/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7LN256HMJP-000H1 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: MAV01H3Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 7 21:58:58 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5100) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 9 Power_On_Hours -O--CK 100 100 000 - 2735 12 Power_Cycle_Count -O--CK 100 100 000 - 343 171 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 172 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 173 Wear_Leveling_Count -O--CK 099 099 005 - 8 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 131 176 Erase_Fail_Count_Chip -O---K 100 100 000 - 827 181 Program_Fail_Cnt_Total -O---K 099 095 000 - 281474976710655 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO-RCK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 034 054 000 - 34 (Min/Max 26/46) 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 CRC_Error_Count -O--CK 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 153303 242 Total_LBAs_Read -O--CK 100 100 000 - 63869 243 SATA_Downshift_Ct -O--CK 100 100 000 - 247315 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 1 Device Statistics Notification 0x0c GPL R/O 1 Pending Defects log 0x0d GPL,SL R/O 1 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x19 GPL R/O 8 LBA Status log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 1969 - # 2 Short offline Completed without error 00% 1968 - # 3 Short offline Completed without error 00% 1728 - # 4 Offline Completed without error 00% 1688 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: ?/45 Celsius Lifetime Min/Max Temperature: 23/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (51) Index Estimated Time Temperature Celsius 52 2023-03-07 00:40 33 ************** ... ..( 2 skipped). .. ************** 55 2023-03-07 01:10 33 ************** 56 2023-03-07 01:20 ? - 57 2023-03-07 01:30 ? - 58 2023-03-07 01:40 33 ************** 59 2023-03-07 01:50 32 ************* 60 2023-03-07 02:00 ? - 61 2023-03-07 02:10 ? - 62 2023-03-07 02:20 28 ********* 63 2023-03-07 02:30 30 *********** 64 2023-03-07 02:40 30 *********** 65 2023-03-07 02:50 31 ************ 66 2023-03-07 03:00 32 ************* 67 2023-03-07 03:10 33 ************** 68 2023-03-07 03:20 34 *************** 69 2023-03-07 03:30 34 *************** 70 2023-03-07 03:40 34 *************** 71 2023-03-07 03:50 33 ************** 72 2023-03-07 04:00 32 ************* 73 2023-03-07 04:10 31 ************ 74 2023-03-07 04:20 30 *********** ... ..( 23 skipped). .. *********** 98 2023-03-07 08:20 30 *********** 99 2023-03-07 08:30 31 ************ 100 2023-03-07 08:40 33 ************** 101 2023-03-07 08:50 34 *************** 102 2023-03-07 09:00 33 ************** 103 2023-03-07 09:10 33 ************** 104 2023-03-07 09:20 32 ************* 105 2023-03-07 09:30 32 ************* 106 2023-03-07 09:40 32 ************* 107 2023-03-07 09:50 33 ************** ... ..( 10 skipped). .. ************** 118 2023-03-07 11:40 33 ************** 119 2023-03-07 11:50 34 *************** ... ..( 5 skipped). .. *************** 125 2023-03-07 12:50 34 *************** 126 2023-03-07 13:00 35 **************** 127 2023-03-07 13:10 36 ***************** 0 2023-03-07 13:20 36 ***************** 1 2023-03-07 13:30 37 ****************** 2 2023-03-07 13:40 38 ******************* 3 2023-03-07 13:50 38 ******************* 4 2023-03-07 14:00 38 ******************* 5 2023-03-07 14:10 37 ****************** ... ..( 2 skipped). .. ****************** 8 2023-03-07 14:40 37 ****************** 9 2023-03-07 14:50 38 ******************* 10 2023-03-07 15:00 37 ****************** 11 2023-03-07 15:10 37 ****************** 12 2023-03-07 15:20 37 ****************** 13 2023-03-07 15:30 36 ***************** 14 2023-03-07 15:40 36 ***************** 15 2023-03-07 15:50 37 ****************** 16 2023-03-07 16:00 ? - 17 2023-03-07 16:10 ? - 18 2023-03-07 16:20 35 **************** 19 2023-03-07 16:30 39 ******************** 20 2023-03-07 16:40 41 ********************** 21 2023-03-07 16:50 43 ************************ 22 2023-03-07 17:00 44 ************************* 23 2023-03-07 17:10 45 ************************** ... ..( 3 skipped). .. ************************** 27 2023-03-07 17:50 45 ************************** 28 2023-03-07 18:00 44 ************************* 29 2023-03-07 18:10 42 *********************** 30 2023-03-07 18:20 40 ********************* 31 2023-03-07 18:30 40 ********************* 32 2023-03-07 18:40 40 ********************* 33 2023-03-07 18:50 42 *********************** 34 2023-03-07 19:00 34 *************** 35 2023-03-07 19:10 34 *************** 36 2023-03-07 19:20 33 ************** 37 2023-03-07 19:30 33 ************** 38 2023-03-07 19:40 33 ************** 39 2023-03-07 19:50 34 *************** 40 2023-03-07 20:00 33 ************** 41 2023-03-07 20:10 32 ************* ... ..( 2 skipped). .. ************* 44 2023-03-07 20:40 32 ************* 45 2023-03-07 20:50 33 ************** 46 2023-03-07 21:00 33 ************** 47 2023-03-07 21:10 34 *************** 48 2023-03-07 21:20 34 *************** 49 2023-03-07 21:30 34 *************** 50 2023-03-07 21:40 33 ************** 51 2023-03-07 21:50 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 343 -D- Lifetime Power-On Resets 0x01 0x010 4 2735 -D- Power-on Hours 0x01 0x018 6 5023433898 -D- Logical Sectors Written 0x01 0x020 6 58560183 -D- Number of Write Commands 0x01 0x028 6 2092886976 -D- Logical Sectors Read 0x01 0x030 6 18964127 -D- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 -D- Current Temperature 0x05 0x020 1 54 -D- Highest Temperature 0x05 0x028 1 23 -D- Lowest Temperature 0x05 0x058 1 55 -D- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 883 -D- Number of Hardware Resets 0x06 0x010 4 0 -D- Number of ASR Events 0x06 0x018 4 0 -D- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 ND- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD30EZRX-00D8PB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 3,000,559,428,096 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Mar 7 21:58:58 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (42300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 424) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 28 3 Spin_Up_Time POS--K 184 172 021 - 5783 4 Start_Stop_Count -O--CK 100 100 000 - 764 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2586 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 697 192 Power-Off_Retract_Count -O--CK 200 200 000 - 187 193 Load_Cycle_Count -O--CK 194 194 000 - 19345 194 Temperature_Celsius -O---K 117 099 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 7 198 Offline_Uncorrectable ----CK 200 200 000 - 5 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 7 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xcf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 26 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 26 [1] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 52 a8 40 00 Error: UNC 8 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:44.715 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:41.370 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 48 40 00 00:02:41.368 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 40 40 00 00:02:41.368 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 38 40 00 00:02:41.367 READ DMA EXT Error 25 [0] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 52 a8 40 00 Error: UNC 8 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:41.370 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 48 40 00 00:02:41.368 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 40 40 00 00:02:41.368 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 38 40 00 00:02:41.367 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 54 30 40 00 00:02:41.367 READ DMA EXT Error 24 [23] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 52 a8 40 00 Error: UNC 8 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:38.015 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:34.658 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a0 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 98 40 00 00:02:31.319 READ DMA EXT Error 23 [22] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 52 a8 40 00 Error: UNC 8 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:34.658 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a0 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 98 40 00 00:02:31.319 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 90 40 00 00:02:31.309 READ DMA EXT Error 22 [21] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 52 a8 40 00 Error: UNC 8 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 52 a8 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 a0 40 00 00:02:31.320 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 98 40 00 00:02:31.319 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 52 90 40 00 00:02:31.309 READ DMA EXT 25 00 d5 00 80 00 00 90 b3 52 d0 40 00 00:02:31.295 READ DMA EXT Error 21 [20] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 90 b3 52 a8 40 00 Error: UNC 64 sectors at LBA = 0x90b352a8 = 2427671208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 40 00 00 90 b3 52 90 40 00 00:01:59.640 READ DMA EXT 25 00 d5 00 80 00 00 90 b3 52 10 40 00 00:01:59.639 READ DMA EXT 25 00 d5 00 40 00 00 90 b3 51 d0 40 00 00:01:59.639 READ DMA EXT 25 00 d5 00 80 00 00 90 b3 51 50 40 00 00:01:59.639 READ DMA EXT 25 00 d5 00 80 00 00 90 b3 50 d0 40 00 00:01:59.637 READ DMA EXT Error 20 [19] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 90 b3 47 80 40 00 Error: UNC 8 sectors at LBA = 0x90b34780 = 2427668352 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 90 b3 47 80 40 00 00:01:53.803 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 47 78 40 00 00:01:53.803 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 47 70 40 00 00:01:53.803 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 47 68 40 00 00:01:53.802 READ DMA EXT 25 00 d5 00 08 00 00 90 b3 47 60 40 00 00:01:53.802 READ DMA EXT Error 19 [18] occurred at disk power-on lifetime: 2405 hours (100 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 90 b3 47 80 40 00 Error: UNC 256 sectors at LBA = 0x90b34780 = 2427668352 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 90 b3 47 50 40 00 00:01:21.435 READ DMA EXT 25 00 00 01 00 00 00 90 b3 46 50 40 00 00:01:21.434 READ DMA EXT 25 00 00 01 00 00 00 90 b3 45 50 40 00 00:01:21.433 READ DMA EXT 25 00 00 01 00 00 00 90 b3 44 50 40 00 00:01:21.432 READ DMA EXT 25 00 00 01 00 00 00 90 b3 43 50 40 00 00:01:21.431 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 21/39 Celsius Lifetime Min/Max Temperature: 15/51 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (420) Index Estimated Time Temperature Celsius 421 2023-03-07 14:01 33 ************** ... ..( 98 skipped). .. ************** 42 2023-03-07 15:40 33 ************** 43 2023-03-07 15:41 40 ********************* ... ..( 61 skipped). .. ********************* 105 2023-03-07 16:43 40 ********************* 106 2023-03-07 16:44 41 ********************** 107 2023-03-07 16:45 40 ********************* ... ..( 9 skipped). .. ********************* 117 2023-03-07 16:55 40 ********************* 118 2023-03-07 16:56 41 ********************** 119 2023-03-07 16:57 41 ********************** 120 2023-03-07 16:58 40 ********************* ... ..( 7 skipped). .. ********************* 128 2023-03-07 17:06 40 ********************* 129 2023-03-07 17:07 41 ********************** 130 2023-03-07 17:08 40 ********************* ... ..( 36 skipped). .. ********************* 167 2023-03-07 17:45 40 ********************* 168 2023-03-07 17:46 39 ******************** ... ..( 3 skipped). .. ******************** 172 2023-03-07 17:50 39 ******************** 173 2023-03-07 17:51 ? - 174 2023-03-07 17:52 20 * 175 2023-03-07 17:53 21 ** 176 2023-03-07 17:54 ? - 177 2023-03-07 17:55 21 ** 178 2023-03-07 17:56 21 ** 179 2023-03-07 17:57 22 *** 180 2023-03-07 17:58 22 *** 181 2023-03-07 17:59 23 **** 182 2023-03-07 18:00 23 **** 183 2023-03-07 18:01 24 ***** 184 2023-03-07 18:02 24 ***** 185 2023-03-07 18:03 24 ***** 186 2023-03-07 18:04 25 ****** 187 2023-03-07 18:05 26 ******* 188 2023-03-07 18:06 26 ******* 189 2023-03-07 18:07 27 ******** ... ..( 2 skipped). .. ******** 192 2023-03-07 18:10 27 ******** 193 2023-03-07 18:11 28 ********* ... ..( 3 skipped). .. ********* 197 2023-03-07 18:15 28 ********* 198 2023-03-07 18:16 29 ********** 199 2023-03-07 18:17 29 ********** 200 2023-03-07 18:18 29 ********** 201 2023-03-07 18:19 30 *********** 202 2023-03-07 18:20 30 *********** 203 2023-03-07 18:21 31 ************ 204 2023-03-07 18:22 31 ************ 205 2023-03-07 18:23 31 ************ 206 2023-03-07 18:24 32 ************* ... ..( 6 skipped). .. ************* 213 2023-03-07 18:31 32 ************* 214 2023-03-07 18:32 33 ************** ... ..( 2 skipped). .. ************** 217 2023-03-07 18:35 33 ************** 218 2023-03-07 18:36 34 *************** ... ..( 2 skipped). .. *************** 221 2023-03-07 18:39 34 *************** 222 2023-03-07 18:40 35 **************** ... ..( 4 skipped). .. **************** 227 2023-03-07 18:45 35 **************** 228 2023-03-07 18:46 36 ***************** ... ..( 8 skipped). .. ***************** 237 2023-03-07 18:55 36 ***************** 238 2023-03-07 18:56 37 ****************** ... ..( 18 skipped). .. ****************** 257 2023-03-07 19:15 37 ****************** 258 2023-03-07 19:16 38 ******************* 259 2023-03-07 19:17 37 ****************** 260 2023-03-07 19:18 37 ****************** 261 2023-03-07 19:19 37 ****************** 262 2023-03-07 19:20 38 ******************* ... ..( 22 skipped). .. ******************* 285 2023-03-07 19:43 38 ******************* 286 2023-03-07 19:44 39 ******************** ... ..( 27 skipped). .. ******************** 314 2023-03-07 20:12 39 ******************** 315 2023-03-07 20:13 38 ******************* ... ..( 4 skipped). .. ******************* 320 2023-03-07 20:18 38 ******************* 321 2023-03-07 20:19 37 ****************** ... ..( 14 skipped). .. ****************** 336 2023-03-07 20:34 37 ****************** 337 2023-03-07 20:35 36 ***************** ... ..( 10 skipped). .. ***************** 348 2023-03-07 20:46 36 ***************** 349 2023-03-07 20:47 35 **************** ... ..( 16 skipped). .. **************** 366 2023-03-07 21:04 35 **************** 367 2023-03-07 21:05 34 *************** ... ..( 51 skipped). .. *************** 419 2023-03-07 21:57 34 *************** 420 2023-03-07 21:58 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 20620 Vendor specific