Probe #c7bb7ce026 of Dell 0C27VV A03 Desktop Computer (OptiPlex 780)
Log: hwinfo
05: PCI 00.0: 0600 Host bridge
[Created at pci.386]
Unique ID: qLht.Tt44aL0n82F
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "Intel 4 Series Chipset DRAM Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e10 "4 Series Chipset DRAM Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "agpgart-intel"
Module Alias: "pci:v00008086d00002E10sv00001028sd00000420bc06sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
06: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: vSkL.28of519iUvB
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "Intel 4 Series Chipset PCI Express Root Port"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e11 "4 Series Chipset PCI Express Root Port"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "pcieport"
IRQ: 29 (no events)
Module Alias: "pci:v00008086d00002E11sv00001028sd00000420bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
07: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: _Znp.SFJq_fZRtDB
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel 4 Series Chipset Integrated Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e12 "4 Series Chipset Integrated Graphics Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xf7c00000-0xf7ffffff (rw,non-prefetchable)
Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
I/O Ports: 0xecb0-0xecb7 (rw)
IRQ: 34 (306917 events)
Module Alias: "pci:v00008086d00002E12sv00001028sd00000420bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=new, avail=yes, need=no, active=unknown
08: PCI 02.1: 0380 Display controller
[Created at pci.386]
Unique ID: ruGf.zhgSuVs59r0
SysFS ID: /devices/pci0000:00/0000:00:02.1
SysFS BusID: 0000:00:02.1
Hardware Class: graphics card
Model: "Intel 4 Series Chipset Integrated Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e13 "4 Series Chipset Integrated Graphics Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Memory Range: 0xf7b00000-0xf7bfffff (rw,non-prefetchable)
Module Alias: "pci:v00008086d00002E13sv00001028sd00000420bc03sc80i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
09: PCI 03.0: 0780 Communication controller
[Created at pci.386]
Unique ID: 3hqH.Y2rsQAZoR+1
SysFS ID: /devices/pci0000:00/0000:00:03.0
SysFS BusID: 0000:00:03.0
Hardware Class: unknown
Model: "Intel 4 Series Chipset HECI Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e14 "4 Series Chipset HECI Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "mei_me"
Driver Modules: "mei_me"
Memory Range: 0xfeda6000-0xfeda600f (rw,non-prefetchable)
IRQ: 32 (18 events)
Module Alias: "pci:v00008086d00002E14sv00001028sd00000420bc07sc80i00"
Driver Info #0:
Driver Status: mei_me is active
Driver Activation Cmd: "modprobe mei_me"
Config Status: cfg=new, avail=yes, need=no, active=unknown
10: PCI 03.2: 0101 IDE interface (PCI native mode-only controller, supports bus mastering)
[Created at pci.386]
Unique ID: nKpy.47cG4JmrdQ2
SysFS ID: /devices/pci0000:00/0000:00:03.2
SysFS BusID: 0000:00:03.2
Hardware Class: storage
Model: "Intel 4 Series Chipset PT IDER Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e16 "4 Series Chipset PT IDER Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "ata_generic"
Driver Modules: "ata_generic"
I/O Ports: 0xfe80-0xfe87 (rw)
I/O Ports: 0xfe90-0xfe93 (rw)
I/O Ports: 0xfea0-0xfea7 (rw)
I/O Ports: 0xfeb0-0xfeb3 (rw)
I/O Ports: 0xfef0-0xfeff (rw)
IRQ: 18 (198410 events)
Module Alias: "pci:v00008086d00002E16sv00001028sd00000420bc01sc01i85"
Driver Info #0:
Driver Status: pata_acpi is active
Driver Activation Cmd: "modprobe pata_acpi"
Config Status: cfg=new, avail=yes, need=no, active=unknown
11: PCI 03.3: 0700 Serial controller (16550)
[Created at pci.386]
Unique ID: ffIo.7ezMzUvNmK4
SysFS ID: /devices/pci0000:00/0000:00:03.3
SysFS BusID: 0000:00:03.3
Hardware Class: unknown
Model: "Intel 4 Series Chipset Serial KT Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2e17 "4 Series Chipset Serial KT Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x03
Driver: "serial"
I/O Ports: 0xecb8-0xecbf (rw)
Memory Range: 0xf7ad8000-0xf7ad8fff (rw,non-prefetchable)
IRQ: 17 (no events)
Module Alias: "pci:v00008086d00002E17sv00001028sd00000420bc07sc00i02"
Config Status: cfg=new, avail=yes, need=no, active=unknown
12: PCI 19.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: rBUF.yafRmF4lKC9
SysFS ID: /devices/pci0000:00/0000:00:19.0
SysFS BusID: 0000:00:19.0
Hardware Class: network
Model: "Intel 82567LM-3 Gigabit Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x10de "82567LM-3 Gigabit Network Connection"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0276
Revision: 0x02
Driver: "e1000e"
Driver Modules: "e1000e"
Device File: eth0
Memory Range: 0xf7ae0000-0xf7afffff (rw,non-prefetchable)
Memory Range: 0xf7ad9000-0xf7ad9fff (rw,non-prefetchable)
I/O Ports: 0xece0-0xecff (rw)
IRQ: 36 (138895 events)
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Module Alias: "pci:v00008086d000010DEsv00001028sd00000276bc02sc00i00"
Driver Info #0:
Driver Status: e1000e is active
Driver Activation Cmd: "modprobe e1000e"
Config Status: cfg=new, avail=yes, need=no, active=unknown
13: PCI 1a.0: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: pwJ7.8GxtkpfUxu7
SysFS ID: /devices/pci0000:00/0000:00:1a.0
SysFS BusID: 0000:00:1a.0
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #4"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a67 "82801JD/DO (ICH10 Family) USB UHCI Controller #4"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xff20-0xff3f (rw)
IRQ: 16 (no events)
Module Alias: "pci:v00008086d00003A67sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
14: PCI 1a.1: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: gFpy.fgtdDOnBTH8
SysFS ID: /devices/pci0000:00/0000:00:1a.1
SysFS BusID: 0000:00:1a.1
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #5"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a68 "82801JD/DO (ICH10 Family) USB UHCI Controller #5"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xff00-0xff1f (rw)
IRQ: 17 (no events)
Module Alias: "pci:v00008086d00003A68sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
15: PCI 1a.2: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: XaIo.A5qNiyuu_f8
SysFS ID: /devices/pci0000:00/0000:00:1a.2
SysFS BusID: 0000:00:1a.2
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #6"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a69 "82801JD/DO (ICH10 Family) USB UHCI Controller #6"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfc00-0xfc1f (rw)
IRQ: 22 (no events)
Module Alias: "pci:v00008086d00003A69sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
16: PCI 1a.7: 0c03 USB Controller (EHCI)
[Created at pci.386]
Unique ID: sClz.DLFpQkkm5fE
SysFS ID: /devices/pci0000:00/0000:00:1a.7
SysFS BusID: 0000:00:1a.7
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a6c "82801JD/DO (ICH10 Family) USB2 EHCI Controller #2"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "ehci-pci"
Memory Range: 0xf7ada000-0xf7ada3ff (rw,non-prefetchable)
IRQ: 22 (no events)
Module Alias: "pci:v00008086d00003A6Csv00001028sd00000420bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
17: PCI 1b.0: 0403 Audio device
[Created at pci.386]
Unique ID: u1Nb.dH6p_cKR519
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel 82801JD/DO (ICH10 Family) HD Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a6e "82801JD/DO (ICH10 Family) HD Audio Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf7adc000-0xf7adffff (rw,non-prefetchable)
IRQ: 35 (192 events)
Module Alias: "pci:v00008086d00003A6Esv00001028sd00000420bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
18: PCI 1c.0: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: z8Q3.CIYrkasOkI9
SysFS ID: /devices/pci0000:00/0000:00:1c.0
SysFS BusID: 0000:00:1c.0
Hardware Class: bridge
Model: "Intel 82801JD/DO (ICH10 Family) PCI Express Port 1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a70 "82801JD/DO (ICH10 Family) PCI Express Port 1"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "pcieport"
IRQ: 30 (no events)
Module Alias: "pci:v00008086d00003A70sv00001028sd00000420bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
19: PCI 1c.1: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: qTvu.E7RLij5pn3A
SysFS ID: /devices/pci0000:00/0000:00:1c.1
SysFS BusID: 0000:00:1c.1
Hardware Class: bridge
Model: "Intel 82801JD/DO (ICH10 Family) PCI Express Port 2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a72 "82801JD/DO (ICH10 Family) PCI Express Port 2"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "pcieport"
IRQ: 31 (no events)
Module Alias: "pci:v00008086d00003A72sv00001028sd00000420bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
20: PCI 1d.0: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: 1GTX.b06eI6JNMl6
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a64 "82801JD/DO (ICH10 Family) USB UHCI Controller #1"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xff80-0xff9f (rw)
IRQ: 23 (647805 events)
Module Alias: "pci:v00008086d00003A64sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
21: PCI 1d.1: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: vayM.6R2OngQ4u77
SysFS ID: /devices/pci0000:00/0000:00:1d.1
SysFS BusID: 0000:00:1d.1
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a65 "82801JD/DO (ICH10 Family) USB UHCI Controller #2"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xff60-0xff7f (rw)
IRQ: 17 (no events)
Module Alias: "pci:v00008086d00003A65sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
22: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: mvRC.dr_7GFYnPW7
SysFS ID: /devices/pci0000:00/0000:00:1d.2
SysFS BusID: 0000:00:1d.2
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a66 "82801JD/DO (ICH10 Family) USB UHCI Controller #3"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xff40-0xff5f (rw)
IRQ: 18 (198410 events)
Module Alias: "pci:v00008086d00003A66sv00001028sd00000420bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
23: PCI 1d.7: 0c03 USB Controller (EHCI)
[Created at pci.386]
Unique ID: 5YuN.BWMJTbVM2uD
SysFS ID: /devices/pci0000:00/0000:00:1d.7
SysFS BusID: 0000:00:1d.7
Hardware Class: usb controller
Model: "Intel 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a6a "82801JD/DO (ICH10 Family) USB2 EHCI Controller #1"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "ehci-pci"
Memory Range: 0xff980000-0xff9803ff (rw,non-prefetchable)
IRQ: 23 (647805 events)
Module Alias: "pci:v00008086d00003A6Asv00001028sd00000420bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
24: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
[Created at pci.386]
Unique ID: 6NW+.5DYh1k2l5M6
SysFS ID: /devices/pci0000:00/0000:00:1e.0
SysFS BusID: 0000:00:1e.0
Hardware Class: bridge
Model: "Intel 82801 PCI Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x244e "82801 PCI Bridge"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0xa2
Module Alias: "pci:v00008086d0000244Esv00001028sd00000420bc06sc04i01"
Config Status: cfg=new, avail=yes, need=no, active=unknown
25: PCI 1f.0: 0601 ISA bridge
[Created at pci.386]
Unique ID: BUZT.DYNoFVRi9y4
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel 82801JDO (ICH10DO) LPC Interface Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a14 "82801JDO (ICH10DO) LPC Interface Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "lpc_ich"
Driver Modules: "lpc_ich"
Module Alias: "pci:v00008086d00003A14sv00001028sd00000420bc06sc01i00"
Driver Info #0:
Driver Status: lpc_ich is active
Driver Activation Cmd: "modprobe lpc_ich"
Config Status: cfg=new, avail=yes, need=no, active=unknown
26: PCI 1f.2: 0104 RAID bus controller
[Created at pci.386]
Unique ID: w7Y8.NdTBtqNayp8
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel SATA Controller [RAID mode]"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2822 "SATA Controller [RAID mode]"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Driver: "ahci"
Driver Modules: "ahci"
I/O Ports: 0xfe00-0xfe07 (rw)
I/O Ports: 0xfe10-0xfe13 (rw)
I/O Ports: 0xfe20-0xfe27 (rw)
I/O Ports: 0xfe30-0xfe33 (rw)
I/O Ports: 0xfec0-0xfedf (rw)
Memory Range: 0xff970000-0xff9707ff (rw,non-prefetchable)
IRQ: 33 (195068 events)
Module Alias: "pci:v00008086d00002822sv00001028sd00000420bc01sc04i00"
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: "modprobe ahci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
27: PCI 1f.3: 0c05 SMBus
[Created at pci.386]
Unique ID: nS1_.ZnC3vNrffS3
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: unknown
Model: "Intel 82801JD/DO (ICH10 Family) SMBus Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3a60 "82801JD/DO (ICH10 Family) SMBus Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0420
Revision: 0x02
Memory Range: 0xf7adb000-0xf7adb0ff (rw,non-prefetchable)
I/O Ports: 0x980-0x99f (rw)
IRQ: 9 (6 events)
Module Alias: "pci:v00008086d00003A60sv00001028sd00000420bc0Csc05i00"
Driver Info #0:
Driver Status: i2c_i801 is not active
Driver Activation Cmd: "modprobe i2c_i801"
Config Status: cfg=new, avail=yes, need=no, active=unknown
28: None 00.0: 10000 Monitor
[Created at monitor.125]
Unique ID: rdCR.rTQn9j5Crv9
Parent ID: _Znp.SFJq_fZRtDB
Hardware Class: monitor
Model: "SAMSUNG"
Vendor: SAM "SAMSUNG"
Device: eisa 0x0679 "SAMSUNG"
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@67Hz
Resolution: 640x480@72Hz
Resolution: 640x480@75Hz
Resolution: 800x600@60Hz
Resolution: 800x600@72Hz
Resolution: 800x600@75Hz
Resolution: 832x624@75Hz
Resolution: 1024x768@60Hz
Resolution: 1024x768@70Hz
Resolution: 1024x768@75Hz
Resolution: 1360x768@60Hz
Size: 410x256 mm
Year of Manufacture: 2009
Week of Manufacture: 50
Detailed Timings #0:
Resolution: 1360x768
Horizontal: 1360 1424 1536 1792 (+64 +176 +432) +hsync
Vertical: 768 771 777 795 (+3 +9 +27) +vsync
Frequencies: 85.50 MHz, 47.71 kHz, 60.02 Hz
Year of Manufacture: 2009
Week of Manufacture: 50
Detailed Timings #1:
Resolution: 1024x768
Horizontal: 1024 1048 1184 1344 (+24 +160 +320) -hsync
Vertical: 768 771 777 806 (+3 +9 +38) -vsync
Frequencies: 65.00 MHz, 48.36 kHz, 60.00 Hz
Driver Info #0:
Max. Resolution: 1360x768
Vert. Sync Range: 60-75 Hz
Hor. Sync Range: 30-61 kHz
Bandwidth: 85 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #7 (VGA compatible controller)
29: IDE 200.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.DZhwnvsePL4
Parent ID: w7Y8.NdTBtqNayp8
SysFS ID: /class/block/sda
SysFS BusID: 2:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0
Hardware Class: disk
Model: "FUJITSU MHW2040B"
Vendor: "FUJITSU"
Device: "MHW2040B"
Revision: "0012"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Number: block 8:0-8:15
BIOS id: 0x80
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (RAID bus controller)
30: SCSI 300.0: 10600 Disk
[Created at block.245]
Unique ID: KD9E.e4yMPkcL06F
Parent ID: w7Y8.NdTBtqNayp8
SysFS ID: /class/block/sr0
SysFS BusID: 3:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0
Hardware Class: disk
Model: "Optiarc DVD+-RW AD-7250H"
Vendor: "Optiarc"
Device: "DVD+-RW AD-7250H"
Revision: "100A"
Driver: "ahci", "sr"
Driver Modules: "ahci"
Device File: /dev/sr0 (/dev/sg1)
Device Number: block 11:0 (char 21:1)
BIOS id: 0x81
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (RAID bus controller)
31: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.MxUuepIFPaE
Parent ID: pwJ7.8GxtkpfUxu7
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (USB Controller)
32: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.7gZT0a5zLs5
Parent ID: gFpy.fgtdDOnBTH8
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (USB Controller)
33: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.uOe2OKugI8D
Parent ID: XaIo.A5qNiyuu_f8
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (USB Controller)
34: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 7eqy.v+N+B0xY+P6
Parent ID: 1GTX.b06eI6JNMl6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #20 (USB Controller)
35: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: BSFT.gkSaZmjGyhD
Parent ID: vayM.6R2OngQ4u77
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #21 (USB Controller)
36: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.cO89g+iefn1
Parent ID: sClz.DLFpQkkm5fE
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (USB Controller)
37: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: FZIx.RTX9xWW_uz4
Parent ID: mvRC.dr_7GFYnPW7
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
SysFS BusID: 8-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #22 (USB Controller)
38: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: hhw5.wcOF6I1xUK7
Parent ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0
SysFS BusID: 8-1:1.0
Hardware Class: mouse
Model: "Logitech M105 Optical Mouse"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc077 "M105 Optical Mouse"
Revision: "67.00"
Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Number: char 13:63 (char 13:32)
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC077d6700dc00dsc00dp00ic03isc01ip02in00"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
39: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: 7qYG.KHWtE3oJtV8
Parent ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0
SysFS BusID: 8-2:1.0
Hardware Class: keyboard
Model: "Holtek Keyboard"
Hotplug: USB
Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
Device: usb 0x1503 "Keyboard"
Revision: "3.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event3
Device Number: char 13:67
Speed: 1.5 Mbps
Module Alias: "usb:v04D9p1503d0310dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
40: USB 00.1: 0000 Unclassified device
[Created at usb.122]
Unique ID: a+oK.3Ob1cbbvnY2
Parent ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1
SysFS BusID: 8-2:1.1
Hardware Class: unknown
Model: "Holtek Keyboard"
Hotplug: USB
Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
Device: usb 0x1503 "Keyboard"
Revision: "3.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event4
Device Number: char 13:68
Speed: 1.5 Mbps
Module Alias: "usb:v04D9p1503d0310dc00dsc00dp00ic03isc00ip00in01"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
41: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.9T1GDCLyFd9
Parent ID: 5YuN.BWMJTbVM2uD
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "4.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0404dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (USB Controller)
42: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: FKGF.VMHZDlR5g+9
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0
SysFS BusID: 2-1:1.0
Hardware Class: unknown
Model: "TP-Link TL WN823N RTL8192EU"
Hotplug: USB
Vendor: usb 0x2357 "TP-Link"
Device: usb 0x0109 "TL WN823N RTL8192EU"
Revision: "2.00"
Serial ID: --
Speed: 480 Mbps
Module Alias: "usb:v2357p0109d0200dc00dsc00dp00icFFiscFFipFFin00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #41 (Hub)
43: None 00.0: 10103 CPU
[Created at cpu.462]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.23.10 "Pentium(R) Dual-Core CPU E6700 @ 3.20GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,xsave,lahf_lm,kaiser,tpr_shadow,vnmi,flexpriority,dtherm
Clock: 3191 MHz
BogoMips: 6383.51
Cache: 2048 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
44: None 01.0: 10103 CPU
[Created at cpu.462]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.23.10 "Pentium(R) Dual-Core CPU E6700 @ 3.20GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,xsave,lahf_lm,kaiser,tpr_shadow,vnmi,flexpriority,dtherm
Clock: 3191 MHz
BogoMips: 6383.51
Cache: 2048 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
45: None 00.0: 10701 Ethernet
[Created at net.126]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.yafRmF4lKC9
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:19.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "e1000e"
Driver Modules: "e1000e"
Device File: eth0
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (Ethernet controller)
46: None 00.0: 10700 Loopback
[Created at net.126]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown