05: PCI 300.0: 0200 Ethernet controller [Created at pci.386] Unique ID: UOJ9.RxL2MbagOmD Parent ID: QSNP.WavskvsUbd5 SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Dell OptiPlex 745" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x167a "NetXtreme BCM5754 Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp3s0 Memory Range: 0xfe6f0000-0xfe6fffff (rw,non-prefetchable) IRQ: 25 (2 events) HW Address: ... Permanent HW Address: ... Link detected: no Module Alias: "pci:v000014E4d0000167Asv00001028sd000001DAbc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (PCI bridge) 06: PCI 1f.2: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.xG+LtX+OHI0 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2820 "82801H (ICH8 Family) 4 port SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xfec0-0xfecf (rw) I/O Ports: 0xecc0-0xeccf (rw) IRQ: 20 (no events) Module Alias: "pci:v00008086d00002820sv00001028sd000001DAbc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.OGMtuLwrNZ2 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283f "82801H (ICH8 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "pcieport" IRQ: 16 (372635 events) Module Alias: "pci:v00008086d0000283Fsv00001028sd000001DAbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.ppo9Q4G03C2 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2835 "82801H (ICH8 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff00-0xff1f (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d00002835sv00001028sd000001DAbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.fo8pWh6sEM3 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801HB/HR (ICH8/R) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2810 "82801HB/HR (ICH8/R) LPC Interface Controller" Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002810sv00000000sd00000000bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.JdIZgDLdGg5 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel 82Q963/Q965 PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2991 "82Q963/Q965 PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da Revision: 0x02 Driver: "pcieport" IRQ: 16 (372635 events) Module Alias: "pci:v00008086d00002991sv00001028sd000001DAbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.l91AVonByf0 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2831 "82801H (ICH8 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff60-0xff7f (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d00002831sv00001028sd000001DAbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.EBBMTi21xbA SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel 82Q963/Q965 Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2993 "82Q963/Q965 Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da Revision: 0x02 Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002993sv00001028sd000001DAbc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.138KtM2m6f7 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9fc000-0xfe9fffff (rw,non-prefetchable) IRQ: 24 (339 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001DAbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.5: 0101 IDE interface (PCI native mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: W60f.RPvF_0XwBdE SysFS ID: /devices/pci0000:00/0000:00:1f.5 SysFS BusID: 0000:00:1f.5 Hardware Class: storage Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2825 "82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xfe40-0xfe47 (rw) I/O Ports: 0xfe50-0xfe53 (rw) I/O Ports: 0xfe60-0xfe67 (rw) I/O Ports: 0xfe70-0xfe73 (rw) I/O Ports: 0xfed0-0xfedf (rw) I/O Ports: 0xecd0-0xecdf (rw) IRQ: 20 (no events) Module Alias: "pci:v00008086d00002825sv00001028sd000001DAbc01sc01i85" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.K33oPTgQ6x9 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da Revision: 0xf2 Module Alias: "pci:v00008086d0000244Esv00001028sd000001DAbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.UzAKGighCT2 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283e "82801H (ICH8 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Memory Range: 0xfe9fbb00-0xfe9fbbff (rw,non-prefetchable) I/O Ports: 0xece0-0xecff (rw) IRQ: 9 (3 events) Module Alias: "pci:v00008086d0000283Esv00001028sd000001DAbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is not active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.kMbz8YCiwo8 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2990 "82Q963/Q965 Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Module Alias: "pci:v00008086d00002990sv00001028sd000001DAbc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.GazvzMvuT21 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2832 "82801H (ICH8 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff40-0xff5f (rw) IRQ: 18 (12193 events) Module Alias: "pci:v00008086d00002832sv00001028sd000001DAbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.IPsPxV8JXp1 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2834 "82801H (ICH8 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff20-0xff3f (rw) IRQ: 16 (372635 events) Module Alias: "pci:v00008086d00002834sv00001028sd000001DAbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.El4Q0EgUQH0 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2830 "82801H (ICH8 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff80-0xff9f (rw) IRQ: 23 (3 events) Module Alias: "pci:v00008086d00002830sv00001028sd000001DAbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.uu656xgWDX7 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283a "82801H (ICH8 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfe9fbc00-0xfe9fbfff (rw,non-prefetchable) IRQ: 22 (436164 events) Module Alias: "pci:v00008086d0000283Asv00001028sd000001DAbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1c.4: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: QSNP.WavskvsUbd5 SysFS ID: /devices/pci0000:00/0000:00:1c.4 SysFS BusID: 0000:00:1c.4 Hardware Class: bridge Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2847 "82801H (ICH8 Family) PCI Express Port 5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "pcieport" IRQ: 16 (372635 events) Module Alias: "pci:v00008086d00002847sv00001028sd000001DAbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.jkpjZslMf_4 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 965Q" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2992 "965Q" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da Revision: 0x02 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea00000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0xecb8-0xecbf (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (372635 events) Module Alias: "pci:v00008086d00002992sv00001028sd000001DAbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.qEL5BjsT6Q7 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Dell OptiPlex 745" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2836 "82801H (ICH8 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01da "OptiPlex 745" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xff980800-0xff980bff (rw,non-prefetchable) IRQ: 23 (3 events) Module Alias: "pci:v00008086d00002836sv00001028sd000001DAbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.6aJQPvDTSVD Parent ID: _Znp.jkpjZslMf_4 Hardware Class: monitor Model: "DELL 1707FP" Vendor: DEL "DELL" Device: eisa 0x4012 "DELL 1707FP" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@75Hz Resolution: 1280x1024@60Hz Size: 338x270 mm Year of Manufacture: 2006 Week of Manufacture: 33 Detailed Timings #0: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-76 Hz Hor. Sync Range: 30-81 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (VGA compatible controller) 26: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.QIJJ_OUHlf7 Parent ID: w7Y8.xG+LtX+OHI0 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "KINGSTON SA400S3" Vendor: "KINGSTON" Device: "SA400S3" Revision: "B1E1" Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (IDE interface) 27: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.l91AVonByf0 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 28: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.IPsPxV8JXp1 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 29: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.GazvzMvuT21 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) 30: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: 2UT6.pN+A6IzbQa4 Parent ID: k4bc.cO89g+iefn1 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0 SysFS BusID: 1-3:1.0 Hardware Class: network Model: "Ralink MT7601U Wireless Adapter" Hotplug: USB Vendor: usb 0x148f "Ralink Technology, Corp." Device: usb 0x7601 "MT7601U Wireless Adapter" Serial ID: -- Driver: "mt7601u" Driver Modules: "mt7601u" Device File: wlxc02567ba1008 Features: WLAN Speed: 480 Mbps HW Address: ... Permanent HW Address: ... Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v148Fp7601d0000dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: mt7601u is active Driver Activation Cmd: "modprobe mt7601u" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (Hub) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.ppo9Q4G03C2 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (USB Controller) 32: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: datd.FU7RzlCqvuE Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0 SysFS BusID: 7-1:1.0 Hardware Class: mouse Model: "USB OPTICAL MOUSE" Hotplug: USB Vendor: usb 0x0000 Device: usb 0x3825 "USB OPTICAL MOUSE" Revision: "1.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v0000p3825d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.uu656xgWDX7 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.El4Q0EgUQH0 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 35: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: 2jVo.A_fMT01I2mA Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0 SysFS BusID: 7-2:1.0 Hardware Class: keyboard Model: "Dell Model L100 Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2105 "Model L100 Keyboard" Revision: "3.52" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2105d0352dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.qEL5BjsT6Q7 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 37: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 15.6.5 "Intel(R) Pentium(R) D CPU 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,cpuid,pni,dtes64,monitor,ds_cpl,est,cid,cx16,xtpr,pdcm,lahf_lm,pti Clock: 2992 MHz BogoMips: 5984.93 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 38: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 15.6.5 "Intel(R) Pentium(R) D CPU 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,cpuid,pni,dtes64,monitor,ds_cpl,est,cid,cx16,xtpr,pdcm,lahf_lm,pti Clock: 2992 MHz BogoMips: 5984.93 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 39: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: t1hu.ndpeucax6V1 Parent ID: 2UT6.pN+A6IzbQa4 SysFS ID: /class/net/wlxc02567ba1008 SysFS Device Link: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "mt7601u" Driver Modules: "mt7601u" Device File: wlxc02567ba1008 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (WLAN controller) 41: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 92a1.ndpeucax6V1 Parent ID: UOJ9.RxL2MbagOmD SysFS ID: /class/net/enp3s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.4/0000:03:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp3s0 HW Address: ... Permanent HW Address: ... Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (Ethernet controller)