/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-58-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST380815AS Serial Number: -- Firmware Version: 3.CHF User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Dec 30 15:47:44 2020 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0xffff (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 26) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time -O---- 097 097 000 - 0 4 Start_Stop_Count PO--CK 099 099 020 - 1958 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 4 7 Seek_Error_Rate POSR-- 088 060 030 - 767937623 9 Power_On_Hours -O--CK 056 056 000 - 38821 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count PO--CK 099 099 020 - 1976 184 End-to-End_Error PO--CK 100 253 097 - 0 187 Reported_Uncorrect -O-RCK 001 001 000 - 820 189 High_Fly_Writes -O---K 100 100 000 - 0 190 Airflow_Temperature_Cel -O-RC- 057 052 000 - 43 (Min/Max 27/44) 194 Temperature_Celsius ------ 043 048 000 - 43 (0 9 0 0 0) 195 Hardware_ECC_Recovered -O--CK 072 063 000 - 242821342 197 Current_Pending_Sector ------ 100 099 000 - 3 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 839 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 839 [18] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:24:22.545 READ DMA c8 00 00 00 a0 00 04 08 00 3b 00 e4 00 04:24:22.528 READ DMA c8 00 00 00 10 00 06 48 00 d7 80 e6 00 04:24:22.528 READ DMA c8 00 00 00 30 00 01 c7 00 d7 b8 e1 00 04:24:22.527 READ DMA c8 00 00 00 30 00 01 c7 00 d7 88 e1 00 04:24:22.526 READ DMA Error 838 [17] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:23:50.414 READ DMA ca 00 00 00 08 00 06 f5 00 14 20 e6 00 04:23:50.414 WRITE DMA ec 00 00 01 00 00 ff ff 00 ff ff a0 00 04:23:50.414 IDENTIFY DEVICE ef 00 03 00 45 00 ff ff 00 ff ff a0 00 04:23:50.414 SET FEATURES [Set transfer mode] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 04:23:50.413 IDENTIFY DEVICE Error 837 [16] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 98 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 90 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 88 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 80 e7 00 04:23:50.413 READ DMA Error 836 [15] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 40 be 24 be e0 00 Error: UNC at LBA = 0x140be24be = 5381170366 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 a0 00 01 40 00 24 60 e0 00 04:29:21.164 READ DMA EXT c8 00 00 00 60 00 01 3f 00 24 e0 e1 00 04:29:21.076 READ DMA c8 00 00 00 40 00 01 3f 00 24 80 e1 00 04:29:20.990 READ DMA c8 00 00 00 60 00 01 3f 00 24 00 e1 00 04:29:20.990 READ DMA c8 00 00 01 00 00 01 3e 00 24 00 e1 00 04:29:20.990 READ DMA Error 835 [14] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:24:22.545 READ DMA c8 00 00 00 a0 00 04 08 00 3b 00 e4 00 04:24:22.528 READ DMA c8 00 00 00 10 00 06 48 00 d7 80 e6 00 04:24:22.528 READ DMA c8 00 00 00 30 00 01 c7 00 d7 b8 e1 00 04:24:22.527 READ DMA c8 00 00 00 30 00 01 c7 00 d7 88 e1 00 04:24:22.526 READ DMA Error 834 [13] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:23:50.414 READ DMA ca 00 00 00 08 00 06 f5 00 14 20 e6 00 04:23:50.414 WRITE DMA ec 00 00 01 00 00 ff ff 00 ff ff a0 00 04:23:50.414 IDENTIFY DEVICE ef 00 03 00 45 00 ff ff 00 ff ff a0 00 04:23:50.414 SET FEATURES [Set transfer mode] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 04:23:50.413 IDENTIFY DEVICE Error 833 [12] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 07 ca a4 55 a4 e7 00 Error: UNC at LBA = 0x7cfa455a4 = 33548424612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 07 ca 00 55 a0 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 98 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 90 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 88 e7 00 04:23:50.414 READ DMA c8 00 00 00 08 00 07 ca 00 55 80 e7 00 04:23:50.413 READ DMA Error 832 [11] occurred at disk power-on lifetime: 38540 hours (1605 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 40 be 24 be e0 00 Error: UNC at LBA = 0x140be24be = 5381170366 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 a0 00 01 40 00 24 60 e0 00 04:29:21.164 READ DMA EXT c8 00 00 00 60 00 01 3f 00 24 e0 e1 00 04:29:21.076 READ DMA c8 00 00 00 40 00 01 3f 00 24 80 e1 00 04:29:20.990 READ DMA c8 00 00 00 60 00 01 3f 00 24 00 e1 00 04:29:20.990 READ DMA c8 00 00 01 00 00 01 3e 00 24 00 e1 00 04:29:20.990 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 36577 - # 2 Short offline Completed without error 00% 36577 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 521 (0x0209) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: --/44 Celsius Lifetime Min/Max Temperature: --/48 Celsius Another SCT command is executing, abort Read Data Table (SCT ext_status_code 0xffff, action_code=4, function_code=2) Read SCT Temperature History failed SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-58-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Generic S050 Hard drive Serial Number: -- Firmware Version: MS1OA7M0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Dec 30 15:47:44 2020 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3523) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 59) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 69 3 Spin_Up_Time POS--- 121 121 024 - 194 (Average 186) 4 Start_Stop_Count -O--C- 099 099 000 - 4757 5 