/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: JUHOR J800 1TB M.2 NVME Serial Number: -- Firmware Version: SVN9177 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 1,024,209,543,168 [1.02 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 000000 ... Local Time is: Wed Mar 6 23:02:18 2024 MSK Firmware Updates (0x1a): 5 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 90 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.7460W - - 3 3 3 3 5000 10000 4 - 0.7260W - - 4 4 4 4 8000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 41 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 0% Data Units Read: 13,491,264 [6.90 TB] Data Units Written: 13,355,222 [6.83 TB] Host Read Commands: 50,460,902 Host Write Commands: 40,315,403 Controller Busy Time: 380 Power Cycles: 522 Power On Hours: 3,330 Unsafe Shutdowns: 43 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,143 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 41 Celsius Temperature Sensor 2: 47 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 1143 0 0x0000 0x2002 0x000 0 0 - Invalid Command Opcode Read Self-test Log failed: Invalid Field in Command (0x2002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: JUHOR Z500 512GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: FW200326 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 23:02:18 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 7502 12 Power_Cycle_Count -O--CK 100 100 050 - 964 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 0 163 Unknown_Attribute -O--CK 100 100 050 - 482 164 Unknown_Attribute -O--CK 100 100 050 - 389462 165 Unknown_Attribute -O--CK 100 100 050 - 104 166 Unknown_Attribute -O--CK 100 100 050 - 42 167 Unknown_Attribute -O--CK 100 100 050 - 73 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 0 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 83886081 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 252531 177 Wear_Leveling_Count -O--CK 100 100 050 - 1774937 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 46 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 0 241 Total_LBAs_Written -O--CK 100 100 050 - 231569 242 Total_LBAs_Read -O--CK 100 100 050 - 186256 249 Unknown_Attribute -O--CK 100 100 050 - 258322 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 21 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 21 [0] occurred at disk power-on lifetime: 7501 hours (312 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 c8 00 00 60 00 68 80 00 00 at LBA = 0x60006880 = 1610639488 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c8 00 00 60 00 68 80 40 00 03:37:25.790 READ FPDMA QUEUED 60 00 08 00 c0 00 00 71 00 65 50 40 00 03:37:25.790 READ FPDMA QUEUED 60 00 08 00 b8 00 00 79 00 66 d8 40 00 03:37:25.790 READ FPDMA QUEUED 60 00 08 00 b0 00 00 73 00 65 48 40 00 03:37:25.790 READ FPDMA QUEUED 60 00 08 00 a8 00 00 15 00 6b 50 40 00 03:37:25.790 READ FPDMA QUEUED Error 20 [3] occurred at disk power-on lifetime: 7500 hours (312 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 e0 00 09 51 00 76 c0 00 00 at LBA = 0x9510076c0 = 40013690560 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e0 00 09 51 00 76 c0 40 00 03:17:37.750 READ FPDMA QUEUED 60 01 00 00 d8 00 09 50 00 76 c0 40 00 03:17:37.750 READ FPDMA QUEUED 60 01 00 00 d0 00 09 4f 00 76 c0 40 00 03:17:37.750 READ FPDMA QUEUED 60 00 40 00 c8 00 16 f8 00 04 e8 40 00 03:17:37.750 READ FPDMA QUEUED 60 01 00 00 c0 00 09 4e 00 76 c0 40 00 03:17:37.750 READ FPDMA QUEUED Error 19 [2] occurred at disk power-on lifetime: 7500 hours (312 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 20 00 28 c8 00 02 a8 00 00 at LBA = 0x28c80002a8 = 175154135720 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 28 c8 00 02 a8 40 00 03:17:32.550 READ FPDMA QUEUED 60 01 00 00 18 00 28 c7 00 02 a8 40 00 03:17:32.550 READ FPDMA QUEUED 60 01 00 00 10 00 28 c6 00 02 a8 40 00 03:17:32.550 READ FPDMA QUEUED 60 01 00 00 08 00 28 c5 00 02 a8 40 00 03:17:32.550 READ FPDMA QUEUED 60 01 00 00 f8 00 28 c4 00 02 a8 40 00 03:17:32.550 READ FPDMA QUEUED Error 18 [1] occurred at disk power-on lifetime: 7500 hours (312 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 c8 00 25 09 00 58 28 00 00 at LBA = 0x2509005828 = 159064807464 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 c8 00 25 09 00 58 28 40 00 03:12:15.130 READ FPDMA QUEUED 60 01 00 00 c0 00 25 08 00 58 28 40 00 03:12:15.130 READ FPDMA QUEUED 60 01 00 00 b8 00 25 07 00 58 28 40 00 03:12:15.130 READ FPDMA QUEUED 60 01 00 00 b0 00 25 06 00 58 28 40 00 03:12:15.130 READ FPDMA QUEUED 60 01 00 00 a8 00 25 05 00 58 28 40 00 03:12:15.130 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 964 --- Lifetime Power-On Resets 0x01 0x010 4 7502 --- Power-on Hours 0x01 0x018 6 15176105984 --- Logical Sectors Written 0x01 0x020 6 268720931 --- Number of Write Commands 0x01 0x028 6 12206473216 --- Logical Sectors Read 0x01 0x030 6 136009537 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 2501 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2483 Device-to-host register FISes sent due to a COMRESET 0x000b 4 14 CRC errors within host-to-device FIS 0x000d 4 14 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-1CH164 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC29 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 23:02:18 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 216) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 088 006 - 77803880 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7679 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 088 060 030 - 756464063 9 Power_On_Hours -O--CK 068 068 000 - 28687 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5166 183 Runtime_Bad_Block -O--CK 094 094 000 - 6 184 End-to-End_Error -O--CK 097 097 099 NOW 3 187 Reported_Uncorrect -O--CK 001 001 000 - 4156 188 Command_Timeout -O--CK 100 096 000 - 15 15 21 189 High_Fly_Writes -O-RCK 092 092 000 - 8 190 Airflow_Temperature_Cel -O---K 062 048 045 - 38 (Min/Max 24/41) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1355 193 Load_Cycle_Count -O--CK 065 065 000 - 71600 194 Temperature_Celsius -O---K 038 052 000 - 38 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 4 240 Head_Flying_Hours ------ 100 253 000 - 24248h+09m+38.621s 241 Total_LBAs_Written ------ 100 253 000 - 192641653367 242 Total_LBAs_Read ------ 100 253 000 - 149691045437 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 4159 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4159 [18] occurred at disk power-on lifetime: 1308 hours (54 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 09 7b 42 50 e0 00 01:32:32.461 READ DMA EXT 35 00 00 01 00 00 00 01 cf 29 88 e0 00 01:32:32.460 WRITE DMA EXT 35 00 00 01 00 00 00 01 cf 28 88 e0 00 01:32:32.459 WRITE DMA EXT 35 00 00 01 00 00 00 01 cf 27 88 e0 00 01:32:32.458 WRITE DMA EXT 25 00 00 01 00 00 00 00 96 0e b8 e0 00 01:32:32.458 READ DMA EXT Error 4158 [17] occurred at disk power-on lifetime: 1308 hours (54 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 09 7b 42 50 e0 00 01:32:27.696 READ DMA EXT 35 00 00 01 00 00 00 00 96 0e b8 e0 00 01:32:27.695 WRITE DMA EXT 35 00 00 01 00 00 00 00 96 0d b8 e0 00 01:32:27.694 WRITE DMA EXT 35 00 00 01 00 00 00 00 96 0c b8 e0 00 01:32:27.693 WRITE DMA EXT 25 00 00 01 00 00 00 01 cf 28 88 e0 00 01:32:27.692 READ DMA EXT Error 4157 [16] occurred at disk power-on lifetime: 1308 hours (54 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 09 7b 42 50 e0 00 01:32:22.261 READ DMA EXT 35 00 00 00 08 00 00 0b 87 34 d0 e0 00 01:32:22.261 WRITE DMA EXT 35 00 00 01 00 00 00 01 cf 29 88 e0 00 01:32:22.260 WRITE DMA EXT 35 00 00 01 00 00 00 01 cf 28 88 e0 00 01:32:22.259 WRITE DMA EXT 35 00 00 01 00 00 00 01 cf 27 88 e0 00 01:32:22.258 WRITE DMA EXT Error 4156 [15] occurred at disk power-on lifetime: 1308 hours (54 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 09 7b 42 50 e0 00 01:32:15.263 READ DMA EXT 35 00 00 01 00 00 00 00 96 0e b8 e0 00 01:32:15.262 WRITE DMA EXT 35 00 00 01 00 00 00 00 96 0d b8 e0 00 01:32:15.261 WRITE DMA EXT 35 00 00 01 00 00 00 00 96 0c b8 e0 00 01:32:15.260 WRITE DMA EXT 25 00 00 01 00 00 00 01 ac eb c0 e0 00 01:32:15.259 READ DMA EXT Error 4155 [14] occurred at disk power-on lifetime: 1307 hours (54 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 09 7b 42 50 e0 00 01:23:13.803 READ DMA EXT 35 00 00 00 80 00 00 01 ac ed 40 e0 00 01:23:13.802 WRITE DMA EXT 25 00 00 00 80 00 00 09 7b 41 80 e0 00 01:23:13.802 READ DMA EXT 35 00 00 00 80 00 00 01 ac ec c0 e0 00 01:23:13.799 WRITE DMA EXT 25 00 00 00 80 00 00 09 7b 40 b0 e0 00 01:23:13.798 READ DMA EXT Error 4154 [13] occurred at disk power-on lifetime: 1307 hours (54 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 38 00 00 09 7b 42 50 e0 00 00:45:56.760 READ DMA EXT 25 00 00 00 08 00 00 09 7b 41 f8 e0 00 00:45:56.760 READ DMA EXT 25 00 00 00 08 00 00 00 fc 94 58 e0 00 00:45:56.753 READ DMA EXT 25 00 00 00 18 00 00 00 fc 7f d0 e0 00 00:45:56.746 READ DMA EXT 35 00 00 00 08 00 00 00 67 c5 f0 e0 00 00:45:56.745 WRITE DMA EXT Error 4153 [12] occurred at disk power-on lifetime: 1307 hours (54 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 38 00 00 09 7b 42 50 e0 00 00:45:52.803 READ DMA EXT 25 00 00 00 08 00 00 09 7b 41 f8 e0 00 00:45:52.786 READ DMA EXT 35 00 00 00 20 00 00 09 72 ac c8 e0 00 00:45:52.786 WRITE DMA EXT 25 00 00 00 08 00 00 00 fc 8c 48 e0 00 00:45:52.775 READ DMA EXT 35 00 00 00 08 00 00 00 67 a7 c8 e0 00 00:45:52.774 WRITE DMA EXT Error 4152 [11] occurred at disk power-on lifetime: 1307 hours (54 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 09 7b 42 78 00 00 Error: UNC at LBA = 0x097b4278 = 159072888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 38 00 00 09 7b 42 50 e0 00 00:45:49.136 READ DMA EXT 25 00 00 00 08 00 00 09 7b 41 f8 e0 00 00:45:49.128 READ DMA EXT 25 00 00 00 08 00 00 09 12 f0 e8 e0 00 00:45:49.062 READ DMA EXT 35 00 00 00 08 00 00 00 67 a7 30 e0 00 00:45:49.062 WRITE DMA EXT 35 00 00 00 40 00 00 00 63 31 10 e0 00 00:45:49.061 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 24/41 Celsius Lifetime Min/Max Temperature: 14/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 38 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TEAM T2532TB Serial Number: -- Firmware Version: W0220A0 User Capacity: 2,048,408,248,320 bytes [2.04 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 23:02:18 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 22 12 Power_Cycle_Count -O--CK 100 100 050 - 11 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute PO--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 96 164 Unknown_Attribute -O--CK 100 100 050 - 0 165 Unknown_Attribute -O--CK 100 100 050 - 0 166 Unknown_Attribute -O--CK 100 100 050 - 0 167 Unknown_Attribute -O--CK 100 100 050 - 0 168 Unknown_Attribute -O--CK 100 100 050 - 5050 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 194 Temperature_Celsius -O---K 100 100 050 - 22 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written ----CK 100 100 050 - 21 242 Total_LBAs_Read ----CK 100 100 050 - 16 245 Unknown_Attribute -O--CK 100 100 050 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 22/22 Celsius Lifetime Min/Max Temperature: 20/25 Celsius Specified Max Operating Temperature: 100 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 22 --- Power-on Hours 0x01 0x018 6 1410282 --- Logical Sectors Written 0x01 0x020 6 9444 --- Number of Write Commands 0x01 0x028 6 1080757 --- Logical Sectors Read 0x01 0x030 6 33142 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 37 Device-to-host register FISes sent due to a COMRESET