Probe #13f8e82e6a of MSI B150M PRO-VDH Desktop Computer (MS-7982)

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD20EZRZ-00Z5HB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 8 17:09:47 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (26160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 8486 3 Spin_Up_Time POS--K 180 173 021 - 3983 4 Start_Stop_Count -O--CK 100 100 000 - 952 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 050 050 000 - 36739 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 899 192 Power-Off_Retract_Count -O--CK 200 200 000 - 624 193 Load_Cycle_Count -O--CK 001 001 000 - 1404492 194 Temperature_Celsius -O---K 120 101 000 - 27 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 194 000 - 32 198 Offline_Uncorrectable ----CK 200 194 000 - 42 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 128 000 - 274 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 906 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 906 [17] occurred at disk power-on lifetime: 36735 hours (1530 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 77 f3 a0 40 00 Error: WP at LBA = 0x0177f3a0 = 24638368 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 08 00 00 d0 00 00 04 bd 70 00 40 08 2d+17:24:48.836 WRITE FPDMA QUEUED 61 07 00 00 c8 00 00 04 bd 68 80 40 08 2d+17:24:48.836 WRITE FPDMA QUEUED 60 02 b0 00 c0 00 00 01 77 f1 50 40 08 2d+17:24:48.836 READ FPDMA QUEUED 60 05 50 00 b8 00 00 01 77 ec 00 40 08 2d+17:24:48.836 READ FPDMA QUEUED 60 04 00 00 b0 00 00 01 77 e8 00 40 08 2d+17:24:48.833 READ FPDMA QUEUED Error 905 [16] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 12 50 40 00 Error: WP at LBA = 0x01781250 = 24646224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 48 00 00 ac 50 13 88 40 08 2d+04:02:44.156 WRITE FPDMA QUEUED 61 05 40 00 40 00 00 ac 50 0e 48 40 08 2d+04:02:44.153 WRITE FPDMA QUEUED 61 05 40 00 38 00 00 ac 50 09 08 40 08 2d+04:02:44.151 WRITE FPDMA QUEUED 61 05 30 00 28 00 00 ac 10 12 60 40 08 2d+04:02:44.149 WRITE FPDMA QUEUED 61 05 40 00 18 00 00 ac 10 0d 20 40 08 2d+04:02:44.147 WRITE FPDMA QUEUED Error 904 [15] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 12 50 40 00 Error: WP at LBA = 0x01781250 = 24646224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 88 00 00 a8 90 10 f8 40 08 2d+04:02:40.613 WRITE FPDMA QUEUED 61 00 08 00 80 00 00 a8 50 14 d8 40 08 2d+04:02:40.613 WRITE FPDMA QUEUED 61 00 08 00 78 00 00 a7 d0 0d 40 40 08 2d+04:02:40.613 WRITE FPDMA QUEUED 61 00 08 00 c0 00 00 a7 90 0d 48 40 08 2d+04:02:40.613 WRITE FPDMA QUEUED 61 00 08 00 b8 00 00 a7 50 0f b8 40 08 2d+04:02:40.613 WRITE FPDMA QUEUED Error 903 [14] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 08 30 40 00 Error: UNC at LBA = 0x01780830 = 24643632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 01 78 08 30 40 08 2d+04:02:34.967 READ FPDMA QUEUED 61 05 40 00 90 00 00 74 67 91 38 40 08 2d+04:02:34.965 WRITE FPDMA QUEUED 61 04 e8 00 88 00 00 74 67 96 78 40 08 2d+04:02:34.965 WRITE FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+04:02:34.965 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+04:02:34.965 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 902 [13] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 08 30 40 00 Error: UNC at LBA = 0x01780830 = 24643632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 60 00 00 01 78 08 30 40 08 2d+04:02:31.428 READ FPDMA QUEUED 60 00 08 00 58 00 00 ac 91 0c b8 40 08 2d+04:02:31.332 READ FPDMA QUEUED 60 00 08 00 50 00 00 ac 91 0c b0 40 08 2d+04:02:31.332 READ FPDMA QUEUED 60 00 08 00 48 00 00 ac 91 0c a8 40 08 2d+04:02:31.332 READ FPDMA QUEUED 60 00 08 00 40 00 00 ac 91 0c a0 40 08 2d+04:02:31.331 READ FPDMA QUEUED Error 901 [12] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 12 50 40 00 Error: WP at LBA = 0x01781250 = 24646224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 80 00 00 ba 90 0e b0 40 08 2d+04:02:03.264 WRITE FPDMA QUEUED 61 00 08 00 78 00 00 ba 90 0e 88 40 08 2d+04:02:03.264 WRITE FPDMA QUEUED 61 00 90 00 b8 00 00 74 67 78 28 40 08 2d+04:02:03.264 WRITE FPDMA QUEUED 61 00 10 00 70 00 00 ba 90 0e 48 40 08 2d+04:02:03.264 WRITE FPDMA QUEUED 61 00 10 00 68 00 00 ba 90 0e 20 40 08 2d+04:02:03.263 WRITE FPDMA QUEUED Error 900 [11] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 12 50 40 00 Error: WP at LBA = 0x01781250 = 24646224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 50 00 00 ba 90 0b d0 40 08 2d+04:01:59.586 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 ba 90 0b a8 40 08 2d+04:01:59.586 WRITE FPDMA QUEUED 61 00 10 00 40 00 00 ba 90 0b 68 40 08 2d+04:01:59.586 WRITE FPDMA QUEUED 61 00 18 00 38 00 00 ba 90 0b 38 40 08 2d+04:01:59.586 WRITE FPDMA QUEUED 61 00 18 00 30 00 00 ba 90 0b 10 40 08 2d+04:01:59.586 WRITE FPDMA QUEUED Error 899 [10] occurred at disk power-on lifetime: 36721 hours (1530 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 01 78 0f 38 40 00 Error: WP at LBA = 0x01780f38 = 24645432 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 58 00 68 00 00 b8 d1 1b d8 40 08 2d+04:01:55.114 WRITE FPDMA QUEUED 61 00 10 00 60 00 00 b8 d0 0c 08 40 08 2d+04:01:55.114 WRITE FPDMA QUEUED 61 00 08 00 90 00 00 3d 55 46 70 40 08 2d+04:01:55.114 WRITE FPDMA QUEUED 61 01 30 00 58 00 00 b8 d0 0a 88 40 08 2d+04:01:55.110 WRITE FPDMA QUEUED 60 00 08 00 e0 00 00 01 78 0f 38 40 08 2d+04:01:55.109 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 36739 11350584 # 2 Short offline Completed: read failure 90% 32510 892654 # 3 Short offline Aborted by host 60% 13336 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 25/27 Celsius Lifetime Min/Max Temperature: 14/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (60) Index Estimated Time Temperature Celsius 61 2021-10-08 09:12 28 ********* ... ..( 22 skipped). .. ********* 84 2021-10-08 09:35 28 ********* 85 2021-10-08 09:36 27 ******** 86 2021-10-08 09:37 28 ********* ... ..( 2 skipped). .. ********* 89 2021-10-08 09:40 28 ********* 90 2021-10-08 09:41 27 ******** 91 2021-10-08 09:42 28 ********* 92 2021-10-08 09:43 27 ******** 93 2021-10-08 09:44 27 ******** 94 2021-10-08 09:45 28 ********* 95 2021-10-08 09:46 27 ******** 96 2021-10-08 09:47 28 ********* ... ..( 3 skipped). .. ********* 100 2021-10-08 09:51 28 ********* 101 2021-10-08 09:52 27 ******** 102 2021-10-08 09:53 28 ********* ... ..( 2 skipped). .. ********* 105 2021-10-08 09:56 28 ********* 106 2021-10-08 09:57 27 ******** 107 2021-10-08 09:58 28 ********* 108 2021-10-08 09:59 28 ********* 109 2021-10-08 10:00 28 ********* 110 2021-10-08 10:01 27 ******** 111 2021-10-08 10:02 27 ******** 112 2021-10-08 10:03 28 ********* ... ..( 3 skipped). .. ********* 116 2021-10-08 10:07 28 ********* 117 2021-10-08 10:08 27 ******** 118 2021-10-08 10:09 28 ********* ... ..( 46 skipped). .. ********* 165 2021-10-08 10:56 28 ********* 166 2021-10-08 10:57 27 ******** 167 2021-10-08 10:58 28 ********* 168 2021-10-08 10:59 27 ******** 169 2021-10-08 11:00 28 ********* 170 2021-10-08 11:01 28 ********* 171 2021-10-08 11:02 28 ********* 172 2021-10-08 11:03 27 ******** 173 2021-10-08 11:04 28 ********* 174 2021-10-08 11:05 28 ********* 175 2021-10-08 11:06 27 ******** 176 2021-10-08 11:07 28 ********* ... ..( 40 skipped). .. ********* 217 2021-10-08 11:48 28 ********* 218 2021-10-08 11:49 27 ******** 219 2021-10-08 11:50 28 ********* ... ..( 13 skipped). .. ********* 233 2021-10-08 12:04 28 ********* 234 2021-10-08 12:05 27 ******** 235 2021-10-08 12:06 28 ********* 236 2021-10-08 12:07 27 ******** 237 2021-10-08 12:08 28 ********* 238 2021-10-08 12:09 27 ******** 239 2021-10-08 12:10 28 ********* ... ..( 3 skipped). .. ********* 243 2021-10-08 12:14 28 ********* 244 2021-10-08 12:15 ? - 245 2021-10-08 12:16 25 ****** 246 2021-10-08 12:17 25 ****** 247 2021-10-08 12:18 26 ******* ... ..( 5 skipped). .. ******* 253 2021-10-08 12:24 26 ******* 254 2021-10-08 12:25 27 ******** ... ..( 8 skipped). .. ******** 263 2021-10-08 12:34 27 ******** 264 2021-10-08 12:35 26 ******* 265 2021-10-08 12:36 27 ******** ... ..( 9 skipped). .. ******** 275 2021-10-08 12:46 27 ******** 276 2021-10-08 12:47 26 ******* 277 2021-10-08 12:48 28 ********* ... ..(164 skipped). .. ********* 442 2021-10-08 15:33 28 ********* 443 2021-10-08 15:34 27 ******** ... ..( 20 skipped). .. ******** 464 2021-10-08 15:55 27 ******** 465 2021-10-08 15:56 28 ********* ... ..( 72 skipped). .. ********* 60 2021-10-08 17:09 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1883 Vendor specific


Hardware for Linux and BSD

GitHub