Probe #b35e7ae1ba of A15HV01 Notebook Computer

Log: hwinfo

03: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.ku_DuSHewh1 Hardware Class: framebuffer Model: "Intel(R)Sandybridge Mobile Graphics Controller" Vendor: "Intel Corporation" Device: "Intel(R)Sandybridge Mobile Graphics Controller" SubVendor: "Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS" SubDevice: Revision: "Hardware Version 0.0" Memory Size: 63 MB + 960 kB Memory Range: 0x00000000-0x03feffff (rw) Mode 0x033c: 1920x1440 (+1920), 8 bits Mode 0x034d: 1920x1440 (+3840), 16 bits Mode 0x035c: 1920x1440 (+7680), 24 bits Mode 0x033a: 1600x1200 (+1600), 8 bits Mode 0x034b: 1600x1200 (+3200), 16 bits Mode 0x035a: 1600x1200 (+6400), 24 bits Mode 0x0307: 1280x1024 (+1280), 8 bits Mode 0x031a: 1280x1024 (+2560), 16 bits Mode 0x031b: 1280x1024 (+5120), 24 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+832), 8 bits Mode 0x0311: 640x480 (+1280), 16 bits Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.2: 0101 IDE interface [Created at pci.378] Unique ID: w7Y8.L5X99oc+Q5A SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c01 "6 Series/C200 Series Chipset Family 4 port SATA IDE Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xf110-0xf117 (rw) I/O Ports: 0xf100-0xf103 (rw) I/O Ports: 0xf0f0-0xf0f7 (rw) I/O Ports: 0xf0e0-0xf0e3 (rw) I/O Ports: 0xf0d0-0xf0df (rw) I/O Ports: 0xf0c0-0xf0cf (rw) IRQ: 19 (478 events) Module Alias: "pci:v00008086d00001C01sv00001297sd00002020bc01sc01i8F" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Driver Info #3: Driver Status: ide_pci_generic is active Driver Activation Cmd: "modprobe ide_pci_generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: z8Q3.cLyBZ_PA3R9 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c10 "6 Series/C200 Series Chipset Family PCI Express Root Port 1" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1c10 Revision: 0xb4 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00008086d00001C10sv00008086sd00001C10bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 200.2: 0805 SD Host controller [Created at pci.378] Unique ID: wi3r.3wY+j6lGn41 Parent ID: qTvu.gP0ZjncysP1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.2 SysFS BusID: 0000:02:00.2 Hardware Class: unknown Model: "JMicron Standard SD Host Controller" Vendor: pci 0x197b "JMicron Technology Corp." Device: pci 0x2381 "Standard SD Host Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x80 Memory Range: 0xf7d05000-0xf7d050ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v0000197Bd00002381sv00001297sd00002020bc08sc05i01" Driver Info #0: Driver Status: sdhci_pci is active Driver Activation Cmd: "modprobe sdhci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 17: PCI 1f.0: 0601 ISA bridge [Created at pci.378] Unique ID: BUZT.56RZv__b0p4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel HM65 Express Chipset Family LPC Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c49 "HM65 Express Chipset Family LPC Controller" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1c49 Revision: 0x04 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00001C49sv00008086sd00001C49bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 200.0: 0880 System peripheral [Created at pci.378] Unique ID: B35A._6MWZ563oAF Parent ID: qTvu.gP0ZjncysP1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: unknown Model: "JMicron SD/MMC Host Controller" Vendor: pci 0x197b "JMicron Technology Corp." Device: pci 0x2382 "SD/MMC Host Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x80 Driver: "sdhci-pci" Driver Modules: "sdhci_pci" Memory Range: 0xf7d06000-0xf7d060ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v0000197Bd00002382sv00001297sd00002020bc08sc80i00" Driver Info #0: Driver Status: sdhci_pci is active Driver Activation Cmd: "modprobe sdhci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 19: PCI 16.0: 0780 Communication controller [Created at pci.378] Unique ID: WnlC.4bqGGRx_tF6 SysFS ID: /devices/pci0000:00/0000:00:16.0 SysFS BusID: 0000:00:16.0 Hardware Class: unknown Model: "Intel 6 Series/C200 Series Chipset Family MEI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c3a "6 Series/C200 Series Chipset Family MEI Controller #1" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "mei_me" Driver Modules: "mei_me" Memory Range: 0xf7e09000-0xf7e0900f (rw,non-prefetchable) IRQ: 34 (17 events) Module Alias: "pci:v00008086d00001C3Asv00001297sd00002020bc07sc80i00" Driver Info #0: Driver Status: mei_me is active Driver Activation Cmd: "modprobe mei_me" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 100.0: 0282 WLAN controller [Created at pci.378] Unique ID: yWPJ.rxMLBAixq6B Parent ID: z8Q3.cLyBZ_PA3R9 SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: network Model: "Realtek RTL8191SEvB Wireless LAN Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8172 "RTL8191SEvB Wireless LAN Controller" SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." SubDevice: pci 0x8181 Revision: 0x10 Driver: "rtl8192se" Driver Modules: "rtl8192se" Device File: wlp1s0 Features: WLAN I/O Ports: 0xe000-0xefff (rw) Memory Range: 0xf7200000-0xf7203fff (rw,non-prefetchable) IRQ: 16 (199 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v000010ECd00008172sv000010ECsd00008181bc02sc80i00" Driver Info #0: Driver Status: rtl8192se is active Driver Activation Cmd: "modprobe rtl8192se" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 21: PCI 1b.0: 0403 Audio device [Created at pci.378] Unique ID: u1Nb.AzWI5QAvDG9 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c20 "6 Series/C200 Series Chipset Family High Definition Audio Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf7e00000-0xf7e03fff (rw,non-prefetchable) IRQ: 35 (493 events) Module Alias: "pci:v00008086d00001C20sv00001297sd00002020bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1f.5: 0101 IDE interface [Created at pci.378] Unique ID: W60f.JXSTPdQeC_5 SysFS ID: /devices/pci0000:00/0000:00:1f.5 SysFS BusID: 0000:00:1f.5 Hardware Class: storage Model: "Intel 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c09 "6 Series/C200 Series Chipset Family 2 port SATA IDE Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xf0b0-0xf0b7 (rw) I/O Ports: 0xf0a0-0xf0a3 (rw) I/O Ports: 0xf090-0xf097 (rw) I/O Ports: 0xf080-0xf083 (rw) I/O Ports: 0xf070-0xf07f (rw) I/O Ports: 0xf060-0xf06f (rw) IRQ: 19 (478 events) Module Alias: "pci:v00008086d00001C09sv00001297sd00002020bc01sc01i85" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Driver Info #3: Driver Status: ide_pci_generic is active Driver Activation Cmd: "modprobe ide_pci_generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 200.5: 0200 Ethernet controller [Created at pci.378] Unique ID: _Uic.WB9g+px4qo2 Parent ID: qTvu.gP0ZjncysP1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.5 SysFS BusID: 0000:02:00.5 Hardware Class: network Model: "JMicron JMC250 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x197b "JMicron Technology Corp." Device: pci 0x0250 "JMC250 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x03 Driver: "jme" Driver Modules: "jme" Device File: enp2s0f5 Memory Range: 0xf7d00000-0xf7d03fff (rw,non-prefetchable) I/O Ports: 0xd100-0xd17f (rw) I/O Ports: 0xd000-0xdfff (rw) IRQ: 36 (128 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Module Alias: "pci:v0000197Bd00000250sv00001297sd00002020bc02sc00i00" Driver Info #0: Driver Status: jme is active Driver Activation Cmd: "modprobe jme" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 24: PCI 1f.3: 0c05 SMBus [Created at pci.378] Unique ID: nS1_.M5kXhIaPDq9 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 6 Series/C200 Series Chipset Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c22 "6 Series/C200 Series Chipset Family SMBus Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xf7e05000-0xf7e050ff (rw,non-prefetchable) I/O Ports: 0xf040-0xf05f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d00001C22sv00001297sd00002020bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 00.0: 0600 Host bridge [Created at pci.378] Unique ID: qLht.PfMl2m3ievF SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 2nd Generation Core Processor Family DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0104 "2nd Generation Core Processor Family DRAM Controller" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x0104 Revision: 0x09 Module Alias: "pci:v00008086d00000104sv00008086sd00000104bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: qTvu.gP0ZjncysP1 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c12 "6 Series/C200 Series Chipset Family PCI Express Root Port 2" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1c12 Revision: 0xb4 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00008086d00001C12sv00008086sd00001C12bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 200.3: 0880 System peripheral [Created at pci.378] Unique ID: n1Zg.VXIG2gDmJZF Parent ID: qTvu.gP0ZjncysP1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.3 SysFS BusID: 0000:02:00.3 Hardware Class: unknown Model: "JMicron MS Host Controller" Vendor: pci 0x197b "JMicron Technology Corp." Device: pci 0x2383 "MS Host Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x80 Driver: "jmb38x_ms" Driver Modules: "jmb38x_ms" Memory Range: 0xf7d04000-0xf7d040ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v0000197Bd00002383sv00001297sd00002020bc08sc80i00" Driver Info #0: Driver Status: jmb38x_ms is active Driver Activation Cmd: "modprobe jmb38x_ms" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 28: PCI 1a.0: 0c03 USB Controller (EHCI) [Created at pci.378] Unique ID: pwJ7.VEqXk4Mp7e4 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c2d "6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xf7e07000-0xf7e073ff (rw,non-prefetchable) IRQ: 16 (199 events) Module Alias: "pci:v00008086d00001C2Dsv00001297sd00002020bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 1d.0: 0c03 USB Controller (EHCI) [Created at pci.378] Unique ID: 1GTX.uKDIN5XtRy1 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c26 "6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x04 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xf7e06000-0xf7e063ff (rw,non-prefetchable) IRQ: 23 (31 events) Module Alias: "pci:v00008086d00001C26sv00001297sd00002020bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 1c.4: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: QSNP.sbCeC35Ba14 SysFS ID: /devices/pci0000:00/0000:00:1c.4 SysFS BusID: 0000:00:1c.4 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c18 "6 Series/C200 Series Chipset Family PCI Express Root Port 5" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1c18 Revision: 0xb4 Driver: "pcieport" IRQ: 27 (no events) Module Alias: "pci:v00008086d00001C18sv00008086sd00001C18bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 400.0: 0c03 USB Controller (XHCI) [Created at pci.378] Unique ID: YmUS.nMBIQ_5OKN9 Parent ID: QSNP.sbCeC35Ba14 SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0 SysFS BusID: 0000:04:00.0 Hardware Class: usb controller Model: "ASMedia ASM1042 SuperSpeed USB Host Controller" Vendor: pci 0x1b21 "ASMedia Technology Inc." Device: pci 0x1042 "ASM1042 SuperSpeed USB Host Controller" SubVendor: pci 0x174c SubDevice: pci 0x2104 Driver: "xhci_hcd" Driver Modules: "xhci_pci" Memory Range: 0xf7c00000-0xf7c07fff (rw,non-prefetchable) IRQ: 16 (199 events) Module Alias: "pci:v00001B21d00001042sv0000174Csd00002104bc0Csc03i30" Driver Info #0: Driver Status: xhci_pci is active Driver Activation Cmd: "modprobe xhci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (PCI bridge) 32: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: _Znp.kPZC+u+NCL6 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Device Name: "Onboard IGD" Model: "Intel 2nd Generation Core Processor Family Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0116 "2nd Generation Core Processor Family Integrated Graphics Controller" SubVendor: pci 0x1297 "Holco Enterprise Co, Ltd/Shuttle Computer" SubDevice: pci 0x2020 Revision: 0x09 Driver: "i915" Driver Modules: "i915" Memory Range: 0xf6400000-0xf67fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xf000-0xf03f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 28 (1253 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00000116sv00001297sd00002020bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: PCI 1c.2: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: hoOk.kT4wtapkgO9 SysFS ID: /devices/pci0000:00/0000:00:1c.2 SysFS BusID: 0000:00:1c.2 Hardware Class: bridge Model: "Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1c14 "6 Series/C200 Series Chipset Family PCI Express Root Port 3" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1c14 Revision: 0xb4 Driver: "pcieport" IRQ: 26 (no events) Module Alias: "pci:v00008086d00001C14sv00008086sd00001C14bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 34: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.hzwMhhJ9Yh0 Parent ID: _Znp.kPZC+u+NCL6 Hardware Class: monitor Model: "PHILIPS Philips FTV" Vendor: PHL "PHILIPS" Device: eisa 0x04c3 "Philips FTV" Resolution: 640x480@60Hz Resolution: 800x600@60Hz Resolution: 1024x768@60Hz Resolution: 1600x1200@60Hz Resolution: 1400x1050@60Hz Resolution: 1920x1080@60Hz Size: 1440x810 mm Year of Manufacture: 2018 Week of Manufacture: 9 Detailed Timings #0: Resolution: 1920x1080 Horizontal: 1920 2448 2492 2640 (+528 +572 +720) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 56.25 kHz, 50.00 Hz Year of Manufacture: 2018 Week of Manufacture: 9 Detailed Timings #1: Resolution: 1920x1080 Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz Driver Info #0: Max. Resolution: 1920x1080 Vert. Sync Range: 48-62 Hz Hor. Sync Range: 15-70 kHz Bandwidth: 148 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (VGA compatible controller) 35: None 01.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: wkFv.xK2RZ5GL31C Parent ID: _Znp.kPZC+u+NCL6 Hardware Class: monitor Model: "AUO LCD Monitor" Vendor: AUO "AUO" Device: eisa 0x23ec Resolution: 1366x768@60Hz Size: 344x193 mm Year of Manufacture: 2009 Week of Manufacture: 1 Detailed Timings #0: Resolution: 1366x768 Horizontal: 1366 1398 1422 1432 (+32 +56 +66) -hsync Vertical: 768 771 775 806 (+3 +7 +38) -vsync Frequencies: 69.30 MHz, 48.39 kHz, 60.04 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (VGA compatible controller) 36: None 00.0: 10600 Disk [Created at block.245] Unique ID: 7tlP.Fxp0d3BezAE SysFS ID: /class/block/ram2 Hardware Class: disk Model: "Disk" Device File: /dev/ram2 Device Number: block 1:2 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 37: None 00.0: 10600 Disk [Created at block.245] Unique ID: CWFH.Fxp0d3BezAE SysFS ID: /class/block/ram0 Hardware Class: disk Model: "Disk" Device File: /dev/ram0 Device Number: block 1:0 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 38: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: WZeP.VPvMSHO0bZA Parent ID: w7Y8.L5X99oc+Q5A SysFS ID: /class/block/sdb SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WDC WD5000BPVT-0" Vendor: "WDC" Device: "WD5000BPVT-0" Revision: "1A01" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sdb Device Files: /dev/sdb, /dev/disk/by-id/ata-WDC_WD5000BPVT-00HXZT3_..., /dev/disk/by-id/wwn-0x... /dev/disk/by-path/pci-0000:00:1f.2-ata-1 Device Number: block 8:16-8:31 BIOS id: 0x81 Geometry (Logical): CHS 60801/255/63 Size: 976773168 sectors a 512 bytes Capacity: 465 GB (500107862016 bytes) Geometry (BIOS EDD): CHS 969021/16/63 Size (BIOS EDD): 976773168 sectors Geometry (BIOS Legacy): CHS 1023/255/63 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 39: None 00.0: 10600 Disk [Created at block.245] Unique ID: XOSI.Fxp0d3BezAE SysFS ID: /class/block/ram9 Hardware Class: disk Model: "Disk" Device File: /dev/ram9 Device Number: block 1:9 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 10600 Disk [Created at block.245] Unique ID: s19p.Fxp0d3BezAE SysFS ID: /class/block/ram14 Hardware Class: disk Model: "Disk" Device File: /dev/ram14 Device Number: block 1:14 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 41: None 00.0: 10600 Disk [Created at block.245] Unique ID: d1y9.Fxp0d3BezAE SysFS ID: /class/block/ram7 Hardware Class: disk Model: "Disk" Device File: /dev/ram7 Device Number: block 1:7 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 42: None 00.0: 10600 Disk [Created at block.245] Unique ID: ygeg.Fxp0d3BezAE SysFS ID: /class/block/ram12 Hardware Class: disk Model: "Disk" Device File: /dev/ram12 Device Number: block 1:12 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 43: None 00.0: 10600 Disk [Created at block.245] Unique ID: UPWc.Fxp0d3BezAE SysFS ID: /class/block/ram5 Hardware Class: disk Model: "Disk" Device File: /dev/ram5 Device Number: block 1:5 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 44: SCSI 100.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.U4wt82XaZa6 Parent ID: w7Y8.L5X99oc+Q5A SysFS ID: /class/block/sr0 SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: cdrom Model: "TSSTcorp CDDVDW TS-L633F" Vendor: "TSSTcorp" Device: "CDDVDW TS-L633F" Revision: "TM00" Driver: "ata_piix", "sr" Driver Modules: "ata_piix", "sr_mod" Device File: /dev/sr0 (/dev/sg2) Device Files: /dev/sr0, /dev/cdrom, /dev/cdrw, /dev/disk/by-id/ata-TSSTcorp_CDDVDW_TS-L633F_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-2, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:2) Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) Drive Speed: 24 45: None 00.0: 10600 Disk [Created at block.245] Unique ID: 2K8Y.Fxp0d3BezAE SysFS ID: /class/block/ram10 Hardware Class: disk Model: "Disk" Device File: /dev/ram10 Device Number: block 1:10 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 46: None 00.0: 10600 Disk [Created at block.245] Unique ID: a20U.Fxp0d3BezAE SysFS ID: /class/block/ram3 Hardware Class: disk Model: "Disk" Device File: /dev/ram3 Device Number: block 1:3 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 47: None 00.0: 10600 Disk [Created at block.245] Unique ID: ghVL.Fxp0d3BezAE SysFS ID: /class/block/ram1 Hardware Class: disk Model: "Disk" Device File: /dev/ram1 Device Number: block 1:1 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 48: None 00.0: 10600 Disk [Created at block.245] Unique ID: JDPt.Fxp0d3BezAE SysFS ID: /class/block/ram15 Hardware Class: disk Model: "Disk" Device File: /dev/ram15 Device Number: block 1:15 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 49: SCSI 400.0: 10600 Disk [Created at block.245] Unique ID: PYMB._ClTJqTSUY4 Parent ID: YmUS.nMBIQ_5OKN9 SysFS ID: /class/block/sda SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb4/4-1/4-1:1.0/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "A HV620S" Vendor: usb 0x125f "ADATA" Device: usb 0xa64a "HV620S" Revision: "0" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sda (/dev/sg0) Device Files: /dev/sda, /dev/disk/by-id/ata-ST1000LM035-1RK172_..., /dev/disk/by-id/wwn-0x... /dev/disk/by-path/pci-0000:04:00.0-usb-0:1:1.0-scsi-0:0:0:0 Device Number: block 8:0-8:15 (char 21:0) BIOS id: 0x80 Geometry (Logical): CHS 121601/255/63 Size: 1953525168 sectors a 512 bytes Capacity: 931 GB (1000204886016 bytes) Geometry (BIOS EDD): CHS 121601/255/63 Size (BIOS EDD): 1953525168 sectors Geometry (BIOS Legacy): CHS 1023/255/63 Module Alias: "usb:v125FpA64Ad0100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 50: None 00.0: 10600 Disk [Created at block.245] Unique ID: 4DCE.Fxp0d3BezAE SysFS ID: /class/block/ram8 Hardware Class: disk Model: "Disk" Device File: /dev/ram8 Device Number: block 1:8 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 51: None 00.0: 10600 Disk [Created at block.245] Unique ID: Psuk.Fxp0d3BezAE SysFS ID: /class/block/ram13 Hardware Class: disk Model: "Disk" Device File: /dev/ram13 Device Number: block 1:13 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 52: None 00.0: 10600 Disk [Created at block.245] Unique ID: xamg.Fxp0d3BezAE SysFS ID: /class/block/ram6 Hardware Class: disk Model: "Disk" Device File: /dev/ram6 Device Number: block 1:6 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 53: None 00.0: 10600 Disk [Created at block.245] Unique ID: VVOc.Fxp0d3BezAE SysFS ID: /class/block/ram11 Hardware Class: disk Model: "Disk" Device File: /dev/ram11 Device Number: block 1:11 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 00.0: 10600 Disk [Created at block.245] Unique ID: 1EGY.Fxp0d3BezAE SysFS ID: /class/block/ram4 Hardware Class: disk Model: "Disk" Device File: /dev/ram4 Device Number: block 1:4 Size: 64000 sectors a 512 bytes Capacity: 0 GB (32768000 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 55: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: FKGF.4Nx_qoDfSd7 Parent ID: pBe4.oLWCeziExdF SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: hub Model: "Intel Integrated Rate Matching Hub" Hotplug: USB Vendor: usb 0x8087 "Intel Corp." Device: usb 0x0024 "Integrated Rate Matching Hub" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #63 (Hub) 56: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.9NRh2dkXGyA Parent ID: YmUS.nMBIQ_5OKN9 SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.06" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0506dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 57: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: lfzD.C_ti+07OwR0 Parent ID: ADDn.4Nx_qoDfSd7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0 SysFS BusID: 1-1.1:1.0 Hardware Class: unknown Model: "Chicony Electronics USB 2.0 Camera" Hotplug: USB Vendor: usb 0x04f2 "Chicony Electronics Co., Ltd" Device: usb 0xb21d "USB 2.0 Camera" Revision: "58.67" Serial ID: -- Driver: "uvcvideo" Driver Modules: "uvcvideo" Device File: /dev/input/event11 Device Files: /dev/input/event11, /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._USB_2.0_Camera_...-event-if00, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event Device Number: char 13:75 Speed: 480 Mbps Module Alias: "usb:v04F2pB21Dd5867dcEFdsc02dp01ic0Eisc01ip00in00" Driver Info #0: Driver Status: uvcvideo is active Driver Activation Cmd: "modprobe uvcvideo" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #62 (Hub) 58: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.2jZuUaWDCA4 Parent ID: YmUS.nMBIQ_5OKN9 SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 3.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0003 "3.0 root hub" Revision: "5.06" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Module Alias: "usb:v1D6Bp0003d0506dc09dsc00dp03ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 59: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.FHd55n4xKo7 Parent ID: pwJ7.VEqXk4Mp7e4 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.06" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0506dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (USB Controller) 62: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: ADDn.4Nx_qoDfSd7 Parent ID: k4bc.FHd55n4xKo7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: hub Model: "Intel Integrated Rate Matching Hub" Hotplug: USB Vendor: usb 0x8087 "Intel Corp." Device: usb 0x0024 "Integrated Rate Matching Hub" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #59 (Hub) 63: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.oLWCeziExdF Parent ID: 1GTX.uKDIN5XtRy1 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.06" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0506dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (USB Controller) 64: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: nLyy.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 65: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.ZHI3OT7LsxA Hardware Class: mouse Model: "SynPS/2 Synaptics TouchPad" Vendor: 0x0002 Device: 0x0007 "SynPS/2 Synaptics TouchPad" Compatible to: int 0x0210 0x0002 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event6, /dev/input/by-path/platform-i8042-serio-2-event-mouse, /dev/input/by-path/platform-i8042-serio-2-mouse Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 2 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 66: None 00.0: 10103 CPU [Created at cpu.457] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,xsave,avx,lahf_lm,epb,pti,ssbd,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,xsaveopt,dtherm,arat,pln,pts,md_clear,flush_l1d Clock: 2107 MHz BogoMips: 4390.08 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 67: None 01.0: 10103 CPU [Created at cpu.457] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,xsave,avx,lahf_lm,epb,pti,ssbd,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,xsaveopt,dtherm,arat,pln,pts,md_clear,flush_l1d Clock: 2046 MHz BogoMips: 4390.08 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 68: None 02.0: 10103 CPU [Created at cpu.457] Unique ID: +rIN.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,xsave,avx,lahf_lm,epb,pti,ssbd,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,xsaveopt,dtherm,arat,pln,pts,md_clear,flush_l1d Clock: 2025 MHz BogoMips: 4390.08 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 69: None 03.0: 10103 CPU [Created at cpu.457] Unique ID: 4zLr.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.42.7 "Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,cpuid,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,xsave,avx,lahf_lm,epb,pti,ssbd,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,xsaveopt,dtherm,arat,pln,pts,md_clear,flush_l1d Clock: 1975 MHz BogoMips: 4390.08 Cache: 3072 kb Units/Processor: 16 Config Status: cfg=new, avail=yes, need=no, active=unknown 70: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: eAgB.ndpeucax6V1 Parent ID: yWPJ.rxMLBAixq6B SysFS ID: /class/net/wlp1s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "rtl8192se" Driver Modules: "rtl8192se" Device File: wlp1s0 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (WLAN controller) 71: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: XO02.ndpeucax6V1 Parent ID: _Uic.WB9g+px4qo2 SysFS ID: /class/net/enp2s0f5 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:02:00.5 Hardware Class: network interface Model: "Ethernet network interface" Driver: "jme" Driver Modules: "jme" Device File: enp2s0f5 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (Ethernet controller) 72: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown


Hardware for Linux and BSD

GitHub