10: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.eSZ7RLIgLq8 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel NM10/ICH7 Family SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c1 "NM10/ICH7 Family SATA Controller [AHCI mode]" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xfa00-0xfa07 (rw) I/O Ports: 0xf900-0xf903 (rw) I/O Ports: 0xf800-0xf807 (rw) I/O Ports: 0xf700-0xf703 (rw) I/O Ports: 0xf600-0xf60f (rw) Memory Range: 0xfdffe000-0xfdffe3ff (rw,non-prefetchable) IRQ: 24 (no events) Module Alias: "pci:v00008086d000027C1sv0000105Bsd00000CBEbc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.P6Q_LlOhcW9 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xfb00-0xfb1f (rw) IRQ: 16 (7803 events) Module Alias: "pci:v00008086d000027CBsv0000105Bsd00000CBEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.MbjrmDUqKB9 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GH (ICH7DH) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b0 "82801GH (ICH7DH) LPC Interface Bridge" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B0sv0000105Bsd00000CBEbc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #1: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.NHXUOc9HZl8 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xfd00-0xfd1f (rw) IRQ: 19 (7976 events) Module Alias: "pci:v00008086d000027C9sv0000105Bsd00000CBEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb._cFPUv65xWB SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfdff8000-0xfdffbfff (rw,non-prefetchable) IRQ: 25 (1025 events) Module Alias: "pci:v00008086d000027D8sv0000105Bsd00000CBEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.0DEuJolBxo7 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x244e Revision: 0xe1 Module Alias: "pci:v00008086d0000244Esv00008086sd0000244Ebc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.AlSe4oWbw4C SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x500-0x51f (rw) IRQ: 19 (7976 events) Module Alias: "pci:v00008086d000027DAsv0000105Bsd00000CBEbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.eSJoZ0EEQUD SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82946GZ/PL/GL Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2970 "82946GZ/PL/GL Memory Controller Hub" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x02 Module Alias: "pci:v00008086d00002970sv0000105Bsd00000CBEbc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 106.0: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: zsAr.MBaKNxRylj9 Parent ID: 6NW+.0DEuJolBxo7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0 SysFS BusID: 0000:01:06.0 Hardware Class: firewire controller Model: "Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)" Vendor: pci 0x104c "Texas Instruments" Device: pci 0x8024 "TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbf Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xfdeff000-0xfdeff7ff (rw,non-prefetchable) Memory Range: 0xfdef8000-0xfdefbfff (rw,non-prefetchable) IRQ: 16 (7803 events) Module Alias: "pci:v0000104Cd00008024sv0000105Bsd00000CBFbc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 19: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.uhTEtAH_489 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xfc00-0xfc1f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027CAsv0000105Bsd00000CBEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.ssakv12a1N8 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xfe00-0xfe1f (rw) IRQ: 23 (57270 events) Module Alias: "pci:v00008086d000027C8sv0000105Bsd00000CBEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.dqXY_Knu8g9 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 946GZ" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2972 "946GZ" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x02 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfdc00000-0xfdcfffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0xff00-0xff07 (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (7803 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00002972sv0000105Bsd00000CBEbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.QXyv6O+8gkE SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0cbe Revision: 0x01 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfdfff000-0xfdfff3ff (rw,non-prefetchable) IRQ: 23 (57270 events) Module Alias: "pci:v00008086d000027CCsv0000105Bsd00000CBEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.VrFwt8xUorC Parent ID: _Znp.dqXY_Knu8g9 Hardware Class: monitor Model: "SAMSUNG SyncMaster" Vendor: SAM "SAMSUNG" Device: eisa 0x0247 "SyncMaster" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1280x960@60Hz Resolution: 1152x864@75Hz Size: 376x301 mm Year of Manufacture: 2007 Week of Manufacture: 45 Detailed Timings #0: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 30-81 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (VGA compatible controller) 24: SCSI 500.0: 10600 Disk [Created at block.255] Unique ID: MtLc.hp6dwKYcL61 Parent ID: 5YuN.QXyv6O+8gkE SysFS ID: /class/block/sdb SysFS BusID: 5:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host5/target5:0:0/5:0:0:0 Hardware Class: disk Model: "Multi Flash Reader" Vendor: usb 0x058f "Multi" Device: usb 0x6366 "Flash Reader" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdb (/dev/sg1) Device Files: /dev/sdb, /dev/disk/by-diskseq/2, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:6:1.0-scsi-0:0:0:0, /dev/disk/by-path/pci-0000:00:1d.7-usbv2-0:6:1.0-scsi-0:0:0:0, /dev/disk/by-id/usb-Multi_Flash_Reader_...-0:0 Device Number: block 8:16-8:31 (char 21:1) BIOS id: 0x82 Geometry (Logical): CHS 15205/255/63 Size: 244277248 sectors a 512 bytes Capacity: 116 GB (125069950976 bytes) Speed: 480 Mbps Geometry (BIOS EDD): CHS 478974/255/2 Size (BIOS EDD): 244277248 sectors Geometry (BIOS Legacy): CHS 766/255/2 Module Alias: "usb:v058Fp6366d0100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 25: SCSI 600.0: 10600 Disk [Created at block.255] Unique ID: X7GA._KuJ+ijcMj8 Parent ID: 5YuN.QXyv6O+8gkE SysFS ID: /class/block/sdc SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "Kingston DataTraveler 3.0" Vendor: usb 0x0951 "Kingston" Device: usb 0x1666 "DataTraveler 3.0" Revision: "0000" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdc (/dev/sg2) Device Files: /dev/sdc, /dev/disk/by-path/pci-0000:00:1d.7-usbv2-0:7:1.0-scsi-0:0:0:0, /dev/disk/by-diskseq/3, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:7:1.0-scsi-0:0:0:0, /dev/disk/by-id/usb-Kingston_DataTraveler_3.0_...-0:0 Device Number: block 8:32-8:47 (char 21:2) BIOS id: 0x80 Geometry (Logical): CHS 59120/64/32 Size: 121077761 sectors a 512 bytes Capacity: 57 GB (61991813632 bytes) Speed: 480 Mbps Geometry (BIOS EDD): CHS 11940/169/60 Size (BIOS EDD): 121077761 sectors Geometry (BIOS Legacy): CHS 676/169/60 Module Alias: "usb:v0951p1666d0200dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 26: SCSI 400.0: 10600 Disk [Created at block.255] Unique ID: ADDn.qtnGt9ug4Z8 Parent ID: 5YuN.QXyv6O+8gkE SysFS ID: /class/block/sda SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "StoreJet Transcend" Vendor: usb 0x152d "StoreJet" Device: usb 0x2329 "Transcend" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sda (/dev/sg0) Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:1:1.0-scsi-0:0:0:0, /dev/disk/by-id/ata-TOSHIBA_MK2555GSX_..., /dev/disk/by-id/usb-StoreJet_Transcend_...-0:0, /dev/disk/by-path/pci-0000:00:1d.7-usbv2-0:1:1.0-scsi-0:0:0:0, /dev/disk/by-id/wwn-0x..., /dev/disk/by-diskseq/1 Device Number: block 8:0-8:15 (char 21:0) BIOS id: 0x81 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Capacity: 232 GB (250059350016 bytes) Speed: 480 Mbps Geometry (BIOS EDD): CHS 30401/255/63 Size (BIOS EDD): 488397168 sectors Geometry (BIOS Legacy): CHS 705/255/63 Module Alias: "usb:v152Dp2329d0000dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 28: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.NHXUOc9HZl8 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0611dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (USB Controller) 30: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: KRJj.M2GADPgzEb5 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: keyboard Model: "KYE Wireless Keyboard & Mouse" Hotplug: USB Vendor: usb 0x0458 "KYE Systems" Device: usb 0x0063 "Wireless Keyboard & Mouse" Revision: "1.00" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-path/pci-0000:00:1d.1-usbv1-0:1:1.0-event-kbd, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-kbd, /dev/input/by-id/usb-KYE_Systems_Corp._Wireless_Keyboard___...-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v0458p0063d0100dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (Hub) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.uhTEtAH_489 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0611dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.QXyv6O+8gkE SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0611dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 33: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: zFuK.M1BlfozBLm7 Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0 SysFS BusID: 1-8:1.0 Hardware Class: network Model: "Realtek RTL8188EUS 802.11n Wireless Network Adapter" Hotplug: USB Vendor: usb 0x0bda "Realtek Semiconductor Corp." Device: usb 0x8179 "RTL8188EUS 802.11n Wireless Network Adapter" Serial ID: -- Driver: "rtl8xxxu" Driver Modules: "rtl8xxxu" Device File: wlxd037459855f3 Features: WLAN Speed: 480 Mbps HW Address: BADABB35081E531F0CC7D51256DDD3BD Permanent HW Address: BADABB35081E531F0CC7D51256DDD3BD Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v0BDAp8179d0000dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: rtl8xxxu is active Driver Activation Cmd: "modprobe rtl8xxxu" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (Hub) 34: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: mZxt.kDTBz2fv6H3 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: mouse Model: "KYE NetScroll + Traveler / NetScroll 110" Hotplug: USB Vendor: usb 0x0458 "KYE Systems" Device: usb 0x002e "NetScroll + Traveler / NetScroll 110" Revision: "1.10" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event6, /dev/input/by-path/pci-0000:00:1d.1-usbv1-0:2:1.0-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse, /dev/input/by-id/usb-Genius_NetScroll_+_...-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usbv1-0:2:1.0-mouse, /dev/input/by-id/usb-Genius_NetScroll_+_...-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse Device Number: char 13:63 (char 13:33) Speed: 1.5 Mbps Module Alias: "usb:v0458p002Ed0110dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (Hub) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.P6Q_LlOhcW9 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0611dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 37: USB 00.1: 10503 USB Mouse [Created at usb.122] Unique ID: ncZn.3BVuQ8cj1l4 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1 SysFS BusID: 3-1:1.1 Hardware Class: mouse Model: "KYE Wireless Keyboard & Mouse" Hotplug: USB Vendor: usb 0x0458 "KYE Systems" Device: usb 0x0063 "Wireless Keyboard & Mouse" Revision: "1.00" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3, /dev/input/by-id/usb-KYE_Systems_Corp._Wireless_Keyboard___...-if01-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usbv1-0:1:1.1-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-event-mouse, /dev/input/by-id/usb-KYE_Systems_Corp._Wireless_Keyboard___...-if01-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-mouse, /dev/input/by-path/pci-0000:00:1d.1-usbv1-0:1:1.1-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v0458p0063d0100dc00dsc00dp00ic03isc01ip02in01" Driver Info #0: Buttons: 3 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (Hub) 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.ssakv12a1N8 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0611dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 39: None 00.0: 10103 CPU [Created at cpu.465] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E4700 @ 2.60GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 2593 MHz BogoMips: 5186.65 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 01.0: 10103 CPU [Created at cpu.465] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E4700 @ 2.60GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 2593 MHz BogoMips: 5186.65 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 41: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Sgur.ndpeucax6V1 Parent ID: zFuK.M1BlfozBLm7 SysFS ID: /class/net/wlxd037459855f3 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "rtl8xxxu" Driver Modules: "rtl8xxxu" Device File: wlxd037459855f3 HW Address: BADABB35081E531F0CC7D51256DDD3BD Permanent HW Address: BADABB35081E531F0CC7D51256DDD3BD Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (WLAN controller) 42: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown