10: PCI c00.0: 0282 WLAN controller [Created at pci.386] Unique ID: e9JP.wMU5p8B6686 Parent ID: qTvu.f86JBt6kfy7 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Intel PRO/Wireless 3945ABG [Golan] Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x4222 "PRO/Wireless 3945ABG [Golan] Network Connection" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1020 Revision: 0x02 Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 Features: WLAN Memory Range: 0xecfff000-0xecffffff (rw,non-prefetchable) IRQ: 26 (16954 events) HW Address: F52F66E85727000EC676DC6D8275C780 Permanent HW Address: F52F66E85727000EC676DC6D8275C780 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.745 5.765 5.785 5.805 5.825 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d00004222sv00008086sd00001020bc02sc80i00" Driver Info #0: Driver Status: iwl3945 is active Driver Activation Cmd: "modprobe iwl3945" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (PCI bridge) 11: PCI 1f.2: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.pJArkyPU4c3 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c4 "82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xbfa0-0xbfaf (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d000027C4sv00001028sd000001C2bc01sc01i80" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.dJDpDktJcB7 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d000027D0sv00001028sd000001C2bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 900.0: 0200 Ethernet controller [Created at pci.386] Unique ID: 9Ky7.9a4JKShdn02 Parent ID: hoOk.hz_o80M8jj8 SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Dell Latitude D620" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1600 "NetXtreme BCM5752 Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 "Latitude D620" Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 Memory Range: 0xecef0000-0xecefffff (rw,non-prefetchable) IRQ: 27 (2 events) HW Address: C7629DF1B62FF9FF54F1CBAE9F8F841C Permanent HW Address: C7629DF1B62FF9FF54F1CBAE9F8F841C Link detected: no Module Alias: "pci:v000014E4d00001600sv00001028sd000001C2bc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (PCI bridge) 14: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.dxNr8F9EwJ7 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf20-0xbf3f (rw) IRQ: 23 (no events) Module Alias: "pci:v00008086d000027CBsv00001028sd000001C2bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.D9BSunexN09 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GBM (ICH7-M) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b9 "82801GBM (ICH7-M) LPC Interface Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B9sv00001028sd000001C2bc06sc01i00" Driver Info #0: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.QUbmkqrx3iE SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a1 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x03 Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d000027A1sv00001028sd000001C2bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.b6VLB6wpsY6 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf60-0xbf7f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d000027C9sv00001028sd000001C2bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.vTCCISGI6I3 Parent ID: vSkL.QUbmkqrx3iE SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia Quadro NVS 110M/GeForce Go 7300" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x01d7 "Quadro NVS 110M/GeForce Go 7300" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0xa1 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xed000000-0xedffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xee000000-0xeeffffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 24 (11733 events) Module Alias: "pci:v000010DEd000001D7sv00001028sd000001C2bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 19: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.CSDGHPtdEK9 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xefffc000-0xefffffff (rw,non-prefetchable) IRQ: 25 (230 events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001C2bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.5pyWoeSCl70 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0xe1 Module Alias: "pci:v00008086d00002448sv00001028sd000001C2bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.OaQVtHH8Eu9 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d000027DAsv00001028sd000001C2bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.rDuAD9j0kq1 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a0 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x03 Module Alias: "pci:v00008086d000027A0sv00001028sd000001C2bc06sc00i00" Driver Info #0: Driver Status: intel_agp is active Driver Activation Cmd: "modprobe intel_agp" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.f86JBt6kfy7 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d000027D2sv00001028sd000001C2bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.6XR5gg1XOx6 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf40-0xbf5f (rw) IRQ: 22 (no events) Module Alias: "pci:v00008086d000027CAsv00001028sd000001C2bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 301.0: 0607 CardBus bridge [Created at pci.386] Unique ID: x0Ln.G4lInltMOlC Parent ID: 6NW+.5pyWoeSCl70 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: bridge Model: "O2 Micro OZ601/6912/711E0 CardBus/SmartCardBus Controller" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x6972 "OZ601/6912/711E0 CardBus/SmartCardBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x40 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0x80000000-0x80000fff (rw,non-prefetchable) IRQ: 18 (7 events) Module Alias: "pci:v00001217d00006972sv00001028sd000001C2bc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (PCI bridge) 26: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.4iYbiXo6LA6 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf80-0xbf9f (rw) IRQ: 20 (139 events) Module Alias: "pci:v00008086d000027C8sv00001028sd000001C2bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.eMwmvtlhzXC SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xffa80000-0xffa803ff (rw,non-prefetchable) IRQ: 20 (139 events) Module Alias: "pci:v00008086d000027CCsv00001028sd000001C2bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 1c.2: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: hoOk.hz_o80M8jj8 SysFS ID: /devices/pci0000:00/0000:00:1c.2 SysFS BusID: 0000:00:1c.2 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d4 "NM10/ICH7 Family PCI Express Port 3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01c2 Revision: 0x01 Driver: "pcieport" IRQ: 18 (7 events) Module Alias: "pci:v00008086d000027D4sv00001028sd000001C2bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.P0kQQmmOrj7 Parent ID: VCu0.vTCCISGI6I3 Hardware Class: monitor Model: "PY707 141WD LCD Monitor" Vendor: SEC "PY707 141WD" Device: eisa 0x4457 Serial ID: -- Resolution: 1440x900@60Hz Size: 303x190 mm Year of Manufacture: 2007 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1440x900 Horizontal: 1440 1486 1556 1720 (+46 +116 +280) -hsync Vertical: 900 909 918 935 (+9 +18 +35) -vsync Frequencies: 96.49 MHz, 56.10 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (VGA compatible controller) 31: SCSI 100.0: 10602 CD-ROM (DVD) [Created at block.259] Unique ID: KD9E.GgoOSvGnwU6 Parent ID: w7Y8.pJArkyPU4c3 SysFS ID: /class/block/sr0 SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: cdrom Model: "PHILIPS DVD+-RW SDVD8820" Vendor: "PHILIPS" Device: "DVD+-RW SDVD8820" Revision: "AD15" Driver: "ata_piix", "sr" Driver Modules: "ata_piix", "sr_mod" Device File: /dev/sr0 (/dev/sg1) Device Files: /dev/sr0, /dev/disk/by-diskseq/11, /dev/disk/by-id/ata-PHILIPS_DVD+_-RW_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-2, /dev/dvd, /dev/dvdrw, /dev/cdrw, /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.2-ata-2.0 Device Number: block 11:0 (char 21:1) Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (IDE interface) Drive Speed: 24 32: IDE 00.0: 10600 Disk [Created at block.255] Unique ID: 3OOL.R5FBP02bo1A Parent ID: w7Y8.pJArkyPU4c3 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WDC WD1600BJKT-7" Vendor: "WDC" Device: "WD1600BJKT-7" Revision: "1A11" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/wwn-0x..., /dev/disk/by-diskseq/9, /dev/disk/by-id/ata-WDC_WD1600BJKT-75F4T0_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 Device Number: block 8:0-8:15 Geometry (Logical): CHS 19457/255/63 Size: 312581808 sectors a 512 bytes Capacity: 149 GB (160041885696 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (IDE interface) 33: None 00.0: 10600 Disk [Created at block.255] Unique ID: OKyR.Fxp0d3BezAE SysFS ID: /class/block/zram0 Hardware Class: disk Model: "Disk" Device File: /dev/zram0 Device Files: /dev/zram0, /dev/disk/by-label/zram0, /dev/disk/by-uuid/27ac7fa7-b396-4c93-918d-db83661f3c81, /dev/disk/by-diskseq/12 Device Number: block 253:0 Size: 253312 sectors a 4096 bytes Capacity: 0 GB (1037565952 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.b6VLB6wpsY6 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.12" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0612dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: hSuP.Zr++dp7l7yB Parent ID: pBe4.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: hub Model: "Dell Internal 2.0 Hub" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0xa005 "Internal 2.0 Hub" Revision: "50.18" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v413CpA005d5018dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.6XR5gg1XOx6 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.12" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0612dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.eMwmvtlhzXC SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.12" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0612dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: OWW_.ZrTiaNBpvAA Parent ID: hSuP.Zr++dp7l7yB SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0 SysFS BusID: 2-2.3:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.dxNr8F9EwJ7 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.12" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0612dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 40: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: GGDe.8Ce672uVCLB Parent ID: OWW_.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3.2/2-2.3.2:1.0 SysFS BusID: 2-2.3.2:1.0 Hardware Class: chipcard Model: "O2 Micro Oz776 SmartCard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7762 "Oz776 SmartCard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7762d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #38 (Hub) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.4iYbiXo6LA6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.12" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0612dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (USB Controller) 42: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: nLyy.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 43: None 00.0: 10103 CPU [Created at cpu.509] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,dtherm Clock: 1997 MHz BogoMips: 3994.67 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 44: None 01.0: 10103 CPU [Created at cpu.509] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,dtherm Clock: 1997 MHz BogoMips: 3994.67 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 45: Serial 00.0: 10801 Console [Created at kbd.178] Unique ID: ReDs.5lXXuQkv_C5 Hardware Class: keyboard Model: "serial console" Device: "serial console" Device File: /dev/tty2 Config Status: cfg=new, avail=yes, need=no, active=unknown 46: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: RE7Q.ndpeucax6V1 Parent ID: e9JP.wMU5p8B6686 SysFS ID: /class/net/wlp12s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 HW Address: F52F66E85727000EC676DC6D8275C780 Permanent HW Address: F52F66E85727000EC676DC6D8275C780 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (WLAN controller) 47: None 01.0: 10701 Ethernet [Created at net.126] Unique ID: AEot.ndpeucax6V1 SysFS ID: /class/net/virbr1 Hardware Class: network interface Model: "Ethernet network interface" Driver: "bridge" Device File: virbr1 HW Address: F2B3AD6C86148C5F76CDE70ACE95F55D Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown 48: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: qzC0.ndpeucax6V1 Parent ID: 9Ky7.9a4JKShdn02 SysFS ID: /class/net/enp9s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 HW Address: C7629DF1B62FF9FF54F1CBAE9F8F841C Permanent HW Address: C7629DF1B62FF9FF54F1CBAE9F8F841C Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (Ethernet controller) 49: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown