: SerialNumber: ... [ 2.280962] hub 1-0:1.0: USB hub found [ 2.280978] hub 1-0:1.0: 2 ports detected [ 2.294058] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.294075] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.294268] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410 [ 2.294693] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.294704] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 2.294711] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.302427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.302435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.302438] usb usb2: Product: xHCI Host Controller [ 2.302441] usb usb2: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 2.302443] usb usb2: SerialNumber: ... [ 2.302742] hub 2-0:1.0: USB hub found [ 2.302759] hub 2-0:1.0: 4 ports detected [ 2.302986] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.303027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 2.303031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.303034] usb usb3: Product: xHCI Host Controller [ 2.303036] usb usb3: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 2.303038] usb usb3: SerialNumber: ... [ 2.303182] hub 3-0:1.0: USB hub found [ 2.303198] hub 3-0:1.0: 4 ports detected [ 2.363517] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit [ 2.363569] sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8620] (rev 1) [ 2.363901] mmc1: emmc 1.8v flag is set, force 1.8v signaling voltage [ 2.366629] mmc1: SDHCI controller on PCI [0000:02:00.0] using ADMA [ 2.584345] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.640309] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 2.807075] usb 2-3: New USB device found, idVendor=174c, idProduct=225c, bcdDevice= 0.01 [ 2.807085] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.807089] usb 2-3: Product: AS2235 [ 2.807092] usb 2-3: Manufacturer: ASMedia [ 2.807094] usb 2-3: SerialNumber: ... [ 3.599219] mmc1: new HS200 MMC card at address 0001 [ 5.773338] [drm] amdgpu kernel modesetting enabled. [ 5.773607] amdgpu: CRAT table not found [ 5.773612] amdgpu: Virtual CRAT table created for CPU [ 5.773643] amdgpu: Topology: Add CPU node [ 5.774030] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1002:0x1EB0 0xEB). [ 5.774357] [drm] register mmio base: 0xE0D00000 [ 5.774360] [drm] register mmio size: 262144 [ 5.779433] mmcblk1: mmc1:0001 hA8aP> 14.7 GiB [ 5.781588] [drm] add ip block number 0 <vi_common> [ 5.781596] [drm] add ip block number 1 <gmc_v8_0> [ 5.781598] [drm] add ip block number 2 <cz_ih> [ 5.781600] [drm] add ip block number 3 <gfx_v8_0> [ 5.781602] [drm] add ip block number 4 <sdma_v3_0> [ 5.781603] [drm] add ip block number 5 <powerplay> [ 5.781605] [drm] add ip block number 6 <dm> [ 5.781607] [drm] add ip block number 7 <uvd_v6_0> [ 5.781609] [drm] add ip block number 8 <vce_v3_0> [ 5.781611] [drm] add ip block number 9 <acp_ip> [ 5.781616] kfd kfd: amdgpu: STONEY not supported in kfd [ 5.781680] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from VFCT [ 5.781685] amdgpu: ATOM BIOS: 113-C91400-X09 [ 5.781708] [drm] UVD is enabled in physical mode [ 5.781711] [drm] VCE enabled in VM mode [ 5.782431] Console: switching to colour dummy device 80x25 [ 5.782482] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 5.782487] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 5.782544] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 5.782552] amdgpu 0000:00:01.0: amdgpu: VRAM: 256M 0x000000F400000000 - 0x000000F40FFFFFFF (256M used) [ 5.782557] amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 5.782566] [drm] Detected VRAM RAM=256M, BAR=256M [ 5.782568] [drm] RAM width 64bits UNKNOWN [ 5.782644] [drm] amdgpu: 256M of VRAM memory ready [ 5.782647] [drm] amdgpu: 3072M of GTT memory ready. [ 5.782668] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.782713] [drm] PCIE GART of 1024M enabled (table at 0x000000F400600000). [ 5.782979] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_pfp.bin [ 5.783031] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_me.bin [ 5.783069] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_ce.bin [ 5.783119] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_rlc.bin [ 5.783330] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_mec.bin [ 5.784722] mmcblk1: p1 p2 [ 5.785665] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_sdma.bin [ 5.785701] amdgpu: hwmgr_sw_init smu backed is smu8_smu [ 5.785863] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18 [ 5.785868] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 5.786214] hub 1-1:1.0: USB hub found [ 5.787171] hub 1-1:1.0: 4 ports detected [ 5.788663] mmcblk1boot0: mmc1:0001 hA8aP> 4.00 MiB [ 5.789547] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_uvd.bin [ 5.789562] [drm] Found UVD firmware Version: 1.43 Family ID: 15 [ 5.789642] [drm] UVD ENC is disabled [ 5.789988] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_vce.bin [ 5.789997] [drm] Found VCE firmware Version: 52.0 Binary ID: 3 [ 5.791143] mmcblk1boot1: mmc1:0001 hA8aP> 4.00 MiB [ 5.794635] amdgpu: smu version 33.10.00 [ 5.796547] SCSI subsystem initialized [ 5.799694] mmcblk1rpmb: mmc1:0001 hA8aP> 16.0 MiB, chardev (242:0) [ 5.802858] usb-storage 2-3:1.0: USB Mass Storage device detected [ 5.807383] scsi host0: usb-storage 2-3:1.0 [ 5.807563] usbcore: registered new interface driver usb-storage [ 5.808578] [drm] DM_PPLIB: values for Engine clock [ 5.808585] [drm] DM_PPLIB: 200000 [ 5.808588] [drm] DM_PPLIB: 300000 [ 5.808589] [drm] DM_PPLIB: 400000 [ 5.808591] [drm] DM_PPLIB: 450000 [ 5.808592] [drm] DM_PPLIB: 496560 [ 5.808593] [drm] DM_PPLIB: 533340 [ 5.808595] [drm] DM_PPLIB: 576000 [ 5.808596] [drm] DM_PPLIB: 600000 [ 5.808598] [drm] DM_PPLIB: Validation clocks: [ 5.808599] [drm] DM_PPLIB: engine_max_clock: 60000 [ 5.808601] [drm] DM_PPLIB: memory_max_clock: 93300 [ 5.808602] [drm] DM_PPLIB: level : 8 [ 5.808605] [drm] DM_PPLIB: values for Display clock [ 5.808607] [drm] DM_PPLIB: 300000 [ 5.808608] [drm] DM_PPLIB: 400000 [ 5.808609] [drm] DM_PPLIB: 496560 [ 5.808610] [drm] DM_PPLIB: 626090 [ 5.808611] [drm] DM_PPLIB: 685720 [ 5.808612] [drm] DM_PPLIB: 757900 [ 5.808613] [drm] DM_PPLIB: 800000 [ 5.808614] [drm] DM_PPLIB: 847060 [ 5.808616] [drm] DM_PPLIB: Validation clocks: [ 5.808616] [drm] DM_PPLIB: engine_max_clock: 60000 [ 5.808618] [drm] DM_PPLIB: memory_max_clock: 93300 [ 5.808619] [drm] DM_PPLIB: level : 8 [ 5.808621] [drm] DM_PPLIB: values for Memory clock [ 5.808622] [drm] DM_PPLIB: 667000 [ 5.808623] [drm] DM_PPLIB: 933000 [ 5.808625] [drm] DM_PPLIB: Validation clocks: [ 5.808626] [drm] DM_PPLIB: engine_max_clock: 60000 [ 5.808627] [drm] DM_PPLIB: memory_max_clock: 93300 [ 5.808628] [drm] DM_PPLIB: level : 8 [ 5.808840] [drm] Display Core initialized with v3.2.207! [ 5.810881] usbcore: registered new interface driver uas [ 5.923312] [drm] UVD initialized successfully. [ 6.023549] [drm] VCE initialized successfully. [ 6.024243] amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 3, active_cu_number 3 [ 6.026662] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:00:01.0 on minor 0 [ 6.034016] fbcon: amdgpudrmfb (fb0) is primary device [ 6.076484] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 6.186667] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01 [ 6.186674] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.779869] Console: switching to colour frame buffer device 170x48 [ 6.813166] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device [ 6.833977] scsi 0:0:0:0: Direct-Access ASMT 2235 0 PQ: 0 ANSI: 6 [ 6.856073] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 6.857114] sd 0:0:0:0: [sda] Write Protect is off [ 6.857118] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 6.858112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.915636] sda: sda1 sda2 sda3 sda4 sda5 [ 6.916019] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.492290] raid6: avx2x4 gen() 9335 MB/s [ 8.560289] raid6: avx2x2 gen() 8256 MB/s [ 8.628290] raid6: avx2x1 gen() 9362 MB/s [ 8.628293] raid6: using algorithm avx2x1 gen() 9362 MB/s [ 8.696290] raid6: .... xor() 5515 MB/s, rmw enabled [ 8.696293] raid6: using avx2x2 recovery algorithm [ 8.699001] xor: automatically using best checksumming function avx [ 8.699955] async_tx: api initialized (async) [ 9.266374] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 10.065724] PM: Image not found (code -22) [ 12.340261] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 21.097264] pstore: Using crash dump compression: deflate [ 21.097782] pstore: Registered efi as persistent store backend [ 21.178304] loop: module loaded [ 21.262046] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 21.279254] fuse: init (API version 7.37) [ 21.640912] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 21.640974] device-mapper: uevent: version 1.0.3 [ 21.641120] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 21.988027] Adding 5818364k swap on /swap/swap. Priority:-2 extents:5 across:60868604k FS [ 22.239422] lp: driver loaded but no devices found [ 22.356067] ppdev: user-space parallel port driver [ 22.568402] RPC: Registered named UNIX socket transport module. [ 22.568409] RPC: Registered udp transport module. [ 22.568410] RPC: Registered tcp transport module. [ 22.568412] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 26.651666] cr50_i2c i2c-GOOG0005:00: cr50 TPM 2.0 (i2c 0x50 irq 35 id 0x28) [ 26.795898] acpi_cpufreq: overriding BIOS provided _PSD data [ 26.800615] elan_i2c i2c-ELAN0000:00: supply vcc not found, using dummy regulator [ 26.877709] ACPI: AC: AC Adapter [AC] (on-line) [ 26.921632] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x00b4, Firmware: 0x0002, Sample: 0x0002, IAP: 0x000e [ 26.921944] input: Elan Touchpad as /devices/platform/AMD0010:02/i2c-2/i2c-ELAN0000:00/input/input4 [ 27.073754] cros-usbpd-notify-acpi GOOG0003:00: Couldn't get Chrome EC device pointer. [ 27.553599] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 27.553764] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 27.554158] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 28.487023] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 28.521603] gsmi: no gsmi handler in firmware [ 28.671802] da7219 i2c-DLGS7219:00: Using default DAI clk names: da7219-dai-wclk, da7219-dai-bclk [ 28.796085] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 28.800258] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 [ 28.800684] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 [ 29.937286] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 29.937645] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 29.937963] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 29.938278] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 30.160775] SVM: TSC scaling supported [ 30.160783] kvm: Nested Virtualization enabled [ 30.160786] SVM: kvm: Nested Paging enabled [ 30.160795] SVM: Virtual VMLOAD VMSAVE supported [ 30.160797] SVM: Virtual GIF supported [ 30.160799] SVM: LBR virtualization supported [ 30.268308] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 30.290260] MCE: In-kernel MCE decoding enabled. [ 30.412141] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 31.359589] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 31.691362] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:01:00.0.bin (-2) [ 31.691385] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 31.691424] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:01:00.0.bin (-2) [ 31.691459] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/cal-pci-0000:01:00.0.bin (-2) [ 31.691476] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/cal-pci-0000:01:00.0.bin (-2) [ 32.080883] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin [ 32.080908] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1435 [ 32.080918] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 32.082084] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c [ 32.365482] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin [ 32.366729] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 32.459689] ath10k_pci 0000:01:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 32.537822] ath: EEPROM regdomain: 0x6c [ 32.537831] ath: EEPROM indicates we should expect a direct regpair map [ 32.537834] ath: Country alpha2 being used: 00 [ 32.537837] ath: Regpair used: 0x6c [ 32.611443] wl: loading out-of-tree module taints kernel. [ 32.611456] wl: module license 'MIXED/Proprietary' taints kernel. [ 32.611458] Disabling lock debugging due to kernel taint [ 32.619879] wl: module verification failed: signature and/or required key missing - tainting kernel [ 33.066118] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 34.199814] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 35.228589] Adding 5119996k swap on /dev/sda4. Priority:-3 extents:1 across:5119996k FS [ 35.386010] Bluetooth: Core ver 2.22 [ 35.386063] NET: Registered PF_BLUETOOTH protocol family [ 35.386065] Bluetooth: HCI device and connection manager initialized [ 35.386075] Bluetooth: HCI socket layer initialized [ 35.386897] Bluetooth: L2CAP socket layer initialized [ 35.386919] Bluetooth: SCO socket layer initialized [ 35.625899] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 35.791668] usbcore: registered new interface driver btusb [ 35.942622] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 35.942638] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 35.942641] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 36.354194] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 36.354213] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 36.382647] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 37.571248] ZFS: Loaded module v2.1.12-1~mx23+1, ZFS pool version 5000, ZFS filesystem version 5 [ 43.324424] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ 47.477301] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7 [ 56.234687] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 56.234695] Bluetooth: BNEP filters: protocol multicast [ 56.234702] Bluetooth: BNEP socket layer initialized [ 56.238740] Bluetooth: MGMT ver 1.22 [ 56.379683] NET: Registered PF_ALG protocol family [ 67.090591] NET: Registered PF_QIPCRTR protocol family [ 72.161396] wlan0: authenticate with A9D41F200CDE5F557FB8C91C477F1393 [ 72.211870] wlan0: send auth to A9D41F200CDE5F557FB8C91C477F1393 (try 1/3) [ 72.213269] wlan0: authenticated [ 72.216532] wlan0: associate with A9D41F200CDE5F557FB8C91C477F1393 (try 1/3) [ 72.235924] wlan0: RX AssocResp from A9D41F200CDE5F557FB8C91C477F1393 (capab=0x11 status=0 aid=1) [ 72.239124] wlan0: associated [ 72.239389] ath: EEPROM regdomain: 0x8348 [ 72.239396] ath: EEPROM indicates we should expect a country code [ 72.239400] ath: doing EEPROM country->regdmn map search [ 72.239403] ath: country maps to regdmn code: 0x3a [ 72.239406] ath: Country alpha2 being used: US [ 72.239409] ath: Regpair used: 0x3a [ 72.239413] ath: regdomain 0x8348 dynamically updated by country element [ 72.496924] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 75.119889] NFSD: Using nfsdcld client tracking operations. [ 75.119901] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 75.427616] vboxdrv: Found 2 processor cores/threads [ 75.449025] vboxdrv: TSC mode is Invariant, tentative frequency 1596998563 Hz [ 75.449036] vboxdrv: Successfully loaded version 7.0.10_Debian r158379 (interface 0x00330004) [ 75.723988] VBoxNetFlt: Successfully started. [ 75.911777] VBoxNetAdp: Successfully started. [ 100.413397] Bluetooth: RFCOMM TTY layer initialized [ 100.413412] Bluetooth: RFCOMM socket layer initialized [ 100.413426] Bluetooth: RFCOMM ver 1.11 [ 286.894728] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 312.734907] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 367.839114] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 415.911550] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 439.823568] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 466.847488] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 515.995655] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 544.931693] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 569.874613] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 634.779781] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 682.188871] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 708.672016] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 829.859352] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 854.032818] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 878.864670] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 902.928735] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 910.940660] SUPR0GipMap: fGetGipCpu=0x2a [ 914.419899] vboxdrv: 00000000ffd8d5f7 VMMR0.r0 [ 914.907596] vboxdrv: 00000000bb37c5e4 VBoxDDR0.r0 [ 955.776989] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1003.068930] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1029.793144] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1157.760060] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1181.969432] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1206.804891] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1230.781729] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1254.879290] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1278.993658] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1331.819039] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1358.737505] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1389.198118] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1432.990225] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1457.939682] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1534.881739] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1558.805379] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1582.866461] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1613.982591] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1628.780598] vboxdrv: 000000006e7d3077 VMMR0.r0 [ 1629.155857] vboxdrv: 000000009529fbf9 VBoxDDR0.r0 [ 1629.570665] VBoxNetFlt: attached to 'wlan0' / 3D7EC3A3FB4013DB2A08C0564A68420C [ 1777.477053] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1804.967546] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1831.844837] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1905.187227] hrtimer: interrupt took 103850 ns [ 3481.278345] usb 2-4: new high-speed USB device number 3 using xhci_hcd [ 3481.429584] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 3481.429594] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3481.429599] usb 2-4: Product: Disk 2.0 [ 3481.429602] usb 2-4: Manufacturer: USB [ 3481.429605] usb 2-4: SerialNumber: ... [ 3481.436943] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3481.446468] scsi host1: usb-storage 2-4:1.0 [ 3482.315891] usb 2-4: USB disconnect, device number 3 [ 3482.642357] usb 2-4: new high-speed USB device number 4 using xhci_hcd [ 3482.793593] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 3482.793604] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3482.793608] usb 2-4: Product: Disk 2.0 [ 3482.793611] usb 2-4: Manufacturer: USB [ 3482.793614] usb 2-4: SerialNumber: ... [ 3482.796447] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3482.798186] scsi host1: usb-storage 2-4:1.0 [ 3483.815166] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 3483.815902] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3483.816153] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 3483.816280] sd 1:0:0:0: [sdb] Write Protect is off [ 3483.816284] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3483.816427] sd 1:0:0:0: [sdb] No Caching mode page found [ 3483.816431] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 3483.827951] Alternate GPT is invalid, using primary GPT. [ 3483.827971] sdb: sdb1 sdb2 sdb3 [ 3483.828438] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 3500.376475] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 3556.493069] usb 2-4: USB disconnect, device number 4 [ 3556.806474] usb 2-4: new high-speed USB device number 5 using xhci_hcd [ 3556.957743] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 3556.957758] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3556.957764] usb 2-4: Product: Disk 2.0 [ 3556.957768] usb 2-4: Manufacturer: USB [ 3556.957771] usb 2-4: SerialNumber: ... [ 3556.960763] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3556.961355] scsi host2: usb-storage 2-4:1.0 [ 3557.056847] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 3557.995365] scsi 2:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 3557.995869] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3557.996226] sd 2:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 3557.996379] sd 2:0:0:0: [sdb] Write Protect is off [ 3557.996385] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3557.996532] sd 2:0:0:0: [sdb] No Caching mode page found [ 3557.996538] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3558.008059] Alternate GPT is invalid, using primary GPT. [ 3558.008087] sdb: sdb1 sdb2 sdb3 [ 3558.008682] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 3576.196186] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 3645.425234] usb 2-4: USB disconnect, device number 5 [ 3645.910826] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 3646.214661] usb 2-4: new high-speed USB device number 6 using xhci_hcd [ 3646.365934] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 3646.365951] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3646.365957] usb 2-4: Product: Disk 2.0 [ 3646.365961] usb 2-4: Manufacturer: USB [ 3646.365964] usb 2-4: SerialNumber: ... [ 3646.369679] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3646.371466] scsi host1: usb-storage 2-4:1.0 [ 3647.399510] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 3647.400130] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3647.400416] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 3647.400585] sd 1:0:0:0: [sdb] Write Protect is off [ 3647.400591] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3647.400750] sd 1:0:0:0: [sdb] No Caching mode page found [ 3647.400756] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 3647.411849] Alternate GPT is invalid, using primary GPT. [ 3647.411868] sdb: sdb1 sdb2 sdb3 [ 3647.412300] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 3648.402107] usb 2-4: USB disconnect, device number 6 [ 3649.014645] usb 2-4: new high-speed USB device number 7 using xhci_hcd [ 3649.165913] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 3649.165930] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3649.165936] usb 2-4: Product: Disk 2.0 [ 3649.165940] usb 2-4: Manufacturer: USB [ 3649.165944] usb 2-4: SerialNumber: ... [ 3649.171429] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3649.171808] scsi host1: usb-storage 2-4:1.0 [ 3650.183513] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 3650.184002] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3650.184602] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 3650.184771] sd 1:0:0:0: [sdb] Write Protect is off [ 3650.184782] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3650.184930] sd 1:0:0:0: [sdb] No Caching mode page found [ 3650.184936] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 3650.197506] Alternate GPT is invalid, using primary GPT. [ 3650.197522] sdb: sdb1 sdb2 sdb3 [ 3650.198027] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 3680.071174] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 4718.242388] usb 2-4: USB disconnect, device number 7 [ 4718.540300] usb 2-4: new high-speed USB device number 8 using xhci_hcd [ 4719.288654] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 4720.676351] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 4720.676587] usb usb2-port4: attempt power cycle [ 4721.296306] usb 2-4: new high-speed USB device number 10 using xhci_hcd [ 4721.320088] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 4721.320111] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4721.320117] usb 2-4: Product: Disk 2.0 [ 4721.320129] usb 2-4: Manufacturer: USB [ 4721.320133] usb 2-4: SerialNumber: ... [ 4721.323078] usb-storage 2-4:1.0: USB Mass Storage device detected [ 4721.324516] scsi host1: usb-storage 2-4:1.0 [ 4721.468008] usb 2-4: USB disconnect, device number 10 [ 4721.964311] usb 2-4: new high-speed USB device number 11 using xhci_hcd [ 4722.115569] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 4722.115583] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4722.115590] usb 2-4: Product: Disk 2.0 [ 4722.115595] usb 2-4: Manufacturer: USB [ 4722.115600] usb 2-4: SerialNumber: ... [ 4722.118580] usb-storage 2-4:1.0: USB Mass Storage device detected [ 4722.118906] scsi host1: usb-storage 2-4:1.0 [ 4722.409862] usb 2-4: USB disconnect, device number 11 [ 4723.148323] usb 2-4: new high-speed USB device number 12 using xhci_hcd [ 4723.299546] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 4723.299560] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4723.299570] usb 2-4: Product: Disk 2.0 [ 4723.299575] usb 2-4: Manufacturer: USB [ 4723.299579] usb 2-4: SerialNumber: ... [ 4723.302675] usb-storage 2-4:1.0: USB Mass Storage device detected [ 4723.303023] scsi host1: usb-storage 2-4:1.0 [ 4724.329181] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 4724.329695] scsi 1:0:0:0: Attached scsi generic sg1 type 0 [ 4724.330210] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 4724.330360] sd 1:0:0:0: [sdb] Write Protect is off [ 4724.330367] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4724.330518] sd 1:0:0:0: [sdb] No Caching mode page found [ 4724.330524] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 4724.343693] Alternate GPT is invalid, using primary GPT. [ 4724.343713] sdb: sdb1 sdb2 sdb3 [ 4724.344155] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 4748.636419] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 4900.290396] JFS: nTxBlock = 8192, nTxLock = 65536 [ 4907.308274] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 4994.612187] mmcblk1: p1 p2 [ 5009.257402] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5009.406970] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5009.406985] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 88 00 00 68 00 [ 5009.406990] I/O error, dev sdb, sector 2097354632 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 2 [ 5043.763997] mmcblk1: [ 5045.373467] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5045.523345] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5045.523359] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 88 00 00 68 00 [ 5045.523362] I/O error, dev sdb, sector 2097354632 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 [ 5046.146377] mmcblk1: [ 5046.251210] mmcblk1: [ 5056.237430] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5056.387105] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5056.387124] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 88 00 00 68 00 [ 5056.387128] I/O error, dev sdb, sector 2097354632 op 0x0:(READ) flags 0x80700 phys_seg 11 prio class 2 [ 5056.773535] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5056.923120] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5056.923132] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 88 00 00 68 00 [ 5056.923135] I/O error, dev sdb, sector 2097354632 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 [ 5057.409413] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5057.559237] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5057.559254] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 88 00 00 68 00 [ 5057.559257] I/O error, dev sdb, sector 2097354632 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 2 [ 5266.629727] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 5266.779662] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 5266.779682] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 17 00 00 00 f0 00 [ 5266.779687] I/O error, dev sdb, sector 2097354496 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 2 [ 6681.607732] mmcblk1: [ 6686.934026] mmcblk1: [ 6857.503364] VirtualBoxVM[5095]: segfault at a ip 00007fe1e4b41f60 sp 00007ffcffcc92a8 error 4 in libQt5Gui.so.5.15.8[7fe1e4ae2000+4d0000] likely on CPU 0 (core 0, socket 0) [ 6857.503407] Code: a8 00 00 00 e9 41 ff ff ff 90 48 8b 47 08 8b 80 a8 00 00 00 c3 90 0f 1f 40 00 48 8b 57 08 48 8b 82 f8 00 00 00 48 85 c0 74 10 <8b> 40 04 85 c0 74 09 48 8b 82 00 01 00 00 c3 90 31 c0 c3 90 66 66 [ 6858.207336] vboxnetflt: 0 out of 43434 packets were not sent (directed to host) [ 6858.496305] usb 2-4: reset high-speed USB device number 12 using xhci_hcd [ 6858.645832] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 6858.645849] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 7d 03 15 00 00 00 f0 00 [ 6858.645854] I/O error, dev sdb, sector 2097353984 op 0x0:(READ) flags 0x84700 phys_seg 29 prio class 2 [ 7056.032632] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7074.577455] mmcblk1: [ 7074.680228] mmcblk1: [ 7506.285150] usb 2-4: USB disconnect, device number 12 [ 7506.596228] usb 2-4: new high-speed USB device number 13 using xhci_hcd [ 7506.747889] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 7506.747906] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7506.747912] usb 2-4: Product: Disk 2.0 [ 7506.747917] usb 2-4: Manufacturer: USB [ 7506.747920] usb 2-4: SerialNumber: ... [ 7506.751398] usb-storage 2-4:1.0: USB Mass Storage device detected [ 7506.751754] scsi host2: usb-storage 2-4:1.0 [ 7507.757108] scsi 2:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 7507.757695] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7507.757987] sd 2:0:0:0: [sdc] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 7507.758142] sd 2:0:0:0: [sdc] Write Protect is off [ 7507.758149] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 7507.758301] sd 2:0:0:0: [sdc] No Caching mode page found [ 7507.758308] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 7507.771876] sdc: sdc1 sdc2 [ 7507.772297] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 7508.520208] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 8412.789945] mmcblk1: [ 8413.080580] mmcblk1: p1 [ 8413.351888] mmcblk1: p1 [ 8413.506164] mmcblk1: p1 [ 8413.691455] mmcblk1: p1 [ 8509.036625] mmcblk1: p1 [ 8509.170473] mmcblk1: p1 [ 8512.764382] mmcblk1: p1 [ 8513.852299] mmcblk1: p1 [ 8562.782843] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8621.848172] usb 2-4: USB disconnect, device number 13 [ 8622.977606] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8623.877804] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8623.878075] usb usb2-port4: attempt power cycle [ 8624.853810] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8625.821801] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8625.822266] usb usb2-port4: unable to enumerate USB device [ 8749.849242] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8755.953977] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8756.853822] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8756.854131] usb usb2-port4: attempt power cycle [ 8757.897995] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8758.797994] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8758.798271] usb usb2-port4: unable to enumerate USB device [ 8852.878069] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8858.866127] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8859.766128] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8859.766596] usb usb2-port4: attempt power cycle [ 8860.742130] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8861.642133] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [ 8861.642614] usb usb2-port4: unable to enumerate USB device [ 8869.073479] panel-4-docklik[2026]: segfault at 11 ip 00007fc693751fff sp 00007ffdf76ea150 error 4 in libdocklike.so[7fc69373e000+17000] likely on CPU 1 (core 1, socket 0) [ 8869.073527] Code: 0a 48 83 c4 38 48 89 d8 5b 5d c3 e8 2b cf fe ff 48 89 c3 e9 b8 e9 fe ff 0f 1f 00 55 48 89 fd 53 89 f3 48 83 ec 08 85 f6 74 31 <48> 8b 7d 10 e8 08 cb fe ff 48 85 c0 74 0a 89 de 48 89 c7 e8 d9 d0 [ 9266.475484] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9272.302606] usb 2-4: new high-speed USB device number 26 using xhci_hcd [ 9272.454926] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9272.454942] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9272.454948] usb 2-4: Product: Disk 2.0 [ 9272.454953] usb 2-4: Manufacturer: USB [ 9272.454956] usb 2-4: SerialNumber: ... [ 9272.457662] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9272.458009] scsi host1: usb-storage 2-4:1.0 [ 9273.487242] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9273.488043] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9273.488364] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9273.488491] sd 1:0:0:0: [sdb] Write Protect is off [ 9273.488495] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9273.488617] sd 1:0:0:0: [sdb] No Caching mode page found [ 9273.488622] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9273.502849] sdb: sdb1 sdb2 [ 9273.504005] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9286.353932] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 9342.350729] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9472.388610] usb 2-4: USB disconnect, device number 26 [ 9472.524114] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 9472.694718] usb 2-4: new high-speed USB device number 27 using xhci_hcd [ 9472.846556] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9472.846572] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9472.846579] usb 2-4: Product: Disk 2.0 [ 9472.846584] usb 2-4: Manufacturer: USB [ 9472.846588] usb 2-4: SerialNumber: ... [ 9472.849474] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9472.852410] scsi host1: usb-storage 2-4:1.0 [ 9473.361876] usb 2-4: USB disconnect, device number 27 [ 9473.862690] usb 2-4: new high-speed USB device number 28 using xhci_hcd [ 9474.474983] usb 2-4: device descriptor read/64, error -71 [ 9474.734153] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9474.734170] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9474.734176] usb 2-4: Product: Disk 2.0 [ 9474.734180] usb 2-4: Manufacturer: USB [ 9474.734184] usb 2-4: SerialNumber: ... [ 9474.739901] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9474.740186] scsi host1: usb-storage 2-4:1.0 [ 9475.759623] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9475.760127] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9475.760335] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9475.760461] sd 1:0:0:0: [sdb] Write Protect is off [ 9475.760466] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9475.760588] sd 1:0:0:0: [sdb] No Caching mode page found [ 9475.760591] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9475.774190] sdb: sdb1 sdb2 [ 9475.774629] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9488.071204] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 9613.789396] usb 2-4: USB disconnect, device number 28 [ 9613.874982] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 9614.095057] usb 2-4: new high-speed USB device number 29 using xhci_hcd [ 9614.246216] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9614.246231] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9614.246236] usb 2-4: Product: Disk 2.0 [ 9614.246240] usb 2-4: Manufacturer: USB [ 9614.246243] usb 2-4: SerialNumber: ... [ 9614.249060] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9614.250522] scsi host1: usb-storage 2-4:1.0 [ 9615.283650] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9615.284190] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9615.284384] sd 1:0:0:0: [sdb] Write Protect is off [ 9615.284389] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9615.284766] sd 1:0:0:0: [sdb] No Caching mode page found [ 9615.284772] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9615.286937] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9615.302096] sdb: sdb1 sdb2 [ 9615.302473] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9628.082655] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 9689.753542] usb 2-4: USB disconnect, device number 29 [ 9689.880317] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 9690.067148] usb 2-4: new high-speed USB device number 30 using xhci_hcd [ 9690.220971] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9690.220989] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9690.220995] usb 2-4: Product: Disk 2.0 [ 9690.221000] usb 2-4: Manufacturer: USB [ 9690.221003] usb 2-4: SerialNumber: ... [ 9690.223898] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9690.225827] scsi host1: usb-storage 2-4:1.0 [ 9691.247714] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9691.248559] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9691.248825] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9691.248952] sd 1:0:0:0: [sdb] Write Protect is off [ 9691.248956] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9691.249085] sd 1:0:0:0: [sdb] No Caching mode page found [ 9691.249089] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9691.261869] sdb: sdb1 sdb2 [ 9691.262326] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9704.084795] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 9963.723344] usb 2-4: USB disconnect, device number 30 [ 9963.803445] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 9964.035321] usb 2-4: new high-speed USB device number 31 using xhci_hcd [ 9964.186757] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9964.186773] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9964.186779] usb 2-4: Product: Disk 2.0 [ 9964.186784] usb 2-4: Manufacturer: USB [ 9964.186788] usb 2-4: SerialNumber: ... [ 9964.189700] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9964.192229] scsi host1: usb-storage 2-4:1.0 [ 9965.200086] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9965.200529] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9965.201098] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9965.201231] sd 1:0:0:0: [sdb] Write Protect is off [ 9965.201236] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9965.201356] sd 1:0:0:0: [sdb] No Caching mode page found [ 9965.201360] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9965.212895] sdb: sdb1 sdb2 [ 9965.213270] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9977.081832] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [ 9986.696450] usb 2-4: USB disconnect, device number 31 [ 9986.787078] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [ 9986.999395] usb 2-4: new high-speed USB device number 32 using xhci_hcd [ 9987.155227] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [ 9987.155242] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9987.155248] usb 2-4: Product: Disk 2.0 [ 9987.155252] usb 2-4: Manufacturer: USB [ 9987.155255] usb 2-4: SerialNumber: ... [ 9987.159923] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9987.162122] scsi host1: usb-storage 2-4:1.0 [ 9988.176080] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 9988.176831] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9988.177091] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [ 9988.177214] sd 1:0:0:0: [sdb] Write Protect is off [ 9988.177218] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9988.177339] sd 1:0:0:0: [sdb] No Caching mode page found [ 9988.177342] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 9988.191871] sdb: sdb1 sdb2 [ 9988.192394] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9994.081113] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [10249.882098] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10391.985419] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10496.944194] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10727.370650] usb 2-4: USB disconnect, device number 32 [10727.479117] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [10727.664512] usb 2-4: new high-speed USB device number 33 using xhci_hcd [10727.816380] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [10727.816397] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10727.816403] usb 2-4: Product: Disk 2.0 [10727.816408] usb 2-4: Manufacturer: USB [10727.816412] usb 2-4: SerialNumber: ... [10727.819199] usb-storage 2-4:1.0: USB Mass Storage device detected [10727.819557] scsi host1: usb-storage 2-4:1.0 [10728.849050] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [10728.852630] sd 1:0:0:0: Attached scsi generic sg1 type 0 [10728.852964] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [10728.853092] sd 1:0:0:0: [sdb] Write Protect is off [10728.853096] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [10728.853219] sd 1:0:0:0: [sdb] No Caching mode page found [10728.853222] sd 1:0:0:0: [sdb] Assuming drive cache: write through [10728.867432] sdb: sdb1 sdb2 [10728.867801] sd 1:0:0:0: [sdb] Attached SCSI removable disk [10740.075013] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [10847.919589] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10887.834618] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10974.900860] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10992.645291] usb 2-4: USB disconnect, device number 33 [10992.765211] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [10992.952856] usb 2-4: new high-speed USB device number 34 using xhci_hcd [10993.104757] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [10993.104773] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10993.104780] usb 2-4: Product: Disk 2.0 [10993.104784] usb 2-4: Manufacturer: USB [10993.104788] usb 2-4: SerialNumber: ... [10993.107658] usb-storage 2-4:1.0: USB Mass Storage device detected [10993.108003] scsi host1: usb-storage 2-4:1.0 [10994.129450] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [10994.132246] sd 1:0:0:0: Attached scsi generic sg1 type 0 [10994.132479] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [10994.132602] sd 1:0:0:0: [sdb] Write Protect is off [10994.132607] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [10994.132744] sd 1:0:0:0: [sdb] No Caching mode page found [10994.132748] sd 1:0:0:0: [sdb] Assuming drive cache: write through [10994.145604] sdb: sdb1 sdb2 [10994.145972] sd 1:0:0:0: [sdb] Attached SCSI removable disk [11006.077251] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [11218.769184] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11296.951413] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11301.865683] usb 2-4: USB disconnect, device number 34 [11301.980507] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [11302.177277] usb 2-4: new high-speed USB device number 35 using xhci_hcd [11302.329357] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [11302.329373] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11302.329379] usb 2-4: Product: Disk 2.0 [11302.329384] usb 2-4: Manufacturer: USB [11302.329388] usb 2-4: SerialNumber: ... [11302.332378] usb-storage 2-4:1.0: USB Mass Storage device detected [11302.332731] scsi host1: usb-storage 2-4:1.0 [11303.345943] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [11303.346774] sd 1:0:0:0: Attached scsi generic sg1 type 0 [11303.346997] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [11303.347121] sd 1:0:0:0: [sdb] Write Protect is off [11303.347125] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [11303.347246] sd 1:0:0:0: [sdb] No Caching mode page found [11303.347250] sd 1:0:0:0: [sdb] Assuming drive cache: write through [11303.361774] sdb: sdb1 sdb2 [11303.362252] sd 1:0:0:0: [sdb] Attached SCSI removable disk [11309.083928] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [11341.999952] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11366.946885] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11392.036677] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11482.613098] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11506.961584] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11539.825285] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11581.763434] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11626.849308] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11676.081802] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11702.897823] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11736.717900] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11817.909944] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11873.969568] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11900.850058] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11925.025899] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12045.983613] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12111.788907] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12135.973501] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12168.731080] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12192.849438] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12219.762445] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12243.986453] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12268.756885] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12324.796643] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12348.814599] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12547.984338] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12770.900079] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12868.770884] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13035.251254] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13062.596010] usb 2-4: USB disconnect, device number 35 [13062.697612] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [13062.907443] usb 2-4: new high-speed USB device number 36 using xhci_hcd [13063.058470] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [13063.058488] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13063.058494] usb 2-4: Product: Disk 2.0 [13063.058500] usb 2-4: Manufacturer: USB [13063.058504] usb 2-4: SerialNumber: ... [13063.061236] usb-storage 2-4:1.0: USB Mass Storage device detected [13063.062184] scsi host1: usb-storage 2-4:1.0 [13064.084361] scsi 1:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [13064.085041] sd 1:0:0:0: Attached scsi generic sg1 type 0 [13064.087430] sd 1:0:0:0: [sdb] 2097356800 512-byte logical blocks: (1.07 TB/1000 GiB) [13064.087654] sd 1:0:0:0: [sdb] Write Protect is off [13064.087662] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [13064.087825] sd 1:0:0:0: [sdb] No Caching mode page found [13064.087833] sd 1:0:0:0: [sdb] Assuming drive cache: write through [13064.102657] sdb: sdb1 sdb2 [13064.103914] sd 1:0:0:0: [sdb] Attached SCSI removable disk [13075.088644] UDF-fs: INFO Mounting volume '...', timestamp 2024/01/16 10:19 (1000) [13743.734299] usb 2-4: USB disconnect, device number 36 [13743.819487] Buffer I/O error on dev sdb1, logical block 128, lost sync page write [13744.032289] usb 2-4: new high-speed USB device number 37 using xhci_hcd [13744.184036] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [13744.184105] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13744.184112] usb 2-4: Product: Disk 2.0 [13744.184118] usb 2-4: Manufacturer: USB [13744.184122] usb 2-4: SerialNumber: ... [13744.186957] usb-storage 2-4:1.0: USB Mass Storage device detected [13744.187933] scsi host1: usb-storage 2-4:1.0 [13744.617705] usb 2-4: USB disconnect, device number 37 [13744.904101] usb 2-4: new high-speed USB device number 38 using xhci_hcd [13745.055653] usb 2-4: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00 [13745.055663] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13745.055666] usb 2-4: Product: Disk 2.0 [13745.055669] usb 2-4: Manufacturer: USB [13745.055671] usb 2-4: SerialNumber: ... [13745.059049] usb-storage 2-4:1.0: USB Mass Storage device detected [13745.059358] scsi host1: usb-storage 2-4:1.0 [13745.485112] usb 2-4: USB disconnect, device number 38 [13745.776117] usb 2-4: new high-speed USB device number 39 using xhci_hcd [13745.904659] usb 2-4: Device not responding to setup address. [13746.112806] usb 2-4: Device not responding to setup address. [13746.320278] usb 2-4: device not accepting address 39, error -71 [13747.220371] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [13747.220825] usb usb2-port4: attempt power cycle [13747.840305] usb 2-4: new high-speed USB device number 41 using xhci_hcd [13747.841001] usb 2-4: Device not responding to setup address. [13748.048997] usb 2-4: Device not responding to setup address. [13748.256303] usb 2-4: device not accepting address 41, error -71 [13749.156367] usb usb2-port4: Cannot enable. Maybe the USB cable is bad? [13749.156815] usb usb2-port4: unable to enumerate USB device