/dev/sda smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150500.55.36-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST500DM002-1BD142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: KC45 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Nov 23 15:03:31 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 81) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 106 089 006 - 11671328 3 Spin_Up_Time PO---- 100 097 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 8137 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 079 060 030 - 26346906517 9 Power_On_Hours -O--CK 075 075 000 - 22403 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5851 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 418 188 Command_Timeout -O--CK 100 099 000 - 1 1 21 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 058 045 - 27 (Min/Max 23/27) 194 Temperature_Celsius -O---K 027 042 000 - 27 (0 8 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 059 032 000 - 11671328 197 Current_Pending_Sector -O--C- 100 097 000 - 0 198 Offline_Uncorrectable ----C- 100 097 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 240 Head_Flying_Hours ------ 100 253 000 - 22461h+29m+17.088s 241 Total_LBAs_Written ------ 100 253 000 - 576377595 242 Total_LBAs_Read ------ 100 253 000 - 1778213209 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 119 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 119 [18] occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 04 c8 c2 10 00 00 Error: UNC at LBA = 0x04c8c210 = 80265744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 04 c8 c2 10 e4 00 00:00:11.698 READ DMA ea 00 00 00 00 00 00 1c c6 e2 e7 a0 00 00:00:11.685 FLUSH CACHE EXT 35 00 00 00 08 00 00 1c c6 e2 e0 e0 00 00:00:11.684 WRITE DMA EXT ea 00 00 00 00 00 00 00 01 0e 27 a0 00 00:00:11.669 FLUSH CACHE EXT c8 00 00 00 08 00 00 05 01 0e 20 e5 00 00:00:11.645 READ DMA Error 118 [17] occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 04 c8 c2 10 00 00 Error: UNC at LBA = 0x04c8c210 = 80265744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 04 c8 c2 10 e4 00 00:00:07.665 READ DMA c8 00 00 00 08 00 00 05 01 0d d0 e5 00 00:00:07.658 READ DMA c8 00 00 00 08 00 00 04 c8 c2 08 e4 00 00:00:07.657 READ DMA c8 00 00 00 08 00 00 04 c8 c2 00 e4 00 00:00:07.656 READ DMA c8 00 00 00 08 00 00 04 c8 c1 f8 e4 00 00:00:07.656 READ DMA Error 117 [16] occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 04 c8 c2 10 00 00 Error: UNC at LBA = 0x04c8c210 = 80265744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 04 c8 c1 e8 e0 00 00:00:03.585 READ DMA EXT c8 00 00 00 08 00 00 05 01 0d e8 e5 00 00:00:03.579 READ DMA c8 00 00 00 08 00 00 04 c8 ca a8 e4 00 00:00:03.573 READ DMA c8 00 00 00 08 00 00 05 01 0a d0 e5 00 00:00:03.570 READ DMA c8 00 00 00 08 00 00 04 c8 c9 a8 e4 00 00:00:03.567 READ DMA Error 116 [15] occurred at disk power-on lifetime: 1449 hours (60 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 2a e4 e0 00 00 Error: UNC at LBA = 0x012ae4e0 = 19588320 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 01 2a e4 e0 e1 00 00:55:38.208 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:55:38.207 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:55:38.199 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:55:38.193 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:55:38.171 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 115 [14] occurred at disk power-on lifetime: 1449 hours (60 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 2a e4 e0 00 00 Error: UNC at LBA = 0x012ae4e0 = 19588320 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 01 2a e4 e0 e1 00 00:55:34.432 READ DMA c8 00 00 00 00 00 00 01 2a e5 d0 e1 00 00:55:34.408 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:55:34.407 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:55:34.399 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:55:34.353 SET FEATURES [Set transfer mode] Error 114 [13] occurred at disk power-on lifetime: 1449 hours (60 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 2a e4 e0 00 00 Error: UNC at LBA = 0x012ae4e0 = 19588320 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 00 00 01 2a e4 d0 e1 00 00:55:30.373 READ DMA c8 00 00 00 00 00 00 01 2a e3 d0 e1 00 00:55:30.371 READ DMA c8 00 00 00 00 00 00 01 2a e2 d0 e1 00 00:55:30.370 READ DMA c8 00 00 00 00 00 00 01 2a e1 d0 e1 00 00:55:30.368 READ DMA c8 00 00 00 00 00 00 01 2a e0 d0 e1 00 00:55:30.366 READ DMA Error 113 [12] occurred at disk power-on lifetime: 1423 hours (59 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 25 00 80 00 00 Error: UNC at LBA = 0x00250080 = 2424960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 25 00 80 e0 00 00:17:28.418 READ DMA 35 00 00 04 00 00 00 29 c0 79 00 e0 00 00:17:28.410 WRITE DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:17:28.409 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:17:28.401 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:17:28.394 SET FEATURES [Set transfer mode] Error 112 [11] occurred at disk power-on lifetime: 1423 hours (59 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 25 00 80 00 00 Error: UNC at LBA = 0x00250080 = 2424960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 25 00 80 e0 00 00:17:24.639 READ DMA 35 00 00 04 00 00 00 29 c0 75 00 e0 00 00:17:24.197 WRITE DMA EXT 35 00 00 04 00 00 00 29 c0 71 00 e0 00 00:17:24.190 WRITE DMA EXT 35 00 00 04 00 00 00 29 c0 6d 00 e0 00 00:17:24.181 WRITE DMA EXT 35 00 00 04 00 00 00 29 c0 69 00 e0 00 00:17:24.173 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22397 - # 2 Short offline Completed without error 00% 22388 - # 3 Short offline Completed without error 00% 22375 - # 4 Short offline Completed without error 00% 22357 - # 5 Short offline Completed without error 00% 22349 - # 6 Short offline Completed without error 00% 22338 - # 7 Short offline Completed without error 00% 22322 - # 8 Short offline Completed without error 00% 22299 - # 9 Short offline Completed without error 00% 22285 - #10 Short offline Completed without error 00% 22276 - #11 Short offline Completed without error 00% 22275 - #12 Short offline Completed without error 00% 22250 - #13 Short offline Completed without error 00% 22234 - #14 Short offline Completed without error 00% 22225 - #15 Short offline Completed without error 00% 22218 - #16 Short offline Completed without error 00% 22206 - #17 Short offline Completed without error 00% 22188 - #18 Short offline Completed without error 00% 22174 - #19 Extended offline Completed without error 00% 22172 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 23/27 Celsius Lifetime Min/Max Temperature: 8/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2023-11-18 09:52 27 ******** ... ..( 11 skipped). .. ******** 69 2023-11-18 21:40 27 ******** 70 2023-11-18 22:39 ? - 71 2023-11-18 23:38 24 ***** 72 2023-11-19 00:37 27 ******** 73 2023-11-19 01:36 26 ******* 74 2023-11-19 02:35 26 ******* 75 2023-11-19 03:34 27 ******** ... ..( 2 skipped). .. ******** 78 2023-11-19 06:31 27 ******** 79 2023-11-19 07:30 28 ********* ... ..( 2 skipped). .. ********* 82 2023-11-19 10:27 28 ********* 83 2023-11-19 11:26 27 ******** 84 2023-11-19 12:25 28 ********* 85 2023-11-19 13:24 28 ********* 86 2023-11-19 14:23 ? - 87 2023-11-19 15:22 24 ***** 88 2023-11-19 16:21 28 ********* 89 2023-11-19 17:20 28 ********* 90 2023-11-19 18:19 26 ******* ... ..( 2 skipped). .. ******* 93 2023-11-19 21:16 26 ******* 94 2023-11-19 22:15 27 ******** 95 2023-11-19 23:14 ? - 96 2023-11-20 00:13 24 ***** 97 2023-11-20 01:12 28 ********* ... ..( 6 skipped). .. ********* 104 2023-11-20 08:05 28 ********* 105 2023-11-20 09:04 ? - 106 2023-11-20 10:03 22 *** 107 2023-11-20 11:02 27 ******** ... ..( 3 skipped). .. ******** 111 2023-11-20 14:58 27 ******** 112 2023-11-20 15:57 28 ********* 113 2023-11-20 16:56 28 ********* 114 2023-11-20 17:55 ? - 115 2023-11-20 18:54 22 *** 116 2023-11-20 19:53 ? - 117 2023-11-20 20:52 22 *** 118 2023-11-20 21:51 27 ******** ... ..( 7 skipped). .. ******** 126 2023-11-21 05:43 27 ******** 127 2023-11-21 06:42 ? - 0 2023-11-21 07:41 23 **** 1 2023-11-21 08:40 ? - 2 2023-11-21 09:39 23 **** 3 2023-11-21 10:38 26 ******* 4 2023-11-21 11:37 27 ******** 5 2023-11-21 12:36 27 ******** 6 2023-11-21 13:35 26 ******* 7 2023-11-21 14:34 26 ******* 8 2023-11-21 15:33 26 ******* 9 2023-11-21 16:32 25 ****** 10 2023-11-21 17:31 26 ******* 11 2023-11-21 18:30 26 ******* 12 2023-11-21 19:29 27 ******** 13 2023-11-21 20:28 28 ********* 14 2023-11-21 21:27 28 ********* 15 2023-11-21 22:26 27 ******** 16 2023-11-21 23:25 27 ******** 17 2023-11-22 00:24 ? - 18 2023-11-22 01:23 23 **** 19 2023-11-22 02:22 28 ********* 20 2023-11-22 03:21 ? - 21 2023-11-22 04:20 24 ***** 22 2023-11-22 05:19 ? - 23 2023-11-22 06:18 23 **** 24 2023-11-22 07:17 26 ******* 25 2023-11-22 08:16 26 ******* 26 2023-11-22 09:15 ? - 27 2023-11-22 10:14 24 ***** 28 2023-11-22 11:13 28 ********* 29 2023-11-22 12:12 28 ********* 30 2023-11-22 13:11 28 ********* 31 2023-11-22 14:10 ? - 32 2023-11-22 15:09 26 ******* 33 2023-11-22 16:08 ? - 34 2023-11-22 17:07 27 ******** 35 2023-11-22 18:06 ? - 36 2023-11-22 19:05 23 **** 37 2023-11-22 20:04 ? - 38 2023-11-22 21:03 24 ***** 39 2023-11-22 22:02 27 ******** 40 2023-11-22 23:01 26 ******* 41 2023-11-23 00:00 ? - 42 2023-11-23 00:59 23 **** 43 2023-11-23 01:58 ? - 44 2023-11-23 02:57 23 **** 45 2023-11-23 03:56 27 ******** ... ..( 3 skipped). .. ******** 49 2023-11-23 07:52 27 ******** 50 2023-11-23 08:51 28 ********* 51 2023-11-23 09:50 ? - 52 2023-11-23 10:49 23 **** 53 2023-11-23 11:48 27 ******** ... ..( 2 skipped). .. ******** 56 2023-11-23 14:45 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150500.55.36-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547550A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JE3OA50B User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Nov 23 15:03:31 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 198 198 040 - 143 3 Spin_Up_Time POS--- 166 166 033 - 1 4 Start_Stop_Count -O--C- 095 095 000 - 8335 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 112 112 040 - 35 9 Power_On_Hours -O--C- 049 049 000 - 22711 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 6517 160 Unknown_Attribute PO-RCK 100 100 001 - 0 191 G-Sense_Error_Rate -O-R-- 098 098 000 - 4 192 Power-Off_Retract_Count -O--CK 099 099 000 - 203 193 Load_Cycle_Count -O--C- 022 022 000 - 784053 194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 5/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 349 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 52 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 349 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 349 [0] occurred at disk power-on lifetime: 21459 hours (894 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 08 5f 00 00 Error: ICRC, ABRT at LBA = 0x0000085f = 2143 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 20 00 18 00 00 00 35 83 60 40 00 05:28:37.726 WRITE FPDMA QUEUED 61 00 20 00 10 00 00 00 35 82 80 40 00 05:28:37.726 WRITE FPDMA QUEUED 61 00 20 00 08 00 00 00 35 82 40 40 00 05:28:37.726 WRITE FPDMA QUEUED 61 00 20 00 00 00 00 00 00 08 40 40 00 05:28:37.726 WRITE FPDMA QUEUED 61 00 0b 00 f0 00 00 1d 1d db 7a 40 00 05:28:37.726 WRITE FPDMA QUEUED Error 348 [3] occurred at disk power-on lifetime: 21459 hours (894 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 35 82 3f 00 00 Error: ICRC, ABRT at LBA = 0x0035823f = 3506751 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 20 00 48 00 00 00 00 08 60 40 00 05:28:07.006 WRITE FPDMA QUEUED 61 00 40 00 68 00 00 00 3d f3 00 40 00 05:28:07.006 WRITE FPDMA QUEUED 61 00 20 00 60 00 00 00 35 82 20 40 00 05:28:07.006 WRITE FPDMA QUEUED 61 00 0d 00 58 00 00 1d 1d db 6d 40 00 05:28:07.006 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 05:28:07.006 FLUSH CACHE EXT Error 347 [2] occurred at disk power-on lifetime: 21411 hours (892 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 10 00 00 00 3e 03 b0 00 00 Error: ICRC, ABRT at LBA = 0x003e03b0 = 4064176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 20 00 70 00 00 01 b6 cf c0 40 00 05:50:57.801 WRITE FPDMA QUEUED 61 00 20 00 f8 00 00 00 3e 03 a0 40 00 05:50:57.800 WRITE FPDMA QUEUED 61 00 20 00 b8 00 00 00 35 ed 80 40 00 05:50:57.800 WRITE FPDMA QUEUED 61 00 20 00 b0 00 00 00 35 83 c0 40 00 05:50:57.800 WRITE FPDMA QUEUED 61 00 20 00 08 00 00 00 35 82 a0 40 00 05:50:57.800 WRITE FPDMA QUEUED Error 346 [1] occurred at disk power-on lifetime: 21411 hours (892 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 06 00 00 00 1d 1d e4 48 0d 00 Error: ICRC, ABRT at LBA = 0x1d1de448 = 488498248 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 06 00 00 d0 00 00 1d 1d e4 48 40 00 05:48:53.678 WRITE FPDMA QUEUED 61 0a 00 00 c8 00 00 1d 1d da 48 40 00 05:48:53.678 WRITE FPDMA QUEUED 60 00 01 00 c0 00 00 1d 1d da 47 40 00 05:48:53.674 READ FPDMA QUEUED 60 00 01 00 08 00 00 1d 1d da 46 40 00 05:48:53.674 READ FPDMA QUEUED 60 00 01 00 b8 00 00 1d 1d da 47 40 00 05:48:53.674 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22704 - # 2 Short offline Completed without error 00% 22695 - # 3 Short offline Completed without error 00% 22682 - # 4 Short offline Completed without error 00% 22664 - # 5 Short offline Completed without error 00% 22655 - # 6 Short offline Completed without error 00% 22645 - # 7 Short offline Completed without error 00% 22628 - # 8 Short offline Completed without error 00% 22605 - # 9 Short offline Completed without error 00% 22591 - #10 Short offline Completed without error 00% 22582 - #11 Short offline Completed without error 00% 22580 - #12 Short offline Completed without error 00% 22556 - #13 Short offline Completed without error 00% 22539 - #14 Short offline Completed without error 00% 22530 - #15 Short offline Completed without error 00% 22523 - #16 Short offline Completed without error 00% 22511 - #17 Short offline Completed without error 00% 22493 - #18 Short offline Completed without error 00% 22479 - #19 Extended offline Completed without error 00% 22477 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 23/27 Celsius Lifetime Min/Max Temperature: 5/44 Celsius Specified Max Operating Temperature: 28 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (45) Index Estimated Time Temperature Celsius 46 2023-11-23 12:56 26 ******* ... ..( 20 skipped). .. ******* 67 2023-11-23 13:17 26 ******* 68 2023-11-23 13:18 25 ****** 69 2023-11-23 13:19 26 ******* 70 2023-11-23 13:20 26 ******* 71 2023-11-23 13:21 26 ******* 72 2023-11-23 13:22 25 ****** 73 2023-11-23 13:23 25 ****** 74 2023-11-23 13:24 26 ******* 75 2023-11-23 13:25 25 ****** 76 2023-11-23 13:26 25 ****** 77 2023-11-23 13:27 25 ****** 78 2023-11-23 13:28 26 ******* 79 2023-11-23 13:29 26 ******* 80 2023-11-23 13:30 25 ****** 81 2023-11-23 13:31 26 ******* 82 2023-11-23 13:32 25 ****** ... ..( 3 skipped). .. ****** 86 2023-11-23 13:36 25 ****** 87 2023-11-23 13:37 26 ******* 88 2023-11-23 13:38 25 ****** 89 2023-11-23 13:39 25 ****** 90 2023-11-23 13:40 26 ******* 91 2023-11-23 13:41 25 ****** 92 2023-11-23 13:42 25 ****** 93 2023-11-23 13:43 25 ****** 94 2023-11-23 13:44 26 ******* 95 2023-11-23 13:45 25 ****** ... ..( 44 skipped). .. ****** 12 2023-11-23 14:30 25 ****** 13 2023-11-23 14:31 26 ******* 14 2023-11-23 14:32 26 ******* 15 2023-11-23 14:33 26 ******* 16 2023-11-23 14:34 25 ****** 17 2023-11-23 14:35 25 ****** 18 2023-11-23 14:36 26 ******* ... ..( 5 skipped). .. ******* 24 2023-11-23 14:42 26 ******* 25 2023-11-23 14:43 25 ****** 26 2023-11-23 14:44 26 ******* ... ..( 18 skipped). .. ******* 45 2023-11-23 15:03 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150500.55.36-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD5000AZRX-00A8LB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Nov 23 15:03:32 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 92) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 136 132 021 - 4183 4 Start_Stop_Count -O--CK 093 093 000 - 7175 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 062 062 000 - 27874 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7140 192 Power-Off_Retract_Count -O--CK 189 189 000 - 8925 193 Load_Cycle_Count -O--CK 095 095 000 - 315129 194 Temperature_Celsius -O---K 116 102 000 - 27 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 27868 - # 2 Short offline Completed without error 00% 27858 - # 3 Short offline Completed without error 00% 27845 - # 4 Short offline Completed without error 00% 27828 - # 5 Short offline Completed without error 00% 27819 - # 6 Short offline Completed without error 00% 27808 - # 7 Short offline Completed without error 00% 27792 - # 8 Short offline Completed without error 00% 27769 - # 9 Short offline Completed without error 00% 27755 - #10 Short offline Completed without error 00% 27745 - #11 Short offline Completed without error 00% 27744 - #12 Short offline Completed without error 00% 27719 - #13 Short offline Completed without error 00% 27703 - #14 Short offline Completed without error 00% 27694 - #15 Short offline Completed without error 00% 27687 - #16 Short offline Completed without error 00% 27674 - #17 Short offline Completed without error 00% 27657 - #18 Short offline Completed without error 00% 27643 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 24/27 Celsius Lifetime Min/Max Temperature: 0/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (350) Index Estimated Time Temperature Celsius 351 2023-11-23 07:06 27 ******** ... ..( 9 skipped). .. ******** 361 2023-11-23 07:16 27 ******** 362 2023-11-23 07:17 ? - 363 2023-11-23 07:18 24 ***** ... ..( 2 skipped). .. ***** 366 2023-11-23 07:21 24 ***** 367 2023-11-23 07:22 25 ****** 368 2023-11-23 07:23 25 ****** 369 2023-11-23 07:24 25 ****** 370 2023-11-23 07:25 26 ******* ... ..( 3 skipped). .. ******* 374 2023-11-23 07:29 26 ******* 375 2023-11-23 07:30 27 ******** ... ..(218 skipped). .. ******** 116 2023-11-23 11:09 27 ******** 117 2023-11-23 11:10 26 ******* 118 2023-11-23 11:11 27 ******** ... ..(117 skipped). .. ******** 236 2023-11-23 13:09 27 ******** 237 2023-11-23 13:10 28 ********* 238 2023-11-23 13:11 27 ******** ... ..( 7 skipped). .. ******** 246 2023-11-23 13:19 27 ******** 247 2023-11-23 13:20 28 ********* 248 2023-11-23 13:21 27 ******** ... ..( 7 skipped). .. ******** 256 2023-11-23 13:29 27 ******** 257 2023-11-23 13:30 28 ********* 258 2023-11-23 13:31 27 ******** ... ..( 7 skipped). .. ******** 266 2023-11-23 13:39 27 ******** 267 2023-11-23 13:40 28 ********* ... ..( 11 skipped). .. ********* 279 2023-11-23 13:52 28 ********* 280 2023-11-23 13:53 27 ******** ... ..( 5 skipped). .. ******** 286 2023-11-23 13:59 27 ******** 287 2023-11-23 14:00 28 ********* 288 2023-11-23 14:01 27 ******** ... ..( 7 skipped). .. ******** 296 2023-11-23 14:09 27 ******** 297 2023-11-23 14:10 28 ********* 298 2023-11-23 14:11 27 ******** ... ..( 7 skipped). .. ******** 306 2023-11-23 14:19 27 ******** 307 2023-11-23 14:20 28 ********* 308 2023-11-23 14:21 27 ******** ... ..( 7 skipped). .. ******** 316 2023-11-23 14:29 27 ******** 317 2023-11-23 14:30 28 ********* 318 2023-11-23 14:31 27 ******** ... ..( 6 skipped). .. ******** 325 2023-11-23 14:38 27 ******** 326 2023-11-23 14:39 28 ********* 327 2023-11-23 14:40 28 ********* 328 2023-11-23 14:41 27 ******** ... ..( 7 skipped). .. ******** 336 2023-11-23 14:49 27 ******** 337 2023-11-23 14:50 28 ********* 338 2023-11-23 14:51 27 ******** ... ..( 11 skipped). .. ******** 350 2023-11-23 15:03 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 16965 Vendor specific