Probe #69a029f975 of Biostar H61MU3 Desktop Computer

Log: hwinfo

11: PCI 300.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: svHJ.2iCxaNjPHbB Parent ID: hoOk.+p9ilOi+bJ4 SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: bridge Model: "Integrated Technology Express IT8893E PCIe to PCI Bridge" Vendor: pci 0x1283 "Integrated Technology Express, Inc." Device: pci 0x8893 "IT8893E PCIe to PCI Bridge" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x10 IRQ: 18 (5 events) Module Alias: "pci:v00001283d00008893sv00001565sd00003108bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (PCI bridge) 12: PCI 1f.2: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.259q7CNh0lC SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c00 "6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3)" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x5207 Revision: 0x05 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xf0d0-0xf0df (rw) I/O Ports: 0xf0c0-0xf0cf (rw) IRQ: 19 (10 events) Module Alias: "pci:v00008086d00001C00sv00001565sd00005207bc01sc01i8A" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.uszcgf_6eG7 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c10 "6 Series/C200 Series Chipset Family PCI Express Root Port 1" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0xb5 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00008086d00001C10sv00001565sd00003108bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.nIueQG8C0h2 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel H61 Express Chipset LPC Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c5c "H61 Express Chipset LPC Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x05 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00001C5Csv00001565sd00003108bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 200.0: 0c03 USB Controller (XHCI) [Created at pci.386] Unique ID: B35A.nMBIQ_5OKN9 Parent ID: qTvu.whs6eoDXh18 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: usb controller Model: "ASMedia ASM1042 SuperSpeed USB Host Controller" Vendor: pci 0x1b21 "ASMedia Technology Inc." Device: pci 0x1042 "ASM1042 SuperSpeed USB Host Controller" SubVendor: pci 0x174c SubDevice: pci 0x2104 Driver: "xhci_hcd" Driver Modules: "xhci_pci" Memory Range: 0xfe500000-0xfe507fff (rw,non-prefetchable) IRQ: 17 (no events) Module Alias: "pci:v00001B21d00001042sv0000174Csd00002104bc0Csc03i30" Driver Info #0: Driver Status: xhci_pci is active Driver Activation Cmd: "modprobe xhci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (PCI bridge) 16: PCI 16.0: 0780 Communication controller [Created at pci.386] Unique ID: WnlC.EiyAjIv9UKD SysFS ID: /devices/pci0000:00/0000:00:16.0 SysFS BusID: 0000:00:16.0 Hardware Class: unknown Model: "Intel 6 Series/C200 Series Chipset Family MEI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c3a "6 Series/C200 Series Chipset Family MEI Controller #1" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x04 Driver: "mei_me" Memory Range: 0xfe607000-0xfe60700f (rw,non-prefetchable) IRQ: 27 (17 events) Module Alias: "pci:v00008086d00001C3Asv00001565sd00003108bc07sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 100.0: 0200 Ethernet controller [Created at pci.386] Unique ID: lkKU.WSJoqqBlG0C Parent ID: z8Q3.uszcgf_6eG7 SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x230a Revision: 0x06 Driver: "r8169" Driver Modules: "r8169" Device File: enp1s0 I/O Ports: 0xe000-0xefff (rw) Memory Range: 0xd0004000-0xd0004fff (ro,non-prefetchable) Memory Range: 0xd0000000-0xd0003fff (ro,non-prefetchable) IRQ: 16 (119 events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v000010ECd00008168sv00001565sd0000230Abc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (PCI bridge) 18: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.bMQYymJ9On5 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c20 "6 Series/C200 Series Chipset Family High Definition Audio Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x821f Revision: 0x05 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe600000-0xfe603fff (rw,non-prefetchable) IRQ: 32 (558 events) Module Alias: "pci:v00008086d00001C20sv00001565sd0000821Fbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1f.5: 0101 IDE interface (PCI native mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: W60f.5TuzgOFKWDC SysFS ID: /devices/pci0000:00/0000:00:1f.5 SysFS BusID: 0000:00:1f.5 Hardware Class: storage Model: "Intel 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c08 "6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5)" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x5207 Revision: 0x05 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xf0b0-0xf0b7 (rw) I/O Ports: 0xf0a0-0xf0a3 (rw) I/O Ports: 0xf090-0xf097 (rw) I/O Ports: 0xf080-0xf083 (rw) I/O Ports: 0xf070-0xf07f (rw) I/O Ports: 0xf060-0xf06f (rw) IRQ: 19 (10 events) Module Alias: "pci:v00008086d00001C08sv00001565sd00005207bc01sc01i85" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.11EXh4_Zwx4 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 6 Series/C200 Series Chipset Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c22 "6 Series/C200 Series Chipset Family SMBus Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x05 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xfe604000-0xfe6040ff (rw,non-prefetchable) I/O Ports: 0xf040-0xf05f (rw) IRQ: 18 (5 events) Module Alias: "pci:v00008086d00001C22sv00001565sd00003108bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.bsaNQ23oXZ9 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 2nd Generation Core Processor Family DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0100 "2nd Generation Core Processor Family DRAM Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x09 Driver: "snb_uncore" Driver Modules: "intel_uncore" Module Alias: "pci:v00008086d00000100sv00001565sd00003108bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.whs6eoDXh18 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c12 "6 Series/C200 Series Chipset Family PCI Express Root Port 2" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0xb5 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00008086d00001C12sv00001565sd00003108bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 401.0: 11200 TV Card [Created at pci.386] Unique ID: dtXw.vZ0VfFnzl77 Parent ID: svHJ.2iCxaNjPHbB SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:03:00.0/0000:04:01.0 SysFS BusID: 0000:04:01.0 Hardware Class: tv card Model: "Animation FLY TV PRIME 34FM" Vendor: pci 0x1131 "Philips Semiconductors" Device: pci 0x7134 "SAA7134/SAA7135HL Video Broadcast Decoder" SubVendor: pci 0x5168 "Animation Technologies Inc." SubDevice: pci 0x0138 "FLY TV PRIME 34FM" Revision: 0x01 Driver: "saa7134" Driver Modules: "saa7134" Memory Range: 0xfe400000-0xfe4003ff (rw,non-prefetchable) IRQ: 19 (10 events) Module Alias: "pci:v00001131d00007134sv00005168sd00000138bc04sc80i00" Driver Info #0: Driver Status: saa7134 is active Driver Activation Cmd: "modprobe saa7134" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge) 24: PCI 1a.0: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: pwJ7.AAKXkslzqlF SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c2d "6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x05 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfe606000-0xfe6063ff (rw,non-prefetchable) IRQ: 16 (119 events) Module Alias: "pci:v00008086d00001C2Dsv00001565sd00003108bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1d.0: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 1GTX.ZGjHNtw194D SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c26 "6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0x05 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfe605000-0xfe6053ff (rw,non-prefetchable) IRQ: 23 (284130 events) Module Alias: "pci:v00008086d00001C26sv00001565sd00003108bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.fV8sCDqQ_VF SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 2nd Generation Core Processor Family Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0102 "2nd Generation Core Processor Family Integrated Graphics Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x110d Revision: 0x09 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfe000000-0xfe3fffff (rw,non-prefetchable) Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable) I/O Ports: 0xf000-0xf03f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 31 (14728 events) Module Alias: "pci:v00008086d00000102sv00001565sd0000110Dbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1c.2: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: hoOk.+p9ilOi+bJ4 SysFS ID: /devices/pci0000:00/0000:00:1c.2 SysFS BusID: 0000:00:1c.2 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x3108 Revision: 0xb5 Driver: "pcieport" IRQ: 26 (no events) Module Alias: "pci:v00008086d0000244Esv00001565sd00003108bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.rqwJwO7VhM0 Parent ID: _Znp.fV8sCDqQ_VF Hardware Class: monitor Model: "LG ELECTRONICS L194W " Vendor: GSM "LG ELECTRONICS" Device: eisa 0x4b6a "L194W " Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1280x960@60Hz Resolution: 1152x864@75Hz Resolution: 1440x900@60Hz Size: 408x255 mm Year of Manufacture: 2007 Week of Manufacture: 11 Detailed Timings #0: Resolution: 1440x900 Horizontal: 1440 1520 1672 1904 (+80 +232 +464) +hsync Vertical: 900 903 909 934 (+3 +9 +34) -vsync Frequencies: 106.50 MHz, 55.93 kHz, 59.89 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 28-83 kHz Bandwidth: 106 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (VGA compatible controller) 30: SCSI 400.0: 10600 Disk [Created at block.245] Unique ID: R8DB.rOtc3s3Nza3 Parent ID: 1GTX.ZGjHNtw194D SysFS ID: /class/block/sdb SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "UFD 2.0 Silicon-Power4G" Vendor: usb 0x090c "UFD 2.0" Device: usb 0x1000 "Silicon-Power4G" Revision: "1100" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdb (/dev/sg1) Device Files: /dev/sdb, /dev/disk/by-label/OpenMandrivaLx_4.2, /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-scsi-0:0:0:0, /dev/disk/by-uuid/2021-02-12-01-11-19-00, /dev/disk/by-id/usb-UFD_2.0_Silicon-Power4G_...-0:0 Device Number: block 8:16-8:31 (char 21:1) Geometry (Logical): CHS 1023/124/62 Size: 7866368 sectors a 512 bytes Capacity: 3 GB (4027580416 bytes) Speed: 480 Mbps Module Alias: "usb:v090Cp1000d1100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Driver Info #1: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 31: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.319cRiC7fLB Parent ID: w7Y8.259q7CNh0lC SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WDC WDS120G2G0A-" Vendor: "WDC" Device: "WDS120G2G0A-" Revision: "0000" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0, /dev/disk/by-id/ata-WDC_WDS120G2G0A-00JH30_... Device Number: block 8:0-8:15 Geometry (Logical): CHS 14594/255/63 Size: 234455040 sectors a 512 bytes Capacity: 111 GB (120040980480 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (IDE interface) 32: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: 33sj.qlAfWJHG6N6 Parent ID: ADDn.4Nx_qoDfSd7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0 SysFS BusID: 1-1.4:1.0 Hardware Class: keyboard Model: "A4Tech KV-300H Isolation Keyboard" Hotplug: USB Vendor: usb 0x09da "A4Tech Co., Ltd." Device: usb 0x0260 "KV-300H Isolation Keyboard" Revision: "2.40" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-event-kbd, /dev/input/by-id/usb-_USB_...-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v09DAp0260d0240dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: FKGF.4Nx_qoDfSd7 Parent ID: pBe4.oLWCeziExdF SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: hub Model: "Intel Integrated Rate Matching Hub" Hotplug: USB Vendor: usb 0x8087 "Intel Corp." Device: usb 0x0024 "Integrated Rate Matching Hub" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 34: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: tGrL.IAey+9UhuK2 Parent ID: FKGF.4Nx_qoDfSd7 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 SysFS BusID: 2-1.2:1.0 Hardware Class: mouse Model: "Pixart Imaging USB OPTICAL MOUSE" Hotplug: USB Vendor: usb 0x093a "Pixart Imaging, Inc." Device: usb 0x2516 "USB OPTICAL MOUSE" Revision: "1.00" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event5, /dev/input/by-id/usb-093a_USB_OPTICAL_...-event-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.0-event-mouse, /dev/input/by-id/usb-093a_USB_OPTICAL_...-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.0-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v093Ap2516d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (Hub) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.tisqRJYDXEC Parent ID: B35A.nMBIQ_5OKN9 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0510dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (USB Controller) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.m2+1uGKvSS5 Parent ID: B35A.nMBIQ_5OKN9 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 3.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0003 "3.0 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Module Alias: "usb:v1D6Bp0003d0510dc09dsc00dp03ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (USB Controller) 37: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: WE6o.ZsFptr4s0Q0 Parent ID: ADDn.4Nx_qoDfSd7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1 SysFS BusID: 1-1.4:1.1 Hardware Class: unknown Model: "A4Tech KV-300H Isolation Keyboard" Hotplug: USB Vendor: usb 0x09da "A4Tech Co., Ltd." Device: usb 0x0260 "KV-300H Isolation Keyboard" Revision: "2.40" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v09DAp0260d0240dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.FHd55n4xKo7 Parent ID: pwJ7.AAKXkslzqlF SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: ADDn.4Nx_qoDfSd7 Parent ID: k4bc.FHd55n4xKo7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: hub Model: "Intel Integrated Rate Matching Hub" Hotplug: USB Vendor: usb 0x8087 "Intel Corp." Device: usb 0x0024 "Integrated Rate Matching Hub" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #38 (Hub) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.oLWCeziExdF Parent ID: 1GTX.ZGjHNtw194D SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 42: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Pentium(R) CPU G620 @ 2.60GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,popcnt,tsc_deadline_timer,xsave,lahf_lm,epb,pti,xsaveopt,dtherm,arat,pln,pts Clock: 2385 MHz BogoMips: 5187.98 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 43: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Pentium(R) CPU G620 @ 2.60GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,popcnt,tsc_deadline_timer,xsave,lahf_lm,epb,pti,xsaveopt,dtherm,arat,pln,pts Clock: 1912 MHz BogoMips: 5187.98 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 44: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 45: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: QObM.ndpeucax6V1 Parent ID: lkKU.WSJoqqBlG0C SysFS ID: /class/net/enp1s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp1s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (Ethernet controller)


Hardware for Linux and BSD

GitHub