09: PCI c00.0: 0280 Network controller [Created at pci.386] Unique ID: zb5c.huWLObTszk3 Parent ID: qTvu.PETkz87jwFF SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Dell Wireless 1490 Dual Band WLAN Mini-Card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4312 "BCM4311 802.11a/b/g" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0007 "Wireless 1490 Dual Band WLAN Mini-Card" Revision: 0x01 Memory Range: 0xfe8fc000-0xfe8fffff (rw,non-prefetchable) IRQ: 17 (55665 events) Module Alias: "pci:v000014E4d00004312sv00001028sd00000007bc02sc80i00" Driver Info #0: Driver Status: ssb is not active Driver Activation Cmd: "modprobe ssb" Driver Info #1: Driver Status: wl is active Driver Activation Cmd: "modprobe wl" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (PCI bridge) 10: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.7gaY77_Uit2 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2828 "82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x6eb0-0x6eb7 (rw) I/O Ports: 0x6eb8-0x6ebb (rw) I/O Ports: 0x6ec0-0x6ec7 (rw) I/O Ports: 0x6ec8-0x6ecb (rw) I/O Ports: 0x6ee0-0x6eef (rw) I/O Ports: 0xeff0-0xefff (rw) IRQ: 17 (55665 events) Module Alias: "pci:v00008086d00002828sv00001028sd000001F9bc01sc01i8F" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.NPaE00uItUE SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283f "82801H (ICH8 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "pcieport" IRQ: 16 (15212 events) Module Alias: "pci:v00008086d0000283Fsv00001028sd000001F9bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 900.0: 0200 Ethernet controller [Created at pci.386] Unique ID: 9Ky7.pAz96KNzBR8 Parent ID: HnsE.XY0kpi3M8K2 SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Broadcom NetXtreme BCM5755M Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1673 "NetXtreme BCM5755M Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 Memory Range: 0xfe7f0000-0xfe7fffff (rw,non-prefetchable) IRQ: 25 (7474 events) HW Address: D0EC0477959CC687681E8B57BB2D00B9 Permanent HW Address: D0EC0477959CC687681E8B57BB2D00B9 Link detected: yes Module Alias: "pci:v000014E4d00001673sv00001028sd000001F9bc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 13: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.oy0XXkDTY7E SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2835 "82801H (ICH8 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f00-0x6f1f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002835sv00001028sd000001F9bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.ANceYMj4etB SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801HM (ICH8M) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2815 "82801HM (ICH8M) LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002815sv00001028sd000001F9bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.kIFXcSleRbC SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2831 "82801H (ICH8 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f60-0x6f7f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002831sv00001028sd000001F9bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1c.5: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: HnsE.XY0kpi3M8K2 SysFS ID: /devices/pci0000:00/0000:00:1c.5 SysFS BusID: 0000:00:1c.5 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 6" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2849 "82801H (ICH8 Family) PCI Express Port 6" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "pcieport" IRQ: 17 (55665 events) Module Alias: "pci:v00008086d00002849sv00001028sd000001F9bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.mFkxFx+UM24 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile GM965/GL960 Integrated Graphics Controller (secondary)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a03 "Mobile GM965/GL960 Integrated Graphics Controller (secondary)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x0c Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002A03sv00001028sd000001F9bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.0CMh_00Dca3 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell Latitude D630" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 "Latitude D630" Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9fc000-0xfe9fffff (rw,non-prefetchable) IRQ: 24 (372 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001F9bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.DjcfeiweRZ3 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0xf2 Module Alias: "pci:v00008086d00002448sv00001028sd000001F9bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.T6PhNMe8iOE SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801H (ICH8 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283e "82801H (ICH8 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xfe9fbf00-0xfe9fbfff (rw,non-prefetchable) I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (55665 events) Module Alias: "pci:v00008086d0000283Esv00001028sd000001F9bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.GR8Zxm9AMF2 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile PM965/GM965/GL960 Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a00 "Mobile PM965/GM965/GL960 Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x0c Module Alias: "pci:v00008086d00002A00sv00001028sd000001F9bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.PETkz87jwFF SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2841 "82801H (ICH8 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "pcieport" IRQ: 17 (55665 events) Module Alias: "pci:v00008086d00002841sv00001028sd000001F9bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 301.4: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: PKI7.iGAwJFHKtMF Parent ID: 6NW+.DjcfeiweRZ3 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.4 SysFS BusID: 0000:03:01.4 Hardware Class: firewire controller Model: "O2 Micro Firewire (IEEE 1394)" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x00f7 "Firewire (IEEE 1394)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xfe6ff000-0xfe6fffff (rw,non-prefetchable) Memory Range: 0xfe6fe800-0xfe6fefff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d000000F7sv00001028sd000001F9bc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (PCI bridge) 24: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.gIXg2V_v2CD SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2850 "82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0x6fa0-0x6faf (rw) IRQ: 16 (15212 events) Module Alias: "pci:v00008086d00002850sv00001028sd000001F9bc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.FjBH51tLzzC SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2832 "82801H (ICH8 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f40-0x6f5f (rw) IRQ: 22 (77 events) Module Alias: "pci:v00008086d00002832sv00001028sd000001F9bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.HY4n2A6m0lD SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2834 "82801H (ICH8 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f20-0x6f3f (rw) IRQ: 20 (482 events) Module Alias: "pci:v00008086d00002834sv00001028sd000001F9bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 301.0: 0607 CardBus bridge [Created at pci.386] Unique ID: x0Ln.JPFn1N4PcD7 Parent ID: 6NW+.DjcfeiweRZ3 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: bridge Model: "O2 Micro Cardbus bridge" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x7135 "Cardbus bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x21 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0x84000000-0x84000fff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d00007135sv00001028sd000001F9bc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (PCI bridge) 28: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.DuIn7udxvCC SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2830 "82801H (ICH8 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f80-0x6f9f (rw) IRQ: 20 (482 events) Module Alias: "pci:v00008086d00002830sv00001028sd000001F9bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.t1LSDbeziS3 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283a "82801H (ICH8 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c400-0xfed1c7ff (rw,non-prefetchable) IRQ: 22 (77 events) Module Alias: "pci:v00008086d0000283Asv00001028sd000001F9bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.FpMJM5jq4RE SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Dell Latitude D630" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a02 "965 GM" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 "Latitude D630" Revision: 0x0c Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea00000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xefe8-0xefef (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (15212 events) Module Alias: "pci:v00008086d00002A02sv00001028sd000001F9bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.pNZSINqwbL3 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2836 "82801H (ICH8 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c000-0xfed1c3ff (rw,non-prefetchable) IRQ: 20 (482 events) Module Alias: "pci:v00008086d00002836sv00001028sd000001F9bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR._fLgdlh9AO5 Parent ID: _Znp.FpMJM5jq4RE Hardware Class: monitor Model: "UD490 141W1 LCD Monitor" Vendor: SEC "UD490 141W1" Device: eisa 0x3157 Serial ID: -- Resolution: 1280x800@60Hz Size: 303x190 mm Year of Manufacture: 2005 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1280x800 Horizontal: 1280 1292 1356 1408 (+12 +76 +128) -hsync Vertical: 800 803 806 816 (+3 +6 +16) -vsync Frequencies: 68.93 MHz, 48.96 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (VGA compatible controller) 34: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.259] Unique ID: KD9E.B_gH4dt53gD Parent ID: 3p2J.gIXg2V_v2CD SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "Optiarc DVD+-RW AD-5540A" Vendor: "Optiarc" Device: "DVD+-RW AD-5540A" Revision: "103C" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/disk/by-id/ata-Optiarc_DVD+_-RW_..., /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.1-ata-1.0, /dev/disk/by-path/pci-0000:00:1f.1-ata-1 Device Number: block 11:0 (char 21:0) Features: DVD Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (IDE interface) Drive Speed: 24 35: IDE 200.0: 10600 Disk [Created at block.255] Unique ID: 3OOL.Spua6EwNvLA Parent ID: w7Y8.7gaY77_Uit2 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "HGST HTS541075A9" Vendor: "HGST" Device: "HTS541075A9" Revision: "A590" Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-HGST_HTS541075A9E680_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 Device Number: block 8:0-8:15 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (IDE interface) 36: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: WOTD.Oqk5p9nndT1 Parent ID: datd.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0 SysFS BusID: 7-1.2:1.0 Hardware Class: chipcard Model: "O2 Micro OZ776 CCID Smartcard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7772 "OZ776 CCID Smartcard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7772d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #42 (Hub) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.kIFXcSleRbC SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (USB Controller) 38: USB 00.1: 11500 Bluetooth Device [Created at usb.122] Unique ID: DlBy.Ih8Guy4gXY8 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1 SysFS BusID: 3-2:1.1 Hardware Class: bluetooth Model: "Dell Wireless 360 Bluetooth" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x8140 "Wireless 360 Bluetooth" Revision: "48.70" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v413Cp8140d4870dcE0dsc01dp01icE0isc01ip01in01" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.HY4n2A6m0lD SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (USB Controller) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.FjBH51tLzzC SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.oy0XXkDTY7E SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (USB Controller) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: datd.ZrTiaNBpvAA Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0 SysFS BusID: 7-1:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 44: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.t1LSDbeziS3 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (USB Controller) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.DuIn7udxvCC SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (USB Controller) 47: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.pNZSINqwbL3 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.19" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0519dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 48: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: 9ui9.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:67 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 49: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint Stick" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint Stick" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4 Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 50: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint TouchPad" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint TouchPad" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event5, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 51: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.10 "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 1995 MHz BogoMips: 3989.82 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 52: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.10 "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 2108 MHz BogoMips: 3989.82 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 53: Serial 00.0: 10801 Console [Created at kbd.178] Unique ID: ReDs.5lXXuQkv_C5 Hardware Class: keyboard Model: "serial console" Device: "serial console" Device File: /dev/tty2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: qzC0.ndpeucax6V1 Parent ID: 9Ky7.pAz96KNzBR8 SysFS ID: /class/net/enp9s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 HW Address: D0EC0477959CC687681E8B57BB2D00B9 Permanent HW Address: D0EC0477959CC687681E8B57BB2D00B9 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (Ethernet controller) 55: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown