05: PCI c00.0: 0280 Network controller [Created at pci.386] Unique ID: zb5c.AUabv0M9SM3 Parent ID: qTvu.pJ_cBAxbR1C SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Dell Wireless 1390 WLAN Mini-Card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4311 "BCM4311 802.11b/g WLAN" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0007 "Wireless 1390 WLAN Mini-Card" Revision: 0x01 Memory Range: 0xecffc000-0xecffffff (rw,non-prefetchable) IRQ: 17 (no events) Module Alias: "pci:v000014E4d00004311sv00001028sd00000007bc02sc80i00" Driver Info #0: Driver Status: ssb is not active Driver Activation Cmd: "modprobe ssb" Driver Info #1: Driver Status: wl is active Driver Activation Cmd: "modprobe wl" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (PCI bridge) 06: PCI 1f.2: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.zU29lFEMsg7 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c4 "82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xbfa0-0xbfaf (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d000027C4sv00001028sd000001CCbc01sc01i80" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.nU57E1iBOGB SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d000027D0sv00001028sd000001CCbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 900.0: 0200 Ethernet controller [Created at pci.386] Unique ID: 9Ky7.JlycKlVVZ56 Parent ID: hoOk.r8t69JA0VoC SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Broadcom NetXtreme BCM5752 Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1600 "NetXtreme BCM5752 Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 Memory Range: 0xecef0000-0xecefffff (rw,non-prefetchable) IRQ: 26 (37903 events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v000014E4d00001600sv00001028sd000001CCbc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (PCI bridge) 09: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.n6G99Yz5iOB SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf20-0xbf3f (rw) IRQ: 23 (no events) Module Alias: "pci:v00008086d000027CBsv00001028sd000001CCbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.NK3mu4Tp95D SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GBM (ICH7-M) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b9 "82801GBM (ICH7-M) LPC Interface Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B9sv00001028sd000001CCbc06sc01i00" Driver Info #0: Driver Status: intel_rng is not active Driver Activation Cmd: "modprobe intel_rng" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #2: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.afT4l7gprm2 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a1 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x03 Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d000027A1sv00001028sd000001CCbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.lHNfBPkhedA SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf60-0xbf7f (rw) IRQ: 21 (67 events) Module Alias: "pci:v00008086d000027C9sv00001028sd000001CCbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.a31GnJCtPl7 Parent ID: vSkL.afT4l7gprm2 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GeForce Go 7400" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x01d8 "GeForce Go 7400" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0xa1 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xed000000-0xedffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xee000000-0xeeffffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 25 (229351 events) Module Alias: "pci:v000010DEd000001D8sv00001028sd000001CCbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge) 14: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.Md5aHihV0PD SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xefffc000-0xefffffff (rw,non-prefetchable) IRQ: 24 (272 events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001CCbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1c.3: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: Z7uZ.tzlc6SPQYZD SysFS ID: /devices/pci0000:00/0000:00:1c.3 SysFS BusID: 0000:00:1c.3 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d6 "NM10/ICH7 Family PCI Express Port 4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "pcieport" IRQ: 19 (9 events) Module Alias: "pci:v00008086d000027D6sv00001028sd000001CCbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.F_qqoxG4XC4 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0xe1 Module Alias: "pci:v00008086d00002448sv00001028sd000001CCbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.YlIpta500zD SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 I/O Ports: 0x10c0-0x10df (rw) IRQ: 3 (no events) Module Alias: "pci:v00008086d000027DAsv00001028sd000001CCbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is not active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.+OmUDSXuVv5 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a0 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x03 Module Alias: "pci:v00008086d000027A0sv00001028sd000001CCbc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.pJ_cBAxbR1C SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d000027D2sv00001028sd000001CCbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 301.4: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: PKI7.VUjWo12cpq4 Parent ID: 6NW+.F_qqoxG4XC4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.4 SysFS BusID: 0000:03:01.4 Hardware Class: firewire controller Model: "O2 Micro Firewire (IEEE 1394)" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x00f7 "Firewire (IEEE 1394)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x02 Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xecbff000-0xecbfffff (rw,non-prefetchable) Memory Range: 0xecbfe800-0xecbfefff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d000000F7sv00001028sd000001CCbc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 21: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.GiJPgzrOA0B SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf40-0xbf5f (rw) IRQ: 22 (no events) Module Alias: "pci:v00008086d000027CAsv00001028sd000001CCbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 301.0: 0607 CardBus bridge [Created at pci.386] Unique ID: x0Ln.6doNW9rgYhC Parent ID: 6NW+.F_qqoxG4XC4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: bridge Model: "O2 Micro Cardbus bridge" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x7135 "Cardbus bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x21 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0xe4000000-0xe4000fff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d00007135sv00001028sd000001CCbc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 23: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.EtQviqc_6FA SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf80-0xbf9f (rw) IRQ: 20 (41 events) Module Alias: "pci:v00008086d000027C8sv00001028sd000001CCbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.oXo4wAaZlc0 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "ehci-pci" Memory Range: 0xffa80000-0xffa803ff (rw,non-prefetchable) IRQ: 20 (41 events) Module Alias: "pci:v00008086d000027CCsv00001028sd000001CCbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1c.2: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: hoOk.r8t69JA0VoC SysFS ID: /devices/pci0000:00/0000:00:1c.2 SysFS BusID: 0000:00:1c.2 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d4 "NM10/ICH7 Family PCI Express Port 3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cc Revision: 0x01 Driver: "pcieport" IRQ: 18 (no events) Module Alias: "pci:v00008086d000027D4sv00001028sd000001CCbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.yvpi3oWUeg3 Parent ID: VCu0.a31GnJCtPl7 Hardware Class: monitor Model: "CD515 M1LW2A LCD Monitor" Vendor: SHP "CD515 M1LW2A" Device: eisa 0x13bd Resolution: 1920x1200@60Hz Size: 331x207 mm Year of Manufacture: 2007 Week of Manufacture: 10 Detailed Timings #0: Resolution: 1920x1200 Horizontal: 1920 2020 2052 2184 (+100 +132 +264) -hsync Vertical: 1200 1202 1208 1235 (+2 +8 +35) -vsync Frequencies: 161.75 MHz, 74.06 kHz, 59.97 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (VGA compatible controller) 27: SCSI 100.0: 10600 Disk [Created at block.245] Unique ID: KD9E.PxUARV1rCC4 Parent ID: w7Y8.zU29lFEMsg7 SysFS ID: /class/block/sr0 SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: disk Model: "Optiarc DVD+-RW AD-5540A" Vendor: "Optiarc" Device: "DVD+-RW AD-5540A" Revision: "102C" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg1) Device Number: block 11:0 (char 21:1) BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (IDE interface) 28: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.3ihZooDAJl1 Parent ID: w7Y8.zU29lFEMsg7 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "FUJITSU MHZ2160B" Vendor: "FUJITSU" Device: "MHZ2160B" Revision: "001C" Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x81 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (IDE interface) 29: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.lHNfBPkhedA SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (USB Controller) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: hSuP.Zr++dp7l7yB Parent ID: pBe4.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: hub Model: "Dell Internal 2.0 Hub" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0xa005 "Internal 2.0 Hub" Revision: "50.18" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v413CpA005d5018dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #36 (Hub) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: KRJj.ZrTiaNBpvAA Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.GiJPgzrOA0B SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.oXo4wAaZlc0 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.n6G99Yz5iOB SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (USB Controller) 35: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: Yl4J.8Ce672uVCLB Parent ID: KRJj.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2/3-1.2:1.0 SysFS BusID: 3-1.2:1.0 Hardware Class: chipcard Model: "O2 Micro Oz776 SmartCard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7762 "Oz776 SmartCard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7762d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.EtQviqc_6FA SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 37: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,dtherm Clock: 2171 MHz BogoMips: 4654.92 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 38: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,dtherm Clock: 1958 MHz BogoMips: 4654.92 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 39: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: qzC0.ndpeucax6V1 Parent ID: 9Ky7.JlycKlVVZ56 SysFS ID: /class/net/enp9s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (Ethernet controller)