Reallocated_Sector_Ct PO--CK 084 084 005 - 183 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 110 110 020 - 36 9 Power_On_Hours -O--C- 100 100 000 - 5901 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4704 192 Power-Off_Retract_Count -O--CK 090 090 000 - 13006 193 Load_Cycle_Count -O--C- 090 090 000 - 13006 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 18/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 184 197 Current_Pending_Sector -O---K 001 001 000 - 2304 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 33964 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 33964 [3] occurred at disk power-on lifetime: 4573 hours (190 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 28 2e e3 d0 08 00 Error: WP at LBA = 0x282ee3d0 = 674161616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 e0 00 00 09 78 f8 a0 40 00 01:23:05.126 WRITE FPDMA QUEUED 61 00 08 00 d8 00 00 04 4d a4 48 40 00 01:23:05.126 WRITE FPDMA QUEUED 61 00 08 00 d0 00 00 04 4e 7b e8 40 00 01:23:05.126 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 11 4c e0 40 00 01:23:05.126 WRITE FPDMA QUEUED 61 00 40 00 c0 00 00 06 6d f0 30 40 00 01:23:05.126 WRITE FPDMA QUEUED Error 33963 [2] occurred at disk power-on lifetime: 4573 hours (190 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 28 2e e3 d0 08 00 Error: UNC at LBA = 0x282ee3d0 = 674161616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 90 00 00 0a ef 91 98 40 00 01:23:01.191 READ FPDMA QUEUED 60 00 20 00 88 00 00 00 2a 2c be 40 00 01:23:01.187 READ FPDMA QUEUED 60 00 80 00 80 00 00 06 a7 31 f0 40 00 01:23:01.168 READ FPDMA QUEUED 60 00 78 00 78 00 00 06 6e 30 00 40 00 01:23:01.168 READ FPDMA QUEUED 60 00 08 00 70 00 00 06 75 08 88 40 00 01:23:01.168 READ FPDMA QUEUED Error 33962 [1] occurred at disk power-on lifetime: 4573 hours (190 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 28 2e e3 d0 08 00 Error: WP at LBA = 0x282ee3d0 = 674161616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 70 00 00 04 cf d3 50 40 00 01:22:56.420 WRITE FPDMA QUEUED 60 00 80 00 68 00 00 0a ee 35 68 40 00 01:22:56.420 READ FPDMA QUEUED 61 00 08 00 60 00 00 04 cf e2 50 40 00 01:22:56.419 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 04 4d a4 48 40 00 01:22:56.419 WRITE FPDMA QUEUED 60 00 08 00 50 00 00 00 6a e9 30 40 00 01:22:56.419 READ FPDMA QUEUED Error 33961 [0] occurred at disk power-on lifetime: 4573 hours (190 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 28 2e e3 d0 08 00 Error: UNC at LBA = 0x282ee3d0 = 674161616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 f8 00 00 07 29 20 18 40 00 01:22:52.416 READ FPDMA QUEUED 60 00 80 00 f0 00 00 07 26 13 b8 40 00 01:22:52.416 READ FPDMA QUEUED 61 00 40 00 e8 00 00 09 56 45 d0 40 00 01:22:52.407 WRITE FPDMA QUEUED 61 00 40 00 e0 00 00 09 56 45 90 40 00 01:22:52.406 WRITE FPDMA QUEUED 61 00 40 00 d8 00 00 09 56 45 10 40 00 01:22:52.406 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 28/41 Celsius Lifetime Min/Max Temperature: 18/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (62) Index Estimated Time Temperature Celsius 63 2020-12-30 13:40 40 ********************* ... ..( 6 skipped). .. ********************* 70 2020-12-30 13:47 40 ********************* 71 2020-12-30 13:48 39 ******************** 72 2020-12-30 13:49 40 ********************* ... ..( 36 skipped). .. ********************* 109 2020-12-30 14:26 40 ********************* 110 2020-12-30 14:27 41 ********************** 111 2020-12-30 14:28 40 ********************* 112 2020-12-30 14:29 40 ********************* 113 2020-12-30 14:30 40 ********************* 114 2020-12-30 14:31 41 ********************** 115 2020-12-30 14:32 40 ********************* 116 2020-12-30 14:33 40 ********************* 117 2020-12-30 14:34 40 ********************* 118 2020-12-30 14:35 41 ********************** 119 2020-12-30 14:36 40 ********************* ... ..( 62 skipped). .. ********************* 54 2020-12-30 15:39 40 ********************* 55 2020-12-30 15:40 39 ******************** 56 2020-12-30 15:41 40 ********************* 57 2020-12-30 15:42 39 ******************** 58 2020-12-30 15:43 39 ******************** 59 2020-12-30 15:44 39 ******************** 60 2020-12-30 15:45 40 ********************* 61 2020-12-30 15:46 39 ******************** 62 2020-12-30 15:47 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 4704 --- Lifetime Power-On Resets 0x01 0x010 4 5901 --- Power-on Hours 0x01 0x018 6 11640773420 --- Logical Sectors Written 0x01 0x020 6 112412601 --- Number of Write Commands 0x01 0x028 6 298646862326 --- Logical Sectors Read 0x01 0x030 6 3911667408 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 5496 --- Spindle Motor Power-on Hours 0x03 0x010 4 5495 --- Head Flying Hours 0x03 0x018 4 13006 --- Head Load Events 0x03 0x020 4 183 --- Number of Reallocated Logical Sectors 0x03 0x028 4 18398 --- Read Recovery Attempts 0x03 0x030 4 9 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 17917 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x010 1 38 N-- Average Short Term Temperature 0x05 0x018 1 36 N-- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 44 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 43 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 28880 --- Number of Hardware Resets 0x06 0x010 4 5332 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS