Probe #a1004894e9 of Foxconn A88GMV Desktop Computer

Log: hwinfo

11: PCI 18.3: 0600 Host bridge [Created at pci.386] Unique ID: Fhhh.+V6VV7woehA SysFS ID: /devices/pci0000:00/0000:00:18.3 SysFS BusID: 0000:00:18.3 Hardware Class: bridge Model: "AMD Family 10h Processor Miscellaneous Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1203 "Family 10h Processor Miscellaneous Control" Driver: "k10temp" Driver Modules: "k10temp" Module Alias: "pci:v00001022d00001203sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: k10temp is active Driver Activation Cmd: "modprobe k10temp" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 13.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 06bT.PBoRvnalNQA SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4396 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfeafb400-0xfeafb4ff (rw,non-prefetchable) IRQ: 19 (135460 events) Module Alias: "pci:v00001002d00004396sv00001002sd00004396bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 18.1: 0600 Host bridge [Created at pci.386] Unique ID: W1j0.zgD+X_gObw9 SysFS ID: /devices/pci0000:00/0000:00:18.1 SysFS BusID: 0000:00:18.1 Hardware Class: bridge Model: "AMD Family 10h Processor Address Map" Vendor: pci 0x1022 "AMD" Device: pci 0x1201 "Family 10h Processor Address Map" Module Alias: "pci:v00001022d00001201sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.Ppijeuwy6IC Parent ID: H0_h.CCSYCj_GOD2 SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Revision: 0x06 Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 I/O Ports: 0xd800-0xd8ff (rw) Memory Range: 0xfbffb000-0xfbffbfff (ro,non-prefetchable) Memory Range: 0xfbffc000-0xfbffffff (ro,non-prefetchable) IRQ: 18 (7 events) HW Address: 28151EB25878A4688D24D693E6024C15 Permanent HW Address: 28151EB25878A4688D24D693E6024C15 Link detected: no Module Alias: "pci:v000010ECd00008168sv0000105Bsd00000E37bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 15: PCI 14.5: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5 SysFS BusID: 0000:00:14.5 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4399 "SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4396 Driver: "ohci-pci" Driver Modules: "ohci_pci" Memory Range: 0xfeaf6000-0xfeaf6fff (rw,non-prefetchable) IRQ: 18 (7 events) Module Alias: "pci:v00001002d00004399sv00001002sd00004396bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is active Driver Activation Cmd: "modprobe ohci-hcd" Driver Info #1: Driver Status: ohci_pci is active Driver Activation Cmd: "modprobe ohci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 306.0: 11100 DVB Card [Created at pci.386] Unique ID: Kaa7.kXehR0AesgA Parent ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:03:06.0 SysFS BusID: 0000:03:06.0 Hardware Class: dvb card Model: "Techsan Electronics B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card" Vendor: pci 0x13d0 "Techsan Electronics Co Ltd" Device: pci 0x2103 "B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card" SubVendor: pci 0x13d0 "Techsan Electronics Co Ltd" SubDevice: pci 0x2103 Revision: 0x02 Driver: "b2c2_flexcop_pci" Driver Modules: "b2c2_flexcop_pci" Memory Range: 0xfebf0000-0xfebfffff (rw,non-prefetchable) I/O Ports: 0xe800-0xe81f (rw) IRQ: 21 (no events) Module Alias: "pci:v000013D0d00002103sv000013D0sd00002103bc02sc80i00" Driver Info #0: Driver Status: b2c2-flexcop-pci is active Driver Activation Cmd: "modprobe b2c2-flexcop-pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (PCI bridge) 17: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: HSco.7WTBbPZqtEF SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ohci-pci" Driver Modules: "ohci_pci" Memory Range: 0xfeaf8000-0xfeaf8fff (rw,non-prefetchable) IRQ: 18 (7 events) Module Alias: "pci:v00001002d00004397sv0000105Bsd00000E37bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is active Driver Activation Cmd: "modprobe ohci-hcd" Driver Info #1: Driver Status: ohci_pci is active Driver Activation Cmd: "modprobe ohci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 14.3: 0601 ISA bridge [Created at pci.386] Unique ID: yX7n.rf7hj3Hs4SB SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB7x0/SB8x0/SB9x0 LPC host controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439d "SB7x0/SB8x0/SB9x0 LPC host controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Module Alias: "pci:v00001002d0000439Dsv0000105Bsd00000E37bc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.6aeO2l0I521 Parent ID: _Znp.fycIm+d9p31 SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GP108 [GeForce GT 1030]" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x1d01 "GP108 [GeForce GT 1030]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8621 Revision: 0xa1 Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xce000000-0xcfffffff (ro,non-prefetchable) I/O Ports: 0xc800-0xc87f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 10 (no events) Module Alias: "pci:v000010DEd00001D01sv00001043sd00008621bc03sc00i00" Driver Info #0: Driver Status: nouveau is not active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (PCI bridge) 20: PCI 14.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: Eu86.PkPmO7mxuc8 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 IDE Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439c "SB7x0/SB8x0/SB9x0 IDE Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (1395 events) Module Alias: "pci:v00001002d0000439Csv0000105Bsd00000E37bc01sc01i8A" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Driver Info #2: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 12.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: x_X+.s5KXFPz2_Q6 SysFS ID: /devices/pci0000:00/0000:00:12.2 SysFS BusID: 0000:00:12.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfeafb800-0xfeafb8ff (rw,non-prefetchable) IRQ: 17 (2 events) Module Alias: "pci:v00001002d00004396sv0000105Bsd00000E37bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.ZHzyllNXxp3 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "AMD RS880 Host Bridge" Vendor: pci 0x1022 "AMD" Device: pci 0x9601 "RS880 Host Bridge" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Module Alias: "pci:v00001022d00009601sv0000105Bsd00000E37bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 18.4: 0600 Host bridge [Created at pci.386] Unique ID: 60BX.Ww2F_h1WA4B SysFS ID: /devices/pci0000:00/0000:00:18.4 SysFS BusID: 0000:00:18.4 Hardware Class: bridge Model: "AMD Family 10h Processor Link Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1204 "Family 10h Processor Link Control" Module Alias: "pci:v00001022d00001204sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 12.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: CLZK.7WTBbPZqtEF SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ohci-pci" Driver Modules: "ohci_pci" Memory Range: 0xfeafa000-0xfeafafff (rw,non-prefetchable) IRQ: 16 (1395 events) Module Alias: "pci:v00001002d00004397sv0000105Bsd00000E37bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is active Driver Activation Cmd: "modprobe ohci-hcd" Driver Info #1: Driver Status: ohci_pci is active Driver Activation Cmd: "modprobe ohci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 18.2: 0600 Host bridge [Created at pci.386] Unique ID: OMCs.U5Al0Zo57JA SysFS ID: /devices/pci0000:00/0000:00:18.2 SysFS BusID: 0000:00:18.2 Hardware Class: bridge Model: "AMD Family 10h Processor DRAM Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1202 "Family 10h Processor DRAM Controller" Module Alias: "pci:v00001022d00001202sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 06.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: H0_h.CCSYCj_GOD2 SysFS ID: /devices/pci0000:00/0000:00:06.0 SysFS BusID: 0000:00:06.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (PCIE port 2)" Vendor: pci 0x1022 "AMD" Device: pci 0x9606 "RS780 PCI to PCI bridge (PCIE port 2)" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "pcieport" IRQ: 18 (7 events) Module Alias: "pci:v00001022d00009606sv0000105Bsd00000E37bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 9n5e.ewPx3_gXPdF SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ohci-pci" Driver Modules: "ohci_pci" Memory Range: 0xfeaf7000-0xfeaf7fff (rw,non-prefetchable) IRQ: 18 (7 events) Module Alias: "pci:v00001002d00004398sv0000105Bsd00000E37bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is active Driver Activation Cmd: "modprobe ohci-hcd" Driver Info #1: Driver Status: ohci_pci is active Driver Activation Cmd: "modprobe ohci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 18.0: 0600 Host bridge [Created at pci.386] Unique ID: fiDB.SGHF3QZh3Y9 SysFS ID: /devices/pci0000:00/0000:00:18.0 SysFS BusID: 0000:00:18.0 Hardware Class: bridge Model: "AMD Family 10h Processor HyperTransport Configuration" Vendor: pci 0x1022 "AMD" Device: pci 0x1200 "Family 10h Processor HyperTransport Configuration" Module Alias: "pci:v00001022d00001200sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 100.1: 0403 Audio device [Created at pci.386] Unique ID: NXNs.37lvSmA_Kr1 Parent ID: _Znp.fycIm+d9p31 SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: "nVidia GP108 High Definition Audio Controller" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0fb8 "GP108 High Definition Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8621 Revision: 0xa1 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfcf7c000-0xfcf7ffff (rw,non-prefetchable) IRQ: 19 (135460 events) Module Alias: "pci:v000010DEd00000FB8sv00001043sd00008621bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (PCI bridge) 31: PCI 14.2: 0403 Audio device [Created at pci.386] Unique ID: 5Dex.RLMojJ4wvl8 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfeaf0000-0xfeaf3fff (rw,non-prefetchable) IRQ: 16 (1395 events) Module Alias: "pci:v00001002d00004383sv0000105Bsd00000E37bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 11.0: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: 7EWs.f5fUzCs5IR2 SysFS ID: /devices/pci0000:00/0000:00:11.0 SysFS BusID: 0000:00:11.0 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4390 "SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xb000-0xb007 (rw) I/O Ports: 0xa000-0xa003 (rw) I/O Ports: 0x9000-0x9007 (rw) I/O Ports: 0x8000-0x8003 (rw) I/O Ports: 0x7000-0x700f (rw) Memory Range: 0xfeafbc00-0xfeafbfff (rw,non-prefetchable) IRQ: 22 (954 events) Module Alias: "pci:v00001002d00004390sv0000105Bsd00000E37bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: PCI 02.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: _Znp.fycIm+d9p31 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (ext gfx port 0)" Vendor: pci 0x1022 "AMD" Device: pci 0x9603 "RS780 PCI to PCI bridge (ext gfx port 0)" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "pcieport" IRQ: 18 (7 events) Module Alias: "pci:v00001022d00009603sv0000105Bsd00000E37bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 34: PCI 14.0: 0c05 SMBus [Created at pci.386] Unique ID: MZfG.Ziu3Dz4wnr8 SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Revision: 0x3c Module Alias: "pci:v00001002d00004385sv0000105Bsd00000E37bc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Config Status: cfg=new, avail=yes, need=no, active=unknown 35: PCI 12.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 4g2A.ewPx3_gXPdF SysFS ID: /devices/pci0000:00/0000:00:12.1 SysFS BusID: 0000:00:12.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0e37 Driver: "ohci-pci" Driver Modules: "ohci_pci" Memory Range: 0xfeaf9000-0xfeaf9fff (rw,non-prefetchable) IRQ: 16 (1395 events) Module Alias: "pci:v00001002d00004398sv0000105Bsd00000E37bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is active Driver Activation Cmd: "modprobe ohci-hcd" Driver Info #1: Driver Status: ohci_pci is active Driver Activation Cmd: "modprobe ohci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 37: IDE 500.0: 10600 Disk [Created at block.245] Unique ID: LHfg.rK_dJt3s602 Parent ID: 7EWs.f5fUzCs5IR2 SysFS ID: /class/block/sdf SysFS BusID: 5:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata6/host5/target5:0:0/5:0:0:0 Hardware Class: disk Model: "CT120BX500SSD1" Device: "CT120BX500SSD1" Revision: "R013" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci", "sd_mod" Device File: /dev/sdf Device Files: /dev/sdf, /dev/disk/by-path/pci-0000:00:11.0-ata-4.0, /dev/disk/by-path/pci-0000:00:11.0-ata-4, /dev/disk/by-id/ata-CT120BX500SSD1_... Device Number: block 8:80-8:95 Geometry (Logical): CHS 14593/255/63 Size: 234441648 sectors a 512 bytes Capacity: 111 GB (120034123776 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 38: IDE 300.0: 10600 Disk [Created at block.245] Unique ID: Rw8Y.07PpUIUEkN0 Parent ID: 7EWs.f5fUzCs5IR2 SysFS ID: /class/block/sdd SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "WDC WD2500AAKS-0" Vendor: "WDC" Device: "WD2500AAKS-0" Revision: "1B01" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci", "sd_mod" Device File: /dev/sdd Device Files: /dev/sdd, /dev/disk/by-id/wwn-0x..., /dev/disk/by-id/ata-WDC_WD2500AAKS-00VSA0_..., /dev/disk/by-path/pci-0000:00:11.0-ata-2.0, /dev/disk/by-path/pci-0000:00:11.0-ata-2 Device Number: block 8:48-8:63 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Capacity: 232 GB (250059350016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 39: IDE 100.0: 10600 Disk [Created at block.245] Unique ID: WZeP.xhHdeT4pPd8 Parent ID: Eu86.PkPmO7mxuc8 SysFS ID: /class/block/sdb SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: disk Model: "Maxtor 6L200P0" Vendor: "Maxtor" Device: "6L200P0" Revision: "1G10" Serial ID: -- Driver: "pata_atiixp", "sd" Driver Modules: "pata_atiixp", "sd_mod" Device File: /dev/sdb Device Files: /dev/sdb, /dev/disk/by-path/pci-0000:00:14.1-ata-2.0, /dev/disk/by-id/ata-Maxtor_6L200P0_..., /dev/disk/by-path/pci-0000:00:14.1-ata-2 Device Number: block 8:16-8:31 Geometry (Logical): CHS 24792/255/63 Size: 398297088 sectors a 512 bytes Capacity: 189 GB (203928109056 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (IDE interface) 40: SCSI 101.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.rTMaySzN+L5 Parent ID: Eu86.PkPmO7mxuc8 SysFS ID: /class/block/sr0 SysFS BusID: 1:0:1:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata2/host1/target1:0:1/1:0:1:0 Hardware Class: cdrom Model: "HL-DT-ST DVDRAM GSA-4167B" Vendor: "HL-DT-ST" Device: "DVDRAM GSA-4167B" Revision: "DL13" Driver: "pata_atiixp", "sr" Driver Modules: "pata_atiixp", "sr_mod" Device File: /dev/sr0 (/dev/sg2) Device Files: /dev/sr0, /dev/disk/by-path/pci-0000:00:14.1-ata-2.1, /dev/dvdrw, /dev/cdrw, /dev/disk/by-id/ata-HL-DT-ST_DVDRAM_GSA-4167B_..., /dev/dvd, /dev/cdrom Device Number: block 11:0 (char 21:2) Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (IDE interface) Drive Speed: 48 41: SCSI 600.0: 10600 Disk [Created at block.245] Unique ID: Zj8l.G1Eoiqx2BHA Parent ID: 06bT.PBoRvnalNQA SysFS ID: /class/block/sdg SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "SanDisk Cruzer Glide 3.0" Vendor: usb 0x0781 "SanDisk" Device: usb 0x5597 "Cruzer Glide 3.0" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdg (/dev/sg7) Device Files: /dev/sdg, /dev/disk/by-path/pci-0000:00:13.2-usb-0:4:1.0-scsi-0:0:0:0, /dev/disk/by-id/usb-SanDisk_Cruzer_Glide_3.0_...-0:0 Device Number: block 8:96-8:111 (char 21:7) Geometry (Logical): CHS 30528/64/32 Size: 62521344 sectors a 512 bytes Capacity: 29 GB (32010928128 bytes) Speed: 480 Mbps Module Alias: "usb:v0781p5597d0100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (USB Controller) 42: IDE 400.0: 10600 Disk [Created at block.245] Unique ID: u5Pc.MUNRYiI1qB7 Parent ID: 7EWs.f5fUzCs5IR2 SysFS ID: /class/block/sde SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata5/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "CT120BX500SSD1" Device: "CT120BX500SSD1" Revision: "R013" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci", "sd_mod" Device File: /dev/sde Device Files: /dev/sde, /dev/disk/by-path/pci-0000:00:11.0-ata-3, /dev/disk/by-path/pci-0000:00:11.0-ata-3.0, /dev/disk/by-id/ata-CT120BX500SSD1_... Device Number: block 8:64-8:79 Geometry (Logical): CHS 14593/255/63 Size: 234441648 sectors a 512 bytes Capacity: 111 GB (120034123776 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 43: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: _kuT.+0PoZ3+nki0 Parent ID: 7EWs.f5fUzCs5IR2 SysFS ID: /class/block/sdc SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "ST3500630AS" Device: "ST3500630AS" Revision: "C" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci", "sd_mod" Device File: /dev/sdc Device Files: /dev/sdc, /dev/disk/by-id/ata-ST3500630AS_..., /dev/disk/by-path/pci-0000:00:11.0-ata-1, /dev/disk/by-path/pci-0000:00:11.0-ata-1.0 Device Number: block 8:32-8:47 Geometry (Logical): CHS 60801/255/63 Size: 976773168 sectors a 512 bytes Capacity: 465 GB (500107862016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 44: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.EJZ_ea+HIv3 Parent ID: Eu86.PkPmO7mxuc8 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "OCZ-AGILITY3" Device: "OCZ-AGILITY3" Revision: "2.25" Serial ID: -- Driver: "pata_atiixp", "sd" Driver Modules: "pata_atiixp", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-OCZ-AGILITY3_..., /dev/disk/by-path/pci-0000:00:14.1-ata-1.0, /dev/disk/by-path/pci-0000:00:14.1-ata-1, /dev/disk/by-id/wwn-0x... Device Number: block 8:0-8:15 Geometry (Logical): CHS 14593/255/63 Size: 234441648 sectors a 512 bytes Capacity: 111 GB (120034123776 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (IDE interface) 45: None 00.0: 10600 Disk [Created at block.245] Unique ID: OKyR.Fxp0d3BezAE SysFS ID: /class/block/zram0 Hardware Class: disk Model: "Disk" Device File: /dev/zram0 Device Number: block 253:0 Size: 1017984 sectors a 4096 bytes Capacity: 3 GB (4169662464 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 47: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: CiZ2.qlAfWJHG6N6 Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0 SysFS BusID: 3-3:1.0 Hardware Class: keyboard Model: "A4Tech KV-300H Isolation Keyboard" Hotplug: USB Vendor: usb 0x09da "A4Tech Co., Ltd." Device: usb 0x0260 "KV-300H Isolation Keyboard" Revision: "2.40" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.0-event-kbd, /dev/input/by-id/usb-_USB_...-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v09DAp0260d0240dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #49 (Hub) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.PaupGMfzSp8 Parent ID: 9n5e.ewPx3_gXPdF SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.7qWCOCfUJwE Parent ID: CLZK.7WTBbPZqtEF SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 50: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: +rmv.UCa7UpvPuhA Parent ID: pBe4.3f5c44ENLJ9 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0 SysFS BusID: 2-5:1.0 Hardware Class: network Model: "Qualcomm Atheros TP-Link TL-WN322G v3 / TL-WN422G v2 802.11g [Atheros AR9271]" Hotplug: USB Vendor: usb 0x0cf3 "Qualcomm Atheros Communications" Device: usb 0x1006 "TP-Link TL-WN322G v3 / TL-WN422G v2 802.11g [Atheros AR9271]" Revision: "1.08" Serial ID: -- Driver: "ath9k_htc" Driver Modules: "ath9k_htc" Device File: wlp0s19f2u5 Features: WLAN Speed: 480 Mbps HW Address: 122A51AD307F23DCF59A8F2CE9F018D6 Permanent HW Address: 122A51AD307F23DCF59A8F2CE9F018D6 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v0CF3p1006d0108dcFFdscFFdpFFicFFisc00ip00in00" Driver Info #0: Driver Status: ath9k_htc is active Driver Activation Cmd: "modprobe ath9k_htc" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #59 (Hub) 51: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: 98zw.p97M69KhO96 Parent ID: R_O4.g5rjI1SjqE3 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.3/2-6.3:1.1 SysFS BusID: 2-6.3:1.1 Hardware Class: unknown Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "22.00" Driver: "usbhid" Driver Modules: "usbhid" Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd2200dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #54 (Hub) 52: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT._WUAGn1cSY8 Parent ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (USB Controller) 53: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: ftp6.ZsFptr4s0Q0 Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1 SysFS BusID: 3-3:1.1 Hardware Class: unknown Model: "A4Tech KV-300H Isolation Keyboard" Hotplug: USB Vendor: usb 0x09da "A4Tech Co., Ltd." Device: usb 0x0260 "KV-300H Isolation Keyboard" Revision: "2.40" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v09DAp0260d0240dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #49 (Hub) 54: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: R_O4.g5rjI1SjqE3 Parent ID: pBe4.3f5c44ENLJ9 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6:1.0 SysFS BusID: 2-6:1.0 Hardware Class: hub Model: "VIA USB2.0 Hub" Hotplug: USB Vendor: usb 0x2109 "VIA Labs, Inc." Device: usb 0x2817 "USB2.0 Hub" Revision: "4.94" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v2109p2817d0494dc09dsc00dp02ic09isc00ip02in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #59 (Hub) 55: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.uYbnlyRCGC6 Parent ID: 4g2A.ewPx3_gXPdF SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (USB Controller) 56: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.YdoZZg0c8i6 Parent ID: x_X+.s5KXFPz2_Q6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 57: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.erpEvbsFWX1 Parent ID: HSco.7WTBbPZqtEF SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 58: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: hyis.+i6cPjf42e0 Parent ID: R_O4.g5rjI1SjqE3 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.3/2-6.3:1.0 SysFS BusID: 2-6.3:1.0 Hardware Class: mouse Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "22.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd2200dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #54 (Hub) 59: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.3f5c44ENLJ9 Parent ID: 06bT.PBoRvnalNQA SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (USB Controller) 60: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.6.3 "AMD Athlon(tm) II X2 270 Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 3400 MHz BogoMips: 6800.33 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 61: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.6.3 "AMD Athlon(tm) II X2 270 Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 3400 MHz BogoMips: 6800.33 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 62: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 63: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.Ppijeuwy6IC SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 HW Address: 28151EB25878A4688D24D693E6024C15 Permanent HW Address: 28151EB25878A4688D24D693E6024C15 Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (Ethernet controller) 64: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: dCU4.ndpeucax6V1 Parent ID: +rmv.UCa7UpvPuhA SysFS ID: /class/net/wlp0s19f2u5 SysFS Device Link: /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "ath9k_htc" Driver Modules: "ath9k_htc" Device File: wlp0s19f2u5 HW Address: 122A51AD307F23DCF59A8F2CE9F018D6 Permanent HW Address: 122A51AD307F23DCF59A8F2CE9F018D6 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #50 (WLAN controller)


Hardware for Linux and BSD

GitHub