Probe #4270aca528 of Dell 0KP561 Desktop Computer (OptiPlex 330)

Log: hwinfo

05: PCI 302.0: 0280 Network controller [Created at pci.386] Unique ID: 08OF.fIM068DaO1C Parent ID: 6NW+.IUGS73JJeM4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0 SysFS BusID: 0000:03:02.0 Hardware Class: network Model: "Broadcom BCM4321 802.11b/g/n" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4329 "BCM4321 802.11b/g/n" SubVendor: pci 0x1737 "Linksys" SubDevice: pci 0x0060 Revision: 0x01 Driver: "b43-pci-bridge" Driver Modules: "ssb" Memory Range: 0xdfafc000-0xdfafffff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v000014E4d00004329sv00001737sd00000060bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (PCI bridge) 06: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.IUGS73JJeM4 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0xe1 Module Alias: "pci:v00008086d0000244Esv00001028sd00000220bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.Vm3xJHQ0zpB SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 I/O Ports: 0xece0-0xecff (rw) IRQ: 5 (no events) Module Alias: "pci:v00008086d000027DAsv00001028sd00000220bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is not active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.LBQhdE6fT+7 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82G33/G31/P35/P31 Express DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c0 "82G33/G31/P35/P31 Express DRAM Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x0a Module Alias: "pci:v00008086d000029C0sv00001028sd00000220bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.+ZwAl+DdTe5 SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801G (ICH7 Family) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27df "82801G (ICH7 Family) IDE Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xffa0-0xffaf (rw) IRQ: 16 (19235 events) Module Alias: "pci:v00008086d000027DFsv00001028sd00000220bc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.Dj4X6gAP7t8 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff40-0xff5f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027CAsv00001028sd00000220bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.BuB19Xx_368 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff80-0xff9f (rw) IRQ: 21 (8478 events) Module Alias: "pci:v00008086d000027C8sv00001028sd00000220bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.KZeR2ZfJCB4 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel G33" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c2 "G33" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x0a Driver: "i915" Driver Modules: "i915" Memory Range: 0xdfe00000-0xdfe7ffff (rw,non-prefetchable) I/O Ports: 0xecd8-0xecdf (rw) Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable) Memory Range: 0xdff00000-0xdfffffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (19235 events) Module Alias: "pci:v00008086d000029C2sv00001028sd00000220bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.lYZCMtuZiTE SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "ehci-pci" Memory Range: 0xff980800-0xff980bff (rw,non-prefetchable) IRQ: 21 (8478 events) Module Alias: "pci:v00008086d000027CCsv00001028sd00000220bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.zTAQgqB5OZ8 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel NM10/ICH7 Family SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c1 "NM10/ICH7 Family SATA Controller [AHCI mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xfe00-0xfe07 (rw) I/O Ports: 0xfe10-0xfe13 (rw) I/O Ports: 0xfe20-0xfe27 (rw) I/O Ports: 0xfe30-0xfe33 (rw) I/O Ports: 0xfec0-0xfecf (rw) Memory Range: 0xd0200000-0xd02003ff (rw,non-prefetchable) IRQ: 24 (32157 events) Module Alias: "pci:v00008086d000027C1sv00001028sd00000220bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.kVsEgj0CL79 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "pcieport" IRQ: 16 (19235 events) Module Alias: "pci:v00008086d000027D0sv00001028sd00000220bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.k71HbEI6fF9 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff20-0xff3f (rw) IRQ: 23 (no events) Module Alias: "pci:v00008086d000027CBsv00001028sd00000220bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.7CqJJvZ7xd0 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b8 "82801GB/GR (ICH7 Family) LPC Interface Bridge" Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B8sv00000000sd00000000bc06sc01i00" Driver Info #0: Driver Status: intel_rng is not active Driver Activation Cmd: "modprobe intel_rng" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #2: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.wR7H9wEaps4 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel 82G33/G31/P35/P31 Express PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c1 "82G33/G31/P35/P31 Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x0a Driver: "pcieport" IRQ: 16 (19235 events) Module Alias: "pci:v00008086d000029C1sv00001028sd00000220bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.B_1sEUtu9F8 Parent ID: z8Q3.kVsEgj0CL79 SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Broadcom NetLink BCM5787 Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x169b "NetLink BCM5787 Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp2s0 Memory Range: 0xdfbf0000-0xdfbfffff (rw,non-prefetchable) IRQ: 26 (304153 events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v000014E4d0000169Bsv00001028sd00000220bc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 20: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.iI8nd53ibU8 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff60-0xff7f (rw) IRQ: 22 (no events) Module Alias: "pci:v00008086d000027C9sv00001028sd00000220bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.r++3yOyzTo9 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel 82G33/G31 Express Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c3 "82G33/G31 Express Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x0a Memory Range: 0xdfe80000-0xdfefffff (rw,non-prefetchable) Module Alias: "pci:v00008086d000029C3sv00001028sd00000220bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.JeshjO0WzFB SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0220 Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdfdfc000-0xdfdfffff (rw,non-prefetchable) IRQ: 25 (492 events) Module Alias: "pci:v00008086d000027D8sv00001028sd00000220bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.mpNR7g3Jn95 Parent ID: _Znp.KZeR2ZfJCB4 Hardware Class: monitor Model: "DELL E173FP" Vendor: DEL "DELL" Device: eisa 0xa00b "DELL E173FP" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@75Hz Resolution: 1280x1024@60Hz Size: 338x270 mm Year of Manufacture: 2005 Week of Manufacture: 5 Detailed Timings #0: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 31-80 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (VGA compatible controller) 24: SCSI 300.0: 10600 Disk [Created at block.245] Unique ID: KD9E.hRu+vyo5Md7 Parent ID: w7Y8.zTAQgqB5OZ8 SysFS ID: /class/block/sr0 SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "PLDS DVD+-RW DH-16A6S" Vendor: "PLDS" Device: "DVD+-RW DH-16A6S" Revision: "YD11" Driver: "ahci", "sr" Driver Modules: "ahci" Device File: /dev/sr0 (/dev/sg1) Device Number: block 11:0 (char 21:1) BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (SATA controller) 25: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.1wvLE+fqRl4 Parent ID: w7Y8.zTAQgqB5OZ8 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "WDC WD3200AAKS-7" Vendor: "WDC" Device: "WD3200AAKS-7" Revision: "3E02" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x81 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (SATA controller) 26: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: FKGF.A_fMT01I2mA Parent ID: pBe4.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: keyboard Model: "Dell Model L100 Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2105 "Model L100 Keyboard" Revision: "3.52" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2105d0352dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (Hub) 27: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.iI8nd53ibU8 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 28: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: hSuP.tpADaHXGgV2 Parent ID: pBe4.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: mouse Model: "Colorado USB Optical Mouse" Hotplug: USB Vendor: usb 0x0461 "Colorado" Device: usb 0x4e22 "USB Optical Mouse" Revision: "1.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v0461p4E22d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (Hub) 29: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.lYZCMtuZiTE SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (USB Controller) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.Dj4X6gAP7t8 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (USB Controller) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.BuB19Xx_368 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.k71HbEI6fF9 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 33: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 2380 MHz BogoMips: 4787.84 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 34: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 2380 MHz BogoMips: 4787.84 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 35: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 36: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.B_1sEUtu9F8 SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp2s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (Ethernet controller)


Hardware for Linux and BSD

GitHub