/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7TY128HDHP-000L1 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: MAT03L0Q User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Aug 14 18:18:31 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 092 092 000 - 38181 12 Power_Cycle_Count -O--CK 099 099 000 - 841 170 Unused_Rsvd_Blk_Ct_Chip -O--CK 100 100 010 - 0 171 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 173 Wear_Leveling_Count PO--CK 001 001 005 NOW 1105 174 Unexpect_Power_Loss_Ct -O--CK 099 099 000 - 364 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 931 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 194 Temperature_Celsius -O--CK 057 037 000 - 43 (Min/Max 19/63) 199 CRC_Error_Count -OSRCK 100 100 000 - 0 233 Media_Wearout_Indicator PO--C- 001 001 001 NOW 258956972177490 241 Total_LBAs_Written -O--CK 099 099 000 - 39025 242 Total_LBAs_Read -O--CK 099 099 000 - 32563 249 NAND_Writes_1GiB -O--CK 099 099 000 - 141536 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: unknown failure 90% 38167 0 # 2 Short offline Completed: unknown failure 90% 38164 0 # 3 Short offline Completed: unknown failure 90% 38155 0 # 4 Short offline Completed: unknown failure 90% 38153 0 # 5 Short offline Completed: unknown failure 90% 38146 0 # 6 Short offline Completed: unknown failure 90% 38145 0 # 7 Short offline Completed: unknown failure 90% 38138 0 # 8 Short offline Completed: unknown failure 90% 38138 0 # 9 Short offline Completed: unknown failure 90% 38130 0 #10 Short offline Completed: unknown failure 90% 38130 0 #11 Extended offline Completed: unknown failure 90% 38129 0 #12 Extended offline Completed: unknown failure 90% 38125 0 #13 Short offline Completed: unknown failure 90% 38072 0 #14 Short offline Completed: unknown failure 90% 38071 0 #15 Short offline Completed: unknown failure 90% 38070 0 #16 Short offline Completed: unknown failure 90% 38062 0 #17 Short offline Completed: unknown failure 90% 38056 0 #18 Short offline Completed: unknown failure 90% 38056 0 #19 Short offline Completed: unknown failure 90% 38049 0 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 49 Celsius Power Cycle Min/Max Temperature: 39/49 Celsius Lifetime Min/Max Temperature: 25/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (60) Index Estimated Time Temperature Celsius 61 2022-08-13 21:00 42 *********************** 62 2022-08-13 21:10 41 ********************** 63 2022-08-13 21:20 42 *********************** 64 2022-08-13 21:30 41 ********************** 65 2022-08-13 21:40 40 ********************* 66 2022-08-13 21:50 42 *********************** 67 2022-08-13 22:00 42 *********************** 68 2022-08-13 22:10 41 ********************** 69 2022-08-13 22:20 42 *********************** 70 2022-08-13 22:30 42 *********************** 71 2022-08-13 22:40 ? - 72 2022-08-13 22:50 38 ******************* 73 2022-08-13 23:00 39 ******************** 74 2022-08-13 23:10 39 ******************** 75 2022-08-13 23:20 39 ******************** 76 2022-08-13 23:30 40 ********************* 77 2022-08-13 23:40 ? - 78 2022-08-13 23:50 37 ****************** 79 2022-08-14 00:00 38 ******************* 80 2022-08-14 00:10 39 ******************** 81 2022-08-14 00:20 39 ******************** 82 2022-08-14 00:30 40 ********************* ... ..( 9 skipped). .. ********************* 92 2022-08-14 02:10 40 ********************* 93 2022-08-14 02:20 ? - 94 2022-08-14 02:30 39 ******************** 95 2022-08-14 02:40 41 ********************** 96 2022-08-14 02:50 40 ********************* 97 2022-08-14 03:00 42 *********************** 98 2022-08-14 03:10 41 ********************** 99 2022-08-14 03:20 41 ********************** 100 2022-08-14 03:30 42 *********************** 101 2022-08-14 03:40 42 *********************** 102 2022-08-14 03:50 42 *********************** 103 2022-08-14 04:00 41 ********************** 104 2022-08-14 04:10 41 ********************** 105 2022-08-14 04:20 ? - ... ..( 4 skipped). .. - 110 2022-08-14 05:10 ? - 111 2022-08-14 05:20 45 ************************** 112 2022-08-14 05:30 41 ********************** 113 2022-08-14 05:40 41 ********************** 114 2022-08-14 05:50 43 ************************ 115 2022-08-14 06:00 41 ********************** 116 2022-08-14 06:10 42 *********************** 117 2022-08-14 06:20 41 ********************** 118 2022-08-14 06:30 40 ********************* 119 2022-08-14 06:40 40 ********************* 120 2022-08-14 06:50 42 *********************** 121 2022-08-14 07:00 41 ********************** 122 2022-08-14 07:10 41 ********************** 123 2022-08-14 07:20 46 *************************** 124 2022-08-14 07:30 52 ********************************* 125 2022-08-14 07:40 54 *********************************** 126 2022-08-14 07:50 47 **************************** 127 2022-08-14 08:00 46 *************************** 0 2022-08-14 08:10 43 ************************ 1 2022-08-14 08:20 42 *********************** 2 2022-08-14 08:30 41 ********************** 3 2022-08-14 08:40 42 *********************** 4 2022-08-14 08:50 41 ********************** 5 2022-08-14 09:00 41 ********************** 6 2022-08-14 09:10 41 ********************** 7 2022-08-14 09:20 42 *********************** 8 2022-08-14 09:30 41 ********************** 9 2022-08-14 09:40 41 ********************** 10 2022-08-14 09:50 42 *********************** 11 2022-08-14 10:00 40 ********************* 12 2022-08-14 10:10 41 ********************** ... ..( 3 skipped). .. ********************** 16 2022-08-14 10:50 41 ********************** 17 2022-08-14 11:00 ? - 18 2022-08-14 11:10 41 ********************** 19 2022-08-14 11:20 43 ************************ 20 2022-08-14 11:30 41 ********************** ... ..( 2 skipped). .. ********************** 23 2022-08-14 12:00 41 ********************** 24 2022-08-14 12:10 ? - 25 2022-08-14 12:20 48 ***************************** 26 2022-08-14 12:30 41 ********************** 27 2022-08-14 12:40 42 *********************** 28 2022-08-14 12:50 41 ********************** 29 2022-08-14 13:00 43 ************************ 30 2022-08-14 13:10 42 *********************** 31 2022-08-14 13:20 42 *********************** 32 2022-08-14 13:30 41 ********************** ... ..( 4 skipped). .. ********************** 37 2022-08-14 14:20 41 ********************** 38 2022-08-14 14:30 43 ************************ 39 2022-08-14 14:40 41 ********************** 40 2022-08-14 14:50 40 ********************* ... ..( 3 skipped). .. ********************* 44 2022-08-14 15:30 40 ********************* 45 2022-08-14 15:40 42 *********************** 46 2022-08-14 15:50 41 ********************** 47 2022-08-14 16:00 40 ********************* 48 2022-08-14 16:10 40 ********************* 49 2022-08-14 16:20 40 ********************* 50 2022-08-14 16:30 ? - 51 2022-08-14 16:40 37 ****************** 52 2022-08-14 16:50 48 ***************************** 53 2022-08-14 17:00 40 ********************* 54 2022-08-14 17:10 42 *********************** 55 2022-08-14 17:20 ? - 56 2022-08-14 17:30 39 ******************** 57 2022-08-14 17:40 41 ********************** 58 2022-08-14 17:50 41 ********************** 59 2022-08-14 18:00 41 ********************** 60 2022-08-14 18:10 49 ****************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 14 18:18:32 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 85138946 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4322 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 123372478 9 Power_On_Hours -O--CK 058 058 000 - 37448 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 037 020 - 2156 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 071 000 - 313537396827 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 058 043 045 Past 42 (Min/Max 33/42 #141) 194 Temperature_Celsius -O---K 042 057 000 - 42 (0 7 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 053 037 000 - 85138946 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 31 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL,SL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 37432 - # 2 Short offline Completed without error 00% 37420 - # 3 Short offline Completed without error 00% 37413 - # 4 Short offline Completed without error 00% 37405 - # 5 Short offline Completed without error 00% 37398 - # 6 Extended offline Completed without error 00% 37395 - # 7 Short offline Completed without error 00% 37340 - # 8 Short offline Completed without error 00% 37332 - # 9 Short offline Completed without error 00% 37326 - #10 Short offline Completed without error 00% 37318 - #11 Short offline Completed without error 00% 37307 - #12 Short offline Completed without error 00% 32325 - #13 Short offline Completed without error 00% 18521 - #14 Short offline Completed without error 00% 1962 - #15 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 33/42 Celsius Lifetime Min/Max Temperature: 7/57 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 2 minutes Temperature Logging Interval: 94 minutes Min/Max recommended Temperature: 1/61 Celsius Min/Max Temperature Limit: 2/60 Celsius Temperature History Size (Index): 128 (98) Index Estimated Time Temperature Celsius 99 2022-08-06 10:04 ? - 100 2022-08-06 11:38 31 ************ 101 2022-08-06 13:12 31 ************ 102 2022-08-06 14:46 40 ********************* 103 2022-08-06 16:20 40 ********************* 104 2022-08-06 17:54 41 ********************** 105 2022-08-06 19:28 40 ********************* 106 2022-08-06 21:02 42 *********************** 107 2022-08-06 22:36 42 *********************** 108 2022-08-07 00:10 41 ********************** 109 2022-08-07 01:44 ? - 110 2022-08-07 03:18 41 ********************** 111 2022-08-07 04:52 41 ********************** 112 2022-08-07 06:26 ? - 113 2022-08-07 08:00 32 ************* 114 2022-08-07 09:34 ? - 115 2022-08-07 11:08 42 *********************** 116 2022-08-07 12:42 ? - 117 2022-08-07 14:16 38 ******************* 118 2022-08-07 15:50 ? - 119 2022-08-07 17:24 42 *********************** 120 2022-08-07 18:58 42 *********************** 121 2022-08-07 20:32 41 ********************** 122 2022-08-07 22:06 41 ********************** 123 2022-08-07 23:40 40 ********************* 124 2022-08-08 01:14 ? - 125 2022-08-08 02:48 31 ************ 126 2022-08-08 04:22 ? - 127 2022-08-08 05:56 33 ************** 0 2022-08-08 07:30 33 ************** 1 2022-08-08 09:04 46 *************************** 2 2022-08-08 10:38 41 ********************** 3 2022-08-08 12:12 ? - 4 2022-08-08 13:46 31 ************ 5 2022-08-08 15:20 ? - 6 2022-08-08 16:54 34 *************** 7 2022-08-08 18:28 34 *************** 8 2022-08-08 20:02 41 ********************** 9 2022-08-08 21:36 43 ************************ 10 2022-08-08 23:10 42 *********************** 11 2022-08-09 00:44 42 *********************** 12 2022-08-09 02:18 ? - 13 2022-08-09 03:52 33 ************** 14 2022-08-09 05:26 ? - 15 2022-08-09 07:00 43 ************************ 16 2022-08-09 08:34 ? - 17 2022-08-09 10:08 43 ************************ 18 2022-08-09 11:42 ? - 19 2022-08-09 13:16 43 ************************ 20 2022-08-09 14:50 ? - 21 2022-08-09 16:24 43 ************************ 22 2022-08-09 17:58 ? - 23 2022-08-09 19:32 43 ************************ 24 2022-08-09 21:06 ? - 25 2022-08-09 22:40 43 ************************ 26 2022-08-10 00:14 ? - 27 2022-08-10 01:48 43 ************************ 28 2022-08-10 03:22 ? - 29 2022-08-10 04:56 43 ************************ 30 2022-08-10 06:30 ? - 31 2022-08-10 08:04 42 *********************** 32 2022-08-10 09:38 ? - 33 2022-08-10 11:12 42 *********************** 34 2022-08-10 12:46 ? - 35 2022-08-10 14:20 42 *********************** 36 2022-08-10 15:54 ? - 37 2022-08-10 17:28 42 *********************** 38 2022-08-10 19:02 ? - 39 2022-08-10 20:36 43 ************************ 40 2022-08-10 22:10 43 ************************ 41 2022-08-10 23:44 43 ************************ 42 2022-08-11 01:18 42 *********************** 43 2022-08-11 02:52 ? - 44 2022-08-11 04:26 32 ************* 45 2022-08-11 06:00 ? - 46 2022-08-11 07:34 34 *************** 47 2022-08-11 09:08 34 *************** 48 2022-08-11 10:42 42 *********************** 49 2022-08-11 12:16 43 ************************ 50 2022-08-11 13:50 42 *********************** 51 2022-08-11 15:24 ? - 52 2022-08-11 16:58 31 ************ 53 2022-08-11 18:32 31 ************ 54 2022-08-11 20:06 41 ********************** 55 2022-08-11 21:40 ? - 56 2022-08-11 23:14 33 ************** 57 2022-08-12 00:48 33 ************** 58 2022-08-12 02:22 41 ********************** 59 2022-08-12 03:56 43 ************************ 60 2022-08-12 05:30 42 *********************** 61 2022-08-12 07:04 41 ********************** 62 2022-08-12 08:38 ? - 63 2022-08-12 10:12 32 ************* 64 2022-08-12 11:46 ? - 65 2022-08-12 13:20 31 ************ 66 2022-08-12 14:54 31 ************ 67 2022-08-12 16:28 40 ********************* 68 2022-08-12 18:02 ? - 69 2022-08-12 19:36 32 ************* 70 2022-08-12 21:10 32 ************* 71 2022-08-12 22:44 40 ********************* 72 2022-08-13 00:18 ? - 73 2022-08-13 01:52 40 ********************* 74 2022-08-13 03:26 ? - 75 2022-08-13 05:00 41 ********************** 76 2022-08-13 06:34 ? - 77 2022-08-13 08:08 41 ********************** 78 2022-08-13 09:42 ? - 79 2022-08-13 11:16 41 ********************** 80 2022-08-13 12:50 ? - 81 2022-08-13 14:24 41 ********************** 82 2022-08-13 15:58 ? - 83 2022-08-13 17:32 41 ********************** 84 2022-08-13 19:06 41 ********************** 85 2022-08-13 20:40 40 ********************* 86 2022-08-13 22:14 41 ********************** 87 2022-08-13 23:48 41 ********************** 88 2022-08-14 01:22 ? - 89 2022-08-14 02:56 31 ************ 90 2022-08-14 04:30 ? - 91 2022-08-14 06:04 33 ************** 92 2022-08-14 07:38 33 ************** 93 2022-08-14 09:12 41 ********************** 94 2022-08-14 10:46 ? - 95 2022-08-14 12:20 31 ************ 96 2022-08-14 13:54 ? - 97 2022-08-14 15:28 33 ************** 98 2022-08-14 17:02 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M5 Device Model: SAMSUNG HM121HI Serial Number: -- LU WWN Device Id: 5 0f0000 ... Firmware Version: LZ100-11 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Sun Aug 14 18:18:32 2022 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error medium or hardware error (serious) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 40) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 48) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 48) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 3 3 Spin_Up_Time POS--- 252 252 025 - 2062 4 Start_Stop_Count -O--CK 059 059 000 - 416565 5 Reallocated_Sector_Ct PO--CK 042 042 010 - 547 9 Power_On_Hours -O--CK 084 084 000 - 8377 12 Power_Cycle_Count -O--CK 092 092 000 - 8122 191 G-Sense_Error_Rate -O--CK 100 100 000 - 3508 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1933 194 Temperature_Celsius -O---K 097 073 000 - 47 (Min/Max 11/55) 196 Reallocated_Event_Count -O--CK 100 100 000 - 56335 (0 6) 197 Current_Pending_Sector -O--C- 100 100 000 - 7346 198 Offline_Uncorrectable ----CK 100 100 000 - 20587 199 UDMA_CRC_Error_Count -OS-CK 252 252 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x08 SL R/O 1 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80 GPL,SL R/W 16 Host vendor specific log 0x81-0x9f SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 45 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 45 [4] occurred at disk power-on lifetime: 8228 hours (342 days + 20 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 01 e7 04 44 40 00 Error: UNC 8 sectors at LBA = 0x01e70444 = 31917124 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 01 e7 04 44 40 00 00:18:49.000 READ DMA EXT 25 00 00 00 50 00 00 01 f8 2a 5c 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 70 00 00 01 f8 29 ec 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 80 00 00 01 f8 29 6c 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 10 00 00 01 e4 eb 84 40 00 00:18:21.812 READ DMA EXT Error 44 [3] occurred at disk power-on lifetime: 8318 hours (346 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 05 93 23 58 40 00 Error: UNC 64 sectors at LBA = 0x05932358 = 93528920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 05 93 23 58 40 00 00:01:54.500 READ DMA EXT 25 00 00 00 20 00 00 05 93 23 38 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 08 00 00 05 93 23 30 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 10 00 00 05 97 e5 38 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 70 00 00 05 97 e4 c8 40 00 00:01:27.375 READ DMA EXT Error 43 [2] occurred at disk power-on lifetime: 8306 hours (346 days + 2 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 7c 77 4c 40 00 Error: UNC 128 sectors at LBA = 0x007c774c = 8157004 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 05 00 80 00 00 00 7c 77 4c 40 00 00:01:17.000 READ DMA EXT ef 00 05 00 fe 00 00 00 00 00 00 40 00 00:00:49.750 SET FEATURES [Enable APM] 25 00 00 00 10 00 00 00 66 92 18 40 00 00:00:49.750 READ DMA EXT 25 00 00 00 10 00 00 0d f8 48 f0 40 00 00:00:49.750 READ DMA EXT 25 00 00 00 20 00 00 00 7c 77 2c 40 00 00:00:49.750 READ DMA EXT Error 42 [1] occurred at disk power-on lifetime: 8303 hours (345 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 20 00 00 00 37 d2 00 40 00 Error: ABRT 32 sectors at LBA = 0x0037d200 = 3658240 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 37 d2 00 40 00 00:01:04.375 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 e0 40 00 00:01:03.562 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 c0 40 00 00:01:03.437 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 a0 40 00 00:01:03.312 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 80 40 00 00:01:03.187 READ DMA EXT Error 41 [0] occurred at disk power-on lifetime: 8228 hours (342 days + 20 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 01 e7 04 44 40 00 Error: UNC 8 sectors at LBA = 0x01e70444 = 31917124 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 01 e7 04 44 40 00 00:18:49.000 READ DMA EXT 25 00 00 00 50 00 00 01 f8 2a 5c 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 70 00 00 01 f8 29 ec 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 80 00 00 01 f8 29 6c 40 00 00:18:21.812 READ DMA EXT 25 00 00 00 10 00 00 01 e4 eb 84 40 00 00:18:21.812 READ DMA EXT Error 40 [7] occurred at disk power-on lifetime: 8318 hours (346 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 05 93 23 58 40 00 Error: UNC 64 sectors at LBA = 0x05932358 = 93528920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 05 93 23 58 40 00 00:01:54.500 READ DMA EXT 25 00 00 00 20 00 00 05 93 23 38 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 08 00 00 05 93 23 30 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 10 00 00 05 97 e5 38 40 00 00:01:27.375 READ DMA EXT 25 00 00 00 70 00 00 05 97 e4 c8 40 00 00:01:27.375 READ DMA EXT Error 39 [6] occurred at disk power-on lifetime: 8306 hours (346 days + 2 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 7c 77 4c 40 00 Error: UNC 128 sectors at LBA = 0x007c774c = 8157004 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 05 00 80 00 00 00 7c 77 4c 40 00 00:01:17.000 READ DMA EXT ef 00 05 00 fe 00 00 00 00 00 00 40 00 00:00:49.750 SET FEATURES [Enable APM] 25 00 00 00 10 00 00 00 66 92 18 40 00 00:00:49.750 READ DMA EXT 25 00 00 00 10 00 00 0d f8 48 f0 40 00 00:00:49.750 READ DMA EXT 25 00 00 00 20 00 00 00 7c 77 2c 40 00 00:00:49.750 READ DMA EXT Error 38 [5] occurred at disk power-on lifetime: 8303 hours (345 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 20 00 00 00 37 d2 00 40 00 Error: ABRT 32 sectors at LBA = 0x0037d200 = 3658240 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 37 d2 00 40 00 00:01:04.375 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 e0 40 00 00:01:03.562 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 c0 40 00 00:01:03.437 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 a0 40 00 00:01:03.312 READ DMA EXT 25 00 00 00 20 00 00 00 37 d1 80 40 00 00:01:03.187 READ DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 80% 7715 - # 2 Short offline Completed without error 00% 7526 - # 3 Short offline Aborted by host 90% 7467 - # 4 Short offline Completed without error 00% 1 - # 5 Short offline Interrupted (host reset) 70% 1 - # 6 Short offline Completed without error 00% 0 - # 7 Short offline Interrupted (host reset) 90% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Interrupted [80% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 40/47 Celsius Lifetime Min/Max Temperature: 14/60 Celsius Under/Over Temperature Limit Count: 0/0 Write SCT Data Table failed: scsi error medium or hardware error (serious) Read SCT Temperature History failed Write SCT (Get) Error Recovery Control Command failed: scsi error medium or hardware error (serious) SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific