05: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.mjeFuN+yoV8 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel NM10/ICH7 Family SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c0 "NM10/ICH7 Family SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xb400-0xb407 (rw) I/O Ports: 0xb080-0xb083 (rw) I/O Ports: 0xb000-0xb007 (rw) I/O Ports: 0xac00-0xac03 (rw) I/O Ports: 0xa880-0xa88f (rw) IRQ: 19 (88899 events) Module Alias: "pci:v00008086d000027C0sv00001043sd00008179bc01sc01i8F" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 06: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.PZ1iPLkcHs2 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00008086d000027D0sv00001043sd00008179bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbc00-0xbc1f (rw) IRQ: 16 (no events) Module Alias: "pci:v00008086d000027CBsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.U_2bbqNXXI4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b8 "82801GB/GR (ICH7 Family) LPC Interface Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B8sv00001043sd00008179bc06sc01i00" Driver Info #0: Driver Status: intel_rng is not active Driver Activation Cmd: "modprobe intel_rng" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #2: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.7jPWmoeCYd4 Parent ID: hoOk.TDphKdCROO4 SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x83a3 "M4A785/P7P55 Motherboard" Revision: 0x03 Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 I/O Ports: 0xd800-0xd8ff (rw) Memory Range: 0xf8fff000-0xf8ffffff (ro,non-prefetchable) Memory Range: 0xf8ff8000-0xf8ffbfff (ro,non-prefetchable) Memory Range: 0xfebf0000-0xfebfffff (ro,non-prefetchable,disabled) IRQ: 18 (no events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v000010ECd00008168sv00001043sd000083A3bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (PCI bridge) 10: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.hbjCRhwKJE0 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel 82G33/G31/P35/P31 Express PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c1 "82G33/G31/P35/P31 Express PCI Express Root Port" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82b0 Revision: 0x10 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00008086d000029C1sv00001043sd000082B0bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xb800-0xb81f (rw) IRQ: 19 (88899 events) Module Alias: "pci:v00008086d000027C9sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.gIx_XfvB7A9 Parent ID: vSkL.hbjCRhwKJE0 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia G96C [GeForce 9500 GT]" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0640 "G96C [GeForce 9500 GT]" Revision: 0xa1 Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xfa000000-0xfbffffff (rw,non-prefetchable) I/O Ports: 0xcc00-0xcc7f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 11 (no events) Module Alias: "pci:v000010DEd00000640sv00000000sd00000000bc03sc00i00" Driver Info #0: Driver Status: nvidiafb is not active Driver Activation Cmd: "modprobe nvidiafb" Driver Info #1: Driver Status: nouveau is active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) 13: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.upGwwJBzz2F SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x83a1 Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf9ffc000-0xf9ffffff (rw,non-prefetchable) IRQ: 28 (885 events) Module Alias: "pci:v00008086d000027D8sv00001043sd000083A1bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.zXRvsg0ka5E SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0xe1 Module Alias: "pci:v00008086d0000244Esv00001043sd00008179bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.AqEO3v7RvY5 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x400-0x41f (rw) IRQ: 19 (88899 events) Module Alias: "pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.6L0dv+nPzM3 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82G33/G31/P35/P31 Express DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c0 "82G33/G31/P35/P31 Express DRAM Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82b0 "P5KPL-VM Motherboard" Revision: 0x10 Module Alias: "pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 401.0: 0700 Serial controller [Created at pci.386] Unique ID: dtXw.LWiqWKJycs5 Parent ID: 6NW+.zXRvsg0ka5E SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:04:01.0 SysFS BusID: 0000:04:01.0 Hardware Class: unknown Model: "Moxa Smartio C168H/PCI" Vendor: pci 0x1393 "Moxa Technologies Co Ltd" Device: pci 0x1680 "Smartio C168H/PCI" SubVendor: pci 0x1393 "Moxa Technologies Co Ltd" SubDevice: pci 0x1680 Revision: 0x02 Driver: "mxser" Driver Modules: "mxser" I/O Ports: 0xec00-0xec7f (rw) I/O Ports: 0xe880-0xe8bf (rw) I/O Ports: 0xe800-0xe80f (rw) IRQ: 23 (20 events) Module Alias: "pci:v00001393d00001680sv00001393sd00001680bc07sc00i80" Driver Info #0: Driver Status: mxser is active Driver Activation Cmd: "modprobe mxser" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (PCI bridge) 18: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.gd5eUdx1QNF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801G (ICH7 Family) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27df "82801G (ICH7 Family) IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xffa0-0xffaf (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027DFsv00001043sd00008179bc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xb880-0xb89f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027CAsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xb480-0xb49f (rw) IRQ: 23 (20 events) Module Alias: "pci:v00008086d000027C8sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "ehci-pci" Memory Range: 0xf9ffbc00-0xf9ffbfff (rw,non-prefetchable) IRQ: 23 (20 events) Module Alias: "pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1c.2: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: hoOk.TDphKdCROO4 SysFS ID: /devices/pci0000:00/0000:00:1c.2 SysFS BusID: 0000:00:1c.2 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d4 "NM10/ICH7 Family PCI Express Port 3" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 26 (no events) Module Alias: "pci:v00008086d000027D4sv00001043sd00008179bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: IDE 201.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.K+CWhR1ss57 Parent ID: w7Y8.mjeFuN+yoV8 SysFS ID: /class/block/sda SysFS BusID: 2:0:1:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:1/2:0:1:0 Hardware Class: disk Model: "Hitachi HDS72102" Vendor: "Hitachi" Device: "HDS72102" Revision: "A3EA" Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (IDE interface) 24: USB 00.1: 0401 Multimedia audio controller [Created at usb.122] Unique ID: DlBy.LYcFUM3jBW1 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1 SysFS BusID: 3-2:1.1 Hardware Class: sound Model: "Pixart Imaging Multimedia audio controller" Hotplug: USB Vendor: usb 0x093a "Pixart Imaging, Inc." Device: usb 0x2629 Revision: "1.00" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v093Ap2629d0100dc00dsc00dp00ic01isc01ip00in01" Driver Info #0: Driver Status: gspca_pac7302 is active Driver Activation Cmd: "modprobe gspca_pac7302" Driver Info #1: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (Hub) 25: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.08" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0508dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 26: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.08" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0508dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 28: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.08" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0508dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 29: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: mZxt.mOytf_zfjc9 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: unknown Model: "Pixart Imaging Unclassified device" Hotplug: USB Vendor: usb 0x093a "Pixart Imaging, Inc." Device: usb 0x2629 Revision: "1.00" Driver: "gspca_pac7302" Driver Modules: "gspca_pac7302" Speed: 12 Mbps Module Alias: "usb:v093Ap2629d0100dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: gspca_pac7302 is active Driver Activation Cmd: "modprobe gspca_pac7302" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (Hub) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.08" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0508dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #7 (USB Controller) 31: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: ADDn._u66cEA6vcC Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: unknown Model: "Mustek BearPaw 2448 CU Pro" Hotplug: USB Vendor: usb 0x055f "Mustek" Device: usb 0x0408 "BearPaw 2448 CU Pro" Revision: "1.00" Speed: 480 Mbps Module Alias: "usb:v055Fp0408d0100dc00dsc00dp00icFFiscFFipFFin00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (Hub) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.08" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0508dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 33: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,vpid,dtherm Clock: 2339 MHz BogoMips: 5993.79 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 34: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,vpid,dtherm Clock: 2587 MHz BogoMips: 5993.79 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 35: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.7jPWmoeCYd4 SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (Ethernet controller) 36: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown