Probe #21183e7df5 of ASUSTek Z87-C Desktop Computer (All Series)

Log: smartctl

/dev/sda smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A120G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 603ABBF0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jun 17 19:52:17 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 093 093 000 - 6178h+50m+41.790s 12 Power_Cycle_Count -O--CK 098 098 000 - 2518 171 Program_Fail_Count -O-R-- 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 71 177 Wear_Range_Delta ------ 000 000 000 - 0 181 Program_Fail_Count -O-R-- 100 100 000 - 0 182 Erase_Fail_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 189 Airflow_Temperature_Cel ------ 024 034 000 - 24 (Min/Max 13/34) 194 Temperature_Celsius -O---K 024 034 000 - 24 (Min/Max 13/34) 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left ------ 100 100 011 - 4294967296 233 SandForce_Internal -O--CK 000 000 000 - 875 234 SandForce_Internal -O--CK 000 000 000 - 704 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 704 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 748 244 Unknown_Attribute ------ 100 100 010 - 2686997 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 16 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 13/34 Celsius Lifetime Min/Max Temperature: 13/66 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (227) Index Estimated Time Temperature Celsius 228 2020-06-14 12:20 29 ********** 229 2020-06-14 12:30 ? - 230 2020-06-14 12:40 27 ******** 231 2020-06-14 12:50 27 ******** 232 2020-06-14 13:00 28 ********* ... ..( 6 skipped). .. ********* 239 2020-06-14 14:10 28 ********* 240 2020-06-14 14:20 27 ******** ... ..( 4 skipped). .. ******** 245 2020-06-14 15:10 27 ******** 246 2020-06-14 15:20 26 ******* ... ..( 2 skipped). .. ******* 249 2020-06-14 15:50 26 ******* 250 2020-06-14 16:00 ? - 251 2020-06-14 16:10 22 *** 252 2020-06-14 16:20 24 ***** 253 2020-06-14 16:30 25 ****** 254 2020-06-14 16:40 26 ******* ... ..( 3 skipped). .. ******* 258 2020-06-14 17:20 26 ******* 259 2020-06-14 17:30 27 ******** ... ..( 8 skipped). .. ******** 268 2020-06-14 19:00 27 ******** 269 2020-06-14 19:10 28 ********* 270 2020-06-14 19:20 28 ********* 271 2020-06-14 19:30 27 ******** 272 2020-06-14 19:40 28 ********* ... ..( 7 skipped). .. ********* 280 2020-06-14 21:00 28 ********* 281 2020-06-14 21:10 ? - 282 2020-06-14 21:20 26 ******* 283 2020-06-14 21:30 27 ******** 284 2020-06-14 21:40 ? - 285 2020-06-14 21:50 25 ****** 286 2020-06-14 22:00 26 ******* 287 2020-06-14 22:10 27 ******** 288 2020-06-14 22:20 27 ******** 289 2020-06-14 22:30 26 ******* 290 2020-06-14 22:40 27 ******** 291 2020-06-14 22:50 26 ******* ... ..( 3 skipped). .. ******* 295 2020-06-14 23:30 26 ******* 296 2020-06-14 23:40 25 ****** 297 2020-06-14 23:50 25 ****** 298 2020-06-15 00:00 25 ****** 299 2020-06-15 00:10 ? - 300 2020-06-15 00:20 20 * 301 2020-06-15 00:30 ? - 302 2020-06-15 00:40 22 *** 303 2020-06-15 00:50 23 **** 304 2020-06-15 01:00 ? - 305 2020-06-15 01:10 22 *** 306 2020-06-15 01:20 24 ***** 307 2020-06-15 01:30 24 ***** 308 2020-06-15 01:40 25 ****** 309 2020-06-15 01:50 ? - 310 2020-06-15 02:00 23 **** 311 2020-06-15 02:10 24 ***** 312 2020-06-15 02:20 25 ****** 313 2020-06-15 02:30 26 ******* ... ..( 12 skipped). .. ******* 326 2020-06-15 04:40 26 ******* 327 2020-06-15 04:50 27 ******** 328 2020-06-15 05:00 26 ******* ... ..( 3 skipped). .. ******* 332 2020-06-15 05:40 26 ******* 333 2020-06-15 05:50 ? - 334 2020-06-15 06:00 22 *** 335 2020-06-15 06:10 ? - 336 2020-06-15 06:20 22 *** 337 2020-06-15 06:30 23 **** 338 2020-06-15 06:40 23 **** 339 2020-06-15 06:50 24 ***** ... ..( 4 skipped). .. ***** 344 2020-06-15 07:40 24 ***** 345 2020-06-15 07:50 25 ****** ... ..( 18 skipped). .. ****** 364 2020-06-15 11:00 25 ****** 365 2020-06-15 11:10 ? - 366 2020-06-15 11:20 23 **** 367 2020-06-15 11:30 24 ***** 368 2020-06-15 11:40 25 ****** ... ..( 7 skipped). .. ****** 376 2020-06-15 13:00 25 ****** 377 2020-06-15 13:10 26 ******* 378 2020-06-15 13:20 26 ******* 379 2020-06-15 13:30 25 ****** 380 2020-06-15 13:40 26 ******* ... ..( 2 skipped). .. ******* 383 2020-06-15 14:10 26 ******* 384 2020-06-15 14:20 25 ****** 385 2020-06-15 14:30 26 ******* ... ..( 4 skipped). .. ******* 390 2020-06-15 15:20 26 ******* 391 2020-06-15 15:30 25 ****** 392 2020-06-15 15:40 26 ******* 393 2020-06-15 15:50 25 ****** ... ..( 4 skipped). .. ****** 398 2020-06-15 16:40 25 ****** 399 2020-06-15 16:50 ? - 400 2020-06-15 17:00 20 * 401 2020-06-15 17:10 22 *** 402 2020-06-15 17:20 23 **** 403 2020-06-15 17:30 23 **** 404 2020-06-15 17:40 24 ***** ... ..( 6 skipped). .. ***** 411 2020-06-15 18:50 24 ***** 412 2020-06-15 19:00 25 ****** ... ..( 8 skipped). .. ****** 421 2020-06-15 20:30 25 ****** 422 2020-06-15 20:40 24 ***** 423 2020-06-15 20:50 24 ***** 424 2020-06-15 21:00 25 ****** 425 2020-06-15 21:10 25 ****** 426 2020-06-15 21:20 24 ***** ... ..( 8 skipped). .. ***** 435 2020-06-15 22:50 24 ***** 436 2020-06-15 23:00 25 ****** 437 2020-06-15 23:10 24 ***** 438 2020-06-15 23:20 25 ****** ... ..( 15 skipped). .. ****** 454 2020-06-16 02:00 25 ****** 455 2020-06-16 02:10 ? - 456 2020-06-16 02:20 23 **** 457 2020-06-16 02:30 24 ***** 458 2020-06-16 02:40 ? - 459 2020-06-16 02:50 21 ** 460 2020-06-16 03:00 22 *** 461 2020-06-16 03:10 23 **** 462 2020-06-16 03:20 24 ***** 463 2020-06-16 03:30 24 ***** 464 2020-06-16 03:40 25 ****** ... ..( 8 skipped). .. ****** 473 2020-06-16 05:10 25 ****** 474 2020-06-16 05:20 24 ***** ... ..( 3 skipped). .. ***** 0 2020-06-16 06:00 24 ***** 1 2020-06-16 06:10 25 ****** 2 2020-06-16 06:20 ? - 3 2020-06-16 06:30 20 * 4 2020-06-16 06:40 22 *** 5 2020-06-16 06:50 22 *** 6 2020-06-16 07:00 23 **** ... ..( 11 skipped). .. **** 18 2020-06-16 09:00 23 **** 19 2020-06-16 09:10 24 ***** 20 2020-06-16 09:20 24 ***** 21 2020-06-16 09:30 23 **** ... ..( 6 skipped). .. **** 28 2020-06-16 10:40 23 **** 29 2020-06-16 10:50 24 ***** 30 2020-06-16 11:00 23 **** 31 2020-06-16 11:10 24 ***** 32 2020-06-16 11:20 24 ***** 33 2020-06-16 11:30 23 **** 34 2020-06-16 11:40 24 ***** ... ..( 3 skipped). .. ***** 38 2020-06-16 12:20 24 ***** 39 2020-06-16 12:30 23 **** ... ..( 3 skipped). .. **** 43 2020-06-16 13:10 23 **** 44 2020-06-16 13:20 ? - 45 2020-06-16 13:30 19 - 46 2020-06-16 13:40 ? - 47 2020-06-16 13:50 21 ** 48 2020-06-16 14:00 23 **** 49 2020-06-16 14:10 23 **** 50 2020-06-16 14:20 24 ***** 51 2020-06-16 14:30 24 ***** 52 2020-06-16 14:40 24 ***** 53 2020-06-16 14:50 ? - 54 2020-06-16 15:00 25 ****** ... ..( 25 skipped). .. ****** 80 2020-06-16 19:20 25 ****** 81 2020-06-16 19:30 ? - 82 2020-06-16 19:40 24 ***** 83 2020-06-16 19:50 25 ****** ... ..( 14 skipped). .. ****** 98 2020-06-16 22:20 25 ****** 99 2020-06-16 22:30 ? - 100 2020-06-16 22:40 22 *** 101 2020-06-16 22:50 23 **** 102 2020-06-16 23:00 24 ***** 103 2020-06-16 23:10 24 ***** 104 2020-06-16 23:20 25 ****** ... ..( 8 skipped). .. ****** 113 2020-06-17 00:50 25 ****** 114 2020-06-17 01:00 ? - 115 2020-06-17 01:10 23 **** 116 2020-06-17 01:20 24 ***** 117 2020-06-17 01:30 ? - 118 2020-06-17 01:40 20 * 119 2020-06-17 01:50 22 *** 120 2020-06-17 02:00 22 *** 121 2020-06-17 02:10 23 **** ... ..( 3 skipped). .. **** 125 2020-06-17 02:50 23 **** 126 2020-06-17 03:00 24 ***** 127 2020-06-17 03:10 24 ***** 128 2020-06-17 03:20 23 **** 129 2020-06-17 03:30 24 ***** 130 2020-06-17 03:40 ? - 131 2020-06-17 03:50 22 *** 132 2020-06-17 04:00 23 **** 133 2020-06-17 04:10 24 ***** 134 2020-06-17 04:20 25 ****** ... ..( 4 skipped). .. ****** 139 2020-06-17 05:10 25 ****** 140 2020-06-17 05:20 ? - 141 2020-06-17 05:30 24 ***** 142 2020-06-17 05:40 25 ****** 143 2020-06-17 05:50 25 ****** 144 2020-06-17 06:00 26 ******* ... ..( 18 skipped). .. ******* 163 2020-06-17 09:10 26 ******* 164 2020-06-17 09:20 25 ****** 165 2020-06-17 09:30 25 ****** 166 2020-06-17 09:40 ? - 167 2020-06-17 09:50 24 ***** 168 2020-06-17 10:00 25 ****** 169 2020-06-17 10:10 26 ******* 170 2020-06-17 10:20 26 ******* 171 2020-06-17 10:30 ? - 172 2020-06-17 10:40 24 ***** 173 2020-06-17 10:50 ? - 174 2020-06-17 11:00 24 ***** 175 2020-06-17 11:10 25 ****** 176 2020-06-17 11:20 26 ******* 177 2020-06-17 11:30 26 ******* 178 2020-06-17 11:40 27 ******** ... ..( 16 skipped). .. ******** 195 2020-06-17 14:30 27 ******** 196 2020-06-17 14:40 ? - 197 2020-06-17 14:50 25 ****** 198 2020-06-17 15:00 27 ******** 199 2020-06-17 15:10 27 ******** 200 2020-06-17 15:20 28 ********* 201 2020-06-17 15:30 29 ********** ... ..( 4 skipped). .. ********** 206 2020-06-17 16:20 29 ********** 207 2020-06-17 16:30 ? - 208 2020-06-17 16:40 24 ***** 209 2020-06-17 16:50 25 ****** 210 2020-06-17 17:00 26 ******* ... ..( 5 skipped). .. ******* 216 2020-06-17 18:00 26 ******* 217 2020-06-17 18:10 ? - 218 2020-06-17 18:20 21 ** 219 2020-06-17 18:30 23 **** 220 2020-06-17 18:40 ? - 221 2020-06-17 18:50 23 **** 222 2020-06-17 19:00 25 ****** 223 2020-06-17 19:10 25 ****** 224 2020-06-17 19:20 26 ******* 225 2020-06-17 19:30 ? - 226 2020-06-17 19:40 21 ** 227 2020-06-17 19:50 23 **** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2518 --- Lifetime Power-On Resets 0x01 0x010 4 6178 --- Power-on Hours 0x01 0x018 6 1477092703 --- Logical Sectors Written 0x01 0x028 6 1570646602 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 24 --- Current Temperature 0x05 0x010 1 24 --- Average Short Term Temperature 0x05 0x018 1 21 --- Average Long Term Temperature 0x05 0x020 1 63 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 27 --- Highest Average Short Term Temperature 0x05 0x038 1 16 --- Lowest Average Short Term Temperature 0x05 0x040 1 21 --- Highest Average Long Term Temperature 0x05 0x048 1 19 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 4220 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10EFRX-68PJCN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jun 17 19:52:17 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12480) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 143) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 130 121 021 - 4475 4 Start_Stop_Count -O--CK 096 096 000 - 4418 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 10066 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3798 192 Power-Off_Retract_Count -O--CK 200 200 000 - 125 193 Load_Cycle_Count -O--CK 053 053 000 - 443329 194 Temperature_Celsius -O---K 117 106 000 - 26 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 10 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 [9] occurred at disk power-on lifetime: 7059 hours (294 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:08:05.594 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:08:05.594 IDENTIFY DEVICE b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:08:05.173 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:08:05.171 SMART RETURN STATUS b0 00 d0 00 00 00 00 07 c2 4f 00 a7 00 00:08:03.908 SMART READ DATA Error 9 [8] occurred at disk power-on lifetime: 7046 hours (293 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 02:22:27.890 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 02:22:27.889 IDENTIFY DEVICE b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 02:22:27.624 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 02:22:27.622 SMART RETURN STATUS b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 02:22:27.549 SMART READ DATA Error 8 [7] occurred at disk power-on lifetime: 7044 hours (293 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:29:05.544 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:29:05.543 IDENTIFY DEVICE b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:29:05.174 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:29:05.172 SMART RETURN STATUS b0 00 d0 00 00 00 00 0f c2 4f 00 af 00 00:29:05.141 SMART READ DATA Error 7 [6] occurred at disk power-on lifetime: 7043 hours (293 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:15:07.489 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:15:07.488 IDENTIFY DEVICE b0 00 d5 00 01 00 00 00 c2 4f 88 a0 00 00:15:07.200 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 88 a0 00 00:15:06.155 SMART READ LOG b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:15:04.915 SMART READ DATA Error 6 [5] occurred at disk power-on lifetime: 7043 hours (293 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:15:02.041 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:15:02.027 IDENTIFY DEVICE b0 00 d0 00 00 00 00 0a c2 4f 00 aa 00 00:15:01.298 SMART READ DATA b0 00 d0 00 00 00 00 0a c2 4f 00 aa 00 00:15:01.296 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:15:01.263 SMART RETURN STATUS Error 5 [4] occurred at disk power-on lifetime: 7043 hours (293 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:14:49.489 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:14:49.489 IDENTIFY DEVICE b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:14:47.239 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:14:47.237 SMART RETURN STATUS b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:14:47.164 SMART READ DATA Error 4 [3] occurred at disk power-on lifetime: 6951 hours (289 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:29:29.129 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:29:29.128 IDENTIFY DEVICE b0 00 d0 00 00 00 00 01 c2 4f 00 a1 00 00:29:27.280 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:29:27.235 SMART RETURN STATUS 60 00 3f 00 38 00 00 5c e4 d5 aa 40 00 00:29:26.977 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 6887 hours (286 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:02.014 SMART WRITE LOG ec 00 00 00 01 00 00 00 00 00 00 a0 00 00:04:02.014 IDENTIFY DEVICE b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:04:01.542 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:04:01.540 SMART RETURN STATUS b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:04:01.434 SMART READ DATA SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/26 Celsius Lifetime Min/Max Temperature: 2/37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (278) Index Estimated Time Temperature Celsius 279 2020-06-17 11:55 30 *********** ... ..( 37 skipped). .. *********** 317 2020-06-17 12:33 30 *********** 318 2020-06-17 12:34 31 ************ ... ..( 4 skipped). .. ************ 323 2020-06-17 12:39 31 ************ 324 2020-06-17 12:40 30 *********** 325 2020-06-17 12:41 31 ************ 326 2020-06-17 12:42 31 ************ 327 2020-06-17 12:43 31 ************ 328 2020-06-17 12:44 30 *********** 329 2020-06-17 12:45 31 ************ 330 2020-06-17 12:46 30 *********** 331 2020-06-17 12:47 31 ************ ... ..( 3 skipped). .. ************ 335 2020-06-17 12:51 31 ************ 336 2020-06-17 12:52 30 *********** 337 2020-06-17 12:53 31 ************ 338 2020-06-17 12:54 31 ************ 339 2020-06-17 12:55 30 *********** 340 2020-06-17 12:56 30 *********** 341 2020-06-17 12:57 31 ************ 342 2020-06-17 12:58 31 ************ 343 2020-06-17 12:59 30 *********** 344 2020-06-17 13:00 31 ************ 345 2020-06-17 13:01 31 ************ 346 2020-06-17 13:02 30 *********** 347 2020-06-17 13:03 31 ************ ... ..( 27 skipped). .. ************ 375 2020-06-17 13:31 31 ************ 376 2020-06-17 13:32 30 *********** 377 2020-06-17 13:33 31 ************ ... ..( 2 skipped). .. ************ 380 2020-06-17 13:36 31 ************ 381 2020-06-17 13:37 30 *********** 382 2020-06-17 13:38 31 ************ 383 2020-06-17 13:39 31 ************ 384 2020-06-17 13:40 31 ************ 385 2020-06-17 13:41 30 *********** 386 2020-06-17 13:42 31 ************ ... ..( 22 skipped). .. ************ 409 2020-06-17 14:05 31 ************ 410 2020-06-17 14:06 30 *********** 411 2020-06-17 14:07 31 ************ ... ..( 24 skipped). .. ************ 436 2020-06-17 14:32 31 ************ 437 2020-06-17 14:33 ? - 438 2020-06-17 14:34 22 *** 439 2020-06-17 14:35 22 *** 440 2020-06-17 14:36 23 **** 441 2020-06-17 14:37 23 **** 442 2020-06-17 14:38 24 ***** 443 2020-06-17 14:39 25 ****** ... ..( 3 skipped). .. ****** 447 2020-06-17 14:43 25 ****** 448 2020-06-17 14:44 26 ******* 449 2020-06-17 14:45 26 ******* 450 2020-06-17 14:46 27 ******** 451 2020-06-17 14:47 28 ********* ... ..( 5 skipped). .. ********* 457 2020-06-17 14:53 28 ********* 458 2020-06-17 14:54 29 ********** ... ..( 7 skipped). .. ********** 466 2020-06-17 15:02 29 ********** 467 2020-06-17 15:03 30 *********** ... ..( 3 skipped). .. *********** 471 2020-06-17 15:07 30 *********** 472 2020-06-17 15:08 31 ************ ... ..( 11 skipped). .. ************ 6 2020-06-17 15:20 31 ************ 7 2020-06-17 15:21 32 ************* ... ..( 66 skipped). .. ************* 74 2020-06-17 16:28 32 ************* 75 2020-06-17 16:29 ? - 76 2020-06-17 16:30 22 *** 77 2020-06-17 16:31 22 *** 78 2020-06-17 16:32 22 *** 79 2020-06-17 16:33 23 **** 80 2020-06-17 16:34 24 ***** ... ..( 2 skipped). .. ***** 83 2020-06-17 16:37 24 ***** 84 2020-06-17 16:38 25 ****** 85 2020-06-17 16:39 26 ******* 86 2020-06-17 16:40 26 ******* 87 2020-06-17 16:41 27 ******** 88 2020-06-17 16:42 27 ******** 89 2020-06-17 16:43 27 ******** 90 2020-06-17 16:44 28 ********* ... ..( 15 skipped). .. ********* 106 2020-06-17 17:00 28 ********* 107 2020-06-17 17:01 29 ********** ... ..( 12 skipped). .. ********** 120 2020-06-17 17:14 29 ********** 121 2020-06-17 17:15 30 *********** ... ..( 46 skipped). .. *********** 168 2020-06-17 18:02 30 *********** 169 2020-06-17 18:03 29 ********** 170 2020-06-17 18:04 30 *********** 171 2020-06-17 18:05 ? - 172 2020-06-17 18:06 19 - 173 2020-06-17 18:07 19 - 174 2020-06-17 18:08 20 * 175 2020-06-17 18:09 21 ** 176 2020-06-17 18:10 21 ** 177 2020-06-17 18:11 22 *** 178 2020-06-17 18:12 22 *** 179 2020-06-17 18:13 22 *** 180 2020-06-17 18:14 23 **** 181 2020-06-17 18:15 23 **** 182 2020-06-17 18:16 24 ***** 183 2020-06-17 18:17 24 ***** 184 2020-06-17 18:18 24 ***** 185 2020-06-17 18:19 25 ****** 186 2020-06-17 18:20 25 ****** 187 2020-06-17 18:21 25 ****** 188 2020-06-17 18:22 ? - 189 2020-06-17 18:23 20 * 190 2020-06-17 18:24 21 ** 191 2020-06-17 18:25 21 ** 192 2020-06-17 18:26 21 ** 193 2020-06-17 18:27 22 *** 194 2020-06-17 18:28 23 **** 195 2020-06-17 18:29 23 **** 196 2020-06-17 18:30 24 ***** ... ..( 3 skipped). .. ***** 200 2020-06-17 18:34 24 ***** 201 2020-06-17 18:35 25 ****** 202 2020-06-17 18:36 25 ****** 203 2020-06-17 18:37 26 ******* 204 2020-06-17 18:38 26 ******* 205 2020-06-17 18:39 26 ******* 206 2020-06-17 18:40 27 ******** ... ..( 3 skipped). .. ******** 210 2020-06-17 18:44 27 ******** 211 2020-06-17 18:45 28 ********* ... ..( 8 skipped). .. ********* 220 2020-06-17 18:54 28 ********* 221 2020-06-17 18:55 29 ********** ... ..( 14 skipped). .. ********** 236 2020-06-17 19:10 29 ********** 237 2020-06-17 19:11 ? - 238 2020-06-17 19:12 22 *** 239 2020-06-17 19:13 22 *** 240 2020-06-17 19:14 22 *** 241 2020-06-17 19:15 23 **** 242 2020-06-17 19:16 23 **** 243 2020-06-17 19:17 24 ***** ... ..( 3 skipped). .. ***** 247 2020-06-17 19:21 24 ***** 248 2020-06-17 19:22 25 ****** 249 2020-06-17 19:23 25 ****** 250 2020-06-17 19:24 26 ******* 251 2020-06-17 19:25 29 ********** ... ..( 14 skipped). .. ********** 266 2020-06-17 19:40 29 ********** 267 2020-06-17 19:41 30 *********** ... ..( 10 skipped). .. *********** 278 2020-06-17 19:52 30 *********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 733 Vendor specific /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 PRO 128GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM04B6Q User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jun 17 19:52:17 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6432 12 Power_Cycle_Count -O--CK 097 097 000 - 2607 177 Wear_Leveling_Count PO--C- 099 099 000 - 4 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 075 066 000 - 25 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 55 241 Total_LBAs_Written -O--CK 099 099 000 - 631923941 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xa5 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/37335 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2020-06-16 22:40 ? - ... ..(125 skipped). .. - 0 2020-06-17 19:40 ? - 1 2020-06-17 19:50 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 Device Model: ST3200826AS Serial Number: -- Firmware Version: 3.02 User Capacity: 200,049,647,616 bytes [200 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Jun 17 19:52:17 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 67) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 057 049 006 - 137643603 3 Spin_Up_Time PO---- 098 098 000 - 0 4 Start_Stop_Count -O--CK 088 088 020 - 12507 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 136769093 9 Power_On_Hours -O--CK 076 076 000 - 21585 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 087 087 020 - 13865 194 Temperature_Celsius -O---K 028 042 000 - 28 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 057 048 000 - 137643603 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15306 - # 2 Short offline Completed without error 00% 15306 - # 3 Short offline Completed without error 00% 10076 - # 4 Extended offline Aborted by host 80% 3653 - # 5 Extended offline Aborted by host 50% 3651 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read SATA Phy Event Counters failed


Hardware for Linux and BSD

GitHub