/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-001CA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 15.01H15 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Oct 21 12:04:54 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 88) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 137 135 021 - 4116 4 Start_Stop_Count -O--CK 095 095 000 - 5789 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 053 053 000 - 34850 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5763 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1116 193 Load_Cycle_Count -O--CK 199 199 000 - 4672 194 Temperature_Celsius -O---K 112 095 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/31 Celsius Lifetime Min/Max Temperature: 30/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (127) Index Estimated Time Temperature Celsius 128 2020-10-21 04:07 30 *********** ... ..( 6 skipped). .. *********** 135 2020-10-21 04:14 30 *********** 136 2020-10-21 04:15 31 ************ 137 2020-10-21 04:16 30 *********** ... ..( 52 skipped). .. *********** 190 2020-10-21 05:09 30 *********** 191 2020-10-21 05:10 31 ************ 192 2020-10-21 05:11 31 ************ 193 2020-10-21 05:12 30 *********** 194 2020-10-21 05:13 30 *********** 195 2020-10-21 05:14 30 *********** 196 2020-10-21 05:15 31 ************ 197 2020-10-21 05:16 30 *********** 198 2020-10-21 05:17 30 *********** 199 2020-10-21 05:18 30 *********** 200 2020-10-21 05:19 31 ************ 201 2020-10-21 05:20 31 ************ 202 2020-10-21 05:21 30 *********** 203 2020-10-21 05:22 30 *********** 204 2020-10-21 05:23 31 ************ 205 2020-10-21 05:24 30 *********** ... ..( 2 skipped). .. *********** 208 2020-10-21 05:27 30 *********** 209 2020-10-21 05:28 31 ************ 210 2020-10-21 05:29 31 ************ 211 2020-10-21 05:30 31 ************ 212 2020-10-21 05:31 30 *********** 213 2020-10-21 05:32 31 ************ ... ..( 3 skipped). .. ************ 217 2020-10-21 05:36 31 ************ 218 2020-10-21 05:37 ? - 219 2020-10-21 05:38 31 ************ 220 2020-10-21 05:39 31 ************ 221 2020-10-21 05:40 ? - 222 2020-10-21 05:41 31 ************ ... ..( 2 skipped). .. ************ 225 2020-10-21 05:44 31 ************ 226 2020-10-21 05:45 30 *********** 227 2020-10-21 05:46 31 ************ 228 2020-10-21 05:47 30 *********** 229 2020-10-21 05:48 31 ************ 230 2020-10-21 05:49 31 ************ 231 2020-10-21 05:50 30 *********** 232 2020-10-21 05:51 30 *********** 233 2020-10-21 05:52 30 *********** 234 2020-10-21 05:53 31 ************ 235 2020-10-21 05:54 30 *********** ... ..( 3 skipped). .. *********** 239 2020-10-21 05:58 30 *********** 240 2020-10-21 05:59 31 ************ ... ..( 2 skipped). .. ************ 243 2020-10-21 06:02 31 ************ 244 2020-10-21 06:03 30 *********** 245 2020-10-21 06:04 30 *********** 246 2020-10-21 06:05 30 *********** 247 2020-10-21 06:06 31 ************ 248 2020-10-21 06:07 30 *********** ... ..( 21 skipped). .. *********** 270 2020-10-21 06:29 30 *********** 271 2020-10-21 06:30 ? - 272 2020-10-21 06:31 31 ************ 273 2020-10-21 06:32 30 *********** ... ..( 5 skipped). .. *********** 279 2020-10-21 06:38 30 *********** 280 2020-10-21 06:39 ? - 281 2020-10-21 06:40 31 ************ 282 2020-10-21 06:41 ? - 283 2020-10-21 06:42 31 ************ 284 2020-10-21 06:43 30 *********** ... ..( 3 skipped). .. *********** 288 2020-10-21 06:47 30 *********** 289 2020-10-21 06:48 31 ************ ... ..( 3 skipped). .. ************ 293 2020-10-21 06:52 31 ************ 294 2020-10-21 06:53 30 *********** ... ..( 62 skipped). .. *********** 357 2020-10-21 07:56 30 *********** 358 2020-10-21 07:57 31 ************ 359 2020-10-21 07:58 30 *********** 360 2020-10-21 07:59 30 *********** 361 2020-10-21 08:00 31 ************ 362 2020-10-21 08:01 30 *********** ... ..(177 skipped). .. *********** 62 2020-10-21 10:59 30 *********** 63 2020-10-21 11:00 31 ************ 64 2020-10-21 11:01 30 *********** ... ..( 57 skipped). .. *********** 122 2020-10-21 11:59 30 *********** 123 2020-10-21 12:00 31 ************ 124 2020-10-21 12:01 31 ************ 125 2020-10-21 12:02 30 *********** 126 2020-10-21 12:03 30 *********** 127 2020-10-21 12:04 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 710 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD20EARS-14MVWB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5000 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 21 12:04:54 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (37080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 358) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 222 167 021 - 3900 4 Start_Stop_Count -O--CK 094 094 000 - 6292 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 049 049 000 - 37569 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6291 192 Power-Off_Retract_Count -O--CK 197 197 000 - 2257 193 Load_Cycle_Count -O--CK 199 199 000 - 4034 194 Temperature_Celsius -O---K 109 100 000 - 41 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xb8 GPL,SL VS 4 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 41/41 Celsius Lifetime Min/Max Temperature: 19/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (180) Index Estimated Time Temperature Celsius 181 2020-10-21 04:07 40 ********************* ... ..(184 skipped). .. ********************* 366 2020-10-21 07:12 40 ********************* 367 2020-10-21 07:13 ? - 368 2020-10-21 07:14 41 ********************** 369 2020-10-21 07:15 41 ********************** 370 2020-10-21 07:16 ? - 371 2020-10-21 07:17 41 ********************** ... ..( 4 skipped). .. ********************** 376 2020-10-21 07:22 41 ********************** 377 2020-10-21 07:23 40 ********************* ... ..( 42 skipped). .. ********************* 420 2020-10-21 08:06 40 ********************* 421 2020-10-21 08:07 ? - 422 2020-10-21 08:08 41 ********************** ... ..( 7 skipped). .. ********************** 430 2020-10-21 08:16 41 ********************** 431 2020-10-21 08:17 ? - 432 2020-10-21 08:18 41 ********************** 433 2020-10-21 08:19 41 ********************** 434 2020-10-21 08:20 ? - 435 2020-10-21 08:21 41 ********************** ... ..( 10 skipped). .. ********************** 446 2020-10-21 08:32 41 ********************** 447 2020-10-21 08:33 40 ********************* ... ..(210 skipped). .. ********************* 180 2020-10-21 12:04 40 ********************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 714 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB) Device Model: WDC WD5000BMVW-11AMCS0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 21 12:04:54 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error unsupported field in scsi command Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error unsupported field in scsi command SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13260) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 132) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 157 152 021 - 3150 4 Start_Stop_Count -O--CK 092 092 000 - 8440 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 082 082 000 - 13778 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4633 192 Power-Off_Retract_Count -O--CK 199 199 000 - 893 193 Load_Cycle_Count -O--CK 185 185 000 - 46933 194 Temperature_Celsius -O---K 112 094 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 4076 hours (169 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 22 58 e8 e0 40 00 Error: UNC 256 sectors at LBA = 0x2258e8e0 = 576252128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 22 58 e8 00 40 00 01:55:20.798 READ DMA EXT e1 00 00 00 01 00 00 00 00 00 00 00 00 01:55:20.506 IDLE IMMEDIATE ec 00 00 00 01 00 00 00 00 00 00 00 00 01:55:20.502 IDENTIFY DEVICE 25 00 00 01 00 00 00 22 58 e8 00 40 00 01:54:14.209 READ DMA EXT 25 00 00 01 00 00 00 22 58 e7 00 40 00 01:54:14.205 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 4076 hours (169 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 22 58 e8 e0 40 00 Error: UNC 256 sectors at LBA = 0x2258e8e0 = 576252128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 22 58 e8 00 40 00 01:54:14.209 READ DMA EXT 25 00 00 01 00 00 00 22 58 e7 00 40 00 01:54:14.205 READ DMA EXT 25 00 00 01 00 00 00 22 58 e6 00 40 00 01:54:14.200 READ DMA EXT 25 00 00 01 00 00 00 22 58 e5 00 40 00 01:54:14.195 READ DMA EXT 25 00 00 01 00 00 00 22 58 e4 00 40 00 01:54:14.189 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3054 - # 2 Short offline Completed without error 00% 2826 - # 3 Short offline Completed without error 00% 2142 - # 4 Short offline Completed without error 00% 1924 - # 5 Short offline Completed without error 00% 1410 - # 6 Short offline Completed without error 00% 1136 - # 7 Short offline Completed without error 00% 876 - # 8 Short offline Completed without error 00% 727 - # 9 Short offline Completed without error 00% 668 - #10 Short offline Completed without error 00% 532 - #11 Short offline Completed without error 00% 384 - #12 Short offline Completed without error 00% 319 - #13 Short offline Completed without error 00% 255 - #14 Short offline Completed without error 00% 170 - #15 Short offline Completed without error 00% 169 - #16 Short offline Completed without error 00% 146 - #17 Short offline Completed without error 00% 135 - #18 Short offline Completed without error 00% 78 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 27/36 Celsius Lifetime Min/Max Temperature: 19/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2020-10-21 09:57 27 ******** 77 2020-10-21 09:58 28 ********* ... ..( 4 skipped). .. ********* 82 2020-10-21 10:03 28 ********* 83 2020-10-21 10:04 27 ******** 84 2020-10-21 10:05 28 ********* 85 2020-10-21 10:06 28 ********* 86 2020-10-21 10:07 28 ********* 87 2020-10-21 10:08 27 ******** 88 2020-10-21 10:09 28 ********* 89 2020-10-21 10:10 28 ********* 90 2020-10-21 10:11 27 ******** 91 2020-10-21 10:12 28 ********* ... ..( 3 skipped). .. ********* 95 2020-10-21 10:16 28 ********* 96 2020-10-21 10:17 27 ******** 97 2020-10-21 10:18 28 ********* ... ..( 27 skipped). .. ********* 125 2020-10-21 10:46 28 ********* 126 2020-10-21 10:47 ? - 127 2020-10-21 10:48 28 ********* 0 2020-10-21 10:49 28 ********* 1 2020-10-21 10:50 ? - 2 2020-10-21 10:51 28 ********* 3 2020-10-21 10:52 28 ********* 4 2020-10-21 10:53 28 ********* 5 2020-10-21 10:54 29 ********** 6 2020-10-21 10:55 29 ********** 7 2020-10-21 10:56 29 ********** 8 2020-10-21 10:57 30 *********** ... ..( 4 skipped). .. *********** 13 2020-10-21 11:02 30 *********** 14 2020-10-21 11:03 31 ************ ... ..( 7 skipped). .. ************ 22 2020-10-21 11:11 31 ************ 23 2020-10-21 11:12 32 ************* 24 2020-10-21 11:13 31 ************ 25 2020-10-21 11:14 31 ************ 26 2020-10-21 11:15 31 ************ 27 2020-10-21 11:16 32 ************* ... ..( 4 skipped). .. ************* 32 2020-10-21 11:21 32 ************* 33 2020-10-21 11:22 33 ************** 34 2020-10-21 11:23 32 ************* 35 2020-10-21 11:24 32 ************* 36 2020-10-21 11:25 33 ************** 37 2020-10-21 11:26 32 ************* 38 2020-10-21 11:27 33 ************** ... ..( 11 skipped). .. ************** 50 2020-10-21 11:39 33 ************** 51 2020-10-21 11:40 ? - 52 2020-10-21 11:41 32 ************* 53 2020-10-21 11:42 ? - 54 2020-10-21 11:43 33 ************** 55 2020-10-21 11:44 33 ************** 56 2020-10-21 11:45 33 ************** 57 2020-10-21 11:46 34 *************** 58 2020-10-21 11:47 33 ************** 59 2020-10-21 11:48 34 *************** 60 2020-10-21 11:49 34 *************** 61 2020-10-21 11:50 33 ************** 62 2020-10-21 11:51 ? - 63 2020-10-21 11:52 33 ************** 64 2020-10-21 11:53 ? - 65 2020-10-21 11:54 34 *************** 66 2020-10-21 11:55 34 *************** 67 2020-10-21 11:56 35 **************** 68 2020-10-21 11:57 34 *************** ... ..( 4 skipped). .. *************** 73 2020-10-21 12:02 34 *************** 74 2020-10-21 12:03 35 **************** 75 2020-10-21 12:04 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 456 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 64081 Vendor specific