/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-19-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO 500GB Serial Number: -- Firmware Version: 2B2QEXE7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 362,366,443,520 [362 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Tue Dec 20 16:35:43 2022 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.20W - - 0 0 0 0 0 0 1 + 4.30W - - 1 1 1 1 0 0 2 + 2.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 36 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 13,679,068 [7.00 TB] Data Units Written: 11,116,246 [5.69 TB] Host Read Commands: 290,158,740 Host Write Commands: 221,311,970 Controller Busy Time: 580 Power Cycles: 1,474 Power On Hours: 421 Unsafe Shutdowns: 82 Media and Data Integrity Errors: 7 Error Information Log Entries: 1,141 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 36 Celsius Temperature Sensor 2: 39 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-19-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD20SPZX-22UA7T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 20 16:35:43 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10740) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 200) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 222 219 021 - 1891 4 Start_Stop_Count -O--CK 099 099 000 - 1735 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1238 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 976 192 Power-Off_Retract_Count -O--CK 200 200 000 - 13 193 Load_Cycle_Count -O--CK 197 197 000 - 10553 194 Temperature_Celsius -O---K 122 099 000 - 25 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 76 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 20/25 Celsius Lifetime Min/Max Temperature: 18/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2022-12-20 14:28 21 ** 51 2022-12-20 14:29 21 ** 52 2022-12-20 14:30 22 *** 53 2022-12-20 14:31 22 *** 54 2022-12-20 14:32 22 *** 55 2022-12-20 14:33 23 **** 56 2022-12-20 14:34 23 **** 57 2022-12-20 14:35 24 ***** 58 2022-12-20 14:36 24 ***** 59 2022-12-20 14:37 24 ***** 60 2022-12-20 14:38 25 ****** 61 2022-12-20 14:39 26 ******* 62 2022-12-20 14:40 27 ******** 63 2022-12-20 14:41 28 ********* 64 2022-12-20 14:42 29 ********** 65 2022-12-20 14:43 30 *********** 66 2022-12-20 14:44 31 ************ 67 2022-12-20 14:45 32 ************* 68 2022-12-20 14:46 33 ************** 69 2022-12-20 14:47 34 *************** 70 2022-12-20 14:48 35 **************** 71 2022-12-20 14:49 33 ************** 72 2022-12-20 14:50 32 ************* 73 2022-12-20 14:51 32 ************* 74 2022-12-20 14:52 31 ************ ... ..( 3 skipped). .. ************ 78 2022-12-20 14:56 31 ************ 79 2022-12-20 14:57 30 *********** ... ..( 9 skipped). .. *********** 89 2022-12-20 15:07 30 *********** 90 2022-12-20 15:08 29 ********** ... ..( 3 skipped). .. ********** 94 2022-12-20 15:12 29 ********** 95 2022-12-20 15:13 28 ********* ... ..( 6 skipped). .. ********* 102 2022-12-20 15:20 28 ********* 103 2022-12-20 15:21 ? - 104 2022-12-20 15:22 20 * 105 2022-12-20 15:23 22 *** 106 2022-12-20 15:24 22 *** 107 2022-12-20 15:25 23 **** 108 2022-12-20 15:26 23 **** 109 2022-12-20 15:27 23 **** 110 2022-12-20 15:28 24 ***** 111 2022-12-20 15:29 24 ***** 112 2022-12-20 15:30 25 ****** 113 2022-12-20 15:31 25 ****** 114 2022-12-20 15:32 25 ****** 115 2022-12-20 15:33 26 ******* ... ..( 2 skipped). .. ******* 118 2022-12-20 15:36 26 ******* 119 2022-12-20 15:37 27 ******** ... ..( 4 skipped). .. ******** 124 2022-12-20 15:42 27 ******** 125 2022-12-20 15:43 28 ********* ... ..( 3 skipped). .. ********* 1 2022-12-20 15:47 28 ********* 2 2022-12-20 15:48 29 ********** ... ..( 11 skipped). .. ********** 14 2022-12-20 16:00 29 ********** 15 2022-12-20 16:01 30 *********** ... ..( 19 skipped). .. *********** 35 2022-12-20 16:21 30 *********** 36 2022-12-20 16:22 ? - 37 2022-12-20 16:23 20 * 38 2022-12-20 16:24 21 ** 39 2022-12-20 16:25 22 *** 40 2022-12-20 16:26 22 *** 41 2022-12-20 16:27 22 *** 42 2022-12-20 16:28 23 **** 43 2022-12-20 16:29 23 **** 44 2022-12-20 16:30 24 ***** 45 2022-12-20 16:31 24 ***** 46 2022-12-20 16:32 24 ***** 47 2022-12-20 16:33 25 ****** 48 2022-12-20 16:34 25 ****** 49 2022-12-20 16:35 25 ****** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 739 Vendor specific