Probe #dc84cc6c95 of Dell 0CU409 Desktop Computer (Vostro 200)
Log: hwinfo
05: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering)
[Created at pci.386]
Unique ID: w7Y8.mn_t_8FoQLC
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2920 "82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0xf800-0xf807 (rw)
I/O Ports: 0xf700-0xf703 (rw)
I/O Ports: 0xf600-0xf607 (rw)
I/O Ports: 0xf500-0xf503 (rw)
I/O Ports: 0xf400-0xf40f (rw)
I/O Ports: 0xf300-0xf30f (rw)
IRQ: 19 (766556 events)
Module Alias: "pci:v00008086d00002920sv00001028sd00000238bc01sc01i8F"
Driver Info #0:
Driver Status: pata_acpi is active
Driver Activation Cmd: "modprobe pata_acpi"
Config Status: cfg=new, avail=yes, need=no, active=unknown
06: PCI 1a.1: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: gFpy.6ep5hz7l3OA
SysFS ID: /devices/pci0000:00/0000:00:1a.1
SysFS BusID: 0000:00:1a.1
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #5"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfd00-0xfd1f (rw)
IRQ: 21 (913 events)
Module Alias: "pci:v00008086d00002938sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
07: PCI 1f.0: 0601 ISA bridge
[Created at pci.386]
Unique ID: BUZT.SDWjkW2k5o8
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel 82801IR (ICH9R) LPC Interface Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2916 "82801IR (ICH9R) LPC Interface Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "lpc_ich"
Driver Modules: "lpc_ich"
Module Alias: "pci:v00008086d00002916sv00001028sd00000238bc06sc01i00"
Driver Info #0:
Driver Status: lpc_ich is active
Driver Activation Cmd: "modprobe lpc_ich"
Config Status: cfg=new, avail=yes, need=no, active=unknown
08: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: vSkL.AiFyASrnH97
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "Intel 82G33/G31/P35/P31 Express PCI Express Root Port"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x29c1 "82G33/G31/P35/P31 Express PCI Express Root Port"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "pcieport"
IRQ: 24 (no events)
Module Alias: "pci:v00008086d000029C1sv00001028sd00000238bc06sc04i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
09: PCI 1d.1: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: vayM.ZO_rEKRPUfA
SysFS ID: /devices/pci0000:00/0000:00:1d.1
SysFS BusID: 0000:00:1d.1
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfa00-0xfa1f (rw)
IRQ: 19 (766556 events)
Module Alias: "pci:v00008086d00002935sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
10: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: VCu0.1dFQ0OPZpl3
Parent ID: vSkL.AiFyASrnH97
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "Dell Radeon HD 6350"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x68f9 "Cedar [Radeon HD 5000/6000/7350/8350 Series]"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x2126 "Radeon HD 6350"
Driver: "radeon"
Driver Modules: "radeon"
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xfdde0000-0xfddfffff (rw,non-prefetchable)
I/O Ports: 0xce00-0xceff (rw)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 26 (827886 events)
Module Alias: "pci:v00001002d000068F9sv00001028sd00002126bc03sc00i00"
Driver Info #0:
Driver Status: radeon is active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)
11: PCI 1b.0: 0403 Audio device
[Created at pci.386]
Unique ID: u1Nb.4F2HSCh_h7B
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel 82801I (ICH9 Family) HD Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfdff4000-0xfdff7fff (rw,non-prefetchable)
IRQ: 27 (1575 events)
Module Alias: "pci:v00008086d0000293Esv00001028sd00000238bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
12: PCI 1f.5: 0101 IDE interface (PCI native mode-only controller, supports bus mastering)
[Created at pci.386]
Unique ID: W60f.iO1iHrp09T7
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: storage
Model: "Intel 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2926 "82801I (ICH9 Family) 2 port SATA Controller [IDE mode]"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0xf100-0xf107 (rw)
I/O Ports: 0xf000-0xf003 (rw)
I/O Ports: 0xef00-0xef07 (rw)
I/O Ports: 0xee00-0xee03 (rw)
I/O Ports: 0xed00-0xed0f (rw)
I/O Ports: 0xec00-0xec0f (rw)
IRQ: 19 (766556 events)
Module Alias: "pci:v00008086d00002926sv00001028sd00000238bc01sc01i85"
Driver Info #0:
Driver Status: pata_acpi is active
Driver Activation Cmd: "modprobe pata_acpi"
Config Status: cfg=new, avail=yes, need=no, active=unknown
13: PCI 19.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: ID95.WtuE7rn6qM3
SysFS ID: /devices/pci0000:00/0000:00:19.0
SysFS BusID: 0000:00:19.0
Hardware Class: network
Model: "Intel 82562V-2 10/100 Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x10c0 "82562V-2 10/100 Network Connection"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "e1000e"
Driver Modules: "e1000e"
Device File: enp0s25
Memory Range: 0xfdfc0000-0xfdfdffff (rw,non-prefetchable)
Memory Range: 0xfdfff000-0xfdffffff (rw,non-prefetchable)
I/O Ports: 0xff00-0xff1f (rw)
IRQ: 25 (19209 events)
HW Address: ...
Permanent HW Address: ...
Link detected: no
Module Alias: "pci:v00008086d000010C0sv00001028sd00000238bc02sc00i00"
Driver Info #0:
Driver Status: e1000e is active
Driver Activation Cmd: "modprobe e1000e"
Config Status: cfg=new, avail=yes, need=no, active=unknown
14: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
[Created at pci.386]
Unique ID: 6NW+.xTz9EqncMH4
SysFS ID: /devices/pci0000:00/0000:00:1e.0
SysFS BusID: 0000:00:1e.0
Hardware Class: bridge
Model: "Intel 82801 PCI Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x244e "82801 PCI Bridge"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x92
Module Alias: "pci:v00008086d0000244Esv00001028sd00000238bc06sc04i01"
Config Status: cfg=new, avail=yes, need=no, active=unknown
15: PCI 1f.3: 0c05 SMBus
[Created at pci.386]
Unique ID: nS1_.0l8XM1s_F_6
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: unknown
Model: "Intel 82801I (ICH9 Family) SMBus Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2930 "82801I (ICH9 Family) SMBus Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "i801_smbus"
Driver Modules: "i2c_i801"
Memory Range: 0xfdffc000-0xfdffc0ff (rw,non-prefetchable)
I/O Ports: 0x500-0x51f (rw)
IRQ: 18 (1660732 events)
Module Alias: "pci:v00008086d00002930sv00001028sd00000238bc0Csc05i00"
Driver Info #0:
Driver Status: i2c_i801 is active
Driver Activation Cmd: "modprobe i2c_i801"
Config Status: cfg=new, avail=yes, need=no, active=unknown
16: PCI 00.0: 0600 Host bridge
[Created at pci.386]
Unique ID: qLht.bRYMfmisxHA
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "Intel 82G33/G31/P35/P31 Express DRAM Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x29c0 "82G33/G31/P35/P31 Express DRAM Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Module Alias: "pci:v00008086d000029C0sv00001028sd00000238bc06sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
17: PCI 1a.2: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: XaIo.d2mr9YFSbmA
SysFS ID: /devices/pci0000:00/0000:00:1a.2
SysFS BusID: 0000:00:1a.2
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #6"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2939 "82801I (ICH9 Family) USB UHCI Controller #6"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfc00-0xfc1f (rw)
IRQ: 19 (766556 events)
Module Alias: "pci:v00008086d00002939sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
18: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: mvRC.4pwbjuY602B
SysFS ID: /devices/pci0000:00/0000:00:1d.2
SysFS BusID: 0000:00:1d.2
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xf900-0xf91f (rw)
IRQ: 18 (1660732 events)
Module Alias: "pci:v00008086d00002936sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
19: PCI 1a.0: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: pwJ7.bDtLCP02Y+9
SysFS ID: /devices/pci0000:00/0000:00:1a.0
SysFS BusID: 0000:00:1a.0
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #4"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfe00-0xfe1f (rw)
IRQ: 16 (no events)
Module Alias: "pci:v00008086d00002937sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
20: PCI 1d.0: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: 1GTX.2_16mlJiyGA
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xfb00-0xfb1f (rw)
IRQ: 23 (no events)
Module Alias: "pci:v00008086d00002934sv00001028sd00000238bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
21: PCI 1a.7: 0c03 USB Controller (EHCI)
[Created at pci.386]
Unique ID: sClz.gIBHuJ5Kil0
SysFS ID: /devices/pci0000:00/0000:00:1a.7
SysFS BusID: 0000:00:1a.7
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "ehci-pci"
Memory Range: 0xfdffe000-0xfdffe3ff (rw,non-prefetchable)
IRQ: 18 (1660732 events)
Module Alias: "pci:v00008086d0000293Csv00001028sd00000238bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
22: PCI 1d.7: 0c03 USB Controller (EHCI)
[Created at pci.386]
Unique ID: 5YuN.eTInwAsve_F
SysFS ID: /devices/pci0000:00/0000:00:1d.7
SysFS BusID: 0000:00:1d.7
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0238
Revision: 0x02
Driver: "ehci-pci"
Memory Range: 0xfdffd000-0xfdffd3ff (rw,non-prefetchable)
IRQ: 23 (no events)
Module Alias: "pci:v00008086d0000293Asv00001028sd00000238bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
23: None 00.0: 10000 Monitor
[Created at monitor.125]
Unique ID: rdCR.E9E3glvPXy5
Parent ID: VCu0.1dFQ0OPZpl3
Hardware Class: monitor
Model: "PHILIPS PHL 273V5"
Vendor: PHL "PHILIPS"
Device: eisa 0xc0d2 "PHL 273V5"
Serial ID: --
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@67Hz
Resolution: 800x600@60Hz
Resolution: 1024x768@60Hz
Resolution: 1920x1080@60Hz
Resolution: 1280x720@60Hz
Size: 598x336 mm
Year of Manufacture: 2013
Week of Manufacture: 43
Detailed Timings #0:
Resolution: 1920x1080
Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync
Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync
Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz
Driver Info #0:
Max. Resolution: 1920x1080
Vert. Sync Range: 56-71 Hz
Hor. Sync Range: 30-83 kHz
Bandwidth: 148 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (VGA compatible controller)
24: None 01.0: 10000 Monitor
[Created at monitor.125]
Unique ID: wkFv.htrEM2YhUgA
Parent ID: VCu0.1dFQ0OPZpl3
Hardware Class: monitor
Model: "DELL E171FP"
Vendor: DEL "DELL"
Device: eisa 0x300f "DELL E171FP"
Serial ID: --
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@75Hz
Resolution: 800x600@60Hz
Resolution: 800x600@75Hz
Resolution: 1024x768@60Hz
Resolution: 1024x768@75Hz
Resolution: 1280x1024@75Hz
Resolution: 1280x1024@60Hz
Resolution: 1152x864@75Hz
Size: 338x270 mm
Year of Manufacture: 2003
Week of Manufacture: 12
Detailed Timings #0:
Resolution: 1280x1024
Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync
Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync
Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz
Driver Info #0:
Max. Resolution: 1280x1024
Vert. Sync Range: 56-76 Hz
Hor. Sync Range: 30-80 kHz
Bandwidth: 108 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (VGA compatible controller)
25: IDE 300.0: 10600 Disk
[Created at block.245]
Unique ID: WZeP.o14uXdWEeL3
Parent ID: W60f.iO1iHrp09T7
SysFS ID: /class/block/sdb
SysFS BusID: 3:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.5/ata4/host3/target3:0:0/3:0:0:0
Hardware Class: disk
Model: "WDC WD2500AAJS-7"
Vendor: "WDC"
Device: "WD2500AAJS-7"
Revision: "1B02"
Driver: "ata_piix", "sd"
Driver Modules: "ata_piix"
Device File: /dev/sdb
Device Number: block 8:16-8:31
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (IDE interface)
26: None 00.0: 10600 Disk
[Created at block.245]
Unique ID: kwWm.Fxp0d3BezAE
SysFS ID: /class/block/fd0
SysFS BusID: floppy.0
SysFS Device Link: /devices/platform/floppy.0
Hardware Class: disk
Model: "Disk"
Driver: "floppy"
Driver Modules: "floppy"
Device File: /dev/fd0
Device Number: block 2:0
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
27: IDE 00.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.kFo8_xmML7E
Parent ID: w7Y8.mn_t_8FoQLC
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "M4-CT256M4SSD2"
Device: "M4-CT256M4SSD2"
Revision: "0309"
Driver: "ata_piix", "sd"
Driver Modules: "ata_piix"
Device File: /dev/sda
Device Number: block 8:0-8:15
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #5 (IDE interface)
28: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: rg_L.bU85haCfOz9
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0
SysFS BusID: 4-2:1.0
Hardware Class: keyboard
Model: "China Resource Semico USB Keyboard"
Hotplug: USB
Vendor: usb 0x1a2c "China Resource Semico Co., Ltd"
Device: usb 0x2d23 "USB Keyboard"
Revision: "1.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event2
Device Number: char 13:66
Speed: 1.5 Mbps
Module Alias: "usb:v1A2Cp2D23d0110dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
29: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: UfPf.iX2GX+nOdS0
Parent ID: 2XnU.uOe2OKugI8D
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0
SysFS BusID: 5-1:1.0
Hardware Class: mouse
Model: "Holtek Optical Mouse"
Hotplug: USB
Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
Device: usb 0x0499 "Optical Mouse"
Revision: "2.90"
Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Number: char 13:63 (char 13:32)
Speed: 1.5 Mbps
Module Alias: "usb:v04D9p0499d0290dc00dsc00dp00ic03isc01ip02in00"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #42 (Hub)
30: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 7eqy.v+N+B0xY+P6
Parent ID: 1GTX.2_16mlJiyGA
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #20 (USB Controller)
31: USB 00.2: 0000 Unclassified device
[Created at usb.122]
Unique ID: q8Yy.oIqAWJnjuRD
Parent ID: 2XnU.uOe2OKugI8D
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.2
SysFS BusID: 5-2:1.2
Hardware Class: unknown
Model: "Nintendo Wii Remote Controller RVL-003"
Hotplug: USB
Vendor: usb 0x057e "Nintendo Co., Ltd"
Device: usb 0x0306 "Wii Remote Controller RVL-003"
Revision: "1.00"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v057Ep0306d0100dc00dsc00dp00ic03isc00ip00in02"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #42 (Hub)
32: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.MxUuepIFPaE
Parent ID: pwJ7.bDtLCP02Y+9
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #19 (USB Controller)
34: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: BSFT.gkSaZmjGyhD
Parent ID: vayM.ZO_rEKRPUfA
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (USB Controller)
35: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: 2UT6.jrYmOdSjfr1
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0
Hardware Class: network
Model: "Realtek RTL8192CU 802.11n WLAN Adapter"
Hotplug: USB
Vendor: usb 0x0bda "Realtek Semiconductor Corp."
Device: usb 0x8178 "RTL8192CU 802.11n WLAN Adapter"
Revision: "2.00"
Serial ID: --
Driver: "rtl8192cu"
Driver Modules: "rtl8192cu"
Device File: wlxc04a0012bbef
Features: WLAN
Speed: 480 Mbps
HW Address: ...
Permanent HW Address: ...
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v0BDAp8178d0200dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rtl8192cu is active
Driver Activation Cmd: "modprobe rtl8192cu"
Driver Info #1:
Driver Status: rtl8xxxu is active
Driver Activation Cmd: "modprobe rtl8xxxu"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #40 (Hub)
36: USB 00.1: 0000 Unclassified device
[Created at usb.122]
Unique ID: IsEQ.KbDF270FJ04
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1
SysFS BusID: 4-2:1.1
Hardware Class: unknown
Model: "China Resource Semico USB Keyboard"
Hotplug: USB
Vendor: usb 0x1a2c "China Resource Semico Co., Ltd"
Device: usb 0x2d23 "USB Keyboard"
Revision: "1.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event3
Device Number: char 13:67
Speed: 1.5 Mbps
Module Alias: "usb:v1A2Cp2D23d0110dc00dsc00dp00ic03isc00ip00in01"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
37: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.7gZT0a5zLs5
Parent ID: gFpy.6ep5hz7l3OA
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (USB Controller)
38: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: FZIx.RTX9xWW_uz4
Parent ID: mvRC.4pwbjuY602B
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
SysFS BusID: 8-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (USB Controller)
40: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.cO89g+iefn1
Parent ID: sClz.gIBHuJ5Kil0
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #21 (USB Controller)
42: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.uOe2OKugI8D
Parent ID: XaIo.d2mr9YFSbmA
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (USB Controller)
43: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.9T1GDCLyFd9
Parent ID: 5YuN.eTInwAsve_F
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "5.04"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0504dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #22 (USB Controller)
44: None 00.0: 10103 CPU
[Created at cpu.462]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,monitor,tm2,ssse3,lahf_lm,pti,dtherm
Clock: 2980 MHz
BogoMips: 5984.96
Cache: 6144 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
45: None 01.0: 10103 CPU
[Created at cpu.462]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,monitor,tm2,ssse3,lahf_lm,pti,dtherm
Clock: 2985 MHz
BogoMips: 5984.96
Cache: 6144 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
46: None 00.0: 10701 Ethernet
[Created at net.126]
Unique ID: 4Iz5.ndpeucax6V1
Parent ID: ID95.WtuE7rn6qM3
SysFS ID: /class/net/enp0s25
SysFS Device Link: /devices/pci0000:00/0000:00:19.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "e1000e"
Driver Modules: "e1000e"
Device File: enp0s25
HW Address: ...
Permanent HW Address: ...
Link detected: no
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (Ethernet controller)
47: None 00.0: 10700 Loopback
[Created at net.126]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
48: None 00.0: 10701 Ethernet
[Created at net.126]
Unique ID: Mcqb.ndpeucax6V1
Parent ID: 2UT6.jrYmOdSjfr1
SysFS ID: /class/net/wlxc04a0012bbef
SysFS Device Link: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "rtl8192cu"
Driver Modules: "rtl8192cu"
Device File: wlxc04a0012bbef
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #35 (WLAN controller)