Probe #2252f9b75c of ASUSTek M4A88T-I DELUXE Desktop Computer

Log: hwinfo

05: PCI 300.0: 0c03 USB Controller (XHCI) [Created at pci.386] Unique ID: svHJ.mefk2bzhA52 Parent ID: CvwD.W+pZ3H_NSVC SysFS ID: /devices/pci0000:00/0000:00:05.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: usb controller Model: "NEC uPD720200 USB 3.0 Host Controller" Vendor: pci 0x1033 "NEC Corporation" Device: pci 0x0194 "uPD720200 USB 3.0 Host Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8413 "P8P67 Deluxe Motherboard" Revision: 0x03 Driver: "xhci_hcd" Memory Range: 0xfebfe000-0xfebfffff (rw,non-prefetchable) IRQ: 17 (39156 events) Module Alias: "pci:v00001033d00000194sv00001043sd00008413bc0Csc03i30" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (PCI bridge) 06: PCI 18.3: 0600 Host bridge [Created at pci.386] Unique ID: Fhhh.+V6VV7woehA SysFS ID: /devices/pci0000:00/0000:00:18.3 SysFS BusID: 0000:00:18.3 Hardware Class: bridge Model: "AMD Family 10h Processor Miscellaneous Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1203 "Family 10h Processor Miscellaneous Control" Driver: "k10temp" Driver Modules: "k10temp" Module Alias: "pci:v00001022d00001203sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: k10temp is active Driver Activation Cmd: "modprobe k10temp" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 13.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 06bT.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ehci-pci" Memory Range: 0xfe7ff400-0xfe7ff4ff (rw,non-prefetchable) IRQ: 19 (2719281 events) Module Alias: "pci:v00001002d00004396sv00001043sd00008389bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 18.1: 0600 Host bridge [Created at pci.386] Unique ID: W1j0.zgD+X_gObw9 SysFS ID: /devices/pci0000:00/0000:00:18.1 SysFS BusID: 0000:00:18.1 Hardware Class: bridge Model: "AMD Family 10h Processor Address Map" Vendor: pci 0x1022 "AMD" Device: pci 0x1201 "Family 10h Processor Address Map" Module Alias: "pci:v00001022d00001201sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.7jPWmoeCYd4 Parent ID: 8otl.+atpaisgw6C SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x83a3 "M4A785/P7P55 Motherboard" Revision: 0x03 Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfdfff000-0xfdffffff (ro,non-prefetchable) Memory Range: 0xfdff8000-0xfdffbfff (ro,non-prefetchable) Memory Range: 0xfeaf0000-0xfeafffff (ro,non-prefetchable,disabled) IRQ: 16 (38496 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Module Alias: "pci:v000010ECd00008168sv00001043sd000083A3bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (PCI bridge) 10: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.U9lIy+bHGE4 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "ASUSTeK AMD RS780/RS880 PCI to PCI bridge (int gfx)" Vendor: pci 0x1043 "ASUSTeK Computer Inc." Device: pci 0x9602 "AMD RS780/RS880 PCI to PCI bridge (int gfx)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e Module Alias: "pci:v00001043d00009602sv00001043sd0000843Ebc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 14.5: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5 SysFS BusID: 0000:00:14.5 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4399 "SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4396 Driver: "ohci-pci" Memory Range: 0xfe7fa000-0xfe7fafff (rw,non-prefetchable) IRQ: 18 (427450 events) Module Alias: "pci:v00001002d00004399sv00001002sd00004396bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: HSco.iq6zROgYJY6 SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4398 Driver: "ohci-pci" Memory Range: 0xfe7fc000-0xfe7fcfff (rw,non-prefetchable) IRQ: 18 (427450 events) Module Alias: "pci:v00001002d00004397sv00001002sd00004398bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 105.1: 0403 Audio device [Created at pci.386] Unique ID: l4dC.GrINAORzjq9 Parent ID: vSkL.U9lIy+bHGE4 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.1 SysFS BusID: 0000:01:05.1 Hardware Class: sound Model: "ASUSTeK M5A88-V EVO" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x970f "RS880 HDMI Audio [Radeon HD 4200 Series]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e "M5A88-V EVO" Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9e8000-0xfe9ebfff (rw,non-prefetchable) IRQ: 19 (2719281 events) Module Alias: "pci:v00001002d0000970Fsv00001043sd0000843Ebc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) 14: PCI 04.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: 8otl.+atpaisgw6C SysFS ID: /devices/pci0000:00/0000:00:04.0 SysFS BusID: 0000:00:04.0 Hardware Class: bridge Model: "AMD RS780/RS880 PCI to PCI bridge (PCIE port 0)" Vendor: pci 0x1022 "AMD" Device: pci 0x9604 "RS780/RS880 PCI to PCI bridge (PCIE port 0)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e Driver: "pcieport" IRQ: 16 (38496 events) Module Alias: "pci:v00001022d00009604sv00001043sd0000843Ebc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 14.3: 0601 ISA bridge [Created at pci.386] Unique ID: yX7n.izfWtCFZk16 SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB7x0/SB8x0/SB9x0 LPC host controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439d "SB7x0/SB8x0/SB9x0 LPC host controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Module Alias: "pci:v00001002d0000439Dsv00001043sd00008389bc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 14.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: Eu86.G2ybYGkeYC3 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 IDE Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439c "SB7x0/SB8x0/SB9x0 IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (38496 events) Module Alias: "pci:v00001002d0000439Csv00001043sd00008389bc01sc01i8A" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 12.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: x_X+.woNt+Y5bX7A SysFS ID: /devices/pci0000:00/0000:00:12.2 SysFS BusID: 0000:00:12.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4397 Driver: "ehci-pci" Memory Range: 0xfe7ff800-0xfe7ff8ff (rw,non-prefetchable) IRQ: 17 (39156 events) Module Alias: "pci:v00001002d00004396sv00001002sd00004397bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.OVHk5uULXUE SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "ASUSTeK M5A88-V EVO" Vendor: pci 0x1022 "AMD" Device: pci 0x9601 "RS880 Host Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e "M5A88-V EVO" Module Alias: "pci:v00001022d00009601sv00001043sd0000843Ebc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 18.4: 0600 Host bridge [Created at pci.386] Unique ID: 60BX.Ww2F_h1WA4B SysFS ID: /devices/pci0000:00/0000:00:18.4 SysFS BusID: 0000:00:18.4 Hardware Class: bridge Model: "AMD Family 10h Processor Link Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1204 "Family 10h Processor Link Control" Module Alias: "pci:v00001022d00001204sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 12.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: CLZK._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfe7fe000-0xfe7fefff (rw,non-prefetchable) IRQ: 16 (38496 events) Module Alias: "pci:v00001002d00004397sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 18.2: 0600 Host bridge [Created at pci.386] Unique ID: OMCs.U5Al0Zo57JA SysFS ID: /devices/pci0000:00/0000:00:18.2 SysFS BusID: 0000:00:18.2 Hardware Class: bridge Model: "AMD Family 10h Processor DRAM Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1202 "Family 10h Processor DRAM Controller" Module Alias: "pci:v00001022d00001202sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 9n5e.kse81omRjXA SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4399 Driver: "ohci-pci" Memory Range: 0xfe7fb000-0xfe7fbfff (rw,non-prefetchable) IRQ: 18 (427450 events) Module Alias: "pci:v00001002d00004398sv00001002sd00004399bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 18.0: 0600 Host bridge [Created at pci.386] Unique ID: fiDB.SGHF3QZh3Y9 SysFS ID: /devices/pci0000:00/0000:00:18.0 SysFS BusID: 0000:00:18.0 Hardware Class: bridge Model: "AMD Family 10h Processor HyperTransport Configuration" Vendor: pci 0x1022 "AMD" Device: pci 0x1200 "Family 10h Processor HyperTransport Configuration" Module Alias: "pci:v00001022d00001200sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: ul7N.oC5qFiknKaA Parent ID: vSkL.U9lIy+bHGE4 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "ASUSTeK M5A88-V EVO" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x9715 "RS880 [Radeon HD 4250]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e "M5A88-V EVO" Driver: "radeon" Driver Modules: "radeon" Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0xd000-0xd0ff (rw) Memory Range: 0xfe9f0000-0xfe9fffff (rw,non-prefetchable) Memory Range: 0xfe800000-0xfe8fffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 18 (427450 events) Module Alias: "pci:v00001002d00009715sv00001043sd0000843Ebc03sc00i00" Driver Info #0: Driver Status: radeon is active Driver Activation Cmd: "modprobe radeon" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) 26: PCI 14.2: 0403 Audio device [Created at pci.386] Unique ID: 5Dex.ir7etcCdMX4 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x845a Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe7f4000-0xfe7f7fff (rw,non-prefetchable) IRQ: 16 (38496 events) Module Alias: "pci:v00001002d00004383sv00001043sd0000845Abc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 11.0: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: 7EWs.WPBK7Mqox0D SysFS ID: /devices/pci0000:00/0000:00:11.0 SysFS BusID: 0000:00:11.0 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4390 "SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 "M4A785TD Motherboard" Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xc000-0xc007 (rw) I/O Ports: 0xb000-0xb003 (rw) I/O Ports: 0xa000-0xa007 (rw) I/O Ports: 0x9000-0x9003 (rw) I/O Ports: 0x8000-0x800f (rw) Memory Range: 0xfe7ffc00-0xfe7fffff (rw,non-prefetchable) IRQ: 22 (77024 events) Module Alias: "pci:v00001002d00004390sv00001043sd00008389bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 14.0: 0c05 SMBus [Created at pci.386] Unique ID: MZfG.Q0RvM63dRR3 SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 "M4A785TD Motherboard" Revision: 0x3c Module Alias: "pci:v00001002d00004385sv00001043sd00008389bc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Driver Info #1: Driver Status: sp5100_tco is not active Driver Activation Cmd: "modprobe sp5100_tco" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 05.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: CvwD.W+pZ3H_NSVC SysFS ID: /devices/pci0000:00/0000:00:05.0 SysFS BusID: 0000:00:05.0 Hardware Class: bridge Model: "AMD RS780/RS880 PCI to PCI bridge (PCIE port 1)" Vendor: pci 0x1022 "AMD" Device: pci 0x9605 "RS780/RS880 PCI to PCI bridge (PCIE port 1)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x843e Driver: "pcieport" IRQ: 17 (39156 events) Module Alias: "pci:v00001022d00009605sv00001043sd0000843Ebc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 12.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 4g2A.DF3jwynFrw6 SysFS ID: /devices/pci0000:00/0000:00:12.1 SysFS BusID: 0000:00:12.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4398 Driver: "ohci-pci" Memory Range: 0xfe7fd000-0xfe7fdfff (rw,non-prefetchable) IRQ: 16 (38496 events) Module Alias: "pci:v00001002d00004398sv00001002sd00004398bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.cHdyg_eUNo1 Parent ID: ul7N.oC5qFiknKaA Hardware Class: monitor Model: "Acer T232HL" Vendor: ACR Device: eisa 0x013a "Acer T232HL" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1152x864@75Hz Resolution: 1280x1024@60Hz Resolution: 1920x1080@60Hz Size: 510x287 mm Year of Manufacture: 2012 Week of Manufacture: 38 Detailed Timings #0: Resolution: 1920x1080 Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz Driver Info #0: Max. Resolution: 1920x1080 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 30-83 kHz Bandwidth: 148 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (VGA compatible controller) 32: SCSI 600.0: 10600 Disk [Created at block.245] Unique ID: 2UT6.iKPykgGzpVD Parent ID: x_X+.woNt+Y5bX7A SysFS ID: /class/block/sdb SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "Generic USB3.0 CRW -SD" Vendor: usb 0x0bda "Generic-" Device: usb 0x0326 "USB3.0 CRW -SD" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdb (/dev/sg1) Device Files: /dev/sdb, /dev/disk/by-id/usb-Generic-_USB3.0_CRW_-SD_...-0:0, /dev/disk/by-path/pci-0000:00:12.2-usb-0:3:1.0-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:1) Speed: 480 Mbps Module Alias: "usb:v0BDAp0326d1124dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 33: SCSI 600.1: 10600 Disk [Created at block.256] Unique ID: LUEV.pUZPvC0GdmE Parent ID: x_X+.woNt+Y5bX7A SysFS ID: /class/block/sdc SysFS BusID: 6:0:0:1 SysFS Device Link: /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:1 Hardware Class: disk Model: "Generic USB3.0 CRW -SD" Vendor: usb 0x0bda "Generic-" Device: usb 0x0326 "USB3.0 CRW -SD" Revision: "1.00" Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdc (/dev/sg2) Device Files: /dev/sdc, /dev/disk/by-id/usb-Generic-_USB3.0_CRW_-SD_...-0:1, /dev/disk/by-path/pci-0000:00:12.2-usb-0:3:1.0-scsi-0:0:0:1 Device Number: block 8:32-8:47 (char 21:2) Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 34: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.BVF64zRbVj6 Parent ID: 7EWs.WPBK7Mqox0D SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "Samsung SSD 840" Vendor: "Samsung" Device: "SSD 840" Revision: "AB0Q" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-Samsung_SSD_840_EVO_500GB_..., /dev/disk/by-id/wwn-0x... /dev/disk/by-path/pci-0000:00:11.0-ata-1 Device Number: block 8:0-8:15 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (SATA controller) 35: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: rg_L.kTEc_HiymW2 Parent ID: zPk0.uYbnlyRCGC6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0 SysFS BusID: 4-2:1.0 Hardware Class: keyboard Model: "Microsoft Comfort Curve Keyboard 3000" Hotplug: USB Vendor: usb 0x045e "Microsoft Corp." Device: usb 0x07b6 "Comfort Curve Keyboard 3000" Revision: "1.01" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-id/usb-Microsoft_Comfort_Curve_Keyboard_...-event-kbd, /dev/input/by-path/pci-0000:00:12.1-usb-0:2:1.0-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v045Ep07B6d0101dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Hub) 36: USB 00.1: 11500 Bluetooth Device [Created at usb.122] Unique ID: S4LM.OM1JnCQ6sSB Parent ID: 7eqy.PaupGMfzSp8 SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1 SysFS BusID: 6-2:1.1 Hardware Class: bluetooth Model: "Qualcomm Atheros AR3011 Bluetooth" Hotplug: USB Vendor: usb 0x0cf3 "Qualcomm Atheros Communications" Device: usb 0x3005 "AR3011 Bluetooth" Revision: "0.01" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v0CF3p3005d0001dcE0dsc01dp01icE0isc01ip01in01" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #37 (Hub) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.PaupGMfzSp8 Parent ID: 9n5e.kse81omRjXA SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 38: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: HyGm.PHzq81oaZA0 Parent ID: cLrx.lRoCB54l1cE SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.1 SysFS BusID: 1-2.1:1.1 Hardware Class: unknown Model: "Advanced Silicon S.A CoolTouch(TM) System" Hotplug: USB Vendor: usb 0x2149 "Advanced Silicon S.A." Device: usb 0x2306 "CoolTouch(TM) System" Revision: "13.31" Driver: "usbhid" Driver Modules: "usbhid" Speed: 12 Mbps Module Alias: "usb:v2149p2306d1331dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: cLrx.lRoCB54l1cE Parent ID: k4bc.YdoZZg0c8i6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0 SysFS BusID: 1-2:1.0 Hardware Class: hub Model: "Genesys Logic 4-port hub" Hotplug: USB Vendor: usb 0x05e3 "Genesys Logic, Inc." Device: usb 0x0610 "4-port hub" Revision: "70.17" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v05E3p0610d7017dc09dsc00dp02ic09isc00ip02in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #49 (Hub) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.7qWCOCfUJwE Parent ID: CLZK._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 41: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: HpcW.f7mx8T6d61E Parent ID: zPk0.uYbnlyRCGC6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0 SysFS BusID: 4-3:1.0 Hardware Class: keyboard Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc534 "Unifying Receiver" Revision: "29.01" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event4 Device Files: /dev/input/event4, /dev/input/by-id/usb-Logitech_USB_...-event-kbd, /dev/input/by-path/pci-0000:00:12.1-usb-0:3:1.0-event-kbd Device Number: char 13:68 Speed: 12 Mbps Module Alias: "usb:v046DpC534d2901dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Hub) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT._WUAGn1cSY8 Parent ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: Cxbk.nGhi8EJ95NF Parent ID: KgLP.vNHThQQZKpC SysFS ID: /devices/pci0000:00/0000:00:05.0/0000:03:00.0/usb9/9-2/9-2:1.0 SysFS BusID: 9-2:1.0 Hardware Class: hub Model: "Genesys Logic Hub" Hotplug: USB Vendor: usb 0x05e3 "Genesys Logic, Inc." Device: usb 0x0612 "Hub" Revision: "70.17" Driver: "hub" Driver Modules: "usbcore" Module Alias: "usb:v05E3p0612d7017dc09dsc00dp03ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #54 (Hub) 45: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: IsEQ.TaJmLqVYhZC Parent ID: zPk0.uYbnlyRCGC6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1 SysFS BusID: 4-2:1.1 Hardware Class: unknown Model: "Microsoft Comfort Curve Keyboard 3000" Hotplug: USB Vendor: usb 0x045e "Microsoft Corp." Device: usb 0x07b6 "Comfort Curve Keyboard 3000" Revision: "1.01" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-id/usb-Microsoft_Comfort_Curve_Keyboard_...-if01-event-kbd, /dev/input/by-path/pci-0000:00:12.1-usb-0:2:1.1-event-kbd Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v045Ep07B6d0101dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Hub) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.uYbnlyRCGC6 Parent ID: 4g2A.DF3jwynFrw6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (USB Controller) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: FZIx.029GFTetOb3 Parent ID: svHJ.mefk2bzhA52 SysFS ID: /devices/pci0000:00/0000:00:05.0/0000:03:00.0/usb8/8-0:1.0 SysFS BusID: 8-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp01ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (USB Controller) 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.YdoZZg0c8i6 Parent ID: x_X+.woNt+Y5bX7A SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 51: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: 7bWa.Y4De_w_8VG3 Parent ID: pBe4.3f5c44ENLJ9 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0 SysFS BusID: 2-3:1.0 Hardware Class: network Model: "ASUSTek 802.11n Network Adapter" Hotplug: USB Vendor: usb 0x0b05 "ASUSTek Computer, Inc." Device: usb 0x1742 "802.11n Network Adapter" Revision: "1.01" Serial ID: -- Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx00224369fbc5 Features: WLAN Speed: 480 Mbps HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v0B05p1742d0101dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: rt2800usb is active Driver Activation Cmd: "modprobe rt2800usb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #55 (Hub) 52: USB 00.1: 10503 USB Mouse [Created at usb.122] Unique ID: k_sa.anqLpZFcgY2 Parent ID: zPk0.uYbnlyRCGC6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1 SysFS BusID: 4-3:1.1 Hardware Class: mouse Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc534 "Unifying Receiver" Revision: "29.01" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 12 Mbps Module Alias: "usb:v046DpC534d2901dc00dsc00dp00ic03isc01ip02in01" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Hub) 53: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.erpEvbsFWX1 Parent ID: HSco.iq6zROgYJY6 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (USB Controller) 54: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: KgLP.vNHThQQZKpC Parent ID: svHJ.mefk2bzhA52 SysFS ID: /devices/pci0000:00/0000:00:05.0/0000:03:00.0/usb9/9-0:1.0 SysFS BusID: 9-0:1.0 Hardware Class: hub Model: "Linux Foundation 3.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0003 "3.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Module Alias: "usb:v1D6Bp0003d0415dc09dsc00dp03ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (USB Controller) 55: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.3f5c44ENLJ9 Parent ID: 06bT.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #7 (USB Controller) 56: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.4.3 "AMD Phenom(tm) II X2 555 Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 3200 MHz BogoMips: 6428.28 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 57: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.4.3 "AMD Phenom(tm) II X2 555 Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 3200 MHz BogoMips: 6428.28 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 58: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 59: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 52F2.ndpeucax6V1 Parent ID: 7bWa.Y4De_w_8VG3 SysFS ID: /class/net/wlx00224369fbc5 SysFS Device Link: /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx00224369fbc5 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (WLAN controller) 60: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.7jPWmoeCYd4 SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (Ethernet controller)


Hardware for Linux and BSD

GitHub